Last modified by Kilight Cao on 2025/02/07 08:57
<
From version < 139.1 >
edited by Xiaoye
on 2023/04/06 17:37
To version < 127.10 >
edited by Xiaoling
on 2022/07/29 16:10
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Xiaoling
Content
... ... @@ -21,6 +21,7 @@
21 21  
22 22  = 1.  Introduction =
23 23  
24 +
24 24  == 1.1  What is the LG308N ==
25 25  
26 26  
... ... @@ -49,6 +49,7 @@
49 49  [[image:1657010949218-224.png]]
50 50  
51 51  
53 +
52 52  == 1.2  Specifications ==
53 53  
54 54  
... ... @@ -62,6 +62,9 @@
62 62  * 64MB RAM
63 63  * 16MB Flash
64 64  
67 +
68 +
69 +
65 65  (% style="color:#037691" %)**Interface:**
66 66  
67 67  * 10M/100M RJ45 Ports x 2
... ... @@ -73,6 +73,9 @@
73 73  * Mini-PCI E connector x 1
74 74  * SX1302 + 2 x SX1250
75 75  
81 +
82 +
83 +
76 76  (% style="color:#037691" %)**WiFi Spec:**
77 77  
78 78  * IEEE 802.11 b/g/n
... ... @@ -86,6 +86,9 @@
86 86  ** 11g 54M : -71dbm
87 87  ** 11n 20M : -67dbm
88 88  
97 +
98 +
99 +
89 89  (% style="color:#037691" %)**LoRa Spec:**
90 90  
91 91  * Up to -142.5 dBm sensitivity with SX1250 Tx/Rx front-end
... ... @@ -97,6 +97,9 @@
97 97  * Dynamic data-rate (DDR) adaptation
98 98  * True antenna diversity or simultaneous dual-band operation
99 99  
111 +
112 +
113 +
100 100  (% style="color:#037691" %)**Cellular 4G LTE (optional):**
101 101  
102 102  * Quectel: [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
... ... @@ -107,6 +107,9 @@
107 107  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
108 108  
109 109  
124 +
125 +
126 +
110 110  == 1.3  Features ==
111 111  
112 112  
... ... @@ -117,12 +117,16 @@
117 117  * 10 programmable parallel demodulation paths
118 118  
119 119  
137 +
138 +
139 +
120 120  == 1.4  Hardware System Structure ==
121 121  
122 122  
123 -[[image:image-20221101103113-1.png]]
143 +[[image:1657011152828-178.png]]
124 124  
125 125  
146 +
126 126  == 1.5  LG308N Applications ==
127 127  
128 128  
... ... @@ -129,6 +129,7 @@
129 129  [[image:1657011208596-209.png]]
130 130  
131 131  
153 +
132 132  == 1.6  LED Indicators ==
133 133  
134 134  
... ... @@ -149,22 +149,12 @@
149 149  )))
150 150  
151 151  
152 -== 1.7 Button Instruction ==
174 +(((
175 +(((
176 +
177 +)))
178 +)))
153 153  
154 -
155 -LG308N has a black toggle button, which is:
156 -
157 -
158 -(% style="color:blue" %)**//➢ //Long press 4-5s:                     **(%%)the gateway will reload the Network and Initialize wifi configuration
159 -
160 - **LED status: ** SYS LED will BLINKING RED Until the reload is finished.
161 -
162 -
163 -(% style="color:blue" %)**➢ Long press more than 30s:    **(%%)the gateway will restart and restore factory settings.
164 -
165 - **LED status: ** When the user releases the button, the LED will TURN OFF.
166 -
167 -
168 168  = 2.  Access and Configure LG308N =
169 169  
170 170  
... ... @@ -171,17 +171,17 @@
171 171  The LG308N is configured as a WiFi Access Point by default. User can access and configure the LG308N after connecting to its WiFi network, or via its Ethernet port.
