Last modified by Kilight Cao on 2025/02/07 08:57
<
From version < 127.2 >
edited by Xiaoling
on 2022/07/29 14:37
To version < 118.5 >
edited by Xiaoling
on 2022/07/05 18:07
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -6,7 +6,6 @@
6 6  
7 7  **Table of Contents：**
8 8  
9 -{{toc/}}
10 10  
11 11  
12 12  
... ... @@ -18,10 +18,8 @@
18 18  
19 19  
20 20  
21 -
22 22  = 1.  Introduction =
23 23  
24 -
25 25  == 1.1  What is the LG308N ==
26 26  
27 27  
... ... @@ -50,11 +50,10 @@
50 50  [[image:1657010949218-224.png]]
51 51  
52 52  
53 -
54 54  == 1.2  Specifications ==
55 55  
56 56  
57 -(% style="color:#037691" %)**Hardware System:**
53 +**Hardware System:**
58 58  
59 59  (((
60 60   Linux Part:
... ... @@ -64,10 +64,8 @@
64 64  * 64MB RAM
65 65  * 16MB Flash
66 66  
63 +**Interface:**
67 67  
68 -
69 -(% style="color:#037691" %)**Interface:**
70 -
71 71  * 10M/100M RJ45 Ports x 2
72 72  * WiFi : 802.11 b/g/n
73 73  * LoRaWAN Wireless
... ... @@ -77,10 +77,8 @@
77 77  * Mini-PCI E connector x 1
78 78  * SX1302 + 2 x SX1250
79 79  
74 +**WiFi Spec:**
80 80  
81 -
82 -(% style="color:#037691" %)**WiFi Spec:**
83 -
84 84  * IEEE 802.11 b/g/n
85 85  * Frequency Band: 2.4 ~~ 2.462GHz
86 86  * Tx power:
... ... @@ -92,10 +92,8 @@
92 92  ** 11g 54M : -71dbm
93 93  ** 11n 20M : -67dbm
94 94  
87 +**LoRa Spec:**
95 95  
96 -
97 -(% style="color:#037691" %)**LoRa Spec:**
98 -
99 99  * Up to -142.5 dBm sensitivity with SX1250 Tx/Rx front-end
100 100  * 70 dB CW interferer rejection at 1 MHz offset
101 101  * Able to operate with negative SNR, CCR up to 9dB
... ... @@ -105,10 +105,8 @@
105 105  * Dynamic data-rate (DDR) adaptation
106 106  * True antenna diversity or simultaneous dual-band operation
107 107  
98 +**Cellular 4G LTE (optional):**
108 108  
109 -
110 -(% style="color:#037691" %)**Cellular 4G LTE (optional):**
111 -
112 112  * Quectel: [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
113 113  * Standard Size SIM Slot
114 114  * 2 x 4G Sticker Antenna.
... ... @@ -116,8 +116,6 @@
116 116  * Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
117 117  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
118 118  
119 -
120 -
121 121  == 1.3  Features ==
122 122  
123 123  
... ... @@ -127,15 +127,11 @@
127 127  * LoRaWAN Gateway
128 128  * 10 programmable parallel demodulation paths
129 129  
130 -
131 -
132 132  == 1.4  Hardware System Structure ==
133 133  
134 -
135 135  [[image:1657011152828-178.png]]
136 136  
137 137  
138 -
139 139  == 1.5  LG308N Applications ==
140 140  
141 141  
... ... @@ -142,25 +142,21 @@
142 142  [[image:1657011208596-209.png]]
143 143  
144 144  
145 -
146 146  == 1.6  LED Indicators ==
147 147  
148 -
149 149  LG308N has totally 6 LEDs, They are:
150 150  
151 -* **Power LED  **[[image:image-20220705165446-1.png||height="15" width="16"]] : This (% style="color:red" %)**LED**(%%) will be **solid on** if the device is properly powered.
152 -* **HEART LED **[[image:image-20220705165446-2.png||height="16" width="15"]] : No function yet. 
153 -* **SYS LED** [[image:image-20220705165446-3.png||height="16" width="15"]] :  This** LED** will shows different colors on different state:
131 +* **Power LED **[[image:image-20220705165446-1.png||height="21" width="22"]] : This (% style="color:red" %)**LED**(%%) will be **solid on** if the device is properly powered.
