Last modified by Kilight Cao on 2025/02/07 08:57
<
From version < 142.8 >
edited by Xiaoling
on 2023/06/10 16:58
To version < 127.7 >
edited by Xiaoling
on 2022/07/29 15:27
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -15,8 +15,13 @@
15 15  
16 16  
17 17  
18 +
19 +
20 +
21 +
18 18  = 1.  Introduction =
19 19  
24 +
20 20  == 1.1  What is the LG308N ==
21 21  
22 22  
... ... @@ -45,6 +45,7 @@
45 45  [[image:1657010949218-224.png]]
46 46  
47 47  
53 +
48 48  == 1.2  Specifications ==
49 49  
50 50  
... ... @@ -102,8 +102,6 @@
102 102  * Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
103 103  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
104 104  
105 -
106 -
107 107  == 1.3  Features ==
108 108  
109 109  
... ... @@ -113,14 +113,13 @@
113 113  * LoRaWAN Gateway
114 114  * 10 programmable parallel demodulation paths
115 115  
116 -
117 -
118 118  == 1.4  Hardware System Structure ==
119 119  
120 120  
121 -[[image:image-20221101103113-1.png]]
123 +[[image:1657011152828-178.png]]
122 122  
123 123  
126 +
124 124  == 1.5  LG308N Applications ==
125 125  
126 126  
... ... @@ -127,6 +127,7 @@
127 127  [[image:1657011208596-209.png]]
128 128  
129 129  
133 +
130 130  == 1.6  LED Indicators ==
131 131  
132 132  
... ... @@ -147,22 +147,12 @@
147 147  )))
148 148  
149 149  
150 -== 1.7 Button Instruction ==
154 +(((
155 +(((
156 +
157 +)))
158 +)))
151 151  
152 -
153 -LG308N has a black toggle button, which is:
154 -
155 -
156 -(% style="color:blue" %)**//➢ //Long press 4-5s:                     **(%%)the gateway will reload the Network and Initialize wifi configuration
157 -
158 - **LED status: ** SYS LED will BLINKING RED Until the reload is finished.
159 -
160 -
161 -(% style="color:blue" %)**➢ Long press more than 30s:    **(%%)the gateway will restart and restore factory settings.
162 -
163 - **LED status: ** When the user releases the button, the LED will TURN OFF.
164 -
165 -
166 166  = 2.  Access and Configure LG308N =
167 167  
168 168  
... ... @@ -169,17 +169,17 @@
169 169  The LG308N is configured as a WiFi Access Point by default. User can access and configure the LG308N after connecting to its WiFi network, or via its Ethernet port.
170 170  
171 171  
166 +
172 172  == 2.1  Find IP address of LG308N ==
173 173  
169 +
174 174  === 2.1.1  Connect via WiFi ===
175 175  
176 -
177 177  [[image:1657011715859-829.png]]
178 178  
179 179  
180 180  At the first boot of LG308N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
181 181  
182 -
183 183  (% style="color:red" %)**Note: In latest version firmware, it has been password protected and the password is:  **(% style="background-color:yellow" %)**dragino+dragino**
184 184  
185 185  
... ... @@ -189,6 +189,7 @@
189 189  (((
190 190  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LG308N has the default IP (% style="color:green" %)**10.130.1.1**
191 191  
186 +
192 192  
193 193  )))
194 194  
... ... @@ -197,10 +197,12 @@
197 197  
198 198  [[image:1657011966663-484.png]]
199 199  
200 -
201 201  (((
202 202  Alternatively, connect the LG308N** __WAN port__** to your router and LG308N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG308N. You can also use this IP to connect.
197 +)))
203 203  
199 +
200 +(((
204 204  
205 205  )))
206 206  
... ... @@ -209,12 +209,12 @@
209 209  
210 210  [[image:1657012061799-674.png]]
211 211  
212 -
213 213  (((
214 214  The LG308N __**LAN port**__ is configured as DHCP router by default, user can connect the PC to LAN port and set PC to DHCP mode, it will get IP from LAN port and be able to access to the device. The default IP in LAN port is 10.130.1.1
215 215  )))
216 216  
217 217  
214 +
218 218  === 2.1.4  Connect WiFi with DHCP IP from router ===
219 219  
220 220  
... ... @@ -224,6 +224,7 @@
224 224  If the LG308N already connect to the router via WiFi, use can use the WiFi IP to connect to LG308N.
