Changes for page LG01v2 -- LoRa Gateway User Manual
Last modified by Kilight Cao on 2024/10/12 08:58
Change comment:
Uploaded new attachment "image-20221112162733-3.png", version {1}
Summary
-
Page properties (1 modified, 0 added, 0 removed)
-
Attachments (0 modified, 52 added, 0 removed)
- 1667456058832-484.png
- LoRa_Shield_Sketch_For_MQTT.ino
- Log-Temperature-Sensor-and-send-data-to-Node-red.ino
- Log-Temperature-Sensor-and-send-data-to-node-red.json
- arduino-LoRa-master.zip
- image-20221029172156-1.png
- image-20221029174637-2.png
- image-20221029174703-3.png
- image-20221031091550-1.png
- image-20221031091652-2.png
- image-20221031091807-3.png
- image-20221031092053-4.png
- image-20221101160705-1.png
- image-20221101161318-2.png
- image-20221101161951-3.png
- image-20221101162527-4.png
- image-20221102105419-1.png
- image-20221102110604-2.png
- image-20221102114002-3.png
- image-20221102140053-4.png
- image-20221103140645-1.png
- image-20221103142228-2.png
- image-20221103142416-3.png
- image-20221103143528-4.png
- image-20221103143618-5.png
- image-20221103144405-6.png
- image-20221103152033-7.png
- image-20221103152238-8.png
- image-20221104100344-1.png
- image-20221104100520-2.png
- image-20221104102736-3.png
- image-20221104155612-1.png
- image-20221104155654-2.png
- image-20221104155724-3.png
- image-20221104155907-4.png
- image-20221104155928-5.png
- image-20221104155949-6.png
- image-20221108164337-1.png
- image-20221108164413-2.png
- image-20221108170314-3.png
- image-20221108170621-4.jpeg
- image-20221108170731-5.png
- image-20221108172149-6.png
- image-20221108172432-7.png
- image-20221108174840-8.png
- image-20221108175113-9.png
- image-20221108180334-10.png
- image-20221108180458-11.png
- image-20221112161031-1.png
- image-20221112161111-2.png
- image-20221112162733-3.png
- serial USB.json
Details
- Page properties
-
- Content
-
... ... @@ -14,17 +14,16 @@ 14 14 = **1. Introduction** = 15 15 16 16 17 +== **1.1 What is LG01-V2** == 17 17 18 -== **1.1 What is LG01v2** == 19 19 20 - 21 21 ((( 22 22 ((( 23 -The LG01 v2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.22 +The LG01-V2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates. 24 24 ))) 25 25 26 26 ((( 27 -LG01 v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.26 +LG01-V2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it. 28 28 ))) 29 29 30 30 ... ... @@ -49,8 +49,6 @@ 49 49 * Storage Temperature: -20 ~~ 65°C 50 50 * Power Input: 5V, 2A, DC 51 51 52 - 53 - 54 54 == **1.3 Features** == 55 55 56 56 ... ... @@ -62,22 +62,521 @@ 62 62 * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server 63 63 * Built-in (% style="color:#037691" %)//**Node-Red**// (%%)local Application server 64 64 62 +== **1.4 Block Diagram** == 65 65 66 66 67 -== **1.4 Block Diagram** == 68 68 66 +== **1.5 LED Indicators** == 69 69 70 70 69 +LG01-V2 has totally four LEDs, They are: 71 71 72 72 72 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered// 73 73 74 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This RGB LED will blink GREEN when the ETH port is connecting// 74 74 76 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~:// 75 75 78 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.// 76 76 80 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together// 77 77 82 +// ✓** SOLID RED:** Device doesn't have an Internet connection.// 78 78 84 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.// 79 79 80 80 81 81 88 +== **1.6 Button Intruction** == 89 + 90 + 91 +LG01-V2 has a black toggle button, which is: 92 + 93 + 94 +(% style="color:blue" %)**//➢ //Long press 4-5s : **(%%)the gateway will reload the Network and Initialize wifi configuration 95 + 96 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.// 97 + 98 + 99 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)** **//the gateway will restore the factory settings.// 100 + 101 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.// 102 + 103 + 104 + 105 += **2. Quick Start** = 106 + 107 + 108 +The LG01-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network. 109 + 110 +In most cases, the first thing you need to do is make the LG01-v2 accessible to the network. 111 + 112 + 113 +== **2.1 Connects to the network and accesses the gateway Web UI** == 114 + 115 + 116 +== **2.1.1 connect the network.** == 117 + 118 + 119 +=== (% style="color:blue" %)**Method 1**(%%): Connect via Ethernet with DHCP IP from the router === 120 + 121 + 122 +Connect the LG01-V2 Ethernet port to your router and LG01-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01-V2. 123 + 124 +You can also use this IP to connect. 125 + 126 + 127 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100129-1.png?width=1263&height=332&rev=1.1||alt="image-20220622100129-1.png"]] 128 + 129 + 130 +=== (% style="color:blue" %)**Method 2**(%%): Connect via WiFi with DHCP IP from the router === 131 + 132 + 133 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100542-2.png?width=1256&height=369&rev=1.1||alt="image-20220622100542-2.png"]] 134 + 135 + 136 +Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply** 137 + 138 + 139 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102702-6.png?rev=1.1||alt="image-20220622102702-6.png"]] 140 + 141 + 142 +**Wi-Fi configuration successful** 143 + 144 + 145 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102847-7.png?rev=1.1||alt="image-20220622102847-7.png"]] 146 + 147 + 148 + 149 += **3. Web Configure Pages** = 150 + 151 +== **3.1 Home** == 152 + 153 +//Shows the system running status~:// 154 + 155 +[[image:image-20221104155612-1.png||height="497" width="942"]] 156 + 157 + 158 +== **3.2 Network Settings** == 159 + 160 + 161 +=== **3.2.1 Network ~-~-> WiFi** === 162 + 163 + 164 +[[image:image-20221104155654-2.png||height="319" width="813"]] 165 + 166 + 167 + 168 +=== **3.4.2 Network ~-~-> System Status** === 169 + 170 + 171 +[[image:image-20221104155724-3.png||height="679" width="861"]] 172 + 173 + 174 + 175 +=== **3.4.3 Network ~-~-> Firewall** === 176 + 177 + 178 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616115351-6.png?width=661&height=244&rev=1.1||alt="image-20220616115351-6.png"]] 179 + 180 + 181 + 182 +== **3.5 System** == 183 + 184 + 185 +=== **3.5.1 System ~-~-> System Overview** === 186 + 187 + 188 +Shows the system info: 189 + 190 +[[image:image-20221104155907-4.png]] 191 + 192 + 193 + 194 +=== **3.5.2 System ~-~-> Backup/Restore** === 195 + 196 + 197 +[[image:image-20221104155928-5.png||height="334" width="880"]] 198 + 199 + 200 += (% id="cke_bm_1978S" style="display:none" %)** **(%%)**4. Build in Server** = 201 + 202 + 203 +The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red** 204 + 205 + 206 +[[image:image-20221104155949-6.png||height="315" width="1023"]] 207 + 208 + 209 +(% style="color:red" %)**Note:** 210 + 211 + **Path**: System ~-~-> Built-in Server 212 + 213 + 214 +**Troubleshooting:** 215 + 216 + 217 +**~ 1. URL does not jump properly** 218 + 219 + For the Node-Red, you can use the local IP address and the port is 1880 to access it. 220 + 221 + 222 + 223 +== **4.1 Application Server ~-~- Node-Red** == 224 + 225 + 226 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser. 227 + 228 + 229 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880 or http:~/~/<Local-IPV4-Address>//**__ 230 + 231 + 232 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]] 233 + 234 + 235 += **5. How to configure the Lora Gateway** = 236 + 237 + 238 +== **5.1 Access the Lora configuration page** == 239 + 240 + 241 +Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**: 242 + 243 +(% class="box infomessage" %) 244 +((( 245 +**root@dragino-2406ef:~~# minicom -s** 246 +))) 247 + 248 +[[image:image-20221029174637-2.png||height="410" width="524"]] 249 + 250 + 251 +And then, change the setting: 252 + 253 +(% class="box infomessage" %) 254 +((( 255 +**Serial Device :** **/dev/ttyUSB0** 256 + 257 +**Bps/Par/Bits : 9600 8N1** 258 +))) 259 + 260 + 261 +(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**(%%) 262 +(% style="color:red" %)[[image:image-20221029174703-3.png]] 263 + 264 + 265 +Enter **AT+CFG **in the interface to get the configuration, 266 + 267 + 268 +(% class="box infomessage" %) 269 +((( 270 +AT+FRE=868.100,868.100 ~-~--> TX and RX frequency 271 +AT+GROUPMOD=0,0 ~-~--> TX and RX group 272 +AT+BW=0,0 ~-~--> TX and RX Bandwidth 273 +AT+SF=12,12 ~-~--> TX and RX Spreading Factor 274 +AT+POWER=14 ~-~--> TX Power Range 275 +AT+CRC=1,1 ~-~--> TX and RX CRC Type 276 +AT+HEADER=0,0 ~-~--> TX and RX Header Type 277 +AT+CR=1,1 ~-~--> TX and RX Coding Rate 278 +AT+IQ=0,0 ~-~--> TX and RX InvertIQ 279 +AT+PREAMBLE=8,8 ~-~--> TX and RX Preamble Length 280 +AT+SYNCWORD=0 ~-~--> Syncword**(0: private,1: public)** 281 +AT+RXMOD=65535,0 ~-~--> Rx Timeout and Reply mode 282 +AT+RXDAFORM=1 283 +))) 284 + 285 + 286 +== **5.2 Example: LG01**-**V2 Peer-to-Peer** == 287 + 288 + 289 +[[image:image-20221104102736-3.png||height="282" width="723"]] 290 + 291 + 292 +The user can run the AT command to set the LG01-V2 RX window always open as a Receiver, The LG01-V2 can display the received data in the built-in server Node-Red, Here are the specific steps: 293 + 294 +(% style="color:red" %)**Prerequisites: **(%%)The configuration of LG01-V2 and LA66 Shield must match and the LA66 Shield firmware is **[[LA66 Peer-to-Peer firmware>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]**, users can use **AT+CFG** to check all configurations. 295 + 296 + 297 +=== **Log Temperature Sensor(DHT11) and send data to LG01-V2, show it in Node-RED.** === 298 + 299 + 300 +(% style="color:red; font-weight:bold" %)**LG01-V**(% style="color:red" %)**2 as Receiver: (configured as AT+RXMOD=65535,2)** 301 + 302 +(% class="box infomessage" %) 303 +((( 304 +**LG01-V2 configuration:** 305 + 306 +AT+FRE=868.100,868.100 ~-~--> TX and RX frequency set: 868100000 307 +AT+BW=0,0 ~-~--> TX and RX Bandwidth set: 125kHz 308 +AT+SF=12,12 ~-~--> TX and RX Spreading Factor set: SF12 309 +AT+POWER=14 ~-~--> TX Power Range set: 14dBm 310 +AT+CRC=1,1 ~-~--> TX and RX CRC Type 311 +AT+HEADER=0,0 ~-~--> TX and RX Header Type 312 +AT+CR=1,1 ~-~--> TX and RX Coding Rate 313 +AT+IQ=0,0 ~-~--> TX and RX InvertIQ 314 +AT+PREAMBLE=8,8 ~-~--> TX and RX Preamble Length set: 8 315 +AT+SYNCWORD=0 ~-~--> Syncword**(0: private,1: public)** 316 +AT+RXMOD=65535,0 ~-~--> Rx Timeout and Reply mode, RX window always open 317 +))) 318 + 319 + 320 +(% style="color:red" %)**LA66 Shield as Sender: ** 321 + 322 +(% class="box infomessage" %) 323 +((( 324 +**LA66 Shield configuration:** 325 + 326 +AT+FRE=868.100,868.100 ~-~--> TX and RX frequency set: 868100000 327 +AT+BW=0,0 ~-~--> TX and RX Bandwidth set: 125kHz 328 +AT+SF=12,12 ~-~--> TX and RX Spreading Factor set: SF12 329 +AT+POWER=14 ~-~--> TX Power Range set: 14dBm 330 +AT+CRC=1,1 ~-~--> TX and RX CRC Type 331 +AT+HEADER=0,0 ~-~--> TX and RX Header Type 332 +AT+CR=1,1 ~-~--> TX and RX Coding Rate 333 +AT+IQ=0,0 ~-~--> TX and RX InvertIQ 334 +AT+PREAMBLE=8,8 ~-~--> TX and RX Preamble Length set: 8 335 +AT+SYNCWORD=0 ~-~--> Syncword**(0: private,1: public)** 336 +AT+RXMOD=6,0 ~-~--> Rx Timeout and Reply mode 337 +))) 338 +))) 339 + 340 + 341 +After the above configuration is complete, users can send test simulation data to check whether the configuration is correct, In LA66 sheild serial console send:(% style="color:red" %)**(AT+SEND=1,hello world,2,3).