Last modified by Kilight Cao on 2025/02/07 08:57
<
From version < 119.6 >
edited by Xiaoling
on 2022/07/06 09:02
To version < 123.20 >
edited by Xiaoling
on 2022/07/06 10:19
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -104,9 +104,11 @@
104 104  * Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
105 105  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
106 106  
107 -== 1.3  Features ==
108 108  
109 109  
109 +
110 +== 1.3  Features ==
111 +
110 110  * Open Source Linux system
111 111  * Managed by Web GUI, SSH via LAN or WiFi
112 112  * Emulates 49x LoRa demodulators
... ... @@ -113,6 +113,9 @@
113 113  * LoRaWAN Gateway
114 114  * 10 programmable parallel demodulation paths
115 115  
118 +
119 +
120 +
116 116  == 1.4  Hardware System Structure ==
117 117  
118 118  [[image:1657011152828-178.png]]
... ... @@ -128,17 +128,19 @@
128 128  
129 129  LG308N has totally 6 LEDs, They are:
130 130  
131 -* **Power LED **[[image:image-20220705165446-1.png||height="21" width="22"]] : This (% style="color:red" %)**LED**(%%) will be **solid on** if the device is properly powered.
132 -* **HEART LED **[[image:image-20220705165446-2.png||height="19" width="18"]] : No function yet. 
133 -* **SYS LED** [[image:image-20220705165446-3.png||height="20" width="19"]] :  This** LED** will shows different colors on different state:
136 +* **Power LED  **[[image:image-20220705165446-1.png||height="15" width="16"]] : This (% style="color:red" %)**LED**(%%) will be **solid on** if the device is properly powered.
137 +* **HEART LED **[[image:image-20220705165446-2.png||height="16" width="15"]] : No function yet. 
138 +* **SYS LED** [[image:image-20220705165446-3.png||height="16" width="15"]] :  This** LED** will shows different colors on different state:
134 134  ** (% style="color:red" %)**SOLID**(%%):  Device is alive with LoRaWAN server connection.
135 135  ** (% style="color:red" %)**BLINKING**(%%)**:**  a) Device has internet connection but no LoRaWAN Connection.  or  b) Device is in booting stage, in this stage, it will (% style="color:red" %)**BLINKING**(%%)** **for several seconds.
136 136  ** (% style="color:red" %)**OFF**(%%):  Device doesn't have Internet connection.
137 137  
138 -* **ETH LED**[[image:image-20220705165446-4.png||height="19" width="22"]] [[image:image-20220705165446-5.png||height="18" width="20"]] : These two LEDs show the ETH interfaces connection status.
139 -* **WiFi LED** [[image:image-20220705165446-6.png||height="19" width="19"]]** **:  This LED shows the WiFi interface connection status.
143 +* **ETH LED** [[image:image-20220705165446-5.png||height="15" width="17"]] [[image:image-20220705165446-5.png||height="15" width="17"]]: These two LEDs show the ETH interfaces connection status.
144 +* **WiFi LED** [[image:image-20220705165446-6.png||height="15" width="15"]]** **:  This LED shows the WiFi interface connection status.
140 140  
146 +(((
141 141  (% style="color:red" %)**Note: Above LED indication are for firmware version > LG02_LG08~-~-build-v5.3.1584002217-20200312-1639**
148 +)))
142 142  
143 143  
144 144  (((
... ... @@ -149,7 +149,7 @@
149 149  
150 150  = 2.  Access and Configure LG308N =
151 151  
152 -The LG308N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
159 +The LG308N is configured as a WiFi Access Point by default. User can access and configure the LG308N after connecting to its WiFi network, or via its Ethernet port.
153 153  
154 154  
155 155  == 2.1  Find IP address of LG308N ==
... ... @@ -248,9 +248,11 @@
248 248  * **Cellular Mode**
249 249  
250 250  
258 +
259 +
251 251  == 3.2  Use WAN port to access Internet ==
252 252  
253 -By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N’s WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
262 +By default, the LG308N is set to use the WAN port to connect to an upstream network. When you connect the LG308N's WAN port to an upstream router, LG308N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
254 254  
255 255  [[image:1657012559318-672.png]]
256 256  
... ... @@ -328,11 +328,15 @@
328 328  == 4.1  Create a gateway in TTN V3 Server ==
329 329  
330 330  
340 +(((
331 331  (% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
342 +)))
332 332  
333 333  (((
345 +(((
334 334  Every LG308N has a unique gateway id. The ID can be found at LoRaWAN page:
335 335  )))
348 +)))
336 336  
337 337  (((
338 338  [[image:1657013108723-531.png]]
... ... @@ -364,7 +364,6 @@
364 364  * Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
365 365  * Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
366 366  
367 -
368 368  (% style="color:#4f81bd" %)**Step 4: Create a Gateway**
369 369  
370 370  [[image:1652422440891-514.png||height="360" width="747"]]
... ... @@ -388,7 +388,7 @@
388 388  [[image:1652422509034-682.png||height="299" width="739"]]
389 389  
390 390  
391 -== 4.2  Configure DLOS8N to connect to TTN v3 ==
403 +== 4.2  Configure LG308N to connect to TTN v3 ==
392 392  
393 393  (((
394 394  You can now configure the LG308N to let it connect to TTN network V3.
