Wiki source code of LG01v2 -- LoRa Gateway User Manual

Version 28.1 by Kilight Cao on 2022/10/31 09:59

version	line-number	content
2.3	1	(% style="text-align:center" %)
6.1	2	[[image:image-20221028134937-1.jpeg\|\|height="466" width="466"]]
2.2	3
2.3	4	(((
4.1	5
1.2	6
4.1	7
2.3	8	)))
1.2	9
2.3	10	Table of Contents：
1.2	11
2.3	12	{{toc/}}
1.2	13
2.3	14	= 1. Introduction =
1.2	15
	16
2.3	17	== 1.1 What is LG01v2 ==
1.2	18
	19
7.1	20	(((
	21	(((
8.1	22	The LG01v2 is an (% style="color:green" %)open-source single channel LoRa Gateway(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)WiFi , Ethernet or Cellular Network(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
7.1	23	)))
1.2	24
7.1	25	(((
	26	LG01v2 supports (% style="color:green" %)remote management(%%). System Integrator can easy to remote monitor the gateway and maintain it.
	27	)))
1.2	28
	29
	30
7.1	31	== 1.2 Specifications ==
1.2	32
	33
7.1	34	(% style="color:#037691" %)Hardware System:
1.2	35
7.1	36	* CPU: Quad-core Cortex-A7 1.2Ghz
	37	* RAM: 512MB
	38	* eMMC: 4GB
1.2	39
7.1	40	(% style="color:#037691" %)Interface:
2.2	41
7.1	42	* 10M/100M RJ45 Ports x 1
	43	* WiFi 802.11 b/g/n
2.2	44
7.1	45	(% style="color:#037691" %)Operating Condition:
2.2	46
7.1	47	* Work Temperature: -20 ~~ 65°C
	48	* Storage Temperature: -20 ~~ 65°C
	49	* Power Input: 5V, 2A, DC
2.2	50
7.1	51	== 1.3 Features ==
2.3	52
	53
7.1	54	* Open Source Debian system
	55	* Managed by Web GUI, SSH via WAN or WiFi
	56	* Remote Management
	57	* Auto-provisioning for batch deployment and management
7.2	58	* LoRa Gateway
7.1	59	* Built-in (% style="color:#037691" %)//The Things Network//(%%) local LoRaWAN server
	60	* Built-in (% style="color:#037691" %)//Node-Red// (%%)local Application server
	61
	62	== 1.4 Block Diagram ==
	63
	64
	65
9.1	66	== 1.5 LED Indicators ==
7.1	67
	68
9.1	69	LG01-V2 has totally four LEDs, They are:
7.1	70
	71
9.1	72	(% style="color:blue" %)//➢ Power LED//(%%)//: This RED LED will be solid if the device is properly powered//
7.1	73
9.1	74	(% style="color:blue" %)//➢ ETH LED//(%%)//: This RGB LED will blink GREEN when the ETH port is connecting//
7.1	75
9.1	76	(% style="color:blue" %)//➢ SYS LED//(%%)//: This RGB LED will show different colors in different states~://
7.1	77
9.1	78	// ✓ SOLID GREEN: The device is alive with a LoRaWAN server connection.//
7.1	79
9.1	80	// ✓ BLINKING GREEN: a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
7.1	81
9.1	82	// ✓ SOLID RED: Device doesn't have an Internet connection.//
7.1	83
9.1	84	(% style="color:blue" %)//➢ WIFI LED//(%%)//: This LED shows the WIFI interface connection status.//
7.1	85
9.1	86
	87
	88	== 1.6 Button Intruction ==
	89
	90
	91	LG01-V2 has a black toggle button, which is:
	92
	93
	94	(% style="color:blue" %)//➢ //Long press 4-5s : (%%)the gateway will reload the Network and Initialize wifi configuration
	95
	96	// LED status: ETH LED will BLINKIND BULE Until the reload is finished.//
	97
	98
	99	(% style="color:blue" %)//➢ //Long press more than 10s:(%%) //the gateway will restore the factory settings.//
	100
	101	//LED status: ETH LED will SOLID BULE Until the restore is finished.//
	102
	103
	104
17.2	105	= 2. Quick Start =
9.1	106
	107
24.1	108	The LG01-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
9.1	109
24.1	110	In most cases, the first thing you need to do is make the LG01-v2 accessible to the network.
