Changes for page LG308N -- LoRaWAN Gateway User Manual

Last modified by Kilight Cao on 2025/02/07 08:57

From version < 118.1 >

edited by Xiaoling
on 2022/07/05 17:55

To version < 127.3 >

edited by Xiaoling
on 2022/07/29 14:43

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)
Attachments (0 modified, 5 added, 0 removed)

Details

Page properties

Content

@@ -6,6 +6,7 @@
  **Table of Contents：**
++{{toc/}}
@@ -17,8 +17,10 @@
++
  = 1.  Introduction =
++
  == 1.1  What is the LG308N ==
@@ -47,10 +47,11 @@
  [[image:1657010949218-224.png]]
++
  == 1.2  Specifications ==
--**Hardware System:**
++(% style="color:#037691" %)**Hardware System:**
  (((
           Linux Part:
@@ -60,8 +60,10 @@
  * 64MB RAM
  * 16MB Flash
--**Interface:**
++
++(% style="color:#037691" %)**Interface:**
++
  * 10M/100M RJ45 Ports x 2
  * WiFi : 802.11 b/g/n
  * LoRaWAN Wireless
@@ -71,8 +71,10 @@
  * Mini-PCI E connector x 1
  * SX1302 + 2 x SX1250
--**WiFi Spec:**
++
++(% style="color:#037691" %)**WiFi Spec:**
++
  * IEEE 802.11 b/g/n
  * Frequency Band: 2.4 ~~ 2.462GHz
  * Tx power:
@@ -84,8 +84,10 @@
  ** 11g 54M : -71dbm
  ** 11n 20M : -67dbm
--**LoRa Spec:**
++
++(% style="color:#037691" %)**LoRa Spec:**
++
  * Up to -142.5 dBm sensitivity with SX1250 Tx/Rx front-end
  * 70 dB CW interferer rejection at 1 MHz offset
  * Able to operate with negative SNR, CCR up to 9dB
@@ -95,8 +95,10 @@
  * Dynamic data-rate (DDR) adaptation
  * True antenna diversity or simultaneous dual-band operation
--**Cellular 4G LTE (optional):**
++
++(% style="color:#037691" %)**Cellular 4G LTE (optional):**
++
  * Quectel: [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
  * Standard Size SIM Slot
  * 2 x 4G Sticker Antenna.
@@ -104,6 +104,8 @@
  * Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
++
++
  == 1.3  Features ==
@@ -113,11 +113,15 @@
  * LoRaWAN Gateway
  * 10 programmable parallel demodulation paths
++
++
  == 1.4  Hardware System Structure ==
++
  [[image:1657011152828-178.png]]
++
  == 1.5  LG308N Applications ==
@@ -124,21 +124,25 @@
  [[image:1657011208596-209.png]]
++
  == 1.6  LED Indicators ==
++
  LG308N has totally 6 LEDs, They are:
--* **Power LED **[[image:image-20220705165446-1.png||height="21" width="22"]] : This (% style="color:red" %)**LED**(%%) will be **solid on** if the device is properly powered.
--* **HEART LED **[[image:image-20220705165446-2.png||height="19" width="18"]] : No function yet.
--* **SYS LED** [[image:image-20220705165446-3.png||height="20" width="19"]] :      This** LED** will shows different colors on different state:
++* **Power LED  **[[image:image-20220705165446-1.png||height="15" width="16"]] : This (% style="color:red" %)**LED**(%%) will be **solid on** if the device is properly powered.
++* **HEART LED **[[image:image-20220705165446-2.png||height="16" width="15"]] : No function yet.
++* **SYS LED** [[image:image-20220705165446-3.png||height="16" width="15"]] :      This** LED** will shows different colors on different state:
  ** (% style="color:red" %)**SOLID**(%%):      Device is alive with LoRaWAN server connection.
  ** (% style="color:red" %)**BLINKING**(%%)**:**  a) Device has internet connection but no LoRaWAN Connection.  or  b) Device is in booting stage, in this stage, it will (% style="color:red" %)**BLINKING**(%%)** **for several seconds.
  ** (% style="color:red" %)**OFF**(%%):          Device doesn't have Internet connection.
--* **ETH LED**[[image:image-20220705165446-4.png||height="19" width="22"]] [[image:image-20220705165446-5.png||height="18" width="20"]] : These two LEDs show the ETH interfaces connection status.
--* **WiFi LED** [[image:image-20220705165446-6.png||height="19" width="19"]]** **:      This LED shows the WiFi interface connection status.
++* **ETH LED** [[image:image-20220705165446-5.png||height="15" width="17"]] [[image:image-20220705165446-5.png||height="15" width="17"]]: These two LEDs show the ETH interfaces connection status.
++* **WiFi LED** [[image:image-20220705165446-6.png||height="15" width="15"]]** **:      This LED shows the WiFi interface connection status.
++(((
  (% style="color:red" %)**Note: Above LED indication are for firmware version > LG02_LG08~-~-build-v5.3.1584002217-20200312-1639**
++)))
  (((
@@ -149,11 +149,14 @@
  = 2.  Access and Configure LG308N =
--The LG308N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
++The LG308N is configured as a WiFi Access Point by default. User can access and configure the LG308N after connecting to its WiFi network, or via its Ethernet port.
