Last modified by Kilight Cao on 2025/02/07 08:57
<
From version < 104.1 >
edited by Xiaoling
on 2022/07/05 16:54
To version < 123.4 >
edited by Xiaoling
on 2022/07/06 09:46
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -50,7 +50,7 @@
50 50  == 1.2  Specifications ==
51 51  
52 52  
53 -**Hardware System:**
53 +(% style="color:#037691" %)**Hardware System:**
54 54  
55 55  (((
56 56   Linux Part:
... ... @@ -60,10 +60,8 @@
60 60  * 64MB RAM
61 61  * 16MB Flash
62 62  
63 +(% style="color:#037691" %)**Interface:**
63 63  
64 -
65 -**Interface:**
66 -
67 67  * 10M/100M RJ45 Ports x 2
68 68  * WiFi : 802.11 b/g/n
69 69  * LoRaWAN Wireless
... ... @@ -73,10 +73,8 @@
73 73  * Mini-PCI E connector x 1
74 74  * SX1302 + 2 x SX1250
75 75  
74 +(% style="color:#037691" %)**WiFi Spec:**
76 76  
77 -
78 -**WiFi Spec:**
79 -
80 80  * IEEE 802.11 b/g/n
81 81  * Frequency Band: 2.4 ~~ 2.462GHz
82 82  * Tx power:
... ... @@ -88,10 +88,8 @@
88 88  ** 11g 54M : -71dbm
89 89  ** 11n 20M : -67dbm
90 90  
87 +(% style="color:#037691" %)**LoRa Spec:**
91 91  
92 -
93 -**LoRa Spec:**
94 -
95 95  * Up to -142.5 dBm sensitivity with SX1250 Tx/Rx front-end
96 96  * 70 dB CW interferer rejection at 1 MHz offset
97 97  * Able to operate with negative SNR, CCR up to 9dB
... ... @@ -101,10 +101,8 @@
101 101  * Dynamic data-rate (DDR) adaptation
102 102  * True antenna diversity or simultaneous dual-band operation
103 103  
98 +(% style="color:#037691" %)**Cellular 4G LTE (optional):**
104 104  
105 -
106 -**Cellular 4G LTE (optional):**
107 -
108 108  * Quectel: [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
109 109  * Standard Size SIM Slot
110 110  * 2 x 4G Sticker Antenna.
... ... @@ -112,8 +112,6 @@
112 112  * Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
113 113  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
114 114  
115 -
116 -
117 117  == 1.3  Features ==
118 118  
119 119  
... ... @@ -123,9 +123,6 @@
123 123  * LoRaWAN Gateway
124 124  * 10 programmable parallel demodulation paths
125 125  
126 -
127 -
128 -
129 129  == 1.4  Hardware System Structure ==
130 130  
131 131  [[image:1657011152828-178.png]]
... ... @@ -141,88 +141,93 @@
141 141  
142 142  LG308N has totally 6 LEDs, They are:
143 143  
144 -[[image:1652411720670-489.png]]
131 +* **Power LED **[[image:image-20220705165446-1.png||height="21" width="22"]] : This (% style="color:red" %)**LED**(%%) will be **solid on** if the device is properly powered.
132 +* **HEART LED **[[image:image-20220705165446-2.png||height="19" width="18"]] : No function yet. 
133 +* **SYS LED** [[image:image-20220705165446-3.png||height="20" width="19"]] :  This** LED** will shows different colors on different state:
134 +** (% style="color:red" %)**SOLID**(%%):  Device is alive with LoRaWAN server connection.
135 +** (% style="color:red" %)**BLINKING**(%%)**:**  a) Device has internet connection but no LoRaWAN Connection.  or  b) Device is in booting stage, in this stage, it will (% style="color:red" %)**BLINKING**(%%)** **for several seconds.
136 +** (% style="color:red" %)**OFF**(%%):  Device doesn't have Internet connection.
145 145  
138 +* **ETH LED**[[image:image-20220705165446-4.png||height="19" width="22"]] [[image:image-20220705165446-5.png||height="18" width="20"]] : These two LEDs show the ETH interfaces connection status.
139 +* **WiFi LED** [[image:image-20220705165446-6.png||height="19" width="19"]]** **:  This LED shows the WiFi interface connection status.
146 146  
147 -There is a waterproof triple color LED on DLOS8N enclosure, the meaning of the LED is:
141 +(% style="color:red" %)**Note: Above LED indication are for firmware version > LG02_LG08~-~-build-v5.3.1584002217-20200312-1639**
148 148  
143 +
149 149  (((
150 150  (((
151 -* (((
152 -(% style="color:green" %)**SOLID GREEN**: (% style="color:black" %)DLOS8N is alive with LoRaWAN server connection.
153 -)))
154 -)))
155 -
156 -* (((
157 -(% style="color:green" %)**BLINKING GREEN**:(% style="color:black" %) a) Device has internet connection but no LoRaWAN Connection.  or b) Device is in booting stage, in this stage, it will (% style="color:green" %)**BLINKING GREEN**(% style="color:black" %) for several seconds and then (% style="color:red" %)**RED** (% style="color:black" %)and (% style="color:#ffc000" %)**YELLOW** (% style="color:black" %)will blink together.