12.1	111
	112
17.2	113	== 2.1 Connects to the network and accesses the gateway Web UI ==
12.1	114
17.2	115
	116	== 2.1.1 connect the network. ==
	117
	118
	119	=== (% style="color:blue" %)Method 1(%%): Connect via Ethernet with DHCP IP from the router ===
	120
	121
24.1	122	Connect the LG01-V2 Ethernet port to your router and LG01-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01-V2.
17.2	123
	124	You can also use this IP to connect.
	125
24.1	126
19.1	127	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100129-1.png?width=1263&height=332&rev=1.1\|\|alt="image-20220622100129-1.png"]]
17.2	128
	129
24.1	130	=== (% style="color:blue" %)Method 2(%%): Connect via WiFi with DHCP IP from the router ===
17.2	131
	132
24.1	133	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100542-2.png?width=1256&height=369&rev=1.1\|\|alt="image-20220622100542-2.png"]]
17.2	134
24.1	135	The LG01-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
17.2	136
24.1	137
	138	(% style="color:#037691" %)Steps to connect via fallback IP:
	139
	140	~1. Connect PC's Ethernet port to LG01-V2's WAN port
	141
17.2	142	2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
	143
	144
24.1	145	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622101433-4.png?rev=1.1\|\|alt="image-20220622101433-4.png"]]
17.2	146
	147
24.1	148	and then On the PC, use the IP address http:~/~/172.31.255.254 to access the LG01-V2 via Web or Console.
17.2	149
	150
24.1	151	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102210-5.png?width=919&height=504&rev=1.1\|\|alt="image-20220622102210-5.png"]]
	152
	153
	154	Fill in the WiFi information by checking the box and clicking (% style="color:red" %)Save&Apply
	155
	156
	157	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102702-6.png?rev=1.1\|\|alt="image-20220622102702-6.png"]]
	158
	159
17.2	160	Wi-Fi configuration successful
	161
	162
24.1	163	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102847-7.png?rev=1.1\|\|alt="image-20220622102847-7.png"]]
17.2	164
24.1	165	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?width=938&height=476&rev=1.1\|\|alt="image-20220622102901-8.png"]]
17.2	166
	167
24.1	168	= 3. Web Configure Pages =
17.2	169
24.1	170	== 3.1 Home ==
	171
	172	//Shows the system running status~://
	173
	174	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1\|\|alt="image-20220622102901-8.png" height="476" width="939"]]
	175
	176
	177	== 3.2 Network Settings ==
	178
	179
	180	=== 3.2.1 Network ~-~-> WiFi ===
	181
	182
	183	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616114756-4.png?width=669&height=251&rev=1.1\|\|alt="image-20220616114756-4.png"]]
	184
	185
	186
	187	=== 3.4.2 Network ~-~-> System Status ===
	188
	189
	190	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820134112-2.png?width=668&height=539&rev=1.1\|\|alt="image-20220820134112-2.png"]]
	191
	192
	193
	194	=== 3.4.3 Network ~-~-> Firewall ===
	195
	196
	197	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616115351-6.png?width=661&height=244&rev=1.1\|\|alt="image-20220616115351-6.png"]]
	198
	199
	200
	201	== 3.5 System ==
	202
	203
	204	=== 3.5.1 System ~-~-> System Overview ===
	205
	206
	207	Shows the system info:
	208
	209	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220917144512-5.png?width=853&height=618&rev=1.1\|\|alt="image-20220917144512-5.png"]]
	210
	211
	212