++
++
  == 2.1  Find IP address of LG308N ==
++
  === 2.1.1  Connect via WiFi ===
  [[image:1657011715859-829.png]]
@@ -161,19 +161,22 @@
  At the first boot of LG308N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
--(% style="color:red" %)Note: In latest version firmware, it has been password protected and the password is: dragino+dragino
++(% style="color:red" %)**Note: In latest version firmware, it has been password protected and the password is:  **(% style="background-color:yellow" %)**dragino+dragino**
++
  [[image:1652413127647-377.png]]
  (((
--User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LG308N has the default IP (% style="color:green" %)10.130.1.1
++User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LG308N has the default IP (% style="color:green" %)**10.130.1.1**
++
  )))
  === 2.1.2  Connect via WAN port with DHCP IP from router ===
++
  [[image:1657011966663-484.png]]
  (((
@@ -187,6 +187,7 @@
  === 2.1.3  Connect via LAN port with direct connection from PC ===
++
  [[image:1657012061799-674.png]]
  (((
@@ -197,6 +197,7 @@
  === 2.1.4  Connect WiFi with DHCP IP from router ===
++
  [[image:image-20220705171041-7.png]]
@@ -242,22 +242,19 @@
  LG308N supports flexible network set up for different environment. This section describes the typical network topology can be set in LG308N. The typical network set up includes:
  )))
--
  * **WAN Port Internet Mode**
  * **WiFi Client Mode**
  * **WiFi AP Mode**
  * **Cellular Mode**
--
--
  == 3.2  Use WAN port to access Internet ==
--By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N’s WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
++By default, the LG308N is set to use the WAN port to connect to an upstream network. When you connect the LG308N's WAN port to an upstream router, LG308N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
  [[image:1657012559318-672.png]]
--== 3.3 Access the Internet as a WiFi Client ==
++== 3.3  Access the Internet as a WiFi Client ==
  In the WiFi Client Mode, LG308N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
@@ -330,11 +330,15 @@
  == 4.1  Create a gateway in TTN V3 Server ==
++(((
  (% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
++)))
  (((
++(((
  Every LG308N has a unique gateway id. The ID can be found at LoRaWAN page:
  )))
++)))
  (((
  [[image:1657013108723-531.png]]
@@ -360,13 +360,12 @@
  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
++
  * Europe 1 (% style="color:red" %)**corresponding Gateway server address:** (% style="color:black" %)eu1.cloud.thethings.network
  * North America 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)nam1.cloud.thethings.network
  * Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
  * Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
--
--
  (% style="color:#4f81bd" %)**Step 4: Create a Gateway**
  [[image:1652422440891-514.png||height="360" width="747"]]
@@ -390,7 +390,7 @@
  [[image:1652422509034-682.png||height="299" width="739"]]
--== 4.2  Configure DLOS8N to connect to TTN v3 ==
++== 4.2  Configure LG308N to connect to TTN v3 ==
  (((
  You can now configure the LG308N to let it connect to TTN network V3.
@@ -457,6 +457,8 @@
  * APP Key - Unique key to secure communications with a particular device.
  (((
++
++
  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
  )))
@@ -479,8 +479,10 @@
  [[image:1657014671459-433.png]]
++
  Open the **Application **select** Add end device**
++
  Start Register the end device
  [[image:1652422975885-591.png||height="359" width="726"]]
@@ -487,6 +487,8 @@
  (((
  Select OTAA activation mode
++
++
  )))
  (((
@@ -497,14 +497,18 @@
  First, input the End device ID, AppEUI and DevEUI.
++
  [[image:1652423022781-339.png||height="365" width="741"]]
  Secondly, choose the corresponding frequency and LoRaWAN class capabilities.
++
  [[image:1652423046741-467.png||height="355" width="736"]]
  (((
  Finally, Application layer settings input the corresponding AppKey. Before saving the configuration, check that the data matches the device.
++
++
  )))
  (((
@@ -518,18 +518,18 @@
  [[image:1652423277549-324.png||height="273" width="745"]]
--= 5. Web Configure Pages =
++= 5.  Web Configure Pages =
--== 5.1 Home ==
++== 5.1  Home ==
  Shows the system running status.
--[[image:1652423418568-752.png||height="329" width="724"]]
++[[image:1657014949846-507.png]]
--== 5.2 LoRa Settings ==
++== 5.2  LoRa Settings ==
--=== 5.2.1 LoRa ~-~-> LoRa ===
