Last modified by Kilight Cao on 2025/02/07 08:57
<
From version < 142.3 >
edited by Xiaoling
on 2023/05/29 09:27
To version < 127.2 >
edited by Xiaoling
on 2022/07/29 14:37
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -21,6 +21,7 @@
21 21  
22 22  = 1.  Introduction =
23 23  
24 +
24 24  == 1.1  What is the LG308N ==
25 25  
26 26  
... ... @@ -49,6 +49,7 @@
49 49  [[image:1657010949218-224.png]]
50 50  
51 51  
53 +
52 52  == 1.2  Specifications ==
53 53  
54 54  
... ... @@ -62,6 +62,8 @@
62 62  * 64MB RAM
63 63  * 16MB Flash
64 64  
67 +
68 +
65 65  (% style="color:#037691" %)**Interface:**
66 66  
67 67  * 10M/100M RJ45 Ports x 2
... ... @@ -73,6 +73,8 @@
73 73  * Mini-PCI E connector x 1
74 74  * SX1302 + 2 x SX1250
75 75  
80 +
81 +
76 76  (% style="color:#037691" %)**WiFi Spec:**
77 77  
78 78  * IEEE 802.11 b/g/n
... ... @@ -86,6 +86,8 @@
86 86  ** 11g 54M : -71dbm
87 87  ** 11n 20M : -67dbm
88 88  
95 +
96 +
89 89  (% style="color:#037691" %)**LoRa Spec:**
90 90  
91 91  * Up to -142.5 dBm sensitivity with SX1250 Tx/Rx front-end
... ... @@ -97,6 +97,8 @@
97 97  * Dynamic data-rate (DDR) adaptation
98 98  * True antenna diversity or simultaneous dual-band operation
99 99  
108 +
109 +
100 100  (% style="color:#037691" %)**Cellular 4G LTE (optional):**
101 101  
102 102  * Quectel: [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
... ... @@ -106,6 +106,8 @@
106 106  * Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
107 107  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
108 108  
119 +
120 +
109 109  == 1.3  Features ==
110 110  
111 111  
... ... @@ -115,12 +115,15 @@
115 115  * LoRaWAN Gateway
116 116  * 10 programmable parallel demodulation paths
117 117  
130 +
131 +
118 118  == 1.4  Hardware System Structure ==
119 119  
120 120  
121 -[[image:image-20221101103113-1.png]]
135 +[[image:1657011152828-178.png]]
122 122  
123 123  
138 +
124 124  == 1.5  LG308N Applications ==
125 125  
126 126  
... ... @@ -127,6 +127,7 @@
127 127  [[image:1657011208596-209.png]]
128 128  
129 129  
145 +
130 130  == 1.6  LED Indicators ==
131 131  
132 132  
... ... @@ -147,22 +147,12 @@
147 147  )))
148 148  
149 149  
150 -== 1.7 Button Instruction ==
166 +(((
167 +(((
168 +
169 +)))
170 +)))
151 151  
152 -
153 -LG308N has a black toggle button, which is:
154 -
155 -
156 -(% style="color:blue" %)**//➢ //Long press 4-5s:                     **(%%)the gateway will reload the Network and Initialize wifi configuration
157 -
158 - **LED status: ** SYS LED will BLINKING RED Until the reload is finished.
159 -
160 -
161 -(% style="color:blue" %)**➢ Long press more than 30s:    **(%%)the gateway will restart and restore factory settings.
162 -
163 - **LED status: ** When the user releases the button, the LED will TURN OFF.
164 -
165 -
166 166  = 2.  Access and Configure LG308N =
167 167  
168 168  
... ... @@ -169,17 +169,17 @@
169 169  The LG308N is configured as a WiFi Access Point by default. User can access and configure the LG308N after connecting to its WiFi network, or via its Ethernet port.
170 170  
171 171  
178 +
172 172  == 2.1  Find IP address of LG308N ==
173 173  
181 +
174 174  === 2.1.1  Connect via WiFi ===
175 175  
176 -
177 177  [[image:1657011715859-829.png]]
178 178  
179 179  
180 180  At the first boot of LG308N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
181 181  
182 -
183 183  (% style="color:red" %)**Note: In latest version firmware, it has been password protected and the password is:  **(% style="background-color:yellow" %)**dragino+dragino**
184 184  
185 185  
... ... @@ -189,6 +189,7 @@
189 189  (((
190 190  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LG308N has the default IP (% style="color:green" %)**10.130.1.1**
191 191  
198 +
192 192  
193 193  )))
194 194  
... ... @@ -197,10 +197,12 @@
197 197  
198 198  [[image:1657011966663-484.png]]
199 199  
200 -
201 201  (((
202 202  Alternatively, connect the LG308N** __WAN port__** to your router and LG308N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG308N. You can also use this IP to connect.
