Changes for page LG01v2 -- LoRa Gateway User Manual

Last modified by Kilight Cao on 2024/03/04 09:10

From version < 81.1 >

edited by Kilight Cao
on 2022/11/08 17:22

To version < 110.1 >

edited by Kilight Cao
on 2023/02/16 09:37

Change comment: Uploaded new attachment "Log-Temperature-Sensor-and-send-data-to-Node-red.json", version {1}

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)
Attachments (0 modified, 12 added, 0 removed)

Details

Page properties

Content

@@ -11,23 +11,30 @@
  {{toc/}}
--= **1. Introduction** =
--== **1.1 What is LG01-V2** ==
++
++= **1. Introduction** =
++
++== **1.1 What is LG01v2** ==
++
++
  (((
  (((
--The LG01-V2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
++The LG01v2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
++
++LG01v2 is specially design for (% style="color:green" %)**peer to peer LoRa**(%%) protocol instead of LoRaWAN protocol. The LG01v2 use single channel LoRa module to minimize the deployment cost for a private p2p LoRa wireless network.
  )))
  (((
--LG01-V2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
++LG01v2 uses Open Source Linux system. User can modify the Linux part and develop customize software base on it. It has (% style="color:green" %)**1.2Ghz Quad-Core CPU**(%%) , (% style="color:green" %)**4GB eMMC storage**(%%) and (% style="color:green" %)**512MB RAM**(%%) for most application.
++
++LG01v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
  )))
--
  == **1.2 Specifications** ==
@@ -56,7 +56,6 @@
  * Remote Management
  * Auto-provisioning for batch deployment and management
  * LoRa Gateway
--* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
  == **1.4 Block Diagram** ==
@@ -84,7 +84,6 @@
  (% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
--
  == **1.6 Button Intruction** ==
@@ -101,7 +101,6 @@
                                                       //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
--
  = **2. Quick Start** =
@@ -112,7 +112,6 @@
  == **2.1 Connects to the network and accesses the gateway Web UI** ==
--
  == **2.1.1 connect the network.** ==
@@ -145,11 +145,11 @@
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102847-7.png?rev=1.1||alt="image-20220622102847-7.png"]]
--
  = **3. Web Configure Pages** =
  == **3.1 Home** ==
++
  //Shows the system running status~://
  [[image:image-20221104155612-1.png||height="497" width="942"]]
@@ -157,7 +157,6 @@
  == **3.2 Network Settings** ==
--
  === **3.2.1 Network ~-~-> WiFi** ===
@@ -164,7 +164,6 @@
  [[image:image-20221104155654-2.png||height="319" width="813"]]
--
  === **3.4.2 Network ~-~-> System Status** ===
@@ -171,7 +171,6 @@
  [[image:image-20221104155724-3.png||height="679" width="861"]]
--
  === **3.4.3 Network ~-~-> Firewall** ===
@@ -178,10 +178,8 @@
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616115351-6.png?width=661&height=244&rev=1.1||alt="image-20220616115351-6.png"]]
--
  == **3.5 System** ==
--
  === **3.5.1  System ~-~-> System Overview** ===
@@ -190,7 +190,6 @@
  [[image:image-20221104155907-4.png]]
--
  === **3.5.2 System ~-~-> Backup/Restore** ===
@@ -211,15 +211,13 @@
           **Path**: System ~-~-> Built-in Server
--**Troubleshooting:**
++(% style="color:blue" %)**Troubleshooting：**
--
  **~         1. URL does not jump properly**
                  For the Node-Red, you can use the local IP address and the port is 1880 to access it.
--
  == **4.1 Application Server ~-~- Node-Red** ==
@@ -234,10 +234,9 @@
  = **5. How to configure the Lora Gateway** =
++== **5.1 Configure and Debug LoRa wireless of LG01v2** ==
--== **5.1 Access the Lora configuration page** ==
--
  Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**:
  (% class="box infomessage" %)
@@ -258,7 +258,9 @@
  )))
--(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**(%%)
++(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**
++
++
  (% style="color:red" %)[[image:image-20221029174703-3.png]]
@@ -267,40 +267,128 @@
  (% class="box infomessage" %)
  (((
--AT+FRE=868.100,868.100                    ~-~--> TX and RX frequency
--AT+GROUPMOD=0,0                           ~-~--> TX and RX group
--AT+BW=0,0                                          ~-~--> TX and RX Bandwidth
--AT+SF=12,12                                        ~-~--> TX and RX Spreading Factor
--AT+POWER=14                                    ~-~--> TX Power Range
++**AT+FRE=868.100,868.100                   ~-~--> TX and RX frequency
++AT+GROUPMOD=0,0                          ~-~-->  TX and RX group
++AT+BW=0,0                                         ~-~-->  TX and RX Bandwidth
++AT+SF=12,12                                       ~-~-->  TX and RX Spreading Factor
++AT+POWER=14                                   ~-~-->  TX Power Range
++AT+CRC=1,1                                        ~-~-->  TX and RX CRC Type
++AT+HEADER=0,0                                 ~-~-->  TX and RX Header Type
++AT+CR=1,1                                          ~-~-->  TX and RX Coding Rate
++AT+IQ=0,0                                           ~-~-->  TX and RX InvertIQ
++AT+PREAMBLE=8,8                            ~-~-->  TX and RX Preamble Length
++AT+SYNCWORD=0                             ~-~-->  Syncword(0: private，1: public)
++AT+RXMOD=65535,0                         ~-~-->  Rx Timeout and Reply mode
++AT+RXDAFORM=1**
++)))
++
++
++== **5.2 Example: LG01v2** ==
++
++=== **5.2.1 Introduce for the example:** ===
++
++
++[[image:image-20221104102736-3.png||height="282" width="723"]]
++
++
++In this example, there are two devices:
++
++* **LA66 Shield + UNO + DHT11**: The UNO will get the temperature and humidity and broadcast the value via LoRa protocol.
++* **LG01v2** : LG01v2 is set to listening the LoRa Channel which LA66 is broadcasting. When LG01v2 get the data from LA66, LG01v2 will plot the data in built-in IoT server.
++
++=== **5.2.2 Set Up LA66 Shield + UNO** ===
++
++
++==== **Set up LA66 Module** ====
++
++