132 +* **HEART LED **[[image:image-20220705165446-2.png||height="19" width="18"]] : No function yet. 
133 +* **SYS LED** [[image:image-20220705165446-3.png||height="20" width="19"]] :  This** LED** will shows different colors on different state:
154 154  ** (% style="color:red" %)**SOLID**(%%):  Device is alive with LoRaWAN server connection.
155 155  ** (% style="color:red" %)**BLINKING**(%%)**:**  a) Device has internet connection but no LoRaWAN Connection.  or  b) Device is in booting stage, in this stage, it will (% style="color:red" %)**BLINKING**(%%)** **for several seconds.
156 156  ** (% style="color:red" %)**OFF**(%%):  Device doesn't have Internet connection.
157 157  
158 -* **ETH LED** [[image:image-20220705165446-5.png||height="15" width="17"]] [[image:image-20220705165446-5.png||height="15" width="17"]]: These two LEDs show the ETH interfaces connection status.
159 -* **WiFi LED** [[image:image-20220705165446-6.png||height="15" width="15"]]** **:  This LED shows the WiFi interface connection status.
138 +* **ETH LED**[[image:image-20220705165446-4.png||height="19" width="22"]] [[image:image-20220705165446-5.png||height="18" width="20"]] : These two LEDs show the ETH interfaces connection status.
139 +* **WiFi LED** [[image:image-20220705165446-6.png||height="19" width="19"]]** **:  This LED shows the WiFi interface connection status.
160 160  
161 -(((
162 162  (% style="color:red" %)**Note: Above LED indication are for firmware version > LG02_LG08~-~-build-v5.3.1584002217-20200312-1639**
163 -)))
164 164  
165 165  
166 166  (((
... ... @@ -171,14 +171,11 @@
171 171  
172 172  = 2.  Access and Configure LG308N =
173 173  
152 +The LG308N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
174 174  
175 -The LG308N is configured as a WiFi Access Point by default. User can access and configure the LG308N after connecting to its WiFi network, or via its Ethernet port.
176 176  
177 -
178 -
179 179  == 2.1  Find IP address of LG308N ==
180 180  
181 -
182 182  === 2.1.1  Connect via WiFi ===
183 183  
184 184  [[image:1657011715859-829.png]]
... ... @@ -186,22 +186,19 @@
186 186  
187 187  At the first boot of LG308N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
188 188  
189 -(% style="color:red" %)**Note: In latest version firmware, it has been password protected and the password is:  **(% style="background-color:yellow" %)**dragino+dragino**
164 +(% style="color:red" %)Note: In latest version firmware, it has been password protected and the password is: dragino+dragino
190 190  
191 -
192 192  [[image:1652413127647-377.png]]
193 193  
194 194  
195 195  (((
196 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LG308N has the default IP (% style="color:green" %)**10.130.1.1**
170 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LG308N has the default IP (% style="color:green" %)10.130.1.1
197 197  
198 -
199 199  
200 200  )))
201 201  
202 202  === 2.1.2  Connect via WAN port with DHCP IP from router ===
203 203  
204 -
205 205  [[image:1657011966663-484.png]]
206 206  
207 207  (((
... ... @@ -215,7 +215,6 @@
215 215  
216 216  === 2.1.3  Connect via LAN port with direct connection from PC ===
217 217  
218 -
219 219  [[image:1657012061799-674.png]]
220 220  
221 221  (((
... ... @@ -271,19 +271,21 @@
271 271  LG308N supports flexible network set up for different environment. This section describes the typical network topology can be set in LG308N. The typical network set up includes:
272 272  )))
273 273  
245 +
274 274  * **WAN Port Internet Mode**
275 275  * **WiFi Client Mode**
276 276  * **WiFi AP Mode**
277 277  * **Cellular Mode**
278 278  
251 +
279 279  == 3.2  Use WAN port to access Internet ==
280 280  
281 -By default, the LG308N is set to use the WAN port to connect to an upstream network. When you connect the LG308N's WAN port to an upstream router, LG308N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
254 +By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N’s WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
282 282  
283 283  [[image:1657012559318-672.png]]
