Last modified by Kilight Cao on 2024/10/12 08:58
<
From version < 89.1 >
edited by Kilight Cao
on 2022/11/08 18:06
To version < 108.1 >
edited by Kilight Cao
on 2022/12/28 11:00
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -11,23 +11,30 @@
11 11  
12 12  {{toc/}}
13 13  
14 -= **1. Introduction** =
15 15  
16 16  
17 -== **1.1 What is LG01-V2** ==
18 18  
19 19  
18 +
19 += **1. Introduction** =
20 +
21 +== **1.1 What is LG01v2** ==
22 +
23 +
20 20  (((
21 21  (((
22 -The LG01-V2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LG01v2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 +
28 +LG01v2 is specially design for (% style="color:green" %)**peer to peer LoRa**(%%) protocol instead of LoRaWAN protocol. The LG01v2 use single channel LoRa module to minimize the deployment cost for a private p2p LoRa wireless network.
23 23  )))
24 24  
25 25  (((
26 -LG01-V2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
32 +LG01v2 uses Open Source Linux system. User can modify the Linux part and develop customize software base on it. It has (% style="color:green" %)**1.2Ghz Quad-Core CPU**(%%) , (% style="color:green" %)**4GB eMMC storage**(%%) and (% style="color:green" %)**512MB RAM**(%%) for most application.
33 +
34 +LG01v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
27 27  )))
28 28  
29 29  
30 -
31 31  == **1.2 Specifications** ==
32 32  
33 33  
... ... @@ -56,7 +56,6 @@
56 56  * Remote Management
57 57  * Auto-provisioning for batch deployment and management
58 58  * LoRa Gateway
59 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
60 60  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
61 61  
62 62  == **1.4 Block Diagram** ==
... ... @@ -84,7 +84,6 @@
84 84  (% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
85 85  
86 86  
87 -
88 88  == **1.6 Button Intruction** ==
89 89  
90 90  
... ... @@ -101,7 +101,6 @@
101 101   //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
102 102  
103 103  
104 -
105 105  = **2. Quick Start** =
106 106  
107 107  
... ... @@ -112,7 +112,6 @@
112 112  
113 113  == **2.1 Connects to the network and accesses the gateway Web UI** ==
114 114  
115 -
116 116  == **2.1.1 connect the network.** ==
117 117  
118 118  
... ... @@ -145,11 +145,11 @@
145 145  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102847-7.png?rev=1.1||alt="image-20220622102847-7.png"]]
146 146  
147 147  
148 -
149 149  = **3. Web Configure Pages** =
150 150  
151 151  == **3.1 Home** ==
152 152  
155 +
153 153  //Shows the system running status~://
154 154  
155 155  [[image:image-20221104155612-1.png||height="497" width="942"]]
... ... @@ -157,7 +157,6 @@
157 157  
158 158  == **3.2 Network Settings** ==
159 159  
160 -
161 161  === **3.2.1 Network ~-~-> WiFi** ===
162 162  
163 163  
... ... @@ -164,7 +164,6 @@
164 164  [[image:image-20221104155654-2.png||height="319" width="813"]]
165 165  
166 166  
167 -
168 168  === **3.4.2 Network ~-~-> System Status** ===
169 169  
170 170  
... ... @@ -171,7 +171,6 @@
171 171  [[image:image-20221104155724-3.png||height="679" width="861"]]
172 172  
173 173  
174 -
175 175  === **3.4.3 Network ~-~-> Firewall** ===
176 176  
177 177  
... ... @@ -178,10 +178,8 @@
178 178  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616115351-6.png?width=661&height=244&rev=1.1||alt="image-20220616115351-6.png"]]
179 179  
180 180  
181 -
182 182  == **3.5 System** ==
183 183  
184 -
185 185  === **3.5.1  System ~-~-> System Overview** ===
186 186  
187 187  
... ... @@ -190,7 +190,6 @@
190 190  [[image:image-20221104155907-4.png]]
191 191  
192 192  
193 -
194 194  === **3.5.2 System ~-~-> Backup/Restore** ===
195 195  
196 196  
... ... @@ -211,15 +211,13 @@
211 211   **Path**: System ~-~-> Built-in Server
212 212  
213 213  
214 -**Troubleshooting:**
211 +(% style="color:blue" %)**Troubleshooting：**
215 215  
216 -
217 217  **~ 1. URL does not jump properly**
218 218  
219 219   For the Node-Red, you can use the local IP address and the port is 1880 to access it.
