Last modified by Kilight Cao on 2024/03/04 09:10
<
From version < 70.1 >
edited by Kilight Cao
on 2022/11/04 15:59
To version < 39.1 >
edited by Kilight Cao
on 2022/11/01 16:32
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -14,16 +14,16 @@
14 14  = **1. Introduction** =
15 15  
16 16  
17 -== **1.1 What is LG01-V2** ==
17 +== **1.1 What is LG01v2** ==
18 18  
19 19  
20 20  (((
21 21  (((
22 -The LG01-V2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
22 +The LG01v2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
23 23  )))
24 24  
25 25  (((
26 -LG01-V2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
26 +LG01v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
27 27  )))
28 28  
29 29  
... ... @@ -216,130 +216,103 @@
216 216  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220917144725-6.png?width=869&height=208&rev=1.1||alt="image-20220917144725-6.png"]]
217 217  
218 218  
219 -= (% id="cke_bm_1978S" style="display:none" %)** **(%%)**4. Build in Server** =
220 220  
220 += **4. How to configure the LA66 module** =
221 221  
222 -The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
223 223  
223 +== **4.1 Access the LA66 module** ==
224 224  
225 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820115644-1.png?width=778&height=217&rev=1.1||alt="image-20220820115644-1.png"]]
226 226  
226 +Users can access the LA66 module by running the following command, then select the option **''serial port setup"**:
227 227  
228 -(% style="color:red" %)**Note:**
228 +(% class="box infomessage" %)
229 +(((
230 +**root@dragino-2406ef:~~# minicom -s**
231 +)))
229 229  
230 - **Path**: System ~-~-> Built-in Server
233 +[[image:image-20221029174637-2.png||height="410" width="524"]]
231 231  
232 232  
233 -**Troubleshooting:**
236 +And then, change the setting:
234 234  
238 +(% class="box infomessage" %)
239 +(((
240 +**Serial Device :** **/dev/ttyUSB0**
235 235  
236 -**~ 1. URL does not jump properly**
242 +**Bps/Par/Bits : 9600 8N1**
243 +)))
237 237  
238 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
239 239  
246 +(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**(%%)
247 +(% style="color:red" %)[[image:image-20221029174703-3.png]]
240 240  
241 241  
242 -== **4.1 Application Server ~-~- Node-Red** ==
250 +Enter **AT+CFG **in the interface to get the configuration,
243 243  
252 +[[image:image-20221029172156-1.png||height="315" width="358"]]
244 244  
245 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
246 246  
255 +== **4.2 Example: LG01v2 Peer-to-Peer** ==
247 247  
248 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
249 249  
258 +(% style="color:red" %)**LG01v2 as Receiver: (configured as AT+RXMOD=65535,2)**
250 250  
251 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
260 +[[image:image-20221031091652-2.png]]
252 252  
253 253  
254 -= **5. How to configure the Lora Gateway** =
263 +(% style="color:red" %)**Sender:**
255 255  
256 256  
257 -== **5.1 Access the Lora configuration page** ==
266 +[[image:image-20221031092053-4.png]]
258 258  
259 259  
260 -Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**:
261 -
262 -(% class="box infomessage" %)
263 -(((
264 -**root@dragino-2406ef:~~# minicom -s**
269 +Instruction for LA66 Peer-to-Peer firmware :[[ **Instruction **>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]
265 265  )))
266 266  
267 -[[image:image-20221029174637-2.png||height="410" width="524"]]
268 268  
273 += **5. Build in Server** =
269 269  
270 -And then, change the setting:
271 271  
272 -(% class="box infomessage" %)
273 -(((
274 -**Serial Device :** **/dev/ttyUSB0**
276 +The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
275 275  
276 -**Bps/Par/Bits : 9600 8N1**
277 -)))
278 278  
279 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820115644-1.png?width=778&height=217&rev=1.1||alt="image-20220820115644-1.png"]]
279 279  
