Skip to Content
Last modified by Kilight Cao on 2025/02/07 08:57
From version 127.5
edited by Xiaoling
on 2022/07/29 15:07
Change comment: There is no comment for this version
To version 133.2
edited by Xiaoling
on 2022/12/16 09:58
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -21,7 +21,6 @@
21 21  
22 22  = 1.  Introduction =
23 23  
24 -
25 25  == 1.1  What is the LG308N ==
26 26  
27 27  
... ... @@ -50,7 +50,6 @@
50 50  [[image:1657010949218-224.png]]
51 51  
52 52  
53 -
54 54  == 1.2  Specifications ==
55 55  
56 56  
... ... @@ -108,6 +108,8 @@
108 108  * Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
109 109  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
110 110  
109 +
110 +
111 111  == 1.3  Features ==
112 112  
113 113  
... ... @@ -117,13 +117,14 @@
117 117  * LoRaWAN Gateway
118 118  * 10 programmable parallel demodulation paths
119 119  
120 -== 1.4  Hardware System Structure ==
121 121  
122 122  
123 -[[image:1657011152828-178.png]]
122 +== 1.4  Hardware System Structure ==
124 124  
125 125  
125 +[[image:image-20221101103113-1.png]]
126 126  
127 +
127 127  == 1.5  LG308N Applications ==
128 128  
129 129  
... ... @@ -130,7 +130,6 @@
130 130  [[image:1657011208596-209.png]]
131 131  
132 132  
133 -
134 134  == 1.6  LED Indicators ==
135 135  
136 136  
... ... @@ -151,12 +151,22 @@
151 151  )))
152 152  
153 153  
154 -(((
155 -(((
156 -
157 -)))
158 -)))
154 +== 1.7 Button Instruction ==
159 159  
156 +
157 +LG308N has a black toggle button, which is:
158 +
159 +
160 +(% style="color:blue" %)**//➢ //Long press 4-5s:                     **(%%)the gateway will reload the Network and Initialize wifi configuration
161 +
162 + **LED status: ** SYS LED will BLINKING RED Until the reload is finished.
163 +
164 +
165 +(% style="color:blue" %)**➢ Long press more than 30s:    **(%%)the gateway will restart and restore factory settings.
166 +
167 + **LED status: ** When the user releases the button, the LED will TURN OFF.
168 +
169 +
160 160  = 2.  Access and Configure LG308N =
161 161  
162 162  
... ... @@ -163,17 +163,17 @@
163 163  The LG308N is configured as a WiFi Access Point by default. User can access and configure the LG308N after connecting to its WiFi network, or via its Ethernet port.
164 164  
165 165  
166 -
167 167  == 2.1  Find IP address of LG308N ==
168 168  
169 -
170 170  === 2.1.1  Connect via WiFi ===
171 171  
180 +
172 172  [[image:1657011715859-829.png]]
173 173  
174 174  
175 175  At the first boot of LG308N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
176 176  
186 +
177 177  (% style="color:red" %)**Note: In latest version firmware, it has been password protected and the password is:  **(% style="background-color:yellow" %)**dragino+dragino**
178 178  
179 179  
... ... @@ -183,7 +183,6 @@
183 183  (((
184 184  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LG308N has the default IP (% style="color:green" %)**10.130.1.1**
185 185  
186 -
187 187  
188 188  )))
189 189  
... ... @@ -192,6 +192,7 @@
192 192  
193 193  [[image:1657011966663-484.png]]
194 194  
204 +
195 195  (((
196 196  Alternatively, connect the LG308N** __WAN port__** to your router and LG308N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG308N. You can also use this IP to connect.
197 197  )))
... ... @@ -206,12 +206,12 @@
206 206  
207 207  [[image:1657012061799-674.png]]
208 208  
219 +
209 209  (((
210 210  The LG308N __**LAN port**__ is configured as DHCP router by default, user can connect the PC to LAN port and set PC to DHCP mode, it will get IP from LAN port and be able to access to the device. The default IP in LAN port is 10.130.1.1
211 211  )))
212 212  
213 213  
214 -
215 215  === 2.1.4  Connect WiFi with DHCP IP from router ===
216 216  
217 217  
... ... @@ -221,7 +221,6 @@
221 221  If the LG308N already connect to the router via WiFi, use can use the WiFi IP to connect to LG308N.
