Skip to Content
Version 26.1 by Kilight Cao on 2022/10/31 09:54
Hide last authors
Kilight Cao 2.3 1 (% style="text-align:center" %)
Kilight Cao 6.1 2 [[image:image-20221028134937-1.jpeg||height="466" width="466"]]
Kilight Cao 2.2 3
Kilight Cao 2.3 4 (((
Kilight Cao 4.1 5
Xiaoling 1.2 6
Kilight Cao 4.1 7
Kilight Cao 2.3 8 )))
Xiaoling 1.2 9
Kilight Cao 2.3 10 **Table of Contents：**
Xiaoling 1.2 11
Kilight Cao 2.3 12 {{toc/}}
Xiaoling 1.2 13
Kilight Cao 2.3 14 = **1. Introduction** =
Xiaoling 1.2 15
16
Kilight Cao 2.3 17 == **1.1 What is LG01v2** ==
Xiaoling 1.2 18
19
Kilight Cao 7.1 20 (((
21 (((
Kilight Cao 8.1 22 The LG01v2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
Kilight Cao 7.1 23 )))
Xiaoling 1.2 24
Kilight Cao 7.1 25 (((
26 LG01v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
27 )))
Xiaoling 1.2 28
29
30
Kilight Cao 7.1 31 == **1.2 Specifications** ==
Xiaoling 1.2 32
33
Kilight Cao 7.1 34 (% style="color:#037691" %)**Hardware System:**
Xiaoling 1.2 35
Kilight Cao 7.1 36 * CPU: Quad-core Cortex-A7 1.2Ghz
37 * RAM: 512MB
38 * eMMC: 4GB
Xiaoling 1.2 39
Kilight Cao 7.1 40 (% style="color:#037691" %)**Interface:**
Kilight Cao 2.2 41
Kilight Cao 7.1 42 * 10M/100M RJ45 Ports x 1
43 * WiFi 802.11 b/g/n
Kilight Cao 2.2 44
Kilight Cao 7.1 45 (% style="color:#037691" %)**Operating Condition:**
Kilight Cao 2.2 46
Kilight Cao 7.1 47 * Work Temperature: -20 ~~ 65°C
48 * Storage Temperature: -20 ~~ 65°C
49 * Power Input: 5V, 2A, DC
Kilight Cao 2.2 50
Kilight Cao 7.1 51 == **1.3 Features** ==
Kilight Cao 2.3 52
53
Kilight Cao 7.1 54 * Open Source Debian system
55 * Managed by Web GUI, SSH via WAN or WiFi
56 * Remote Management
57 * Auto-provisioning for batch deployment and management
Kilight Cao 7.2 58 * LoRa Gateway
Kilight Cao 7.1 59 * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
60 * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
61
62 == **1.4 Block Diagram** ==
63
64
65
Kilight Cao 9.1 66 == **1.5 LED Indicators** ==
Kilight Cao 7.1 67
68
Kilight Cao 9.1 69 LG01-V2 has totally four LEDs, They are:
Kilight Cao 7.1 70
71
Kilight Cao 9.1 72 (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
Kilight Cao 7.1 73
Kilight Cao 9.1 74 (% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
Kilight Cao 7.1 75
Kilight Cao 9.1 76 (% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
Kilight Cao 7.1 77
Kilight Cao 9.1 78 // ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
Kilight Cao 7.1 79
Kilight Cao 9.1 80 // ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
Kilight Cao 7.1 81
Kilight Cao 9.1 82 // ✓** SOLID RED:** Device doesn't have an Internet connection.//
Kilight Cao 7.1 83
Kilight Cao 9.1 84 (% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
Kilight Cao 7.1 85
Kilight Cao 9.1 86
87
88 == **1.6 Button Intruction** ==
89
90
91 LG01-V2 has a black toggle button, which is:
92
93
94 (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
95
96 // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
97
98
99 (% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
100
101 //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
102
103
104
Kilight Cao 17.2 105 = ** 2. Quick Start** =
Kilight Cao 9.1 106
107
Kilight Cao 24.1 108 The LG01-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
Kilight Cao 9.1 109
Kilight Cao 24.1 110 In most cases, the first thing you need to do is make the LG01-v2 accessible to the network.