209 +)))
203 203  
211 +
212 +(((
204 204  
205 205  )))
206 206  
... ... @@ -209,15 +209,14 @@
209 209  
210 210  [[image:1657012061799-674.png]]
211 211  
212 -
213 213  (((
214 214  The LG308N __**LAN port**__ is configured as DHCP router by default, user can connect the PC to LAN port and set PC to DHCP mode, it will get IP from LAN port and be able to access to the device. The default IP in LAN port is 10.130.1.1
215 215  )))
216 216  
217 217  
226 +
218 218  === 2.1.4  Connect WiFi with DHCP IP from router ===
219 219  
220 -
221 221  [[image:image-20220705171041-7.png]]
222 222  
223 223  
... ... @@ -224,15 +224,15 @@
224 224  If the LG308N already connect to the router via WiFi, use can use the WiFi IP to connect to LG308N.
225 225  
226 226  
235 +
227 227  === 2.1.5  Connect via LAN port by fall back ip ===
228 228  
229 -
230 230  The **LAN port** also has a [[fall back ip address>>path:#fallback_ip]] for access if user doesn't connect to uplink router.
231 231  
232 232  
241 +
233 233  == 2.2  Access Configure Web UI ==
234 234  
235 -
236 236  **Web Interface**
237 237  
238 238  Open a browser on the PC and type the LG308N ip address (depends on your connect method)
... ... @@ -241,7 +241,7 @@
241 241  
242 242  or
243 243  
244 -http:~/~/IP_ADDRESS or http:~/~/ IP_ADDRESS:8000
252 +http:~/~/IP_ADDRESS or [[http:~~/~~/ IP_ADDRESS:8000>>url:http://192.168.1.xx:8000]]
245 245  
246 246  
247 247  You will see the login interface of DLOS8N as shown below.
... ... @@ -252,7 +252,6 @@
252 252  
253 253  (% style="color:#4f81bd" %)**Password:   dragino**
254 254  
255 -
256 256  [[image:1652414287022-223.png]]
257 257  
258 258  
... ... @@ -260,7 +260,6 @@
260 260  
261 261  == 3.1  Overview ==
262 262  
263 -
264 264  (((
265 265  LG308N supports flexible network set up for different environment. This section describes the typical network topology can be set in LG308N. The typical network set up includes:
266 266  )))
... ... @@ -272,16 +272,13 @@
272 272  
273 273  == 3.2  Use WAN port to access Internet ==
274 274  
275 -
276 276  By default, the LG308N is set to use the WAN port to connect to an upstream network. When you connect the LG308N's WAN port to an upstream router, LG308N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
277 277  
278 -
279 279  [[image:1657012559318-672.png]]
280 280  
281 281  
282 282  == 3.3  Access the Internet as a WiFi Client ==
283 283  
284 -
285 285  In the WiFi Client Mode, LG308N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
286 286  
287 287  (((
... ... @@ -288,10 +288,10 @@
288 288  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
289 289  )))
290 290  
291 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916142159-25.png?rev=1.1||alt="image-20220916142159-25.png" height="398" width="859"]]
294 +[[image:1657012573321-862.png]]
292 292  
293 293  (((
294 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
297 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
295 295  
296 296  
297 297  )))
... ... @@ -298,7 +298,6 @@
298 298  
299 299  == 3.4  Use built-in 4G modem for internet access ==
300 300  
301 -
302 302  If the LG308N has 3G/4G Cellular modem, user can use it as main internet connection or back up.
303 303  
304 304  
... ... @@ -309,7 +309,12 @@
309 309  [[image:image-20220705171836-8.png]]
310 310  
311 311  
314 +
312 312  (((
316 +
317 +)))
318 +
319 +(((
313 313  The set up page is (% style="color:#4f81bd" %)**System ~-~-> Cellular**
314 314  )))
315 315  
... ... @@ -320,13 +320,12 @@
320 320  )))
321 321  
322 322  (((
323 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916141840-23.png?rev=1.1||alt="image-20220916141840-23.png" height="356" width="868"]]
330 +[[image:image-20220705171919-9.png]]
324 324  )))
325 325  
326 326  
327 327  == 3.5  Check Internet connection ==
328 328  
329 -
330 330  In the (% style="color:#4f81bd" %)**home**(%%) page, we can check the Internet connection.
331 331  
332 332  * GREEN Tick ​​​​ [[image:1652436675869-206.png||height="14" width="15"]] : This interface has Internet connection.
... ... @@ -338,14 +338,10 @@
338 338  
339 339  = 4.  Example: Configure as a LoRaWAN gateway =
340 340  
341 -
342 342  LG308N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
343 343  
344 -
345 345  (((
346 346  [[image:1657012860422-990.png]]
347 -
348 -
349 349  )))
350 350  
351 351  This chapter describes how to use the LG308N to work with(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
... ... @@ -355,16 +355,12 @@
355 355  
356 356  
357 357  (((
358 -(% style="color:blue" %)**Step 1: Get a Unique gateway ID.**
359 -
360 -
360 +(% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
361 361  )))
362 362  
363 363  (((
364 364  (((
365 365  Every LG308N has a unique gateway id. The ID can be found at LoRaWAN page:
366 -
367 -
368 368  )))
369 369  )))
370 370  
... ... @@ -377,24 +377,17 @@
377 377  The example gateway id is: (% style="color:green" %)**a840411e96744154**
378 378  
379 379  
378 +(% style="color:#4f81bd" %)**Step 2: Sign up a user account in TTN server**
380 380  
381 -(% style="color:blue" %)**Step 2: Sign up a user account in TTN server**
382 -
383 -
384 384  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
385 385  
386 -
387 387  [[image:1652422127479-258.png||height="346" width="738"]]
388 388  
389 389  
385 +(% style="color:#4f81bd" %)**Step 3: Choose the TTNv3 Cluster Picker**
390 390  
391 -(% style="color:blue" %)**Step 3: Choose the TTNv3 Cluster Picker**
392 -
393 -
394 394  (((
395 395  [[image:1652422142236-792.png||height="356" width="737"]]
396 -
397 -
398 398  )))
399 399  
400 400  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
... ... @@ -405,14 +405,12 @@
405 405  * Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
406 406  * Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
407 407  
408 -(% style="color:blue" %)**Step 4: Create a Gateway**
399 +(% style="color:#4f81bd" %)**Step 4: Create a Gateway**
409 409  
410 -
411 411  [[image:1652422440891-514.png||height="360" width="747"]]
412 412  
413 413  Click the Gateway icon and then click Add gateway.