225 225  
226 226  
224 +
227 227  === 2.1.5  Connect via LAN port by fall back ip ===
228 228  
229 229  
... ... @@ -230,6 +230,7 @@
230 230  The **LAN port** also has a [[fall back ip address>>path:#fallback_ip]] for access if user doesn't connect to uplink router.
231 231  
232 232  
231 +
233 233  == 2.2  Access Configure Web UI ==
234 234  
235 235  
... ... @@ -241,7 +241,7 @@
241 241  
242 242  or
243 243  
244 -http:~/~/IP_ADDRESS or http:~/~/ IP_ADDRESS:8000
243 +http:~/~/IP_ADDRESS or [[http:~~/~~/ IP_ADDRESS:8000>>url:http://192.168.1.xx:8000]]
245 245  
246 246  
247 247  You will see the login interface of DLOS8N as shown below.
... ... @@ -252,12 +252,13 @@
252 252  
253 253  (% style="color:#4f81bd" %)**Password:   dragino**
254 254  
255 -
256 256  [[image:1652414287022-223.png]]
257 257  
258 258  
257 +
259 259  = 3.  Typical Network Setup =
260 260  
260 +
261 261  == 3.1  Overview ==
262 262  
263 263  
... ... @@ -270,17 +270,15 @@
270 270  * **WiFi AP Mode**
271 271  * **Cellular Mode**
272 272  
273 -
274 -
275 275  == 3.2  Use WAN port to access Internet ==
276 276  
277 277  
278 278  By default, the LG308N is set to use the WAN port to connect to an upstream network. When you connect the LG308N's WAN port to an upstream router, LG308N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
279 279  
280 -
281 281  [[image:1657012559318-672.png]]
282 282  
283 283  
281 +
284 284  == 3.3  Access the Internet as a WiFi Client ==
285 285  
286 286  
... ... @@ -290,11 +290,12 @@
290 290  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
291 291  )))
292 292  
293 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916142159-25.png?rev=1.1||alt="image-20220916142159-25.png" height="398" width="859"]]
291 +[[image:1657012573321-862.png]]
294 294  
295 295  (((
296 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
294 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply** to connect.
297 297  
296 +
298 298  
299 299  )))
300 300  
... ... @@ -311,6 +311,7 @@
311 311  [[image:image-20220705171836-8.png]]
312 312  
313 313  
313 +
314 314  (((
315 315  The set up page is (% style="color:#4f81bd" %)**System ~-~-> Cellular**
316 316  )))
... ... @@ -322,10 +322,11 @@
322 322  )))
323 323  
324 324  (((
325 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916141840-23.png?rev=1.1||alt="image-20220916141840-23.png" height="356" width="868"]]
325 +[[image:image-20220705171919-9.png]]
326 326  )))
327 327  
328 328  
329 +
329 329  == 3.5  Check Internet connection ==
330 330  
331 331  
... ... @@ -338,35 +338,30 @@
338 338  [[image:1657012821329-972.png]]
339 339  
340 340  
342 +
341 341  = 4.  Example: Configure as a LoRaWAN gateway =
342 342  
343 343  
344 344  LG308N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
345 345  
346 -
347 347  (((
348 348  [[image:1657012860422-990.png]]
349 -
350 -
351 351  )))
352 352  
353 353  This chapter describes how to use the LG308N to work with(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
354 354  
355 355  
355 +
356 356  == 4.1  Create a gateway in TTN V3 Server ==
357 357  
358 358  
359 359  (((
360 360  (% style="color:blue" %)**Step 1: Get a Unique gateway ID.**
361 -
362 -
363 363  )))
364 364  
365 365  (((
366 366  (((
367 367  Every LG308N has a unique gateway id. The ID can be found at LoRaWAN page:
368 -
369 -
370 370  )))
371 371  )))
372 372  
... ... @@ -382,10 +382,8 @@
382 382  
383 383  (% style="color:blue" %)**Step 2: Sign up a user account in TTN server**
384 384  
385 -
386 386  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
387 387  
388 -
389 389  [[image:1652422127479-258.png||height="346" width="738"]]
390 390  
391 391  
... ... @@ -392,11 +392,8 @@
392 392  
393 393  (% style="color:blue" %)**Step 3: Choose the TTNv3 Cluster Picker**
394 394  
395 -
396 396  (((
397 397  [[image:1652422142236-792.png||height="356" width="737"]]
398 -
399 -
400 400  )))
401 401  
402 402  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
... ... @@ -409,12 +409,10 @@
409 409  
410 410  (% style="color:blue" %)**Step 4: Create a Gateway**
411 411  
412 -
413 413  [[image:1652422440891-514.png||height="360" width="747"]]
414 414  
415 415  Click the Gateway icon and then click Add gateway.
