Last modified by Kilight Cao on 2025/02/07 08:57
<
From version < 118.5 >
edited by Xiaoling
on 2022/07/05 18:07
To version < 123.18 >
edited by Xiaoling
on 2022/07/06 10:11
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -50,7 +50,7 @@
50 50  == 1.2  Specifications ==
51 51  
52 52  
53 -**Hardware System:**
53 +(% style="color:#037691" %)**Hardware System:**
54 54  
55 55  (((
56 56   Linux Part:
... ... @@ -60,7 +60,7 @@
60 60  * 64MB RAM
61 61  * 16MB Flash
62 62  
63 -**Interface:**
63 +(% style="color:#037691" %)**Interface:**
64 64  
65 65  * 10M/100M RJ45 Ports x 2
66 66  * WiFi : 802.11 b/g/n
... ... @@ -71,7 +71,7 @@
71 71  * Mini-PCI E connector x 1
72 72  * SX1302 + 2 x SX1250
73 73  
74 -**WiFi Spec:**
74 +(% style="color:#037691" %)**WiFi Spec:**
75 75  
76 76  * IEEE 802.11 b/g/n
77 77  * Frequency Band: 2.4 ~~ 2.462GHz
... ... @@ -84,7 +84,7 @@
84 84  ** 11g 54M : -71dbm
85 85  ** 11n 20M : -67dbm
86 86  
87 -**LoRa Spec:**
87 +(% style="color:#037691" %)**LoRa Spec:**
88 88  
89 89  * Up to -142.5 dBm sensitivity with SX1250 Tx/Rx front-end
90 90  * 70 dB CW interferer rejection at 1 MHz offset
... ... @@ -95,7 +95,7 @@
95 95  * Dynamic data-rate (DDR) adaptation
96 96  * True antenna diversity or simultaneous dual-band operation
97 97  
98 -**Cellular 4G LTE (optional):**
98 +(% style="color:#037691" %)**Cellular 4G LTE (optional):**
99 99  
100 100  * Quectel: [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
101 101  * Standard Size SIM Slot
... ... @@ -104,9 +104,11 @@
104 104  * Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
105 105  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
106 106  
107 -== 1.3  Features ==
108 108  
109 109  
109 +
110 +== 1.3  Features ==
111 +
110 110  * Open Source Linux system
111 111  * Managed by Web GUI, SSH via LAN or WiFi
112 112  * Emulates 49x LoRa demodulators
... ... @@ -113,6 +113,9 @@
113 113  * LoRaWAN Gateway
114 114  * 10 programmable parallel demodulation paths
115 115  
118 +
119 +
120 +
116 116  == 1.4  Hardware System Structure ==
117 117  
118 118  [[image:1657011152828-178.png]]
... ... @@ -128,17 +128,19 @@
128 128  
129 129  LG308N has totally 6 LEDs, They are:
130 130  
131 -* **Power LED **[[image:image-20220705165446-1.png||height="21" width="22"]] : This (% style="color:red" %)**LED**(%%) will be **solid on** if the device is properly powered.
132 -* **HEART LED **[[image:image-20220705165446-2.png||height="19" width="18"]] : No function yet. 
133 -* **SYS LED** [[image:image-20220705165446-3.png||height="20" width="19"]] :  This** LED** will shows different colors on different state:
136 +* **Power LED  **[[image:image-20220705165446-1.png||height="15" width="16"]] : This (% style="color:red" %)**LED**(%%) will be **solid on** if the device is properly powered.
137 +* **HEART LED **[[image:image-20220705165446-2.png||height="16" width="15"]] : No function yet. 
138 +* **SYS LED** [[image:image-20220705165446-3.png||height="16" width="15"]] :  This** LED** will shows different colors on different state:
134 134  ** (% style="color:red" %)**SOLID**(%%):  Device is alive with LoRaWAN server connection.
135 135  ** (% style="color:red" %)**BLINKING**(%%)**:**  a) Device has internet connection but no LoRaWAN Connection.  or  b) Device is in booting stage, in this stage, it will (% style="color:red" %)**BLINKING**(%%)** **for several seconds.
136 136  ** (% style="color:red" %)**OFF**(%%):  Device doesn't have Internet connection.
137 137  
138 -* **ETH LED**[[image:image-20220705165446-4.png||height="19" width="22"]] [[image:image-20220705165446-5.png||height="18" width="20"]] : These two LEDs show the ETH interfaces connection status.