284 284  
285 285  
286 -== 3.3  Access the Internet as a WiFi Client ==
259 +== 3.3 Access the Internet as a WiFi Client ==
287 287  
288 288  In the WiFi Client Mode, LG308N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
289 289  
... ... @@ -356,15 +356,11 @@
356 356  == 4.1  Create a gateway in TTN V3 Server ==
357 357  
358 358  
359 -(((
360 360  (% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
361 -)))
362 362  
363 363  (((
364 -(((
365 365  Every LG308N has a unique gateway id. The ID can be found at LoRaWAN page:
366 366  )))
367 -)))
368 368  
369 369  (((
370 370  [[image:1657013108723-531.png]]
... ... @@ -390,12 +390,12 @@
390 390  
391 391  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
392 392  
393 -
394 394  * Europe 1 (% style="color:red" %)**corresponding Gateway server address:** (% style="color:black" %)eu1.cloud.thethings.network
395 395  * North America 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)nam1.cloud.thethings.network
396 396  * Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
397 397  * Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
398 398  
367 +
399 399  (% style="color:#4f81bd" %)**Step 4: Create a Gateway**
400 400  
401 401  [[image:1652422440891-514.png||height="360" width="747"]]
... ... @@ -419,7 +419,7 @@
419 419  [[image:1652422509034-682.png||height="299" width="739"]]
420 420  
421 421  
422 -== 4.2  Configure LG308N to connect to TTN v3 ==
391 +== 4.2  Configure DLOS8N to connect to TTN v3 ==
423 423  
424 424  (((
425 425  You can now configure the LG308N to let it connect to TTN network V3.
... ... @@ -616,7 +616,7 @@
616 616  
617 617  (% style="color:red" %)**Note:**
618 618  
619 -~*: User can ignore the latitude and longitude settings here, LG308N will use the actually value from GPS module.
588 +~*: User can ignore the latitude and longitude settings here, DLOS8N will use the actually value from GPS module.
620 620  
621 621  ~**: Packet filter is to drop the unwanted LoRaWAN packet, instruction see here:
622 622  
... ... @@ -649,33 +649,27 @@
649 649  [[image:1652428648903-878.png||height="266" width="731"]]
650 650  
651 651  
652 -== 5.4  MQTT Settings ==
621 +== 5.4 MQTT Settings ==
653 653  
654 -(((
655 -If end nodes works in ABP mode, user can configure LG308N to transfer the data to MQTT broker,
656 -)))
623 +If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
657 657  
658 -(((
659 659  Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
660 -)))
661 661  
662 662  
663 663  [[image:1652428705046-212.png||height="417" width="733"]]
664 664  
665 665  
631 +== 5.5 System ==
666 666  
667 -== 5.5  System ==
633 +=== 5.5.1 System ~-~-> System Overview ===
668 668  
669 -=== 5.5.1  System ~-~-> System Overview ===
670 -
671 671  Shows the system info:
672 672  
673 673  [[image:1652428773760-580.png||height="408" width="728"]]
674 674  
675 675  
640 +=== 5.5.2 System ~-~-> General ( login settings) ===
676 676  
677 -=== 5.5.2  System ~-~-> General ( login settings) ===
678 -
679 679  [[image:1652428861256-300.png||height="354" width="724"]]
680 680  
681 681  (((
... ... @@ -683,7 +683,7 @@
683 683  )))
684 684  
685 685  (((
686 -There are two login for DLOS8: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
649 +There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
687 687  )))
688 688  
689 689  (((
... ... @@ -691,60 +691,56 @@
691 691  )))
692 692  
693 693  (((
694 -**__Timezone: __**Set device timezone.
657 +**__Timezone:__**Set device timezone.
695 695  )))
696 696  
697 697  (((
698 -**__Port forwarding: __**Enable/Disable the HTTP and SSH access via WAN interface.
661 +**__Port forwarding:__**Enable/Disable the HTTP and SSH access via WAN interface.
699 699  
700 -
701 701  
702 702  )))
703 703  
704 -=== 5.5.3  System ~-~-> Network ===
666 +=== 5.5.3 System ~-~-> Network ===
705 705  
706 706  [[image:1652429149053-824.png||height="467" width="725"]]
707 707  
708 708  (((
709 -**__LAN Settings:  __**When the LG308N has the AP enable, LAN settings specify the network info for LG308N's own network.