280 -(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**(%%)
281 -(% style="color:red" %)[[image:image-20221029174703-3.png]]
282 282  
282 +(% style="color:red" %)**Note:**
283 283  
284 -Enter **AT+CFG **in the interface to get the configuration,
284 + **Path**: System ~-~-> Built-in Server
285 285  
286 286  
287 -(% class="box infomessage" %)
288 -(((
289 -AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
290 -AT+GROUPMOD=0,0  ~-~--> TX and RX group
291 -AT+BW=0,0  ~-~--> TX and RX Bandwidth
292 -AT+SF=12,12  ~-~--> TX and RX Spreading Factor
293 -AT+POWER=14  ~-~--> TX Power Range
294 -AT+CRC=1,1  ~-~--> TX and RX CRC Type
295 -AT+HEADER=0,0  ~-~--> TX and RX Header Type
296 -AT+CR=1,1  ~-~--> TX and RX Coding Rate
297 -AT+IQ=0,0  ~-~--> TX and RX InvertIQ
298 -AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length
299 -AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
300 -AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
301 -AT+RXDAFORM=1                              
302 -)))
287 +**Troubleshooting:**
303 303  
304 304  
305 -== **5.2 Example: LG01**-**V2 Peer-to-Peer** ==
290 +**~ 1. URL does not jump properly**
306 306  
292 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
307 307  
308 -[[image:image-20221104102736-3.png||height="282" width="723"]]
309 309  
310 310  
311 -The user can run the AT command to set the LG01-V2 RX window always open as a Receiver, the LA66 Shield uses **AT+SEND=1,hello world,2,3** to simulate sending data,
296 +== **5.1 Application Server ~-~- Node-Red** ==
312 312  
313 -**Prerequisites: **The configuration of LG01-V2 and  LA66 Shield must match, users can use **AT+CFG** to check all configurations.
314 314  
299 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
315 315  
316 -(% style="color:red; font-weight:bold" %)**LG01-V**(% style="color:red" %)**2 as Receiver: (configured as AT+RXMOD=65535,2)**
317 317  
318 -[[image:image-20221102140053-4.png]]
302 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
319 319  
320 320  
321 -(% style="color:red" %)**LA66 Shield as Sender: (AT+SEND=1,hello world,2,3)**
305 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
322 322  
323 -[[image:1667456058832-484.png||height="291" width="353"]]
324 324  
308 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01v2 using serial USB**(%%) =
325 325  
326 -Instruction for Peer-to-Peer firmware:[[ **Instruction **>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]
327 -)))
328 328  
311 +(% style="color:blue" %)**USB TTL to LG01v2  Connection:**
329 329  
330 -Users can import this example in node-red: **[[attach:serial USB.json||target="_blank"]]**
331 331  
332 -[[image:image-20221104100520-2.png||height="605" width="1150"]]
314 +Port 1 of the UART on the LG01v2 is GND
333 333  
334 -
335 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**-V​​​​​​​(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
336 -
337 -
338 -(% style="color:blue" %)**USB TTL to LG01-V2  Connection:**
339 -
340 -
341 -Port 1 of the UART on the LG01-V2 is GND
342 -
343 343  (% class="box infomessage" %)
344 344  (((
345 345  **TXD  <~-~--> UART RXD (Gray line)**
... ... @@ -350,7 +350,7 @@
350 350  )))
351 351  
352 352  
353 -**LG01-V2 UART connection photo**
326 +**LG01v2 UART connection photo**
354 354  
355 355  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
356 356  
... ... @@ -367,34 +367,16 @@
367 367  = **7. FAQ** =
368 368  
369 369  
370 -== **7.1 How does LG01-V2 communicate with Lora shield (LoRa.h)** ==
343 +== **7.1 How does LG01v2 communicate with Lora shield (LoRa.h)** ==
371 371  
372 372  
373 -This example describes how to use LG01-V2, LoRa Shield to set up a LoRa network
346 +(% style="color:red" %)Prerequisites: The configurations of LG01v2 and Lora shield must match
374 374  
375 -[[image:image-20221103152238-8.png||height="251" width="654"]]
348 +**LG01v2 configuration:**
376 376  