416 416  
417 -
418 418  Open the following page:
419 419  
420 420   [[image:1652422470352-518.png||height="391" width="716"]]
... ... @@ -431,10 +431,10 @@
431 431  
432 432  After creating the gateway, you can see the gateway info, as below.
433 433  
434 -
435 435  [[image:1652422509034-682.png||height="299" width="739"]]
436 436  
437 437  
426 +
438 438  == 4.2  Configure LG308N to connect to TTN v3 ==
439 439  
440 440  
... ... @@ -447,7 +447,7 @@
447 447  )))
448 448  
449 449  (((
450 -Choose the right server provider and click (% style="color:blue" %)**Save&Apply.**
439 +Choose the right server provider and click (% style="color:blue" %)**Save&Apply**
451 451  
452 452  
453 453  )))
... ... @@ -460,17 +460,15 @@
460 460  
461 461  In the home page, we can see the LoRaWAN connection is ready now.
462 462  
452 +[[image:1657014479765-850.png]]
463 463  
464 -[[image:image-20220916171413-2.png]]
465 465  
466 -
467 -
468 468  In TTN v3 portal, we can also see the gateway is connected.
469 469  
470 -
471 471  [[image:1652422703020-955.png||height="343" width="730"]]
472 472  
473 473  
460 +
474 474  == 4.3  Configure frequency ==
475 475  
476 476  
... ... @@ -485,6 +485,7 @@
485 485   [[image:1652422763536-750.png||height="514" width="730"]]
486 486  
487 487  
475 +
488 488  == 4.4  Add a LoRaWAN End Device ==
489 489  
490 490  
... ... @@ -514,15 +514,13 @@
514 514  
515 515  
516 516  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
517 -
518 -
519 519  )))
520 520  
521 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20230426083319-1.png?width=556&height=258&rev=1.1||alt="image-20230426083319-1.png"]]
507 +[[image:1652422840936-838.png]]
522 522  
523 523  
524 524  (((
525 -(% style="color:red" %)**Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.**
511 +(% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
526 526  
527 527  
528 528  )))
... ... @@ -588,19 +588,22 @@
588 588  [[image:1652423277549-324.png||height="273" width="745"]]
589 589  
590 590  
577 +
591 591  = 5.  Web Configure Pages =
592 592  
580 +
593 593  == 5.1  Home ==
594 594  
595 595  
596 596  Shows the system running status.
597 597  
598 -
599 599  [[image:1657014949846-507.png]]
600 600  
601 601  
589 +
602 602  == 5.2  LoRa Settings ==
603 603  
592 +
604 604  === 5.2.1  LoRa ~-~-> LoRa ===
605 605  
606 606  
... ... @@ -617,16 +617,14 @@
617 617  
618 618  (((
619 619  After user choose the frequency plan, he can see the actually frequency in used by checking the page (% style="color:blue" %)**LogRead ~-~-> LoRa Log**
620 -
621 -
622 622  )))
623 623  
624 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LG308N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652422737399-529.png?rev=1.1||alt="1652422737399-529.png"]]
611 +[[image:1652423554776-574.png||height="380" width="740"]]
625 625  
626 -
627 627  (% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
628 628  
629 629  
616 +
630 630  === 5.2.2  LoRa ~-~-> ABP Decryption ===
631 631  
632 632  
... ... @@ -639,24 +639,23 @@
639 639  
640 640  
641 641  Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
642 -
643 -
644 644  )))
645 645  
646 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916114346-7.png?rev=1.1||alt="image-20220916114346-7.png" height="359" width="876"]]
631 +[[image:1652423628833-467.png||height="357" width="755"]]
647 647  
648 648  
634 +
649 649  == 5.3  LoRaWAN Settings ==
650 650  
637 +
651 651  === 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
652 652  
653 653  
654 -This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc.
641 +This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc
655 655  
643 +[[image:1652423628833-467.png||height="357" width="755"]]
656 656  
657 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916114929-8.png?rev=1.1||alt="image-20220916114929-8.png" height="707" width="860"]]
658 658  
659 -
660 660  (% style="color:red" %)**Note:**
661 661  
662 662  ~*: User can ignore the latitude and longitude settings here, LG308N will use the actually value from GPS module.