172 172  
173 173  
186 +
174 174  == 2.1  Find IP address of LG308N ==
175 175  
189 +
176 176  === 2.1.1  Connect via WiFi ===
177 177  
178 -
179 179  [[image:1657011715859-829.png]]
180 180  
181 181  
182 182  At the first boot of LG308N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
183 183  
184 -
185 185  (% style="color:red" %)**Note: In latest version firmware, it has been password protected and the password is:  **(% style="background-color:yellow" %)**dragino+dragino**
186 186  
187 187  
... ... @@ -191,6 +191,7 @@
191 191  (((
192 192  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LG308N has the default IP (% style="color:green" %)**10.130.1.1**
193 193  
206 +
194 194  
195 195  )))
196 196  
... ... @@ -199,10 +199,12 @@
199 199  
200 200  [[image:1657011966663-484.png]]
201 201  
202 -
203 203  (((
204 204  Alternatively, connect the LG308N** __WAN port__** to your router and LG308N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG308N. You can also use this IP to connect.
217 +)))
205 205  
219 +
220 +(((
206 206  
207 207  )))
208 208  
... ... @@ -211,12 +211,12 @@
211 211  
212 212  [[image:1657012061799-674.png]]
213 213  
214 -
215 215  (((
216 216  The LG308N __**LAN port**__ is configured as DHCP router by default, user can connect the PC to LAN port and set PC to DHCP mode, it will get IP from LAN port and be able to access to the device. The default IP in LAN port is 10.130.1.1
217 217  )))
218 218  
219 219  
234 +
220 220  === 2.1.4  Connect WiFi with DHCP IP from router ===
221 221  
222 222  
... ... @@ -226,6 +226,7 @@
226 226  If the LG308N already connect to the router via WiFi, use can use the WiFi IP to connect to LG308N.
227 227  
228 228  
244 +
229 229  === 2.1.5  Connect via LAN port by fall back ip ===
230 230  
231 231  
... ... @@ -232,6 +232,7 @@
232 232  The **LAN port** also has a [[fall back ip address>>path:#fallback_ip]] for access if user doesn't connect to uplink router.
233 233  
234 234  
251 +
235 235  == 2.2  Access Configure Web UI ==
236 236  
237 237  
... ... @@ -243,7 +243,7 @@
243 243  
244 244  or
245 245  
246 -http:~/~/IP_ADDRESS or http:~/~/ IP_ADDRESS:8000
263 +http:~/~/IP_ADDRESS or [[http:~~/~~/ IP_ADDRESS:8000>>url:http://192.168.1.xx:8000]]
247 247  
248 248  
249 249  You will see the login interface of DLOS8N as shown below.
... ... @@ -254,12 +254,13 @@
254 254  
255 255  (% style="color:#4f81bd" %)**Password:   dragino**
256 256  
257 -
258 258  [[image:1652414287022-223.png]]
259 259  
260 260  
277 +
261 261  = 3.  Typical Network Setup =
262 262  
280 +
263 263  == 3.1  Overview ==
264 264  
265 265  
... ... @@ -273,15 +273,18 @@
273 273  * **Cellular Mode**
274 274  
275 275  
294 +
295 +
296 +
276 276  == 3.2  Use WAN port to access Internet ==
277 277  
278 278  
279 279  By default, the LG308N is set to use the WAN port to connect to an upstream network. When you connect the LG308N's WAN port to an upstream router, LG308N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
280 280  
281 -
282 282  [[image:1657012559318-672.png]]
283 283  
284 284  
305 +
285 285  == 3.3  Access the Internet as a WiFi Client ==
286 286  
287 287  
... ... @@ -291,11 +291,12 @@
291 291  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
292 292  )))
293 293  
294 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916142159-25.png?rev=1.1||alt="image-20220916142159-25.png" height="398" width="859"]]
315 +[[image:1657012573321-862.png]]
295 295  
296 296  (((
297 297  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
298 298  
320 +
299 299  
300 300  )))
301 301  
... ... @@ -312,6 +312,7 @@
312 312  [[image:image-20220705171836-8.png]]
313 313  
314 314  
337 +
315 315  (((
316 316  The set up page is (% style="color:#4f81bd" %)**System ~-~-> Cellular**
317 317  )))
... ... @@ -323,10 +323,11 @@
323 323  )))
324 324  
325 325  (((
326 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916141840-23.png?rev=1.1||alt="image-20220916141840-23.png" height="356" width="868"]]