** 342 + 343 +When LG01-V2 replies with ACK when it receives a packet sent by LA66 sheild. 344 + 345 +[[image:image-20221108164413-2.png]] 346 + 347 + 348 +In the real-time log of LG01-V2: 349 + 350 +[[image:image-20221108170314-3.png]] 351 + 352 + 353 +**Hardware Connection** 354 + 355 +(% class="box infomessage" %) 356 +((( 357 +**The DHT11 sensor connects to the LA66 Shield:** 358 + 359 +**VCC <~-~--> 3.3V (Red line)** 360 +**DATA <~-~--> PIN8 (Purple line)** 361 +**GND <~-~--> GND (White line)** 362 +))) 363 + 364 +[[image:image-20221108170731-5.png||height="588" width="441"]] 365 + 366 + 367 +==== **1. Open Arduino IDE** ==== 368 + 369 +[[image:image-20221108172149-6.png||height="650" width="542"]] 370 + 371 + 372 +==== **2. Open project** ==== 373 + 374 + 375 +Users can download Arduino files from this link: [[attach:Log-Temperature-Sensor-and-send-data-to-Node-red.ino||target="_blank"]] 376 + 377 +Then click Compile and Upload to LA66 Shield, 378 + 379 +[[image:image-20221108172432-7.png]] 380 + 381 + 382 +==== **3. Open the Serial Monitor to check the LA66 Shield data** ==== 383 + 384 + 385 +The LA66 Shield reads the temperature and humidity data from the sensor and sends it to LG01-V2, 386 + 387 +[[image:image-20221108174840-8.png||height="731" width="671"]] 388 + 389 +[[image:image-20221108175113-9.png||height="556" width="998"]] 390 + 391 + 392 +==== **4. Import the flow to the built-in server on LG01-V2** ==== 393 + 394 + 395 +Users can import this example in Node-Red: [[attach:Log-Temperature-Sensor-and-send-data-to-node-red.json||target="_blank"]] 396 + 397 +[[image:image-20221108180334-10.png||height="651" width="1141"]] 398 + 399 + 400 +The temperature and humidity chart is displayed in the built-in node-red UI 401 + 402 +**Browser input: (% style="background-color:yellow" %)__//http:~/~/<local-IPV4-address>//__(%%)** 403 + 404 +[[image:image-20221108180458-11.png||height="402" width="1137"]] 405 + 406 + 407 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**-V(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** = 408 + 409 + 410 +(% style="color:blue" %)**USB TTL to LG01-V2 Connection:** 411 + 412 + 413 +Port 1 of the UART on the LG01-V2 is GND 414 + 415 +(% class="box infomessage" %) 416 +((( 417 +**TXD <~-~--> UART RXD (Gray line)** 418 + 419 +**RXD <~-~--> UART TXD (White line)** 420 + 421 +**GND <~-~--> GND (Black line)** 422 +))) 423 + 424 + 425 +**LG01-V2 UART connection photo** 426 + 427 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]] 428 + 429 + 430 + 431 +In the PC, you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LG01v2. LG01v2 will output system info once power on as below: 432 + 433 + 434 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]] 435 + 436 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]] 437 + 438 + 439 += **7. FAQ** = 440 + 441 + 442 +== **7.1 How does LG01-V2 communicate with Lora shield (LoRa.h)** == 443 + 444 + 445 +This example describes how to use LG01-V2, LoRa Shield to set up a LoRa network 446 + 447 +[[image:image-20221103152238-8.png||height="251" width="654"]] 448 + 449 + 450 +(% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match** 451 + 452 +**LG01-V2 configuration:** 453 + 454 +(% class="box infomessage" %) 455 +((( 456 +AT+FRE=868.100,868.100 ~-~--> TX and RX frequency set: 868100000 457 +AT+BW=0,0 ~-~--> TX and RX Bandwidth set: 125kHz 458 +AT+SF=12,12 ~-~--> TX and RX Spreading Factor set: SF12 459 +AT+POWER=14 ~-~--> TX Power Range 460 +AT+CRC=1,1 ~-~--> TX and RX CRC Type 461 +AT+HEADER=0,0 ~-~--> TX and RX Header Type 462 +AT+CR=1,1 ~-~--> TX and RX Coding Rate 463 +AT+IQ=0,0 ~-~--> TX and RX InvertIQ 464 +AT+PREAMBLE=8,8 ~-~--> TX and RX Preamble Length set: 8 465 +AT+SYNCWORD=0 ~-~--> Syncword**(0: private,1: public), **the corresponding Lora shield syncword is 0x12 466 +AT+RXMOD=65535,0 ~-~--> Rx Timeout and Reply mode,RX window always open 467 +AT+RXDAFORM=1 468 +))) 469 + 470 +**Lora shield configuration:** 471 + 472 +Lora Shield example: [[attach:LoRa_Shield_Sketch_For_MQTT.ino||target="_blank"]] , [[attach:arduino-LoRa-master.zip||target="_blank"]] 473 + 474 +[[image:image-20221101161318-2.png]] 475 + 476 + 477 +**Test LG01-V2 to receive Lora Shield data:** 478 + 479 +[[image:image-20221101161951-3.png]] 480 + 481 + 482 +**Test the LG01-V2 to send data:** 483 + 484 +[[image:image-20221101162527-4.png]] 485 + 486 + 487 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) = 488 + 489 + 490 +((( 491 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//** 492 +))) 493 + 494 +((( 495 +**//With your question as detailed as possible. We will reply and help you in the shortest.//** 496 + 497 + 498 + 499 += **9. Reference** = 500 + 501 + 502 +* Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]]. 503 +* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]]. 