220 220  
221 221  
222 -
223 223  == **4.1 Application Server ~-~- Node-Red** ==
224 224  
225 225  
... ... @@ -234,10 +234,9 @@
234 234  
235 235  = **5. How to configure the Lora Gateway** =
236 236  
232 +== **5.1 Configure and Debug LoRa wireless of LG01v2** ==
237 237  
238 -== **5.1 Access the Lora configuration page** ==
239 239  
240 -
241 241  Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**:
242 242  
243 243  (% class="box infomessage" %)
... ... @@ -258,7 +258,9 @@
258 258  )))
259 259  
260 260  
261 -(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**(%%)
255 +(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**
256 +
257 +
262 262  (% style="color:red" %)[[image:image-20221029174703-3.png]]
263 263  
264 264  
... ... @@ -267,56 +267,44 @@
267 267  
268 268  (% class="box infomessage" %)
269 269  (((
270 -AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
271 -AT+GROUPMOD=0,0  ~-~--> TX and RX group
272 -AT+BW=0,0  ~-~--> TX and RX Bandwidth
273 -AT+SF=12,12  ~-~--> TX and RX Spreading Factor
274 -AT+POWER=14  ~-~--> TX Power Range
275 -AT+CRC=1,1  ~-~--> TX and RX CRC Type
276 -AT+HEADER=0,0  ~-~--> TX and RX Header Type
277 -AT+CR=1,1  ~-~--> TX and RX Coding Rate
278 -AT+IQ=0,0  ~-~--> TX and RX InvertIQ
279 -AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length
280 -AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
281 -AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
282 -AT+RXDAFORM=1                              
266 +**AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
267 +AT+GROUPMOD=0,0  ~-~-->  TX and RX group
268 +AT+BW=0,0  ~-~-->  TX and RX Bandwidth
269 +AT+SF=12,12  ~-~-->  TX and RX Spreading Factor
270 +AT+POWER=14  ~-~-->  TX Power Range
271 +AT+CRC=1,1  ~-~-->  TX and RX CRC Type
272 +AT+HEADER=0,0  ~-~-->  TX and RX Header Type
273 +AT+CR=1,1  ~-~-->  TX and RX Coding Rate
274 +AT+IQ=0,0  ~-~-->  TX and RX InvertIQ
275 +AT+PREAMBLE=8,8  ~-~-->  TX and RX Preamble Length
276 +AT+SYNCWORD=0  ~-~-->  Syncword(0: private，1: public)
277 +AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
278 +AT+RXDAFORM=1**                              
283 283  )))
284 284  
285 285  
286 -== **5.2 Example: LG01**-**V2 Peer-to-Peer** ==
282 +== **5.2 Example: LG01v2** ==
287 287  
284 +=== **5.2.1 Introduce for the example:** ===
288 288  
286 +
289 289  [[image:image-20221104102736-3.png||height="282" width="723"]]
290 290  
291 291  
292 -The user can run the AT command to set the LG01-V2 RX window always open as a Receiver, The LG01-V2 can display the received data in the built-in server Node-Red, Here are the specific steps:
290 +In this example, there are two devices:
293 293  
294 -(% style="color:red" %)**Prerequisites: **(%%)The configuration of LG01-V2 and  LA66 Shield must match and the LA66 Shield firmware is **[[LA66 Peer-to-Peer firmware>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]**, users can use **AT+CFG** to check all configurations.
292 +* **LA66 Shield + UNO + DHT11**: The UNO will get the temperature and humidity and broadcast the value via LoRa protocol.
293 +* **LG01v2** : LG01v2 is set to listening the LoRa Channel which LA66 is broadcasting. When LG01v2 get the data from LA66, LG01v2 will plot the data in built-in IoT server.
295 295  
295 +=== **5.2.2 Set Up LA66 Shield + UNO** ===
296 296  
297 -=== **Log Temperature Sensor(DHT11) and send data to LG01v2, show it in Node-RED.** ===
298 298  
298 +==== **Set up LA66 Module** ====
299 299  
300 -(% style="color:red; font-weight:bold" %)**LG01-V**(% style="color:red" %)**2 as Receiver: (configured as AT+RXMOD=65535,2)**
301 301  
302 -(% class="box infomessage" %)
303 -(((
304 -**LG01-V2 configuration:**
301 +LA66 Module is loaded with the firmware **[[LA66 Peer-to-Peer firmware>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]] **and user can use AT Command to set up LA66 with below parameters:
305 305  
306 -AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
307 -AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
308 -AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
309 -AT+POWER=14  ~-~--> TX Power Range set: 14dBm
310 -AT+CRC=1,1  ~-~--> TX and RX CRC Type
311 -AT+HEADER=0,0  ~-~--> TX and RX Header Type
312 -AT+CR=1,1  ~-~--> TX and RX Coding Rate
313 -AT+IQ=0,0  ~-~--> TX and RX InvertIQ
314 -AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
315 -AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
316 -AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode, RX window always open
317 -)))
318 -
319 -
303 +(((
320 320  (% style="color:red" %)**LA66 Shield as Sender: **
321 321  
322 322  (% class="box infomessage" %)
... ... @@ -338,18 +338,11 @@
338 338  )))
339 339  
340 340  
341 -After the above configuration is complete, users can send test simulation data to check whether the configuration is correct, In LA66 sheild serial console send:(% style="color:red" %)**(AT+SEND=1,hello world,2,3).**
342 342  
343 -When LG01-V2 replies with ACK when it receives a packet sent by LA66 sheild.
