Wiki source code of LG01v2 -- LoRa Gateway User Manual

Version 102.1 by Edwin Chen on 2022/11/14 19:41

version	line-number	content
2.3	1	(% style="text-align:center" %)
6.1	2	[[image:image-20221028134937-1.jpeg\|\|height="466" width="466"]]
2.2	3
2.3	4	(((
4.1	5
1.2	6
4.1	7
2.3	8	)))
1.2	9
2.3	10	Table of Contents：
1.2	11
2.3	12	{{toc/}}
1.2	13
2.3	14	= 1. Introduction =
1.2	15
	16
61.1	17	== 1.1 What is LG01-V2 ==
1.2	18
	19
7.1	20	(((
	21	(((
61.1	22	The LG01-V2 is an (% style="color:green" %)open-source single channel LoRa Gateway(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)WiFi , Ethernet or Cellular Network(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
7.1	23	)))
1.2	24
7.1	25	(((
61.1	26	LG01-V2 supports (% style="color:green" %)remote management(%%). System Integrator can easy to remote monitor the gateway and maintain it.
7.1	27	)))
1.2	28
	29
	30
7.1	31	== 1.2 Specifications ==
1.2	32
	33
7.1	34	(% style="color:#037691" %)Hardware System:
1.2	35
7.1	36	* CPU: Quad-core Cortex-A7 1.2Ghz
	37	* RAM: 512MB
	38	* eMMC: 4GB
1.2	39
7.1	40	(% style="color:#037691" %)Interface:
2.2	41
7.1	42	* 10M/100M RJ45 Ports x 1
	43	* WiFi 802.11 b/g/n
2.2	44
7.1	45	(% style="color:#037691" %)Operating Condition:
2.2	46
7.1	47	* Work Temperature: -20 ~~ 65°C
	48	* Storage Temperature: -20 ~~ 65°C
	49	* Power Input: 5V, 2A, DC
2.2	50
7.1	51	== 1.3 Features ==
2.3	52
	53
7.1	54	* Open Source Debian system
	55	* Managed by Web GUI, SSH via WAN or WiFi
	56	* Remote Management
	57	* Auto-provisioning for batch deployment and management
7.2	58	* LoRa Gateway
7.1	59	* Built-in (% style="color:#037691" %)//The Things Network//(%%) local LoRaWAN server
	60	* Built-in (% style="color:#037691" %)//Node-Red// (%%)local Application server
	61
	62	== 1.4 Block Diagram ==
	63
	64
	65
9.1	66	== 1.5 LED Indicators ==
7.1	67
	68
9.1	69	LG01-V2 has totally four LEDs, They are:
7.1	70
	71
9.1	72	(% style="color:blue" %)//➢ Power LED//(%%)//: This RED LED will be solid if the device is properly powered//
7.1	73
9.1	74	(% style="color:blue" %)//➢ ETH LED//(%%)//: This RGB LED will blink GREEN when the ETH port is connecting//
7.1	75
9.1	76	(% style="color:blue" %)//➢ SYS LED//(%%)//: This RGB LED will show different colors in different states~://
7.1	77
9.1	78	// ✓ SOLID GREEN: The device is alive with a LoRaWAN server connection.//
7.1	79
9.1	80	// ✓ BLINKING GREEN: a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
7.1	81
9.1	82	// ✓ SOLID RED: Device doesn't have an Internet connection.//
7.1	83
9.1	84	(% style="color:blue" %)//➢ WIFI LED//(%%)//: This LED shows the WIFI interface connection status.//
7.1	85
9.1	86
	87
	88	== 1.6 Button Intruction ==
	89
	90
61.1	91	LG01-V2 has a black toggle button, which is:
9.1	92
	93
	94	(% style="color:blue" %)//➢ //Long press 4-5s : (%%)the gateway will reload the Network and Initialize wifi configuration
	95
	96	// LED status: ETH LED will BLINKIND BULE Until the reload is finished.//
	97
	98
	99	(% style="color:blue" %)//➢ //Long press more than 10s:(%%) //the gateway will restore the factory settings.//
	100
	101	//LED status: ETH LED will SOLID BULE Until the restore is finished.//
	102
	103
	104
29.1	105	= 2. Quick Start =
9.1	106
	107
24.1	108	The LG01-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
9.1	109
24.1	110	In most cases, the first thing you need to do is make the LG01-v2 accessible to the network.