414 414  
415 -
416 416  Open the following page:
417 417  
418 418   [[image:1652422470352-518.png||height="391" width="716"]]
... ... @@ -422,20 +422,16 @@
422 422  
423 423  
424 424  (((
425 -(% style="color:red" %)**Notice: Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.**
426 -
427 -
414 +(% style="color:red" %)**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
428 428  )))
429 429  
430 430  After creating the gateway, you can see the gateway info, as below.
431 431  
432 -
433 433  [[image:1652422509034-682.png||height="299" width="739"]]
434 434  
435 435  
436 436  == 4.2  Configure LG308N to connect to TTN v3 ==
437 437  
438 -
439 439  (((
440 440  You can now configure the LG308N to let it connect to TTN network V3.
441 441  )))
... ... @@ -445,33 +445,26 @@
445 445  )))
446 446  
447 447  (((
448 -Choose the right server provider and click (% style="color:blue" %)**Save&Apply.**
449 -
450 -
433 +Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply**
451 451  )))
452 452  
453 453  [[image:1652422624783-580.png||height="327" width="729"]]
454 454  
438 +(% style="color:red" %)**Note: **The server address must match the Gateway server address you choose in TTN V3.
455 455  
456 -(% style="color:red" %)**Note: The server address must match the Gateway server address you choose in TTN V3.**
457 457  
458 -
459 459  In the home page, we can see the LoRaWAN connection is ready now.
460 460  
443 +[[image:1657014479765-850.png]]
461 461  
462 -[[image:image-20220916171413-2.png]]
463 463  
464 -
465 -
466 466  In TTN v3 portal, we can also see the gateway is connected.
467 467  
468 -
469 469  [[image:1652422703020-955.png||height="343" width="730"]]
470 470  
471 471  
472 472  == 4.3  Configure frequency ==
473 473  
474 -
475 475  We also need to set the frequency plan in LG308N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
476 476  
477 477  
... ... @@ -485,7 +485,6 @@
485 485  
486 486  == 4.4  Add a LoRaWAN End Device ==
487 487  
488 -
489 489  (((
490 490  This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
491 491  )))
... ... @@ -497,7 +497,7 @@
497 497  [[image:1652422794767-871.png]]
498 498  
499 499  (((
500 -(% style="color:blue" %)**Step 1**: (% style="color:black" %)Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
477 +(% style="color:#4f81bd" %)**Step 1**: (% style="color:black" %)Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
501 501  )))
502 502  
503 503  (((
... ... @@ -512,15 +512,13 @@
512 512  
513 513  
514 514  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
515 -
516 -
517 517  )))
518 518  
519 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20230426083319-1.png?width=556&height=258&rev=1.1||alt="image-20230426083319-1.png"]]
494 +[[image:1652422840936-838.png]]
520 520  
521 521  
522 522  (((
523 -(% style="color:red" %)**Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.**
498 +(% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
524 524  
525 525  
526 526  )))
... ... @@ -572,27 +572,22 @@
572 572  )))
573 573  
574 574  (((
575 -(% style="color:blue" %)**Step 2**: (% style="color:black" %)Power on LT-22222-L device and it will automatically join the TTN network. After joining successfully, it will start to upload messages to the TTN v3. Select the Live data tab and you will see the data appearing in the panel.
576 -
577 -
550 +(% style="color:#4f81bd" %)**Step 2**: (% style="color:black" %)Power on LT-22222-L device and it will automatically join the TTN network. After joining successfully, it will start to upload messages to the TTN v3. Select the Live data tab and you will see the data appearing in the panel.
578 578  )))
579 579  
580 580  (((
581 -(% style="color:red" %)**Note that it may take some time for the device data to appear in the TTN v3 display.**
582 -
583 -
554 +(% style="color:red" %)Note that it may take some time for the device data to appear in the TTN v3 display.
584 584  )))
585 585  
586 586  [[image:1652423277549-324.png||height="273" width="745"]]
587 587  
559 +
588 588  = 5.  Web Configure Pages =
589 589  
590 590  == 5.1  Home ==
591 591  
592 -
593 593  Shows the system running status.
594 594  
595 -
596 596  [[image:1657014949846-507.png]]
597 597  
598 598  
... ... @@ -600,7 +600,6 @@
600 600  
601 601  === 5.2.1  LoRa ~-~-> LoRa ===
602 602  
603 -
604 604  (((
605 605  This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customized the band* as well.