	213	=== 3.5.2 System ~-~-> Backup/Restore ===
	214
	215
	216	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220917144725-6.png?width=869&height=208&rev=1.1\|\|alt="image-20220917144725-6.png"]]
	217
	218
	219
25.1	220	= 4. How to configure the LA66 module =
24.1	221
25.1	222
	223	== 4.1 Access the LA66 module ==
	224
	225
	226	Users can access the LA66 module by running the following command, then select the option ''serial port setup":
	227
	228	(% class="box infomessage" %)
	229	(((
	230	root@dragino-2406ef:~~# minicom -s
	231	)))
	232
	233	[[image:image-20221029174637-2.png\|\|height="410" width="524"]]
	234
	235
	236	And then, change the setting:
	237
	238	(% class="box infomessage" %)
	239	(((
	240	Serial Device : /dev/ttyUSB0
	241
	242	Bps/Par/Bits : 9600 8N1
	243	)))
	244
	245
	246	(% style="color:red" %)Note: Enter the corresponding letter to change the configuration, like A,B,C(%%)
	247	(% style="color:red" %)[[image:image-20221029174703-3.png]]
	248
	249
	250	Enter AT+CFG in the interface to get the configuration,
	251
	252	[[image:image-20221029172156-1.png\|\|height="315" width="358"]]
	253
	254
27.1	255	== 4.2 Example: LG01v2 Peer-to-Peer ==
25.1	256
27.1	257
25.1	258	(% style="color:red" %)LG01v2 as Receiver: (configured as AT+RXMOD=65535,2)
	259
	260	[[image:image-20221031091652-2.png]]
	261
	262
	263	(% style="color:red" %)Sender:
	264
	265
	266	[[image:image-20221031092053-4.png]]
	267
	268
	269	Instruction for LA66 Peer-to-Peer firmware :[[ Instruction >>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]
	270	)))
	271
	272
28.1	273	= 5. Build in Server =
25.1	274
	275
24.1	276	The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)Node-Red, and(%%) LoRaWAN Server: (% style="color:blue" %)The Things Network - Stack (Open Source 3.19 Version).
	277
	278
	279	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820115644-1.png?width=778&height=217&rev=1.1\|\|alt="image-20220820115644-1.png"]]
	280
	281
	282	(% style="color:red" %)Note:
	283
	284	Path: System ~-~-> Built-in Server
	285
	286
	287	Troubleshooting:
	288
	289
	290	~ 1. URL does not jump properly
	291
	292	For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
	293
	294	For the Node-Red, you can use the local IP address and the port is 1880 to access it.
	295
	296
	297
25.1	298	== 5.1 LoRaWAN Network Server ~-~- The Things Network - Stack (TTN-V3) ==
24.1	299
	300
	301	You can access the gateway's built-in LNS server of (% style="color:blue" %)The Things Network - Stack (%%)via the URL( (% style="background-color:yellow" %)__//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //__(%%)) in your browser.
	302
	303	Such as (% style="background-color:yellow" %)__//http:~/~/dragino-54ff12:8080 or http:~/~/<Local-IPV4-Address>//__
	304
	305
	306	Login account:
	307
	308	User ID: (% style="background-color:yellow" %)admin(%%)
	309
	310	Password: (% style="background-color:yellow" %)dragino(%%)
	311
	312
	313	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725171719-1.png?width=769&height=570&rev=1.1\|\|alt="image-20220725171719-1.png"]]
	314
	315
	316
25.1	317	== 5.2 Application Server ~-~- Node-Red ==
24.1	318
	319
	320	You can access the gateway's built-in AS server of (% style="color:blue" %)Node-Red (%%)via the URL((% style="background-color:yellow" %)__//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//__(%%)) in your browser.