326 +==== **Set up Arduino UNO** ====
344 344  
345 -[[image:image-20221108164413-2.png]]
328 +(% id="cke_bm_1033249S" style="display:none" %)** **
346 346  
347 -
348 -In the real-time log of LG01-V2：
349 -
350 -[[image:image-20221108170314-3.png]]
351 -
352 -
353 353  **Hardware Connection**
354 354  
355 355  (% class="box infomessage" %)
... ... @@ -364,50 +364,105 @@
364 364  [[image:image-20221108170731-5.png||height="588" width="441"]]
365 365  
366 366  
367 -**1.  open Arduino IDE**
368 368  
345 +===== **1. Open Arduino IDE** =====
346 +
347 +
369 369  [[image:image-20221108172149-6.png||height="650" width="542"]]
370 370  
371 371  
372 -**2.  Open project**
373 373  
352 +===== **2. Open project** =====
353 +
354 +
374 374  Users can download Arduino files from this link: [[attach:Log-Temperature-Sensor-and-send-data-to-Node-red.ino||target="_blank"]]
375 375  
376 -Then click Compile and Upload to LA66 Shield,
357 +Then click Compile and Upload to LA66 Shield,
377 377  
378 378  [[image:image-20221108172432-7.png]]
379 379  
380 380  
381 -**3. Open the Serial Monitor to check the LA66 Shield data**
382 382  
383 -The LA66 Shield reads the temperature and humidity data from the sensor and sends it to LG01V2,
363 +===== **3. Open the Serial Monitor to check the LA66 Shield data** =====
384 384  
365 +
366 +The UNO will now reads the temperature and humidity data from the sensor and broadcast it via LoRa wireless,
367 +
385 385  [[image:image-20221108174840-8.png||height="731" width="671"]]
386 386  
370 +
371 +
372 +Sending out data as below.
373 +
387 387  [[image:image-20221108175113-9.png||height="556" width="998"]]
388 388  
389 389  
390 -**4. Import the flow to the built-in server on LG01v2**
377 +=== **5.2.3 Set Up LG01v2** ===
391 391  
392 -Users can import this example in Node-Red: [[attach:Log-Temperature-Sensor-and-send-data-to-node-red.json||target="_blank"]]
393 393  
380 +Configure LG01v2 LoRa channel parameters so it can get data from LA66 Shield
381 +
382 +(% style="color:red; font-weight:bold" %)**LG01v**(% style="color:red" %)**2 as Receiver: (configured as AT+RXMOD=65535,2)**
383 +
384 +(% class="box infomessage" %)
385 +(((
386 +**LG01-V2 configuration:**
387 +
388 +AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
389 +AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
390 +AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
391 +AT+POWER=14  ~-~--> TX Power Range set: 14dBm
392 +AT+CRC=1,1  ~-~--> TX and RX CRC Type
393 +AT+HEADER=0,0  ~-~--> TX and RX Header Type
394 +AT+CR=1,1  ~-~--> TX and RX Coding Rate
395 +AT+IQ=0,0  ~-~--> TX and RX InvertIQ
396 +AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
397 +AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
398 +AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode, RX window always open
399 +)))
400 +
401 +
402 +=== **5.2.4 Test result** ===
403 +
404 +
405 +After the above configuration is complete, users can send test simulation data to check whether the configuration is correct, In LA66 sheild serial console send:(% style="color:red" %)**(AT+SEND=1,hello world,2,3).**
406 +)))
407 +
408 +When LG01v2 replies with ACK when it receives a packet sent by LA66 sheild.