222 222  
223 223  
224 -
225 225  === 2.1.5  Connect via LAN port by fall back ip ===
226 226  
227 227  
... ... @@ -228,7 +228,6 @@
228 228  The **LAN port** also has a [[fall back ip address>>path:#fallback_ip]] for access if user doesn't connect to uplink router.
229 229  
230 230  
231 -
232 232  == 2.2  Access Configure Web UI ==
233 233  
234 234  
... ... @@ -240,7 +240,7 @@
240 240  
241 241  or
242 242  
243 -http:~/~/IP_ADDRESS or [[http:~~/~~/ IP_ADDRESS:8000>>url:http://192.168.1.xx:8000]]
251 +http:~/~/IP_ADDRESS or http:~/~/ IP_ADDRESS:8000
244 244  
245 245  
246 246  You will see the login interface of DLOS8N as shown below.
... ... @@ -251,13 +251,12 @@
251 251  
252 252  (% style="color:#4f81bd" %)**Password:   dragino**
253 253  
262 +
254 254  [[image:1652414287022-223.png]]
255 255  
256 256  
257 -
258 258  = 3.  Typical Network Setup =
259 259  
260 -
261 261  == 3.1  Overview ==
262 262  
263 263  
... ... @@ -270,11 +270,14 @@
270 270  * **WiFi AP Mode**
271 271  * **Cellular Mode**
272 272  
280 +
281 +
273 273  == 3.2  Use WAN port to access Internet ==
274 274  
275 275  
276 276  By default, the LG308N is set to use the WAN port to connect to an upstream network. When you connect the LG308N's WAN port to an upstream router, LG308N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
277 277  
287 +
278 278  [[image:1657012559318-672.png]]
279 279  
280 280  
... ... @@ -288,12 +288,11 @@
288 288  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
289 289  )))
290 290  
291 -[[image:1657012573321-862.png]]
301 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916142159-25.png?rev=1.1||alt="image-20220916142159-25.png" height="398" width="859"]]
292 292  
293 293  (((
294 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply** to connect.
304 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
295 295  
296 -
297 297  
298 298  )))
299 299  
... ... @@ -310,7 +310,6 @@
310 310  [[image:image-20220705171836-8.png]]
311 311  
312 312  
313 -
314 314  (((
315 315  The set up page is (% style="color:#4f81bd" %)**System ~-~-> Cellular**
316 316  )))
... ... @@ -322,11 +322,10 @@
322 322  )))
323 323  
324 324  (((
325 -[[image:image-20220705171919-9.png]]
333 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916141840-23.png?rev=1.1||alt="image-20220916141840-23.png" height="356" width="868"]]
326 326  )))
327 327  
328 328  
329 -
330 330  == 3.5  Check Internet connection ==
331 331  
332 332  
... ... @@ -339,14 +339,16 @@
339 339  [[image:1657012821329-972.png]]
340 340  
341 341  
342 -
343 343  = 4.  Example: Configure as a LoRaWAN gateway =
344 344  
345 345  
346 346  LG308N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
347 347  
354 +
348 348  (((
349 349  [[image:1657012860422-990.png]]
357 +
358 +
350 350  )))
351 351  
352 352  This chapter describes how to use the LG308N to work with(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
... ... @@ -358,11 +358,15 @@
358 358  
359 359  (((
360 360  (% style="color:blue" %)**Step 1: Get a Unique gateway ID.**
370 +
371 +
361 361  )))
362 362  
363 363  (((
364 364  (((
365 365  Every LG308N has a unique gateway id. The ID can be found at LoRaWAN page:
377 +
378 +
366 366  )))
367 367  )))
368 368  
... ... @@ -378,8 +378,10 @@
378 378  
379 379  (% style="color:blue" %)**Step 2: Sign up a user account in TTN server**
380 380  
394 +
381 381  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
382 382  
397 +
383 383  [[image:1652422127479-258.png||height="346" width="738"]]
384 384  
385 385  
... ... @@ -386,8 +386,11 @@
386 386  
387 387  (% style="color:blue" %)**Step 3: Choose the TTNv3 Cluster Picker**
388 388  
404 +
389 389  (((
390 390  [[image:1652422142236-792.png||height="356" width="737"]]
407 +
408 +
391 391  )))
392 392  
393 393  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
... ... @@ -400,10 +400,12 @@
400 400  
401 401  (% style="color:blue" %)**Step 4: Create a Gateway**
402 402  
421 +
403 403  [[image:1652422440891-514.png||height="360" width="747"]]
404 404  
405 405  Click the Gateway icon and then click Add gateway.