++LA66 Module is loaded with the firmware **[[LA66 Peer-to-Peer firmware>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]] **and user can use AT Command to set up LA66 with below parameters:
++
++(((
++(% style="color:red" %)**LA66 Shield as Sender: **
++
++(% class="box infomessage" %)
++(((
++**LA66 Shield configuration:**
++
++AT+FRE=868.100,868.100                    ~-~--> TX and RX frequency set: 868100000
++AT+BW=0,0                                          ~-~--> TX and RX Bandwidth set: 125kHz
++AT+SF=12,12                                        ~-~--> TX and RX Spreading Factor set: SF12
++AT+POWER=14                                    ~-~--> TX Power Range set: 14dBm
  AT+CRC=1,1                                         ~-~--> TX and RX CRC Type
  AT+HEADER=0,0                                  ~-~--> TX and RX Header Type
  AT+CR=1,1                                           ~-~--> TX and RX Coding Rate
  AT+IQ=0,0                                            ~-~--> TX and RX InvertIQ
--AT+PREAMBLE=8,8                              ~-~--> TX and RX Preamble Length
++AT+PREAMBLE=8,8                              ~-~--> TX and RX Preamble Length set: 8
  AT+SYNCWORD=0                              ~-~-->  Syncword**(0: private，1: public)**
--AT+RXMOD=65535,0                          ~-~-->  Rx Timeout and Reply mode
--AT+RXDAFORM=1
++AT+RXMOD=6,0                                  ~-~-->  Rx Timeout and Reply mode
  )))
++)))
--== **5.2 Example: LG01**-**V2 Peer-to-Peer** ==
++==== **Set up Arduino UNO** ====
--[[image:image-20221104102736-3.png||height="282" width="723"]]
++(% id="cke_bm_1033249S" style="display:none" %)** **
++**Hardware Connection**
--The user can run the AT command to set the LG01-V2 RX window always open as a Receiver, the LA66 Shield uses **AT+SEND=1,hello world,2,3** to simulate sending data,
++(% class="box infomessage" %)
++(((
++**The DHT11 sensor connects to the LA66 Shield:**
--**Prerequisites: **The configuration of LG01-V2 and  LA66 Shield must match, users can use **AT+CFG** to check all configurations.
++**VCC   <~-~--> 3.3V (Red line)**
++**DATA <~-~--> PIN8 (Purple line)**
++**GND  <~-~--> GND (White line)**
++)))
++[[image:image-20221108170731-5.png||height="588" width="441"]]
--(% style="color:red; font-weight:bold" %)**LG01-V**(% style="color:red" %)**2 as Receiver: (configured as AT+RXMOD=65535,2)**
--**LG01-V2 configuration:**
++===== **1. Open Arduino IDE** =====
++
++[[image:image-20221108172149-6.png||height="650" width="542"]]
++
++
++
++===== **2. Open project** =====
++
++
++Users can download Arduino files from this link: [[attach:Log-Temperature-Sensor-and-send-data-to-Node-red.ino||target="_blank"]]
++
++Then click Compile and Upload to LA66 Shield,
++
++[[image:image-20221108172432-7.png]]
++
++
++
++===== **3. Open the Serial Monitor to check the LA66 Shield data** =====
++
++
++The UNO will now reads the temperature and humidity data from the sensor and broadcast it via LoRa wireless,
++
++[[image:image-20221108174840-8.png||height="731" width="671"]]
++
++
++
++Sending out data as below.
++
++[[image:image-20221108175113-9.png||height="556" width="998"]]
++
++
++=== **5.2.3 Set Up LG01v2** ===
++
++
++Configure LG01v2 LoRa channel parameters so it can get data from LA66 Shield
++
++(% style="color:red; font-weight:bold" %)**LG01v**(% style="color:red" %)**2 as Receiver: (configured as AT+RXMOD=65535,2)**
++
  (% class="box infomessage" %)
  (((
++**LG01-V2 configuration:**
++
  AT+FRE=868.100,868.100                    ~-~--> TX and RX frequency set: 868100000
  AT+BW=0,0                                          ~-~--> TX and RX Bandwidth set: 125kHz
  AT+SF=12,12                                        ~-~--> TX and RX Spreading Factor set: SF12
@@ -310,36 +310,53 @@
  AT+CR=1,1                                           ~-~--> TX and RX Coding Rate
  AT+IQ=0,0                                            ~-~--> TX and RX InvertIQ
  AT+PREAMBLE=8,8                              ~-~--> TX and RX Preamble Length set: 8
--AT+SYNCWORD=0                              ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
--AT+RXMOD=65535,0                          ~-~-->  Rx Timeout and Reply mode, RX window always open
--AT+RXDAFORM=1
++AT+SYNCWORD=0                              ~-~-->  Syncword**(0: private，1: public)**
++AT+RXMOD=65535,2                          ~-~-->  Rx Timeout and Reply mode, RX window always open**(0:No ACK, 1:Reply mode, 2:Send an ACK once got a  message from another device. ACK Content is 0x00 FF )**
  )))
--[[image:image-20221102140053-4.png]]
++=== **5.2.4 Test result** ===
--(% style="color:red" %)**LA66 Shield as Sender: (AT+SEND=1,hello world,2,3)**
--[[image:1667456058832-484.png||height="291" width="353"]]
++After the above configuration is complete, users can send test simulation data to check whether the configuration is correct, In LA66 sheild serial console send:(% style="color:red" %)**(AT+SEND=1,hello world,2,3).**
++)))
++When LG01v2 replies with ACK when it receives a packet sent by LA66 sheild.
--Instruction for Peer-to-Peer firmware:[[ **Instruction **>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]
--)))
++[[image:image-20221108164413-2.png]]
--Users can import this example in node-red: **[[attach:serial USB.json||target="_blank"]]**
--[[image:image-20221104100520-2.png||height="605" width="1150"]]
++In the real-time log of LG01v2：
++[[image:image-20221108170314-3.png]]
--= (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**-V(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
++=== **5.2.5 Plot data chart in LG01v2** ===
--(% style="color:blue" %)**USB TTL to LG01-V2  Connection:**
++User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
--Port 1 of the UART on the LG01-V2 is GND
++User can import this example in Node-Red: [[attach:Log-Temperature-Sensor-and-send-data-to-node-red.json||target="_blank"]]
++[[image:image-20221108180334-10.png||height="651" width="1141"]]
++
++