139 -* **WiFi LED** [[image:image-20220705165446-6.png||height="19" width="19"]]** **:  This LED shows the WiFi interface connection status.
143 +* **ETH LED** [[image:image-20220705165446-5.png||height="15" width="17"]] [[image:image-20220705165446-5.png||height="15" width="17"]]: These two LEDs show the ETH interfaces connection status.
144 +* **WiFi LED** [[image:image-20220705165446-6.png||height="15" width="15"]]** **:  This LED shows the WiFi interface connection status.
140 140  
146 +(((
141 141  (% style="color:red" %)**Note: Above LED indication are for firmware version > LG02_LG08~-~-build-v5.3.1584002217-20200312-1639**
148 +)))
142 142  
143 143  
144 144  (((
... ... @@ -149,7 +149,7 @@
149 149  
150 150  = 2.  Access and Configure LG308N =
151 151  
152 -The LG308N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
159 +The LG308N is configured as a WiFi Access Point by default. User can access and configure the LG308N after connecting to its WiFi network, or via its Ethernet port.
153 153  
154 154  
155 155  == 2.1  Find IP address of LG308N ==
... ... @@ -242,7 +242,6 @@
242 242  LG308N supports flexible network set up for different environment. This section describes the typical network topology can be set in LG308N. The typical network set up includes:
243 243  )))
244 244  
245 -
246 246  * **WAN Port Internet Mode**
247 247  * **WiFi Client Mode**
248 248  * **WiFi AP Mode**
... ... @@ -249,9 +249,11 @@
249 249  * **Cellular Mode**
250 250  
251 251  
258 +
259 +
252 252  == 3.2  Use WAN port to access Internet ==
253 253  
254 -By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N’s WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
262 +By default, the LG308N is set to use the WAN port to connect to an upstream network. When you connect the LG308N's WAN port to an upstream router, LG308N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
255 255  
256 256  [[image:1657012559318-672.png]]
257 257  
... ... @@ -329,11 +329,15 @@
329 329  == 4.1  Create a gateway in TTN V3 Server ==
330 330  
331 331  
340 +(((
332 332  (% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
342 +)))
333 333  
334 334  (((
345 +(((
335 335  Every LG308N has a unique gateway id. The ID can be found at LoRaWAN page:
336 336  )))
348 +)))
337 337  
338 338  (((
339 339  [[image:1657013108723-531.png]]
... ... @@ -359,12 +359,12 @@
359 359  
360 360  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
361 361  
374 +
362 362  * Europe 1 (% style="color:red" %)**corresponding Gateway server address:** (% style="color:black" %)eu1.cloud.thethings.network
363 363  * North America 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)nam1.cloud.thethings.network
364 364  * Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
365 365  * Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
366 366  
367 -
368 368  (% style="color:#4f81bd" %)**Step 4: Create a Gateway**
369 369  
370 370  [[image:1652422440891-514.png||height="360" width="747"]]
... ... @@ -388,7 +388,7 @@
388 388  [[image:1652422509034-682.png||height="299" width="739"]]
389 389  
390 390  
391 -== 4.2  Configure DLOS8N to connect to TTN v3 ==
403 +== 4.2  Configure LG308N to connect to TTN v3 ==
392 392  
393 393  (((
394 394  You can now configure the LG308N to let it connect to TTN network V3.
... ... @@ -585,7 +585,7 @@
585 585  
586 586  (% style="color:red" %)**Note:**
587 587  
588 -~*: User can ignore the latitude and longitude settings here, DLOS8N will use the actually value from GPS module.
600 +~*: User can ignore the latitude and longitude settings here, LG308N will use the actually value from GPS module.