504 + 82 82 83 83 ))) 507 + 508 += **10. Order Info** = 509 + 510 + 511 +(% style="color:#0000ff" %)**LPS8v2-XXX-YYY** 512 + 513 +(% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band 514 + 515 +* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band 516 +* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band 517 +* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band 518 +* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band 519 +* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band 520 +* (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band 521 + 522 +(% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option 523 + 524 +* (% style="color:red" %)**E**(%%): EMEA, Korea, Thailand, India. 525 +* (% style="color:red" %)**A**(%%): North America/ Rogers/AT&T/T-Mobile. 526 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan 527 +* (% style="color:red" %)**J**(%%): Japan, DOCOMO/SoftBank/ KDDI 528 + 529 +More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]]. 530 + 531 + 532 + 533 += **10. Manufacturer Info** = 534 + 535 + 536 +**Shenzhen Dragino Technology Development co. LTD** 537 + 538 +Room 202, Block B, BCT Incubation Bases (BaoChengTai), No.8 CaiYunRoad 539 + 540 +LongCheng Street, LongGang District ; Shenzhen 518116,China 541 + 542 + 543 + 544 += **11. FCC Warning** = 545 + 546 + 547 +((( 548 +This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 549 +))) 550 + 551 +((( 552 +~-~- Reorient or relocate the receiving antenna. 553 +))) 554 + 555 +((( 556 +~-~- Increase the separation between the equipment and receiver. 557 +))) 558 + 559 +((( 560 +~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 561 +))) 562 + 563 +((( 564 +~-~- Consult the dealer or an experienced radio/TV technician for help. 565 +))) 566 + 567 + 568 +((( 569 +Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 570 +))) 571 + 572 + 573 +((( 574 +The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. 575 + 576 + 577 +))) 578 + 579 +~)~)~)
- 1667456058832-484.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +21.0 KB - Content
- LoRa_Shield_Sketch_For_MQTT.ino
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +2.9 KB - Content
-
... ... @@ -1,0 +1,118 @@ 1 +#include <SPI.h> 2 +#include <LoRa.h> 3 + 4 +// This is the LoRa Node side sketch for the MQTT example: http://wiki.dragino.com/index.php?title=MQTT_Forward_Instruction#Example_to_communicate_to_a_simple_MQTT_server 5 + 6 +float tem,hum; 7 +char tem_1[8]={"\0"},hum_1[8]={"\0"}; 8 +char *node_id = "<4567>"; //From LG01 via web Local Channel settings on MQTT.Please refer <> dataformat in here. 9 +uint8_t datasend[36]; 10 +unsigned int count = 1; 11 +unsigned long new_time,old_time=0; 12 + 13 +void setup() 14 +{ 15 + Serial.begin(9600); 16 + while (!Serial); 17 + Serial.println(F("Start MQTT Example")); 18 + if (!LoRa.begin(868100000)) //868000000 is frequency 19 + { 20 + Serial.println("Starting LoRa failed!"); 21 + while (1); 22 + } 23 + // Setup Spreading Factor (6 ~ 12) 24 + LoRa.setSpreadingFactor(12); 25 + 26 + // Setup BandWidth, option: 7800,10400,15600,20800,31250,41700,62500,125000,250000,500000 27 + //Lower BandWidth for longer distance. 28 + LoRa.setSignalBandwidth(125000); 29 + 30 + // Setup Coding Rate:5(4/5),6(4/6),7(4/7),8(4/8) 31 + LoRa.setCodingRate4(5); 32 + LoRa.setSyncWord(0x12); 33 + void disableCrc(); 34 + LoRa.disableInvertIQ(); 35 + LoRa.explicitHeaderMode(); 36 + Serial.println("LoRa init succeeded."); 37 + LoRa.onReceive(onReceive); 38 + LoRa.receive(); 39 +} 40 + 41 +void dhtTem() 42 +{ 43 + tem = random(15,40); 44 + hum = random(40,80); 45 + Serial.println(F("The temperature and humidity:")); 46 + Serial.print("["); 47 + Serial.print(tem); 48 + Serial.print("℃"); 49 + Serial.print(","); 50 + Serial.print(hum); 51 + Serial.print("%"); 52 + Serial.print("]"); 53 + Serial.println(""); 54 +} 55 +void dhtWrite() 56 +{ 57 + char data[50] = "\0"; 58 + //for(int i = 0; i < 50; i++) 59 + //{ 60 + // data[i] = node_id[i]; 61 + //} 62 + 63 + dtostrf(tem,0,1,tem_1); 64 + dtostrf(hum,0,1,hum_1); 65 + 66 + // Serial.println(tem_1); 67 + strcat(data,"tem="); 68 + strcat(data,tem_1); 69 + strcat(data,"&hum="); 70 + strcat(data,hum_1); 71 + strcpy((char *)datasend,data); 72 + 73 + //Serial.println((char *)datasend); 74 + //Serial.println(sizeof datasend); 75 + 76 +} 77 + 78 + 79 +void SendData() 80 +{ 81 + LoRa.beginPacket(); 82 + LoRa.print((char *)datasend); 83 + LoRa.endPacket(); 84 + Serial.println("Packet Sent"); 85 +} 86 + 87 + 88 + 89 +void loop() 90 +{ 91 + new_time=millis(); 92 + if (new_time - old_time >= 30000 || old_time == 0) 93 + { 94 + old_time = new_time; 95 + Serial.print("########### "); 96 + Serial.print("COUNT="); 97 + Serial.print(count); 98 + Serial.println(" ###########"); 99 + count++; 100 + dhtTem(); 101 + dhtWrite(); 102 + SendData(); 103 + LoRa.receive(); 104 + } 105 +} 106 + 107 +void onReceive(int packetSize) { 108 + 109 + // received a packet 110 + Serial.print("Received packet : "); 111 + 112 + // read packet 113 + for (int i = 0; i < packetSize; i++) { 114 + Serial.print((char)LoRa.read()); 115 + } 116 + Serial.print("\n\r"); 117 +} 118 +
- Log-Temperature-Sensor-and-send-data-to-Node-red.ino
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +3.6 KB - Content
-