++=== 5.2.1  LoRa ~-~-> LoRa ===
  (((
  This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customized the band* as well.
@@ -536,11 +536,11 @@
  )))
  (((
--Different DLOS8N hardware version can support different frequency range:
++Different LG308N hardware version can support different frequency range:
  )))
--* **868**: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
--* **915**: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
++* (% style="color:blue" %)**868**(%%): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
++* (% style="color:blue" %)**915**(%%): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
  (((
  After user choose the frequency plan, he can see the actually frequency in used by checking the page **LogRead ~-~-> LoRa Log**
@@ -551,14 +551,16 @@
  Note *: **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
--=== 5.2.2 LoRa ~-~-> ABP Decryption ===
++=== 5.2.2  LoRa ~-~-> ABP Decryption ===
--The DLOS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
++The LG308N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
  * No internet connection.
  * User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>doc:Main.MQTT Forward Instruction.WebHome]]).
  (((
++
++
  Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
  )))
@@ -565,9 +565,9 @@
  [[image:1652423628833-467.png||height="357" width="755"]]
--== 5.3 LoRaWAN Settings ==
++== 5.3  LoRaWAN Settings ==
--=== 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
++=== 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
  This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc
@@ -575,7 +575,7 @@
  (% style="color:red" %)**Note:**
--~*: User can ignore the latitude and longitude settings here, DLOS8N will use the actually value from GPS module.
++~*: User can ignore the latitude and longitude settings here, LG308N will use the actually value from GPS module.
  ~**: Packet filter is to drop the unwanted LoRaWAN packet, instruction see here:
@@ -582,8 +582,9 @@
  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
--=== 5.3.2 LoRaWAN ~-~-> Amazon AWS-IoT ===
++=== 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
++
  [[image:1652428499323-384.png||height="275" width="723"]]
@@ -590,10 +590,11 @@
  (((
  Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
++
  )))
--=== 5.3.3 LoRaWAN ~-~-> LORIOT ===
++=== 5.3.3  LoRaWAN ~-~-> LORIOT ===
  (((
  Settings to communicate to LORIOT LoRaWAN Network Server: [[https:~~/~~/www.loriot.io/>>url:https://www.loriot.io/]]
@@ -606,27 +606,33 @@
  [[image:1652428648903-878.png||height="266" width="731"]]
--== 5.4 MQTT Settings ==
++== 5.4  MQTT Settings ==
--If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
++(((
++If end nodes works in ABP mode, user can configure LG308N to transfer the data to MQTT broker,
++)))
++(((
  Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
++)))
  [[image:1652428705046-212.png||height="417" width="733"]]
--== 5.5 System ==
--=== 5.5.1 System ~-~-> System Overview ===
++== 5.5  System ==
++=== 5.5.1  System ~-~-> System Overview ===
++
  Shows the system info:
  [[image:1652428773760-580.png||height="408" width="728"]]
--=== 5.5.2 System ~-~-> General ( login settings) ===
++=== 5.5.2  System ~-~-> General ( login settings) ===
++
  [[image:1652428861256-300.png||height="354" width="724"]]
  (((
@@ -634,7 +634,7 @@
  )))
  (((
--There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
++There are two login for DLOS8: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
  )))
  (((
@@ -642,56 +642,60 @@
  )))
  (((
--**__Timezone:__**Set device timezone.
++**__Timezone: __**Set device timezone.
  )))
  (((
--**__Port forwarding:__**Enable/Disable the HTTP and SSH access via WAN interface.
++**__Port forwarding: __**Enable/Disable the HTTP and SSH access via WAN interface.
++
  )))
--=== 5.5.3 System ~-~-> Network ===
++=== 5.5.3  System ~-~-> Network ===
  [[image:1652429149053-824.png||height="467" width="725"]]
  (((
--**__LAN Settings:__**When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
++**__LAN Settings:  __**When the LG308N has the AP enable, LAN settings specify the network info for LG308N's own network.
  )))
  (((
--__**WAN Settings:**__Setting for DLOS8N WAN port
++__**WAN Settings: **__Setting for LG308N WAN port
  )))
  (((
--__**WiFi Settings:**__Setting for DLOS8N WiFi IP when use it as WiFi Client
--
--
++__**WiFi Settings:  **__Setting for LG308N WiFi IP when use it as WiFi Client
  )))
--=== 5.5.4 System ~-~-> WiFi ===