12.1	111
	112
17.2	113	== 2.1 Connects to the network and accesses the gateway Web UI ==
12.1	114
17.2	115
	116	== 2.1.1 connect the network. ==
	117
	118
	119	=== (% style="color:blue" %)Method 1(%%): Connect via Ethernet with DHCP IP from the router ===
	120
	121
61.1	122	Connect the LG01-V2 Ethernet port to your router and LG01-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01-V2.
17.2	123
	124	You can also use this IP to connect.
	125
24.1	126
19.1	127	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100129-1.png?width=1263&height=332&rev=1.1\|\|alt="image-20220622100129-1.png"]]
17.2	128
	129
24.1	130	=== (% style="color:blue" %)Method 2(%%): Connect via WiFi with DHCP IP from the router ===
17.2	131
	132
24.1	133	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100542-2.png?width=1256&height=369&rev=1.1\|\|alt="image-20220622100542-2.png"]]
17.2	134
	135
24.1	136	Fill in the WiFi information by checking the box and clicking (% style="color:red" %)Save&Apply
	137
	138
	139	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102702-6.png?rev=1.1\|\|alt="image-20220622102702-6.png"]]
	140
	141
17.2	142	Wi-Fi configuration successful
	143
	144
24.1	145	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102847-7.png?rev=1.1\|\|alt="image-20220622102847-7.png"]]
17.2	146
	147
	148
24.1	149	= 3. Web Configure Pages =
17.2	150
24.1	151	== 3.1 Home ==
	152
	153	//Shows the system running status~://
	154
73.1	155	[[image:image-20221104155612-1.png\|\|height="497" width="942"]]
24.1	156
	157
	158	== 3.2 Network Settings ==
	159
	160
	161	=== 3.2.1 Network ~-~-> WiFi ===
	162
	163
73.1	164	[[image:image-20221104155654-2.png\|\|height="319" width="813"]]
24.1	165
	166
	167
	168	=== 3.4.2 Network ~-~-> System Status ===
	169
	170
73.1	171	[[image:image-20221104155724-3.png\|\|height="679" width="861"]]
24.1	172
	173
	174
	175	=== 3.4.3 Network ~-~-> Firewall ===
	176
	177
	178	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616115351-6.png?width=661&height=244&rev=1.1\|\|alt="image-20220616115351-6.png"]]
	179
	180
	181
	182	== 3.5 System ==
	183
	184
	185	=== 3.5.1 System ~-~-> System Overview ===
	186
	187
	188	Shows the system info:
	189
73.1	190	[[image:image-20221104155907-4.png]]
24.1	191
	192
	193
	194	=== 3.5.2 System ~-~-> Backup/Restore ===
	195
	196
73.1	197	[[image:image-20221104155928-5.png\|\|height="334" width="880"]]
24.1	198
	199
66.1	200	= (% id="cke_bm_1978S" style="display:none" %) (%%)4. Build in Server =
24.1	201
	202
66.1	203	The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)Node-Red
25.1	204
	205
73.1	206	[[image:image-20221104155949-6.png\|\|height="315" width="1023"]]
25.1	207
66.1	208
	209	(% style="color:red" %)Note:
	210
	211	Path: System ~-~-> Built-in Server
	212
	213
	214	Troubleshooting:
	215
	216
	217	~ 1. URL does not jump properly
	218
	219	For the Node-Red, you can use the local IP address and the port is 1880 to access it.
	220
	221
	222
	223	== 4.1 Application Server ~-~- Node-Red ==
	224
	225
	226	You can access the gateway's built-in AS server of (% style="color:blue" %)Node-Red (%%)via the URL((% style="background-color:yellow" %)__//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//__(%%)) in your browser.
