Skip to Content
Last modified by Kilight Cao on 2025/02/07 08:57
From version 123.7
edited by Xiaoling
on 2022/07/06 09:50
Change comment: There is no comment for this version
To version 119.3
edited by Xiaoling
on 2022/07/06 08:49
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -105,10 +105,9 @@
105 105  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
106 106  
107 107  
108 -
109 -
110 110  == 1.3  Features ==
111 111  
110 +
112 112  * Open Source Linux system
113 113  * Managed by Web GUI, SSH via LAN or WiFi
114 114  * Emulates 49x LoRa demodulators
... ... @@ -116,8 +116,6 @@
116 116  * 10 programmable parallel demodulation paths
117 117  
118 118  
119 -
120 -
121 121  == 1.4  Hardware System Structure ==
122 122  
123 123  [[image:1657011152828-178.png]]
... ... @@ -252,6 +252,8 @@
252 252  * **WiFi AP Mode**
253 253  * **Cellular Mode**
254 254  
252 +
253 +
255 255  == 3.2  Use WAN port to access Internet ==
256 256  
257 257  By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N’s WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
... ... @@ -315,6 +315,7 @@
315 315  * Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don't use it for internet connection.
316 316  * RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn't connected.
317 317  
317 +
318 318  [[image:1657012821329-972.png]]
319 319  
320 320  
... ... @@ -368,6 +368,8 @@
368 368  * Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
369 369  * Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
370 370  
371 +
372 +
371 371  (% style="color:#4f81bd" %)**Step 4: Create a Gateway**
372 372  
373 373  [[image:1652422440891-514.png||height="360" width="747"]]
... ... @@ -621,9 +621,9 @@
621 621  [[image:1652428648903-878.png||height="266" width="731"]]
622 622  
623 623  
624 -== 5.4  MQTT Settings ==
626 +== 5.4 MQTT Settings ==
625 625  
626 -If end nodes works in ABP mode, user can configure LG308N to transfer the data to MQTT broker,
628 +If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
627 627  
628 628  Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
629 629  
... ... @@ -631,19 +631,17 @@
631 631  [[image:1652428705046-212.png||height="417" width="733"]]
632 632  
633 633  
636 +== 5.5 System ==
634 634  
635 -== 5.5  System ==
638 +=== 5.5.1 System ~-~-> System Overview ===
636 636  
637 -=== 5.5.1  System ~-~-> System Overview ===
638 -
639 639  Shows the system info:
640 640  
641 641  [[image:1652428773760-580.png||height="408" width="728"]]
642 642  
643 643  
645 +=== 5.5.2 System ~-~-> General ( login settings) ===
644 644  
645 -=== 5.5.2  System ~-~-> General ( login settings) ===
646 -
647 647  [[image:1652428861256-300.png||height="354" width="724"]]
648 648  
649 649  (((
... ... @@ -651,7 +651,7 @@
651 651  )))
652 652  
653 653  (((
654 -There are two login for DLOS8: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
654 +There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
655 655  )))
656 656  
657 657  (((
... ... @@ -659,60 +659,56 @@
659 659  )))
660 660  
661 661  (((
662 -**__Timezone: __**Set device timezone.
662 +**__Timezone:__**Set device timezone.
663 663  )))
664 664  
665 665  (((
666 -**__Port forwarding: __**Enable/Disable the HTTP and SSH access via WAN interface.
666 +**__Port forwarding:__**Enable/Disable the HTTP and SSH access via WAN interface.
667 667  
668 -
669 669  
670 670  )))
671 671  
672 -=== 5.5.3  System ~-~-> Network ===
671 +=== 5.5.3 System ~-~-> Network ===
673 673  
674 674  [[image:1652429149053-824.png||height="467" width="725"]]
675 675  
676 676  (((
677 -**__LAN Settings:  __**When the LG308N has the AP enable, LAN settings specify the network info for LG308N's own network.