349 +[[image:image-20220705171919-9.png]]
327 327  )))
328 328  
329 329  
353 +
330 330  == 3.5  Check Internet connection ==
331 331  
332 332  
... ... @@ -339,35 +339,30 @@
339 339  [[image:1657012821329-972.png]]
340 340  
341 341  
366 +
342 342  = 4.  Example: Configure as a LoRaWAN gateway =
343 343  
344 344  
345 345  LG308N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
346 346  
347 -
348 348  (((
349 349  [[image:1657012860422-990.png]]
350 -
351 -
352 352  )))
353 353  
354 354  This chapter describes how to use the LG308N to work with(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
355 355  
356 356  
379 +
357 357  == 4.1  Create a gateway in TTN V3 Server ==
358 358  
359 359  
360 360  (((
361 361  (% style="color:blue" %)**Step 1: Get a Unique gateway ID.**
362 -
363 -
364 364  )))
365 365  
366 366  (((
367 367  (((
368 368  Every LG308N has a unique gateway id. The ID can be found at LoRaWAN page:
369 -
370 -
371 371  )))
372 372  )))
373 373  
... ... @@ -383,10 +383,8 @@
383 383  
384 384  (% style="color:blue" %)**Step 2: Sign up a user account in TTN server**
385 385  
386 -
387 387  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
388 388  
389 -
390 390  [[image:1652422127479-258.png||height="346" width="738"]]
391 391  
392 392  
... ... @@ -393,7 +393,6 @@
393 393  
394 394  (% style="color:blue" %)**Step 3: Choose the TTNv3 Cluster Picker**
395 395  
396 -
397 397  (((
398 398  [[image:1652422142236-792.png||height="356" width="737"]]
399 399  
... ... @@ -408,14 +408,14 @@
408 408  * Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
409 409  * Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
410 410  
411 -(% style="color:blue" %)**Step 4: Create a Gateway**
412 412  
413 413  
429 +(% style="color:blue" %)**Step 4: Create a Gateway**
430 +
414 414  [[image:1652422440891-514.png||height="360" width="747"]]
415 415  
416 416  Click the Gateway icon and then click Add gateway.
417 417  
418 -
419 419  Open the following page:
420 420  
421 421   [[image:1652422470352-518.png||height="391" width="716"]]
... ... @@ -432,10 +432,10 @@
432 432  
433 433  After creating the gateway, you can see the gateway info, as below.
434 434  
435 -
436 436  [[image:1652422509034-682.png||height="299" width="739"]]
437 437  
438 438  
454 +
439 439  == 4.2  Configure LG308N to connect to TTN v3 ==
440 440  
441 441  
... ... @@ -448,7 +448,7 @@
448 448  )))
449 449  
450 450  (((
451 -Choose the right server provider and click (% style="color:blue" %)**Save&Apply.**
467 +Choose the right server provider and click (% style="color:blue" %)**Save&Apply**
452 452  
453 453  
454 454  )))
... ... @@ -461,17 +461,15 @@
461 461  
462 462  In the home page, we can see the LoRaWAN connection is ready now.
463 463  
480 +[[image:1657014479765-850.png]]
464 464  
465 -[[image:image-20220916171413-2.png]]
466 466  
467 -
468 -
469 469  In TTN v3 portal, we can also see the gateway is connected.
470 470  
471 -
472 472  [[image:1652422703020-955.png||height="343" width="730"]]
473 473  
474 474  
488 +
475 475  == 4.3  Configure frequency ==
476 476  
477 477  
... ... @@ -486,6 +486,7 @@
486 486   [[image:1652422763536-750.png||height="514" width="730"]]
487 487  
488 488  
503 +
489 489  == 4.4  Add a LoRaWAN End Device ==
490 490  
491 491  
... ... @@ -515,8 +515,6 @@
515 515  
516 516  
517 517  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
518 -
519 -
520 520  )))
521 521  
522 522  [[image:1652422840936-838.png]]
... ... @@ -523,7 +523,7 @@
523 523  
524 524  
525 525  (((
526 -(% style="color:red" %)**Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.**
539 +(% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
527 527  
528 528  
529 529  )))
... ... @@ -589,19 +589,22 @@
589 589  [[image:1652423277549-324.png||height="273" width="745"]]
590 590  
591 591  
605 +
592 592  = 5.  Web Configure Pages =
593 593  
608 +
594 594  == 5.1  Home ==
595 595  
596 596  
597 597  Shows the system running status.