++The temperature and humidity chart is displayed in the built-in node-red UI
++
++**Browser input: (% style="background-color:yellow" %)__//http:~/~/<local-IPV4-address>//__(%%)**
++
++[[image:image-20221108180458-11.png||height="402" width="1137"]]
++
++
++= (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**v(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
++
++
++(% style="color:blue" %)**USB TTL to LG01v2  Connection:**
++
++
++Port 1 of the UART on the LG01v2 is GND
++
  (% class="box infomessage" %)
  (((
  **TXD  <~-~--> UART RXD (Gray line)**
@@ -350,7 +350,7 @@
  )))
--**LG01-V2 UART connection photo**
++**LG01v2 UART connection photo**
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
@@ -361,23 +361,29 @@
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
++
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
--= **7. FAQ** =
++= **7. OTA System Update** =
--== **7.1 How does LG01-V2 communicate with Lora shield (LoRa.h)** ==
++LG01v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
--This example describes how to use LG01-V2, LoRa Shield to set up a LoRa network
++= **8. FAQ** =
++== **8.1 How does LG01v2 communicate with Lora shield (LoRa.h)** ==
++
++
++This example describes how to use LG01v2, LoRa Shield to set up a LoRa network,
++
  [[image:image-20221103152238-8.png||height="251" width="654"]]
--(% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
++(% style="color:red" %)**Prerequisites: The configurations of LG01v2 and Lora shield must match**
--**LG01-V2 configuration:**
++**LG01v2 configuration:**
  (% class="box infomessage" %)
  (((
@@ -395,6 +395,8 @@
  AT+RXDAFORM=1
  )))
++
++
  **Lora shield configuration:**
  Lora Shield example: [[attach:LoRa_Shield_Sketch_For_MQTT.ino||target="_blank"]] , [[attach:arduino-LoRa-master.zip||target="_blank"]]
@@ -402,20 +402,63 @@
  [[image:image-20221101161318-2.png]]
--**Test LG01-V2 to receive Lora Shield data:**
++**Test LG01v2 to receive Lora Shield data:**
++
  [[image:image-20221101161951-3.png]]
--**Test the LG01-V2 to send data:**
++**Test the LG01v2 to send data:**
++
  [[image:image-20221101162527-4.png]]
--= (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
++== **8.2 How does LG01v2 communicate with Heltec LoRa Node** ==
++This example describes how to use LG01v2 and Heltec LoRa Node to set up a LoRa network,
++
++[[image:image-20221112161111-2.png||height="258" width="692"]]
++
++(% style="color:red" %)**Prerequisites: The configurations of LG01v2 and Lora shield must match**
++
++
++**LG01v2 configuration:**
++
++(% class="box infomessage" %)
  (((
++AT+FRE=868.100,868.100                    ~-~--> TX and RX frequency set: 868100000
++AT+BW=0,0                                          ~-~--> TX and RX Bandwidth set: 125kHz
++AT+SF=12,12                                        ~-~--> TX and RX Spreading Factor set: SF12
++AT+POWER=14                                    ~-~--> TX Power Range
++AT+CRC=1,1                                         ~-~--> TX and RX CRC Type
++AT+HEADER=0,0                                  ~-~--> TX and RX Header Type
++AT+CR=1,1                                           ~-~--> TX and RX Coding Rate
++AT+IQ=0,0                                            ~-~--> TX and RX InvertIQ
++AT+PREAMBLE=8,8                              ~-~--> TX and RX Preamble Length set: 8
++AT+SYNCWORD=0                              ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
++AT+RXMOD=65535,0                          ~-~-->  Rx Timeout and Reply mode,RX window always open
++AT+RXDAFORM=1                               ~-~--> RX data format**（0: Hex ,1: String）**
++)))
++
++
++After we upload the sketch to Heltec LoRa Node, we can see below output from Arduino.
++
++Lora Shield example: [[attach:LoRa_send_trial.ino||target="_blank"]]
++
++[[image:image-20221112162733-3.png||height="524" width="927"]]
++
++
++And we can see the logread of gateway as below, means the packet arrive gateway:
++
++[[image:image-20221112163119-4.png||height="808" width="560"]]
++
++
++= (% style="color:inherit; font-family:inherit; font-size:29px" %)**9. Supports**(%%) =
++
++
++(((
  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
  )))
@@ -423,29 +423,24 @@
  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
++= **10. Reference** =
--= **9. Reference** =
++* Install Tago Core: Refer **Install Tago Core in LG01v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
++* [[Advance OS Reference Guide for L>>doc:Main.Armbian OS instruction.WebHome]]G01v2.
--* Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
--* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
--
  )))
--= **10. Order Info** =
++= **11. Order Info** =
--(% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
++(% style="color:#0000ff" %)**LG01v2-XXX-YYY**
  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
--* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
--* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
--* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
--* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
--* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
--* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
++* (% style="color:red" %)**868**(%%): For frequency : 863 ~~ 870Mhz
++* (% style="color:red" %)**915**(%%): For frequency : 902 ~~ 928Mhz
  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
@@ -457,10 +457,9 @@
  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
++= **12. Manufacturer Info** =
--= **10. Manufacturer Info** =
--
  **Shenzhen Dragino Technology Development co. LTD**
  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
@@ -468,10 +468,9 @@
  LongCheng Street, LongGang District ; Shenzhen 518116,China
++= **13. FCC Warning** =
--= **11. FCC Warning** =
--
  (((
  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  )))
@@ -501,7 +501,6 @@
  (((
  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
++
  )))
--
--~)~)~)

