Last modified by Kilight Cao on 2025/02/07 08:57
<
From version < 143.1 >
edited by Kilight Cao
on 2023/11/16 16:28
To version < 127.7 >
edited by Xiaoling
on 2022/07/29 15:27
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoling
Content
... ... @@ -15,8 +15,13 @@
15 15  
16 16  
17 17  
18 +
19 +
20 +
21 +
18 18  = 1.  Introduction =
19 19  
24 +
20 20  == 1.1  What is the LG308N ==
21 21  
22 22  
... ... @@ -45,6 +45,7 @@
45 45  [[image:1657010949218-224.png]]
46 46  
47 47  
53 +
48 48  == 1.2  Specifications ==
49 49  
50 50  
... ... @@ -102,7 +102,6 @@
102 102  * Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
103 103  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
104 104  
105 -
106 106  == 1.3  Features ==
107 107  
108 108  
... ... @@ -112,13 +112,13 @@
112 112  * LoRaWAN Gateway
113 113  * 10 programmable parallel demodulation paths
114 114  
115 -
116 116  == 1.4  Hardware System Structure ==
117 117  
118 118  
119 -[[image:image-20221101103113-1.png]]
123 +[[image:1657011152828-178.png]]
120 120  
121 121  
126 +
122 122  == 1.5  LG308N Applications ==
123 123  
124 124  
... ... @@ -125,6 +125,7 @@
125 125  [[image:1657011208596-209.png]]
126 126  
127 127  
133 +
128 128  == 1.6  LED Indicators ==
129 129  
130 130  
... ... @@ -145,22 +145,12 @@
145 145  )))
146 146  
147 147  
148 -== 1.7 Button Instruction ==
154 +(((
155 +(((
156 +
157 +)))
158 +)))
149 149  
150 -
151 -LG308N has a black toggle button, which is:
152 -
153 -
154 -(% style="color:blue" %)**//➢ //Long press 4-5s:                     **(%%)the gateway will reload the Network and Initialize wifi configuration
155 -
156 - **LED status: ** SYS LED will BLINKING RED Until the reload is finished.
157 -
158 -
159 -(% style="color:blue" %)**➢ Long press more than 30s:    **(%%)the gateway will restart and restore factory settings.
160 -
161 - **LED status: ** When the user releases the button, the LED will TURN OFF.
162 -
163 -
164 164  = 2.  Access and Configure LG308N =
165 165  
166 166  
... ... @@ -167,17 +167,17 @@
167 167  The LG308N is configured as a WiFi Access Point by default. User can access and configure the LG308N after connecting to its WiFi network, or via its Ethernet port.
168 168  
169 169  
166 +
170 170  == 2.1  Find IP address of LG308N ==
171 171  
169 +
172 172  === 2.1.1  Connect via WiFi ===
173 173  
174 -
175 175  [[image:1657011715859-829.png]]
176 176  
177 177  
178 178  At the first boot of LG308N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
179 179  
180 -
181 181  (% style="color:red" %)**Note: In latest version firmware, it has been password protected and the password is:  **(% style="background-color:yellow" %)**dragino+dragino**
182 182  
183 183  
... ... @@ -187,6 +187,7 @@
187 187  (((
188 188  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LG308N has the default IP (% style="color:green" %)**10.130.1.1**
189 189  
186 +
190 190  
191 191  )))
192 192  
... ... @@ -195,10 +195,12 @@
195 195  
196 196  [[image:1657011966663-484.png]]
197 197  
198 -
199 199  (((
200 200  Alternatively, connect the LG308N** __WAN port__** to your router and LG308N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG308N. You can also use this IP to connect.
197 +)))
201 201  
199 +
200 +(((
202 202  
203 203  )))
204 204  
... ... @@ -207,12 +207,12 @@
207 207  
208 208  [[image:1657012061799-674.png]]
209 209  
210 -
211 211  (((
212 212  The LG308N __**LAN port**__ is configured as DHCP router by default, user can connect the PC to LAN port and set PC to DHCP mode, it will get IP from LAN port and be able to access to the device. The default IP in LAN port is 10.130.1.1
213 213  )))
214 214  
215 215  
214 +
216 216  === 2.1.4  Connect WiFi with DHCP IP from router ===
217 217  
218 218  
... ... @@ -222,12 +222,14 @@
222 222  If the LG308N already connect to the router via WiFi, use can use the WiFi IP to connect to LG308N.
