Last modified by Kilight Cao on 2025/02/07 08:57
<
From version < 108.1 >
edited by Xiaoling
on 2022/07/05 17:10
To version < 123.4 >
edited by Xiaoling
on 2022/07/06 09:46
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -50,7 +50,7 @@
50 50  == 1.2  Specifications ==
51 51  
52 52  
53 -**Hardware System:**
53 +(% style="color:#037691" %)**Hardware System:**
54 54  
55 55  (((
56 56   Linux Part:
... ... @@ -60,7 +60,7 @@
60 60  * 64MB RAM
61 61  * 16MB Flash
62 62  
63 -**Interface:**
63 +(% style="color:#037691" %)**Interface:**
64 64  
65 65  * 10M/100M RJ45 Ports x 2
66 66  * WiFi : 802.11 b/g/n
... ... @@ -71,7 +71,7 @@
71 71  * Mini-PCI E connector x 1
72 72  * SX1302 + 2 x SX1250
73 73  
74 -**WiFi Spec:**
74 +(% style="color:#037691" %)**WiFi Spec:**
75 75  
76 76  * IEEE 802.11 b/g/n
77 77  * Frequency Band: 2.4 ~~ 2.462GHz
... ... @@ -84,7 +84,7 @@
84 84  ** 11g 54M : -71dbm
85 85  ** 11n 20M : -67dbm
86 86  
87 -**LoRa Spec:**
87 +(% style="color:#037691" %)**LoRa Spec:**
88 88  
89 89  * Up to -142.5 dBm sensitivity with SX1250 Tx/Rx front-end
90 90  * 70 dB CW interferer rejection at 1 MHz offset
... ... @@ -95,7 +95,7 @@
95 95  * Dynamic data-rate (DDR) adaptation
96 96  * True antenna diversity or simultaneous dual-band operation
97 97  
98 -**Cellular 4G LTE (optional):**
98 +(% style="color:#037691" %)**Cellular 4G LTE (optional):**
99 99  
100 100  * Quectel: [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
101 101  * Standard Size SIM Slot
... ... @@ -113,7 +113,6 @@
113 113  * LoRaWAN Gateway
114 114  * 10 programmable parallel demodulation paths
115 115  
116 -
117 117  == 1.4  Hardware System Structure ==
118 118  
119 119  [[image:1657011152828-178.png]]
... ... @@ -190,20 +190,32 @@
190 190  
191 191  [[image:1657012061799-674.png]]
192 192  
192 +(((
193 193  The LG308N __**LAN port**__ is configured as DHCP router by default, user can connect the PC to LAN port and set PC to DHCP mode, it will get IP from LAN port and be able to access to the device. The default IP in LAN port is 10.130.1.1
194 +)))
194 194  
195 195  
196 196  
197 -=== 2.1.4 Connect via Ethernet with fall back ip ===
198 +=== 2.1.4  Connect WiFi with DHCP IP from router ===
198 198  
199 -The WAN port also has a [[fall back ip address>>path:#_I_configured_LPS8]] for access if user doesn’t connect to uplink router. Click [[here>>path:#_I_configured_LPS8]] to see how to configure.
200 +[[image:image-20220705171041-7.png]]
200 200  
201 201  
202 -== 2.2 Access Configure Web UI ==
203 +If the LG308N already connect to the router via WiFi, use can use the WiFi IP to connect to LG308N.
203 203  
205 +
206 +
207 +=== 2.1.5  Connect via LAN port by fall back ip ===
208 +
209 +The **LAN port** also has a [[fall back ip address>>path:#fallback_ip]] for access if user doesn't connect to uplink router.