350 +[[image:image-20221101160705-1.png]]
377 377  
378 -(% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
379 379  
380 -**LG01-V2 configuration:**
381 -
382 -(% class="box infomessage" %)
383 -(((
384 -AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
385 -AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
386 -AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
387 -AT+POWER=14  ~-~--> TX Power Range
388 -AT+CRC=1,1  ~-~--> TX and RX CRC Type
389 -AT+HEADER=0,0  ~-~--> TX and RX Header Type
390 -AT+CR=1,1  ~-~--> TX and RX Coding Rate
391 -AT+IQ=0,0  ~-~--> TX and RX InvertIQ
392 -AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
393 -AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
394 -AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode,RX window always open
395 -AT+RXDAFORM=1    
396 -)))
397 -
398 398  **Lora shield configuration:**
399 399  
400 400  Lora Shield example: [[attach:LoRa_Shield_Sketch_For_MQTT.ino||target="_blank"]] , [[attach:arduino-LoRa-master.zip||target="_blank"]]
... ... @@ -402,12 +402,12 @@
402 402  [[image:image-20221101161318-2.png]]
403 403  
404 404  
405 -**Test LG01-V2 to receive Lora Shield data:**
360 +**Test LG01v2 to receive Lora Shield data:**
406 406  
407 407  [[image:image-20221101161951-3.png]]
408 408  
409 409  
410 -**Test the LG01-V​​​​​​​2 to send data:**
365 +**Test the LG01v2 to send data:**
411 411  
412 412  [[image:image-20221101162527-4.png]]
413 413  
1667456058832-484.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.0 KB
Content
image-20221102105419-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.3 KB
Content
image-20221102110604-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.9 KB
Content
image-20221102114002-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -50.1 KB
Content
image-20221102140053-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20221103140645-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -39.1 KB
Content
image-20221103142228-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.7 KB
Content
image-20221103142416-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -325.9 KB
Content
image-20221103143528-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20221103143618-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20221103144405-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -32.8 KB
Content
image-20221103152033-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20221103152238-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -32.8 KB
Content
image-20221104100344-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -137.0 KB
Content
image-20221104100520-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -140.7 KB
Content
image-20221104102736-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -325.9 KB
Content
image-20221104155612-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -384.2 KB
Content
image-20221104155654-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20221104155724-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -42.4 KB
Content
image-20221104155907-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -66.7 KB
Content
serial USB.json
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 KB
Content
... ... @@ -1,244 +1,0 @@
1 -[
2 - {
3 - "id": "5f10779accc05655",
4 - "type": "tab",
5 - "label": "serial USB",
6 - "disabled": false,
7 - "info": "",
8 - "env": []
9 - },
10 - {
11 - "id": "4ea60ce4df40717c",
12 - "type": "serial in",
13 - "z": "5f10779accc05655",
14 - "name": "",
15 - "serial": "bb1c0e81fd51fa9e",
16 - "x": 230,
17 - "y": 60,
18 - "wires": [
19 - [
20 - "a8a0db18429e7d84"
21 - ]
22 - ]
23 - },
24 - {
25 - "id": "a8a0db18429e7d84",
26 - "type": "debug",
27 - "z": "5f10779accc05655",
28 - "name": "debug 1",
29 - "active": true,
30 - "tosidebar": true,
31 - "console": false,
32 - "tostatus": false,
33 - "complete": "false",
34 - "statusVal": "",
35 - "statusType": "auto",