223 223  
224 224  
224 +
225 225  === 2.1.5  Connect via LAN port by fall back ip ===
226 226  
227 227  
228 -The **LAN port** also has a [[fall back ip address>>doc:||anchor="H11.3A0IconfiguredLG308NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router.
228 +The **LAN port** also has a [[fall back ip address>>path:#fallback_ip]] for access if user doesn't connect to uplink router.
229 229  
230 230  
231 +
231 231  == 2.2  Access Configure Web UI ==
232 232  
233 233  
... ... @@ -239,7 +239,7 @@
239 239  
240 240  or
241 241  
242 -http:~/~/IP_ADDRESS or http:~/~/ IP_ADDRESS:8000
243 +http:~/~/IP_ADDRESS or [[http:~~/~~/ IP_ADDRESS:8000>>url:http://192.168.1.xx:8000]]
243 243  
244 244  
245 245  You will see the login interface of DLOS8N as shown below.
... ... @@ -250,12 +250,13 @@
250 250  
251 251  (% style="color:#4f81bd" %)**Password:   dragino**
252 252  
253 -
254 254  [[image:1652414287022-223.png]]
255 255  
256 256  
257 +
257 257  = 3.  Typical Network Setup =
258 258  
260 +
259 259  == 3.1  Overview ==
260 260  
261 261  
... ... @@ -268,16 +268,15 @@
268 268  * **WiFi AP Mode**
269 269  * **Cellular Mode**
270 270  
271 -
272 272  == 3.2  Use WAN port to access Internet ==
273 273  
274 274  
275 275  By default, the LG308N is set to use the WAN port to connect to an upstream network. When you connect the LG308N's WAN port to an upstream router, LG308N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
276 276  
277 -
278 278  [[image:1657012559318-672.png]]
279 279  
280 280  
281 +
281 281  == 3.3  Access the Internet as a WiFi Client ==
282 282  
283 283  
... ... @@ -287,11 +287,12 @@
287 287  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
288 288  )))
289 289  
290 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916142159-25.png?rev=1.1||alt="image-20220916142159-25.png" height="398" width="859"]]
291 +[[image:1657012573321-862.png]]
291 291  
292 292  (((
293 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
294 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply** to connect.
294 294  
296 +
295 295  
296 296  )))
297 297  
... ... @@ -308,6 +308,7 @@
308 308  [[image:image-20220705171836-8.png]]
309 309  
310 310  
313 +
311 311  (((
312 312  The set up page is (% style="color:#4f81bd" %)**System ~-~-> Cellular**
313 313  )))
... ... @@ -319,10 +319,11 @@
319 319  )))
320 320  
321 321  (((
322 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916141840-23.png?rev=1.1||alt="image-20220916141840-23.png" height="356" width="868"]]
325 +[[image:image-20220705171919-9.png]]
323 323  )))
324 324  
325 325  
329 +
326 326  == 3.5  Check Internet connection ==
327 327  
328 328  
... ... @@ -335,35 +335,30 @@
335 335  [[image:1657012821329-972.png]]
336 336  
337 337  
342 +
338 338  = 4.  Example: Configure as a LoRaWAN gateway =
339 339  
340 340  
341 341  LG308N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
342 342  
343 -
344 344  (((
345 345  [[image:1657012860422-990.png]]
346 -
347 -
348 348  )))
349 349  
350 350  This chapter describes how to use the LG308N to work with(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
351 351  
352 352  
355 +
353 353  == 4.1  Create a gateway in TTN V3 Server ==
354 354  
355 355  
356 356  (((
357 357  (% style="color:blue" %)**Step 1: Get a Unique gateway ID.**
358 -
359 -
360 360  )))
361 361  
362 362  (((
363 363  (((
364 364  Every LG308N has a unique gateway id. The ID can be found at LoRaWAN page:
365 -
366 -
367 367  )))
368 368  )))
369 369  
... ... @@ -379,10 +379,8 @@
379 379  
380 380  (% style="color:blue" %)**Step 2: Sign up a user account in TTN server**
381 381  
382 -
383 383  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
384 384  
385 -
386 386  [[image:1652422127479-258.png||height="346" width="738"]]
387 387  
388 388  
... ... @@ -389,11 +389,8 @@
389 389  
390 390  (% style="color:blue" %)**Step 3: Choose the TTNv3 Cluster Picker**
391 391  
392 -
393 393  (((
394 394  [[image:1652422142236-792.png||height="356" width="737"]]
395 -
396 -
397 397  )))
398 398  
399 399  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
... ... @@ -406,12 +406,10 @@
406 406  
407 407  (% style="color:blue" %)**Step 4: Create a Gateway**
408 408  
409 -
410 410  [[image:1652422440891-514.png||height="360" width="747"]]
411 411  
412 412  Click the Gateway icon and then click Add gateway.