598 598  
599 -
600 600  [[image:1657014949846-507.png]]
601 601  
602 602  
617 +
603 603  == 5.2  LoRa Settings ==
604 604  
620 +
605 605  === 5.2.1  LoRa ~-~-> LoRa ===
606 606  
607 607  
... ... @@ -618,16 +618,14 @@
618 618  
619 619  (((
620 620  After user choose the frequency plan, he can see the actually frequency in used by checking the page (% style="color:blue" %)**LogRead ~-~-> LoRa Log**
621 -
622 -
623 623  )))
624 624  
625 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LG308N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652422737399-529.png?rev=1.1||alt="1652422737399-529.png"]]
639 +[[image:1652423554776-574.png||height="380" width="740"]]
626 626  
627 -
628 628  (% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
629 629  
630 630  
644 +
631 631  === 5.2.2  LoRa ~-~-> ABP Decryption ===
632 632  
633 633  
... ... @@ -640,24 +640,23 @@
640 640  
641 641  
642 642  Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
643 -
644 -
645 645  )))
646 646  
647 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916114346-7.png?rev=1.1||alt="image-20220916114346-7.png" height="359" width="876"]]
659 +[[image:1652423628833-467.png||height="357" width="755"]]
648 648  
649 649  
662 +
650 650  == 5.3  LoRaWAN Settings ==
651 651  
665 +
652 652  === 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
653 653  
654 654  
655 -This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc.
669 +This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc
656 656  
671 +[[image:1652423628833-467.png||height="357" width="755"]]
657 657  
658 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916114929-8.png?rev=1.1||alt="image-20220916114929-8.png" height="707" width="860"]]
659 659  
660 -
661 661  (% style="color:red" %)**Note:**
662 662  
663 663  ~*: User can ignore the latitude and longitude settings here, LG308N will use the actually value from GPS module.
... ... @@ -667,27 +667,17 @@
667 667  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
668 668  
669 669  
670 -=== 5.3.2  LoRaWAN ~-~-> LoRaWAN ~-~- Basic Station ===
671 671  
684 +=== 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
672 672  
673 -[[image:image-20230406172421-1.png]]
674 674  
687 +[[image:1652428499323-384.png||height="275" width="723"]]
675 675  
676 -The basic station mode support **TTN/AWS/Chirpstack/ThingPark/Senet** Platform.
677 677  
678 -Instruction:
690 +(((
691 +Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
679 679  
680 - [[The Thing Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20TTN/#H3.A0GatewayRegistrationforBasicsStation]] 
681 681  
682 - [[AWS-IoT LoRaWAN Core>>url:http://wiki.dragino.com/xwiki/bin/view/Main/AWS%20IoT%20Core%20for%20LoRaWAN/]]
683 -
684 - [[Chirpstack>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H3.A0GatewayRegistrationforBasicsStation]]
685 -
686 - ThingPark
687 -
688 - [[Senet>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Connection%20to%20Senet/#H3.A0SemtechBasicStation]]
689 -
690 -(((
691 691  
692 692  )))
693 693  
... ... @@ -700,13 +700,12 @@
700 700  
701 701  (((
702 702  Instruction: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
703 -
704 -
705 705  )))
706 706  
707 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916115143-9.png?rev=1.1||alt="image-20220916115143-9.png" height="316" width="864"]](% style="display:none" %)
708 +[[image:1652428648903-878.png||height="266" width="731"]]
708 708  
709 709  
711 +
710 710  == 5.4  MQTT Settings ==
711 711  
712 712  
... ... @@ -722,29 +722,30 @@
722 722  [[image:1652428705046-212.png||height="417" width="733"]]
723 723  
724 724  
727 +
725 725  == 5.5  System ==
726 726  
730 +
727 727  === 5.5.1  System ~-~-> System Overview ===
728 728  
729 729  
730 730  Shows the system info:
731 731  
736 +[[image:1652428773760-580.png||height="408" width="728"]]
732 732  
733 -[[image:image-20220916173046-3.png||height="613" width="868"]]
734 734  
735 735  
736 736  === 5.5.2  System ~-~-> General ( login settings) ===