... ... @@ -585,7 +585,7 @@
585 585  
586 586  (% style="color:red" %)**Note:**
587 587  
588 -~*: User can ignore the latitude and longitude settings here, DLOS8N will use the actually value from GPS module.
600 +~*: User can ignore the latitude and longitude settings here, LG308N will use the actually value from GPS module.
589 589  
590 590  ~**: Packet filter is to drop the unwanted LoRaWAN packet, instruction see here:
591 591  
... ... @@ -618,11 +618,15 @@
618 618  [[image:1652428648903-878.png||height="266" width="731"]]
619 619  
620 620  
621 -== 5.4 MQTT Settings ==
633 +== 5.4  MQTT Settings ==
622 622  
635 +(((
623 623  If end nodes works in ABP mode, user can configure LG308N to transfer the data to MQTT broker,
637 +)))
624 624  
639 +(((
625 625  Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
641 +)))
626 626  
627 627  
628 628  [[image:1652428705046-212.png||height="417" width="733"]]
... ... @@ -629,9 +629,9 @@
629 629  
630 630  
631 631  
632 -== 5.5 System ==
648 +== 5.5  System ==
633 633  
634 -=== 5.5.1 System ~-~-> System Overview ===
650 +=== 5.5.1  System ~-~-> System Overview ===
635 635  
636 636  Shows the system info:
637 637  
... ... @@ -639,7 +639,7 @@
639 639  
640 640  
641 641  
642 -=== 5.5.2 System ~-~-> General ( login settings) ===
658 +=== 5.5.2  System ~-~-> General ( login settings) ===
643 643  
644 644  [[image:1652428861256-300.png||height="354" width="724"]]
645 645  
... ... @@ -666,7 +666,7 @@
666 666  
667 667  )))
668 668  
669 -=== 5.5.3 System ~-~-> Network ===
685 +=== 5.5.3  System ~-~-> Network ===
670 670  
671 671  [[image:1652429149053-824.png||height="467" width="725"]]
672 672  
... ... @@ -684,7 +684,7 @@
684 684  
685 685  
686 686  
687 -=== 5.5.4 System ~-~-> WiFi ===
703 +=== 5.5.4  System ~-~-> WiFi ===
688 688  
689 689  LG308N WiFi Settings.
690 690  
... ... @@ -692,7 +692,7 @@
692 692  
693 693  
694 694  
695 -=== 5.5.5 System ~-~-> Cellular ===
711 +=== 5.5.5  System ~-~-> Cellular ===
696 696  
697 697  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
698 698  
... ... @@ -702,13 +702,13 @@
702 702  
703 703  
704 704  
705 -=== 5.5.6 System ~-~-> Network Status ===
721 +=== 5.5.6  System ~-~-> Network Status ===
706 706  
707 707  [[image:1652429486609-208.png||height="415" width="728"]]
708 708  
709 709  
710 710  
711 -=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
727 +=== 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
712 712  
713 713  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
714 714  
... ... @@ -720,9 +720,7 @@
720 720  
721 721  Please see this document for detail:
722 722  
723 -(((
724 -[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
725 -)))
739 +[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
726 726  
727 727  
728 728  R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Remote Access Gateway.WebHome]]**
... ... @@ -730,8 +730,9 @@
730 730  [[image:1652429624400-864.png||height="432" width="716"]]
731 731  
732 732  
733 -=== 5.5.8 System ~-~-> Firmware Upgrade ===
734 734  
748 +=== 5.5.8  System ~-~-> Firmware Upgrade ===
749 +
735 735  We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
736 736  
737 737  * **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
... ... @@ -738,10 +738,12 @@
738 738  
739 739  ( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]] )
740 740  
756 +
741 741  * **Change Log**: [[Firmware Change Log>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]].