413 413  
414 -
415 415  Open the following page:
416 416  
417 417   [[image:1652422470352-518.png||height="391" width="716"]]
... ... @@ -428,10 +428,10 @@
428 428  
429 429  After creating the gateway, you can see the gateway info, as below.
430 430  
431 -
432 432  [[image:1652422509034-682.png||height="299" width="739"]]
433 433  
434 434  
426 +
435 435  == 4.2  Configure LG308N to connect to TTN v3 ==
436 436  
437 437  
... ... @@ -444,7 +444,7 @@
444 444  )))
445 445  
446 446  (((
447 -Choose the right server provider and click (% style="color:blue" %)**Save&Apply.**
439 +Choose the right server provider and click (% style="color:blue" %)**Save&Apply**
448 448  
449 449  
450 450  )))
... ... @@ -457,17 +457,15 @@
457 457  
458 458  In the home page, we can see the LoRaWAN connection is ready now.
459 459  
452 +[[image:1657014479765-850.png]]
460 460  
461 -[[image:image-20220916171413-2.png]]
462 462  
463 -
464 -
465 465  In TTN v3 portal, we can also see the gateway is connected.
466 466  
467 -
468 468  [[image:1652422703020-955.png||height="343" width="730"]]
469 469  
470 470  
460 +
471 471  == 4.3  Configure frequency ==
472 472  
473 473  
... ... @@ -482,6 +482,7 @@
482 482   [[image:1652422763536-750.png||height="514" width="730"]]
483 483  
484 484  
475 +
485 485  == 4.4  Add a LoRaWAN End Device ==
486 486  
487 487  
... ... @@ -511,15 +511,13 @@
511 511  
512 512  
513 513  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
514 -
515 -
516 516  )))
517 517  
518 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20230426083319-1.png?width=556&height=258&rev=1.1||alt="image-20230426083319-1.png"]]
507 +[[image:1652422840936-838.png]]
519 519  
520 520  
521 521  (((
522 -(% style="color:red" %)**Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.**
511 +(% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
523 523  
524 524  
525 525  )))
... ... @@ -585,19 +585,22 @@
585 585  [[image:1652423277549-324.png||height="273" width="745"]]
586 586  
587 587  
577 +
588 588  = 5.  Web Configure Pages =
589 589  
580 +
590 590  == 5.1  Home ==
591 591  
592 592  
593 593  Shows the system running status.
594 594  
595 -
596 596  [[image:1657014949846-507.png]]
597 597  
598 598  
589 +
599 599  == 5.2  LoRa Settings ==
600 600  
592 +
601 601  === 5.2.1  LoRa ~-~-> LoRa ===
602 602  
603 603  
... ... @@ -614,16 +614,14 @@
614 614  
615 615  (((
616 616  After user choose the frequency plan, he can see the actually frequency in used by checking the page (% style="color:blue" %)**LogRead ~-~-> LoRa Log**
617 -
618 -
619 619  )))
620 620  
621 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LG308N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652422737399-529.png?rev=1.1||alt="1652422737399-529.png"]]
611 +[[image:1652423554776-574.png||height="380" width="740"]]
622 622  
623 -
624 624  (% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
625 625  
626 626  
616 +
627 627  === 5.2.2  LoRa ~-~-> ABP Decryption ===
628 628  
629 629  
... ... @@ -636,24 +636,23 @@
636 636  
637 637  
638 638  Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
639 -
640 -
641 641  )))
642 642  
643 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916114346-7.png?rev=1.1||alt="image-20220916114346-7.png" height="359" width="876"]]
631 +[[image:1652423628833-467.png||height="357" width="755"]]
644 644  
645 645  
634 +
646 646  == 5.3  LoRaWAN Settings ==
647 647  
637 +
648 648  === 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
649 649  
650 650  
651 -This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc.
641 +This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc
652 652  
643 +[[image:1652423628833-467.png||height="357" width="755"]]
653 653  
654 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916114929-8.png?rev=1.1||alt="image-20220916114929-8.png" height="707" width="860"]]
655 655  
656 -
657 657  (% style="color:red" %)**Note:**
658 658  
659 659  ~*: User can ignore the latitude and longitude settings here, LG308N will use the actually value from GPS module.