671 +**__LAN Settings:__**When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
710 710  )))
711 711  
712 712  (((
713 -__**WAN Settings: **__Setting for LG308N WAN port
675 +__**WAN Settings:**__Setting for DLOS8N WAN port
714 714  )))
715 715  
716 716  (((
717 -__**WiFi Settings:  **__Setting for LG308N WiFi IP when use it as WiFi Client
679 +__**WiFi Settings:**__Setting for DLOS8N WiFi IP when use it as WiFi Client
680 +
681 +
718 718  )))
719 719  
684 +=== 5.5.4 System ~-~-> WiFi ===
720 720  
686 +DLOS8N WiFi Settings.
721 721  
722 -=== 5.5.4  System ~-~-> WiFi ===
723 -
724 -LG308N WiFi Settings.
725 -
726 726  [[image:1652429430767-921.png||height="367" width="723"]]
727 727  
728 728  
691 +=== 5.5.5 System ~-~-> Cellular ===
729 729  
730 -=== 5.5.5  System ~-~-> Cellular ===
731 -
732 732  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
733 733  
734 734  [[image:1652429309615-825.png||height="320" width="732"]]
735 735  
736 -(% style="color:red" %)Note *: For LG308N which doesn't have the cellular module, this page will shows Cellular not detected.
697 +(% style="color:red" %)Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
737 737  
738 738  
700 +=== 5.5.6 System ~-~-> Network Status ===
739 739  
740 -=== 5.5.6  System ~-~-> Network Status ===
741 -
742 742  [[image:1652429486609-208.png||height="415" width="728"]]
743 743  
744 744  
705 +=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
745 745  
746 -=== 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
747 -
748 748  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
749 749  
750 750  [[image:1652429518191-846.png||height="332" width="733"]]
... ... @@ -755,7 +755,9 @@
755 755  
756 756  Please see this document for detail:
757 757  
758 -[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
717 +(((
718 +[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
719 +)))
759 759  
760 760  
761 761  R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Remote Access Gateway.WebHome]]**
... ... @@ -763,9 +763,8 @@
763 763  [[image:1652429624400-864.png||height="432" width="716"]]
764 764  
765 765  
727 +=== 5.5.8 System ~-~-> Firmware Upgrade ===
766 766  
767 -=== 5.5.8  System ~-~-> Firmware Upgrade ===
768 -
769 769  We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
770 770  
771 771  * **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
... ... @@ -772,12 +772,10 @@
772 772  
773 773  ( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]] )
774 774  
775 -
776 776  * **Change Log**: [[Firmware Change Log>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]].
777 777  
778 778  ( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
779 779  
780 -
781 781  (((
782 782  The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
783 783  )))
... ... @@ -788,18 +788,11 @@
788 788  
789 789  [[image:1652429711145-862.png||height="270" width="737"]]
790 790  
791 -
792 -(((
793 793  Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
794 -)))
795 795  
796 -(((
797 797  (% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
798 -)))
799 799  
800 -(((
801 801  The system will automatically boot into the new firmware after upgrade.
802 -)))
803 803  
804 804  [[image:1652429962190-224.png||height="358" width="729"]]
805 805  
... ... @@ -809,22 +809,18 @@
809 809  
810 810  (% style="color:#4f81bd" %)**//root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
811 811  
812 -
813 813  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
814 814  
815 815  
766 +=== 5.5.9 System ~-~-> Reboot/Reset ===
816 816  
817 -=== 5.5.9  System ~-~-> Reboot/Reset ===
818 -
819 819  [[image:1652430197132-330.png||height="256" width="724"]]
820 820  
821 821  (((
822 822  
823 -
824 -
825 825  )))
826 826  
827 -=== 5.5.10  System ~-~-> Package Maintain ===
774 +=== 5.5.10 System ~-~-> Package Maintain ===
828 828  
829 829  [[image:1652430243826-126.png||height="289" width="723"]]
830 830  
... ... @@ -831,45 +831,52 @@
831 831  Place to show what package has installed and possible to upgrade packages.
832 832  
833 833  
781 +== 5.6 LogRead ==
834 834  
835 -== 5.6  LogRead ==
783 +=== 5.6.1 LogRead ~-~-> LoRa Log ===
836 836  
837 -=== 5.6.1  LogRead ~-~-> LoRa Log ===
838 838  
839 839  Show the frequency for LoRa Radio and traffics.