210 +
211 +
212 +
213 +== 2.2  Access Configure Web UI ==
214 +
204 204  **Web Interface**
205 205  
206 -Open a browser on the PC and type the DLOS8N ip address (depends on your connect method)
217 +Open a browser on the PC and type the LG308N ip address (depends on your connect method)
207 207  
208 208  [[http:~~/~~/10.130.1.1/>>url:http://10.130.1.1/]] (Access via WiFi AP network)
209 209  
... ... @@ -222,33 +222,36 @@
222 222  
223 223  [[image:1652414287022-223.png]]
224 224  
225 -= 3. Typical Network Setup =
226 226  
227 -== 3.1 Overview ==
237 += 3.  Typical Network Setup =
228 228  
229 -The DLOS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
239 +== 3.1  Overview ==
230 230  
241 +(((
242 +LG308N supports flexible network set up for different environment. This section describes the typical network topology can be set in LG308N. The typical network set up includes:
243 +)))
244 +
231 231  * **WAN Port Internet Mode**
232 232  * **WiFi Client Mode**
233 233  * **WiFi AP Mode**
234 234  * **Cellular Mode**
235 235  
236 -== 3.2 Use WAN port to access Internet ==
250 +== 3.2  Use WAN port to access Internet ==
237 237  
238 238  By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N’s WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
239 239  
240 -[[image:1652420169255-959.png]]
254 +[[image:1657012559318-672.png]]
241 241  
242 242  
243 243  == 3.3 Access the Internet as a WiFi Client ==
244 244  
245 -In the WiFi Client Mode, DLOS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
259 +In the WiFi Client Mode, LG308N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
246 246  
247 247  (((
248 248  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
249 249  )))
250 250  
251 -[[image:1652420327792-211.png]]
265 +[[image:1657012573321-862.png]]
252 252  
253 253  (((
254 254  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
... ... @@ -256,19 +256,21 @@
256 256  
257 257  )))
258 258  
259 -== 3.4 Access the Internet via Cellular ==
273 +== 3.4  Use built-in 4G modem for internet access ==
260 260  
261 -If the DLOS8N support 3G/4G Cellular modem option, When the label on the shell is displayed as Model : DLOS8N-EC25, it indicates that DLOS8 already has EC25 3G/4G modules,user can use it as main internet connection or back up.
275 +If the LG308N has 3G/4G Cellular modem, user can use it as main internet connection or back up.
262 262  
263 -(((
264 -First, release the four screws of DLOS8N, pull out PCB and install SIM card as below:
265 -)))
266 266  
267 -[[image:1652420606018-181.png]]
278 +First, install the Micro SIM card as below direction
268 268  
280 +Second, Power off/ ON LG308N to let it detect the SIM card.
269 269  
282 +[[image:image-20220705171836-8.png]]
283 +
284 +
285 +
270 270  (((
271 -[[image:1652420718132-929.png||height="427" width="727"]]
287 +
272 272  )))
273 273  
274 274  (((
... ... @@ -277,53 +277,55 @@
277 277  
278 278  (((
279 279  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
296 +
297 +
280 280  )))
281 281  
282 282  (((
283 -[[image:1652421032117-341.png||height="329" width="752"]]
301 +[[image:image-20220705171919-9.png]]
284 284  )))
285 285  
286 -(% style="color:red" %)**Note** *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
287 287  
305 +== 3.5  Check Internet connection ==
288 288  
289 -== 3.5 Check Internet connection ==
290 -
291 291  In the (% style="color:#4f81bd" %)**home**(%%) page, we can check the Internet connection.
292 292  
293 293  * GREEN Tick ​​​​ [[image:1652436675869-206.png||height="14" width="15"]] : This interface has Internet connection.
294 -* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don’t use it for internet connection.
295 -* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn’t connected.
310 +* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don't use it for internet connection.
311 +* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn't connected.