606 606  )))
... ... @@ -613,20 +613,16 @@
613 613  * (% style="color:blue" %)**915**(%%): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
614 614  
615 615  (((
616 -After user choose the frequency plan, he can see the actually frequency in used by checking the page (% style="color:blue" %)**LogRead ~-~-> LoRa Log**
617 -
618 -
585 +After user choose the frequency plan, he can see the actually frequency in used by checking the page **LogRead ~-~-> LoRa Log**
619 619  )))
620 620  
621 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LG308N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652422737399-529.png?rev=1.1||alt="1652422737399-529.png"]]
588 +[[image:1652423554776-574.png||height="380" width="740"]]
622 622  
590 +Note *: **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
623 623  
624 -(% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
625 625  
626 -
627 627  === 5.2.2  LoRa ~-~-> ABP Decryption ===
628 628  
629 -
630 630  The LG308N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
631 631  
632 632  * No internet connection.
... ... @@ -636,11 +636,9 @@
636 636  
637 637  
638 638  Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
639 -
640 -
641 641  )))
642 642  
643 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916114346-7.png?rev=1.1||alt="image-20220916114346-7.png" height="359" width="876"]]
606 +[[image:1652423628833-467.png||height="357" width="755"]]
644 644  
645 645  
646 646  == 5.3  LoRaWAN Settings ==
... ... @@ -647,13 +647,10 @@
647 647  
648 648  === 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
649 649  
613 +This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc
650 650  
651 -This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc.
615 +[[image:1652423628833-467.png||height="357" width="755"]]
652 652  
653 -
654 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916114929-8.png?rev=1.1||alt="image-20220916114929-8.png" height="707" width="860"]]
655 -
656 -
657 657  (% style="color:red" %)**Note:**
658 658  
659 659  ~*: User can ignore the latitude and longitude settings here, LG308N will use the actually value from GPS module.
... ... @@ -663,33 +663,21 @@
663 663  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
664 664  
665 665  
666 -=== 5.3.2  LoRaWAN ~-~-> LoRaWAN ~-~- Basic Station ===
667 667  
627 +=== 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
668 668  
669 -[[image:image-20230406173729-1.png]]
629 +[[image:1652428499323-384.png||height="275" width="723"]]
670 670  
671 671  
672 -The basic station mode support **TTN/AWS/Chirpstack/ThingPark/Senet** Platform.
632 +(((
633 +Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
673 673  
674 -Instruction:
675 675  
676 - [[The Thing Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20TTN/#H3.A0GatewayRegistrationforBasicsStation]]      
677 -
678 - [[AWS-IoT LoRaWAN Core>>url:http://wiki.dragino.com/xwiki/bin/view/Main/AWS%20IoT%20Core%20for%20LoRaWAN/]]
679 -
680 - [[Chirpstack>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H3.A0GatewayRegistrationforBasicsStation]]
681 -
682 - ThingPark
683 -
684 - [[Senet>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Connection%20to%20Senet/#H3.A0SemtechBasicStation]]
685 -
686 -(((
687 687  
688 688  )))
689 689  
690 690  === 5.3.3  LoRaWAN ~-~-> LORIOT ===
691 691  
692 -
693 693  (((
694 694  Settings to communicate to LORIOT LoRaWAN Network Server: [[https:~~/~~/www.loriot.io/>>url:https://www.loriot.io/]]
695 695  )))
... ... @@ -696,16 +696,13 @@
696 696  
697 697  (((
698 698  Instruction: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
699 -
700 -
701 701  )))
702 702  
703 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916115143-9.png?rev=1.1||alt="image-20220916115143-9.png" height="316" width="864"]](% style="display:none" %)
649 +[[image:1652428648903-878.png||height="266" width="731"]]
704 704  
705 705  
706 706  == 5.4  MQTT Settings ==
707 707  
708 -
709 709  (((
710 710  If end nodes works in ABP mode, user can configure LG308N to transfer the data to MQTT broker,
711 711  )))
... ... @@ -718,29 +718,27 @@
718 718  [[image:1652428705046-212.png||height="417" width="733"]]
719 719  
720 720  
666 +
721 721  == 5.5  System ==
722 722  
723 723  === 5.5.1  System ~-~-> System Overview ===
724 724  
725 -
726 726  Shows the system info:
727 727  
673 +[[image:1652428773760-580.png||height="408" width="728"]]
728 728  
729 -[[image:image-20220916173046-3.png||height="613" width="868"]]
730 730  
731 731  
732 732  === 5.5.2  System ~-~-> General ( login settings) ===
733 733  
679 +[[image:1652428861256-300.png||height="354" width="724"]]
734 734  
735 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916134411-11.png?rev=1.1||alt="image-20220916134411-11.png" height="499" width="865"]](% style="display:none" %)
736 -
737 -
738 738  (((
739 -(% style="color:#037691" %)**__System Password:__**
682 +**__System Password:__**
740 740  )))
741 741  
742 742  (((
743 -There are two login for DLOS8: (% style="color:#4f81bd" %)**root /dragino** (% style="color:black" %)or (% style="color:#4f81bd" %)**admin /dragino**. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
686 +There are two login for DLOS8: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
744 744  )))
745 745  
746 746  (((
... ... @@ -748,63 +748,60 @@
748 748  )))
749 749  
750 750  (((
751 -(% style="color:#037691" %)**__Timezone: __**(%%)Set device timezone.