737 737  
738 738  
739 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916134411-11.png?rev=1.1||alt="image-20220916134411-11.png" height="499" width="865"]](% style="display:none" %)
743 +[[image:1652428861256-300.png||height="354" width="724"]]
740 740  
741 -
742 742  (((
743 743  (% style="color:#037691" %)**__System Password:__**
744 744  )))
745 745  
746 746  (((
747 -There are two login for DLOS8: (% style="color:#4f81bd" %)**root /dragino** (% style="color:black" %)or (% style="color:#4f81bd" %)**admin /dragino**. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
750 +There are two login for DLOS8: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
748 748  )))
749 749  
750 750  (((
... ... @@ -758,6 +758,7 @@
758 758  (((
759 759  (% style="color:#037691" %)**__Port forwarding: __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
760 760  
764 +
761 761  
762 762  )))
763 763  
... ... @@ -764,7 +764,7 @@
764 764  === 5.5.3  System ~-~-> Network ===
765 765  
766 766  
767 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916134642-12.png?rev=1.1||alt="image-20220916134642-12.png" height="411" width="873"]]
771 +[[image:1652429149053-824.png||height="467" width="725"]]
768 768  
769 769  
770 770  (((
... ... @@ -780,32 +780,35 @@
780 780  )))
781 781  
782 782  
787 +
783 783  === 5.5.4  System ~-~-> WiFi ===
784 784  
785 785  
786 786  LG308N WiFi Settings.
787 787  
788 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916134831-13.png?rev=1.1||alt="image-20220916134831-13.png" height="408" width="870"]]
793 +[[image:1652429430767-921.png||height="367" width="723"]]
789 789  
790 790  
796 +
791 791  === 5.5.5  System ~-~-> Cellular ===
792 792  
793 793  
794 794  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
795 795  
802 +[[image:1652429309615-825.png||height="320" width="732"]]
796 796  
797 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916135100-14.png?rev=1.1||alt="image-20220916135100-14.png" height="347" width="874"]](% style="display:none" %)
798 798  
799 -
800 800  (% style="color:red" %)**Note *: For LG308N which doesn't have the cellular module, this page will shows Cellular not detected.**
801 801  
802 802  
808 +
803 803  === 5.5.6  System ~-~-> Network Status ===
804 804  
805 805  
806 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916135207-15.png?rev=1.1||alt="image-20220916135207-15.png" height="599" width="882"]]
812 +[[image:1652429486609-208.png||height="415" width="728"]]
807 807  
808 808  
815 +
809 809  === 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
810 810  
811 811  
... ... @@ -817,18 +817,17 @@
817 817  
818 818  [[image:1652429537849-154.png||height="339" width="722"]]
819 819  
820 -
821 821  Please see this document for detail:
822 822  
823 823  [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
824 824  
825 825  
826 -R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Monitor & Remote Access Gateway.WebHome]]**
832 +R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Remote Access Gateway.WebHome]]**
827 827  
828 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140017-16.png?rev=1.1||alt="image-20220916140017-16.png" height="593" width="872"]]
834 +[[image:1652429624400-864.png||height="432" width="716"]]
829 829  
830 -(% style="display:none" %) (%%)
831 831  
837 +
832 832  === 5.5.8  System ~-~-> Firmware Upgrade ===
833 833  
834 834  
... ... @@ -850,29 +850,21 @@
850 850  
851 851  (((
852 852  (% style="color:green" %)**Web~-~-> System~-~-> Firmware Upgrade**
853 -
854 -
855 855  )))
856 856  
857 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140103-17.png?rev=1.1||alt="image-20220916140103-17.png" height="274" width="871"]]
861 +[[image:1652429711145-862.png||height="270" width="737"]]
858 858  
859 859  
860 860  (((
861 861  Select the required image and click (% style="color:blue" %)**Flash Image.**(%%) The image will be uploaded to the device, and then click (% style="color:blue" %)**Process Update** (%%)to upgrade.