296 296  
297 -[[image:1652421351382-793.png||height="339" width="765"]]
313 +[[image:1657012821329-972.png]]
298 298  
299 299  
300 -= 4. Example: Configure as a LoRaWAN gateway =
316 += 4.  Example: Configure as a LoRaWAN gateway =
301 301  
302 -DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
318 +LG308N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
303 303  
304 304  (((
305 -[[image:image-20220513140429-1.png||height="565" width="824"]]
321 +[[image:1657012860422-990.png]]
306 306  )))
307 307  
308 -This chapter describes how to use the DLOS8Nto work with
324 +This chapter describes how to use the LG308N to work with(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
309 309  
310 -TheThingsNetwork v3(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
311 311  
327 +== 4.1  Create a gateway in TTN V3 Server ==
312 312  
313 -== 4.1 Create a gateway in TTN V3 Server ==
314 314  
315 315  (% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
316 316  
317 317  (((
318 -Every DLOS8N has a unique gateway id. The ID can be found at LoRaWAN page:
333 +Every LG308N has a unique gateway id. The ID can be found at LoRaWAN page:
319 319  )))
320 320  
321 321  (((
322 -[[image:1652421929753-168.png||height="403" width="739"]]
337 +[[image:1657013108723-531.png]]
338 +
339 +
323 323  )))
324 324  
325 -The example gateway id is: **a840411e96744154**
342 +The example gateway id is: (% style="color:green" %)**a840411e96744154**
326 326  
344 +
327 327  (% style="color:#4f81bd" %)**Step 2: Sign up a user account in TTN server**
328 328  
329 329  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
... ... @@ -330,6 +330,7 @@
330 330  
331 331  [[image:1652422127479-258.png||height="346" width="738"]]
332 332  
351 +
333 333  (% style="color:#4f81bd" %)**Step 3: Choose the TTNv3 Cluster Picker**
334 334  
335 335  (((
... ... @@ -338,11 +338,12 @@
338 338  
339 339  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
340 340  
341 -* Europe 1 (% style="color:red" %)corresponding Gateway server address: (% style="color:black" %)eu1.cloud.thethings.network
342 -* North America 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)nam1.cloud.thethings.network
343 -* Australia 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)au1.cloud.thethings.network
344 -* Legacy V2 Console : (% style="color:red" %)TTN v2 shuts down in December 2021
345 345  
361 +* Europe 1 (% style="color:red" %)**corresponding Gateway server address:** (% style="color:black" %)eu1.cloud.thethings.network
362 +* North America 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)nam1.cloud.thethings.network
363 +* Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
364 +* Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
365 +
346 346  (% style="color:#4f81bd" %)**Step 4: Create a Gateway**
347 347  
348 348  [[image:1652422440891-514.png||height="360" width="747"]]
... ... @@ -353,8 +353,10 @@
353 353  
354 354   [[image:1652422470352-518.png||height="391" width="716"]]
355 355  
376 +
356 356  [[image:1652422479876-297.png||height="398" width="729"]]
357 357  
379 +
358 358  (((
359 359  (% style="color:red" %)**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
360 360  )))
... ... @@ -364,14 +364,14 @@
364 364  [[image:1652422509034-682.png||height="299" width="739"]]
365 365  
366 366  
367 -== 4.2 Configure DLOS8N to connect to TTN v3 ==
389 +== 4.2  Configure DLOS8N to connect to TTN v3 ==
368 368  
369 369  (((
370 -You can now configure the DLOS8N to let it connect to TTN network V3.
392 +You can now configure the LG308N to let it connect to TTN network V3.
371 371  )))
372 372  
373 373  (((
374 -Make sure your DLOS8N has a working Internet Connection first.
396 +Make sure your LG308N has a working Internet Connection first.
375 375  )))
376 376  
377 377  (((
... ... @@ -382,19 +382,22 @@
382 382  
383 383  (% style="color:red" %)**Note: **The server address must match the Gateway server address you choose in TTN V3.
384 384  
407 +
385 385  In the home page, we can see the LoRaWAN connection is ready now.
386 386  
387 -[[image:1652422685063-596.png||height="327" width="729"]]
410 +[[image:1657014479765-850.png]]
388 388  
412 +
389 389  In TTN v3 portal, we can also see the gateway is connected.
390 390  
391 391  [[image:1652422703020-955.png||height="343" width="730"]]
392 392  
393 393  
394 -== 4.3 Configure frequency ==
418 +== 4.3  Configure frequency ==
395 395  
396 -We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
420 +We also need to set the frequency plan in LG308N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
397 397  
422 +
398 398  [[image:1652422737399-529.png||height="362" width="737"]]
399 399  
400 400  
... ... @@ -403,7 +403,7 @@
403 403   [[image:1652422763536-750.png||height="514" width="730"]]
404 404  
405 405  
406 -== 4.4 Add a LoRaWAN End Device ==
431 +== 4.4  Add a LoRaWAN End Device ==
407 407  
408 408  (((
409 409  This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
... ... @@ -428,13 +428,18 @@
428 428  * APP Key - Unique key to secure communications with a particular device.
429 429  
430 430  (((
456 +
457 +
431 431  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
432 432  )))
433 433  
434 434  [[image:1652422840936-838.png]]
435 435  
463 +
436 436  (((
437 437  (% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
466 +
467 +
438 438  )))
439 439  
440 440  (((
... ... @@ -445,10 +445,12 @@
445 445  Select **Add Application** to open the screen below.