409 +
410 +[[image:image-20221108164413-2.png]]
411 +
412 +
413 +
414 +In the real-time log of LG01v2：
415 +
416 +[[image:image-20221108170314-3.png]]
417 +
418 +
419 +=== **5.2.5 Plot data chart in LG01v2** ===
420 +
421 +
422 +User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
423 +
424 +User can import this example in Node-Red: [[attach:Log-Temperature-Sensor-and-send-data-to-node-red.json||target="_blank"]]
425 +
394 394  [[image:image-20221108180334-10.png||height="651" width="1141"]]
395 395  
396 396  
397 397  The temperature and humidity chart is displayed in the built-in node-red UI
398 398  
399 -**Browser input: **LG01-V2 IP address:1880/ui/
431 +**Browser input: (% style="background-color:yellow" %)__//http:~/~/<local-IPV4-address>//__(%%)**
400 400  
401 401  [[image:image-20221108180458-11.png||height="402" width="1137"]]
402 402  
403 403  
404 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**-V(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
436 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**v(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
405 405  
406 406  
407 -(% style="color:blue" %)**USB TTL to LG01-V2  Connection:**
439 +(% style="color:blue" %)**USB TTL to LG01v2  Connection:**
408 408  
409 409  
410 -Port 1 of the UART on the LG01-V2 is GND
442 +Port 1 of the UART on the LG01v2 is GND
411 411  
412 412  (% class="box infomessage" %)
413 413  (((
... ... @@ -419,7 +419,7 @@
419 419  )))
420 420  
421 421  
422 -**LG01-V2 UART connection photo**
454 +**LG01v2 UART connection photo**
423 423  
424 424  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
425 425  
... ... @@ -430,23 +430,29 @@
430 430  
431 431  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
432 432  
465 +
433 433  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
434 434  
435 435  
436 -= **7. FAQ** =
469 += **7. OTA System Update** =
437 437  
438 438  
439 -== **7.1 How does LG01-V2 communicate with Lora shield (LoRa.h)** ==
472 +LG01v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
440 440  
441 441  
442 -This example describes how to use LG01-V2, LoRa Shield to set up a LoRa network
475 += **8. FAQ** =
443 443  
477 +== **8.1 How does LG01v2 communicate with Lora shield (LoRa.h)** ==
478 +
479 +
480 +This example describes how to use LG01v2, LoRa Shield to set up a LoRa network,
481 +
444 444  [[image:image-20221103152238-8.png||height="251" width="654"]]
445 445  
446 446  
447 -(% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
485 +(% style="color:red" %)**Prerequisites: The configurations of LG01v2 and Lora shield must match**
448 448  
449 -**LG01-V2 configuration:**
487 +**LG01v2 configuration:**
450 450  
451 451  (% class="box infomessage" %)
452 452  (((
... ... @@ -464,6 +464,8 @@
464 464  AT+RXDAFORM=1    
465 465  )))
466 466  
505 +
506 +
467 467  **Lora shield configuration:**
468 468  
469 469  Lora Shield example: [[attach:LoRa_Shield_Sketch_For_MQTT.ino||target="_blank"]] , [[attach:arduino-LoRa-master.zip||target="_blank"]]
... ... @@ -471,20 +471,63 @@
471 471  [[image:image-20221101161318-2.png]]
472 472  
473 473  
474 -**Test LG01-V2 to receive Lora Shield data:**
475 475  
515 +**Test LG01v2 to receive Lora Shield data:**
516 +
476 476  [[image:image-20221101161951-3.png]]
477 477  
478 478  
479 -**Test the LG01-V2 to send data:**
480 480  
521 +**Test the LG01v2 to send data:**
522 +
481 481  [[image:image-20221101162527-4.png]]
482 482  
483 483  
484 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
526 +== **8.2 How does LG01v2 communicate with Heltec LoRa Node** ==
485 485  
486 486  
529 +This example describes how to use LG01v2 and Heltec LoRa Node to set up a LoRa network,
530 +
531 +[[image:image-20221112161111-2.png||height="258" width="692"]]
532 +
533 +(% style="color:red" %)**Prerequisites: The configurations of LG01v2 and Lora shield must match**
534 +
535 +
536 +**LG01v2 configuration:**
537 +
538 +(% class="box infomessage" %)
487 487  (((
540 +AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
541 +AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
542 +AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
543 +AT+POWER=14  ~-~--> TX Power Range
544 +AT+CRC=1,1  ~-~--> TX and RX CRC Type
545 +AT+HEADER=0,0  ~-~--> TX and RX Header Type
546 +AT+CR=1,1  ~-~--> TX and RX Coding Rate
547 +AT+IQ=0,0  ~-~--> TX and RX InvertIQ
548 +AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
549 +AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
550 +AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode,RX window always open
551 +AT+RXDAFORM=1  ~-~--> RX data format**（0: Hex ,1: String）**
552 +)))
553 +
554 +
555 +After we upload the sketch to Heltec LoRa Node, we can see below output from Arduino.
556 +
557 +Lora Shield example: [[attach:LoRa_send_trial.ino||target="_blank"]]
558 +
559 +[[image:image-20221112162733-3.png||height="524" width="927"]]
560 +
561 +
562 +And we can see the logread of gateway as below, means the packet arrive gateway:
563 +
564 +[[image:image-20221112163119-4.png||height="808" width="560"]]
565 +
566 +
567 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**9. Supports**(%%) =
568 +
569 +
570 +(((
488 488  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
489 489  )))
490 490  
... ... @@ -492,29 +492,24 @@
492 492  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
493 493  
494 494  
578 += **10. Reference** =
495 495  
496 -= **9. Reference** =
497 497  
581 +* Install Tago Core: Refer **Install Tago Core in LG01v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
582 +* [[Advance OS Reference Guide for L>>doc:Main.Armbian OS instruction.WebHome]]G01v2.