... ... @@ -666,27 +666,17 @@
666 666  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
667 667  
668 668  
669 -=== 5.3.2  LoRaWAN ~-~-> LoRaWAN ~-~- Basic Station ===
670 670  
656 +=== 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
671 671  
672 -[[image:image-20230406173729-1.png]]
673 673  
659 +[[image:1652428499323-384.png||height="275" width="723"]]
674 674  
675 -The basic station mode support **TTN/AWS/Chirpstack/ThingPark/Senet** Platform.
676 676  
677 -Instruction:
662 +(((
663 +Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
678 678  
679 - [[The Thing Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20TTN/#H3.A0GatewayRegistrationforBasicsStation]]      
680 680  
681 - [[AWS-IoT LoRaWAN Core>>url:http://wiki.dragino.com/xwiki/bin/view/Main/AWS%20IoT%20Core%20for%20LoRaWAN/]]
682 -
683 - [[Chirpstack>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H3.A0GatewayRegistrationforBasicsStation]]
684 -
685 - ThingPark
686 -
687 - [[Senet>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Connection%20to%20Senet/#H3.A0SemtechBasicStation]]
688 -
689 -(((
690 690  
691 691  )))
692 692  
... ... @@ -699,13 +699,12 @@
699 699  
700 700  (((
701 701  Instruction: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
702 -
703 -
704 704  )))
705 705  
706 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916115143-9.png?rev=1.1||alt="image-20220916115143-9.png" height="316" width="864"]](% style="display:none" %)
680 +[[image:1652428648903-878.png||height="266" width="731"]]
707 707  
708 708  
683 +
709 709  == 5.4  MQTT Settings ==
710 710  
711 711  
... ... @@ -721,29 +721,30 @@
721 721  [[image:1652428705046-212.png||height="417" width="733"]]
722 722  
723 723  
699 +
724 724  == 5.5  System ==
725 725  
702 +
726 726  === 5.5.1  System ~-~-> System Overview ===
727 727  
728 728  
729 729  Shows the system info:
730 730  
708 +[[image:1652428773760-580.png||height="408" width="728"]]
731 731  
732 -[[image:image-20220916173046-3.png||height="613" width="868"]]
733 733  
734 734  
735 735  === 5.5.2  System ~-~-> General ( login settings) ===
736 736  
737 737  
738 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916134411-11.png?rev=1.1||alt="image-20220916134411-11.png" height="499" width="865"]](% style="display:none" %)
715 +[[image:1652428861256-300.png||height="354" width="724"]]
739 739  
740 -
741 741  (((
742 742  (% style="color:#037691" %)**__System Password:__**
743 743  )))
744 744  
745 745  (((
746 -There are two login for DLOS8: (% style="color:#4f81bd" %)**root /dragino** (% style="color:black" %)or (% style="color:#4f81bd" %)**admin /dragino**. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
722 +There are two login for DLOS8: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
747 747  )))
748 748  
749 749  (((
... ... @@ -757,6 +757,7 @@
757 757  (((
758 758  (% style="color:#037691" %)**__Port forwarding: __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
759 759  
736 +
760 760  
761 761  )))
762 762  
... ... @@ -763,7 +763,7 @@
763 763  === 5.5.3  System ~-~-> Network ===
764 764  
765 765  
766 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916134642-12.png?rev=1.1||alt="image-20220916134642-12.png" height="411" width="873"]]
743 +[[image:1652429149053-824.png||height="467" width="725"]]
767 767  
768 768  
769 769  (((
... ... @@ -779,32 +779,34 @@
779 779  )))
780 780  
781 781  
759 +
782 782  === 5.5.4  System ~-~-> WiFi ===
783 783  
784 784  
785 785  LG308N WiFi Settings.