446 446  )))
447 447  
448 -[[image:1652422946999-255.png||height="356" width="744"]]
478 +[[image:1657014671459-433.png]]
449 449  
480 +
450 450  Open the **Application **select** Add end device**
451 451  
483 +
452 452  Start Register the end device
453 453  
454 454  [[image:1652422975885-591.png||height="359" width="726"]]
... ... @@ -455,6 +455,8 @@
455 455  
456 456  (((
457 457  Select OTAA activation mode
490 +
491 +
458 458  )))
459 459  
460 460  (((
... ... @@ -465,14 +465,18 @@
465 465  
466 466  First, input the End device ID, AppEUI and DevEUI.
467 467  
502 +
468 468  [[image:1652423022781-339.png||height="365" width="741"]]
469 469  
470 470  Secondly, choose the corresponding frequency and LoRaWAN class capabilities.
471 471  
507 +
472 472  [[image:1652423046741-467.png||height="355" width="736"]]
473 473  
474 474  (((
475 475  Finally, Application layer settings input the corresponding AppKey. Before saving the configuration, check that the data matches the device.
512 +
513 +
476 476  )))
477 477  
478 478  (((
... ... @@ -486,18 +486,18 @@
486 486  [[image:1652423277549-324.png||height="273" width="745"]]
487 487  
488 488  
489 -= 5. Web Configure Pages =
527 += 5.  Web Configure Pages =
490 490  
491 -== 5.1 Home ==
529 +== 5.1  Home ==
492 492  
493 493  Shows the system running status.
494 494  
495 -[[image:1652423418568-752.png||height="329" width="724"]]
533 +[[image:1657014949846-507.png]]
496 496  
497 497  
498 -== 5.2 LoRa Settings ==
536 +== 5.2  LoRa Settings ==
499 499  
500 -=== 5.2.1 LoRa ~-~-> LoRa ===
538 +=== 5.2.1  LoRa ~-~-> LoRa ===
501 501  
502 502  (((
503 503  This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customized the band* as well.
... ... @@ -504,11 +504,11 @@
504 504  )))
505 505  
506 506  (((
507 -Different DLOS8N hardware version can support different frequency range:
545 +Different LG308N hardware version can support different frequency range:
508 508  )))
509 509  
510 -* **868**: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
511 -* **915**: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
548 +* (% style="color:blue" %)**868**(%%): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
549 +* (% style="color:blue" %)**915**(%%): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
512 512  
513 513  (((
514 514  After user choose the frequency plan, he can see the actually frequency in used by checking the page **LogRead ~-~-> LoRa Log**
... ... @@ -519,14 +519,16 @@
519 519  Note *: **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
520 520  
521 521  
522 -=== 5.2.2 LoRa ~-~-> ABP Decryption ===
560 +=== 5.2.2  LoRa ~-~-> ABP Decryption ===
523 523  
524 -The DLOS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
562 +The LG308N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
525 525  
526 526  * No internet connection.
527 527  * User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>doc:Main.MQTT Forward Instruction.WebHome]]).