862 -
863 -
864 864  )))
865 865  
866 866  (((
867 867  (% style="color:red" %)**NOTE**: (%%)You normally need to (% style="color:blue" %)**//uncheck//**(%%) the (% style="color:blue" %)**Preserve Settings**(%%) checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
868 -
869 -
870 870  )))
871 871  
872 872  (((
873 873  The system will automatically boot into the new firmware after upgrade.
874 -
875 -
876 876  )))
877 877  
878 878  [[image:1652429962190-224.png||height="358" width="729"]]
... ... @@ -888,110 +888,59 @@
888 888  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
889 889  
890 890  
889 +
891 891  === 5.5.9  System ~-~-> Reboot/Reset ===
892 892  
893 893  
894 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140312-18.png?rev=1.1||alt="image-20220916140312-18.png" height="274" width="873"]]
893 +[[image:1652430197132-330.png||height="256" width="724"]]
895 895  
896 896  (((
897 897  
897 +
898 +
898 898  )))
899 899  
900 900  === 5.5.10  System ~-~-> Package Maintain ===
901 901  
902 902  
903 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140421-19.png?rev=1.1||alt="image-20220916140421-19.png" height="687" width="868"]]
904 +[[image:1652430243826-126.png||height="289" width="723"]]
904 904  
905 -
906 906  Place to show what package has installed and possible to upgrade packages.
907 907  
908 908  
909 +
909 909  == 5.6  LogRead ==
910 910  
912 +
911 911  === 5.6.1  LogRead ~-~-> LoRa Log ===
912 912  
913 913  
914 914  Show the frequency for LoRa Radio and traffics.
915 915  
918 +[[image:1657069890320-513.png]]
916 916  
917 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140549-20.png?rev=1.1||alt="image-20220916140549-20.png" height="734" width="883"]]
918 918  
919 919  
922 +
920 920  === 5.6.2  LogRead ~-~-> System Log ===
921 921  
922 922  
923 923  Show the system log
924 924  
928 +[[image:1657069922599-794.png]]
925 925  
926 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140732-21.png?rev=1.1||alt="image-20220916140732-21.png" height="706" width="867"]]
927 927  
928 928  
929 929  = 6.  More features =
930 930  
931 -== 6.1 Packet Filtering ==
932 932  
935 +== 6.1  More instructions ==
933 933  
934 -Drop unwanted packets.
935 935  
936 -See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]
937 -
938 -
939 -== 6.2 Remote Access ==
940 -
941 -
942 -Remote Access Devices for management.
943 -
944 -Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access]]
945 -
946 -
947 -== 6.3 How to decode ABP LoRaWAN node ==
948 -
949 -
950 -Decode ABP:
951 -
952 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20~~-~~--%20LG308/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20---%20LG308/]]
953 -
954 -
955 -== 6.4 How to set data to MQTT broker ==
956 -
957 -
958 -Only support ABP LoRaWAN End Node
959 -
960 -Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]
961 -
962 -
963 -== 6.5 How the gateway connects to Chirpstack v3/v4 via gateway-bridge ==
964 -
965 -
966 -**For Chirpstack v3 Gateway-bridge**:
967 -
968 -The corresponding gateway firmware must be used :
969 -
970 -[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge~~-~~-build-v5.4.1679487778-20230322-2024/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge--build-v5.4.1679487778-20230322-2024/]]
971 -
972 -Chirpstack v3 via gateway-bridge Instruction: [[https:~~/~~/www.chirpstack.io/gateway-bridge/gateway/dragino/>>url:https://www.chirpstack.io/gateway-bridge/gateway/dragino/]]
973 -
974 -
975 -**For Chirpstack v4 Gateway-bridge**:
976 -
977 -The corresponding gateway firmware must be used :
978 -
979 -[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V4~~-~~-build-v5.4.1670655072-20221210-1452/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V4--build-v5.4.1670655072-20221210-1452/]]
980 -
981 -Chirpstack v4 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge]]
982 -
983 -
984 -(% style="color:red" %)**NOTE***(%%): Different chirpstack versions use different gateway-bridge configurations.