589 589  
590 590  ~**: Packet filter is to drop the unwanted LoRaWAN packet, instruction see here:
591 591  
... ... @@ -618,27 +618,33 @@
618 618  [[image:1652428648903-878.png||height="266" width="731"]]
619 619  
620 620  
621 -== 5.4 MQTT Settings ==
633 +== 5.4  MQTT Settings ==
622 622  
623 -If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
635 +(((
636 +If end nodes works in ABP mode, user can configure LG308N to transfer the data to MQTT broker,
637 +)))
624 624  
639 +(((
625 625  Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
641 +)))
626 626  
627 627  
628 628  [[image:1652428705046-212.png||height="417" width="733"]]
629 629  
630 630  
631 -== 5.5 System ==
632 632  
633 -=== 5.5.1 System ~-~-> System Overview ===
648 +== 5.5  System ==
634 634  
650 +=== 5.5.1  System ~-~-> System Overview ===
651 +
635 635  Shows the system info:
636 636  
637 637  [[image:1652428773760-580.png||height="408" width="728"]]
638 638  
639 639  
640 -=== 5.5.2 System ~-~-> General ( login settings) ===
641 641  
658 +=== 5.5.2  System ~-~-> General ( login settings) ===
659 +
642 642  [[image:1652428861256-300.png||height="354" width="724"]]
643 643  
644 644  (((
... ... @@ -646,7 +646,7 @@
646 646  )))
647 647  
648 648  (((
649 -There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
667 +There are two login for DLOS8: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
650 650  )))
651 651  
652 652  (((
... ... @@ -654,56 +654,60 @@
654 654  )))
655 655  
656 656  (((
657 -**__Timezone:__**Set device timezone.
675 +**__Timezone: __**Set device timezone.
658 658  )))
659 659  
660 660  (((
661 -**__Port forwarding:__**Enable/Disable the HTTP and SSH access via WAN interface.
679 +**__Port forwarding: __**Enable/Disable the HTTP and SSH access via WAN interface.
662 662  
681 +
663 663  
664 664  )))
665 665  
666 -=== 5.5.3 System ~-~-> Network ===
685 +=== 5.5.3  System ~-~-> Network ===
667 667  
668 668  [[image:1652429149053-824.png||height="467" width="725"]]
669 669  
670 670  (((
671 -**__LAN Settings:__**When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
690 +**__LAN Settings:  __**When the LG308N has the AP enable, LAN settings specify the network info for LG308N's own network.
672 672  )))
673 673  
674 674  (((
675 -__**WAN Settings:**__Setting for DLOS8N WAN port
694 +__**WAN Settings: **__Setting for LG308N WAN port
676 676  )))
677 677  
678 678  (((
679 -__**WiFi Settings:**__Setting for DLOS8N WiFi IP when use it as WiFi Client
680 -
681 -
698 +__**WiFi Settings:  **__Setting for LG308N WiFi IP when use it as WiFi Client
682 682  )))
683 683  
684 -=== 5.5.4 System ~-~-> WiFi ===
685 685  
686 -DLOS8N WiFi Settings.
687 687  
703 +=== 5.5.4  System ~-~-> WiFi ===
704 +
705 +LG308N WiFi Settings.
706 +
688 688  [[image:1652429430767-921.png||height="367" width="723"]]
689 689  
690 690  
691 -=== 5.5.5 System ~-~-> Cellular ===
692 692  
711 +=== 5.5.5  System ~-~-> Cellular ===
712 +
693 693  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
694 694  
695 695  [[image:1652429309615-825.png||height="320" width="732"]]
696 696  
697 -(% style="color:red" %)Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
717 +(% style="color:red" %)Note *: For LG308N which doesn't have the cellular module, this page will shows Cellular not detected.
698 698  
699 699  
700 -=== 5.5.6 System ~-~-> Network Status ===
701 701  
721 +=== 5.5.6  System ~-~-> Network Status ===
722 +
702 702  [[image:1652429486609-208.png||height="415" width="728"]]
703 703  
704 704  
705 -=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
706 706  
727 +=== 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
728 +
707 707  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
708 708  
709 709  [[image:1652429518191-846.png||height="332" width="733"]]
... ... @@ -714,9 +714,7 @@
714 714  
715 715  Please see this document for detail:
716 716  
717 -(((
718 -[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
719 -)))
739 +[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
720 720  
721 721  
722 722  R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Remote Access Gateway.WebHome]]**
... ... @@ -724,8 +724,9 @@
724 724  [[image:1652429624400-864.png||height="432" width="716"]]
725 725  
726 726  
727 -=== 5.5.8 System ~-~-> Firmware Upgrade ===
728 728  
748 +=== 5.5.8  System ~-~-> Firmware Upgrade ===
749 +
729 729  We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
730 730  
731 731  * **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
... ... @@ -732,10 +732,12 @@
732 732  
733 733  ( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]] )
734 734  
756 +
735 735  * **Change Log**: [[Firmware Change Log>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]].