742 742  
743 743  ( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
744 744  
761 +
745 745  (((
746 746  The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
747 747  )))
... ... @@ -752,11 +752,18 @@
752 752  
753 753  [[image:1652429711145-862.png||height="270" width="737"]]
754 754  
772 +
773 +(((
755 755  Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
775 +)))
756 756  
777 +(((
757 757  (% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
779 +)))
758 758  
781 +(((
759 759  The system will automatically boot into the new firmware after upgrade.
783 +)))
760 760  
761 761  [[image:1652429962190-224.png||height="358" width="729"]]
762 762  
... ... @@ -766,18 +766,22 @@
766 766  
767 767  (% style="color:#4f81bd" %)**//root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
768 768  
793 +
769 769  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
770 770  
771 771  
772 -=== 5.5.9 System ~-~-> Reboot/Reset ===
773 773  
798 +=== 5.5.9  System ~-~-> Reboot/Reset ===
799 +
774 774  [[image:1652430197132-330.png||height="256" width="724"]]
775 775  
776 776  (((
777 777  
804 +
805 +
778 778  )))
779 779  
780 -=== 5.5.10 System ~-~-> Package Maintain ===
808 +=== 5.5.10  System ~-~-> Package Maintain ===
781 781  
782 782  [[image:1652430243826-126.png||height="289" width="723"]]
783 783  
... ... @@ -784,52 +784,45 @@
784 784  Place to show what package has installed and possible to upgrade packages.
785 785  
786 786  
787 -== 5.6 LogRead ==
788 788  
789 -=== 5.6.1 LogRead ~-~-> LoRa Log ===
816 +== 5.6  LogRead ==
790 790  
818 +=== 5.6.1  LogRead ~-~-> LoRa Log ===
791 791  
792 792  Show the frequency for LoRa Radio and traffics.
793 793  
794 -[[image:image-20220615204306-1.png||height="575" width="733"]]
822 +[[image:1657069890320-513.png]]
795 795  
796 796  
797 -Show the IoT Server Connection State and FWD State
798 798  
799 -[[image:image-20220616083933-1.png||height="556" width="729"]]
800 800  
801 -DLOS8 can view GPS location in the Logread FWD State
827 +=== 5.6.2  LogRead ~-~-> System Log ===
802 802  
829 +Show the system log
803 803  
804 -Show the Error logs, RxTxJson lorawan packages, and PULL State
831 +[[image:1657069922599-794.png]]
805 805  
806 -[[image:image-20220615205416-6.png||height="442" width="884"]]
807 807  
808 808  
809 -=== 5.6.2 LogRead ~-~-> System Log ===
835 += 6.  More features =
810 810  
811 -Show the system log
837 +== 6.1  More instructions ==
812 812  
813 -[[image:1652430369760-511.png||height="373" width="730"]]
814 -
815 -= 6. More features =
816 -
817 -== 6.1 More instructions ==
818 -
819 819  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
820 820  
821 821  
822 -= 7. Linux System =
823 823  
824 -The DLOS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
843 += 7.  Linux System =
825 825  
845 +The LG308N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
826 826  
827 -== 7.1 SSH Access for Linux console ==
828 828  
829 -User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
848 +== 7.1  SSH Access for Linux console ==
830 830  
831 -IP address:  IP address of DLOS8N
850 +User can access the Linux console via the SSH protocol. Make sure your PC and the LG308N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
832 832  
852 +IP address:  IP address of LG308N
853 +
833 833  Port:         22 (via WiFi AP mode) or 2222 (via WAN Interface)
834 834  
835 835  User Name:      (% style="color:green" %)**root**
... ... @@ -836,19 +836,22 @@
836 836  
837 837  Password:         (% style="color:green" %)**dragino** (% style="color:black" %)(default)
838 838  
860 +
839 839  After logging in, you will be in the Linux console and can enter commands as shown below.
840 840  
841 841  [[image:1652431588565-830.png]]
842 842  
865 +
843 843  The “(% class="mark" %)**logread -f**(%%)” command can be used to debug how system runs.
844 844  
845 -[[image:1652431609193-637.png||height="214" width="732"]]
868 +[[image:1657070133275-283.png]]
846 846  
847 847  
848 -== 7.2 Edit and Transfer files ==
849 849  
872 +== 7.2  Edit and Transfer files ==
873 +
850 850  (((
851 -The DLOS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
875 +The LG308N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
852 852  )))
853 853  
854 854  (((
... ... @@ -856,7 +856,7 @@
856 856  )))
857 857  
858 858  (((
859 -After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the DLOS8N, or edit the files directly in the windows.