786 786  
787 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916134831-13.png?rev=1.1||alt="image-20220916134831-13.png" height="408" width="870"]]
765 +[[image:1652429430767-921.png||height="367" width="723"]]
788 788  
789 789  
768 +
790 790  === 5.5.5  System ~-~-> Cellular ===
791 791  
792 792  
793 793  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
794 794  
774 +[[image:1652429309615-825.png||height="320" width="732"]]
795 795  
796 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916135100-14.png?rev=1.1||alt="image-20220916135100-14.png" height="347" width="874"]](% style="display:none" %)
797 -
798 -
799 799  (% style="color:red" %)**Note *: For LG308N which doesn't have the cellular module, this page will shows Cellular not detected.**
800 800  
801 801  
779 +
802 802  === 5.5.6  System ~-~-> Network Status ===
803 803  
804 804  
805 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916135207-15.png?rev=1.1||alt="image-20220916135207-15.png" height="599" width="882"]]
783 +[[image:1652429486609-208.png||height="415" width="728"]]
806 806  
807 807  
786 +
808 808  === 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
809 809  
810 810  
... ... @@ -816,21 +816,19 @@
816 816  
817 817  [[image:1652429537849-154.png||height="339" width="722"]]
818 818  
819 -
820 820  Please see this document for detail:
821 821  
822 822  [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
823 823  
824 824  
825 -R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Monitor & Remote Access Gateway.WebHome]]**
803 +R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Remote Access Gateway.WebHome]]**
826 826  
827 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140017-16.png?rev=1.1||alt="image-20220916140017-16.png" height="593" width="872"]]
805 +[[image:1652429624400-864.png||height="432" width="716"]]
828 828  
829 -(% style="display:none" %) (%%)
830 830  
808 +
831 831  === 5.5.8  System ~-~-> Firmware Upgrade ===
832 832  
833 -
834 834  We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
835 835  
836 836  * **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
... ... @@ -844,39 +844,30 @@
844 844  
845 845  
846 846  (((
847 -The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(%%)is the upgrade Image. There are different methods to upgrade, as below.
824 +The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
848 848  )))
849 849  
850 850  (((
851 851  (% style="color:green" %)**Web~-~-> System~-~-> Firmware Upgrade**
852 -
853 -
854 854  )))
855 855  
856 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140103-17.png?rev=1.1||alt="image-20220916140103-17.png" height="274" width="871"]]
831 +[[image:1652429711145-862.png||height="270" width="737"]]
857 857  
858 858  
859 859  (((
860 -Select the required image and click (% style="color:blue" %)**Flash Image.**(%%) The image will be uploaded to the device, and then click (% style="color:blue" %)**Process Update** (%%)to upgrade.
861 -
862 -
835 +Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
863 863  )))
864 864  
865 865  (((
866 -(% style="color:red" %)**NOTE**: (%%)You normally need to (% style="color:blue" %)**//uncheck//**(%%) the (% style="color:blue" %)**Preserve Settings**(%%) checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
867 -
868 -
839 +(% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
869 869  )))
870 870  
871 871  (((
872 872  The system will automatically boot into the new firmware after upgrade.
873 -
874 -
875 875  )))
876 876  
877 877  [[image:1652429962190-224.png||height="358" width="729"]]
878 878  
879 -
880 880  (% style="color:red" %)**NOTE***(%%): User can also upgrade firmware via Linux console
881 881  
882 882  SCP the firmware to the system(% style="color:green" %)**/var**(%%)** **directory and then run
... ... @@ -887,161 +887,68 @@
887 887  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
888 888  
889 889  
858 +
890 890  === 5.5.9  System ~-~-> Reboot/Reset ===
891 891  
861 +[[image:1652430197132-330.png||height="256" width="724"]]
892 892  
893 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140312-18.png?rev=1.1||alt="image-20220916140312-18.png" height="274" width="873"]]
894 -
895 895  (((
896 896  
865 +
866 +
897 897  )))
898 898  
899 899  === 5.5.10  System ~-~-> Package Maintain ===
900 900  
871 +[[image:1652430243826-126.png||height="289" width="723"]]
901 901  
902 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140421-19.png?rev=1.1||alt="image-20220916140421-19.png" height="687" width="868"]]
903 -
904 -
905 905  Place to show what package has installed and possible to upgrade packages.
906 906  
907 907  
876 +
908 908  == 5.6  LogRead ==
909 909  
910 910  === 5.6.1  LogRead ~-~-> LoRa Log ===
911 911  
912 -
913 913  Show the frequency for LoRa Radio and traffics.
914 914  
883 +[[image:1657069890320-513.png]]
915 915  
916 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140549-20.png?rev=1.1||alt="image-20220916140549-20.png" height="734" width="883"]]
917 917  
918 918  
887 +
919 919  === 5.6.2  LogRead ~-~-> System Log ===
920 920  
921 -
922 922  Show the system log
923 923  
892 +[[image:1657069922599-794.png]]
924 924  
925 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140732-21.png?rev=1.1||alt="image-20220916140732-21.png" height="706" width="867"]]
926 926  
927 927  
928 928  = 6.  More features =
929 929  
930 -== 6.1 Packet Filtering ==
898 +== 6.1  More instructions ==
931 931  
932 -
933 -Drop unwanted packets.
