Last modified by Kilight Cao on 2024/03/04 09:10
<
From version < 66.1 >
edited by Kilight Cao
on 2022/11/04 10:29
To version < 49.1 >
edited by Kilight Cao
on 2022/11/03 14:06
>
Change comment: Uploaded new attachment "image-20221103140645-1.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -14,16 +14,16 @@
14 14  = **1. Introduction** =
15 15  
16 16  
17 -== **1.1 What is LG01-V2** ==
17 +== **1.1 What is LG01v2** ==
18 18  
19 19  
20 20  (((
21 21  (((
22 -The LG01-V2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
22 +The LG01v2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
23 23  )))
24 24  
25 25  (((
26 -LG01-V2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
26 +LG01v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
27 27  )))
28 28  
29 29  
... ... @@ -88,7 +88,7 @@
88 88  == **1.6 Button Intruction** ==
89 89  
90 90  
91 -LG01-V2 has a black toggle button, which is:
91 +LG01v2 has a black toggle button, which is:
92 92  
93 93  
94 94  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
... ... @@ -119,7 +119,7 @@
119 119  === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
120 120  
121 121  
122 -Connect the LG01-V2 Ethernet port to your router and LG01-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01-V2.
122 +Connect the LG01v2 Ethernet port to your router and LG01v2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01v2.
123 123  
124 124  You can also use this IP to connect.
125 125  
... ... @@ -132,7 +132,7 @@
132 132  
133 133  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100542-2.png?width=1256&height=369&rev=1.1||alt="image-20220622100542-2.png"]]
134 134  
135 -The LG01-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
135 +The LG01v2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
136 136  
137 137  
138 138  (% style="color:#037691" %)**Steps to connect via fallback IP:**
... ... @@ -216,49 +216,15 @@
216 216  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220917144725-6.png?width=869&height=208&rev=1.1||alt="image-20220917144725-6.png"]]
217 217  
218 218  
219 -= (% id="cke_bm_1978S" style="display:none" %)** **(%%)**4. Build in Server** =
220 220  
220 += **4. How to configure the Lora Gateway** =
221 221  
222 -The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
223 223  
223 +== **4.1 Access the Lora configuration page** ==
224 224  
225 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820115644-1.png?width=778&height=217&rev=1.1||alt="image-20220820115644-1.png"]]
226 226  
226 +Users can access the LA66 module by running the following command, then select the option **''serial port setup"**:
227 227  
228 -(% style="color:red" %)**Note:**
229 -
230 - **Path**: System ~-~-> Built-in Server
231 -
232 -
233 -**Troubleshooting:**
234 -
235 -
236 -**~ 1. URL does not jump properly**
237 -
238 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
239 -
240 -
241 -
242 -== **4.1 Application Server ~-~- Node-Red** ==
243 -
244 -
245 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
246 -
247 -
248 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
249 -
250 -
251 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
252 -
253 -
254 -= **5. How to configure the Lora Gateway** =
255 -
256 -
257 -== **5.1 Access the Lora configuration page** ==
258 -
259 -
260 -Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**:
261 -
262 262  (% class="box infomessage" %)
263 263  (((
264 264  **root@dragino-2406ef:~~# minicom -s**
... ... @@ -302,25 +302,25 @@
302 302  )))
303 303  
304 304  
305 -== **5.2 Example: LG01**-**V2 Peer-to-Peer** ==
271 +== **4.2 Example: LG01v2 Peer-to-Peer** ==
306 306  
273 +[[image:image-20221102114002-3.png]]
307 307  
308 -[[image:image-20221104102736-3.png||height="282" width="723"]]
309 309  
276 +The user can run the AT command to set the LG01v2 RX window always open as a Receiver, the Sender uses **AT+SEND=1,hello world,2,3** to simulate sending data,
310 310  
311 -The user can run the AT command to set the LG01-V2 RX window always open as a Receiver, the LA66 Shield uses **AT+SEND=1,hello world,2,3** to simulate sending data,
278 +Prerequisites: The configuration of LG01v2 and Sender must match, users can use **AT+CFG** to check all configurations.
312 312  
313 -**Prerequisites: **The configuration of LG01-V2 and  LA66 Shield must match, users can use **AT+CFG** to check all configurations.