694 +**__Timezone: __**Set device timezone.
752 752  )))
753 753  
754 754  (((
755 -(% style="color:#037691" %)**__Port forwarding: __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
698 +**__Port forwarding: __**Enable/Disable the HTTP and SSH access via WAN interface.
756 756  
700 +
757 757  
758 758  )))
759 759  
760 760  === 5.5.3  System ~-~-> Network ===
761 761  
706 +[[image:1652429149053-824.png||height="467" width="725"]]
762 762  
763 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916134642-12.png?rev=1.1||alt="image-20220916134642-12.png" height="411" width="873"]]
764 -
765 -
766 766  (((
767 -(% style="color:#037691" %)**__LAN Settings:  __**(%%)When the LG308N has the AP enable, LAN settings specify the network info for LG308N's own network.
709 +**__LAN Settings:  __**When the LG308N has the AP enable, LAN settings specify the network info for LG308N's own network.
768 768  )))
769 769  
770 770  (((
771 -(% style="color:#037691" %)__**WAN Settings: **__(%%)Setting for LG308N WAN port
713 +__**WAN Settings: **__Setting for LG308N WAN port
772 772  )))
773 773  
774 774  (((
775 -(% style="color:#037691" %)__**WiFi Settings:  **__(%%)Setting for LG308N WiFi IP when use it as WiFi Client
717 +__**WiFi Settings:  **__Setting for LG308N WiFi IP when use it as WiFi Client
776 776  )))
777 777  
778 778  
721 +
779 779  === 5.5.4  System ~-~-> WiFi ===
780 780  
781 -
782 782  LG308N WiFi Settings.
783 783  
784 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916134831-13.png?rev=1.1||alt="image-20220916134831-13.png" height="408" width="870"]]
726 +[[image:1652429430767-921.png||height="367" width="723"]]
785 785  
786 786  
729 +
787 787  === 5.5.5  System ~-~-> Cellular ===
788 788  
789 -
790 790  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
791 791  
734 +[[image:1652429309615-825.png||height="320" width="732"]]
792 792  
793 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916135100-14.png?rev=1.1||alt="image-20220916135100-14.png" height="347" width="874"]](% style="display:none" %)
736 +(% style="color:red" %)Note *: For LG308N which doesn't have the cellular module, this page will shows Cellular not detected.
794 794  
795 795  
796 -(% style="color:red" %)**Note *: For LG308N which doesn't have the cellular module, this page will shows Cellular not detected.**
797 797  
798 -
799 799  === 5.5.6  System ~-~-> Network Status ===
800 800  
742 +[[image:1652429486609-208.png||height="415" width="728"]]
801 801  
802 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916135207-15.png?rev=1.1||alt="image-20220916135207-15.png" height="599" width="882"]]
803 803  
804 804  
805 805  === 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
806 806  
807 -
808 808  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
809 809  
810 810  [[image:1652429518191-846.png||height="332" width="733"]]
... ... @@ -813,21 +813,19 @@
813 813  
814 814  [[image:1652429537849-154.png||height="339" width="722"]]
815 815  
816 -
817 817  Please see this document for detail:
818 818  
819 819  [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
820 820  
821 821  
822 -R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Monitor & Remote Access Gateway.WebHome]]**
761 +R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Remote Access Gateway.WebHome]]**
823 823  
824 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140017-16.png?rev=1.1||alt="image-20220916140017-16.png" height="593" width="872"]]
763 +[[image:1652429624400-864.png||height="432" width="716"]]
825 825  
826 -(% style="display:none" %) (%%)
827 827  
766 +
828 828  === 5.5.8  System ~-~-> Firmware Upgrade ===
829 829  
830 -
831 831  We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
832 832  
833 833  * **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
... ... @@ -841,39 +841,30 @@
841 841  
842 842  
843 843  (((
844 -The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(%%)is the upgrade Image. There are different methods to upgrade, as below.
782 +The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
845 845  )))
846 846  
847 847  (((
848 848  (% style="color:green" %)**Web~-~-> System~-~-> Firmware Upgrade**
849 -
850 -
851 851  )))
852 852  
853 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140103-17.png?rev=1.1||alt="image-20220916140103-17.png" height="274" width="871"]]
789 +[[image:1652429711145-862.png||height="270" width="737"]]
854 854  
855 855  
856 856  (((
857 -Select the required image and click (% style="color:blue" %)**Flash Image.**(%%) The image will be uploaded to the device, and then click (% style="color:blue" %)**Process Update** (%%)to upgrade.
858 -
859 -
793 +Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
860 860  )))
861 861  
862 862  (((
863 -(% style="color:red" %)**NOTE**: (%%)You normally need to (% style="color:blue" %)**//uncheck//**(%%) the (% style="color:blue" %)**Preserve Settings**(%%) checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
864 -
865 -
797 +(% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
866 866  )))
867 867  
868 868  (((
869 869  The system will automatically boot into the new firmware after upgrade.