736 736  
737 737  ( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
738 738  
761 +
739 739  (((
740 740  The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
741 741  )))
... ... @@ -746,6 +746,7 @@
746 746  
747 747  [[image:1652429711145-862.png||height="270" width="737"]]
748 748  
772 +
749 749  Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
750 750  
751 751  (% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
... ... @@ -760,18 +760,22 @@
760 760  
761 761  (% style="color:#4f81bd" %)**//root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
762 762  
787 +
763 763  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
764 764  
765 765  
766 -=== 5.5.9 System ~-~-> Reboot/Reset ===
767 767  
792 +=== 5.5.9  System ~-~-> Reboot/Reset ===
793 +
768 768  [[image:1652430197132-330.png||height="256" width="724"]]
769 769  
770 770  (((
771 771  
798 +
799 +
772 772  )))
773 773  
774 -=== 5.5.10 System ~-~-> Package Maintain ===
802 +=== 5.5.10  System ~-~-> Package Maintain ===
775 775  
776 776  [[image:1652430243826-126.png||height="289" width="723"]]
777 777  
... ... @@ -778,52 +778,45 @@
778 778  Place to show what package has installed and possible to upgrade packages.
779 779  
780 780  
781 -== 5.6 LogRead ==
782 782  
783 -=== 5.6.1 LogRead ~-~-> LoRa Log ===
810 +== 5.6  LogRead ==
784 784  
812 +=== 5.6.1  LogRead ~-~-> LoRa Log ===
785 785  
786 786  Show the frequency for LoRa Radio and traffics.
787 787  
788 -[[image:image-20220615204306-1.png||height="575" width="733"]]
816 +[[image:1657069890320-513.png]]
789 789  
790 790  
791 -Show the IoT Server Connection State and FWD State
792 792  
793 -[[image:image-20220616083933-1.png||height="556" width="729"]]
794 794  
795 -DLOS8 can view GPS location in the Logread FWD State
821 +=== 5.6.2  LogRead ~-~-> System Log ===
796 796  
823 +Show the system log
797 797  
798 -Show the Error logs, RxTxJson lorawan packages, and PULL State
825 +[[image:1657069922599-794.png]]
799 799  
800 -[[image:image-20220615205416-6.png||height="442" width="884"]]
801 801  
802 802  
803 -=== 5.6.2 LogRead ~-~-> System Log ===
829 += 6.  More features =
804 804  
805 -Show the system log
831 +== 6.1  More instructions ==
806 806  
807 -[[image:1652430369760-511.png||height="373" width="730"]]
808 -
809 -= 6. More features =
810 -
811 -== 6.1 More instructions ==
812 -
813 813  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
814 814  
815 815  
816 -= 7. Linux System =
817 817  
818 -The DLOS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
837 += 7.  Linux System =
819 819  
839 +The LG308N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
820 820  
821 -== 7.1 SSH Access for Linux console ==
822 822  
823 -User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
842 +== 7.1  SSH Access for Linux console ==
824 824  
825 -IP address:  IP address of DLOS8N
844 +User can access the Linux console via the SSH protocol. Make sure your PC and the LG308N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
826 826  
846 +IP address:  IP address of LG308N
847 +
827 827  Port:         22 (via WiFi AP mode) or 2222 (via WAN Interface)
828 828  
829 829  User Name:      (% style="color:green" %)**root**
... ... @@ -830,19 +830,22 @@
830 830  
831 831  Password:         (% style="color:green" %)**dragino** (% style="color:black" %)(default)
832 832  
854 +
833 833  After logging in, you will be in the Linux console and can enter commands as shown below.
834 834  
835 835  [[image:1652431588565-830.png]]
836 836  
859 +
837 837  The “(% class="mark" %)**logread -f**(%%)” command can be used to debug how system runs.
838 838  
839 -[[image:1652431609193-637.png||height="214" width="732"]]
862 +[[image:1657070133275-283.png]]
840 840  
841 841  
842 -== 7.2 Edit and Transfer files ==
843 843  
866 +== 7.2  Edit and Transfer files ==
867 +
844 844  (((
845 -The DLOS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
869 +The LG308N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
846 846  )))
847 847  
848 848  (((
... ... @@ -850,7 +850,7 @@
850 850  )))
851 851  
852 852  (((
853 -After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the DLOS8N, or edit the files directly in the windows.