Kilight Cao 12.1 111
112
Kilight Cao 17.2 113 == **2.1 Connects to the network and accesses the gateway Web UI** ==
Kilight Cao 12.1 114
Kilight Cao 17.2 115
116 == **2.1.1 connect the network.** ==
117
118
119 === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
120
121
Kilight Cao 24.1 122 Connect the LG01-V2 Ethernet port to your router and LG01-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01-V2.
Kilight Cao 17.2 123
124 You can also use this IP to connect.
125
Kilight Cao 24.1 126
Kilight Cao 19.1 127 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100129-1.png?width=1263&height=332&rev=1.1||alt="image-20220622100129-1.png"]]
Kilight Cao 17.2 128
129
Kilight Cao 24.1 130 === (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
Kilight Cao 17.2 131
132
Kilight Cao 24.1 133 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100542-2.png?width=1256&height=369&rev=1.1||alt="image-20220622100542-2.png"]]
Kilight Cao 17.2 134
Kilight Cao 24.1 135 The LG01-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
Kilight Cao 17.2 136
Kilight Cao 24.1 137
138 (% style="color:#037691" %)**Steps to connect via fallback IP:**
139
140 ~1. Connect PC's Ethernet port to LG01-V2's WAN port
141
Kilight Cao 17.2 142 2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
143
144
Kilight Cao 24.1 145 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622101433-4.png?rev=1.1||alt="image-20220622101433-4.png"]]
Kilight Cao 17.2 146
147
Kilight Cao 24.1 148 and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LG01-V2 via Web or Console.
Kilight Cao 17.2 149
150
Kilight Cao 24.1 151 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102210-5.png?width=919&height=504&rev=1.1||alt="image-20220622102210-5.png"]]
152
153
154 Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
155
156
157 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102702-6.png?rev=1.1||alt="image-20220622102702-6.png"]]
158
159
Kilight Cao 17.2 160 **Wi-Fi configuration successful**
161
162
Kilight Cao 24.1 163 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102847-7.png?rev=1.1||alt="image-20220622102847-7.png"]]
Kilight Cao 17.2 164
Kilight Cao 24.1 165 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?width=938&height=476&rev=1.1||alt="image-20220622102901-8.png"]]
Kilight Cao 17.2 166
167
Kilight Cao 24.1 168 = **3. Web Configure Pages** =
Kilight Cao 17.2 169
Kilight Cao 24.1 170 == **3.1 Home** ==
171
172 //Shows the system running status~://
173
174 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
175
176
177 == **3.2 Network Settings** ==
178
179
180 === **3.2.1 Network ~-~-> WiFi** ===
181
182
183 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616114756-4.png?width=669&height=251&rev=1.1||alt="image-20220616114756-4.png"]]
184
185
186
187 === **3.4.2 Network ~-~-> System Status** ===
188
189
190 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820134112-2.png?width=668&height=539&rev=1.1||alt="image-20220820134112-2.png"]]
191
192
193
194 === **3.4.3 Network ~-~-> Firewall** ===
195
196
197 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616115351-6.png?width=661&height=244&rev=1.1||alt="image-20220616115351-6.png"]]
198
199
200
201 == **3.5 System** ==
202
203
204 === **3.5.1  System ~-~-> System Overview** ===
205
206
207 Shows the system info:
208
209 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220917144512-5.png?width=853&height=618&rev=1.1||alt="image-20220917144512-5.png"]]
210
211
212
213 === **3.5.2 System ~-~-> Backup/Restore** ===
214
215
216 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220917144725-6.png?width=869&height=208&rev=1.1||alt="image-20220917144725-6.png"]]
217
218
219
Kilight Cao 25.1 220 = **4. How to configure the LA66 module** =
Kilight Cao 24.1 221
Kilight Cao 25.1 222
223 == **4.1 Access the LA66 module** ==
224
225
226 Users can access the LA66 module by running the following command, then select the option **''serial port setup"**:
227
228 (% class="box infomessage" %)
229 (((
230 **root@dragino-2406ef:~~# minicom -s**
231 )))
232
233 [[image:image-20221029174637-2.png||height="410" width="524"]]
234
235
236 And then, change the setting:
237
238 (% class="box infomessage" %)
239 (((
240 **Serial Device :** **/dev/ttyUSB0**
241
242 **Bps/Par/Bits : 9600 8N1**
243 )))
244
245
246 (% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**(%%)
247 (% style="color:red" %)[[image:image-20221029174703-3.png]]
248
249
250 Enter **AT+CFG **in the interface to get the configuration,
251
252 [[image:image-20221029172156-1.png||height="315" width="358"]]
253
254
255 LG01v2 Peer-to-Peer example:
256
257 (% style="color:red" %)**LG01v2 as Receiver: (configured as AT+RXMOD=65535,2)**
258
259 [[image:image-20221031091652-2.png]]
260
261
262 (% style="color:red" %)**Sender:**
263
264
265 [[image:image-20221031092053-4.png]]
266
267
268 Instruction for LA66 Peer-to-Peer firmware :[[ **Instruction **>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]
269 )))
270
271