... ... @@ -663,27 +663,17 @@
663 663  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
664 664  
665 665  
666 -=== 5.3.2  LoRaWAN ~-~-> LoRaWAN ~-~- Basic Station ===
667 667  
656 +=== 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
668 668  
669 -[[image:image-20230406173729-1.png]]
670 670  
659 +[[image:1652428499323-384.png||height="275" width="723"]]
671 671  
672 -The basic station mode support **TTN/AWS/Chirpstack/ThingPark/Senet** Platform.
673 673  
674 -Instruction:
662 +(((
663 +Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
675 675  
676 - [[The Thing Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20TTN/#H3.A0GatewayRegistrationforBasicsStation]]      
677 677  
678 - [[AWS-IoT LoRaWAN Core>>url:http://wiki.dragino.com/xwiki/bin/view/Main/AWS%20IoT%20Core%20for%20LoRaWAN/]]
679 -
680 - [[Chirpstack>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H3.A0GatewayRegistrationforBasicsStation]]
681 -
682 - ThingPark
683 -
684 - [[Senet>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Connection%20to%20Senet/#H3.A0SemtechBasicStation]]
685 -
686 -(((
687 687  
688 688  )))
689 689  
... ... @@ -696,13 +696,12 @@
696 696  
697 697  (((
698 698  Instruction: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
699 -
700 -
701 701  )))
702 702  
703 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916115143-9.png?rev=1.1||alt="image-20220916115143-9.png" height="316" width="864"]](% style="display:none" %)
680 +[[image:1652428648903-878.png||height="266" width="731"]]
704 704  
705 705  
683 +
706 706  == 5.4  MQTT Settings ==
707 707  
708 708  
... ... @@ -718,29 +718,30 @@
718 718  [[image:1652428705046-212.png||height="417" width="733"]]
719 719  
720 720  
699 +
721 721  == 5.5  System ==
722 722  
702 +
723 723  === 5.5.1  System ~-~-> System Overview ===
724 724  
725 725  
726 726  Shows the system info:
727 727  
708 +[[image:1652428773760-580.png||height="408" width="728"]]
728 728  
729 -[[image:image-20220916173046-3.png||height="613" width="868"]]
730 730  
731 731  
732 732  === 5.5.2  System ~-~-> General ( login settings) ===
733 733  
734 734  
735 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916134411-11.png?rev=1.1||alt="image-20220916134411-11.png" height="499" width="865"]](% style="display:none" %)
715 +[[image:1652428861256-300.png||height="354" width="724"]]
736 736  
737 -
738 738  (((
739 739  (% style="color:#037691" %)**__System Password:__**
740 740  )))
741 741  
742 742  (((
743 -There are two login for DLOS8: (% style="color:#4f81bd" %)**root /dragino** (% style="color:black" %)or (% style="color:#4f81bd" %)**admin /dragino**. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
722 +There are two login for DLOS8: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
744 744  )))
745 745  
746 746  (((
... ... @@ -754,6 +754,7 @@
754 754  (((
755 755  (% style="color:#037691" %)**__Port forwarding: __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
756 756  
736 +
757 757  
758 758  )))
759 759  
... ... @@ -760,7 +760,7 @@
760 760  === 5.5.3  System ~-~-> Network ===
761 761  
762 762  
763 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916134642-12.png?rev=1.1||alt="image-20220916134642-12.png" height="411" width="873"]]
743 +[[image:1652429149053-824.png||height="467" width="725"]]
764 764  
765 765  
766 766  (((
... ... @@ -776,32 +776,34 @@
776 776  )))
777 777  
778 778  
759 +
779 779  === 5.5.4  System ~-~-> WiFi ===
780 780  
781 781  
782 782  LG308N WiFi Settings.