498 498  
499 -* Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
500 -* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
501 -
502 502  
503 503  )))
504 504  
505 -= **10. Order Info** =
587 += **11. Order Info** =
506 506  
507 507  
508 -(% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
590 +(% style="color:#0000ff" %)**LG01v2-XXX-YYY**
509 509  
510 510  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
511 511  
512 -* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
513 -* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
514 -* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
515 -* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
516 -* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
517 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
594 +* (% style="color:red" %)**868**(%%): For frequency : 863 ~~ 870Mhz
595 +* (% style="color:red" %)**915**(%%): For frequency : 902 ~~ 928Mhz
518 518  
519 519  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
520 520  
... ... @@ -526,10 +526,9 @@
526 526  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
527 527  
528 528  
607 += **12. Manufacturer Info** =
529 529  
530 -= **10. Manufacturer Info** =
531 531  
532 -
533 533  **Shenzhen Dragino Technology Development co. LTD**
534 534  
535 535  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -537,10 +537,9 @@
537 537  LongCheng Street, LongGang District ; Shenzhen 518116,China
538 538  
539 539  
617 += **13. FCC Warning** =
540 540  
541 -= **11. FCC Warning** =
542 542  
543 -
544 544  (((
545 545  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
546 546  )))
... ... @@ -570,7 +570,6 @@
570 570  (((
571 571  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
572 572  
649 +
573 573  
574 574  )))
575 -
576 -~)~)~)
Log-Temperature-Sensor-and-send-data-to-node-red.json
Size
... ... @@ -1,1 +1,1 @@
1 -806 bytes
1 +10.1 KB
Content
... ... @@ -1,5 +1,13 @@
1 1  [
2 2   {
3 + "id": "5f10779accc05655",
4 + "type": "tab",
5 + "label": "serial USB",
6 + "disabled": false,
7 + "info": "",
8 + "env": []
9 + },
10 + {
3 3   "id": "4ea60ce4df40717c",
4 4   "type": "serial in",
5 5   "z": "5f10779accc05655",
... ... @@ -15,6 +15,364 @@
15 15   ]
16 16   },
17 17   {
26 + "id": "fe5a93a52b6adcf1",
27 + "type": "inject",
28 + "z": "5f10779accc05655",
29 + "name": "AT+SEND=1,hello world,0,3",
30 + "props": [
31 + {
32 + "p": "payload"
33 + }
34 + ],
35 + "repeat": "",
36 + "crontab": "",
37 + "once": false,
38 + "onceDelay": 0.1,
39 + "topic": "",
40 + "payload": "AT+SEND=1,hello world,0,3",
41 + "payloadType": "str",
42 + "x": 220,
43 + "y": 260,
44 + "wires": [
45 + [
46 + "3f8add7e2e1d1d17"
47 + ]
48 + ]
49 + },
50 + {
51 + "id": "3f8add7e2e1d1d17",
52 + "type": "serial out",
53 + "z": "5f10779accc05655",
54 + "name": "",
55 + "serial": "bb1c0e81fd51fa9e",
56 + "x": 540,
57 + "y": 260,
58 + "wires": []
59 + },
60 + {
61 + "id": "16e7d3d83d9e9415",
62 + "type": "inject",
63 + "z": "5f10779accc05655",
64 + "name": "",
65 + "props": [
66 + {
67 + "p": "payload"
68 + }
69 + ],
70 + "repeat": "",
71 + "crontab": "",
72 + "once": false,
73 + "onceDelay": 0.1,
74 + "topic": "",
75 + "payload": "ATZ",
76 + "payloadType": "str",
77 + "x": 290,
78 + "y": 320,
79 + "wires": [
80 + [
81 + "3f8add7e2e1d1d17"
82 + ]
83 + ]
84 + },
85 + {
86 + "id": "09ea381519629dae",
87 + "type": "inject",
88 + "z": "5f10779accc05655",
89 + "name": "AT+FRE",
90 + "props": [
91 + {
92 + "p": "payload"
93 + }
94 + ],
95 + "repeat": "",