528 528  
529 529  (((
568 +
569 +
530 530  Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
531 531  )))
532 532  
... ... @@ -533,9 +533,9 @@
533 533  [[image:1652423628833-467.png||height="357" width="755"]]
534 534  
535 535  
536 -== 5.3 LoRaWAN Settings ==
576 +== 5.3  LoRaWAN Settings ==
537 537  
538 -=== 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
578 +=== 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
539 539  
540 540  This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc
541 541  
... ... @@ -550,8 +550,9 @@
550 550  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
551 551  
552 552  
553 -=== 5.3.2 LoRaWAN ~-~-> Amazon AWS-IoT ===
554 554  
594 +=== 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
595 +
555 555  [[image:1652428499323-384.png||height="275" width="723"]]
556 556  
557 557  
... ... @@ -558,10 +558,11 @@
558 558  (((
559 559  Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
560 560  
602 +
561 561  
562 562  )))
563 563  
564 -=== 5.3.3 LoRaWAN ~-~-> LORIOT ===
606 +=== 5.3.3  LoRaWAN ~-~-> LORIOT ===
565 565  
566 566  (((
567 567  Settings to communicate to LORIOT LoRaWAN Network Server: [[https:~~/~~/www.loriot.io/>>url:https://www.loriot.io/]]
... ... @@ -574,9 +574,9 @@
574 574  [[image:1652428648903-878.png||height="266" width="731"]]
575 575  
576 576  
577 -== 5.4 MQTT Settings ==
619 +== 5.4  MQTT Settings ==
578 578  
579 -If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
621 +If end nodes works in ABP mode, user can configure LG308N to transfer the data to MQTT broker,
580 580  
581 581  Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
582 582  
... ... @@ -584,17 +584,19 @@
584 584  [[image:1652428705046-212.png||height="417" width="733"]]
585 585  
586 586  
587 -== 5.5 System ==
588 588  
589 -=== 5.5.1 System ~-~-> System Overview ===
630 +== 5.5  System ==
590 590  
632 +=== 5.5.1  System ~-~-> System Overview ===
633 +
591 591  Shows the system info:
592 592  
593 593  [[image:1652428773760-580.png||height="408" width="728"]]
594 594  
595 595  
596 -=== 5.5.2 System ~-~-> General ( login settings) ===
597 597  
640 +=== 5.5.2  System ~-~-> General ( login settings) ===
641 +
598 598  [[image:1652428861256-300.png||height="354" width="724"]]
599 599  
600 600  (((
... ... @@ -602,7 +602,7 @@
602 602  )))
603 603  
604 604  (((
605 -There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
649 +There are two login for DLOS8: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
606 606  )))
607 607  
608 608  (((
... ... @@ -610,56 +610,60 @@
610 610  )))
611 611  
612 612  (((
613 -**__Timezone:__**Set device timezone.
657 +**__Timezone: __**Set device timezone.
614 614  )))
615 615  
616 616  (((
617 -**__Port forwarding:__**Enable/Disable the HTTP and SSH access via WAN interface.
661 +**__Port forwarding: __**Enable/Disable the HTTP and SSH access via WAN interface.
618 618  
663 +
619 619  
620 620  )))
621 621  
622 -=== 5.5.3 System ~-~-> Network ===
667 +=== 5.5.3  System ~-~-> Network ===
623 623  
624 624  [[image:1652429149053-824.png||height="467" width="725"]]
625 625  
626 626  (((
627 -**__LAN Settings:__**When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
672 +**__LAN Settings:  __**When the LG308N has the AP enable, LAN settings specify the network info for LG308N's own network.
628 628  )))
629 629  
630 630  (((
631 -__**WAN Settings:**__Setting for DLOS8N WAN port
676 +__**WAN Settings: **__Setting for LG308N WAN port
632 632  )))
633 633  
634 634  (((
635 -__**WiFi Settings:**__Setting for DLOS8N WiFi IP when use it as WiFi Client
636 -
637 -
680 +__**WiFi Settings:  **__Setting for LG308N WiFi IP when use it as WiFi Client
638 638  )))
639 639  
640 -=== 5.5.4 System ~-~-> WiFi ===
641 641  
642 -DLOS8N WiFi Settings.
643 643  
685 +=== 5.5.4  System ~-~-> WiFi ===
686 +
687 +LG308N WiFi Settings.
688 +
644 644  [[image:1652429430767-921.png||height="367" width="723"]]
645 645  
646 646  
647 -=== 5.5.5 System ~-~-> Cellular ===
648 648  
693 +=== 5.5.5  System ~-~-> Cellular ===
694 +
649 649  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
650 650  
651 651  [[image:1652429309615-825.png||height="320" width="732"]]
652 652  
653 -(% style="color:red" %)Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
699 +(% style="color:red" %)Note *: For LG308N which doesn't have the cellular module, this page will shows Cellular not detected.
654 654  
655 655  
656 -=== 5.5.6 System ~-~-> Network Status ===
657 657  
703 +=== 5.5.6  System ~-~-> Network Status ===
704 +
658 658  [[image:1652429486609-208.png||height="415" width="728"]]
659 659  
660 660  
661 -=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
662 662  
709 +=== 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
710 +
663 663  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
664 664  
665 665  [[image:1652429518191-846.png||height="332" width="733"]]
... ... @@ -670,8 +670,10 @@
670 670  
671 671  Please see this document for detail:
672 672  
721 +[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
722 +
673 673  (((
674 -[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
724 +
675 675  )))
676 676  
677 677  
... ... @@ -680,8 +680,9 @@
680 680  [[image:1652429624400-864.png||height="432" width="716"]]
681 681  
682 682  
683 -=== 5.5.8 System ~-~-> Firmware Upgrade ===
684 684  
734 +=== 5.5.8  System ~-~-> Firmware Upgrade ===
735 +
685 685  We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
686 686  
687 687  * **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
... ... @@ -688,10 +688,12 @@
688 688  
689 689  ( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]] )
690 690  
742 +
691 691  * **Change Log**: [[Firmware Change Log>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]].