	321
	322
	323	Such as (% style="background-color:yellow" %)__//http:~/~/dragino-54ff12:1880 or http:~/~/<Local-IPV4-Address>//__
	324
	325
	326	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1\|\|alt="image-20220725172124-3.png"]]
	327
	328
26.1	329	= (% style="color:inherit; font-family:inherit; font-size:29px" %)6. How users can access LG01v2 using serial USB(%%) =
24.1	330
	331
	332	(% style="color:blue" %)USB TTL to LG01v2 Connection:
	333
	334
	335	Port 1 of the UART on the LG01v2 is GND
	336
	337	(% class="box infomessage" %)
	338	(((
	339	TXD <~-~--> UART RXD (Gray line)
	340
	341	RXD <~-~--> UART TXD (White line)
	342
	343	GND <~-~--> GND (Black line)
	344	)))
	345
	346
	347	LG01v2 UART connection photo
	348
	349	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1\|\|alt="image-20220804163015-1.png"]]
	350
	351
	352
	353	In the PC, you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)115200(%%) to access the serial console for LG01v2. LG01v2 will output system info once power on as below:
	354
	355
	356	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1\|\|alt="image-20220804164928-3.png"]]
	357
	358	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1\|\|alt="image-20220804164747-2.png"]]
	359
12.1	360
17.2	361	= 7. Trouble Shooting =
	362
	363
	364	== 7.1 I can't log in to the built-in Server TTN Stack which shows 'Login failed'. ==
	365
	366
	367
	368
	369	This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
	370
	371	By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
	372
	373
	374	So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
	375
	376	Click the update URL button to configure the URL with the current eth port address.
	377
	378
	379
	380
	381
	382	= (% style="color:inherit; font-family:inherit; font-size:29px" %)8. Supports(%%) =
	383
	384
	385	(((
	386	//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//
	387	)))
	388
	389	(((
	390	//With your question as detailed as possible. We will reply and help you in the shortest.//
	391
	392
	393
	394	= 9. Reference =
	395
	396
	397	* Install Tago Core: Refer Install Tago Core in LPS8v2 in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
	398	* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
	399
	400
	401	)))
	402
	403	= 10. Order Info =
	404
	405
	406	(% style="color:#0000ff" %)LPS8v2-XXX-YYY
	407
	408	(% style="color:#0000ff" %)XXX(% style="color:black" %): Frequency Band
	409
	410	* (% style="color:red" %)AS923(%%): LoRaWAN AS923 band
	411	* (% style="color:red" %)AU915(%%): LoRaWAN AU915 band
	412	* (% style="color:red" %)EU868(%%): LoRaWAN EU868 band
	413	* (% style="color:red" %)KR920(%%): LoRaWAN KR920 band
	414	* (% style="color:red" %)US915(%%): LoRaWAN US915 band
	415	* (% style="color:red" %)IN865(%%): LoRaWAN IN865 band
	416
	417	(% style="color:#0000ff" %)YYY(% style="color:black" %): 4G Cellular Option
	418
	419	* (% style="color:red" %)E(%%): EMEA, Korea, Thailand, India.
	420	* (% style="color:red" %)A(%%): North America/ Rogers/AT&T/T-Mobile.
	421	* (% style="color:red" %)AU(%%): Latin America, New Zeland, Taiwan
	422	* (% style="color:red" %)J(%%): Japan, DOCOMO/SoftBank/ KDDI
	423
	424	More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
	425
	426
	427
	428	= 10. Manufacturer Info =
	429
	430
	431	Shenzhen Dragino Technology Development co. LTD
	432
	433	Room 202, Block B, BCT Incubation Bases (BaoChengTai), No.8 CaiYunRoad
	434
	435	LongCheng Street, LongGang District ; Shenzhen 518116,China
	436
	437
	438
	439	= 11. FCC Warning =
	440
	441
	442	(((
	443	This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
	444	)))
	445
	446	(((
	447	~-~- Reorient or relocate the receiving antenna.
	448	)))
	449
	450	(((
	451	~-~- Increase the separation between the equipment and receiver.
	452	)))
	453
	454	(((
	455	~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
	456	)))
	457
	458	(((
	459	~-~- Consult the dealer or an experienced radio/TV technician for help.
	460	)))
	461
	462
	463	(((
	464	Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
	465	)))
	466
	467
	468	(((
	469	The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
	470
	471
	472	)))
	473
	474	~)~)~)

Wiki source code of LG01v2 -- LoRa Gateway User Manual

Applications

Navigation