LoRa_send_trial.ino

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+3.4 KB

Content

@@ -1,0 +1,124 @@
++#include "LoRaWan_APP.h"
++#include "Arduino.h"
++
++
++#define RF_FREQUENCY                                868100000 // Hz
++
++#define TX_OUTPUT_POWER                             5        // dBm
++
++#define LORA_BANDWIDTH                              0         // [0: 125 kHz,
++                                                              //  1: 250 kHz,
++                                                              //  2: 500 kHz,
++                                                              //  3: Reserved]
++#define LORA_SPREADING_FACTOR                       12         // [SF7..SF12]
++#define LORA_CODINGRATE                             1         // [1: 4/5,
++                                                              //  2: 4/6,
++                                                              //  3: 4/7,
++                                                              //  4: 4/8]
++#define LORA_PREAMBLE_LENGTH                        8         // Same for Tx and Rx
++#define LORA_SYMBOL_TIMEOUT                         0         // Symbols
++#define LORA_FIX_LENGTH_PAYLOAD_ON                  false
++#define LORA_IQ_INVERSION_ON                        false
++
++
++#define RX_TIMEOUT_VALUE                            1000
++#define BUFFER_SIZE                                 30 // Define the payload size here
++
++float tem,hum;
++char tem_1[8]={"\0"},hum_1[8]={"\0"};
++char *node_id = "<GW01>";  //From LG01 via web Local Channel settings on MQTT.Please refer <> dataformat in here.
++
++char txpacket[BUFFER_SIZE];
++char rxpacket[BUFFER_SIZE];
++
++double txNumber;
++
++bool lora_idle=true;
++
++static RadioEvents_t RadioEvents;
++void OnTxDone( void );
++void OnTxTimeout( void );
++
++void dhtTem()
++{
++       tem = random(15,40);
++       hum = random(40,80);
++       Serial.println(F("The temperature and humidity:"));
++       Serial.print("[");
++       Serial.print(tem);
++       Serial.print("℃");
++       Serial.print(",");
++       Serial.print(hum);
++       Serial.print("%");
++       Serial.print("]");
++       Serial.println("");
++}
++
++void dhtWrite()
++{
++    char data[50] = "\0";
++    for(int i = 0; i < 50; i++)
++    {
++       data[i] = node_id[i];
++    }
++
++    dtostrf(tem,0,1,tem_1);
++    dtostrf(hum,0,1,hum_1);
++
++    strcat(data,"tem_a=");
++    strcat(data,tem_1);
++    strcat(data,"&hum_a=");
++    strcat(data,hum_1);
++    strcpy((char *)txpacket,data);
++
++    Serial.println((char *)txpacket);
++}
++
++void setup() {
++    Serial.begin(115200);
++    Mcu.begin();
++
++    txNumber=0;
++
++    RadioEvents.TxDone = OnTxDone;
++    RadioEvents.TxTimeout = OnTxTimeout;
++
++    Radio.Init( &RadioEvents );
++    Radio.SetChannel( RF_FREQUENCY );
++    Radio.SetTxConfig( MODEM_LORA, TX_OUTPUT_POWER, 0, LORA_BANDWIDTH,
++                                   LORA_SPREADING_FACTOR, LORA_CODINGRATE,
++                                   LORA_PREAMBLE_LENGTH, LORA_FIX_LENGTH_PAYLOAD_ON,
++                                   true, 0, 0, LORA_IQ_INVERSION_ON, 3000 );
++   }
++
++
++
++void loop()
++{
++	if(lora_idle == true)
++	{
++    delay(5000);
++		txNumber += 0.01;
++		Serial.println(txNumber);
++
++    dhtTem();
++    dhtWrite();
++ 		Radio.Send( (uint8_t *)txpacket, strlen(txpacket) ); //send the package out
++    lora_idle = false;
++	}
++  Radio.IrqProcess( );
++}
++
++void OnTxDone( void )
++{
++	Serial.println("TX done......");
++	lora_idle = true;
++}
++
++void OnTxTimeout( void )
++{
++    Radio.Sleep( );
++    Serial.println("TX Timeout......");
++    lora_idle = true;
++}
++