877 +After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the LG308N, or edit the files directly in the windows.
854 854  )))
855 855  
856 856  (((
... ... @@ -860,25 +860,25 @@
860 860  [[image:1652431650755-450.png]]
861 861  
862 862  
863 -== 7.3 File System ==
887 +== 7.3  File System ==
864 864  
865 865  (((
866 -The DLOS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
867 -)))
868 -
869 869  (((
870 -The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the DLOS8N flash.
891 +The LG308N has a 16MB flash and a 64MB RAM. The /var and /tmp directory are in the RAM, contents stored in /tmp and /var will be erased after reboot the device. Other directories are in the flash and will keep after reboot.
871 871  )))
872 872  
894 +
873 873  (((
874 -You can use an external USB flash memory device to extend the size of flash memory for storage.
896 +The Linux system use around 8MB ~~10MB flash size which means there is not much room for user to store data in the LG308N flash. User can use an external USB flash to extend the size for storage.
875 875  )))
898 +)))
876 876  
877 877  
878 -== 7.4 Package maintenance system ==
879 879  
880 -DLOS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
902 +== 7.4  Package maintenance system ==
881 881  
904 +LG308N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
905 +
882 882  (((
883 883  Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
884 884  )))
... ... @@ -928,15 +928,19 @@
928 928  
929 929  (((
930 930  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
955 +
956 +
957 +
931 931  )))
932 932  
933 -= 8. Upgrade Linux Firmware =
960 += 8.  Upgrade Linux Firmware =
934 934  
935 935  
936 -= 9. FAQ =
937 937  
938 -== 9.1 How can I configure for a customized frequency band? ==
964 += 9.  FAQ =
939 939  
966 +== 9.1  How can I configure for a customized frequency band? ==
967 +
940 940  (((
941 941  See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
942 942  )))
... ... @@ -945,15 +945,15 @@
945 945  
946 946  )))
947 947  
948 -== 9.2 Can I connect DLOS8N to LORIOT? ==
976 +== 9.2  Can I connect DLOS8N to LORIOT? ==
949 949  
950 950  Yes, the set up instruction is here: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
951 951  
952 952  
953 -== 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
981 +== 9.3  Can I make my own firmware for the gateway, where can I find the source code? ==
954 954  
955 955  (((
956 -Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
984 +Yes, You can make your own firmware for the LG308N for branding purposes or to add customized applications.
957 957  )))
958 958  
959 959  (((
... ... @@ -961,11 +961,37 @@
961 961  )))
962 962  
963 963  
964 -== 9.4 Can I use 868Mhz version for 915Mhz bands? ==
992 +== 9.4  Can I use 868Mhz version for 915Mhz bands? ==
965 965  
966 966  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
967 967  
968 968  
997 +== 9.5  Can I control the LEDs? ==
998 +
999 +Except the PWR LED is controlled by +3v3 power directly. All other LEDs can be controlled by developer.
1000 +
1001 +
1002 +(% style="color:blue" %)**Control Globe LED:**
1003 +
1004 +ON: echo 1 > /sys/class/leds/dragino2\:red\:wlan/brightness 
1005 +
1006 +OFF: echo 0 > /sys/class/leds/dragino2\:red\:wlan/brightness
1007 +
1008 +
1009 +(% style="color:blue" %)**Control HEART LED:**
1010 +
1011 +First export the gpio27 and set to out
1012 +
1013 +echo 27 > /sys/class/gpio/export
1014 +
1015 +echo out > /sys/class/gpio/gpio27/direction
1016 +
1017 +ON: echo 0 > /sys/class/gpio/gpio27/value
1018 +
1019 +OFF: echo 1 > /sys/class/gpio/gpio27/value
1020 +
1021 +
1022 +
969 969  = 10. Trouble Shooting =
970 970  
971 971  == 10.1 I get kernel error when install new package, how to fix? ==
... ... @@ -991,8 +991,9 @@
991 991  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
992 992  
993 993  
994 -== 10.2 How to recover the DLOS8N if the firmware crashes ==
995 995  
1049 +== 10.2  How to recover the LG308N if the firmware crashes ==
1050 +
996 996  (((
997 997  Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
998 998  )))
... ... @@ -1001,12 +1001,12 @@
1001 1001  
1002 1002  )))
1003 1003  
1004 -== 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
1059 +== 10.3 I configured LG308N for WiFi access and lost its IP. What to do now? ==
1005 1005  
1006 -[[image:1652435238615-272.png||height="247" width="727"]]
1061 +[[image:1657071488240-907.png]]
1007 1007  
1008 1008  (((
1009 -The DLOS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access DLOS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
1064 +The LG308N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access LG308N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
1010 1010  )))
1011 1011  
1012 1012  (% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
... ... @@ -1014,37 +1014,37 @@
1014 1014  
1015 1015  Steps to connect via fall back IP:
1016 1016  
1017 -~1. Connect PC’s Ethernet port to DLOS8N’s WAN port
1072 +~1. Connect PC's Ethernet port to LG01's LAN port
1018 1018  
1019 -2. Configure PC’s Ethernet port has
1020 - IP: 172.31.255.253 and
1021 - Netmask: 255.255.255.252
1074 +2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
1022 1022  
1023 1023  As below photo:
1024 1024  
1025 1025  [[image:1652435256286-879.png]]
1026 1026  
1027 -3. In the PC, use IP address 172.31.255.254 to access the DLOS8N via Web or Console.