--DLOS8N WiFi Settings.
++=== 5.5.4  System ~-~-> WiFi ===
++
++LG308N WiFi Settings.
++
  [[image:1652429430767-921.png||height="367" width="723"]]
--=== 5.5.5 System ~-~-> Cellular ===
++=== 5.5.5  System ~-~-> Cellular ===
++
  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
  [[image:1652429309615-825.png||height="320" width="732"]]
--(% style="color:red" %)Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
++(% style="color:red" %)Note *: For LG308N which doesn't have the cellular module, this page will shows Cellular not detected.
--=== 5.5.6 System ~-~-> Network Status ===
++=== 5.5.6  System ~-~-> Network Status ===
++
  [[image:1652429486609-208.png||height="415" width="728"]]
--=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
++=== 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
++
  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
  [[image:1652429518191-846.png||height="332" width="733"]]
@@ -702,9 +702,7 @@
  Please see this document for detail:
--(((
--[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
--)))
++[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
  R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Remote Access Gateway.WebHome]]**
@@ -712,8 +712,9 @@
  [[image:1652429624400-864.png||height="432" width="716"]]
--=== 5.5.8 System ~-~-> Firmware Upgrade ===
++=== 5.5.8  System ~-~-> Firmware Upgrade ===
++
  We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
  * **Latest firmware**:  [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
@@ -720,10 +720,12 @@
  ( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]] )
++
  * **Change Log**: [[Firmware Change Log>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]].
  ( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
++
  (((
  The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
  )))
@@ -734,11 +734,18 @@
  [[image:1652429711145-862.png||height="270" width="737"]]
++
++(((
  Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
++)))
++(((
  (% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
++)))
++(((
  The system will automatically boot into the new firmware after upgrade.
++)))
  [[image:1652429962190-224.png||height="358" width="729"]]
@@ -748,18 +748,22 @@
  (% style="color:#4f81bd" %)**//root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
++
  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
--=== 5.5.9 System ~-~-> Reboot/Reset ===
++=== 5.5.9  System ~-~-> Reboot/Reset ===
++
  [[image:1652430197132-330.png||height="256" width="724"]]
  (((
++
++
  )))
--=== 5.5.10 System ~-~-> Package Maintain ===
++=== 5.5.10  System ~-~-> Package Maintain ===
  [[image:1652430243826-126.png||height="289" width="723"]]
@@ -766,52 +766,45 @@
  Place to show what package has installed and possible to upgrade packages.
--== 5.6 LogRead ==
--=== 5.6.1 LogRead ~-~-> LoRa Log ===
++== 5.6  LogRead ==
++=== 5.6.1  LogRead ~-~-> LoRa Log ===
  Show the frequency for LoRa Radio and traffics.
--[[image:image-20220615204306-1.png||height="575" width="733"]]
++[[image:1657069890320-513.png]]
--Show the IoT Server Connection State and FWD State
--[[image:image-20220616083933-1.png||height="556" width="729"]]
--DLOS8 can view GPS location in the Logread FWD State
++=== 5.6.2  LogRead ~-~-> System Log ===
++Show the system log
--Show the Error logs, RxTxJson lorawan packages, and PULL State
++[[image:1657069922599-794.png]]
--[[image:image-20220615205416-6.png||height="442" width="884"]]
--=== 5.6.2 LogRead ~-~-> System Log ===
++= 6.  More features =
--Show the system log
++== 6.1  More instructions ==
--[[image:1652430369760-511.png||height="373" width="730"]]
--
--= 6. More features =
--
--== 6.1 More instructions ==
--
  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
--= 7. Linux System =
--The DLOS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
++= 7.  Linux System =
++The LG308N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
--== 7.1 SSH Access for Linux console ==
--User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
++== 7.1  SSH Access for Linux console ==
--IP address:  IP address of DLOS8N
++User can access the Linux console via the SSH protocol. Make sure your PC and the LG308N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
++IP address:  IP address of LG308N
++
  Port:         22 (via WiFi AP mode) or 2222 (via WAN Interface)
  User Name:      (% style="color:green" %)**root**
@@ -818,19 +818,22 @@