Log-Temperature-Sensor-and-send-data-to-Node-red.json

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+10.3 KB

Content

@@ -1,0 +1,443 @@
++[
++    {
++        "id": "0a211e08511c4bdd",
++        "type": "tab",
++        "label": "serial USB",
++        "disabled": false,
++        "info": "",
++        "env": []
++    },
++    {
++        "id": "4a97eeb54bf57a6d",
++        "type": "serial in",
++        "z": "0a211e08511c4bdd",
++        "name": "",
++        "serial": "bb1c0e81fd51fa9e",
++        "x": 210,
++        "y": 60,
++        "wires": [
++            [
++                "d2493fb9752dbcab",
++                "d183c255973c979e"
++            ]
++        ]
++    },
++    {
++        "id": "12f1eeb8049675c1",
++        "type": "inject",
++        "z": "0a211e08511c4bdd",
++        "name": "AT+SEND=1,hello world,0,3",
++        "props": [
++            {
++                "p": "payload"
++            }
++        ],
++        "repeat": "",
++        "crontab": "",
++        "once": false,
++        "onceDelay": 0.1,
++        "topic": "",
++        "payload": "AT+SEND=1,hello world,0,3",
++        "payloadType": "str",
++        "x": 220,
++        "y": 260,
++        "wires": [
++            [
++                "a5d2f5df63a2148e"
++            ]
++        ]
++    },
++    {
++        "id": "a5d2f5df63a2148e",
++        "type": "serial out",
++        "z": "0a211e08511c4bdd",
++        "name": "",
++        "serial": "bb1c0e81fd51fa9e",
++        "x": 540,
++        "y": 260,
++        "wires": []
++    },
++    {
++        "id": "dc04c04a0bc0e5db",
++        "type": "inject",
++        "z": "0a211e08511c4bdd",
++        "name": "",
++        "props": [
++            {
++                "p": "payload"
++            }
++        ],
++        "repeat": "",
++        "crontab": "",
++        "once": false,
++        "onceDelay": 0.1,
++        "topic": "",
++        "payload": "ATZ",
++        "payloadType": "str",
++        "x": 290,
++        "y": 320,
++        "wires": [
++            [
++                "a5d2f5df63a2148e"
++            ]
++        ]
++    },
++    {
++        "id": "3de96a220e28e8f0",
++        "type": "inject",
++        "z": "0a211e08511c4bdd",
++        "name": "AT+FRE",
++        "props": [
++            {
++                "p": "payload"
++            }
++        ],
++        "repeat": "",
++        "crontab": "",
++        "once": false,
++        "onceDelay": 0.1,
++        "topic": "",
++        "payload": "AT+FRE=868.100,868.100",
++        "payloadType": "str",
++        "x": 280,
++        "y": 380,
++        "wires": [
++            [
++                "a5d2f5df63a2148e"
++            ]
++        ]
++    },
++    {
++        "id": "638725a47a1e4365",
++        "type": "inject",
++        "z": "0a211e08511c4bdd",
++        "name": "AT+BW",
++        "props": [
++            {
++                "p": "payload"
++            }
++        ],
++        "repeat": "",
++        "crontab": "",
++        "once": false,
++        "onceDelay": 0.1,
++        "topic": "",
++        "payload": "AT+BW=0,0",
++        "payloadType": "str",
++        "x": 290,
++        "y": 440,
++        "wires": [
++            [
++                "a5d2f5df63a2148e"
++            ]
++        ]
++    },
++    {
++        "id": "85ba9868d1f3e82c",
++        "type": "inject",
++        "z": "0a211e08511c4bdd",
++        "name": "AT+SF",
++        "props": [
++            {
++                "p": "payload"
++            }
++        ],
++        "repeat": "",
++        "crontab": "",
++        "once": false,
++        "onceDelay": 0.1,
++        "topic": "",
++        "payload": "AT+SF=12,12",
++        "payloadType": "str",
++        "x": 290,
++        "y": 500,
++        "wires": [
++            [
++                "a5d2f5df63a2148e"
++            ]
++        ]
++    },
++    {
++        "id": "144b2749013ffe57",
++        "type": "inject",
++        "z": "0a211e08511c4bdd",
++        "name": "AT+RXMOD",
++        "props": [
++            {
++                "p": "payload"
++            }
++        ],
++        "repeat": "",
++        "crontab": "",
++        "once": false,
++        "onceDelay": 0.1,
++        "topic": "",
++        "payload": "AT+RXMOD=65535,2",
++        "payloadType": "str",
++        "x": 270,
++        "y": 560,
++        "wires": [
++            [
++                "a5d2f5df63a2148e"
++            ]
++        ]
++    },
++    {
++        "id": "bfb2e9df89dc5e2f",
++        "type": "inject",
++        "z": "0a211e08511c4bdd",
++        "name": "AT+SYNCWORD",
++        "props": [
++            {
++                "p": "payload"
++            }
++        ],
++        "repeat": "",
++        "crontab": "",
++        "once": false,
++        "onceDelay": 0.1,
++        "topic": "",
++        "payload": "AT+SYNCWORD=0",
++        "payloadType": "str",
++        "x": 260,
++        "y": 620,
++        "wires": [
++            [
++                "a5d2f5df63a2148e"
++            ]
++        ]
++    },
++    {
++        "id": "d2493fb9752dbcab",
++        "type": "function",
++        "z": "0a211e08511c4bdd",
++        "name": "function 1",
++        "func": "var data = msg.payload\nif (data.substring(0, 4) == \"Data\") {\n    if (data.substring(6, 12) == \"(HEX:)\") {\n        var temp = data.substring(13, 15) + data.substring(16, 18)\n        var hum = data.substring(19, 21) + data.substring(22, 24)\n        var temp1 = parseInt(temp, 16) / 100\n        var hum1 = parseInt(hum, 16) / 10\n        var a1 = { payload: temp1 }, a2 = { payload: hum1 }\n    }\n    if (data.substring(6, 15) == \"(String:)\") {\n        var temp = data.substring(20, 24)\n        var hum = data.substring(29, 34)\n        a1 = { payload: temp }, a2 = { payload: hum }\n    }\n}\nif (data.substring(0, 4) == \"Rssi\") {\n    var rssi = data.substring(6)\n    var a3 = { payload: rssi }\n}\nreturn [a1, a2, a3];",