	227
	228
	229	Such as (% style="background-color:yellow" %)__//http:~/~/dragino-54ff12:1880 or http:~/~/<Local-IPV4-Address>//__
	230
	231
	232	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1\|\|alt="image-20220725172124-3.png"]]
	233
	234
	235	= 5. How to configure the Lora Gateway =
	236
	237
102.1	238	== 5.1 Configure and Debug LoRa wireless of LG01v2 ==
66.1	239
	240
61.1	241	Users can access the Lora configuration page by running the following command, then select the option ''serial port setup":
25.1	242
	243	(% class="box infomessage" %)
	244	(((
	245	root@dragino-2406ef:~~# minicom -s
	246	)))
	247
	248	[[image:image-20221029174637-2.png\|\|height="410" width="524"]]
	249
	250
	251	And then, change the setting:
	252
	253	(% class="box infomessage" %)
	254	(((
	255	Serial Device : /dev/ttyUSB0
	256
	257	Bps/Par/Bits : 9600 8N1
	258	)))
	259
	260
	261	(% style="color:red" %)Note: Enter the corresponding letter to change the configuration, like A,B,C(%%)
	262	(% style="color:red" %)[[image:image-20221029174703-3.png]]
	263
	264
	265	Enter AT+CFG in the interface to get the configuration,
	266
	267
41.1	268	(% class="box infomessage" %)
	269	(((
	270	AT+FRE=868.100,868.100 ~-~--> TX and RX frequency
	271	AT+GROUPMOD=0,0 ~-~--> TX and RX group
	272	AT+BW=0,0 ~-~--> TX and RX Bandwidth
	273	AT+SF=12,12 ~-~--> TX and RX Spreading Factor
	274	AT+POWER=14 ~-~--> TX Power Range
	275	AT+CRC=1,1 ~-~--> TX and RX CRC Type
	276	AT+HEADER=0,0 ~-~--> TX and RX Header Type
	277	AT+CR=1,1 ~-~--> TX and RX Coding Rate
	278	AT+IQ=0,0 ~-~--> TX and RX InvertIQ
	279	AT+PREAMBLE=8,8 ~-~--> TX and RX Preamble Length
	280	AT+SYNCWORD=0 ~-~--> Syncword(0: private，1: public)
	281	AT+RXMOD=65535,0 ~-~--> Rx Timeout and Reply mode
44.1	282	AT+RXDAFORM=1
41.1	283	)))
25.1	284
47.1	285
101.1	286	== 5.2 Example: LG01v2 ==
25.1	287
101.1	288	=== 5.2.1 Introduce for the example: ===
27.1	289
66.1	290	[[image:image-20221104102736-3.png\|\|height="282" width="723"]]
44.1	291
	292
101.1	293	In this example, there are two devices:
47.1	294
101.1	295	* LA66 Shield + UNO + DHT11: The UNO will get the temperature and humidity and broadcast the value via LoRa protocol.
	296	* LG01v2 : LG01v2 is set to listening the LoRa Channel which LA66 is broadcasting. When LG01v2 get the data from LA66, LG01v2 will plot the data in built-in IoT server.
47.1	297
101.1	298	=== 5.2.2 Set Up LA66 Shield + UNO ===
57.1	299
74.1	300
101.1	301	==== Set up LA66 Module ====
74.1	302
101.1	303	LA66 Module is loaded with the firmware [[LA66 Peer-to-Peer firmware>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]] and user can use AT Command to set up LA66 with below parameters:
	304
74.1	305	(((
83.1	306	(% style="color:red" %)LA66 Shield as Sender:
25.1	307
83.1	308	(% class="box infomessage" %)
	309	(((
	310	LA66 Shield configuration:
25.1	311
83.1	312	AT+FRE=868.100,868.100 ~-~--> TX and RX frequency set: 868100000
	313	AT+BW=0,0 ~-~--> TX and RX Bandwidth set: 125kHz
	314	AT+SF=12,12 ~-~--> TX and RX Spreading Factor set: SF12