870 -
871 -
872 872  )))
873 873  
874 874  [[image:1652429962190-224.png||height="358" width="729"]]
875 875  
876 -
877 877  (% style="color:red" %)**NOTE***(%%): User can also upgrade firmware via Linux console
878 878  
879 879  SCP the firmware to the system(% style="color:green" %)**/var**(%%)** **directory and then run
... ... @@ -884,161 +884,68 @@
884 884  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
885 885  
886 886  
816 +
887 887  === 5.5.9  System ~-~-> Reboot/Reset ===
888 888  
819 +[[image:1652430197132-330.png||height="256" width="724"]]
889 889  
890 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140312-18.png?rev=1.1||alt="image-20220916140312-18.png" height="274" width="873"]]
891 -
892 892  (((
893 893  
823 +
824 +
894 894  )))
895 895  
896 896  === 5.5.10  System ~-~-> Package Maintain ===
897 897  
829 +[[image:1652430243826-126.png||height="289" width="723"]]
898 898  
899 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140421-19.png?rev=1.1||alt="image-20220916140421-19.png" height="687" width="868"]]
900 -
901 -
902 902  Place to show what package has installed and possible to upgrade packages.
903 903  
904 904  
834 +
905 905  == 5.6  LogRead ==
906 906  
907 907  === 5.6.1  LogRead ~-~-> LoRa Log ===
908 908  
909 -
910 910  Show the frequency for LoRa Radio and traffics.
911 911  
841 +[[image:1657069890320-513.png]]
912 912  
913 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140549-20.png?rev=1.1||alt="image-20220916140549-20.png" height="734" width="883"]]
914 914  
915 915  
845 +
916 916  === 5.6.2  LogRead ~-~-> System Log ===
917 917  
918 -
919 919  Show the system log
920 920  
850 +[[image:1657069922599-794.png]]
921 921  
922 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140732-21.png?rev=1.1||alt="image-20220916140732-21.png" height="706" width="867"]]
923 923  
924 924  
925 925  = 6.  More features =
926 926  
927 -== 6.1 Packet Filtering ==
856 +== 6.1  More instructions ==
928 928  
929 -
930 -Drop unwanted packets.
931 -
932 -See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]
933 -
934 -
935 -== 6.2 Remote Access ==
936 -
937 -
938 -Remote Access Devices for management.
939 -
940 -Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access]]
941 -
942 -
943 -== 6.3 How to decode ABP LoRaWAN node ==
944 -
945 -
946 -Decode ABP:
947 -
948 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20~~-~~--%20LG308/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20---%20LG308/]]
949 -
950 -
951 -== 6.4 How to set data to MQTT broker ==
952 -
953 -
954 -Only support ABP LoRaWAN End Node
955 -
956 -Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]
957 -
958 -
959 -== 6.5 How the gateway connects to Chirpstack v3/v4 via gateway-bridge ==
960 -
961 -
962 -**For Chirpstack v3 Gateway-bridge**:
963 -
964 -The corresponding gateway firmware must be used :
965 -
966 -[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge~~-~~-build-v5.4.1679487778-20230322-2024/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge--build-v5.4.1679487778-20230322-2024/]]
967 -
968 -Chirpstack v3 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge]]
969 -
970 -
971 -**For Chirpstack v4 Gateway-bridge**:
972 -
973 -The corresponding gateway firmware must be used :
974 -
975 -[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V4~~-~~-build-v5.4.1670655072-20221210-1452/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V4--build-v5.4.1670655072-20221210-1452/]]
976 -
977 -Chirpstack v4 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge]]
978 -
979 -
980 -(% style="color:red" %)**NOTE***(%%): Different chirpstack versions use different gateway-bridge configurations.
981 -
982 -After updating the Chirpstack gateway-bridge firmware, there is no need to re-download and install the Chirpstack gateway-bridge package
983 -
984 -
985 -== 6.6 How to extend the gateway size of memory with USB device (SD/TF card, USB flash drive). ==
986 -
987 -USB card reader plugged into the USB port of the gateway
988 -
989 -
990 -Access the gateway Linux Command Line
991 -
992 -
993 -Check the USB device
994 -
995 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425165308-2.png?rev=1.1||alt="image-20230425165308-2.png"]]
996 -
997 -
998 -**Mount the USB device**
999 -
1000 -(% class="box infomessage" %)
1001 -(((
1002 -**mount /dev/sda1 /mnt/**
1003 -)))
1004 -
1005 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425174131-4.png?rev=1.1||alt="image-20230425174131-4.png"]]
1006 -
1007 -
1008 -**Set up the automatic mount on boot**
1009 -
1010 -(% class="box infomessage" %)
1011 -(((
1012 -**sed -i '3cmount \/dev\/sda1 \/mnt\/' /etc/rc.local **
1013 -)))
1014 -
1015 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425173831-3.png?width=833&height=105&rev=1.1||alt="image-20230425173831-3.png"]]
1016 -
1017 -
1018 -== 6.7  More instructions ==
1019 -
1020 -
1021 1021  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
1022 1022  
1023 1023  
861 +
1024 1024  = 7.  Linux System =
1025 1025  
1026 -
1027 1027  The LG308N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
1028 1028  
1029 1029  
1030 1030  == 7.1  SSH Access for Linux console ==
1031 1031  
1032 -
1033 1033  User can access the Linux console via the SSH protocol. Make sure your PC and the LG308N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
1034 1034  
1035 -**IP address:  (% style="color:blue" %)IP address of LG308N(%%)**
871 +IP address:  IP address of LG308N
1036 1036  
1037 -**Port:  (% style="color:blue" %)22 (via WiFi AP mode) or 2222 (via WAN Interface)(%%)**
873 +Port:         22 (via WiFi AP mode) or 2222 (via WAN Interface)
1038 1038  
1039 -**User Name:      (% style="color:blue" %)root(%%)**
875 +User Name:      (% style="color:green" %)**root**
1040 1040  
1041 -**Password:         (% style="color:blue" %)dragino(default)(%%)**
877 +Password:         (% style="color:green" %)**dragino** (% style="color:black" %)(default)
1042 1042  
1043 1043  
1044 1044  After logging in, you will be in the Linux console and can enter commands as shown below.