++        "outputs": 3,
++        "noerr": 0,
++        "initialize": "",
++        "finalize": "",
++        "libs": [],
++        "x": 420,
++        "y": 60,
++        "wires": [
++            [
++                "c17d94be4317ae6c"
++            ],
++            [
++                "20c5b1c7f42fa6bb"
++            ],
++            [
++                "39a8462f3d748eef"
++            ]
++        ]
++    },
++    {
++        "id": "39a8462f3d748eef",
++        "type": "ui_chart",
++        "z": "0a211e08511c4bdd",
++        "name": "",
++        "group": "ef41b39771110fa5",
++        "order": 1,
++        "width": 0,
++        "height": 0,
++        "label": "RSSI",
++        "chartType": "line",
++        "legend": "false",
++        "xformat": "dd HH:mm",
++        "interpolate": "linear",
++        "nodata": "",
++        "dot": true,
++        "ymin": "",
++        "ymax": "",
++        "removeOlder": 1,
++        "removeOlderPoints": "",
++        "removeOlderUnit": "3600",
++        "cutout": 0,
++        "useOneColor": false,
++        "useUTC": false,
++        "colors": [
++            "#1f77b4",
++            "#aec7e8",
++            "#ff7f0e",
++            "#2ca02c",
++            "#98df8a",
++            "#d62728",
++            "#ff9896",
++            "#9467bd",
++            "#c5b0d5"
++        ],
++        "outputs": 1,
++        "useDifferentColor": false,
++        "className": "",
++        "x": 670,
++        "y": 180,
++        "wires": [
++            []
++        ]
++    },
++    {
++        "id": "c17d94be4317ae6c",
++        "type": "ui_chart",
++        "z": "0a211e08511c4bdd",
++        "name": "",
++        "group": "7e1d1c102cf74e6b",
++        "order": 1,
++        "width": 0,
++        "height": 0,
++        "label": "Temperature",
++        "chartType": "line",
++        "legend": "false",
++        "xformat": "HH:mm:ss",
++        "interpolate": "linear",
++        "nodata": "",
++        "dot": true,
++        "ymin": "",
++        "ymax": "",
++        "removeOlder": 1,
++        "removeOlderPoints": "",
++        "removeOlderUnit": "3600",
++        "cutout": 0,
++        "useOneColor": false,
++        "useUTC": false,
++        "colors": [
++            "#1f77b4",
++            "#aec7e8",
++            "#ff7f0e",
++            "#2ca02c",
++            "#98df8a",
++            "#d62728",
++            "#ff9896",
++            "#9467bd",
++            "#c5b0d5"
++        ],
++        "outputs": 1,
++        "useDifferentColor": false,
++        "className": "",
++        "x": 690,
++        "y": 100,
++        "wires": [
++            []
++        ]
++    },
++    {
++        "id": "20c5b1c7f42fa6bb",
++        "type": "ui_chart",
++        "z": "0a211e08511c4bdd",
++        "name": "",
++        "group": "3f5d139f158d7c1c",
++        "order": 2,
++        "width": 0,
++        "height": 0,
++        "label": "Humidity",
++        "chartType": "line",
++        "legend": "false",
++        "xformat": "HH:mm:ss",
++        "interpolate": "linear",
++        "nodata": "",
++        "dot": true,
++        "ymin": "",
++        "ymax": "",
++        "removeOlder": 1,
++        "removeOlderPoints": "",
++        "removeOlderUnit": "3600",
++        "cutout": 0,
++        "useOneColor": false,
++        "useUTC": false,
++        "colors": [
++            "#1f77b4",
++            "#aec7e8",
++            "#ff7f0e",
++            "#2ca02c",
++            "#98df8a",
++            "#d62728",
++            "#ff9896",
++            "#9467bd",
++            "#c5b0d5"
++        ],
++        "outputs": 1,
++        "useDifferentColor": false,
++        "className": "",
++        "x": 680,
++        "y": 140,
++        "wires": [
++            []
++        ]
++    },
++    {
++        "id": "d183c255973c979e",
++        "type": "debug",
++        "z": "0a211e08511c4bdd",
++        "name": "debug 1",
++        "active": true,
++        "tosidebar": true,
++        "console": false,
++        "tostatus": false,
++        "complete": "false",
++        "statusVal": "",
++        "statusType": "auto",
++        "x": 420,
++        "y": 180,
++        "wires": []
++    },
++    {
++        "id": "bb1c0e81fd51fa9e",
++        "type": "serial-port",
++        "serialport": "/dev/ttyUSB0",
++        "serialbaud": "9600",
++        "databits": "8",
++        "parity": "none",
++        "stopbits": "1",
++        "waitfor": "",
++        "dtr": "none",
++        "rts": "none",
++        "cts": "none",
++        "dsr": "none",
++        "newline": "\\n",
++        "bin": "false",
++        "out": "char",
++        "addchar": "\\r\\n",
++        "responsetimeout": "10000"
++    },
++    {
++        "id": "ef41b39771110fa5",
++        "type": "ui_group",
++        "name": "rssi",
++        "tab": "abb98f80600a5448",
++        "order": 3,
++        "disp": true,
++        "width": "6",
++        "collapse": false,
++        "className": ""
++    },
++    {
++        "id": "7e1d1c102cf74e6b",
++        "type": "ui_group",
++        "name": "TEM",
++        "tab": "abb98f80600a5448",
++        "order": 4,
++        "disp": true,
++        "width": "6",
++        "collapse": false,
++        "className": ""
++    },
++    {
++        "id": "3f5d139f158d7c1c",
++        "type": "ui_group",
++        "name": "HUM",
++        "tab": "abb98f80600a5448",
++        "order": 2,
++        "disp": true,
++        "width": "6",
++        "collapse": false,
++        "className": ""
++    },
++    {
++        "id": "abb98f80600a5448",
++        "type": "ui_tab",
++        "name": "LG01v2",
++        "icon": "LG01v2",
++        "disabled": false,
++        "hidden": false
++    }
++]