158 -)))
159 -* (((
160 -(% style="color:red" %)**SOLID RED**: (% style="color:black" %)Device doesn’t have Internet connection.
161 -
162 -
163 -
164 164  
165 165  )))
166 166  )))
167 167  
168 -== 1.7 WiFi Direction ==
150 += 2.  Access and Configure LG308N =
169 169  
170 -DLOS8N use directional WiFi Antenna. The best direction is as below:
152 +The LG308N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
171 171  
172 -[[image:1652412859663-161.png||height="341" width="333"]]
173 173  
174 -= 2. Access and Configure DLOS8N =
155 +== 2.1  Find IP address of LG308N ==
175 175  
176 -The DLOS8N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
157 +=== 2.1.1  Connect via WiFi ===
177 177  
159 +[[image:1657011715859-829.png]]
178 178  
179 -== 2.1 Find IP address of DLOS8N ==
180 180  
181 -=== 2.1.1 Connect via WiFi ===
162 +At the first boot of LG308N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
182 182  
183 -[[image:1652412985720-934.png]]
164 +(% style="color:red" %)Note: In latest version firmware, it has been password protected and the password is: dragino+dragino
184 184  
185 -At the first boot of DLOS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password:
186 -
187 187  [[image:1652413127647-377.png]]
188 188  
189 -(% style="background-color:#ffffcc" %)dragino+dragino
190 190  
191 191  (((
192 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
170 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LG308N has the default IP (% style="color:green" %)10.130.1.1
193 193  
194 194  
195 195  )))
196 196  
197 -=== 2.1.2 Connect via Ethernet with DHCP IP from router ===
175 +=== 2.1.2  Connect via WAN port with DHCP IP from router ===
198 198  
199 -[[image:1652414114583-532.png]]
177 +[[image:1657011966663-484.png]]
200 200  
201 -
202 202  (((
203 -Alternatively, connect the DLOS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the DLOS8N. You can also use this IP to connect.
180 +Alternatively, connect the LG308N** __WAN port__** to your router and LG308N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG308N. You can also use this IP to connect.
181 +)))
204 204  
183 +
184 +(((
205 205  
206 206  )))
207 207  
208 -=== 2.1.3 Connect via WiFi with DHCP IP from router ===
188 +=== 2.1.3  Connect via LAN port with direct connection from PC ===
209 209  
210 -[[image:1652414137639-956.png]]
190 +[[image:1657012061799-674.png]]
211 211  
192 +(((
193 +The LG308N __**LAN port**__ is configured as DHCP router by default, user can connect the PC to LAN port and set PC to DHCP mode, it will get IP from LAN port and be able to access to the device. The default IP in LAN port is 10.130.1.1
194 +)))
212 212  
213 -If the DLOS8N already connect to the router via WiFi, use can use the WiFi IP to connect to DLOS8N.
214 214  
215 215  
216 -=== 2.1.4 Connect via Ethernet with fall back ip ===
198 +=== 2.1.4  Connect WiFi with DHCP IP from router ===
217 217  
218 -The WAN port also has a [[fall back ip address>>path:#_I_configured_LPS8]] for access if user doesn’t connect to uplink router. Click [[here>>path:#_I_configured_LPS8]] to see how to configure.
200 +[[image:image-20220705171041-7.png]]
219 219  
220 220  
221 -== 2.2 Access Configure Web UI ==
203 +If the LG308N already connect to the router via WiFi, use can use the WiFi IP to connect to LG308N.
222 222  
205 +
206 +
207 +=== 2.1.5  Connect via LAN port by fall back ip ===
208 +
209 +The **LAN port** also has a [[fall back ip address>>path:#fallback_ip]] for access if user doesn't connect to uplink router.