	315	AT+POWER=14 ~-~--> TX Power Range set: 14dBm
	316	AT+CRC=1,1 ~-~--> TX and RX CRC Type
	317	AT+HEADER=0,0 ~-~--> TX and RX Header Type
	318	AT+CR=1,1 ~-~--> TX and RX Coding Rate
	319	AT+IQ=0,0 ~-~--> TX and RX InvertIQ
	320	AT+PREAMBLE=8,8 ~-~--> TX and RX Preamble Length set: 8
	321	AT+SYNCWORD=0 ~-~--> Syncword(0: private，1: public)
	322	AT+RXMOD=6,0 ~-~--> Rx Timeout and Reply mode
	323	)))
	324	)))
25.1	325
	326
101.1	327	==== Set up Arduino UNO ====
83.1	328
101.1	329	(% id="cke_bm_1033249S" style="display:none" %) (%%)Hardware Connection
83.1	330
	331	(% class="box infomessage" %)
	332	(((
	333	The DHT11 sensor connects to the LA66 Shield:
	334
	335	VCC <~-~--> 3.3V (Red line)
	336	DATA <~-~--> PIN8 (Purple line)
	337	GND <~-~--> GND (White line)
25.1	338	)))
	339
83.1	340	[[image:image-20221108170731-5.png\|\|height="588" width="441"]]
25.1	341
	342
101.1	343	===== 1. Open Arduino IDE =====
25.1	344
83.1	345	[[image:image-20221108172149-6.png\|\|height="650" width="542"]]
24.1	346
	347
101.1	348	===== 2. Open project =====
24.1	349
83.1	350	Users can download Arduino files from this link: [[attach:Log-Temperature-Sensor-and-send-data-to-Node-red.ino\|\|target="_blank"]]
	351
90.1	352	Then click Compile and Upload to LA66 Shield,
83.1	353
	354	[[image:image-20221108172432-7.png]]
	355
	356
101.1	357	===== 3. Open the Serial Monitor to check the LA66 Shield data =====
83.1	358
101.1	359	The UNO will now reads the temperature and humidity data from the sensor and broadcast it via LoRa wireless,
90.1	360
89.1	361	[[image:image-20221108174840-8.png\|\|height="731" width="671"]]
83.1	362
101.1	363
	364	Sending out data as below.
	365
89.1	366	[[image:image-20221108175113-9.png\|\|height="556" width="998"]]
83.1	367
	368
89.1	369
101.1	370	=== 5.2.3 Set Up LG01v2 ===
90.1	371
89.1	372
101.1	373	Configure LG01v2 LoRa channel parameters so it can get data from LA66 Shield
	374
	375	(% style="color:red; font-weight:bold" %)LG01v(% style="color:red" %)2 as Receiver: (configured as AT+RXMOD=65535,2)
	376
	377	(% class="box infomessage" %)
	378	(((
	379	LG01-V2 configuration:
	380
	381	AT+FRE=868.100,868.100 ~-~--> TX and RX frequency set: 868100000
	382	AT+BW=0,0 ~-~--> TX and RX Bandwidth set: 125kHz
	383	AT+SF=12,12 ~-~--> TX and RX Spreading Factor set: SF12
	384	AT+POWER=14 ~-~--> TX Power Range set: 14dBm
	385	AT+CRC=1,1 ~-~--> TX and RX CRC Type
	386	AT+HEADER=0,0 ~-~--> TX and RX Header Type
	387	AT+CR=1,1 ~-~--> TX and RX Coding Rate
	388	AT+IQ=0,0 ~-~--> TX and RX InvertIQ
	389	AT+PREAMBLE=8,8 ~-~--> TX and RX Preamble Length set: 8
	390	AT+SYNCWORD=0 ~-~--> Syncword(0: private，1: public)
	391	AT+RXMOD=65535,0 ~-~--> Rx Timeout and Reply mode, RX window always open
	392	)))
	393
	394
	395	=== 5.2.4 Test result ===
	396
	397	After the above configuration is complete, users can send test simulation data to check whether the configuration is correct, In LA66 sheild serial console send:(% style="color:red" %)(AT+SEND=1,hello world,2,3).
	398	)))