934 -
935 -See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]
936 -
937 -
938 -== 6.2 Remote Access ==
939 -
940 -
941 -Remote Access Devices for management.
942 -
943 -Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access]]
944 -
945 -
946 -== 6.3 How to decode ABP LoRaWAN node ==
947 -
948 -
949 -Decode ABP:
950 -
951 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20~~-~~--%20LG308/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20---%20LG308/]]
952 -
953 -
954 -== 6.4 How to set data to MQTT broker ==
955 -
956 -
957 -Only support ABP LoRaWAN End Node
958 -
959 -Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]
960 -
961 -
962 -== 6.5 How the gateway connects to Chirpstack v3/v4 via gateway-bridge ==
963 -
964 -
965 -**For Chirpstack v3 Gateway-bridge**:
966 -
967 -The corresponding gateway firmware must be used :
968 -
969 -[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge~~-~~-build-v5.4.1679487778-20230322-2024/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge--build-v5.4.1679487778-20230322-2024/]]
970 -
971 -Chirpstack v3 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge]]
972 -
973 -
974 -**For Chirpstack v4 Gateway-bridge**:
975 -
976 -The corresponding gateway firmware must be used :
977 -
978 -[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V4~~-~~-build-v5.4.1670655072-20221210-1452/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V4--build-v5.4.1670655072-20221210-1452/]]
979 -
980 -Chirpstack v4 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge]]
981 -
982 -
983 -(% style="color:red" %)**NOTE***(%%): Different chirpstack versions use different gateway-bridge configurations.
984 -
985 -After updating the Chirpstack gateway-bridge firmware, there is no need to re-download and install the Chirpstack gateway-bridge package
986 -
987 -
988 -== 6.6  How to extend the gateway size of memory with USB device (SD/TF card, USB flash drive). ==
989 -
990 -
991 -USB card reader plugged into the USB port of the gateway
992 -
993 -Access the gateway Linux Command Line
994 -
995 -
996 -Check the USB device
997 -
998 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425165308-2.png?rev=1.1||alt="image-20230425165308-2.png"]]
999 -
1000 -
1001 -**Mount the USB device**
1002 -
1003 -(% class="box infomessage" %)
1004 -(((
1005 -**mount /dev/sda1 /mnt/**
1006 -)))
1007 -
1008 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425174131-4.png?rev=1.1||alt="image-20230425174131-4.png"]]
1009 -
1010 -
1011 -**Set up the automatic mount on boot**
1012 -
1013 -(% class="box infomessage" %)
1014 -(((
1015 -**sed -i '3cmount \/dev\/sda1 \/mnt\/' /etc/rc.local **
1016 -)))
1017 -
1018 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425173831-3.png?width=833&height=105&rev=1.1||alt="image-20230425173831-3.png"]]
1019 -
1020 -
1021 -== 6.7  More instructions ==
1022 -
1023 -
1024 1024  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
1025 1025  
1026 1026  
903 +
1027 1027  = 7.  Linux System =
1028 1028  
1029 -
1030 1030  The LG308N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
1031 1031  
1032 1032  
1033 1033  == 7.1  SSH Access for Linux console ==
1034 1034  
1035 -
1036 1036  User can access the Linux console via the SSH protocol. Make sure your PC and the LG308N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
1037 1037  
1038 -**IP address:  (% style="color:blue" %)IP address of LG308N(%%)**
913 +IP address:  IP address of LG308N
1039 1039  
1040 -**Port:  (% style="color:blue" %)22 (via WiFi AP mode) or 2222 (via WAN Interface)(%%)**
915 +Port:         22 (via WiFi AP mode) or 2222 (via WAN Interface)
1041 1041  
1042 -**User Name:      (% style="color:blue" %)root(%%)**
917 +User Name:      (% style="color:green" %)**root**
1043 1043  
1044 -**Password:         (% style="color:blue" %)dragino(default)(%%)**
919 +Password:         (% style="color:green" %)**dragino** (% style="color:black" %)(default)
1045 1045  
1046 1046  
1047 1047  After logging in, you will be in the Linux console and can enter commands as shown below.
... ... @@ -1049,15 +1049,14 @@
1049 1049  [[image:1652431588565-830.png]]
1050 1050  
1051 1051  
1052 -The “** (% style="color:blue" %)logread -f"(%%)**command can be used to debug how system runs.