272 = (% id="cke_bm_262449S" style="display:none" %)** **(%%)**5. Build-in Server** =
273
274
Kilight Cao 24.1 275 The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
276
277
278 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820115644-1.png?width=778&height=217&rev=1.1||alt="image-20220820115644-1.png"]]
279
280
281 (% style="color:red" %)**Note:**
282
283 **Path**: System ~-~-> Built-in Server
284
285
286 **Troubleshooting:**
287
288
289 **~ 1. URL does not jump properly**
290
291 For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
292
293 For the Node-Red, you can use the local IP address and the port is 1880 to access it.
294
295
296
Kilight Cao 25.1 297 == **5.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
Kilight Cao 24.1 298
299
300 You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
301
302 Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
303
304
305 Login account:
306
307 **User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
308
309 **Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
310
311
312 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725171719-1.png?width=769&height=570&rev=1.1||alt="image-20220725171719-1.png"]]
313
314
315
Kilight Cao 25.1 316 == **5.2 Application Server ~-~- Node-Red** ==
Kilight Cao 24.1 317
318
319 You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
320
321
322 Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
323
324
325 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
326
327
Kilight Cao 26.1 328 = (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01v2 using serial USB**(%%) =
Kilight Cao 24.1 329
330
331 (% style="color:blue" %)**USB TTL to LG01v2  Connection:**
332
333
334 Port 1 of the UART on the LG01v2 is GND
335
336 (% class="box infomessage" %)
337 (((
338 **TXD  <~-~--> UART RXD (Gray line)**
339
340 **RXD  <~-~--> UART TXD (White line)**
341
342 **GND <~-~--> GND (Black line)**
343 )))
344
345
346 **LG01v2 UART connection photo**
347
348 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
349
350
351
352 In the PC, you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LG01v2. LG01v2 will output system info once power on as below:
353
354
355 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
356
357 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
358
Kilight Cao 12.1 359
Kilight Cao 17.2 360 = **7. Trouble Shooting** =
361
362
363 == 7.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
364
365
366
367
368 This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
369
370 By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
371
372
373 So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
374
375 **Click the update URL button to configure the URL with the current eth port address.**
376
377
378
379
380
381 = (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
382
383
384 (((
385 **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
386 )))
387
388 (((
389 **//With your question as detailed as possible. We will reply and help you in the shortest.//**
390
391
392
393 = **9. Reference** =
394
395
396 * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
397 * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
398
399
400 )))
401
402 = **10. Order Info** =
403
404
405 (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
406
407 (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
408
409 * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
410 * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
411 * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
412 * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
413 * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
414 * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
415
416 (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
417
418 * (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
419 * (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
420 * (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
421 * (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
422
423 More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
424
425
426
427 = **10. Manufacturer Info** =
428
429
430 **Shenzhen Dragino Technology Development co. LTD**
431
432 Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
433
434 LongCheng Street, LongGang District ; Shenzhen 518116,China
435
436
437
438 = **11. FCC Warning** =
439
440
441 (((
442 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
443 )))
444
445 (((
446 ~-~- Reorient or relocate the receiving antenna.
447 )))
448
449 (((
450 ~-~- Increase the separation between the equipment and receiver.
451 )))
452
453 (((
454 ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
455 )))
456
457 (((
458 ~-~- Consult the dealer or an experienced radio/TV technician for help.
459 )))
460
461
462 (((
463 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
464 )))
465
466
467 (((
468 The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
469
470
471 )))
472
473 ~)~)~)