676 +**__LAN Settings:__**When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
678 678  )))
679 679  
680 680  (((
681 -__**WAN Settings: **__Setting for LG308N WAN port
680 +__**WAN Settings:**__Setting for DLOS8N WAN port
682 682  )))
683 683  
684 684  (((
685 -__**WiFi Settings:  **__Setting for LG308N WiFi IP when use it as WiFi Client
684 +__**WiFi Settings:**__Setting for DLOS8N WiFi IP when use it as WiFi Client
685 +
686 +
686 686  )))
687 687  
689 +=== 5.5.4 System ~-~-> WiFi ===
688 688  
691 +DLOS8N WiFi Settings.
689 689  
690 -=== 5.5.4  System ~-~-> WiFi ===
691 -
692 -LG308N WiFi Settings.
693 -
694 694  [[image:1652429430767-921.png||height="367" width="723"]]
695 695  
696 696  
696 +=== 5.5.5 System ~-~-> Cellular ===
697 697  
698 -=== 5.5.5  System ~-~-> Cellular ===
699 -
700 700  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
701 701  
702 702  [[image:1652429309615-825.png||height="320" width="732"]]
703 703  
704 -(% style="color:red" %)Note *: For LG308N which doesn't have the cellular module, this page will shows Cellular not detected.
702 +(% style="color:red" %)Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
705 705  
706 706  
705 +=== 5.5.6 System ~-~-> Network Status ===
707 707  
708 -=== 5.5.6  System ~-~-> Network Status ===
709 -
710 710  [[image:1652429486609-208.png||height="415" width="728"]]
711 711  
712 712  
710 +=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
713 713  
714 -=== 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
715 -
716 716  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
717 717  
718 718  [[image:1652429518191-846.png||height="332" width="733"]]
... ... @@ -723,10 +723,8 @@
723 723  
724 724  Please see this document for detail:
725 725  
726 -[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
727 -
728 728  (((
729 -
723 +[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
730 730  )))
731 731  
732 732  
... ... @@ -735,9 +735,8 @@
735 735  [[image:1652429624400-864.png||height="432" width="716"]]
736 736  
737 737  
732 +=== 5.5.8 System ~-~-> Firmware Upgrade ===
738 738  
739 -=== 5.5.8  System ~-~-> Firmware Upgrade ===
740 -
741 741  We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
742 742  
743 743  * **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
... ... @@ -744,12 +744,10 @@
744 744  
745 745  ( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]] )
746 746  
747 -
748 748  * **Change Log**: [[Firmware Change Log>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]].
749 749  
750 750  ( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
751 751  
752 -
753 753  (((
754 754  The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
755 755  )))
... ... @@ -760,7 +760,6 @@
760 760  
761 761  [[image:1652429711145-862.png||height="270" width="737"]]
762 762  
763 -
764 764  Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
765 765  
766 766  (% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
... ... @@ -775,22 +775,18 @@
775 775  
776 776  (% style="color:#4f81bd" %)**//root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
777 777  
778 -
779 779  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
780 780  
781 781  
771 +=== 5.5.9 System ~-~-> Reboot/Reset ===
782 782  
783 -=== 5.5.9  System ~-~-> Reboot/Reset ===
784 -
785 785  [[image:1652430197132-330.png||height="256" width="724"]]
786 786  
787 787  (((
788 788  
789 -
790 -
791 791  )))
792 792  
793 -=== 5.5.10  System ~-~-> Package Maintain ===
779 +=== 5.5.10 System ~-~-> Package Maintain ===
794 794  
795 795  [[image:1652430243826-126.png||height="289" width="723"]]
796 796  
... ... @@ -797,45 +797,52 @@
797 797  Place to show what package has installed and possible to upgrade packages.
798 798  
799 799  
786 +== 5.6 LogRead ==
800 800  
801 -== 5.6  LogRead ==
788 +=== 5.6.1 LogRead ~-~-> LoRa Log ===
802 802  
803 -=== 5.6.1  LogRead ~-~-> LoRa Log ===
804 804  
805 805  Show the frequency for LoRa Radio and traffics.