783 783  
784 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916134831-13.png?rev=1.1||alt="image-20220916134831-13.png" height="408" width="870"]]
765 +[[image:1652429430767-921.png||height="367" width="723"]]
785 785  
786 786  
768 +
787 787  === 5.5.5  System ~-~-> Cellular ===
788 788  
789 789  
790 790  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
791 791  
774 +[[image:1652429309615-825.png||height="320" width="732"]]
792 792  
793 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916135100-14.png?rev=1.1||alt="image-20220916135100-14.png" height="347" width="874"]](% style="display:none" %)
794 -
795 -
796 796  (% style="color:red" %)**Note *: For LG308N which doesn't have the cellular module, this page will shows Cellular not detected.**
797 797  
798 798  
779 +
799 799  === 5.5.6  System ~-~-> Network Status ===
800 800  
801 801  
802 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916135207-15.png?rev=1.1||alt="image-20220916135207-15.png" height="599" width="882"]]
783 +[[image:1652429486609-208.png||height="415" width="728"]]
803 803  
804 804  
786 +
805 805  === 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
806 806  
807 807  
... ... @@ -813,21 +813,19 @@
813 813  
814 814  [[image:1652429537849-154.png||height="339" width="722"]]
815 815  
816 -
817 817  Please see this document for detail:
818 818  
819 819  [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
820 820  
821 821  
822 -R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Monitor & Remote Access Gateway.WebHome]]**
803 +R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Remote Access Gateway.WebHome]]**
823 823  
824 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140017-16.png?rev=1.1||alt="image-20220916140017-16.png" height="593" width="872"]]
805 +[[image:1652429624400-864.png||height="432" width="716"]]
825 825  
826 -(% style="display:none" %) (%%)
827 827  
808 +
828 828  === 5.5.8  System ~-~-> Firmware Upgrade ===
829 829  
830 -
831 831  We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
832 832  
833 833  * **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
... ... @@ -841,39 +841,30 @@
841 841  
842 842  
843 843  (((
844 -The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(%%)is the upgrade Image. There are different methods to upgrade, as below.
824 +The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
845 845  )))
846 846  
847 847  (((
848 848  (% style="color:green" %)**Web~-~-> System~-~-> Firmware Upgrade**
849 -
850 -
851 851  )))
852 852  
853 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140103-17.png?rev=1.1||alt="image-20220916140103-17.png" height="274" width="871"]]
831 +[[image:1652429711145-862.png||height="270" width="737"]]
854 854  
855 855  
856 856  (((
857 -Select the required image and click (% style="color:blue" %)**Flash Image.**(%%) The image will be uploaded to the device, and then click (% style="color:blue" %)**Process Update** (%%)to upgrade.
858 -
859 -
835 +Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
860 860  )))
861 861  
862 862  (((
863 -(% style="color:red" %)**NOTE**: (%%)You normally need to (% style="color:blue" %)**//uncheck//**(%%) the (% style="color:blue" %)**Preserve Settings**(%%) checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
864 -
865 -
839 +(% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
866 866  )))
867 867  
868 868  (((
869 869  The system will automatically boot into the new firmware after upgrade.
870 -
871 -
872 872  )))
873 873  
874 874  [[image:1652429962190-224.png||height="358" width="729"]]
875 875  
876 -
877 877  (% style="color:red" %)**NOTE***(%%): User can also upgrade firmware via Linux console
878 878  
879 879  SCP the firmware to the system(% style="color:green" %)**/var**(%%)** **directory and then run
... ... @@ -884,161 +884,68 @@
884 884  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
885 885  
886 886  
858 +
887 887  === 5.5.9  System ~-~-> Reboot/Reset ===
888 888  
861 +[[image:1652430197132-330.png||height="256" width="724"]]
889 889  
890 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140312-18.png?rev=1.1||alt="image-20220916140312-18.png" height="274" width="873"]]
891 -
892 892  (((
893 893  
865 +
866 +
894 894  )))
895 895  
896 896  === 5.5.10  System ~-~-> Package Maintain ===
897 897  
871 +[[image:1652430243826-126.png||height="289" width="723"]]
898 898  
899 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140421-19.png?rev=1.1||alt="image-20220916140421-19.png" height="687" width="868"]]
900 -
901 -
902 902  Place to show what package has installed and possible to upgrade packages.
903 903  
904 904  
876 +
905 905  == 5.6  LogRead ==
906 906  
907 907  === 5.6.1  LogRead ~-~-> LoRa Log ===
908 908  
909 -
910 910  Show the frequency for LoRa Radio and traffics.
911 911  
883 +[[image:1657069890320-513.png]]
912 912  
913 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140549-20.png?rev=1.1||alt="image-20220916140549-20.png" height="734" width="883"]]
914 914  
915 915  
887 +
916 916  === 5.6.2  LogRead ~-~-> System Log ===
917 917  
918 -
919 919  Show the system log
920 920  
892 +[[image:1657069922599-794.png]]
921 921  
922 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140732-21.png?rev=1.1||alt="image-20220916140732-21.png" height="706" width="867"]]
923 923  
924 924  
925 925  = 6.  More features =
926 926  
927 -== 6.1 Packet Filtering ==
898 +== 6.1  More instructions ==
928 928  
929 -
930 -Drop unwanted packets.