1080 +3. In PC, use 172.31.255.254 to access LG308N via Web or Console.
1028 1028  
1029 -Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1030 1030  
1031 1031  
1032 1032  = 11. Order Info =
1033 1033  
1034 -(% style="color:#4f81bd" %) **//PART: DLOS8N-XXX-YYY//: **
1035 1035  
1036 -(% style="color:#4f81bd" %) **//XXX: Frequency Band//**
1087 +(% style="color:#4f81bd" %)**//PART: DLOS8N-XXX-YYY//: **
1037 1037  
1038 -* (% style="color:#4f81bd" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1039 -* (% style="color:#4f81bd" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1089 +(% style="color:#4f81bd" %)**//XXX: Frequency Band//**
1040 1040  
1041 -(% style="color:#4f81bd" %) **//YYY: 4G Cellular Option//**
1091 +* (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1092 +* (% style="color:red" %)** 915**(% style="color:black" %):  valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1042 1042  
1043 -* (% style="color:#4f81bd" %)** E**(% style="color:black" %): EMEA, Korea, Thailand, India.
1044 -* (% style="color:#4f81bd" %)** A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
1045 -* (% style="color:#4f81bd" %)** AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1046 -* (% style="color:#4f81bd" %)** J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
1094 +(% style="color:#4f81bd" %)
1047 1047  
1096 +(% style="color:#4f81bd" %)**//YYY: 4G Cellular Option//**
1097 +
1098 +* (% style="color:red" %)** EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1099 +* (% style="color:red" %)** EC25-A**(% style="color:black" %):  North America/ Rogers/AT&T/T-Mobile.
1100 +* (% style="color:red" %)** EC25-AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1101 +* (% style="color:red" %)** EC25-J**(% style="color:black" %):  Japan, DOCOMO/SoftBank/ KDDI
1102 +
1048 1048  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1049 1049  
1050 1050  
... ... @@ -1051,14 +1051,19 @@
1051 1051  = 12. Packing Info =
1052 1052  
1053 1053  (((
1109 +
1110 +
1054 1054  **Package Includes**:
1055 -)))
1056 1056  
1057 -* DLOS8N LoRaWAN Gateway x 1
1058 -* Stick Antenna for LoRa RF part. Frequency is one of 470 or 868 or 915Mhz depends the model ordered
1113 +* LG308N or LG08 LoRa Gateway x 1
1114 +* Stick Antenna for LoRa RF part. Frequency is one of 433 or 868 or 915Mhz depends the model ordered
1115 +* Power Adapter: EU/AU/US type power adapter depends on country to be used
1059 1059  * Packaging with environmental protection paper box
1117 +)))
1060 1060  
1061 1061  (((
1120 +
1121 +
1062 1062  **Dimension and weight**:
1063 1063  )))
1064 1064  
... ... @@ -1067,6 +1067,8 @@
1067 1067  * Package Size: 49 x 19.5 x x 19Package Size: 4912 cm
1068 1068  * Weight: 2.5kg
1069 1069  
1130 +
1131 +
1070 1070  = 13. Support =
1071 1071  
1072 1072  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1657069890320-513.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +63.2 KB
Content
1657069922599-794.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +58.2 KB
Content
1657070133275-283.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +221.0 KB
Content
1657071488240-907.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +60.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0