806 806  
807 -[[image:1657069890320-513.png]]
793 +[[image:image-20220615204306-1.png||height="575" width="733"]]
808 808  
809 809  
796 +Show the IoT Server Connection State and FWD State
810 810  
798 +[[image:image-20220616083933-1.png||height="556" width="729"]]
811 811  
812 -=== 5.6.2  LogRead ~-~-> System Log ===
800 +DLOS8 can view GPS location in the Logread FWD State
813 813  
814 -Show the system log
815 815  
816 -[[image:1657069922599-794.png]]
803 +Show the Error logs, RxTxJson lorawan packages, and PULL State
817 817  
805 +[[image:image-20220615205416-6.png||height="442" width="884"]]
818 818  
819 819  
820 -= 6.  More features =
808 +=== 5.6.2 LogRead ~-~-> System Log ===
821 821  
822 -== 6.1  More instructions ==
810 +Show the system log
823 823  
824 -[[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
812 +[[image:1652430369760-511.png||height="373" width="730"]]
825 825  
814 += 6. More features =
826 826  
816 +== 6.1 More instructions ==
827 827  
828 -= 7.  Linux System =
818 +[[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
829 829  
830 -The LG308N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
831 831  
821 += 7. Linux System =
832 832  
833 -== 7.1  SSH Access for Linux console ==
823 +The DLOS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
834 834  
835 -User can access the Linux console via the SSH protocol. Make sure your PC and the LG308N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
836 836  
837 -IP address:  IP address of LG308N
826 +== 7.1 SSH Access for Linux console ==
838 838  
828 +User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
829 +
830 +IP address:  IP address of DLOS8N
831 +
839 839  Port:         22 (via WiFi AP mode) or 2222 (via WAN Interface)
840 840  
841 841  User Name:      (% style="color:green" %)**root**
... ... @@ -842,22 +842,19 @@
842 842  
843 843  Password:         (% style="color:green" %)**dragino** (% style="color:black" %)(default)
844 844  
845 -
846 846  After logging in, you will be in the Linux console and can enter commands as shown below.
847 847  
848 848  [[image:1652431588565-830.png]]
849 849  
850 -
851 851  The “(% class="mark" %)**logread -f**(%%)” command can be used to debug how system runs.
852 852  
853 -[[image:1657070133275-283.png]]
844 +[[image:1652431609193-637.png||height="214" width="732"]]
854 854  
855 855  
847 +== 7.2 Edit and Transfer files ==
856 856  
857 -== 7.2  Edit and Transfer files ==
858 -
859 859  (((
860 -The LG308N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
850 +The DLOS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
861 861  )))
862 862  
863 863  (((
... ... @@ -865,7 +865,7 @@
865 865  )))
866 866  
867 867  (((
868 -After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the LG308N, or edit the files directly in the windows.
858 +After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the DLOS8N, or edit the files directly in the windows.
869 869  )))
870 870  
871 871  (((
... ... @@ -875,25 +875,25 @@
875 875  [[image:1652431650755-450.png]]
876 876  
877 877  
878 -== 7.3  File System ==
868 +== 7.3 File System ==
879 879  
880 880  (((
871 +The DLOS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
872 +)))
873 +
881 881  (((
882 -The LG308N has a 16MB flash and a 64MB RAM. The /var and /tmp directory are in the RAM, contents stored in /tmp and /var will be erased after reboot the device. Other directories are in the flash and will keep after reboot.
875 +The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the DLOS8N flash.
883 883  )))
884 884  
885 -
886 886  (((
887 -The Linux system use around 8MB ~~10MB flash size which means there is not much room for user to store data in the LG308N flash. User can use an external USB flash to extend the size for storage.
879 +You can use an external USB flash memory device to extend the size of flash memory for storage.