883 +After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the LG308N, or edit the files directly in the windows.
860 860  )))
861 861  
862 862  (((
... ... @@ -866,25 +866,25 @@
866 866  [[image:1652431650755-450.png]]
867 867  
868 868  
869 -== 7.3 File System ==
893 +== 7.3  File System ==
870 870  
871 871  (((
872 -The DLOS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
873 -)))
874 -
875 875  (((
876 -The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the DLOS8N flash.
897 +The LG308N has a 16MB flash and a 64MB RAM. The /var and /tmp directory are in the RAM, contents stored in /tmp and /var will be erased after reboot the device. Other directories are in the flash and will keep after reboot.
877 877  )))
878 878  
900 +
879 879  (((
880 -You can use an external USB flash memory device to extend the size of flash memory for storage.
902 +The Linux system use around 8MB ~~10MB flash size which means there is not much room for user to store data in the LG308N flash. User can use an external USB flash to extend the size for storage.
881 881  )))
904 +)))
882 882  
883 883  
884 -== 7.4 Package maintenance system ==
885 885  
886 -DLOS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
908 +== 7.4  Package maintenance system ==
887 887  
910 +LG308N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
911 +
888 888  (((
889 889  Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
890 890  )))
... ... @@ -934,15 +934,19 @@
934 934  
935 935  (((
936 936  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
961 +
962 +
963 +
937 937  )))
938 938  
939 -= 8. Upgrade Linux Firmware =
966 += 8.  Upgrade Linux Firmware =
940 940  
941 941  
942 -= 9. FAQ =
943 943  
944 -== 9.1 How can I configure for a customized frequency band? ==
970 += 9.  FAQ =
945 945  
972 +== 9.1  How can I configure for a customized frequency band? ==
973 +
946 946  (((
947 947  See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
948 948  )))
... ... @@ -951,15 +951,15 @@
951 951  
952 952  )))
953 953  
954 -== 9.2 Can I connect DLOS8N to LORIOT? ==
982 +== 9.2  Can I connect LG308N to LORIOT? ==
955 955  
956 956  Yes, the set up instruction is here: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
957 957  
958 958  
959 -== 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
987 +== 9.3  Can I make my own firmware for the gateway, where can I find the source code? ==
960 960  
961 961  (((
962 -Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
990 +Yes, You can make your own firmware for the LG308N for branding purposes or to add customized applications.
963 963  )))
964 964  
965 965  (((
... ... @@ -967,11 +967,37 @@
967 967  )))
968 968  
969 969  
970 -== 9.4 Can I use 868Mhz version for 915Mhz bands? ==
998 +== 9.4  Can I use 868Mhz version for 915Mhz bands? ==
971 971  
972 972  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
973 973  
974 974  
1003 +== 9.5  Can I control the LEDs? ==
1004 +
1005 +Except the PWR LED is controlled by +3v3 power directly. All other LEDs can be controlled by developer.
1006 +
1007 +
1008 +(% style="color:blue" %)**Control Globe LED:**
1009 +
1010 +ON: echo 1 > /sys/class/leds/dragino2\:red\:wlan/brightness 
1011 +
1012 +OFF: echo 0 > /sys/class/leds/dragino2\:red\:wlan/brightness
1013 +
1014 +
1015 +(% style="color:blue" %)**Control HEART LED:**
1016 +
1017 +First export the gpio27 and set to out
1018 +
1019 +echo 27 > /sys/class/gpio/export
1020 +
1021 +echo out > /sys/class/gpio/gpio27/direction
1022 +
1023 +ON: echo 0 > /sys/class/gpio/gpio27/value
1024 +
1025 +OFF: echo 1 > /sys/class/gpio/gpio27/value
1026 +
1027 +
1028 +
975 975  = 10. Trouble Shooting =
976 976  
977 977  == 10.1 I get kernel error when install new package, how to fix? ==
... ... @@ -997,8 +997,9 @@
997 997  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
998 998  
999 999  
1000 -== 10.2 How to recover the DLOS8N if the firmware crashes ==
1001 1001  
1055 +== 10.2  How to recover the LG308N if the firmware crashes ==
1056 +
1002 1002  (((
1003 1003  Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
1004 1004  )))
... ... @@ -1007,12 +1007,12 @@
1007 1007  
1008 1008  )))
1009 1009  
1010 -== 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
1065 +== 10.3 I configured LG308N for WiFi access and lost its IP. What to do now? ==
1011 1011  
1012 -[[image:1652435238615-272.png||height="247" width="727"]]
1067 +[[image:1657071488240-907.png]]
1013 1013  
1014 1014  (((
1015 -The DLOS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access DLOS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
1070 +The LG308N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access LG308N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
1016 1016  )))
1017 1017  
1018 1018  (% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
... ... @@ -1020,37 +1020,37 @@
1020 1020  
1021 1021  Steps to connect via fall back IP:
1022 1022  
1023 -~1. Connect PC’s Ethernet port to DLOS8N’s WAN port
1078 +~1. Connect PC's Ethernet port to LG01's LAN port
1024 1024  
1025 -2. Configure PC’s Ethernet port has
1026 - IP: 172.31.255.253 and
1027 - Netmask: 255.255.255.252
1080 +2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
1028 1028  
1029 1029  As below photo:
1030 1030  
1031 1031  [[image:1652435256286-879.png]]
1032 1032  
1033 -3. In the PC, use IP address 172.31.255.254 to access the DLOS8N via Web or Console.