	399
	400	When LG01v2 replies with ACK when it receives a packet sent by LA66 sheild.
	401
	402	[[image:image-20221108164413-2.png]]
	403
	404
	405	In the real-time log of LG01v2：
	406
	407	[[image:image-20221108170314-3.png]]
	408
	409
	410	=== 5.2.5 Plot data chart in LG01v2 ===
	411
	412
	413	User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
	414
	415	User can import this example in Node-Red: [[attach:Log-Temperature-Sensor-and-send-data-to-node-red.json\|\|target="_blank"]]
	416
89.1	417	[[image:image-20221108180334-10.png\|\|height="651" width="1141"]]
	418
	419
	420	The temperature and humidity chart is displayed in the built-in node-red UI
	421
90.1	422	Browser input: (% style="background-color:yellow" %)__//http:~/~/<local-IPV4-address>//__(%%)
89.1	423
	424	[[image:image-20221108180458-11.png\|\|height="402" width="1137"]]
	425
	426
101.1	427	= (% style="color:inherit; font-family:inherit; font-size:29px" %)6. How users can access LG01(%%)v(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%) =
83.1	428
	429
61.1	430	(% style="color:blue" %)USB TTL to LG01-V2 Connection:
24.1	431
	432
61.1	433	Port 1 of the UART on the LG01-V2 is GND
24.1	434
	435	(% class="box infomessage" %)
	436	(((
	437	TXD <~-~--> UART RXD (Gray line)
	438
	439	RXD <~-~--> UART TXD (White line)
	440
	441	GND <~-~--> GND (Black line)
	442	)))
	443
	444
61.1	445	LG01-V2 UART connection photo
24.1	446
	447	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1\|\|alt="image-20220804163015-1.png"]]
	448
	449
	450
	451	In the PC, you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)115200(%%) to access the serial console for LG01v2. LG01v2 will output system info once power on as below:
	452
	453
	454	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1\|\|alt="image-20220804164928-3.png"]]
	455
	456	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1\|\|alt="image-20220804164747-2.png"]]
	457
12.1	458
29.1	459	= 7. FAQ =
17.2	460
	461
61.1	462	== 7.1 How does LG01-V2 communicate with Lora shield (LoRa.h) ==
17.2	463
	464
100.1	465	This example describes how to use LG01-V2, LoRa Shield to set up a LoRa network,
57.1	466
61.1	467	[[image:image-20221103152238-8.png\|\|height="251" width="654"]]
57.1	468
	469
61.1	470	(% style="color:red" %)Prerequisites: The configurations of LG01-V2 and Lora shield must match
38.1	471
61.1	472	LG01-V2 configuration:
38.1	473
48.1	474	(% class="box infomessage" %)
	475	(((
58.1	476	AT+FRE=868.100,868.100 ~-~--> TX and RX frequency set: 868100000
	477	AT+BW=0,0 ~-~--> TX and RX Bandwidth set: 125kHz
	478	AT+SF=12,12 ~-~--> TX and RX Spreading Factor set: SF12
48.1	479	AT+POWER=14 ~-~--> TX Power Range
	480	AT+CRC=1,1 ~-~--> TX and RX CRC Type
	481	AT+HEADER=0,0 ~-~--> TX and RX Header Type
	482	AT+CR=1,1 ~-~--> TX and RX Coding Rate
	483	AT+IQ=0,0 ~-~--> TX and RX InvertIQ
58.1	484	AT+PREAMBLE=8,8 ~-~--> TX and RX Preamble Length set: 8
	485	AT+SYNCWORD=0 ~-~--> Syncword(0: private，1: public), the corresponding Lora shield syncword is 0x12
	486	AT+RXMOD=65535,0 ~-~--> Rx Timeout and Reply mode,RX window always open
48.1	487	AT+RXDAFORM=1
	488	)))
38.1	489
	490	Lora shield configuration:
	491
	492	Lora Shield example: [[attach:LoRa_Shield_Sketch_For_MQTT.ino\|\|target="_blank"]] , [[attach:arduino-LoRa-master.zip\|\|target="_blank"]]
	493
	494	[[image:image-20221101161318-2.png]]
	495
	496
61.1	497	Test LG01-V2 to receive Lora Shield data:
38.1	498
	499	[[image:image-20221101161951-3.png]]
	500
	501
83.1	502	Test the LG01-V2 to send data:
38.1	503
	504	[[image:image-20221101162527-4.png]]
	505
	506
100.1	507	== 7.2 How does LG01-V2 communicate with Heltec LoRa Node ==
	508
	509
	510	This example describes how to use LG01-V2 and Heltec LoRa Node to set up a LoRa network,
	511
	512	[[image:image-20221112161111-2.png\|\|height="258" width="692"]]
	513
	514	(% style="color:red" %)Prerequisites: The configurations of LG01-V2 and Lora shield must match
	515
	516	LG01-V2 configuration:
	517
	518	(% class="box infomessage" %)
	519	(((
	520	AT+FRE=868.100,868.100 ~-~--> TX and RX frequency set: 868100000
	521	AT+BW=0,0 ~-~--> TX and RX Bandwidth set: 125kHz
	522	AT+SF=12,12 ~-~--> TX and RX Spreading Factor set: SF12
	523	AT+POWER=14 ~-~--> TX Power Range
	524	AT+CRC=1,1 ~-~--> TX and RX CRC Type
	525	AT+HEADER=0,0 ~-~--> TX and RX Header Type
	526	AT+CR=1,1 ~-~--> TX and RX Coding Rate
	527	AT+IQ=0,0 ~-~--> TX and RX InvertIQ
	528	AT+PREAMBLE=8,8 ~-~--> TX and RX Preamble Length set: 8
	529	AT+SYNCWORD=0 ~-~--> Syncword(0: private，1: public), the corresponding Lora shield syncword is 0x12
	530	AT+RXMOD=65535,0 ~-~--> Rx Timeout and Reply mode,RX window always open
	531	AT+RXDAFORM=1 ~-~--> RX data format（0: Hex ,1: String）
	532	)))