692 692  
693 693  ( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
694 694  
747 +
695 695  (((
696 696  The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
697 697  )))
... ... @@ -702,6 +702,7 @@
702 702  
703 703  [[image:1652429711145-862.png||height="270" width="737"]]
704 704  
758 +
705 705  Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
706 706  
707 707  (% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
... ... @@ -716,18 +716,22 @@
716 716  
717 717  (% style="color:#4f81bd" %)**//root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
718 718  
773 +
719 719  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
720 720  
721 721  
722 -=== 5.5.9 System ~-~-> Reboot/Reset ===
723 723  
778 +=== 5.5.9  System ~-~-> Reboot/Reset ===
779 +
724 724  [[image:1652430197132-330.png||height="256" width="724"]]
725 725  
726 726  (((
727 727  
784 +
785 +
728 728  )))
729 729  
730 -=== 5.5.10 System ~-~-> Package Maintain ===
788 +=== 5.5.10  System ~-~-> Package Maintain ===
731 731  
732 732  [[image:1652430243826-126.png||height="289" width="723"]]
733 733  
... ... @@ -734,52 +734,45 @@
734 734  Place to show what package has installed and possible to upgrade packages.
735 735  
736 736  
737 -== 5.6 LogRead ==
738 738  
739 -=== 5.6.1 LogRead ~-~-> LoRa Log ===
796 +== 5.6  LogRead ==
740 740  
798 +=== 5.6.1  LogRead ~-~-> LoRa Log ===
741 741  
742 742  Show the frequency for LoRa Radio and traffics.
743 743  
744 -[[image:image-20220615204306-1.png||height="575" width="733"]]
802 +[[image:1657069890320-513.png]]
745 745  
746 746  
747 -Show the IoT Server Connection State and FWD State
748 748  
749 -[[image:image-20220616083933-1.png||height="556" width="729"]]
750 750  
751 -DLOS8 can view GPS location in the Logread FWD State
807 +=== 5.6.2  LogRead ~-~-> System Log ===
752 752  
809 +Show the system log
753 753  
754 -Show the Error logs, RxTxJson lorawan packages, and PULL State
811 +[[image:1657069922599-794.png]]
755 755  
756 -[[image:image-20220615205416-6.png||height="442" width="884"]]
757 757  
758 758  
759 -=== 5.6.2 LogRead ~-~-> System Log ===
815 += 6.  More features =
760 760  
761 -Show the system log
817 +== 6.1  More instructions ==
762 762  
763 -[[image:1652430369760-511.png||height="373" width="730"]]
764 -
765 -= 6. More features =
766 -
767 -== 6.1 More instructions ==
768 -
769 769  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
770 770  
771 771  
772 -= 7. Linux System =
773 773  
774 -The DLOS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
823 += 7.  Linux System =
775 775  
825 +The LG308N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
776 776  
777 -== 7.1 SSH Access for Linux console ==
778 778  
779 -User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
828 +== 7.1  SSH Access for Linux console ==
780 780  
781 -IP address:  IP address of DLOS8N
830 +User can access the Linux console via the SSH protocol. Make sure your PC and the LG308N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
782 782  
832 +IP address:  IP address of LG308N
833 +
783 783  Port:         22 (via WiFi AP mode) or 2222 (via WAN Interface)
784 784  
785 785  User Name:      (% style="color:green" %)**root**
... ... @@ -786,19 +786,22 @@
786 786  
787 787  Password:         (% style="color:green" %)**dragino** (% style="color:black" %)(default)
788 788  
840 +
789 789  After logging in, you will be in the Linux console and can enter commands as shown below.
790 790  
791 791  [[image:1652431588565-830.png]]
792 792  
845 +
793 793  The “(% class="mark" %)**logread -f**(%%)” command can be used to debug how system runs.