1086 +3. In PC, use 172.31.255.254 to access LG308N via Web or Console.
1034 1034  
1035 -Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1036 1036  
1037 1037  
1038 1038  = 11. Order Info =
1039 1039  
1040 -(% style="color:#4f81bd" %) **//PART: DLOS8N-XXX-YYY//: **
1041 1041  
1042 -(% style="color:#4f81bd" %) **//XXX: Frequency Band//**
1093 +(% style="color:#4f81bd" %)**//PART: DLOS8N-XXX-YYY//: **
1043 1043  
1044 -* (% style="color:#4f81bd" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1045 -* (% style="color:#4f81bd" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1095 +(% style="color:#4f81bd" %)**//XXX: Frequency Band//**
1046 1046  
1047 -(% style="color:#4f81bd" %) **//YYY: 4G Cellular Option//**
1097 +* (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1098 +* (% style="color:red" %)** 915**(% style="color:black" %):  valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1048 1048  
1049 -* (% style="color:#4f81bd" %)** E**(% style="color:black" %): EMEA, Korea, Thailand, India.
1050 -* (% style="color:#4f81bd" %)** A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
1051 -* (% style="color:#4f81bd" %)** AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1052 -* (% style="color:#4f81bd" %)** J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
1100 +(% style="color:#4f81bd" %)
1053 1053  
1102 +(% style="color:#4f81bd" %)**//YYY: 4G Cellular Option//**
1103 +
1104 +* (% style="color:red" %)** EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1105 +* (% style="color:red" %)** EC25-A**(% style="color:black" %):  North America/ Rogers/AT&T/T-Mobile.
1106 +* (% style="color:red" %)** EC25-AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1107 +* (% style="color:red" %)** EC25-J**(% style="color:black" %):  Japan, DOCOMO/SoftBank/ KDDI
1108 +
1054 1054  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1055 1055  
1056 1056  
... ... @@ -1057,14 +1057,19 @@
1057 1057  = 12. Packing Info =
1058 1058  
1059 1059  (((
1115 +
1116 +
1060 1060  **Package Includes**:
1061 -)))
1062 1062  
1063 -* DLOS8N LoRaWAN Gateway x 1
1064 -* Stick Antenna for LoRa RF part. Frequency is one of 470 or 868 or 915Mhz depends the model ordered
1119 +* LG308N or LG08 LoRa Gateway x 1
1120 +* Stick Antenna for LoRa RF part. Frequency is one of 433 or 868 or 915Mhz depends the model ordered
1121 +* Power Adapter: EU/AU/US type power adapter depends on country to be used
1065 1065  * Packaging with environmental protection paper box
1123 +)))
1066 1066  
1067 1067  (((
1126 +
1127 +
1068 1068  **Dimension and weight**:
1069 1069  )))
1070 1070  
... ... @@ -1073,6 +1073,8 @@
1073 1073  * Package Size: 49 x 19.5 x x 19Package Size: 4912 cm
1074 1074  * Weight: 2.5kg
1075 1075  
1136 +
1137 +
1076 1076  = 13. Support =
1077 1077  
1078 1078  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1657069890320-513.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +63.2 KB
Content
1657069922599-794.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +58.2 KB
Content
1657070133275-283.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +221.0 KB
Content
1657071488240-907.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +60.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0