96 + "crontab": "",
97 + "once": false,
98 + "onceDelay": 0.1,
99 + "topic": "",
100 + "payload": "AT+FRE=868.100,868.100",
101 + "payloadType": "str",
102 + "x": 280,
103 + "y": 380,
104 + "wires": [
105 + [
106 + "3f8add7e2e1d1d17"
107 + ]
108 + ]
109 + },
110 + {
111 + "id": "5167a7f904013ffd",
112 + "type": "inject",
113 + "z": "5f10779accc05655",
114 + "name": "AT+BW",
115 + "props": [
116 + {
117 + "p": "payload"
118 + }
119 + ],
120 + "repeat": "",
121 + "crontab": "",
122 + "once": false,
123 + "onceDelay": 0.1,
124 + "topic": "",
125 + "payload": "AT+BW=0,0",
126 + "payloadType": "str",
127 + "x": 290,
128 + "y": 440,
129 + "wires": [
130 + [
131 + "3f8add7e2e1d1d17"
132 + ]
133 + ]
134 + },
135 + {
136 + "id": "dbe4abbc730c76e6",
137 + "type": "inject",
138 + "z": "5f10779accc05655",
139 + "name": "AT+SF",
140 + "props": [
141 + {
142 + "p": "payload"
143 + }
144 + ],
145 + "repeat": "",
146 + "crontab": "",
147 + "once": false,
148 + "onceDelay": 0.1,
149 + "topic": "",
150 + "payload": "AT+SF=12,12",
151 + "payloadType": "str",
152 + "x": 290,
153 + "y": 500,
154 + "wires": [
155 + [
156 + "3f8add7e2e1d1d17"
157 + ]
158 + ]
159 + },
160 + {
161 + "id": "3be3ab296a75d512",
162 + "type": "inject",
163 + "z": "5f10779accc05655",
164 + "name": "AT+RXMOD",
165 + "props": [
166 + {
167 + "p": "payload"
168 + }
169 + ],
170 + "repeat": "",
171 + "crontab": "",
172 + "once": false,
173 + "onceDelay": 0.1,
174 + "topic": "",
175 + "payload": "AT+RXMOD=65535,2",
176 + "payloadType": "str",
177 + "x": 270,
178 + "y": 560,
179 + "wires": [
180 + [
181 + "3f8add7e2e1d1d17"
182 + ]
183 + ]
184 + },
185 + {
186 + "id": "7a03d1413c60ea1c",
187 + "type": "inject",
188 + "z": "5f10779accc05655",
189 + "name": "AT+SYNCWORD",
190 + "props": [
191 + {
192 + "p": "payload"
193 + }
194 + ],
195 + "repeat": "",
196 + "crontab": "",
197 + "once": false,
198 + "onceDelay": 0.1,
199 + "topic": "",
200 + "payload": "AT+SYNCWORD=0",
201 + "payloadType": "str",
202 + "x": 260,
203 + "y": 620,
204 + "wires": [
205 + [
206 + "3f8add7e2e1d1d17"
207 + ]
208 + ]
209 + },
210 + {
211 + "id": "40eac96a52733f7a",
212 + "type": "function",
213 + "z": "5f10779accc05655",
214 + "name": "function 1",
215 + "func": "var data = msg.payload\nif (data.substring(0, 4) == \"Data\")\n{\n if (data.substring(6, 12) == \"(HEX:)\")\n {\n var temp = data.substring(13, 15) + data.substring(16, 18)\n var hum = data.substring(19, 21) + data.substring(22, 24)\n var temp1 = parseInt(temp, 16)/100\n var hum1 = parseInt(hum, 16)/10\n var a1 = { payload: temp1 }, a2 = { payload: hum1 }\n }\n}\nif (data.substring(0, 4) == \"Rssi\")\n{\n var rssi = data.substring(6)\n var a3 = { payload: rssi }\n}\nreturn [a1,a2,a3];\n \n\n",
216 + "outputs": 3,
217 + "noerr": 0,
218 + "initialize": "",
219 + "finalize": "",
220 + "libs": [],
221 + "x": 420,
222 + "y": 60,
223 + "wires": [
224 + [
225 + "81edb003937f1a92"
226 + ],
227 + [
228 + "c63593404a60d9dc"
229 + ],
230 + [
231 + "61ca71032888887b"
232 + ]
233 + ]
234 + },
235 + {
236 + "id": "61ca71032888887b",
237 + "type": "ui_chart",
238 + "z": "5f10779accc05655",
239 + "name": "",
240 + "group": "ef41b39771110fa5",
241 + "order": 1,
242 + "width": 0,
243 + "height": 0,
244 + "label": "RSSI",
245 + "chartType": "line",
246 + "legend": "false",
247 + "xformat": "dd HH:mm",
248 + "interpolate": "linear",
249 + "nodata": "",
250 + "dot": true,
251 + "ymin": "",
252 + "ymax": "",
253 + "removeOlder": 1,
254 + "removeOlderPoints": "",
255 + "removeOlderUnit": "3600",
256 + "cutout": 0,