Log-Temperature-Sensor-and-send-data-to-node-red.json

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+10.1 KB

Content

@@ -1,0 +1,443 @@
++[
++    {
++        "id": "5f10779accc05655",
++        "type": "tab",
++        "label": "serial USB",
++        "disabled": false,
++        "info": "",
++        "env": []
++    },
++    {
++        "id": "4ea60ce4df40717c",
++        "type": "serial in",
++        "z": "5f10779accc05655",
++        "name": "",
++        "serial": "bb1c0e81fd51fa9e",
++        "x": 210,
++        "y": 60,
++        "wires": [
++            [
++                "40eac96a52733f7a",
++                "79722a224bb22c96"
++            ]
++        ]
++    },
++    {
++        "id": "fe5a93a52b6adcf1",
++        "type": "inject",
++        "z": "5f10779accc05655",
++        "name": "AT+SEND=1,hello world,0,3",
++        "props": [
++            {
++                "p": "payload"
++            }
++        ],
++        "repeat": "",
++        "crontab": "",
++        "once": false,
++        "onceDelay": 0.1,
++        "topic": "",
++        "payload": "AT+SEND=1,hello world,0,3",
++        "payloadType": "str",
++        "x": 220,
++        "y": 260,
++        "wires": [
++            [
++                "3f8add7e2e1d1d17"
++            ]
++        ]
++    },
++    {
++        "id": "3f8add7e2e1d1d17",
++        "type": "serial out",
++        "z": "5f10779accc05655",
++        "name": "",
++        "serial": "bb1c0e81fd51fa9e",
++        "x": 540,
++        "y": 260,
++        "wires": []
++    },
++    {
++        "id": "16e7d3d83d9e9415",
++        "type": "inject",
++        "z": "5f10779accc05655",
++        "name": "",
++        "props": [
++            {
++                "p": "payload"
++            }
++        ],
++        "repeat": "",
++        "crontab": "",
++        "once": false,
++        "onceDelay": 0.1,
++        "topic": "",
++        "payload": "ATZ",
++        "payloadType": "str",
++        "x": 290,
++        "y": 320,
++        "wires": [
++            [
++                "3f8add7e2e1d1d17"
++            ]
++        ]
++    },
++    {
++        "id": "09ea381519629dae",
++        "type": "inject",
++        "z": "5f10779accc05655",
++        "name": "AT+FRE",
++        "props": [
++            {
++                "p": "payload"
++            }
++        ],
++        "repeat": "",
++        "crontab": "",
++        "once": false,
++        "onceDelay": 0.1,
++        "topic": "",
++        "payload": "AT+FRE=868.100,868.100",
++        "payloadType": "str",
++        "x": 280,
++        "y": 380,
++        "wires": [
++            [
++                "3f8add7e2e1d1d17"
++            ]
++        ]
++    },
++    {
++        "id": "5167a7f904013ffd",
++        "type": "inject",
++        "z": "5f10779accc05655",
++        "name": "AT+BW",
++        "props": [
++            {
++                "p": "payload"
++            }
++        ],
++        "repeat": "",
++        "crontab": "",
++        "once": false,
++        "onceDelay": 0.1,
++        "topic": "",
++        "payload": "AT+BW=0,0",
++        "payloadType": "str",
++        "x": 290,
++        "y": 440,
++        "wires": [
++            [
++                "3f8add7e2e1d1d17"
++            ]
++        ]
++    },
++    {
++        "id": "dbe4abbc730c76e6",
++        "type": "inject",
++        "z": "5f10779accc05655",
++        "name": "AT+SF",
++        "props": [
++            {
++                "p": "payload"
++            }
++        ],
++        "repeat": "",
++        "crontab": "",
++        "once": false,
++        "onceDelay": 0.1,
++        "topic": "",
++        "payload": "AT+SF=12,12",
++        "payloadType": "str",
++        "x": 290,
++        "y": 500,
++        "wires": [
++            [
++                "3f8add7e2e1d1d17"
++            ]
++        ]
++    },
++    {
++        "id": "3be3ab296a75d512",
++        "type": "inject",
++        "z": "5f10779accc05655",
++        "name": "AT+RXMOD",
++        "props": [
++            {
++                "p": "payload"
++            }
++        ],
++        "repeat": "",
++        "crontab": "",
++        "once": false,
++        "onceDelay": 0.1,
++        "topic": "",
++        "payload": "AT+RXMOD=65535,2",
++        "payloadType": "str",
++        "x": 270,
++        "y": 560,
++        "wires": [
++            [
++                "3f8add7e2e1d1d17"
++            ]
++        ]
++    },
++    {
++        "id": "7a03d1413c60ea1c",
++        "type": "inject",
++        "z": "5f10779accc05655",
++        "name": "AT+SYNCWORD",
++        "props": [
++            {
++                "p": "payload"
++            }
++        ],
++        "repeat": "",
++        "crontab": "",
++        "once": false,
++        "onceDelay": 0.1,
++        "topic": "",
++        "payload": "AT+SYNCWORD=0",
++        "payloadType": "str",
++        "x": 260,
++        "y": 620,
++        "wires": [
++            [
++                "3f8add7e2e1d1d17"
++            ]
++        ]
++    },
++    {
++        "id": "40eac96a52733f7a",
++        "type": "function",
++        "z": "5f10779accc05655",
++        "name": "function 1",
++        "func": "var data = msg.payload\nif (data.substring(0, 4) == \"Data\")\n{\n    if (data.substring(6, 12) == \"(HEX:)\")\n    {\n        var temp = data.substring(13, 15) + data.substring(16, 18)\n        var hum = data.substring(19, 21) + data.substring(22, 24)\n        var temp1 = parseInt(temp, 16)/100\n        var hum1 = parseInt(hum, 16)/10\n        var a1 = { payload: temp1 }, a2 = { payload: hum1 }\n    }\n}\nif (data.substring(0, 4) == \"Rssi\")\n{\n    var rssi = data.substring(6)\n    var a3 = { payload: rssi }\n}\nreturn [a1,a2,a3];\n    \n\n",
++        "outputs": 3,
++        "noerr": 0,
++        "initialize": "",
++        "finalize": "",
++        "libs": [],
++        "x": 420,
++        "y": 60,
++        "wires": [
++            [
++                "81edb003937f1a92"
++            ],
++            [
++                "c63593404a60d9dc"
++            ],
++            [
++                "61ca71032888887b"
++            ]
++        ]
++    },
++    {
++        "id": "61ca71032888887b",