840 840  
841 -[[image:1657069890320-513.png]]
788 +[[image:image-20220615204306-1.png||height="575" width="733"]]
842 842  
843 843  
791 +Show the IoT Server Connection State and FWD State
844 844  
793 +[[image:image-20220616083933-1.png||height="556" width="729"]]
845 845  
846 -=== 5.6.2  LogRead ~-~-> System Log ===
795 +DLOS8 can view GPS location in the Logread FWD State
847 847  
848 -Show the system log
849 849  
850 -[[image:1657069922599-794.png]]
798 +Show the Error logs, RxTxJson lorawan packages, and PULL State
851 851  
800 +[[image:image-20220615205416-6.png||height="442" width="884"]]
852 852  
853 853  
854 -= 6.  More features =
803 +=== 5.6.2 LogRead ~-~-> System Log ===
855 855  
856 -== 6.1  More instructions ==
805 +Show the system log
857 857  
858 -[[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
807 +[[image:1652430369760-511.png||height="373" width="730"]]
859 859  
809 += 6. More features =
860 860  
811 +== 6.1 More instructions ==
861 861  
862 -= 7.  Linux System =
813 +[[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
863 863  
864 -The LG308N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
865 865  
816 += 7. Linux System =
866 866  
867 -== 7.1  SSH Access for Linux console ==
818 +The DLOS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
868 868  
869 -User can access the Linux console via the SSH protocol. Make sure your PC and the LG308N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
870 870  
871 -IP address:  IP address of LG308N
821 +== 7.1 SSH Access for Linux console ==
872 872  
823 +User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
824 +
825 +IP address:  IP address of DLOS8N
826 +
873 873  Port:         22 (via WiFi AP mode) or 2222 (via WAN Interface)
874 874  
875 875  User Name:      (% style="color:green" %)**root**
... ... @@ -876,22 +876,19 @@
876 876  
877 877  Password:         (% style="color:green" %)**dragino** (% style="color:black" %)(default)
878 878  
879 -
880 880  After logging in, you will be in the Linux console and can enter commands as shown below.
881 881  
882 882  [[image:1652431588565-830.png]]
883 883  
884 -
885 885  The “(% class="mark" %)**logread -f**(%%)” command can be used to debug how system runs.
886 886  
887 -[[image:1657070133275-283.png]]
839 +[[image:1652431609193-637.png||height="214" width="732"]]
888 888  
889 889  
842 +== 7.2 Edit and Transfer files ==
890 890  
891 -== 7.2  Edit and Transfer files ==
892 -
893 893  (((
894 -The LG308N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
845 +The DLOS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
895 895  )))
896 896  
897 897  (((
... ... @@ -899,7 +899,7 @@
899 899  )))
900 900  
901 901  (((
902 -After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the LG308N, or edit the files directly in the windows.
853 +After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the DLOS8N, or edit the files directly in the windows.
903 903  )))
904 904  
905 905  (((
... ... @@ -909,25 +909,25 @@
909 909  [[image:1652431650755-450.png]]
910 910  
911 911  
912 -== 7.3  File System ==
863 +== 7.3 File System ==
913 913  
914 914  (((
866 +The DLOS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
867 +)))
868 +
915 915  (((
916 -The LG308N has a 16MB flash and a 64MB RAM. The /var and /tmp directory are in the RAM, contents stored in /tmp and /var will be erased after reboot the device. Other directories are in the flash and will keep after reboot.
870 +The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the DLOS8N flash.
917 917  )))
918 918  
919 -
920 920  (((
921 -The Linux system use around 8MB ~~10MB flash size which means there is not much room for user to store data in the LG308N flash. User can use an external USB flash to extend the size for storage.
874 +You can use an external USB flash memory device to extend the size of flash memory for storage.