794 794  
795 -[[image:1652431609193-637.png||height="214" width="732"]]
848 +[[image:1657070133275-283.png]]
796 796  
797 797  
798 -== 7.2 Edit and Transfer files ==
799 799  
852 +== 7.2  Edit and Transfer files ==
853 +
800 800  (((
801 -The DLOS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
855 +The LG308N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
802 802  )))
803 803  
804 804  (((
... ... @@ -806,7 +806,7 @@
806 806  )))
807 807  
808 808  (((
809 -After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the DLOS8N, or edit the files directly in the windows.
863 +After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the LG308N, or edit the files directly in the windows.
810 810  )))
811 811  
812 812  (((
... ... @@ -816,25 +816,25 @@
816 816  [[image:1652431650755-450.png]]
817 817  
818 818  
819 -== 7.3 File System ==
873 +== 7.3  File System ==
820 820  
821 821  (((
822 -The DLOS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
823 -)))
824 -
825 825  (((
826 -The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the DLOS8N flash.
877 +The LG308N has a 16MB flash and a 64MB RAM. The /var and /tmp directory are in the RAM, contents stored in /tmp and /var will be erased after reboot the device. Other directories are in the flash and will keep after reboot.
827 827  )))
828 828  
880 +
829 829  (((
830 -You can use an external USB flash memory device to extend the size of flash memory for storage.
882 +The Linux system use around 8MB ~~10MB flash size which means there is not much room for user to store data in the LG308N flash. User can use an external USB flash to extend the size for storage.
831 831  )))
884 +)))
832 832  
833 833  
834 -== 7.4 Package maintenance system ==
835 835  
836 -DLOS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
888 +== 7.4  Package maintenance system ==
837 837  
890 +LG308N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
891 +
838 838  (((
839 839  Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
840 840  )))
... ... @@ -884,15 +884,19 @@
884 884  
885 885  (((
886 886  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
941 +
942 +
943 +
887 887  )))
888 888  
889 -= 8. Upgrade Linux Firmware =
946 += 8.  Upgrade Linux Firmware =
890 890  
891 891  
892 -= 9. FAQ =
893 893  
894 -== 9.1 How can I configure for a customized frequency band? ==
950 += 9.  FAQ =
895 895  
952 +== 9.1  How can I configure for a customized frequency band? ==
953 +
896 896  (((
897 897  See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
898 898  )))
... ... @@ -901,15 +901,15 @@
901 901  
902 902  )))
903 903  
904 -== 9.2 Can I connect DLOS8N to LORIOT? ==
962 +== 9.2  Can I connect DLOS8N to LORIOT? ==
905 905  
906 906  Yes, the set up instruction is here: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
907 907  
908 908  
909 -== 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
967 +== 9.3  Can I make my own firmware for the gateway, where can I find the source code? ==
910 910  
911 911  (((
912 -Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
970 +Yes, You can make your own firmware for the LG308N for branding purposes or to add customized applications.
913 913  )))
914 914  
915 915  (((
... ... @@ -917,11 +917,37 @@
917 917  )))
918 918  
919 919  
920 -== 9.4 Can I use 868Mhz version for 915Mhz bands? ==
978 +== 9.4  Can I use 868Mhz version for 915Mhz bands? ==
921 921  
922 922  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
923 923  
924 924  
983 +== 9.5  Can I control the LEDs? ==
984 +
985 +Except the PWR LED is controlled by +3v3 power directly. All other LEDs can be controlled by developer.