406 406  
426 +
407 407  Open the following page:
408 408  
409 409   [[image:1652422470352-518.png||height="391" width="716"]]
... ... @@ -420,6 +420,7 @@
420 420  
421 421  After creating the gateway, you can see the gateway info, as below.
422 422  
443 +
423 423  [[image:1652422509034-682.png||height="299" width="739"]]
424 424  
425 425  
... ... @@ -436,7 +436,7 @@
436 436  )))
437 437  
438 438  (((
439 -Choose the right server provider and click (% style="color:blue" %)**Save&Apply**
460 +Choose the right server provider and click (% style="color:blue" %)**Save&Apply.**
440 440  
441 441  
442 442  )))
... ... @@ -449,15 +449,17 @@
449 449  
450 450  In the home page, we can see the LoRaWAN connection is ready now.
451 451  
452 -[[image:1657014479765-850.png]]
453 453  
474 +[[image:image-20220916171413-2.png]]
454 454  
476 +
477 +
455 455  In TTN v3 portal, we can also see the gateway is connected.
456 456  
480 +
457 457  [[image:1652422703020-955.png||height="343" width="730"]]
458 458  
459 459  
460 -
461 461  == 4.3  Configure frequency ==
462 462  
463 463  
... ... @@ -502,6 +502,8 @@
502 502  
503 503  
504 504  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
528 +
529 +
505 505  )))
506 506  
507 507  [[image:1652422840936-838.png]]
... ... @@ -508,7 +508,7 @@
508 508  
509 509  
510 510  (((
511 -(% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
536 +(% style="color:red" %)**Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.**
512 512  
513 513  
514 514  )))
... ... @@ -574,22 +574,19 @@
574 574  [[image:1652423277549-324.png||height="273" width="745"]]
575 575  
576 576  
577 -
578 578  = 5.  Web Configure Pages =
579 579  
580 -
581 581  == 5.1  Home ==
582 582  
583 583  
584 584  Shows the system running status.
585 585  
609 +
586 586  [[image:1657014949846-507.png]]
587 587  
588 588  
589 -
590 590  == 5.2  LoRa Settings ==
591 591  
592 -
593 593  === 5.2.1  LoRa ~-~-> LoRa ===
594 594  
595 595  
... ... @@ -606,14 +606,16 @@
606 606  
607 607  (((
608 608  After user choose the frequency plan, he can see the actually frequency in used by checking the page (% style="color:blue" %)**LogRead ~-~-> LoRa Log**
631 +
632 +
609 609  )))
610 610  
611 -[[image:1652423554776-574.png||height="380" width="740"]]
635 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LG308N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652422737399-529.png?rev=1.1||alt="1652422737399-529.png"]]
612 612  
637 +
613 613  (% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
614 614  
615 615  
616 -
617 617  === 5.2.2  LoRa ~-~-> ABP Decryption ===
618 618  
619 619  
... ... @@ -626,23 +626,25 @@
626 626  
627 627  
628 628  Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
653 +
654 +
629 629  )))
630 630  
631 -[[image:1652423628833-467.png||height="357" width="755"]]
657 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916114346-7.png?rev=1.1||alt="image-20220916114346-7.png" height="359" width="876"]]
632 632  
633 633  
634 634  
635 635  == 5.3  LoRaWAN Settings ==
636 636  
637 -
638 638  === 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
639 639  
640 640  
641 -This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc
666 +This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc.
642 642  
643 -[[image:1652423628833-467.png||height="357" width="755"]]
644 644  
669 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916114929-8.png?rev=1.1||alt="image-20220916114929-8.png" height="707" width="860"]]
645 645  
671 +
646 646  (% style="color:red" %)**Note:**
647 647  
648 648  ~*: User can ignore the latitude and longitude settings here, LG308N will use the actually value from GPS module.