... ... @@ -1,0 +1,150 @@ 1 +#include <SoftwareSerial.h> 2 +#include <Adafruit_Sensor.h> 3 +#include <DHT.h> 4 +#include <DHT_U.h> 5 +/* 6 + 7 +*/ 8 +#define DHTPIN 8 // Digital pin connected to the DHT sensor 9 +#define DHTTYPE DHT11 // DHT 11 10 +DHT_Unified dht(DHTPIN, DHTTYPE); 11 + 12 +String inputString = ""; // a String to hold incoming data 13 +bool stringComplete = false; // whether the string is complete 14 + 15 +long old_time=millis(); 16 +long new_time; 17 + 18 +long uplink_interval=30000; //ms 19 + 20 +float DHT11_temp; 21 +float DHT11_hum; 22 + 23 +SoftwareSerial ss(10, 11); // Arduino RX, TX , 24 + 25 +char rxbuff[128]; 26 +uint8_t rxbuff_index=0; 27 + 28 +void setup() { 29 + // initialize serial 30 + Serial.begin(9600); 31 + 32 + ss.begin(9600); 33 + ss.listen(); 34 + 35 + // reserve 200 bytes for the inputString: 36 + inputString.reserve(200); 37 + 38 + dht.begin(); 39 + sensor_t sensor; 40 + dht.temperature().getSensor(&sensor); 41 + dht.humidity().getSensor(&sensor); 42 + 43 + ss.println("ATZ");//reset LA66 44 +} 45 + 46 +void loop() { 47 + 48 + while ( ss.available()) { 49 + // get the new byte: 50 + char inChar = (char) ss.read(); 51 + // add it to the inputString: 52 + inputString += inChar; 53 + 54 + rxbuff[rxbuff_index++]=inChar; 55 + 56 + if(rxbuff_index>128) 57 + { 58 + rxbuff[rxbuff_index]='\0'; 59 + rxbuff_index=0; 60 + break; 61 + } 62 + 63 + // if the incoming character is a newline, set a flag so the main loop can 64 + // do something about it: 65 + if (inChar == '\n' || inChar == '\r') { 66 + stringComplete = true; 67 + rxbuff[rxbuff_index]='\0'; 68 + rxbuff_index=0; 69 + } 70 + } 71 + 72 + while ( Serial.available()) { 73 + // get the new byte: 74 + char inChar = (char) Serial.read(); 75 + // add it to the inputString: 76 + inputString += inChar; 77 + // if the incoming character is a newline, set a flag so the main loop can 78 + // do something about it: 79 + if (inChar == '\n' || inChar == '\r') { 80 + ss.print(inputString); 81 + inputString = "\0"; 82 + } 83 + } 84 + 85 + // print the string when a newline arrives: 86 + if (stringComplete) { 87 + Serial.print(inputString); 88 + 89 + // clear the string: 90 + inputString = "\0"; 91 + stringComplete = false; 92 + } 93 + 94 + new_time = millis(); 95 + 96 + if(new_time-old_time>=uplink_interval){ 97 + old_time = new_time; 98 + 99 + Serial.print(F("\r\n")); 100 + // Get temperature event and print its value. 101 + sensors_event_t event; 102 + dht.temperature().getEvent(&event); 103 + if (isnan(event.temperature)) { 104 + Serial.println(F("Error reading temperature!")); 105 + DHT11_temp=327.67; 106 + } 107 + else { 108 + DHT11_temp=event.temperature; 109 + 110 + if(DHT11_temp>60){ 111 + DHT11_temp=60; 112 + } 113 + else if(DHT11_temp<-20){ 114 + DHT11_temp=-20; 115 + } 116 + } 117 + // Get humidity event and print its value. 118 + dht.humidity().getEvent(&event); 119 + if (isnan(event.relative_humidity)) { 120 + DHT11_hum=327.67; 121 + Serial.println(F("Error reading humidity!")); 122 + } 123 + else { 124 + DHT11_hum=event.relative_humidity; 125 + 126 + if(DHT11_hum>100){ 127 + DHT11_hum=100; 128 + } 129 + else if(DHT11_hum<0){ 130 + DHT11_hum=0; 131 + } 132 + } 133 + 134 + Serial.print(F("Temperature: ")); 135 + Serial.print(DHT11_temp); 136 + Serial.println(F("°C")); 137 + Serial.print(F("Humidity: ")); 138 + Serial.print(DHT11_hum); 139 + Serial.println(F("%")); 140 + Serial.print(F("\r\n")); 141 + 142 + char sensor_data_buff[128]="\0"; 143 + 144 + //confirm status,Fport,payload length,payload(HEX) 145 + snprintf(sensor_data_buff,128,"AT+SEND=0,%02X%02X%02X%02X,0,0",(short)(DHT11_temp*100)>>8 & 0xFF,(short)(DHT11_temp*100) & 0xFF,(short)(DHT11_hum*10)>>8 & 0xFF,(short)(DHT11_hum*10) & 0xFF); 146 + ss.print(sensor_data_buff); 147 + ss.print('\r'); 148 + } 149 +} 150 +
- Log-Temperature-Sensor-and-send-data-to-node-red.json
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +10.1 KB - Content
-
... ... @@ -1,0 +1,443 @@ 1 +[ 2 + { 3 + "id": "5f10779accc05655", 4 + "type": "tab", 5 + "label": "serial USB", 6 + "disabled": false, 7 + "info": "", 8 + "env": [] 9 + }, 10 + { 11 + "id": "4ea60ce4df40717c", 12 + "type": "serial in", 13 + "z": "5f10779accc05655", 14 + "name": "", 15 + "serial": "bb1c0e81fd51fa9e", 16 + "x": 210, 17 + "y": 60, 18 + "wires": [ 19 + [ 20 + "40eac96a52733f7a", 21 + "79722a224bb22c96" 22 + ] 23 + ] 24 + }, 25 + { 26 + "id": "fe5a93a52b6adcf1", 27 + "type": "inject", 28 + "z": "5f10779accc05655", 29 + "name": "AT+SEND=1,hello world,0,3", 30 + "props": [ 31 + { 32 + "p": "payload" 33 + } 34 + ], 35 + "repeat": "", 36 + "crontab": "", 37 + "once": false, 38 + "onceDelay": 0.1, 39 + "topic": "", 40 + "payload": "AT+SEND=1,hello world,0,3", 41 + "payloadType": "str", 42 + "x": 220, 43 + "y": 260, 44 + "wires": [ 45 + [ 46 + "3f8add7e2e1d1d17" 47 + ] 48 + ] 49 + }, 50 + { 51 + "id": "3f8add7e2e1d1d17", 52 + "type": "serial out", 53 + "z": "5f10779accc05655", 54 + "name": "", 55 + "serial": "bb1c0e81fd51fa9e", 56 + "x": 540, 57 + "y": 260, 58 + "wires": [] 59 + }, 60 + { 61 + "id": "16e7d3d83d9e9415", 62 + "type": "inject", 63 + "z": "5f10779accc05655", 64 + "name": "", 65 + "props": [ 66 + { 67 + "p": "payload" 68 + } 69 + ], 70 + "repeat": "", 71 + "crontab": "", 72 + "once": false, 73 + "onceDelay": 0.1, 74 + "topic": "", 75 + "payload": "ATZ", 76 + "payloadType": "str", 77 + "x": 290, 78 + "y": 320, 79 + "wires": [ 80 + [ 81 + "3f8add7e2e1d1d17" 82 + ] 83 + ] 84 + }, 85 + { 86 + "id": "09ea381519629dae", 87 + "type": "inject", 88 + "z": "5f10779accc05655", 89 + "name": "AT+FRE", 90 + "props": [ 91 + { 92 + "p": "payload" 93 + } 94 + ], 95 + "repeat": "", 96 + "crontab": "", 97 + "once": false, 98 + "onceDelay": 0.1, 99 + "topic": "", 100 + "payload": "AT+FRE=868.100,868.100", 101 + "payloadType": "str", 102 + "x": 280, 103 + "y": 380, 104 + "wires": [ 105 + [ 106 + "3f8add7e2e1d1d17" 107 + ] 108 + ] 109 + }, 110 + { 111 + "id": "5167a7f904013ffd", 112 + "type": "inject", 113 + "z": "5f10779accc05655", 114 + "name": "AT+BW", 115 + "props": [ 116 + { 117 + "p": "payload" 118 + } 119 + ], 120 + "repeat": "", 121 + "crontab": "", 122 + "once": false, 123 + "onceDelay": 0.1, 124 + "topic": "", 125 + "payload": "AT+BW=0,0", 126 + "payloadType": "str", 127 + "x": 290, 128 + "y": 440, 129 + "wires": [ 130 + [ 131 + "3f8add7e2e1d1d17" 132 + ] 133 + ] 134 + }, 135 + { 136 + "id": "dbe4abbc730c76e6", 137 + "type": "inject", 138 + "z": "5f10779accc05655", 139 + "name": "AT+SF", 140 + "props": [ 141 + { 142 + "p": "payload" 143 + } 144 + ], 145 + "repeat": "", 146 + "crontab": "", 147 + "once": false, 148 + "onceDelay": 0.1, 149 + "topic": "", 150 + "payload": "AT+SF=12,12", 151 + "payloadType": "str", 152 + "x": 290, 153 + "y": 500, 154 + "wires": [ 155 + [ 156 + "3f8add7e2e1d1d17" 157 + ] 158 + ] 159 + }, 160 + { 161 + "id": "3be3ab296a75d512", 162 + "type": "inject", 163 + "z": "5f10779accc05655", 164 + "name": "AT+RXMOD", 165 + "props": [ 166 + { 167 + "p": "payload" 168 + } 169 + ], 170 + "repeat": "", 171 + "crontab": "", 172 + "once": false, 173 + "onceDelay": 0.1, 174 + "topic": "", 175 + "payload": "AT+RXMOD=65535,2", 176 + "payloadType": "str", 177 + "x": 270, 178 + "y": 560, 179 + "wires": [ 180 + [ 181 + "3f8add7e2e1d1d17" 182 + ] 183 + ] 184 + }, 185 + { 186 + "id": "7a03d1413c60ea1c", 187 + "type": "inject", 188 + "z": "5f10779accc05655", 189 + "name": "AT+SYNCWORD", 190 + "props": [ 191 + { 192 + "p": "payload" 193 + } 194 + ], 195 + "repeat": "", 196 + "crontab": "", 197 + "once": false, 198 + "onceDelay": 0.1, 199 + "topic": "", 200 + "payload": "AT+SYNCWORD=0", 201 + "payloadType": "str", 202 + "x": 260, 203 + "y": 620, 204 + "wires": [ 205 + [ 206 + "3f8add7e2e1d1d17" 207 + ] 208 + ] 209 + }, 210 + { 211 + "id": "40eac96a52733f7a", 212 + "type": "function", 213 + "z": "5f10779accc05655", 214 + "name": "function 1", 215 + "func": "var data = msg.payload\nif (data.substring(0, 4) == \"Data\")\n{\n if (data.substring(6, 12) == \"(HEX:)\")\n {\n var temp = data.substring(13, 15) + data.substring(16, 18)\n var hum = data.substring(19, 21) + data.substring(22, 24)\n var temp1 = parseInt(temp, 16)/100\n var hum1 = parseInt(hum, 16)/10\n var a1 = { payload: temp1 }, a2 = { payload: hum1 }\n }\n}\nif (data.substring(0, 4) == \"Rssi\")\n{\n var rssi = data.substring(6)\n var a3 = { payload: rssi }\n}\nreturn [a1,a2,a3];\n \n\n", 216 + "outputs": 3, 217 + "noerr": 0, 218 + "initialize": "", 219 + "finalize": "", 220 + "libs": [], 221 + "x": 420, 222 + "y": 60, 223 + "wires": [ 224 + [ 225 + "81edb003937f1a92" 226 + ], 227 + [ 228 + "c63593404a60d9dc" 229 + ], 230 + [ 231 + "61ca71032888887b" 232 + ] 233 + ] 234 + }, 235 + { 236 + "id": "61ca71032888887b", 237 + "type": "ui_chart", 238 + "z": "5f10779accc05655", 239 + "name": "", 240 + "group": "ef41b39771110fa5", 241 + "order": 1, 242 + "width": 0, 243 + "height": 0, 244 + "label": "RSSI", 245 + "chartType": "line", 246 + "legend": "false", 247 + "xformat": "dd HH:mm", 248 + "interpolate": "linear", 249 + "nodata": "", 250 + "dot": true, 251 + "ymin": "", 252 + "ymax": "", 253 + "removeOlder": 1, 254 + "removeOlderPoints": "", 255 + "removeOlderUnit": "3600", 256 + "cutout": 0, 257 + "useOneColor": false, 258 + "useUTC": false, 259 + "colors": [ 260 + "#1f77b4", 261 + "#aec7e8", 262 + "#ff7f0e", 263 + "#2ca02c", 264 + "#98df8a", 265 + "#d62728", 266 + "#ff9896", 267 + "#9467bd", 268 + "#c5b0d5" 269 + ], 270 + "outputs": 1, 271 + "useDifferentColor": false, 272 + "className": "", 273 + "x": 670, 274 + "y": 180, 275 + "wires": [ 276 + [] 277 + ] 278 + }, 279 + { 280 + "id": "81edb003937f1a92", 281 + "type": "ui_chart", 282 + "z": "5f10779accc05655", 283 + "name": "", 284 + "group": "7e1d1c102cf74e6b", 285 + "order": 1, 286 + "width": 0, 287 + "height": 0, 288 + "label": "Temperature", 289 + "chartType": "line", 290 + "legend": "false", 291 + "xformat": "HH:mm:ss", 292 + "interpolate": "linear", 293 + "nodata": "", 294 + "dot": true, 295 + "ymin": "", 296 + "ymax": "", 297 + "removeOlder": 1, 298 + "removeOlderPoints": "", 299 + "removeOlderUnit": "3600", 300 + "cutout": 0, 301 + "useOneColor": false, 302 + "useUTC": false, 303 + "colors": [ 304 + "#1f77b4", 305 + "#aec7e8", 306 + "#ff7f0e", 307 + "#2ca02c", 308 + "#98df8a", 309 + "#d62728", 310 + "#ff9896", 311 + "#9467bd", 312 + "#c5b0d5" 313 + ], 314 + "outputs": 1, 315 + "useDifferentColor": false, 316 + "className": "", 317 + "x": 690, 318 + "y": 100, 319 + "wires": [ 320 + [] 321 + ] 322 + }, 323 + { 324 + "id": "c63593404a60d9dc", 325 + "type": "ui_chart", 326 + "z": "5f10779accc05655", 327 + "name": "", 328 + "group": "3f5d139f158d7c1c", 329 + "order": 2, 330 + "width": 0, 331 + "height": 0, 332 + "label": "Humidity", 333 + "chartType": "line", 334 + "legend": "false", 335 + "xformat": "HH:mm:ss", 336 + "interpolate": "linear", 337 + "nodata": "", 338 + "dot": true, 339 + "ymin": "", 340 + "ymax": "", 341 + "removeOlder": 1, 342 + "removeOlderPoints": "", 343 + "removeOlderUnit": "3600", 344 + "cutout": 0, 345 + "useOneColor": false, 346 + "useUTC": false, 347 + "colors": [ 348 + "#1f77b4", 349 + "#aec7e8", 350 + "#ff7f0e", 351 + "#2ca02c", 352 + "#98df8a", 353 + "#d62728", 354 + "#ff9896", 355 + "#9467bd", 356 + "#c5b0d5" 357 + ], 358 + "outputs": 1, 359 + "useDifferentColor": false, 360 + "className": "", 361 + "x": 680, 362 + "y": 140, 363 + "wires": [ 