888 888  )))
889 -)))
890 890  
891 891  
883 +== 7.4 Package maintenance system ==
892 892  
893 -== 7.4  Package maintenance system ==
885 +DLOS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
894 894  
895 -LG308N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
896 -
897 897  (((
898 898  Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
899 899  )))
... ... @@ -943,19 +943,15 @@
943 943  
944 944  (((
945 945  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
946 -
947 -
948 -
949 949  )))
950 950  
951 -= 8.  Upgrade Linux Firmware =
938 += 8. Upgrade Linux Firmware =
952 952  
953 953  
941 += 9. FAQ =
954 954  
955 -= 9.  FAQ =
943 +== 9.1 How can I configure for a customized frequency band? ==
956 956  
957 -== 9.1  How can I configure for a customized frequency band? ==
958 -
959 959  (((
960 960  See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
961 961  )))
... ... @@ -964,15 +964,15 @@
964 964  
965 965  )))
966 966  
967 -== 9.2  Can I connect DLOS8N to LORIOT? ==
953 +== 9.2 Can I connect DLOS8N to LORIOT? ==
968 968  
969 969  Yes, the set up instruction is here: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
970 970  
971 971  
972 -== 9.3  Can I make my own firmware for the gateway, where can I find the source code? ==
958 +== 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
973 973  
974 974  (((
975 -Yes, You can make your own firmware for the LG308N for branding purposes or to add customized applications.
961 +Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
976 976  )))
977 977  
978 978  (((
... ... @@ -980,37 +980,11 @@
980 980  )))
981 981  
982 982  
983 -== 9.4  Can I use 868Mhz version for 915Mhz bands? ==
969 +== 9.4 Can I use 868Mhz version for 915Mhz bands? ==
984 984  
985 985  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
986 986  
987 987  
988 -== 9.5  Can I control the LEDs? ==
989 -
990 -Except the PWR LED is controlled by +3v3 power directly. All other LEDs can be controlled by developer.
991 -
992 -
993 -(% style="color:blue" %)**Control Globe LED:**
994 -
995 -ON: echo 1 > /sys/class/leds/dragino2\:red\:wlan/brightness 
996 -
997 -OFF: echo 0 > /sys/class/leds/dragino2\:red\:wlan/brightness
998 -
999 -
1000 -(% style="color:blue" %)**Control HEART LED:**
1001 -
1002 -First export the gpio27 and set to out
1003 -
1004 -echo 27 > /sys/class/gpio/export
1005 -
1006 -echo out > /sys/class/gpio/gpio27/direction
1007 -
1008 -ON: echo 0 > /sys/class/gpio/gpio27/value
1009 -
1010 -OFF: echo 1 > /sys/class/gpio/gpio27/value
1011 -
1012 -
1013 -
1014 1014  = 10. Trouble Shooting =
1015 1015  
1016 1016  == 10.1 I get kernel error when install new package, how to fix? ==
... ... @@ -1036,9 +1036,8 @@
1036 1036  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
1037 1037  
1038 1038  
999 +== 10.2 How to recover the DLOS8N if the firmware crashes ==
1039 1039  
1040 -== 10.2  How to recover the LG308N if the firmware crashes ==
1041 -
1042 1042  (((
1043 1043  Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
1044 1044  )))
... ... @@ -1047,12 +1047,12 @@
1047 1047  
1048 1048  )))
1049 1049  
1050 -== 10.3 I configured LG308N for WiFi access and lost its IP. What to do now? ==
1009 +== 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
1051 1051  
1052 -[[image:1657071488240-907.png]]
1011 +[[image:1652435238615-272.png||height="247" width="727"]]
1053 1053  
1054 1054  (((
1055 -The LG308N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access LG308N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
1014 +The DLOS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access DLOS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
1056 1056  )))
1057 1057  
1058 1058  (% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
... ... @@ -1060,37 +1060,37 @@
1060 1060  
1061 1061  Steps to connect via fall back IP:
1062 1062  
1063 -~1. Connect PC's Ethernet port to LG01's LAN port
1022 +~1. Connect PC’s Ethernet port to DLOS8N’s WAN port
1064 1064  
1065 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
1024 +2. Configure PC’s Ethernet port has
1025 + IP: 172.31.255.253 and
1026 + Netmask: 255.255.255.252
1066 1066  
1067 1067  As below photo:
1068 1068  
1069 1069  [[image:1652435256286-879.png]]
1070 1070  
1071 -3. In PC, use 172.31.255.254 to access LG308N via Web or Console.