... ... @@ -652,7 +652,6 @@
652 652  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
653 653  
654 654  
655 -
656 656  === 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
657 657  
658 658  
... ... @@ -662,7 +662,6 @@
662 662  (((
663 663  Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
664 664  
665 -
666 666  
667 667  )))
668 668  
... ... @@ -675,12 +675,13 @@
675 675  
676 676  (((
677 677  Instruction: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
702 +
703 +
678 678  )))
679 679  
680 -[[image:1652428648903-878.png||height="266" width="731"]]
706 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916115143-9.png?rev=1.1||alt="image-20220916115143-9.png" height="316" width="864"]](% style="display:none" %)
681 681  
682 682  
683 -
684 684  == 5.4  MQTT Settings ==
685 685  
686 686  
... ... @@ -696,30 +696,29 @@
696 696  [[image:1652428705046-212.png||height="417" width="733"]]
697 697  
698 698  
699 -
700 700  == 5.5  System ==
701 701  
702 -
703 703  === 5.5.1  System ~-~-> System Overview ===
704 704  
705 705  
706 706  Shows the system info:
707 707  
708 -[[image:1652428773760-580.png||height="408" width="728"]]
709 709  
732 +[[image:image-20220916173046-3.png||height="613" width="868"]]
710 710  
711 711  
712 712  === 5.5.2  System ~-~-> General ( login settings) ===
713 713  
714 714  
715 -[[image:1652428861256-300.png||height="354" width="724"]]
738 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916134411-11.png?rev=1.1||alt="image-20220916134411-11.png" height="499" width="865"]](% style="display:none" %)
716 716  
740 +
717 717  (((
718 718  (% style="color:#037691" %)**__System Password:__**
719 719  )))
720 720  
721 721  (((
722 -There are two login for DLOS8: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
746 +There are two login for DLOS8: (% style="color:#4f81bd" %)**root /dragino** (% style="color:black" %)or (% style="color:#4f81bd" %)**admin /dragino**. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
723 723  )))
724 724  
725 725  (((
... ... @@ -733,14 +733,15 @@
733 733  (((
734 734  (% style="color:#037691" %)**__Port forwarding: __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
735 735  
736 -
737 737  
738 738  )))
739 739  
740 740  === 5.5.3  System ~-~-> Network ===
741 741  
742 -[[image:1652429149053-824.png||height="467" width="725"]]
743 743  
766 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916134642-12.png?rev=1.1||alt="image-20220916134642-12.png" height="411" width="873"]]
767 +
768 +
744 744  (((
745 745  (% style="color:#037691" %)**__LAN Settings:  __**(%%)When the LG308N has the AP enable, LAN settings specify the network info for LG308N's own network.
746 746  )))
... ... @@ -754,34 +754,35 @@
754 754  )))
755 755  
756 756  
757 -
758 758  === 5.5.4  System ~-~-> WiFi ===
759 759  
760 760  
761 761  LG308N WiFi Settings.
762 762  
763 -[[image:1652429430767-921.png||height="367" width="723"]]
787 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916134831-13.png?rev=1.1||alt="image-20220916134831-13.png" height="408" width="870"]]
764 764  
765 765  
766 -
767 767  === 5.5.5  System ~-~-> Cellular ===
768 768  
792 +
769 769  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
770 770  
771 -[[image:1652429309615-825.png||height="320" width="732"]]
772 772  
773 -(% style="color:red" %)Note *: For LG308N which doesn't have the cellular module, this page will shows Cellular not detected.