36 - "x": 440,
37 - "y": 60,
38 - "wires": []
39 - },
40 - {
41 - "id": "fe5a93a52b6adcf1",
42 - "type": "inject",
43 - "z": "5f10779accc05655",
44 - "name": "AT+SEND=1,hello world,0,3",
45 - "props": [
46 - {
47 - "p": "payload"
48 - }
49 - ],
50 - "repeat": "",
51 - "crontab": "",
52 - "once": false,
53 - "onceDelay": 0.1,
54 - "topic": "",
55 - "payload": "AT+SEND=1,hello world,0,3",
56 - "payloadType": "str",
57 - "x": 200,
58 - "y": 140,
59 - "wires": [
60 - [
61 - "3f8add7e2e1d1d17"
62 - ]
63 - ]
64 - },
65 - {
66 - "id": "3f8add7e2e1d1d17",
67 - "type": "serial out",
68 - "z": "5f10779accc05655",
69 - "name": "",
70 - "serial": "bb1c0e81fd51fa9e",
71 - "x": 530,
72 - "y": 140,
73 - "wires": []
74 - },
75 - {
76 - "id": "16e7d3d83d9e9415",
77 - "type": "inject",
78 - "z": "5f10779accc05655",
79 - "name": "",
80 - "props": [
81 - {
82 - "p": "payload"
83 - }
84 - ],
85 - "repeat": "",
86 - "crontab": "",
87 - "once": false,
88 - "onceDelay": 0.1,
89 - "topic": "",
90 - "payload": "ATZ",
91 - "payloadType": "str",
92 - "x": 270,
93 - "y": 200,
94 - "wires": [
95 - [
96 - "3f8add7e2e1d1d17"
97 - ]
98 - ]
99 - },
100 - {
101 - "id": "09ea381519629dae",
102 - "type": "inject",
103 - "z": "5f10779accc05655",
104 - "name": "AT+FRE",
105 - "props": [
106 - {
107 - "p": "payload"
108 - }
109 - ],
110 - "repeat": "",
111 - "crontab": "",
112 - "once": false,
113 - "onceDelay": 0.1,
114 - "topic": "",
115 - "payload": "AT+FRE=868.100,868.100",
116 - "payloadType": "str",
117 - "x": 260,
118 - "y": 260,
119 - "wires": [
120 - [
121 - "3f8add7e2e1d1d17"
122 - ]
123 - ]
124 - },
125 - {
126 - "id": "5167a7f904013ffd",
127 - "type": "inject",
128 - "z": "5f10779accc05655",
129 - "name": "AT+BW",
130 - "props": [
131 - {
132 - "p": "payload"
133 - }
134 - ],
135 - "repeat": "",
136 - "crontab": "",
137 - "once": false,
138 - "onceDelay": 0.1,
139 - "topic": "",
140 - "payload": "AT+BW=0,0",
141 - "payloadType": "str",
142 - "x": 270,
143 - "y": 320,
144 - "wires": [
145 - [
146 - "3f8add7e2e1d1d17"
147 - ]
148 - ]
149 - },
150 - {
151 - "id": "dbe4abbc730c76e6",
152 - "type": "inject",
153 - "z": "5f10779accc05655",
154 - "name": "AT+SF",
155 - "props": [
156 - {
157 - "p": "payload"
158 - }
159 - ],
160 - "repeat": "",
161 - "crontab": "",
162 - "once": false,
163 - "onceDelay": 0.1,
164 - "topic": "",
165 - "payload": "AT+SF=12,12",
166 - "payloadType": "str",
167 - "x": 270,
168 - "y": 380,
169 - "wires": [
170 - [
171 - "3f8add7e2e1d1d17"
172 - ]
173 - ]
174 - },
175 - {
176 - "id": "3be3ab296a75d512",
177 - "type": "inject",
178 - "z": "5f10779accc05655",
179 - "name": "AT+RXMOD",
180 - "props": [
181 - {
182 - "p": "payload"
183 - }
184 - ],
185 - "repeat": "",
186 - "crontab": "",
187 - "once": false,
188 - "onceDelay": 0.1,
189 - "topic": "",
190 - "payload": "AT+RXMOD=65535,0",
191 - "payloadType": "str",
192 - "x": 250,
193 - "y": 440,
194 - "wires": [
195 - [
196 - "3f8add7e2e1d1d17"
197 - ]
198 - ]
199 - },
200 - {
201 - "id": "7a03d1413c60ea1c",
202 - "type": "inject",
203 - "z": "5f10779accc05655",
204 - "name": "AT+SYNCWORD",
205 - "props": [
206 - {
207 - "p": "payload"
208 - }
209 - ],
210 - "repeat": "",
211 - "crontab": "",
212 - "once": false,
213 - "onceDelay": 0.1,
214 - "topic": "",
215 - "payload": "AT+SYNCWORD=0",
216 - "payloadType": "str",
217 - "x": 240,
218 - "y": 500,
219 - "wires": [
220 - [
221 - "3f8add7e2e1d1d17"
222 - ]
223 - ]
224 - },
225 - {
226 - "id": "bb1c0e81fd51fa9e",
227 - "type": "serial-port",
228 - "serialport": "/dev/ttyUSB0",
229 - "serialbaud": "9600",
230 - "databits": "8",
231 - "parity": "none",
232 - "stopbits": "1",
233 - "waitfor": "",
234 - "dtr": "none",
235 - "rts": "none",
236 - "cts": "none",
237 - "dsr": "none",
238 - "newline": "\\n",
239 - "bin": "false",
240 - "out": "char",
241 - "addchar": "\\n",
242 - "responsetimeout": "10000"
243 - }
244 -]

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0