931 -
932 -See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]
933 -
934 -
935 -== 6.2 Remote Access ==
936 -
937 -
938 -Remote Access Devices for management.
939 -
940 -Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access]]
941 -
942 -
943 -== 6.3 How to decode ABP LoRaWAN node ==
944 -
945 -
946 -Decode ABP:
947 -
948 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20~~-~~--%20LG308/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20---%20LG308/]]
949 -
950 -
951 -== 6.4 How to set data to MQTT broker ==
952 -
953 -
954 -Only support ABP LoRaWAN End Node
955 -
956 -Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]
957 -
958 -
959 -== 6.5 How the gateway connects to Chirpstack v3/v4 via gateway-bridge ==
960 -
961 -
962 -**For Chirpstack v3 Gateway-bridge**:
963 -
964 -The corresponding gateway firmware must be used :
965 -
966 -[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge~~-~~-build-v5.4.1679487778-20230322-2024/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge--build-v5.4.1679487778-20230322-2024/]]
967 -
968 -Chirpstack v3 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge]]
969 -
970 -
971 -**For Chirpstack v4 Gateway-bridge**:
972 -
973 -The corresponding gateway firmware must be used :
974 -
975 -[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V4~~-~~-build-v5.4.1670655072-20221210-1452/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V4--build-v5.4.1670655072-20221210-1452/]]
976 -
977 -Chirpstack v4 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge]]
978 -
979 -
980 -(% style="color:red" %)**NOTE***(%%): Different chirpstack versions use different gateway-bridge configurations.
981 -
982 -After updating the Chirpstack gateway-bridge firmware, there is no need to re-download and install the Chirpstack gateway-bridge package
983 -
984 -
985 -== 6.6  How to extend the gateway size of memory with USB device (SD/TF card, USB flash drive). ==
986 -
987 -
988 -USB card reader plugged into the USB port of the gateway
989 -
990 -Access the gateway Linux Command Line
991 -
992 -
993 -Check the USB device
994 -
995 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425165308-2.png?rev=1.1||alt="image-20230425165308-2.png"]]
996 -
997 -
998 -**Mount the USB device**
999 -
1000 -(% class="box infomessage" %)
1001 -(((
1002 -**mount /dev/sda1 /mnt/**
1003 -)))
1004 -
1005 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425174131-4.png?rev=1.1||alt="image-20230425174131-4.png"]]
1006 -
1007 -
1008 -**Set up the automatic mount on boot**
1009 -
1010 -(% class="box infomessage" %)
1011 -(((
1012 -**sed -i '3cmount \/dev\/sda1 \/mnt\/' /etc/rc.local **
1013 -)))
1014 -
1015 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425173831-3.png?width=833&height=105&rev=1.1||alt="image-20230425173831-3.png"]]
1016 -
1017 -
1018 -== 6.7  More instructions ==
1019 -
1020 -
1021 1021  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
1022 1022  
1023 1023  
903 +
1024 1024  = 7.  Linux System =
1025 1025  
1026 -
1027 1027  The LG308N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
1028 1028  
1029 1029  
1030 1030  == 7.1  SSH Access for Linux console ==
1031 1031  
1032 -
1033 1033  User can access the Linux console via the SSH protocol. Make sure your PC and the LG308N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
1034 1034  
1035 -**IP address:  (% style="color:blue" %)IP address of LG308N(%%)**
913 +IP address:  IP address of LG308N
1036 1036  
1037 -**Port:  (% style="color:blue" %)22 (via WiFi AP mode) or 2222 (via WAN Interface)(%%)**
915 +Port:         22 (via WiFi AP mode) or 2222 (via WAN Interface)
1038 1038  
1039 -**User Name:      (% style="color:blue" %)root(%%)**
917 +User Name:      (% style="color:green" %)**root**
1040 1040  
1041 -**Password:         (% style="color:blue" %)dragino(default)(%%)**
919 +Password:         (% style="color:green" %)**dragino** (% style="color:black" %)(default)
1042 1042  
1043 1043  
1044 1044  After logging in, you will be in the Linux console and can enter commands as shown below.
... ... @@ -1046,15 +1046,14 @@
1046 1046  [[image:1652431588565-830.png]]
1047 1047  
1048 1048  
1049 -The “** (% style="color:blue" %)logread -f"(%%)**command can be used to debug how system runs.