210 +
211 +
212 +
213 +== 2.2  Access Configure Web UI ==
214 +
223 223  **Web Interface**
224 224  
225 -Open a browser on the PC and type the DLOS8N ip address (depends on your connect method)
217 +Open a browser on the PC and type the LG308N ip address (depends on your connect method)
226 226  
227 227  [[http:~~/~~/10.130.1.1/>>url:http://10.130.1.1/]] (Access via WiFi AP network)
228 228  
... ... @@ -241,34 +241,36 @@
241 241  
242 242  [[image:1652414287022-223.png]]
243 243  
244 -= 3. Typical Network Setup =
245 245  
246 -== 3.1 Overview ==
237 += 3.  Typical Network Setup =
247 247  
248 -The DLOS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
239 +== 3.1  Overview ==
249 249  
241 +(((
242 +LG308N supports flexible network set up for different environment. This section describes the typical network topology can be set in LG308N. The typical network set up includes:
243 +)))
244 +
250 250  * **WAN Port Internet Mode**
251 251  * **WiFi Client Mode**
252 252  * **WiFi AP Mode**
253 253  * **Cellular Mode**
254 254  
250 +== 3.2  Use WAN port to access Internet ==
255 255  
256 -== 3.2 Use WAN port to access Internet ==
257 -
258 258  By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N’s WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
259 259  
260 -[[image:1652420169255-959.png]]
254 +[[image:1657012559318-672.png]]
261 261  
262 262  
263 263  == 3.3 Access the Internet as a WiFi Client ==
264 264  
265 -In the WiFi Client Mode, DLOS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
259 +In the WiFi Client Mode, LG308N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
266 266  
267 267  (((
268 268  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
269 269  )))
270 270  
271 -[[image:1652420327792-211.png]]
265 +[[image:1657012573321-862.png]]
272 272  
273 273  (((
274 274  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
... ... @@ -276,19 +276,21 @@
276 276  
277 277  )))
278 278  
279 -== 3.4 Access the Internet via Cellular ==
273 +== 3.4  Use built-in 4G modem for internet access ==
280 280  
281 -If the DLOS8N support 3G/4G Cellular modem option, When the label on the shell is displayed as Model : DLOS8N-EC25, it indicates that DLOS8 already has EC25 3G/4G modules,user can use it as main internet connection or back up.
275 +If the LG308N has 3G/4G Cellular modem, user can use it as main internet connection or back up.
282 282  
283 -(((
284 -First, release the four screws of DLOS8N, pull out PCB and install SIM card as below:
285 -)))
286 286  
287 -[[image:1652420606018-181.png]]
278 +First, install the Micro SIM card as below direction
288 288  
280 +Second, Power off/ ON LG308N to let it detect the SIM card.
289 289  
282 +[[image:image-20220705171836-8.png]]
283 +
284 +
285 +
290 290  (((
291 -[[image:1652420718132-929.png||height="427" width="727"]]
287 +
292 292  )))
293 293  
294 294  (((
... ... @@ -297,53 +297,55 @@
297 297  
298 298  (((
299 299  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
296 +
297 +
300 300  )))
301 301  
302 302  (((
303 -[[image:1652421032117-341.png||height="329" width="752"]]
301 +[[image:image-20220705171919-9.png]]
304 304  )))
305 305  
306 -(% style="color:red" %)**Note** *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
307 307  
305 +== 3.5  Check Internet connection ==
308 308  
309 -== 3.5 Check Internet connection ==
310 -
311 311  In the (% style="color:#4f81bd" %)**home**(%%) page, we can check the Internet connection.
312 312  
313 313  * GREEN Tick ​​​​ [[image:1652436675869-206.png||height="14" width="15"]] : This interface has Internet connection.
314 -* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don’t use it for internet connection.
315 -* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn’t connected.
310 +* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don't use it for internet connection.
311 +* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn't connected.
316 316  
317 -[[image:1652421351382-793.png||height="339" width="765"]]
313 +[[image:1657012821329-972.png]]
318 318  
319 319  
320 -= 4. Example: Configure as a LoRaWAN gateway =
316 += 4.  Example: Configure as a LoRaWAN gateway =
321 321  
322 -DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
318 +LG308N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
323 323  
324 324  (((
325 -[[image:image-20220513140429-1.png||height="565" width="824"]]
321 +[[image:1657012860422-990.png]]
326 326  )))
327 327  
328 -This chapter describes how to use the DLOS8Nto work with
324 +This chapter describes how to use the LG308N to work with(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
329 329  
330 -TheThingsNetwork v3(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
331 331  
327 +== 4.1  Create a gateway in TTN V3 Server ==
332 332  
333 -== 4.1 Create a gateway in TTN V3 Server ==
334 334  
335 335  (% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
336 336  
337 337  (((
338 -Every DLOS8N has a unique gateway id. The ID can be found at LoRaWAN page:
333 +Every LG308N has a unique gateway id. The ID can be found at LoRaWAN page:
339 339  )))
340 340  
341 341  (((
342 -[[image:1652421929753-168.png||height="403" width="739"]]
337 +[[image:1657013108723-531.png]]
338 +
339 +
343 343  )))
344 344  
345 -The example gateway id is: **a840411e96744154**
342 +The example gateway id is: (% style="color:green" %)**a840411e96744154**
346 346  
344 +
347 347  (% style="color:#4f81bd" %)**Step 2: Sign up a user account in TTN server**
348 348  
349 349  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
... ... @@ -350,6 +350,7 @@
350 350  
351 351  [[image:1652422127479-258.png||height="346" width="738"]]
352 352  
351 +
353 353  (% style="color:#4f81bd" %)**Step 3: Choose the TTNv3 Cluster Picker**
354 354  
355 355  (((
... ... @@ -358,11 +358,12 @@
358 358  
359 359  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
360 360  
361 -* Europe 1 (% style="color:red" %)corresponding Gateway server address: (% style="color:black" %)eu1.cloud.thethings.network
362 -* North America 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)nam1.cloud.thethings.network
363 -* Australia 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)au1.cloud.thethings.network
364 -* Legacy V2 Console : (% style="color:red" %)TTN v2 shuts down in December 2021
365 365  
361 +* Europe 1 (% style="color:red" %)**corresponding Gateway server address:** (% style="color:black" %)eu1.cloud.thethings.network
362 +* North America 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)nam1.cloud.thethings.network
363 +* Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
364 +* Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
365 +
366 366  (% style="color:#4f81bd" %)**Step 4: Create a Gateway**
367 367  
368 368  [[image:1652422440891-514.png||height="360" width="747"]]
... ... @@ -373,8 +373,10 @@
373 373  
374 374   [[image:1652422470352-518.png||height="391" width="716"]]
375 375  
376 +
376 376  [[image:1652422479876-297.png||height="398" width="729"]]
377 377  
379 +
378 378  (((
379 379  (% style="color:red" %)**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
380 380  )))
... ... @@ -384,14 +384,14 @@
384 384  [[image:1652422509034-682.png||height="299" width="739"]]
385 385  
386 386  
387 -== 4.2 Configure DLOS8N to connect to TTN v3 ==
389 +== 4.2  Configure DLOS8N to connect to TTN v3 ==
388 388  
389 389  (((
390 -You can now configure the DLOS8N to let it connect to TTN network V3.