  Password:         (% style="color:green" %)**dragino** (% style="color:black" %)(default)
++
  After logging in, you will be in the Linux console and can enter commands as shown below.
  [[image:1652431588565-830.png]]
++
  The “(% class="mark" %)**logread -f**(%%)” command can be used to debug how system runs.
--[[image:1652431609193-637.png||height="214" width="732"]]
++[[image:1657070133275-283.png]]
--== 7.2 Edit and Transfer files ==
++== 7.2  Edit and Transfer files ==
++
  (((
--The DLOS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
++The LG308N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
  )))
  (((
@@ -838,7 +838,7 @@
  )))
  (((
--After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the DLOS8N, or edit the files directly in the windows.
++After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the LG308N, or edit the files directly in the windows.
  )))
  (((
@@ -848,25 +848,25 @@
  [[image:1652431650755-450.png]]
--== 7.3 File System ==
++== 7.3  File System ==
  (((
--The DLOS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
--)))
--
  (((
--The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the DLOS8N flash.
++The LG308N has a 16MB flash and a 64MB RAM. The /var and /tmp directory are in the RAM, contents stored in /tmp and /var will be erased after reboot the device. Other directories are in the flash and will keep after reboot.
  )))
++
  (((
--You can use an external USB flash memory device to extend the size of flash memory for storage.
++The Linux system use around 8MB ~~10MB flash size which means there is not much room for user to store data in the LG308N flash. User can use an external USB flash to extend the size for storage.
  )))
++)))
--== 7.4 Package maintenance system ==
--DLOS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
++== 7.4  Package maintenance system ==
++LG308N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
++
  (((
  Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
  )))
@@ -916,15 +916,19 @@
  (((
  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
++
++
++
  )))
--= 8. Upgrade Linux Firmware =
++= 8.  Upgrade Linux Firmware =
--= 9. FAQ =
--== 9.1 How can I configure for a customized frequency band? ==
++= 9.  FAQ =
++== 9.1  How can I configure for a customized frequency band? ==
++
  (((
  See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
  )))
@@ -933,15 +933,15 @@
  )))
--== 9.2 Can I connect DLOS8N to LORIOT? ==
++== 9.2  Can I connect LG308N to LORIOT? ==
  Yes, the set up instruction is here: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
--== 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
++== 9.3  Can I make my own firmware for the gateway, where can I find the source code? ==
  (((
--Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
++Yes, You can make your own firmware for the LG308N for branding purposes or to add customized applications.
  )))
  (((
@@ -949,15 +949,41 @@
  )))
--== 9.4 Can I use 868Mhz version for 915Mhz bands? ==
++== 9.4  Can I use 868Mhz version for 915Mhz bands? ==
  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
--= 10. Trouble Shooting =
++== 9.5  Can I control the LEDs? ==
--== 10.1 I get kernel error when install new package, how to fix? ==
++Except the PWR LED is controlled by +3v3 power directly. All other LEDs can be controlled by developer.
++
++(% style="color:blue" %)**Control Globe LED:**
++
++ON: echo 1 > /sys/class/leds/dragino2\:red\:wlan/brightness
++
++OFF: echo 0 > /sys/class/leds/dragino2\:red\:wlan/brightness
++
++
++(% style="color:blue" %)**Control HEART LED:**
++
++First export the gpio27 and set to out
++
++echo 27 > /sys/class/gpio/export
++
++echo out > /sys/class/gpio/gpio27/direction
++
++ON: echo 0 > /sys/class/gpio/gpio27/value
++
++OFF: echo 1 > /sys/class/gpio/gpio27/value
++
++
++
++= 10.  Trouble Shooting =
++
++== 10.1  I get kernel error when install new package, how to fix? ==
++
  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
  (% style="background-color:yellow" %)root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
@@ -979,8 +979,9 @@
  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
--== 10.2 How to recover the DLOS8N if the firmware crashes ==
++== 10.2  How to recover the LG308N if the firmware crashes ==
++
  (((
  Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
  )))
@@ -989,64 +989,81 @@
  )))
--== 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
++== 10.3  I configured LG308N for WiFi access and lost its IP. What to do now? ==