++        "type": "ui_chart",
++        "z": "5f10779accc05655",
++        "name": "",
++        "group": "ef41b39771110fa5",
++        "order": 1,
++        "width": 0,
++        "height": 0,
++        "label": "RSSI",
++        "chartType": "line",
++        "legend": "false",
++        "xformat": "dd HH:mm",
++        "interpolate": "linear",
++        "nodata": "",
++        "dot": true,
++        "ymin": "",
++        "ymax": "",
++        "removeOlder": 1,
++        "removeOlderPoints": "",
++        "removeOlderUnit": "3600",
++        "cutout": 0,
++        "useOneColor": false,
++        "useUTC": false,
++        "colors": [
++            "#1f77b4",
++            "#aec7e8",
++            "#ff7f0e",
++            "#2ca02c",
++            "#98df8a",
++            "#d62728",
++            "#ff9896",
++            "#9467bd",
++            "#c5b0d5"
++        ],
++        "outputs": 1,
++        "useDifferentColor": false,
++        "className": "",
++        "x": 670,
++        "y": 180,
++        "wires": [
++            []
++        ]
++    },
++    {
++        "id": "81edb003937f1a92",
++        "type": "ui_chart",
++        "z": "5f10779accc05655",
++        "name": "",
++        "group": "7e1d1c102cf74e6b",
++        "order": 1,
++        "width": 0,
++        "height": 0,
++        "label": "Temperature",
++        "chartType": "line",
++        "legend": "false",
++        "xformat": "HH:mm:ss",
++        "interpolate": "linear",
++        "nodata": "",
++        "dot": true,
++        "ymin": "",
++        "ymax": "",
++        "removeOlder": 1,
++        "removeOlderPoints": "",
++        "removeOlderUnit": "3600",
++        "cutout": 0,
++        "useOneColor": false,
++        "useUTC": false,
++        "colors": [
++            "#1f77b4",
++            "#aec7e8",
++            "#ff7f0e",
++            "#2ca02c",
++            "#98df8a",
++            "#d62728",
++            "#ff9896",
++            "#9467bd",
++            "#c5b0d5"
++        ],
++        "outputs": 1,
++        "useDifferentColor": false,
++        "className": "",
++        "x": 690,
++        "y": 100,
++        "wires": [
++            []
++        ]
++    },
++    {
++        "id": "c63593404a60d9dc",
++        "type": "ui_chart",
++        "z": "5f10779accc05655",
++        "name": "",
++        "group": "3f5d139f158d7c1c",
++        "order": 2,
++        "width": 0,
++        "height": 0,
++        "label": "Humidity",
++        "chartType": "line",
++        "legend": "false",
++        "xformat": "HH:mm:ss",
++        "interpolate": "linear",
++        "nodata": "",
++        "dot": true,
++        "ymin": "",
++        "ymax": "",
++        "removeOlder": 1,
++        "removeOlderPoints": "",
++        "removeOlderUnit": "3600",
++        "cutout": 0,
++        "useOneColor": false,
++        "useUTC": false,
++        "colors": [
++            "#1f77b4",
++            "#aec7e8",
++            "#ff7f0e",
++            "#2ca02c",
++            "#98df8a",
++            "#d62728",
++            "#ff9896",
++            "#9467bd",
++            "#c5b0d5"
++        ],
++        "outputs": 1,
++        "useDifferentColor": false,
++        "className": "",
++        "x": 680,
++        "y": 140,
++        "wires": [
++            []
++        ]
++    },
++    {
++        "id": "79722a224bb22c96",
++        "type": "debug",
++        "z": "5f10779accc05655",
++        "name": "debug 1",
++        "active": true,
++        "tosidebar": true,
++        "console": false,
++        "tostatus": false,
++        "complete": "false",
++        "statusVal": "",
++        "statusType": "auto",
++        "x": 420,
++        "y": 180,
++        "wires": []
++    },
++    {
++        "id": "bb1c0e81fd51fa9e",
++        "type": "serial-port",
++        "serialport": "/dev/ttyUSB0",
++        "serialbaud": "9600",
++        "databits": "8",
++        "parity": "none",
++        "stopbits": "1",
++        "waitfor": "",
++        "dtr": "none",
++        "rts": "none",
++        "cts": "none",
++        "dsr": "none",
++        "newline": "\\n",
++        "bin": "false",
++        "out": "char",
++        "addchar": "\\r\\n",
++        "responsetimeout": "10000"
++    },
++    {
++        "id": "ef41b39771110fa5",
++        "type": "ui_group",
++        "name": "rssi",
++        "tab": "abb98f80600a5448",
++        "order": 3,
++        "disp": true,
++        "width": "6",
++        "collapse": false,
++        "className": ""
++    },
++    {
++        "id": "7e1d1c102cf74e6b",
++        "type": "ui_group",
++        "name": "TEM",
++        "tab": "abb98f80600a5448",
++        "order": 4,
++        "disp": true,
++        "width": "6",
++        "collapse": false,
++        "className": ""
++    },
++    {
++        "id": "3f5d139f158d7c1c",
++        "type": "ui_group",
++        "name": "HUM",
++        "tab": "abb98f80600a5448",
++        "order": 2,
++        "disp": true,
++        "width": "6",
++        "collapse": false,
++        "className": ""
++    },
++    {
++        "id": "abb98f80600a5448",
++        "type": "ui_tab",
++        "name": "LG01v2",
++        "icon": "LG01v2",
++        "disabled": false,
++        "hidden": false
++    }
++]

image-20221108172432-7.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+45.9 KB

Content

image-20221108174840-8.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+52.1 KB

Content

image-20221108175113-9.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+72.6 KB

Content

image-20221108180334-10.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+159.3 KB

Content

image-20221108180458-11.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+52.4 KB

Content

image-20221112161031-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+35.1 KB

Content

image-20221112161111-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+34.8 KB

Content

image-20221112162733-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+78.7 KB

Content

image-20221112163119-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+32.6 KB

Content

Changes for page LG01v2 -- LoRa Gateway User Manual

Summary

Details

Applications

Navigation