257 + "useOneColor": false,
258 + "useUTC": false,
259 + "colors": [
260 + "#1f77b4",
261 + "#aec7e8",
262 + "#ff7f0e",
263 + "#2ca02c",
264 + "#98df8a",
265 + "#d62728",
266 + "#ff9896",
267 + "#9467bd",
268 + "#c5b0d5"
269 + ],
270 + "outputs": 1,
271 + "useDifferentColor": false,
272 + "className": "",
273 + "x": 670,
274 + "y": 180,
275 + "wires": [
276 + []
277 + ]
278 + },
279 + {
280 + "id": "81edb003937f1a92",
281 + "type": "ui_chart",
282 + "z": "5f10779accc05655",
283 + "name": "",
284 + "group": "7e1d1c102cf74e6b",
285 + "order": 1,
286 + "width": 0,
287 + "height": 0,
288 + "label": "Temperature",
289 + "chartType": "line",
290 + "legend": "false",
291 + "xformat": "HH:mm:ss",
292 + "interpolate": "linear",
293 + "nodata": "",
294 + "dot": true,
295 + "ymin": "",
296 + "ymax": "",
297 + "removeOlder": 1,
298 + "removeOlderPoints": "",
299 + "removeOlderUnit": "3600",
300 + "cutout": 0,
301 + "useOneColor": false,
302 + "useUTC": false,
303 + "colors": [
304 + "#1f77b4",
305 + "#aec7e8",
306 + "#ff7f0e",
307 + "#2ca02c",
308 + "#98df8a",
309 + "#d62728",
310 + "#ff9896",
311 + "#9467bd",
312 + "#c5b0d5"
313 + ],
314 + "outputs": 1,
315 + "useDifferentColor": false,
316 + "className": "",
317 + "x": 690,
318 + "y": 100,
319 + "wires": [
320 + []
321 + ]
322 + },
323 + {
324 + "id": "c63593404a60d9dc",
325 + "type": "ui_chart",
326 + "z": "5f10779accc05655",
327 + "name": "",
328 + "group": "3f5d139f158d7c1c",
329 + "order": 2,
330 + "width": 0,
331 + "height": 0,
332 + "label": "Humidity",
333 + "chartType": "line",
334 + "legend": "false",
335 + "xformat": "HH:mm:ss",
336 + "interpolate": "linear",
337 + "nodata": "",
338 + "dot": true,
339 + "ymin": "",
340 + "ymax": "",
341 + "removeOlder": 1,
342 + "removeOlderPoints": "",
343 + "removeOlderUnit": "3600",
344 + "cutout": 0,
345 + "useOneColor": false,
346 + "useUTC": false,
347 + "colors": [
348 + "#1f77b4",
349 + "#aec7e8",
350 + "#ff7f0e",
351 + "#2ca02c",
352 + "#98df8a",
353 + "#d62728",
354 + "#ff9896",
355 + "#9467bd",
356 + "#c5b0d5"
357 + ],
358 + "outputs": 1,
359 + "useDifferentColor": false,
360 + "className": "",
361 + "x": 680,
362 + "y": 140,
363 + "wires": [
364 + []
365 + ]
366 + },
367 + {
368 + "id": "79722a224bb22c96",
369 + "type": "debug",
370 + "z": "5f10779accc05655",
371 + "name": "debug 1",
372 + "active": true,
373 + "tosidebar": true,
374 + "console": false,
375 + "tostatus": false,
376 + "complete": "false",
377 + "statusVal": "",
378 + "statusType": "auto",
379 + "x": 420,
380 + "y": 180,
381 + "wires": []
382 + },
383 + {
18 18   "id": "bb1c0e81fd51fa9e",
19 19   "type": "serial-port",
20 20   "serialport": "/dev/ttyUSB0",
... ... @@ -32,5 +32,46 @@
32 32   "out": "char",
33 33   "addchar": "\\r\\n",
34 34   "responsetimeout": "10000"
401 + },
402 + {
403 + "id": "ef41b39771110fa5",
404 + "type": "ui_group",
405 + "name": "rssi",
406 + "tab": "abb98f80600a5448",
407 + "order": 3,
408 + "disp": true,
409 + "width": "6",
410 + "collapse": false,
411 + "className": ""
412 + },
413 + {
414 + "id": "7e1d1c102cf74e6b",
415 + "type": "ui_group",
416 + "name": "TEM",
417 + "tab": "abb98f80600a5448",
418 + "order": 4,
419 + "disp": true,
420 + "width": "6",
421 + "collapse": false,
422 + "className": ""
423 + },
424 + {
425 + "id": "3f5d139f158d7c1c",
426 + "type": "ui_group",
427 + "name": "HUM",
428 + "tab": "abb98f80600a5448",
429 + "order": 2,
430 + "disp": true,
431 + "width": "6",
432 + "collapse": false,
433 + "className": ""
434 + },
435 + {
436 + "id": "abb98f80600a5448",