392 +You can now configure the LG308N to let it connect to TTN network V3.
391 391  )))
392 392  
393 393  (((
394 -Make sure your DLOS8N has a working Internet Connection first.
396 +Make sure your LG308N has a working Internet Connection first.
395 395  )))
396 396  
397 397  (((
... ... @@ -402,19 +402,22 @@
402 402  
403 403  (% style="color:red" %)**Note: **The server address must match the Gateway server address you choose in TTN V3.
404 404  
407 +
405 405  In the home page, we can see the LoRaWAN connection is ready now.
406 406  
407 -[[image:1652422685063-596.png||height="327" width="729"]]
410 +[[image:1657014479765-850.png]]
408 408  
412 +
409 409  In TTN v3 portal, we can also see the gateway is connected.
410 410  
411 411  [[image:1652422703020-955.png||height="343" width="730"]]
412 412  
413 413  
414 -== 4.3 Configure frequency ==
418 +== 4.3  Configure frequency ==
415 415  
416 -We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
420 +We also need to set the frequency plan in LG308N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
417 417  
422 +
418 418  [[image:1652422737399-529.png||height="362" width="737"]]
419 419  
420 420  
... ... @@ -423,7 +423,7 @@
423 423   [[image:1652422763536-750.png||height="514" width="730"]]
424 424  
425 425  
426 -== 4.4 Add a LoRaWAN End Device ==
431 +== 4.4  Add a LoRaWAN End Device ==
427 427  
428 428  (((
429 429  This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
... ... @@ -448,13 +448,18 @@
448 448  * APP Key - Unique key to secure communications with a particular device.
449 449  
450 450  (((
456 +
457 +
451 451  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
452 452  )))
453 453  
454 454  [[image:1652422840936-838.png]]
455 455  
463 +
456 456  (((
457 457  (% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
466 +
467 +
458 458  )))
459 459  
460 460  (((
... ... @@ -465,10 +465,12 @@
465 465  Select **Add Application** to open the screen below.
466 466  )))
467 467  
468 -[[image:1652422946999-255.png||height="356" width="744"]]
478 +[[image:1657014671459-433.png]]
469 469  
480 +
470 470  Open the **Application **select** Add end device**
471 471  
483 +
472 472  Start Register the end device
473 473  
474 474  [[image:1652422975885-591.png||height="359" width="726"]]
... ... @@ -475,6 +475,8 @@
475 475  
476 476  (((
477 477  Select OTAA activation mode
490 +
491 +
478 478  )))
479 479  
480 480  (((
... ... @@ -485,14 +485,18 @@
485 485  
486 486  First, input the End device ID, AppEUI and DevEUI.
487 487  
502 +
488 488  [[image:1652423022781-339.png||height="365" width="741"]]
489 489  
490 490  Secondly, choose the corresponding frequency and LoRaWAN class capabilities.
491 491  
507 +
492 492  [[image:1652423046741-467.png||height="355" width="736"]]
493 493  
494 494  (((
495 495  Finally, Application layer settings input the corresponding AppKey. Before saving the configuration, check that the data matches the device.
512 +
513 +
496 496  )))
497 497  
498 498  (((
... ... @@ -506,18 +506,18 @@
506 506  [[image:1652423277549-324.png||height="273" width="745"]]
507 507  
508 508  
509 -= 5. Web Configure Pages =
527 += 5.  Web Configure Pages =
510 510  
511 -== 5.1 Home ==
529 +== 5.1  Home ==
512 512  
513 513  Shows the system running status.