927 +The “(% class="mark" %)**logread -f**(%%)” command can be used to debug how system runs.
1050 1050  
1051 -
1052 1052  [[image:1657070133275-283.png]]
1053 1053  
1054 1054  
932 +
1055 1055  == 7.2  Edit and Transfer files ==
1056 1056  
1057 -
1058 1058  (((
1059 1059  The LG308N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
1060 1060  )))
... ... @@ -1069,8 +1069,6 @@
1069 1069  
1070 1070  (((
1071 1071  Screenshot is as below:
1072 -
1073 -
1074 1074  )))
1075 1075  
1076 1076  [[image:1652431650755-450.png]]
... ... @@ -1078,7 +1078,6 @@
1078 1078  
1079 1079  == 7.3  File System ==
1080 1080  
1081 -
1082 1082  (((
1083 1083  (((
1084 1084  The LG308N has a 16MB flash and a 64MB RAM. The /var and /tmp directory are in the RAM, contents stored in /tmp and /var will be erased after reboot the device. Other directories are in the flash and will keep after reboot.
... ... @@ -1091,11 +1091,11 @@
1091 1091  )))
1092 1092  
1093 1093  
968 +
1094 1094  == 7.4  Package maintenance system ==
1095 1095  
971 +LG308N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
1096 1096  
1097 -LG308N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure LG308N to use **//iperf //**.
1098 -
1099 1099  (((
1100 1100  Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
1101 1101  )))
... ... @@ -1146,6 +1146,7 @@
1146 1146  (((
1147 1147  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
1148 1148  
1023 +
1149 1149  
1150 1150  )))
1151 1151  
... ... @@ -1153,17 +1153,10 @@
1153 1153  
1154 1154  
1155 1155  
1156 -= 9.  OTA System Update =
1031 += 9.  FAQ =
1157 1157  
1033 +== 9.1  How can I configure for a customized frequency band? ==
1158 1158  
1159 -LG308N supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
1160 -
1161 -
1162 -= 10.  FAQ =
1163 -
1164 -== 10.1  How can I configure for a customized frequency band? ==
1165 -
1166 -
1167 1167  (((
1168 1168  See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
1169 1169  )))
... ... @@ -1172,15 +1172,13 @@
1172 1172  
1173 1173  )))
1174 1174  
1175 -== 10.2  Can I connect LG308N to LORIOT? ==
1043 +== 9.2  Can I connect LG308N to LORIOT? ==
1176 1176  
1177 -
1178 1178  Yes, the set up instruction is here: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
1179 1179  
1180 1180  
1181 -== 10.3  Can I make my own firmware for the gateway, where can I find the source code? ==
1048 +== 9.3  Can I make my own firmware for the gateway, where can I find the source code? ==
1182 1182  
1183 -
1184 1184  (((
1185 1185  Yes, You can make your own firmware for the LG308N for branding purposes or to add customized applications.
1186 1186  )))
... ... @@ -1190,15 +1190,13 @@
1190 1190  )))
1191 1191  
1192 1192  
1193 -== 10.4  Can I use 868Mhz version for 915Mhz bands? ==
1059 +== 9.4  Can I use 868Mhz version for 915Mhz bands? ==
1194 1194  
1195 -
1196 1196  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
1197 1197  
1198 1198  
1199 -== 10.5  Can I control the LEDs? ==
1064 +== 9.5  Can I control the LEDs? ==
1200 1200  
1201 -
1202 1202  Except the PWR LED is controlled by +3v3 power directly. All other LEDs can be controlled by developer.