796 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916135100-14.png?rev=1.1||alt="image-20220916135100-14.png" height="347" width="874"]](% style="display:none" %)
774 774  
775 775  
799 +(% style="color:red" %)**Note *: For LG308N which doesn't have the cellular module, this page will shows Cellular not detected.**
776 776  
801 +
777 777  === 5.5.6  System ~-~-> Network Status ===
778 778  
779 -[[image:1652429486609-208.png||height="415" width="728"]]
780 780  
805 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916135207-15.png?rev=1.1||alt="image-20220916135207-15.png" height="599" width="882"]]
781 781  
782 782  
783 783  === 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
784 784  
810 +
785 785  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
786 786  
787 787  [[image:1652429518191-846.png||height="332" width="733"]]
... ... @@ -790,19 +790,21 @@
790 790  
791 791  [[image:1652429537849-154.png||height="339" width="722"]]
792 792  
819 +
793 793  Please see this document for detail:
794 794  
795 795  [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
796 796  
797 797  
798 -R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Remote Access Gateway.WebHome]]**
825 +R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Monitor & Remote Access Gateway.WebHome]]**
799 799  
800 -[[image:1652429624400-864.png||height="432" width="716"]]
827 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140017-16.png?rev=1.1||alt="image-20220916140017-16.png" height="593" width="872"]]
801 801  
829 +(% style="display:none" %) (%%)
802 802  
803 -
804 804  === 5.5.8  System ~-~-> Firmware Upgrade ===
805 805  
833 +
806 806  We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
807 807  
808 808  * **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
... ... @@ -816,30 +816,39 @@
816 816  
817 817  
818 818  (((
819 -The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
847 +The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(%%)is the upgrade Image. There are different methods to upgrade, as below.
820 820  )))
821 821  
822 822  (((
823 823  (% style="color:green" %)**Web~-~-> System~-~-> Firmware Upgrade**
852 +
853 +
824 824  )))
825 825  
826 -[[image:1652429711145-862.png||height="270" width="737"]]
856 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140103-17.png?rev=1.1||alt="image-20220916140103-17.png" height="274" width="871"]]
827 827  
828 828  
829 829  (((
830 -Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
860 +Select the required image and click (% style="color:blue" %)**Flash Image.**(%%) The image will be uploaded to the device, and then click (% style="color:blue" %)**Process Update** (%%)to upgrade.
861 +
862 +
831 831  )))
832 832  
833 833  (((
834 -(% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
866 +(% style="color:red" %)**NOTE**: (%%)You normally need to (% style="color:blue" %)**//uncheck//**(%%) the (% style="color:blue" %)**Preserve Settings**(%%) checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
867 +
868 +
835 835  )))
836 836  
837 837  (((
838 838  The system will automatically boot into the new firmware after upgrade.
873 +
874 +
839 839  )))
840 840  
841 841  [[image:1652429962190-224.png||height="358" width="729"]]
842 842  
879 +
843 843  (% style="color:red" %)**NOTE***(%%): User can also upgrade firmware via Linux console
844 844  
845 845  SCP the firmware to the system(% style="color:green" %)**/var**(%%)** **directory and then run
... ... @@ -850,42 +850,42 @@
850 850  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
851 851  
852 852  
853 -
854 854  === 5.5.9  System ~-~-> Reboot/Reset ===
855 855  
856 -[[image:1652430197132-330.png||height="256" width="724"]]
857 857  
893 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140312-18.png?rev=1.1||alt="image-20220916140312-18.png" height="274" width="873"]]
894 +
858 858  (((
859 859  
860 -
861 -
862 862  )))
863 863  
864 864  === 5.5.10  System ~-~-> Package Maintain ===
865 865  
866 -[[image:1652430243826-126.png||height="289" width="723"]]
867 867  
868 -Place to show what package has installed and possible to upgrade packages.
902 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140421-19.png?rev=1.1||alt="image-20220916140421-19.png" height="687" width="868"]]
869 869  
870 870  
905 +Place to show what package has installed and possible to upgrade packages.
871 871  
907 +
872 872  == 5.6  LogRead ==
873 873  
874 874  === 5.6.1  LogRead ~-~-> LoRa Log ===
875 875  
912 +
876 876  Show the frequency for LoRa Radio and traffics.