514 514  
515 -[[image:1652423418568-752.png||height="329" width="724"]]
533 +[[image:1657014949846-507.png]]
516 516  
517 517  
518 -== 5.2 LoRa Settings ==
536 +== 5.2  LoRa Settings ==
519 519  
520 -=== 5.2.1 LoRa ~-~-> LoRa ===
538 +=== 5.2.1  LoRa ~-~-> LoRa ===
521 521  
522 522  (((
523 523  This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customized the band* as well.
... ... @@ -524,11 +524,11 @@
524 524  )))
525 525  
526 526  (((
527 -Different DLOS8N hardware version can support different frequency range:
545 +Different LG308N hardware version can support different frequency range:
528 528  )))
529 529  
530 -* **868**: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
531 -* **915**: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
548 +* (% style="color:blue" %)**868**(%%): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
549 +* (% style="color:blue" %)**915**(%%): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
532 532  
533 533  (((
534 534  After user choose the frequency plan, he can see the actually frequency in used by checking the page **LogRead ~-~-> LoRa Log**
... ... @@ -539,14 +539,16 @@
539 539  Note *: **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
540 540  
541 541  
542 -=== 5.2.2 LoRa ~-~-> ABP Decryption ===
560 +=== 5.2.2  LoRa ~-~-> ABP Decryption ===
543 543  
544 -The DLOS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
562 +The LG308N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
545 545  
546 546  * No internet connection.
547 547  * User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>doc:Main.MQTT Forward Instruction.WebHome]]).
548 548  
549 549  (((
568 +
569 +
550 550  Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
551 551  )))
552 552  
... ... @@ -553,9 +553,9 @@
553 553  [[image:1652423628833-467.png||height="357" width="755"]]
554 554  
555 555  
556 -== 5.3 LoRaWAN Settings ==
576 +== 5.3  LoRaWAN Settings ==
557 557  
558 -=== 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
578 +=== 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
559 559  
560 560  This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc
561 561  
... ... @@ -570,8 +570,9 @@
570 570  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
571 571  
572 572  
573 -=== 5.3.2 LoRaWAN ~-~-> Amazon AWS-IoT ===
574 574  
594 +=== 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
595 +
575 575  [[image:1652428499323-384.png||height="275" width="723"]]
576 576  
577 577  
... ... @@ -578,10 +578,11 @@
578 578  (((
579 579  Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
580 580  
602 +
581 581  
582 582  )))
583 583  
584 -=== 5.3.3 LoRaWAN ~-~-> LORIOT ===
606 +=== 5.3.3  LoRaWAN ~-~-> LORIOT ===
585 585  
586 586  (((
587 587  Settings to communicate to LORIOT LoRaWAN Network Server: [[https:~~/~~/www.loriot.io/>>url:https://www.loriot.io/]]
... ... @@ -594,9 +594,9 @@
594 594  [[image:1652428648903-878.png||height="266" width="731"]]
595 595  
596 596  
597 -== 5.4 MQTT Settings ==
619 +== 5.4  MQTT Settings ==
598 598  
599 -If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
621 +If end nodes works in ABP mode, user can configure LG308N to transfer the data to MQTT broker,
600 600  
601 601  Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
602 602  
... ... @@ -604,17 +604,19 @@
604 604  [[image:1652428705046-212.png||height="417" width="733"]]
605 605  
606 606  
607 -== 5.5 System ==
608 608  
609 -=== 5.5.1 System ~-~-> System Overview ===
630 +== 5.5  System ==
610 610  
632 +=== 5.5.1  System ~-~-> System Overview ===
633 +
611 611  Shows the system info:
612 612  
613 613  [[image:1652428773760-580.png||height="408" width="728"]]
614 614  
615 615  
616 -=== 5.5.2 System ~-~-> General ( login settings) ===
617 617  
640 +=== 5.5.2  System ~-~-> General ( login settings) ===
641 +
618 618  [[image:1652428861256-300.png||height="354" width="724"]]
619 619  
620 620  (((
... ... @@ -622,7 +622,7 @@
622 622  )))
623 623  
624 624  (((
625 -There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
649 +There are two login for DLOS8: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
626 626  )))
627 627  
628 628  (((
... ... @@ -630,56 +630,60 @@
630 630  )))
631 631  
632 632  (((
633 -**__Timezone:__**Set device timezone.
657 +**__Timezone: __**Set device timezone.
634 634  )))
635 635  
636 636  (((
637 -**__Port forwarding:__**Enable/Disable the HTTP and SSH access via WAN interface.
661 +**__Port forwarding: __**Enable/Disable the HTTP and SSH access via WAN interface.
638 638  
663 +
639 639  
640 640  )))
641 641  
642 -=== 5.5.3 System ~-~-> Network ===
667 +=== 5.5.3  System ~-~-> Network ===
643 643  
644 644  [[image:1652429149053-824.png||height="467" width="725"]]
645 645  
646 646  (((
647 -**__LAN Settings:__**When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
672 +**__LAN Settings:  __**When the LG308N has the AP enable, LAN settings specify the network info for LG308N's own network.