922 922  )))
923 -)))
924 924  
925 925  
878 +== 7.4 Package maintenance system ==
926 926  
927 -== 7.4  Package maintenance system ==
880 +DLOS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
928 928  
929 -LG308N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
930 -
931 931  (((
932 932  Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
933 933  )))
... ... @@ -977,19 +977,15 @@
977 977  
978 978  (((
979 979  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
980 -
981 -
982 -
983 983  )))
984 984  
985 -= 8.  Upgrade Linux Firmware =
933 += 8. Upgrade Linux Firmware =
986 986  
987 987  
936 += 9. FAQ =
988 988  
989 -= 9.  FAQ =
938 +== 9.1 How can I configure for a customized frequency band? ==
990 990  
991 -== 9.1  How can I configure for a customized frequency band? ==
992 -
993 993  (((
994 994  See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
995 995  )))
... ... @@ -998,15 +998,15 @@
998 998  
999 999  )))
1000 1000  
1001 -== 9.2  Can I connect LG308N to LORIOT? ==
948 +== 9.2 Can I connect DLOS8N to LORIOT? ==
1002 1002  
1003 1003  Yes, the set up instruction is here: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
1004 1004  
1005 1005  
1006 -== 9.3  Can I make my own firmware for the gateway, where can I find the source code? ==
953 +== 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
1007 1007  
1008 1008  (((
1009 -Yes, You can make your own firmware for the LG308N for branding purposes or to add customized applications.
956 +Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
1010 1010  )))
1011 1011  
1012 1012  (((
... ... @@ -1014,41 +1014,15 @@
1014 1014  )))
1015 1015  
1016 1016  
1017 -== 9.4  Can I use 868Mhz version for 915Mhz bands? ==
964 +== 9.4 Can I use 868Mhz version for 915Mhz bands? ==
1018 1018  
1019 1019  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
1020 1020  
1021 1021  
1022 -== 9.5  Can I control the LEDs? ==
969 += 10. Trouble Shooting =
1023 1023  
1024 -Except the PWR LED is controlled by +3v3 power directly. All other LEDs can be controlled by developer.
971 +== 10.1 I get kernel error when install new package, how to fix? ==
1025 1025  
1026 -
1027 -(% style="color:blue" %)**Control Globe LED:**
1028 -
1029 -ON: echo 1 > /sys/class/leds/dragino2\:red\:wlan/brightness 
1030 -
1031 -OFF: echo 0 > /sys/class/leds/dragino2\:red\:wlan/brightness
1032 -
1033 -
1034 -(% style="color:blue" %)**Control HEART LED:**
1035 -
1036 -First export the gpio27 and set to out
1037 -
1038 -echo 27 > /sys/class/gpio/export
1039 -
1040 -echo out > /sys/class/gpio/gpio27/direction
1041 -
1042 -ON: echo 0 > /sys/class/gpio/gpio27/value
1043 -
1044 -OFF: echo 1 > /sys/class/gpio/gpio27/value
1045 -
1046 -
1047 -
1048 -= 10.  Trouble Shooting =
1049 -
1050 -== 10.1  I get kernel error when install new package, how to fix? ==
1051 -
1052 1052  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
1053 1053  
1054 1054  (% style="background-color:yellow" %)root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
... ... @@ -1070,9 +1070,8 @@
1070 1070  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
1071 1071  
1072 1072  
994 +== 10.2 How to recover the DLOS8N if the firmware crashes ==
1073 1073  
1074 -== 10.2  How to recover the LG308N if the firmware crashes ==
1075 -
1076 1076  (((
1077 1077  Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
1078 1078  )))
... ... @@ -1081,81 +1081,64 @@
1081 1081  
1082 1082  )))
1083 1083  
1084 -== 10.3  I configured LG308N for WiFi access and lost its IP. What to do now? ==
1004 +== 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
1085 1085  
1086 -[[image:1657074078183-336.png]]
1006 +[[image:1652435238615-272.png||height="247" width="727"]]
1087 1087  
1088 1088  (((
1089 -(((
1090 -The LG308N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access LG308N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
1009 +The DLOS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access DLOS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
1091 1091  )))
1092 -)))
1093 1093  
1094 -(((
1095 1095  (% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
1096 -)))
1097 1097  
1098 1098  
1099 -(((
1100 1100  Steps to connect via fall back IP:
1101 -)))
1102 1102  
1103 -(((
1104 -~1. Connect PC's Ethernet port to LG01's LAN port
1105 -)))
1017 +~1. Connect PC’s Ethernet port to DLOS8N’s WAN port
1106 1106  
1107 -(((
1108 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
1109 -)))
1019 +2. Configure PC’s Ethernet port has
1020 + IP: 172.31.255.253 and
1021 + Netmask: 255.255.255.252
1110 1110  
1111 -(((
1112 1112  As below photo:
1113 -)))
1114 1114  
1115 1115  [[image:1652435256286-879.png]]
1116 1116  
1117 -3. In PC, use 172.31.255.254 to access LG308N via Web or Console.