	533
	534	After we upload the sketch to Heltec LoRa Node, we can see below output from Arduino.
	535
	536	Lora Shield example: [[attach:LoRa_send_trial.ino\|\|target="_blank"]]
	537
	538	[[image:image-20221112162733-3.png\|\|height="524" width="927"]]
	539
	540
	541	And we can see the logread of gateway as below, means the packet arrive gateway:
	542
	543	[[image:image-20221112163119-4.png\|\|height="808" width="560"]]
	544
17.2	545	= (% style="color:inherit; font-family:inherit; font-size:29px" %)8. Supports(%%) =
	546
	547
	548	(((
	549	//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//
	550	)))
	551
	552	(((
	553	//With your question as detailed as possible. We will reply and help you in the shortest.//
	554
	555
	556
	557	= 9. Reference =
	558
	559
	560	* Install Tago Core: Refer Install Tago Core in LPS8v2 in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
	561	* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
	562
	563
	564	)))
	565
	566	= 10. Order Info =
	567
	568
	569	(% style="color:#0000ff" %)LPS8v2-XXX-YYY
	570
	571	(% style="color:#0000ff" %)XXX(% style="color:black" %): Frequency Band
	572
	573	* (% style="color:red" %)AS923(%%): LoRaWAN AS923 band
	574	* (% style="color:red" %)AU915(%%): LoRaWAN AU915 band
	575	* (% style="color:red" %)EU868(%%): LoRaWAN EU868 band
	576	* (% style="color:red" %)KR920(%%): LoRaWAN KR920 band
	577	* (% style="color:red" %)US915(%%): LoRaWAN US915 band
	578	* (% style="color:red" %)IN865(%%): LoRaWAN IN865 band
	579
	580	(% style="color:#0000ff" %)YYY(% style="color:black" %): 4G Cellular Option
	581
	582	* (% style="color:red" %)E(%%): EMEA, Korea, Thailand, India.
	583	* (% style="color:red" %)A(%%): North America/ Rogers/AT&T/T-Mobile.
	584	* (% style="color:red" %)AU(%%): Latin America, New Zeland, Taiwan
	585	* (% style="color:red" %)J(%%): Japan, DOCOMO/SoftBank/ KDDI
	586
	587	More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
	588
	589
	590
	591	= 10. Manufacturer Info =
	592
	593
	594	Shenzhen Dragino Technology Development co. LTD
	595
	596	Room 202, Block B, BCT Incubation Bases (BaoChengTai), No.8 CaiYunRoad
	597
	598	LongCheng Street, LongGang District ; Shenzhen 518116,China
	599
	600
	601
	602	= 11. FCC Warning =
	603
	604
	605	(((
	606	This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
	607	)))
	608
	609	(((
	610	~-~- Reorient or relocate the receiving antenna.
	611	)))
	612
	613	(((
	614	~-~- Increase the separation between the equipment and receiver.
	615	)))
	616
	617	(((
	618	~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
	619	)))
	620
	621	(((
	622	~-~- Consult the dealer or an experienced radio/TV technician for help.
	623	)))
	624
	625
	626	(((
	627	Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
	628	)))
	629
	630
	631	(((
	632	The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
	633
	634
	635	)))
	636
	637	~)~)~)

Wiki source code of LG01v2 -- LoRa Gateway User Manual

Applications

Navigation