648 648  )))
649 649  
650 650  (((
651 -__**WAN Settings:**__Setting for DLOS8N WAN port
676 +__**WAN Settings: **__Setting for LG308N WAN port
652 652  )))
653 653  
654 654  (((
655 -__**WiFi Settings:**__Setting for DLOS8N WiFi IP when use it as WiFi Client
656 -
657 -
680 +__**WiFi Settings:  **__Setting for LG308N WiFi IP when use it as WiFi Client
658 658  )))
659 659  
660 -=== 5.5.4 System ~-~-> WiFi ===
661 661  
662 -DLOS8N WiFi Settings.
663 663  
685 +=== 5.5.4  System ~-~-> WiFi ===
686 +
687 +LG308N WiFi Settings.
688 +
664 664  [[image:1652429430767-921.png||height="367" width="723"]]
665 665  
666 666  
667 -=== 5.5.5 System ~-~-> Cellular ===
668 668  
693 +=== 5.5.5  System ~-~-> Cellular ===
694 +
669 669  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
670 670  
671 671  [[image:1652429309615-825.png||height="320" width="732"]]
672 672  
673 -(% style="color:red" %)Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
699 +(% style="color:red" %)Note *: For LG308N which doesn't have the cellular module, this page will shows Cellular not detected.
674 674  
675 675  
676 -=== 5.5.6 System ~-~-> Network Status ===
677 677  
703 +=== 5.5.6  System ~-~-> Network Status ===
704 +
678 678  [[image:1652429486609-208.png||height="415" width="728"]]
679 679  
680 680  
681 -=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
682 682  
709 +=== 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
710 +
683 683  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
684 684  
685 685  [[image:1652429518191-846.png||height="332" width="733"]]
... ... @@ -690,8 +690,10 @@
690 690  
691 691  Please see this document for detail:
692 692  
721 +[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
722 +
693 693  (((
694 -[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
724 +
695 695  )))
696 696  
697 697  
... ... @@ -700,8 +700,9 @@
700 700  [[image:1652429624400-864.png||height="432" width="716"]]
701 701  
702 702  
703 -=== 5.5.8 System ~-~-> Firmware Upgrade ===
704 704  
734 +=== 5.5.8  System ~-~-> Firmware Upgrade ===
735 +
705 705  We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
706 706  
707 707  * **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
... ... @@ -708,10 +708,12 @@
708 708  
709 709  ( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]] )
710 710  
742 +
711 711  * **Change Log**: [[Firmware Change Log>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]].
712 712  
713 713  ( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
714 714  
747 +
715 715  (((
716 716  The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
717 717  )))
... ... @@ -722,6 +722,7 @@
722 722  
723 723  [[image:1652429711145-862.png||height="270" width="737"]]
724 724  
758 +
725 725  Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
726 726  
727 727  (% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
... ... @@ -736,18 +736,22 @@
736 736  
737 737  (% style="color:#4f81bd" %)**//root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
738 738  
773 +
739 739  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
740 740  
741 741  
742 -=== 5.5.9 System ~-~-> Reboot/Reset ===
743 743  
778 +=== 5.5.9  System ~-~-> Reboot/Reset ===
779 +
744 744  [[image:1652430197132-330.png||height="256" width="724"]]
745 745  
746 746  (((
747 747  
784 +
785 +
748 748  )))
749 749  
750 -=== 5.5.10 System ~-~-> Package Maintain ===
788 +=== 5.5.10  System ~-~-> Package Maintain ===
751 751  
752 752  [[image:1652430243826-126.png||height="289" width="723"]]
753 753  
... ... @@ -754,52 +754,45 @@
754 754  Place to show what package has installed and possible to upgrade packages.
755 755  
756 756  
757 -== 5.6 LogRead ==
758 758  
759 -=== 5.6.1 LogRead ~-~-> LoRa Log ===
796 +== 5.6  LogRead ==
760 760  
798 +=== 5.6.1  LogRead ~-~-> LoRa Log ===
761 761  
762 762  Show the frequency for LoRa Radio and traffics.
763 763  
764 -[[image:image-20220615204306-1.png||height="575" width="733"]]
802 +[[image:1657069890320-513.png]]
765 765  
766 766  
767 -Show the IoT Server Connection State and FWD State
768 768  
769 -[[image:image-20220616083933-1.png||height="556" width="729"]]
770 770  
771 -DLOS8 can view GPS location in the Logread FWD State
807 +=== 5.6.2  LogRead ~-~-> System Log ===
772 772  
809 +Show the system log
773 773  
774 -Show the Error logs, RxTxJson lorawan packages, and PULL State
811 +[[image:1657069922599-794.png]]
775 775  
776 -[[image:image-20220615205416-6.png||height="442" width="884"]]
777 777  
778 778  
779 -=== 5.6.2 LogRead ~-~-> System Log ===
815 += 6.  More features =
780 780  
781 -Show the system log
817 +== 6.1  More instructions ==
782 782  
783 -[[image:1652430369760-511.png||height="373" width="730"]]
784 -
785 -= 6. More features =
786 -
787 -== 6.1 More instructions ==
788 -
789 789  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
790 790  
791 791  
792 -= 7. Linux System =
793 793  
794 -The DLOS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
823 += 7.  Linux System =
795 795  
825 +The LG308N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
796 796  
797 -== 7.1 SSH Access for Linux console ==
798 798  
799 -User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
828 +== 7.1  SSH Access for Linux console ==
800 800  
801 -IP address:  IP address of DLOS8N
830 +User can access the Linux console via the SSH protocol. Make sure your PC and the LG308N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
802 802  
832 +IP address:  IP address of LG308N
833 +
803 803  Port:         22 (via WiFi AP mode) or 2222 (via WAN Interface)
804 804  
805 805  User Name:      (% style="color:green" %)**root**
... ... @@ -806,19 +806,22 @@
806 806  
807 807  Password:         (% style="color:green" %)**dragino** (% style="color:black" %)(default)
808 808  
840 +
809 809  After logging in, you will be in the Linux console and can enter commands as shown below.