986 +
987 +
988 +(% style="color:blue" %)**Control Globe LED:**
989 +
990 +ON: echo 1 > /sys/class/leds/dragino2\:red\:wlan/brightness 
991 +
992 +OFF: echo 0 > /sys/class/leds/dragino2\:red\:wlan/brightness
993 +
994 +
995 +(% style="color:blue" %)**Control HEART LED:**
996 +
997 +First export the gpio27 and set to out
998 +
999 +echo 27 > /sys/class/gpio/export
1000 +
1001 +echo out > /sys/class/gpio/gpio27/direction
1002 +
1003 +ON: echo 0 > /sys/class/gpio/gpio27/value
1004 +
1005 +OFF: echo 1 > /sys/class/gpio/gpio27/value
1006 +
1007 +
1008 +
925 925  = 10. Trouble Shooting =
926 926  
927 927  == 10.1 I get kernel error when install new package, how to fix? ==
... ... @@ -947,8 +947,9 @@
947 947  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
948 948  
949 949  
950 -== 10.2 How to recover the DLOS8N if the firmware crashes ==
951 951  
1035 +== 10.2  How to recover the LG308N if the firmware crashes ==
1036 +
952 952  (((
953 953  Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
954 954  )))
... ... @@ -957,12 +957,12 @@
957 957  
958 958  )))
959 959  
960 -== 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
1045 +== 10.3 I configured LG308N for WiFi access and lost its IP. What to do now? ==
961 961  
962 -[[image:1652435238615-272.png||height="247" width="727"]]
1047 +[[image:1657071488240-907.png]]
963 963  
964 964  (((
965 -The DLOS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access DLOS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
1050 +The LG308N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access LG308N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
966 966  )))
967 967  
968 968  (% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
... ... @@ -970,19 +970,16 @@
970 970  
971 971  Steps to connect via fall back IP:
972 972  
973 -~1. Connect PC’s Ethernet port to DLOS8N’s WAN port
1058 +~1. Connect PC's Ethernet port to LG01's LAN port
974 974  
975 -2. Configure PC’s Ethernet port has
976 - IP: 172.31.255.253 and
977 - Netmask: 255.255.255.252
1060 +2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
978 978  
979 979  As below photo:
980 980  
981 981  [[image:1652435256286-879.png]]
982 982  
983 -3. In the PC, use IP address 172.31.255.254 to access the DLOS8N via Web or Console.
1066 +3. In PC, use 172.31.255.254 to access LG308N via Web or Console.
984 984  
985 -Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
986 986  
987 987  
988 988  = 11. Order Info =
... ... @@ -991,15 +991,16 @@
991 991  
992 992  (% style="color:#4f81bd" %) **//XXX: Frequency Band//**
993 993  
994 -* (% style="color:#4f81bd" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
995 -* (% style="color:#4f81bd" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1076 +* (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1077 +* (% style="color:red" %)** 915**(% style="color:black" %):  valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
996 996  
1079 +
997 997  (% style="color:#4f81bd" %) **//YYY: 4G Cellular Option//**
998 998  
999 -* (% style="color:#4f81bd" %)** E**(% style="color:black" %): EMEA, Korea, Thailand, India.
1000 -* (% style="color:#4f81bd" %)** A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
1001 -* (% style="color:#4f81bd" %)** AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1002 -* (% style="color:#4f81bd" %)** J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
1082 +* (% style="color:red" %)** EC25-E**(% style="color:black" %): EMEA, Korea, Thailand, India.
1083 +* (% style="color:red" %)** EC25-A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
1084 +* (% style="color:red" %)** EC25-AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1085 +* (% style="color:red" %)** EC25-J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
1003 1003  
1004 1004  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1005 1005  
... ... @@ -1010,10 +1010,11 @@
1010 1010  **Package Includes**:
1011 1011  )))
1012 1012  
1013 -* DLOS8N LoRaWAN Gateway x 1
1096 +* LG308N LoRaWAN Gateway x 1
1014 1014  * Stick Antenna for LoRa RF part. Frequency is one of 470 or 868 or 915Mhz depends the model ordered
1015 1015  * Packaging with environmental protection paper box
1016 1016  
1100 +
1017 1017  (((
1018 1018  **Dimension and weight**:
1019 1019  )))
... ... @@ -1023,6 +1023,9 @@
1023 1023  * Package Size: 49 x 19.5 x x 19Package Size: 4912 cm
1024 1024  * Weight: 2.5kg
1025 1025  
1110 +
1111 +
1112 +
1026 1026  = 13. Support =
1027 1027  
1028 1028  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1657012559318-672.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +151.6 KB
Content
1657012573321-862.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.0 KB
Content
1657012821329-972.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +169.0 KB
Content
1657012860422-990.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +155.0 KB
Content
1657013108723-531.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.2 KB
Content
1657014479765-850.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +169.5 KB
Content
1657014671459-433.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.2 KB
Content
1657014949846-507.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +169.0 KB
Content
1657069890320-513.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +63.2 KB
Content
1657069922599-794.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +58.2 KB
Content
1657070133275-283.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +221.0 KB
Content
1657071488240-907.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +60.0 KB
Content
image-20220705171836-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +157.9 KB
Content
image-20220705171919-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +24.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0