... ... @@ -1046,15 +1046,14 @@
1046 1046  [[image:1652431588565-830.png]]
1047 1047  
1048 1048  
1049 -The “** (% style="color:blue" %)logread -f"(%%)**command can be used to debug how system runs.
885 +The “(% class="mark" %)**logread -f**(%%)” command can be used to debug how system runs.
1050 1050  
1051 -
1052 1052  [[image:1657070133275-283.png]]
1053 1053  
1054 1054  
890 +
1055 1055  == 7.2  Edit and Transfer files ==
1056 1056  
1057 -
1058 1058  (((
1059 1059  The LG308N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
1060 1060  )))
... ... @@ -1069,8 +1069,6 @@
1069 1069  
1070 1070  (((
1071 1071  Screenshot is as below:
1072 -
1073 -
1074 1074  )))
1075 1075  
1076 1076  [[image:1652431650755-450.png]]
... ... @@ -1078,7 +1078,6 @@
1078 1078  
1079 1079  == 7.3  File System ==
1080 1080  
1081 -
1082 1082  (((
1083 1083  (((
1084 1084  The LG308N has a 16MB flash and a 64MB RAM. The /var and /tmp directory are in the RAM, contents stored in /tmp and /var will be erased after reboot the device. Other directories are in the flash and will keep after reboot.
... ... @@ -1091,11 +1091,11 @@
1091 1091  )))
1092 1092  
1093 1093  
926 +
1094 1094  == 7.4  Package maintenance system ==
1095 1095  
929 +LG308N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
1096 1096  
1097 -LG308N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure LG308N to use **//iperf //**.
1098 -
1099 1099  (((
1100 1100  Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
1101 1101  )))
... ... @@ -1146,6 +1146,7 @@
1146 1146  (((
1147 1147  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
1148 1148  
981 +
1149 1149  
1150 1150  )))
1151 1151  
... ... @@ -1153,17 +1153,10 @@
1153 1153  
1154 1154  
1155 1155  
1156 -= 9.  OTA System Update =
989 += 9.  FAQ =
1157 1157  
991 +== 9.1  How can I configure for a customized frequency band? ==
1158 1158  
1159 -LG308N supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
1160 -
1161 -
1162 -= 10.  FAQ =
1163 -
1164 -== 10.1  How can I configure for a customized frequency band? ==
1165 -
1166 -
1167 1167  (((
1168 1168  See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
1169 1169  )))
... ... @@ -1172,15 +1172,13 @@
1172 1172  
1173 1173  )))
1174 1174  
1175 -== 10.2  Can I connect LG308N to LORIOT? ==
1001 +== 9.2  Can I connect LG308N to LORIOT? ==
1176 1176  
1177 -
1178 1178  Yes, the set up instruction is here: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
1179 1179  
1180 1180  
1181 -== 10.3  Can I make my own firmware for the gateway, where can I find the source code? ==
1006 +== 9.3  Can I make my own firmware for the gateway, where can I find the source code? ==
1182 1182  
1183 -
1184 1184  (((
1185 1185  Yes, You can make your own firmware for the LG308N for branding purposes or to add customized applications.
1186 1186  )))
... ... @@ -1190,15 +1190,13 @@
1190 1190  )))
1191 1191  
1192 1192  
1193 -== 10.4  Can I use 868Mhz version for 915Mhz bands? ==
1017 +== 9.4  Can I use 868Mhz version for 915Mhz bands? ==
1194 1194  
1195 -
1196 1196  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
1197 1197  
1198 1198  
1199 -== 10.5  Can I control the LEDs? ==
1022 +== 9.5  Can I control the LEDs? ==
1200 1200  
1201 -
1202 1202  Except the PWR LED is controlled by +3v3 power directly. All other LEDs can be controlled by developer.