877 877  
878 -[[image:1657069890320-513.png]]
879 879  
916 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140549-20.png?rev=1.1||alt="image-20220916140549-20.png" height="734" width="883"]]
880 880  
881 881  
882 -
883 883  === 5.6.2  LogRead ~-~-> System Log ===
884 884  
921 +
885 885  Show the system log
886 886  
887 -[[image:1657069922599-794.png]]
888 888  
925 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140732-21.png?rev=1.1||alt="image-20220916140732-21.png" height="706" width="867"]]
889 889  
890 890  
891 891  = 6.  More features =
... ... @@ -892,17 +892,19 @@
892 892  
893 893  == 6.1  More instructions ==
894 894  
932 +
895 895  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
896 896  
897 897  
898 -
899 899  = 7.  Linux System =
900 900  
938 +
901 901  The LG308N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
902 902  
903 903  
904 904  == 7.1  SSH Access for Linux console ==
905 905  
944 +
906 906  User can access the Linux console via the SSH protocol. Make sure your PC and the LG308N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
907 907  
908 908  IP address:  IP address of LG308N
... ... @@ -919,14 +919,15 @@
919 919  [[image:1652431588565-830.png]]
920 920  
921 921  
922 -The “(% class="mark" %)**logread -f**(%%)” command can be used to debug how system runs.
961 +The “** (% style="background-color:yellow" %)logread -f"(%%)**command can be used to debug how system runs.
923 923  
963 +
924 924  [[image:1657070133275-283.png]]
925 925  
926 926  
927 -
928 928  == 7.2  Edit and Transfer files ==
929 929  
969 +
930 930  (((
931 931  The LG308N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
932 932  )))
... ... @@ -941,6 +941,8 @@
941 941  
942 942  (((
943 943  Screenshot is as below:
984 +
985 +
944 944  )))
945 945  
946 946  [[image:1652431650755-450.png]]
... ... @@ -948,6 +948,7 @@
948 948  
949 949  == 7.3  File System ==
950 950  
993 +
951 951  (((
952 952  (((
953 953  The LG308N has a 16MB flash and a 64MB RAM. The /var and /tmp directory are in the RAM, contents stored in /tmp and /var will be erased after reboot the device. Other directories are in the flash and will keep after reboot.
... ... @@ -960,11 +960,11 @@
960 960  )))
961 961  
962 962  
963 -
964 964  == 7.4  Package maintenance system ==
965 965  
966 -LG308N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
967 967  
1009 +LG308N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure LG308N to use **//iperf //**.
1010 +
968 968  (((
969 969  Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
970 970  )))
... ... @@ -1015,7 +1015,6 @@
1015 1015  (((
1016 1016  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
1017 1017  
1018 -
1019 1019  
1020 1020  )))
1021 1021  
... ... @@ -1027,6 +1027,7 @@
1027 1027  
1028 1028  == 9.1  How can I configure for a customized frequency band? ==
1029 1029  
1072 +
1030 1030  (((
1031 1031  See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
1032 1032  )))
... ... @@ -1037,11 +1037,13 @@
1037 1037  
1038 1038  == 9.2  Can I connect LG308N to LORIOT? ==
1039 1039  
1083 +
1040 1040  Yes, the set up instruction is here: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
1041 1041  
1042 1042  
1043 1043  == 9.3  Can I make my own firmware for the gateway, where can I find the source code? ==
1044 1044  
1089 +
1045 1045  (((
1046 1046  Yes, You can make your own firmware for the LG308N for branding purposes or to add customized applications.
1047 1047  )))
... ... @@ -1053,11 +1053,13 @@
1053 1053  
1054 1054  == 9.4  Can I use 868Mhz version for 915Mhz bands? ==
1055 1055  
1101 +
1056 1056  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
1057 1057  
1058 1058  
1059 1059  == 9.5  Can I control the LEDs? ==
1060 1060  
1107 +
1061 1061  Except the PWR LED is controlled by +3v3 power directly. All other LEDs can be controlled by developer.