--[[image:1652435238615-272.png||height="247" width="727"]]
++[[image:1657074078183-336.png]]
  (((
--The DLOS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access DLOS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
++(((
++The LG308N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access LG308N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
  )))
++)))
++(((
  (% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
++)))
++(((
  Steps to connect via fall back IP:
++)))
--~1. Connect PC’s Ethernet port to DLOS8N’s WAN port
++(((
++~1. Connect PC's Ethernet port to LG01's LAN port
++)))
--2. Configure PC’s Ethernet port has
--    IP: 172.31.255.253 and
--    Netmask: 255.255.255.252
++(((
++2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
++)))
++(((
  As below photo:
++)))
  [[image:1652435256286-879.png]]
--3. In the PC, use IP address 172.31.255.254 to access the DLOS8N via Web or Console.
++3. In PC, use 172.31.255.254 to access LG308N via Web or Console.
--Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
--= 11. Order Info =
++= 11.  Order Info =
--(% style="color:#4f81bd" %) **//PART: DLOS8N-XXX-YYY//: **
--(% style="color:#4f81bd" %) **//XXX: Frequency Band//**
++(% style="color:#4f81bd" %)**//PART: DLOS8N-XXX-YYY//: **
--* (% style="color:#4f81bd" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
--* (% style="color:#4f81bd" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
++(% style="color:#4f81bd" %)**//XXX: Frequency Band//**
--(% style="color:#4f81bd" %) **//YYY: 4G Cellular Option//**
++* (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
++* (% style="color:red" %)** 915**(% style="color:black" %):  valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
--* (% style="color:#4f81bd" %)** E**(% style="color:black" %): EMEA, Korea, Thailand, India.
--* (% style="color:#4f81bd" %)** A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
--* (% style="color:#4f81bd" %)** AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
--* (% style="color:#4f81bd" %)** J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
++(% style="color:#4f81bd" %)
++(% style="color:#4f81bd" %)**//YYY: 4G Cellular Option//**
++
++* (% style="color:red" %)** EC25-E**(% style="color:black" %):    EMEA, Korea, Thailand, India.
++* (% style="color:red" %)** EC25-A**(% style="color:black" %):   North America/ Rogers/AT&T/T-Mobile.
++* (% style="color:red" %)** EC25-AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
++* (% style="color:red" %)** EC25-J**(% style="color:black" %):    Japan, DOCOMO/SoftBank/ KDDI
++
  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
--= 12. Packing Info =
++= 12.  Packing Info =
  (((
++
++
  **Package Includes**:
--)))
--* DLOS8N LoRaWAN Gateway x 1
--* Stick Antenna for LoRa RF part. Frequency is one of 470 or 868 or 915Mhz depends the model ordered
++* LG308N or LG08 LoRa Gateway x 1
++* Stick Antenna for LoRa RF part. Frequency is one of 433 or 868 or 915Mhz depends the model ordered
++* Power Adapter: EU/AU/US type power adapter depends on country to be used
  * Packaging with environmental protection paper box
++)))
  (((
++
++
  **Dimension and weight**:
  )))
@@ -1055,9 +1055,21 @@
  * Package Size: 49 x 19.5 x  x 19Package Size: 4912 cm
  * Weight: 2.5kg
--= 13. Support =
++= 13.  Support =
++
  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
++
++
++= 14.  Reference =
++
++* Source code for LG08 LoRa Gateway: [[https:~~/~~/github.com/dragino/openwrt_lede-18.06>>url:https://github.com/dragino/openwrt_lede-18.06]]
++
++* OpenWrt official Wiki: [[http:~~/~~/www.openwrt.org/>>url:http://www.openwrt.org/]]
++
++* Firmware: [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308N-OLG308N/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]]
++
++* Hardware Source code: [[https:~~/~~/github.com/dragino/motherboard-hardware/tree/master/LG308N>>url:https://github.com/dragino/motherboard-hardware/tree/master/LG308]]

1657069890320-513.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+63.2 KB

Content

1657069922599-794.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+58.2 KB

Content

1657070133275-283.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+221.0 KB

Content

1657071488240-907.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+60.0 KB

Content

1657074078183-336.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+60.0 KB

Content

Changes for page LG308N -- LoRaWAN Gateway User Manual

Summary

Details

Applications

Navigation