1032 +3. In the PC, use IP address 172.31.255.254 to access the DLOS8N via Web or Console.
1072 1072  
1034 +Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1073 1073  
1074 1074  
1075 1075  = 11. Order Info =
1076 1076  
1039 +(% style="color:#4f81bd" %) **//PART: DLOS8N-XXX-YYY//: **
1077 1077  
1078 -(% style="color:#4f81bd" %)**//PART: DLOS8N-XXX-YYY//: **
1041 +(% style="color:#4f81bd" %) **//XXX: Frequency Band//**
1079 1079  
1080 -(% style="color:#4f81bd" %)**//XXX: Frequency Band//**
1043 +* (% style="color:#4f81bd" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1044 +* (% style="color:#4f81bd" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1081 1081  
1082 -* (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1083 -* (% style="color:red" %)** 915**(% style="color:black" %):  valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1046 +(% style="color:#4f81bd" %) **//YYY: 4G Cellular Option//**
1084 1084  
1085 -(% style="color:#4f81bd" %)
1048 +* (% style="color:#4f81bd" %)** E**(% style="color:black" %): EMEA, Korea, Thailand, India.
1049 +* (% style="color:#4f81bd" %)** A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
1050 +* (% style="color:#4f81bd" %)** AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1051 +* (% style="color:#4f81bd" %)** J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
1086 1086  
1087 -(% style="color:#4f81bd" %)**//YYY: 4G Cellular Option//**
1088 -
1089 -* (% style="color:red" %)** EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1090 -* (% style="color:red" %)** EC25-A**(% style="color:black" %):  North America/ Rogers/AT&T/T-Mobile.
1091 -* (% style="color:red" %)** EC25-AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1092 -* (% style="color:red" %)** EC25-J**(% style="color:black" %):  Japan, DOCOMO/SoftBank/ KDDI
1093 -
1094 1094  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1095 1095  
1096 1096  
... ... @@ -1097,19 +1097,14 @@
1097 1097  = 12. Packing Info =
1098 1098  
1099 1099  (((
1100 -
1101 -
1102 1102  **Package Includes**:
1060 +)))
1103 1103  
1104 -* LG308N or LG08 LoRa Gateway x 1
1105 -* Stick Antenna for LoRa RF part. Frequency is one of 433 or 868 or 915Mhz depends the model ordered
1106 -* Power Adapter: EU/AU/US type power adapter depends on country to be used
1062 +* DLOS8N LoRaWAN Gateway x 1
1063 +* Stick Antenna for LoRa RF part. Frequency is one of 470 or 868 or 915Mhz depends the model ordered
1107 1107  * Packaging with environmental protection paper box
1108 -)))
1109 1109  
1110 1110  (((
1111 -
1112 -
1113 1113  **Dimension and weight**:
1114 1114  )))
1115 1115  
... ... @@ -1118,8 +1118,6 @@
1118 1118  * Package Size: 49 x 19.5 x x 19Package Size: 4912 cm
1119 1119  * Weight: 2.5kg
1120 1120  
1121 -
1122 -
1123 1123  = 13. Support =
1124 1124  
1125 1125  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1657069890320-513.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -63.2 KB
Content
1657069922599-794.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -58.2 KB
Content
1657070133275-283.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -221.0 KB
Content
1657071488240-907.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -60.0 KB
Content