810 810  
811 811  [[image:1652431588565-830.png]]
812 812  
845 +
813 813  The “(% class="mark" %)**logread -f**(%%)” command can be used to debug how system runs.
814 814  
815 -[[image:1652431609193-637.png||height="214" width="732"]]
848 +[[image:1657070133275-283.png]]
816 816  
817 817  
818 -== 7.2 Edit and Transfer files ==
819 819  
852 +== 7.2  Edit and Transfer files ==
853 +
820 820  (((
821 -The DLOS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
855 +The LG308N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
822 822  )))
823 823  
824 824  (((
... ... @@ -826,7 +826,7 @@
826 826  )))
827 827  
828 828  (((
829 -After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the DLOS8N, or edit the files directly in the windows.
863 +After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the LG308N, or edit the files directly in the windows.
830 830  )))
831 831  
832 832  (((
... ... @@ -836,25 +836,25 @@
836 836  [[image:1652431650755-450.png]]
837 837  
838 838  
839 -== 7.3 File System ==
873 +== 7.3  File System ==
840 840  
841 841  (((
842 -The DLOS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
843 -)))
844 -
845 845  (((
846 -The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the DLOS8N flash.
877 +The LG308N has a 16MB flash and a 64MB RAM. The /var and /tmp directory are in the RAM, contents stored in /tmp and /var will be erased after reboot the device. Other directories are in the flash and will keep after reboot.
847 847  )))
848 848  
880 +
849 849  (((
850 -You can use an external USB flash memory device to extend the size of flash memory for storage.
882 +The Linux system use around 8MB ~~10MB flash size which means there is not much room for user to store data in the LG308N flash. User can use an external USB flash to extend the size for storage.
851 851  )))
884 +)))
852 852  
853 853  
854 -== 7.4 Package maintenance system ==
855 855  
856 -DLOS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
888 +== 7.4  Package maintenance system ==
857 857  
890 +LG308N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
891 +
858 858  (((
859 859  Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
860 860  )))
... ... @@ -904,15 +904,19 @@
904 904  
905 905  (((
906 906  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
941 +
942 +
943 +
907 907  )))
908 908  
909 -= 8. Upgrade Linux Firmware =
946 += 8.  Upgrade Linux Firmware =
910 910  
911 911  
912 -= 9. FAQ =
913 913  
914 -== 9.1 How can I configure for a customized frequency band? ==
950 += 9.  FAQ =
915 915  
952 +== 9.1  How can I configure for a customized frequency band? ==
953 +
916 916  (((
917 917  See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
918 918  )))
... ... @@ -921,15 +921,15 @@
921 921  
922 922  )))
923 923  
924 -== 9.2 Can I connect DLOS8N to LORIOT? ==
962 +== 9.2  Can I connect DLOS8N to LORIOT? ==
925 925  
926 926  Yes, the set up instruction is here: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
927 927  
928 928  
929 -== 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
967 +== 9.3  Can I make my own firmware for the gateway, where can I find the source code? ==
930 930  
931 931  (((
932 -Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
970 +Yes, You can make your own firmware for the LG308N for branding purposes or to add customized applications.
933 933  )))
934 934  
935 935  (((
... ... @@ -937,11 +937,37 @@
937 937  )))
938 938  
939 939  
940 -== 9.4 Can I use 868Mhz version for 915Mhz bands? ==
978 +== 9.4  Can I use 868Mhz version for 915Mhz bands? ==
941 941  
942 942  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
943 943  
944 944  
983 +== 9.5  Can I control the LEDs? ==
984 +
985 +Except the PWR LED is controlled by +3v3 power directly. All other LEDs can be controlled by developer.