364 + [] 365 + ] 366 + }, 367 + { 368 + "id": "79722a224bb22c96", 369 + "type": "debug", 370 + "z": "5f10779accc05655", 371 + "name": "debug 1", 372 + "active": true, 373 + "tosidebar": true, 374 + "console": false, 375 + "tostatus": false, 376 + "complete": "false", 377 + "statusVal": "", 378 + "statusType": "auto", 379 + "x": 420, 380 + "y": 180, 381 + "wires": [] 382 + }, 383 + { 384 + "id": "bb1c0e81fd51fa9e", 385 + "type": "serial-port", 386 + "serialport": "/dev/ttyUSB0", 387 + "serialbaud": "9600", 388 + "databits": "8", 389 + "parity": "none", 390 + "stopbits": "1", 391 + "waitfor": "", 392 + "dtr": "none", 393 + "rts": "none", 394 + "cts": "none", 395 + "dsr": "none", 396 + "newline": "\\n", 397 + "bin": "false", 398 + "out": "char", 399 + "addchar": "\\r\\n", 400 + "responsetimeout": "10000" 401 + }, 402 + { 403 + "id": "ef41b39771110fa5", 404 + "type": "ui_group", 405 + "name": "rssi", 406 + "tab": "abb98f80600a5448", 407 + "order": 3, 408 + "disp": true, 409 + "width": "6", 410 + "collapse": false, 411 + "className": "" 412 + }, 413 + { 414 + "id": "7e1d1c102cf74e6b", 415 + "type": "ui_group", 416 + "name": "TEM", 417 + "tab": "abb98f80600a5448", 418 + "order": 4, 419 + "disp": true, 420 + "width": "6", 421 + "collapse": false, 422 + "className": "" 423 + }, 424 + { 425 + "id": "3f5d139f158d7c1c", 426 + "type": "ui_group", 427 + "name": "HUM", 428 + "tab": "abb98f80600a5448", 429 + "order": 2, 430 + "disp": true, 431 + "width": "6", 432 + "collapse": false, 433 + "className": "" 434 + }, 435 + { 436 + "id": "abb98f80600a5448", 437 + "type": "ui_tab", 438 + "name": "LG01v2", 439 + "icon": "LG01v2", 440 + "disabled": false, 441 + "hidden": false 442 + } 443 +]
- arduino-LoRa-master.zip
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +28.6 KB - Content
- image-20221029172156-1.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +7.4 KB - Content
- image-20221029174637-2.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +9.2 KB - Content
- image-20221029174703-3.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +23.7 KB - Content
- image-20221031091550-1.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +20.1 KB - Content
- image-20221031091652-2.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +21.1 KB - Content
- image-20221031091807-3.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +12.6 KB - Content
- image-20221031092053-4.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +8.6 KB - Content
- image-20221101160705-1.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +6.1 KB - Content
- image-20221101161318-2.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +46.3 KB - Content
- image-20221101161951-3.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +131.0 KB - Content
- image-20221101162527-4.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +290.1 KB - Content
- image-20221102105419-1.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +37.3 KB - Content
- image-20221102110604-2.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +35.9 KB - Content
- image-20221102114002-3.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +50.1 KB - Content
- image-20221102140053-4.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +45.6 KB - Content
- image-20221103140645-1.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +39.1 KB - Content
- image-20221103142228-2.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +37.7 KB - Content
- image-20221103142416-3.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +325.9 KB - Content
- image-20221103143528-4.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +25.2 KB - Content
- image-20221103143618-5.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +25.1 KB - Content
- image-20221103144405-6.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +32.8 KB - Content
- image-20221103152033-7.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +25.3 KB - Content
- image-20221103152238-8.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +32.8 KB - Content
- image-20221104100344-1.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +137.0 KB - Content
- image-20221104100520-2.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +140.7 KB - Content
- image-20221104102736-3.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +325.9 KB - Content
- image-20221104155612-1.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +384.2 KB - Content
- image-20221104155654-2.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +35.5 KB - Content
- image-20221104155724-3.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +42.4 KB - Content
- image-20221104155907-4.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +66.7 KB - Content
- image-20221104155928-5.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +49.5 KB - Content
- image-20221104155949-6.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +46.0 KB - Content
- image-20221108164337-1.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +17.5 KB - Content
- image-20221108164413-2.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +27.1 KB - Content
- image-20221108170314-3.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +34.6 KB - Content
- image-20221108170621-4.jpeg
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +544.6 KB - Content
- image-20221108170731-5.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +2.5 MB - Content
- image-20221108172149-6.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +17.5 KB - Content