437 + "type": "ui_tab",
438 + "name": "LG01v2",
439 + "icon": "LG01v2",
440 + "disabled": false,
441 + "hidden": false
35 35   }
36 36  ]
LoRa_send_trial.ino
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +3.4 KB
Content
... ... @@ -1,0 +1,124 @@
1 +#include "LoRaWan_APP.h"
2 +#include "Arduino.h"
3 +
4 +
5 +#define RF_FREQUENCY 868100000 // Hz
6 +
7 +#define TX_OUTPUT_POWER 5 // dBm
8 +
9 +#define LORA_BANDWIDTH 0 // [0: 125 kHz,
10 + // 1: 250 kHz,
11 + // 2: 500 kHz,
12 + // 3: Reserved]
13 +#define LORA_SPREADING_FACTOR 12 // [SF7..SF12]
14 +#define LORA_CODINGRATE 1 // [1: 4/5,
15 + // 2: 4/6,
16 + // 3: 4/7,
17 + // 4: 4/8]
18 +#define LORA_PREAMBLE_LENGTH 8 // Same for Tx and Rx
19 +#define LORA_SYMBOL_TIMEOUT 0 // Symbols
20 +#define LORA_FIX_LENGTH_PAYLOAD_ON false
21 +#define LORA_IQ_INVERSION_ON false
22 +
23 +
24 +#define RX_TIMEOUT_VALUE 1000
25 +#define BUFFER_SIZE 30 // Define the payload size here
26 +
27 +float tem,hum;
28 +char tem_1[8]={"\0"},hum_1[8]={"\0"};
29 +char *node_id = "<GW01>"; //From LG01 via web Local Channel settings on MQTT.Please refer <> dataformat in here.
30 +
31 +char txpacket[BUFFER_SIZE];
32 +char rxpacket[BUFFER_SIZE];
33 +
34 +double txNumber;
35 +
36 +bool lora_idle=true;
37 +
38 +static RadioEvents_t RadioEvents;
39 +void OnTxDone( void );
40 +void OnTxTimeout( void );
41 +
42 +void dhtTem()
43 +{
44 + tem = random(15,40);
45 + hum = random(40,80);
46 + Serial.println(F("The temperature and humidity:"));
47 + Serial.print("[");
48 + Serial.print(tem);
49 + Serial.print("℃");
50 + Serial.print(",");
51 + Serial.print(hum);
52 + Serial.print("%");
53 + Serial.print("]");
54 + Serial.println("");
55 +}
56 +
57 +void dhtWrite()
58 +{
59 + char data[50] = "\0";
60 + for(int i = 0; i < 50; i++)
61 + {
62 + data[i] = node_id[i];
63 + }
64 +
65 + dtostrf(tem,0,1,tem_1);
66 + dtostrf(hum,0,1,hum_1);
67 +
68 + strcat(data,"tem_a=");
69 + strcat(data,tem_1);
70 + strcat(data,"&hum_a=");
71 + strcat(data,hum_1);
72 + strcpy((char *)txpacket,data);
73 +
74 + Serial.println((char *)txpacket);
75 +}
76 +
77 +void setup() {
78 + Serial.begin(115200);
79 + Mcu.begin();
80 +
81 + txNumber=0;
82 +
83 + RadioEvents.TxDone = OnTxDone;
84 + RadioEvents.TxTimeout = OnTxTimeout;
85 +
86 + Radio.Init( &RadioEvents );
87 + Radio.SetChannel( RF_FREQUENCY );
88 + Radio.SetTxConfig( MODEM_LORA, TX_OUTPUT_POWER, 0, LORA_BANDWIDTH,
89 + LORA_SPREADING_FACTOR, LORA_CODINGRATE,
90 + LORA_PREAMBLE_LENGTH, LORA_FIX_LENGTH_PAYLOAD_ON,
91 + true, 0, 0, LORA_IQ_INVERSION_ON, 3000 );
92 + }
93 +
94 +
95 +
96 +void loop()
97 +{
98 + if(lora_idle == true)
99 + {
100 + delay(5000);
101 + txNumber += 0.01;
102 + Serial.println(txNumber);
103 +
104 + dhtTem();
105 + dhtWrite();
106 + Radio.Send( (uint8_t *)txpacket, strlen(txpacket) ); //send the package out
107 + lora_idle = false;
108 + }
109 + Radio.IrqProcess( );
110 +}
111 +
112 +void OnTxDone( void )
113 +{
114 + Serial.println("TX done......");
115 + lora_idle = true;
116 +}
117 +
118 +void OnTxTimeout( void )
119 +{
120 + Radio.Sleep( );
121 + Serial.println("TX Timeout......");
122 + lora_idle = true;
123 +}
124 +
image-20221112161031-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.1 KB
Content
image-20221112161111-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20221112162733-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +78.7 KB
Content
image-20221112163119-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +32.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0