1027 +3. In the PC, use IP address 172.31.255.254 to access the DLOS8N via Web or Console.
1118 1118  
1029 +Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1119 1119  
1120 1120  
1121 -= 11.  Order Info =
1032 += 11. Order Info =
1122 1122  
1034 +(% style="color:#4f81bd" %) **//PART: DLOS8N-XXX-YYY//: **
1123 1123  
1124 -(% style="color:#4f81bd" %)**//PART: DLOS8N-XXX-YYY//: **
1036 +(% style="color:#4f81bd" %) **//XXX: Frequency Band//**
1125 1125  
1126 -(% style="color:#4f81bd" %)**//XXX: Frequency Band//**
1038 +* (% style="color:#4f81bd" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1039 +* (% style="color:#4f81bd" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1127 1127  
1128 -* (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1129 -* (% style="color:red" %)** 915**(% style="color:black" %):  valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1041 +(% style="color:#4f81bd" %) **//YYY: 4G Cellular Option//**
1130 1130  
1131 -(% style="color:#4f81bd" %)
1043 +* (% style="color:#4f81bd" %)** E**(% style="color:black" %): EMEA, Korea, Thailand, India.
1044 +* (% style="color:#4f81bd" %)** A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
1045 +* (% style="color:#4f81bd" %)** AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1046 +* (% style="color:#4f81bd" %)** J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
1132 1132  
1133 -(% style="color:#4f81bd" %)**//YYY: 4G Cellular Option//**
1134 -
1135 -* (% style="color:red" %)** EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1136 -* (% style="color:red" %)** EC25-A**(% style="color:black" %):  North America/ Rogers/AT&T/T-Mobile.
1137 -* (% style="color:red" %)** EC25-AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1138 -* (% style="color:red" %)** EC25-J**(% style="color:black" %):  Japan, DOCOMO/SoftBank/ KDDI
1139 -
1140 1140  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1141 1141  
1142 1142  
1143 -= 12.  Packing Info =
1051 += 12. Packing Info =
1144 1144  
1145 1145  (((
1146 -
1147 -
1148 1148  **Package Includes**:
1055 +)))
1149 1149  
1150 -* LG308N or LG08 LoRa Gateway x 1
1151 -* Stick Antenna for LoRa RF part. Frequency is one of 433 or 868 or 915Mhz depends the model ordered
1152 -* Power Adapter: EU/AU/US type power adapter depends on country to be used
1057 +* DLOS8N LoRaWAN Gateway x 1
1058 +* Stick Antenna for LoRa RF part. Frequency is one of 470 or 868 or 915Mhz depends the model ordered
1153 1153  * Packaging with environmental protection paper box
1154 -)))
1155 1155  
1156 1156  (((
1157 -
1158 -
1159 1159  **Dimension and weight**:
1160 1160  )))
1161 1161  
... ... @@ -1164,21 +1164,9 @@
1164 1164  * Package Size: 49 x 19.5 x x 19Package Size: 4912 cm
1165 1165  * Weight: 2.5kg
1166 1166  
1070 += 13. Support =
1167 1167  
1168 -= 13.  Support =
1169 -
1170 1170  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1171 1171  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
1172 1172  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
1173 1173  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1174 -
1175 -
1176 -= 14.  Reference =
1177 -
1178 -* Source code for LG08 LoRa Gateway: [[https:~~/~~/github.com/dragino/openwrt_lede-18.06>>url:https://github.com/dragino/openwrt_lede-18.06]]
1179 -
1180 -* OpenWrt official Wiki: [[http:~~/~~/www.openwrt.org/>>url:http://www.openwrt.org/]]
1181 -
1182 -* Firmware: [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308N-OLG308N/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]]
1183 -
1184 -* Hardware Source code: [[https:~~/~~/github.com/dragino/motherboard-hardware/tree/master/LG308N>>url:https://github.com/dragino/motherboard-hardware/tree/master/LG308]]
1657069890320-513.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -63.2 KB
Content
1657069922599-794.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -58.2 KB
Content
1657070133275-283.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -221.0 KB
Content
1657071488240-907.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -60.0 KB
Content
1657074078183-336.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -60.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0