985 -
986 -After updating the Chirpstack gateway-bridge firmware, there is no need to re-download and install the Chirpstack gateway-bridge package
987 -
988 -
989 -== 6.6  More instructions ==
990 -
991 -
992 992  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
993 993  
994 994  
941 +
995 995  = 7.  Linux System =
996 996  
997 997  
... ... @@ -998,6 +998,7 @@
998 998  The LG308N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
999 999  
1000 1000  
948 +
1001 1001  == 7.1  SSH Access for Linux console ==
1002 1002  
1003 1003  
... ... @@ -1019,10 +1019,10 @@
1019 1019  
1020 1020  The “** (% style="background-color:yellow" %)logread -f"(%%)**command can be used to debug how system runs.
1021 1021  
1022 -
1023 1023  [[image:1657070133275-283.png]]
1024 1024  
1025 1025  
973 +
1026 1026  == 7.2  Edit and Transfer files ==
1027 1027  
1028 1028  
... ... @@ -1040,13 +1040,12 @@
1040 1040  
1041 1041  (((
1042 1042  Screenshot is as below:
1043 -
1044 -
1045 1045  )))
1046 1046  
1047 1047  [[image:1652431650755-450.png]]
1048 1048  
1049 1049  
996 +
1050 1050  == 7.3  File System ==
1051 1051  
1052 1052  
... ... @@ -1062,6 +1062,7 @@
1062 1062  )))
1063 1063  
1064 1064  
1012 +
1065 1065  == 7.4  Package maintenance system ==
1066 1066  
1067 1067  
... ... @@ -1117,6 +1117,7 @@
1117 1117  (((
1118 1118  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
1119 1119  
1068 +
1120 1120  
1121 1121  )))
1122 1122  
... ... @@ -1123,17 +1123,13 @@
1123 1123  = 8.  Upgrade Linux Firmware =
1124 1124  
1125 1125  
1126 -= 9.  OTA System Update =
1127 1127  
1076 += 9.  FAQ =
1128 1128  
1129 -LG308N supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
1130 1130  
1079 +== 9.1  How can I configure for a customized frequency band? ==
1131 1131  
1132 -= 10.  FAQ =
1133 1133  
1134 -== 10.1  How can I configure for a customized frequency band? ==
1135 -
1136 -
1137 1137  (((
1138 1138  See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
1139 1139  )))
... ... @@ -1140,17 +1140,20 @@
1140 1140  
1141 1141  (((
1142 1142  
1088 +
1089 +
1143 1143  )))
1144 1144  
1145 -== 10.2  Can I connect LG308N to LORIOT? ==
1092 +== 9.2  Can I connect LG308N to LORIOT? ==
1146 1146  
1147 1147  
1148 1148  Yes, the set up instruction is here: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
1149 1149  
1150 1150  
1151 -== 10.3  Can I make my own firmware for the gateway, where can I find the source code? ==
1152 1152  
1099 +== 9.3  Can I make my own firmware for the gateway, where can I find the source code? ==
1153 1153  
1101 +
1154 1154  (((
1155 1155  Yes, You can make your own firmware for the LG308N for branding purposes or to add customized applications.
1156 1156  )))
... ... @@ -1160,15 +1160,17 @@
1160 1160  )))
1161 1161  
1162 1162  
1163 -== 10.4  Can I use 868Mhz version for 915Mhz bands? ==
1164 1164  
1112 +== 9.4  Can I use 868Mhz version for 915Mhz bands? ==
1165 1165  
1114 +
1166 1166  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
1167 1167  
1168 1168  
1169 -== 10.5  Can I control the LEDs? ==
1170 1170  
1119 +== 9.5  Can I control the LEDs? ==
1171 1171  
1121 +
1172 1172  Except the PWR LED is controlled by +3v3 power directly. All other LEDs can be controlled by developer.