1203 1203  
1204 1204  
... ... @@ -1222,10 +1222,10 @@
1222 1222  OFF: echo 1 > /sys/class/gpio/gpio27/value
1223 1223  
1224 1224  
1225 -= 11.  Trouble Shooting =
1226 1226  
1227 -== 11.1  I get kernel error when install new package, how to fix? ==
1048 += 10.  Trouble Shooting =
1228 1228  
1050 +== 10.1  I get kernel error when install new package, how to fix? ==
1229 1229  
1230 1230  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
1231 1231  
... ... @@ -1248,8 +1248,8 @@
1248 1248  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
1249 1249  
1250 1250  
1251 -== 11.2  How to recover the LG308N if the firmware crashes ==
1252 1252  
1074 +== 10.2  How to recover the LG308N if the firmware crashes ==
1253 1253  
1254 1254  (((
1255 1255  Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
... ... @@ -1259,12 +1259,10 @@
1259 1259  
1260 1260  )))
1261 1261  
1262 -== 11.3  I configured LG308N for WiFi access and lost its IP. What to do now? ==
1084 +== 10.3  I configured LG308N for WiFi access and lost its IP. What to do now? ==
1263 1263  
1264 -
1265 1265  [[image:1657074078183-336.png]]
1266 1266  
1267 -
1268 1268  (((
1269 1269  (((
1270 1270  The LG308N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access LG308N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
... ... @@ -1271,14 +1271,13 @@
1271 1271  )))
1272 1272  )))
1273 1273  
1274 -
1275 1275  (((
1276 -(% style="color:red" %)**Note: fallback IP can be disabled in the WAN and DHCP page.**
1095 +(% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
1277 1277  )))
1278 1278  
1279 1279  
1280 1280  (((
1281 -**Steps to connect via fall back IP:**
1100 +Steps to connect via fall back IP:
1282 1282  )))
1283 1283  
1284 1284  (((
... ... @@ -1287,45 +1287,41 @@
1287 1287  
1288 1288  (((
1289 1289  2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
1290 -
1291 -
1292 1292  )))
1293 1293  
1294 1294  (((
1295 1295  As below photo:
1296 -
1297 -
1298 1298  )))
1299 1299  
1300 1300  [[image:1652435256286-879.png]]
1301 1301  
1302 -
1303 1303  3. In PC, use 172.31.255.254 to access LG308N via Web or Console.
1304 1304  
1305 1305  
1306 -= 12.  Order Info =
1307 1307  
1121 += 11.  Order Info =
1308 1308  
1309 -**PART:(% style="color:blue" %) DLOS8N-XXX-YYY: (%%)**(% style="color:blue" %)
1310 1310  
1311 -(% style="color:blue" %)**XXX:**(%%)** Frequency Band**
1124 +(% style="color:#4f81bd" %)**//PART: DLOS8N-XXX-YYY//: **
1312 1312  
1313 -* (% style="color:red" %)** 868**(%%) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1314 -* (% style="color:red" %)** 915**(%%):  valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1126 +(% style="color:#4f81bd" %)**//XXX: Frequency Band//**
1315 1315  
1128 +* (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1129 +* (% style="color:red" %)** 915**(% style="color:black" %):  valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1130 +
1316 1316  (% style="color:#4f81bd" %)
1317 1317  
1318 -(% style="color:blue" %)**YYY:**(%%)** 4G Cellular Option**
1133 +(% style="color:#4f81bd" %)**//YYY: 4G Cellular Option//**
1319 1319  
1320 -* (% style="color:red" %)** EC25-E**(%%):  EMEA, Korea, Thailand, India.
1321 -* (% style="color:red" %)** EC25-A**(%%):  North America/ Rogers/AT&T/T-Mobile.
1322 -* (% style="color:red" %)** EC25-AU**(%%): Latin America, New Zeland, Taiwan
1323 -* (% style="color:red" %)** EC25-J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
1135 +* (% style="color:red" %)** EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1136 +* (% style="color:red" %)** EC25-A**(% style="color:black" %):  North America/ Rogers/AT&T/T-Mobile.
1137 +* (% style="color:red" %)** EC25-AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1138 +* (% style="color:red" %)** EC25-J**(% style="color:black" %):  Japan, DOCOMO/SoftBank/ KDDI
1324 1324  
1325 1325  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1326 1326  
1327 1327  
1328 -= 13.  Packing Info =
1143 += 12.  Packing Info =
1329 1329  
1330 1330  (((
1331 1331  
... ... @@ -1349,19 +1349,17 @@
1349 1349  * Package Size: 49 x 19.5 x x 19Package Size: 4912 cm
1350 1350  * Weight: 2.5kg
1351 1351  
1352 -= 14.  Support =
1353 1353  
1168 += 13.  Support =
1354 1354  
1355 1355  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1356 -
1357 1357  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
1358 1358  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
1173 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1359 1359  
1360 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to: [[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1361 1361  
1362 -= 15.  Reference =
1176 += 14.  Reference =
1363 1363  
1364 -
1365 1365  * Source code for LG08 LoRa Gateway: [[https:~~/~~/github.com/dragino/openwrt_lede-18.06>>url:https://github.com/dragino/openwrt_lede-18.06]]
1366 1366  
1367 1367  * OpenWrt official Wiki: [[http:~~/~~/www.openwrt.org/>>url:http://www.openwrt.org/]]
1663317843420-717.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -86.8 KB
Content
image-20220916164504-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -42.4 KB
Content
image-20220916171413-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -143.3 KB
Content
image-20220916173046-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -142.9 KB
Content
image-20221101103113-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230406173729-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -85.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0