- image-20221108172432-7.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +45.9 KB - Content
- image-20221108174840-8.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +52.1 KB - Content
- image-20221108175113-9.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +72.6 KB - Content
- image-20221108180334-10.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +159.3 KB - Content
- image-20221108180458-11.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +52.4 KB - Content
- image-20221112161031-1.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +35.1 KB - Content
- image-20221112161111-2.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +34.8 KB - Content
- image-20221112162733-3.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +78.7 KB - Content
- serial USB.json
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Kilight - Size
-
... ... @@ -1,0 +1,1 @@ 1 +5.1 KB - Content
-
... ... @@ -1,0 +1,244 @@ 1 +[ 2 + { 3 + "id": "5f10779accc05655", 4 + "type": "tab", 5 + "label": "serial USB", 6 + "disabled": false, 7 + "info": "", 8 + "env": [] 9 + }, 10 + { 11 + "id": "4ea60ce4df40717c", 12 + "type": "serial in", 13 + "z": "5f10779accc05655", 14 + "name": "", 15 + "serial": "bb1c0e81fd51fa9e", 16 + "x": 230, 17 + "y": 60, 18 + "wires": [ 19 + [ 20 + "a8a0db18429e7d84" 21 + ] 22 + ] 23 + }, 24 + { 25 + "id": "a8a0db18429e7d84", 26 + "type": "debug", 27 + "z": "5f10779accc05655", 28 + "name": "debug 1", 29 + "active": true, 30 + "tosidebar": true, 31 + "console": false, 32 + "tostatus": false, 33 + "complete": "false", 34 + "statusVal": "", 35 + "statusType": "auto", 36 + "x": 440, 37 + "y": 60, 38 + "wires": [] 39 + }, 40 + { 41 + "id": "fe5a93a52b6adcf1", 42 + "type": "inject", 43 + "z": "5f10779accc05655", 44 + "name": "AT+SEND=1,hello world,0,3", 45 + "props": [ 46 + { 47 + "p": "payload" 48 + } 49 + ], 50 + "repeat": "", 51 + "crontab": "", 52 + "once": false, 53 + "onceDelay": 0.1, 54 + "topic": "", 55 + "payload": "AT+SEND=1,hello world,0,3", 56 + "payloadType": "str", 57 + "x": 200, 58 + "y": 140, 59 + "wires": [ 60 + [ 61 + "3f8add7e2e1d1d17" 62 + ] 63 + ] 64 + }, 65 + { 66 + "id": "3f8add7e2e1d1d17", 67 + "type": "serial out", 68 + "z": "5f10779accc05655", 69 + "name": "", 70 + "serial": "bb1c0e81fd51fa9e", 71 + "x": 530, 72 + "y": 140, 73 + "wires": [] 74 + }, 75 + { 76 + "id": "16e7d3d83d9e9415", 77 + "type": "inject", 78 + "z": "5f10779accc05655", 79 + "name": "", 80 + "props": [ 81 + { 82 + "p": "payload" 83 + } 84 + ], 85 + "repeat": "", 86 + "crontab": "", 87 + "once": false, 88 + "onceDelay": 0.1, 89 + "topic": "", 90 + "payload": "ATZ", 91 + "payloadType": "str", 92 + "x": 270, 93 + "y": 200, 94 + "wires": [ 95 + [ 96 + "3f8add7e2e1d1d17" 97 + ] 98 + ] 99 + }, 100 + { 101 + "id": "09ea381519629dae", 102 + "type": "inject", 103 + "z": "5f10779accc05655", 104 + "name": "AT+FRE", 105 + "props": [ 106 + { 107 + "p": "payload" 108 + } 109 + ], 110 + "repeat": "", 111 + "crontab": "", 112 + "once": false, 113 + "onceDelay": 0.1, 114 + "topic": "", 115 + "payload": "AT+FRE=868.100,868.100", 116 + "payloadType": "str", 117 + "x": 260, 118 + "y": 260, 119 + "wires": [ 120 + [ 121 + "3f8add7e2e1d1d17" 122 + ] 123 + ] 124 + }, 125 + { 126 + "id": "5167a7f904013ffd", 127 + "type": "inject", 128 + "z": "5f10779accc05655", 129 + "name": "AT+BW", 130 + "props": [ 131 + { 132 + "p": "payload" 133 + } 134 + ], 135 + "repeat": "", 136 + "crontab": "", 137 + "once": false, 138 + "onceDelay": 0.1, 139 + "topic": "", 140 + "payload": "AT+BW=0,0", 141 + "payloadType": "str", 142 + "x": 270, 143 + "y": 320, 144 + "wires": [ 145 + [ 146 + "3f8add7e2e1d1d17" 147 + ] 148 + ] 149 + }, 150 + { 151 + "id": "dbe4abbc730c76e6", 152 + "type": "inject", 153 + "z": "5f10779accc05655", 154 + "name": "AT+SF", 155 + "props": [ 156 + { 157 + "p": "payload" 158 + } 159 + ], 160 + "repeat": "", 161 + "crontab": "", 162 + "once": false, 163 + "onceDelay": 0.1, 164 + "topic": "", 165 + "payload": "AT+SF=12,12", 166 + "payloadType": "str", 167 + "x": 270, 168 + "y": 380, 169 + "wires": [ 170 + [ 171 + "3f8add7e2e1d1d17" 172 + ] 173 + ] 174 + }, 175 + { 176 + "id": "3be3ab296a75d512", 177 + "type": "inject", 178 + "z": "5f10779accc05655", 179 + "name": "AT+RXMOD", 180 + "props": [ 181 + { 182 + "p": "payload" 183 + } 184 + ], 185 + "repeat": "", 186 + "crontab": "", 187 + "once": false, 188 + "onceDelay": 0.1, 189 + "topic": "", 190 + "payload": "AT+RXMOD=65535,0", 191 + "payloadType": "str", 192 + "x": 250, 193 + "y": 440, 194 + "wires": [ 195 + [ 196 + "3f8add7e2e1d1d17" 197 + ] 198 + ] 199 + }, 200 + { 201 + "id": "7a03d1413c60ea1c", 202 + "type": "inject", 203 + "z": "5f10779accc05655", 204 + "name": "AT+SYNCWORD", 205 + "props": [ 206 + { 207 + "p": "payload" 208 + } 209 + ], 210 + "repeat": "", 211 + "crontab": "", 212 + "once": false, 213 + "onceDelay": 0.1, 214 + "topic": "", 215 + "payload": "AT+SYNCWORD=0", 216 + "payloadType": "str", 217 + "x": 240, 218 + "y": 500, 219 + "wires": [ 220 + [ 221 + "3f8add7e2e1d1d17" 222 + ] 223 + ] 224 + }, 225 + { 226 + "id": "bb1c0e81fd51fa9e", 227 + "type": "serial-port", 228 + "serialport": "/dev/ttyUSB0", 229 + "serialbaud": "9600", 230 + "databits": "8", 231 + "parity": "none", 232 + "stopbits": "1", 233 + "waitfor": "", 234 + "dtr": "none", 235 + "rts": "none", 236 + "cts": "none", 237 + "dsr": "none", 238 + "newline": "\\n", 239 + "bin": "false", 240 + "out": "char", 241 + "addchar": "\\n", 242 + "responsetimeout": "10000" 243 + } 244 +]