1173 1173  
1174 1174  
... ... @@ -1192,11 +1192,13 @@
1192 1192  OFF: echo 1 > /sys/class/gpio/gpio27/value
1193 1193  
1194 1194  
1195 -= 11.  Trouble Shooting =
1196 1196  
1197 -== 11.1  I get kernel error when install new package, how to fix? ==
1146 += 10.  Trouble Shooting =
1198 1198  
1199 1199  
1149 +== 10.1  I get kernel error when install new package, how to fix? ==
1150 +
1151 +
1200 1200  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
1201 1201  
1202 1202  (% style="background-color:yellow" %)root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
... ... @@ -1218,9 +1218,10 @@
1218 1218  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
1219 1219  
1220 1220  
1221 -== 11.2  How to recover the LG308N if the firmware crashes ==
1222 1222  
1174 +== 10.2  How to recover the LG308N if the firmware crashes ==
1223 1223  
1176 +
1224 1224  (((
1225 1225  Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
1226 1226  )))
... ... @@ -1227,14 +1227,15 @@
1227 1227  
1228 1228  (((
1229 1229  
1183 +
1184 +
1230 1230  )))
1231 1231  
1232 -== 11.3  I configured LG308N for WiFi access and lost its IP. What to do now? ==
1187 +== 10.3  I configured LG308N for WiFi access and lost its IP. What to do now? ==
1233 1233  
1234 1234  
1235 1235  [[image:1657074078183-336.png]]
1236 1236  
1237 -
1238 1238  (((
1239 1239  (((
1240 1240  The LG308N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access LG308N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
... ... @@ -1257,25 +1257,21 @@
1257 1257  
1258 1258  (((
1259 1259  2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
1260 -
1261 -
1262 1262  )))
1263 1263  
1264 1264  (((
1265 1265  As below photo:
1266 -
1267 -
1268 1268  )))
1269 1269  
1270 1270  [[image:1652435256286-879.png]]
1271 1271  
1272 -
1273 1273  3. In PC, use 172.31.255.254 to access LG308N via Web or Console.
1274 1274  
1275 1275  
1276 -= 12.  Order Info =
1277 1277  
1226 += 11.  Order Info =
1278 1278  
1228 +
1279 1279  **//PART:(% style="color:blue" %) DLOS8N-XXX-YYY//: (%%)**(% style="color:blue" %)
1280 1280  
1281 1281  (% style="color:blue" %)**//XXX~://**(%%)**// Frequency Band//**
... ... @@ -1295,8 +1295,9 @@
1295 1295  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1296 1296  
1297 1297  
1298 -= 13.  Packing Info =
1299 1299  
1249 += 12.  Packing Info =
1250 +
1300 1300  (((
1301 1301  
1302 1302  
... ... @@ -1320,9 +1320,10 @@
1320 1320  * Weight: 2.5kg
1321 1321  
1322 1322  
1323 -= 14.  Support =
1324 1324  
1325 1325  
1276 += 13.  Support =
1277 +
1326 1326  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1327 1327  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
1328 1328  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
... ... @@ -1329,9 +1329,10 @@
1329 1329  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to: [[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1330 1330  
1331 1331  
1332 -= 15.  Reference =
1333 1333  
1334 1334  
1286 += 14.  Reference =
1287 +
1335 1335  * Source code for LG08 LoRa Gateway: [[https:~~/~~/github.com/dragino/openwrt_lede-18.06>>url:https://github.com/dragino/openwrt_lede-18.06]]
1336 1336  
1337 1337  * OpenWrt official Wiki: [[http:~~/~~/www.openwrt.org/>>url:http://www.openwrt.org/]]
... ... @@ -1339,5 +1339,3 @@
1339 1339  * Firmware: [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308N-OLG308N/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]]
1340 1340  
1341 1341  * Hardware Source code: [[https:~~/~~/github.com/dragino/motherboard-hardware/tree/master/LG308N>>url:https://github.com/dragino/motherboard-hardware/tree/master/LG308]]
1342 -
1343 -
1663317843420-717.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -86.8 KB
Content
image-20220916164504-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -42.4 KB
Content
image-20220916171413-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -143.3 KB
Content
image-20220916173046-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -142.9 KB
Content
image-20221101103113-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230406173729-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -85.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0