1062 1062  
1063 1063  
... ... @@ -1081,11 +1081,11 @@
1081 1081  OFF: echo 1 > /sys/class/gpio/gpio27/value
1082 1082  
1083 1083  
1084 -
1085 1085  = 10.  Trouble Shooting =
1086 1086  
1087 1087  == 10.1  I get kernel error when install new package, how to fix? ==
1088 1088  
1135 +
1089 1089  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
1090 1090  
1091 1091  (% style="background-color:yellow" %)root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
... ... @@ -1107,9 +1107,9 @@
1107 1107  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
1108 1108  
1109 1109  
1110 -
1111 1111  == 10.2  How to recover the LG308N if the firmware crashes ==
1112 1112  
1159 +
1113 1113  (((
1114 1114  Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
1115 1115  )))
... ... @@ -1120,8 +1120,10 @@
1120 1120  
1121 1121  == 10.3  I configured LG308N for WiFi access and lost its IP. What to do now? ==
1122 1122  
1170 +
1123 1123  [[image:1657074078183-336.png]]
1124 1124  
1173 +
1125 1125  (((
1126 1126  (((
1127 1127  The LG308N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access LG308N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
... ... @@ -1128,13 +1128,14 @@
1128 1128  )))
1129 1129  )))
1130 1130  
1180 +
1131 1131  (((
1132 -(% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
1182 +(% style="color:red" %)**Note: fallback IP can be disabled in the WAN and DHCP page.**
1133 1133  )))
1134 1134  
1135 1135  
1136 1136  (((
1137 -Steps to connect via fall back IP:
1187 +**Steps to connect via fall back IP:**
1138 1138  )))
1139 1139  
1140 1140  (((
... ... @@ -1143,24 +1143,28 @@
1143 1143  
1144 1144  (((
1145 1145  2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
1196 +
1197 +
1146 1146  )))
1147 1147  
1148 1148  (((
1149 1149  As below photo:
1202 +
1203 +
1150 1150  )))
1151 1151  
1152 1152  [[image:1652435256286-879.png]]
1153 1153  
1208 +
1154 1154  3. In PC, use 172.31.255.254 to access LG308N via Web or Console.
1155 1155  
1156 1156  
1157 -
1158 1158  = 11.  Order Info =
1159 1159  
1160 1160  
1161 -(% style="color:#4f81bd" %)**//PART: DLOS8N-XXX-YYY//: **
1215 +**//PART:(% style="color:blue" %) DLOS8N-XXX-YYY//: (%%)**(% style="color:blue" %)
1162 1162  
1163 -(% style="color:#4f81bd" %)**//XXX: Frequency Band//**
1217 +(% style="color:blue" %)**//XXX~://**(%%)**// Frequency Band//**
1164 1164  
1165 1165  * (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1166 1166  * (% style="color:red" %)** 915**(% style="color:black" %):  valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
... ... @@ -1167,7 +1167,7 @@
1167 1167  
1168 1168  (% style="color:#4f81bd" %)
1169 1169  
1170 -(% style="color:#4f81bd" %)**//YYY: 4G Cellular Option//**
1224 +(% style="color:blue" %)**//YYY~://**(%%)**// 4G Cellular Option//**
1171 1171  
1172 1172  * (% style="color:red" %)** EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1173 1173  * (% style="color:red" %)** EC25-A**(% style="color:black" %):  North America/ Rogers/AT&T/T-Mobile.
... ... @@ -1201,15 +1201,21 @@
1201 1201  * Package Size: 49 x 19.5 x x 19Package Size: 4912 cm
1202 1202  * Weight: 2.5kg
1203 1203  
1258 +
1259 +
1204 1204  = 13.  Support =
1205 1205  
1262 +
1206 1206  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1207 1207  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
1208 1208  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
1209 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1266 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to: [[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1210 1210  
1268 +
1269 +
1211 1211  = 14.  Reference =
1212 1212  
1272 +
1213 1213  * Source code for LG08 LoRa Gateway: [[https:~~/~~/github.com/dragino/openwrt_lede-18.06>>url:https://github.com/dragino/openwrt_lede-18.06]]
1214 1214  
1215 1215  * OpenWrt official Wiki: [[http:~~/~~/www.openwrt.org/>>url:http://www.openwrt.org/]]
... ... @@ -1217,3 +1217,5 @@
1217 1217  * Firmware: [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308N-OLG308N/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]]
1218 1218  
1219 1219  * Hardware Source code: [[https:~~/~~/github.com/dragino/motherboard-hardware/tree/master/LG308N>>url:https://github.com/dragino/motherboard-hardware/tree/master/LG308]]
1280 +
1281 +
1663317843420-717.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +86.8 KB
Content
image-20220916164504-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +42.4 KB
Content
image-20220916171413-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +143.3 KB
Content
image-20220916173046-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +142.9 KB
Content
image-20221101103113-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +55.8 KB
Content