986 +
987 +
988 +(% style="color:blue" %)**Control Globe LED:**
989 +
990 +ON: echo 1 > /sys/class/leds/dragino2\:red\:wlan/brightness 
991 +
992 +OFF: echo 0 > /sys/class/leds/dragino2\:red\:wlan/brightness
993 +
994 +
995 +(% style="color:blue" %)**Control HEART LED:**
996 +
997 +First export the gpio27 and set to out
998 +
999 +echo 27 > /sys/class/gpio/export
1000 +
1001 +echo out > /sys/class/gpio/gpio27/direction
1002 +
1003 +ON: echo 0 > /sys/class/gpio/gpio27/value
1004 +
1005 +OFF: echo 1 > /sys/class/gpio/gpio27/value
1006 +
1007 +
1008 +
945 945  = 10. Trouble Shooting =
946 946  
947 947  == 10.1 I get kernel error when install new package, how to fix? ==
... ... @@ -967,8 +967,9 @@
967 967  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
968 968  
969 969  
970 -== 10.2 How to recover the DLOS8N if the firmware crashes ==
971 971  
1035 +== 10.2  How to recover the LG308N if the firmware crashes ==
1036 +
972 972  (((
973 973  Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
974 974  )))
... ... @@ -977,12 +977,12 @@
977 977  
978 978  )))
979 979  
980 -== 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
1045 +== 10.3 I configured LG308N for WiFi access and lost its IP. What to do now? ==
981 981  
982 -[[image:1652435238615-272.png||height="247" width="727"]]
1047 +[[image:1657071488240-907.png]]
983 983  
984 984  (((
985 -The DLOS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access DLOS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
1050 +The LG308N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access LG308N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
986 986  )))
987 987  
988 988  (% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
... ... @@ -990,19 +990,16 @@
990 990  
991 991  Steps to connect via fall back IP:
992 992  
993 -~1. Connect PC’s Ethernet port to DLOS8N’s WAN port
1058 +~1. Connect PC's Ethernet port to LG01's LAN port
994 994  
995 -2. Configure PC’s Ethernet port has
996 - IP: 172.31.255.253 and
997 - Netmask: 255.255.255.252
1060 +2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
998 998  
999 999  As below photo:
1000 1000  
1001 1001  [[image:1652435256286-879.png]]
1002 1002  
1003 -3. In the PC, use IP address 172.31.255.254 to access the DLOS8N via Web or Console.
1066 +3. In PC, use 172.31.255.254 to access LG308N via Web or Console.
1004 1004  
1005 -Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1006 1006  
1007 1007  
1008 1008  = 11. Order Info =
... ... @@ -1011,15 +1011,16 @@
1011 1011  
1012 1012  (% style="color:#4f81bd" %) **//XXX: Frequency Band//**
1013 1013  
1014 -* (% style="color:#4f81bd" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1015 -* (% style="color:#4f81bd" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1076 +* (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1077 +* (% style="color:red" %)** 915**(% style="color:black" %):  valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1016 1016  
1079 +
1017 1017  (% style="color:#4f81bd" %) **//YYY: 4G Cellular Option//**
1018 1018  
1019 -* (% style="color:#4f81bd" %)** E**(% style="color:black" %): EMEA, Korea, Thailand, India.
1020 -* (% style="color:#4f81bd" %)** A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
1021 -* (% style="color:#4f81bd" %)** AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1022 -* (% style="color:#4f81bd" %)** J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
1082 +* (% style="color:red" %)** EC25-E**(% style="color:black" %): EMEA, Korea, Thailand, India.
1083 +* (% style="color:red" %)** EC25-A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
1084 +* (% style="color:red" %)** EC25-AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1085 +* (% style="color:red" %)** EC25-J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
1023 1023  
1024 1024  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1025 1025  
... ... @@ -1030,10 +1030,11 @@
1030 1030  **Package Includes**:
1031 1031  )))
1032 1032  
1033 -* DLOS8N LoRaWAN Gateway x 1
1096 +* LG308N LoRaWAN Gateway x 1
1034 1034  * Stick Antenna for LoRa RF part. Frequency is one of 470 or 868 or 915Mhz depends the model ordered
1035 1035  * Packaging with environmental protection paper box
1036 1036  
1100 +
1037 1037  (((
1038 1038  **Dimension and weight**:
1039 1039  )))
... ... @@ -1044,6 +1044,8 @@
1044 1044  * Weight: 2.5kg
1045 1045  
1046 1046  
1111 +
1112 +
1047 1047  = 13. Support =
1048 1048  
1049 1049  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1657011715859-829.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.4 KB
Content
1657011966663-484.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +51.7 KB
Content
1657012061799-674.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +57.1 KB
Content
1657012559318-672.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +151.6 KB
Content
1657012573321-862.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.0 KB
Content
1657012821329-972.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +169.0 KB
Content
1657012860422-990.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +155.0 KB
Content
1657013108723-531.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.2 KB
Content
1657014479765-850.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +169.5 KB
Content
1657014671459-433.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.2 KB
Content
1657014949846-507.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +169.0 KB
Content
1657069890320-513.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +63.2 KB
Content
1657069922599-794.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +58.2 KB
Content
1657070133275-283.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +221.0 KB
Content
1657071488240-907.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +60.0 KB
Content
image-20220705171041-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +40.7 KB
Content
image-20220705171836-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +157.9 KB
Content
image-20220705171919-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +24.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0