927 +The “(% class="mark" %)**logread -f**(%%)” command can be used to debug how system runs.
1053 1053  
1054 -
1055 1055  [[image:1657070133275-283.png]]
1056 1056  
1057 1057  
932 +
1058 1058  == 7.2  Edit and Transfer files ==
1059 1059  
1060 -
1061 1061  (((
1062 1062  The LG308N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
1063 1063  )))
... ... @@ -1072,8 +1072,6 @@
1072 1072  
1073 1073  (((
1074 1074  Screenshot is as below:
1075 -
1076 -
1077 1077  )))
1078 1078  
1079 1079  [[image:1652431650755-450.png]]
... ... @@ -1081,7 +1081,6 @@
1081 1081  
1082 1082  == 7.3  File System ==
1083 1083  
1084 -
1085 1085  (((
1086 1086  (((
1087 1087  The LG308N has a 16MB flash and a 64MB RAM. The /var and /tmp directory are in the RAM, contents stored in /tmp and /var will be erased after reboot the device. Other directories are in the flash and will keep after reboot.
... ... @@ -1094,11 +1094,11 @@
1094 1094  )))
1095 1095  
1096 1096  
968 +
1097 1097  == 7.4  Package maintenance system ==
1098 1098  
971 +LG308N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
1099 1099  
1100 -LG308N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure LG308N to use **//iperf //**.
1101 -
1102 1102  (((
1103 1103  Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
1104 1104  )))
... ... @@ -1149,6 +1149,7 @@
1149 1149  (((
1150 1150  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
1151 1151  
1023 +
1152 1152  
1153 1153  )))
1154 1154  
... ... @@ -1156,17 +1156,10 @@
1156 1156  
1157 1157  
1158 1158  
1159 -= 9.  OTA System Update =
1031 += 9.  FAQ =
1160 1160  
1033 +== 9.1  How can I configure for a customized frequency band? ==
1161 1161  
1162 -LG308N supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
1163 -
1164 -
1165 -= 10.  FAQ =
1166 -
1167 -== 10.1  How can I configure for a customized frequency band? ==
1168 -
1169 -
1170 1170  (((
1171 1171  See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
1172 1172  )))
... ... @@ -1175,15 +1175,13 @@
1175 1175  
1176 1176  )))
1177 1177  
1178 -== 10.2  Can I connect LG308N to LORIOT? ==
1043 +== 9.2  Can I connect LG308N to LORIOT? ==
1179 1179  
1180 -
1181 1181  Yes, the set up instruction is here: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
1182 1182  
1183 1183  
1184 -== 10.3  Can I make my own firmware for the gateway, where can I find the source code? ==
1048 +== 9.3  Can I make my own firmware for the gateway, where can I find the source code? ==
1185 1185  
1186 -
1187 1187  (((
1188 1188  Yes, You can make your own firmware for the LG308N for branding purposes or to add customized applications.
1189 1189  )))
... ... @@ -1193,15 +1193,13 @@
1193 1193  )))
1194 1194  
1195 1195  
1196 -== 10.4  Can I use 868Mhz version for 915Mhz bands? ==
1059 +== 9.4  Can I use 868Mhz version for 915Mhz bands? ==
1197 1197  
1198 -
1199 1199  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
1200 1200  
1201 1201  
1202 -== 10.5  Can I control the LEDs? ==
1064 +== 9.5  Can I control the LEDs? ==
1203 1203  
1204 -
1205 1205  Except the PWR LED is controlled by +3v3 power directly. All other LEDs can be controlled by developer.