1203 1203  
1204 1204  
... ... @@ -1222,10 +1222,10 @@
1222 1222  OFF: echo 1 > /sys/class/gpio/gpio27/value
1223 1223  
1224 1224  
1225 -= 11.  Trouble Shooting =
1226 1226  
1227 -== 11.1  I get kernel error when install new package, how to fix? ==
1090 += 10.  Trouble Shooting =
1228 1228  
1092 +== 10.1  I get kernel error when install new package, how to fix? ==
1229 1229  
1230 1230  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
1231 1231  
... ... @@ -1248,8 +1248,8 @@
1248 1248  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
1249 1249  
1250 1250  
1251 -== 11.2  How to recover the LG308N if the firmware crashes ==
1252 1252  
1116 +== 10.2  How to recover the LG308N if the firmware crashes ==
1253 1253  
1254 1254  (((
1255 1255  Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
... ... @@ -1259,12 +1259,10 @@
1259 1259  
1260 1260  )))
1261 1261  
1262 -== 11.3  I configured LG308N for WiFi access and lost its IP. What to do now? ==
1126 +== 10.3  I configured LG308N for WiFi access and lost its IP. What to do now? ==
1263 1263  
1264 -
1265 1265  [[image:1657074078183-336.png]]
1266 1266  
1267 -
1268 1268  (((
1269 1269  (((
1270 1270  The LG308N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access LG308N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
... ... @@ -1271,14 +1271,13 @@
1271 1271  )))
1272 1272  )))
1273 1273  
1274 -
1275 1275  (((
1276 -(% style="color:red" %)**Note: fallback IP can be disabled in the WAN and DHCP page.**
1137 +(% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
1277 1277  )))
1278 1278  
1279 1279  
1280 1280  (((
1281 -**Steps to connect via fall back IP:**
1142 +Steps to connect via fall back IP:
1282 1282  )))
1283 1283  
1284 1284  (((
... ... @@ -1287,45 +1287,41 @@
1287 1287  
1288 1288  (((
1289 1289  2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
1290 -
1291 -
1292 1292  )))
1293 1293  
1294 1294  (((
1295 1295  As below photo:
1296 -
1297 -
1298 1298  )))
1299 1299  
1300 1300  [[image:1652435256286-879.png]]
1301 1301  
1302 -
1303 1303  3. In PC, use 172.31.255.254 to access LG308N via Web or Console.
1304 1304  
1305 1305  
1306 -= 12.  Order Info =
1307 1307  
1163 += 11.  Order Info =
1308 1308  
1309 -**PART:(% style="color:blue" %) DLOS8N-XXX-YYY: (%%)**(% style="color:blue" %)
1310 1310  
1311 -(% style="color:blue" %)**XXX:**(%%)** Frequency Band**
1166 +(% style="color:#4f81bd" %)**//PART: DLOS8N-XXX-YYY//: **
1312 1312  
1313 -* (% style="color:red" %)** 868**(%%) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1314 -* (% style="color:red" %)** 915**(%%):  valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1168 +(% style="color:#4f81bd" %)**//XXX: Frequency Band//**
1315 1315  
1170 +* (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1171 +* (% style="color:red" %)** 915**(% style="color:black" %):  valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1172 +
1316 1316  (% style="color:#4f81bd" %)
1317 1317  
1318 -(% style="color:blue" %)**YYY:**(%%)** 4G Cellular Option**
1175 +(% style="color:#4f81bd" %)**//YYY: 4G Cellular Option//**
1319 1319  
1320 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
1321 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America: Verizon, AT&T(FirstNet), U.S.Cellular; Canada: Telus
1322 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1323 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1177 +* (% style="color:red" %)** EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1178 +* (% style="color:red" %)** EC25-A**(% style="color:black" %):  North America/ Rogers/AT&T/T-Mobile.
1179 +* (% style="color:red" %)** EC25-AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1180 +* (% style="color:red" %)** EC25-J**(% style="color:black" %):  Japan, DOCOMO/SoftBank/ KDDI
1324 1324  
1325 1325  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1326 1326  
1327 1327  
1328 -= 13.  Packing Info =
1185 += 12.  Packing Info =
1329 1329  
1330 1330  (((
1331 1331  
... ... @@ -1349,21 +1349,15 @@
1349 1349  * Package Size: 49 x 19.5 x x 19Package Size: 4912 cm
1350 1350  * Weight: 2.5kg
1351 1351  
1209 += 13.  Support =
1352 1352  
1353 -= 14.  Support =
1354 -
1355 -
1356 1356  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1357 -
1358 1358  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
1359 1359  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
1214 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1360 1360  
1361 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to: [[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1216 += 14.  Reference =
1362 1362  
1363 -
1364 -= 15.  Reference =
1365 -
1366 -
1367 1367  * Source code for LG08 LoRa Gateway: [[https:~~/~~/github.com/dragino/openwrt_lede-18.06>>url:https://github.com/dragino/openwrt_lede-18.06]]
1368 1368  
1369 1369  * OpenWrt official Wiki: [[http:~~/~~/www.openwrt.org/>>url:http://www.openwrt.org/]]
1663317843420-717.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -86.8 KB
Content
image-20220916164504-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -42.4 KB
Content
image-20220916171413-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -143.3 KB
Content
image-20220916173046-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -142.9 KB
Content
image-20221101103113-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230406173729-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -85.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0