1206 1206  
1207 1207  
... ... @@ -1225,10 +1225,10 @@
1225 1225  OFF: echo 1 > /sys/class/gpio/gpio27/value
1226 1226  
1227 1227  
1228 -= 11.  Trouble Shooting =
1229 1229  
1230 -== 11.1  I get kernel error when install new package, how to fix? ==
1090 += 10.  Trouble Shooting =
1231 1231  
1092 +== 10.1  I get kernel error when install new package, how to fix? ==
1232 1232  
1233 1233  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
1234 1234  
... ... @@ -1251,8 +1251,8 @@
1251 1251  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
1252 1252  
1253 1253  
1254 -== 11.2  How to recover the LG308N if the firmware crashes ==
1255 1255  
1116 +== 10.2  How to recover the LG308N if the firmware crashes ==
1256 1256  
1257 1257  (((
1258 1258  Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
... ... @@ -1262,12 +1262,10 @@
1262 1262  
1263 1263  )))
1264 1264  
1265 -== 11.3  I configured LG308N for WiFi access and lost its IP. What to do now? ==
1126 +== 10.3  I configured LG308N for WiFi access and lost its IP. What to do now? ==
1266 1266  
1267 -
1268 1268  [[image:1657074078183-336.png]]
1269 1269  
1270 -
1271 1271  (((
1272 1272  (((
1273 1273  The LG308N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access LG308N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
... ... @@ -1274,14 +1274,13 @@
1274 1274  )))
1275 1275  )))
1276 1276  
1277 -
1278 1278  (((
1279 -(% style="color:red" %)**Note: fallback IP can be disabled in the WAN and DHCP page.**
1137 +(% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
1280 1280  )))
1281 1281  
1282 1282  
1283 1283  (((
1284 -**Steps to connect via fall back IP:**
1142 +Steps to connect via fall back IP:
1285 1285  )))
1286 1286  
1287 1287  (((
... ... @@ -1290,45 +1290,41 @@
1290 1290  
1291 1291  (((
1292 1292  2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
1293 -
1294 -
1295 1295  )))
1296 1296  
1297 1297  (((
1298 1298  As below photo:
1299 -
1300 -
1301 1301  )))
1302 1302  
1303 1303  [[image:1652435256286-879.png]]
1304 1304  
1305 -
1306 1306  3. In PC, use 172.31.255.254 to access LG308N via Web or Console.
1307 1307  
1308 1308  
1309 -= 12.  Order Info =
1310 1310  
1163 += 11.  Order Info =
1311 1311  
1312 -**PART:(% style="color:blue" %) DLOS8N-XXX-YYY: (%%)**(% style="color:blue" %)
1313 1313  
1314 -(% style="color:blue" %)**XXX:**(%%)** Frequency Band**
1166 +(% style="color:#4f81bd" %)**//PART: DLOS8N-XXX-YYY//: **
1315 1315  
1316 -* (% style="color:red" %)** 868**(%%) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1317 -* (% style="color:red" %)** 915**(%%):  valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1168 +(% style="color:#4f81bd" %)**//XXX: Frequency Band//**
1318 1318  
1170 +* (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1171 +* (% style="color:red" %)** 915**(% style="color:black" %):  valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1172 +
1319 1319  (% style="color:#4f81bd" %)
1320 1320  
1321 -(% style="color:blue" %)**YYY:**(%%)** 4G Cellular Option**
1175 +(% style="color:#4f81bd" %)**//YYY: 4G Cellular Option//**
1322 1322  
1323 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
1324 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America: Verizon, AT&T(FirstNet), U.S.Cellular; Canada: Telus
1325 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1326 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1177 +* (% style="color:red" %)** EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1178 +* (% style="color:red" %)** EC25-A**(% style="color:black" %):  North America/ Rogers/AT&T/T-Mobile.
1179 +* (% style="color:red" %)** EC25-AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1180 +* (% style="color:red" %)** EC25-J**(% style="color:black" %):  Japan, DOCOMO/SoftBank/ KDDI
1327 1327  
1328 1328  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1329 1329  
1330 1330  
1331 -= 13.  Packing Info =
1185 += 12.  Packing Info =
1332 1332  
1333 1333  (((
1334 1334  
... ... @@ -1352,23 +1352,15 @@
1352 1352  * Package Size: 49 x 19.5 x x 19Package Size: 4912 cm
1353 1353  * Weight: 2.5kg
1354 1354  
1209 += 13.  Support =
1355 1355  
1356 -
1357 -= 14.  Support =
1358 -
1359 -
1360 1360  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1361 -
1362 1362  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
1363 1363  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
1214 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1364 1364  
1365 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to: [[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1216 += 14.  Reference =
1366 1366  
1367 -
1368 -
1369 -= 15.  Reference =
1370 -
1371 -
1372 1372  * Source code for LG08 LoRa Gateway: [[https:~~/~~/github.com/dragino/openwrt_lede-18.06>>url:https://github.com/dragino/openwrt_lede-18.06]]
1373 1373  
1374 1374  * OpenWrt official Wiki: [[http:~~/~~/www.openwrt.org/>>url:http://www.openwrt.org/]]
1663317843420-717.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -86.8 KB
Content
image-20220916164504-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -42.4 KB
Content
image-20220916171413-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -143.3 KB
Content
image-20220916173046-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -142.9 KB
Content
image-20221101103113-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230406173729-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -85.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0