314 314  
281 +(% style="color:red" %)**LG01v2 as Receiver: (configured as AT+RXMOD=65535,2)**
315 315  
316 -(% style="color:red; font-weight:bold" %)**LG01-V**(% style="color:red" %)**2 as Receiver: (configured as AT+RXMOD=65535,2)**
317 317  
318 318  [[image:image-20221102140053-4.png]]
319 319  
320 320  
321 -(% style="color:red" %)**LA66 Shield as Sender: (AT+SEND=1,hello world,2,3)**
287 +(% style="color:red" %)**Sender: (AT+SEND=1,hello world,2,3)**
322 322  
323 -[[image:1667456058832-484.png||height="291" width="353"]]
289 +[[image:image-20221031092053-4.png]]
324 324  
325 325  
326 326  Instruction for Peer-to-Peer firmware:[[ **Instruction **>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]
... ... @@ -327,19 +327,49 @@
327 327  )))
328 328  
329 329  
330 -Users can import this example in node-red: **[[attach:serial USB.json||target="_blank"]]**
296 += **5. Build in Server** =
331 331  
332 -[[image:image-20221104100520-2.png||height="605" width="1150"]]
333 333  
299 +The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
334 334  
335 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**-V​​​​​​​(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
336 336  
302 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820115644-1.png?width=778&height=217&rev=1.1||alt="image-20220820115644-1.png"]]
337 337  
338 -(% style="color:blue" %)**USB TTL to LG01-V2  Connection:**
339 339  
305 +(% style="color:red" %)**Note:**
340 340  
341 -Port 1 of the UART on the LG01-V2 is GND
307 + **Path**: System ~-~-> Built-in Server
342 342  
309 +
310 +**Troubleshooting:**
311 +
312 +
313 +**~ 1. URL does not jump properly**
314 +
315 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
316 +
317 +
318 +
319 +== **5.1 Application Server ~-~- Node-Red** ==
320 +
321 +
322 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
323 +
324 +
325 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
326 +
327 +
328 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
329 +
330 +
331 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01v2 using serial USB**(%%) =
332 +
333 +
334 +(% style="color:blue" %)**USB TTL to LG01v2  Connection:**
335 +
336 +
337 +Port 1 of the UART on the LG01v2 is GND
338 +
343 343  (% class="box infomessage" %)
344 344  (((
345 345  **TXD  <~-~--> UART RXD (Gray line)**
... ... @@ -350,7 +350,7 @@
350 350  )))
351 351  
352 352  
353 -**LG01-V2 UART connection photo**
349 +**LG01v2 UART connection photo**
354 354  
355 355  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
356 356  
... ... @@ -367,31 +367,26 @@
367 367  = **7. FAQ** =
368 368  
369 369  
370 -== **7.1 How does LG01-V2 communicate with Lora shield (LoRa.h)** ==
366 +== **7.1 How does LG01v2 communicate with Lora shield (LoRa.h)** ==
371 371  
372 372  
373 -This example describes how to use LG01-V2, LoRa Shield to set up a LoRa network
369 +(% style="color:red" %)**Prerequisites: The configurations of LG01v2 and Lora shield must match**
374 374  
375 -[[image:image-20221103152238-8.png||height="251" width="654"]]
371 +**LG01v2 configuration:**
376 376  
377 -
378 -(% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
379 -
380 -**LG01-V2 configuration:**
381 -
382 382  (% class="box infomessage" %)
383 383  (((
384 -AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
385 -AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
386 -AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
375 +AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set :868100000
376 +AT+BW=0,0  ~-~--> TX and RX Bandwidth set : 125kHz
377 +AT+SF=12,12  ~-~--> TX and RX Spreading Factor
387 387  AT+POWER=14  ~-~--> TX Power Range
388 388  AT+CRC=1,1  ~-~--> TX and RX CRC Type
389 389  AT+HEADER=0,0  ~-~--> TX and RX Header Type
390 390  AT+CR=1,1  ~-~--> TX and RX Coding Rate
391 391  AT+IQ=0,0  ~-~--> TX and RX InvertIQ
392 -AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
393 -AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
394 -AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode,RX window always open
383 +AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length
384 +AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
385 +AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
395 395  AT+RXDAFORM=1    
396 396  )))
397 397  
... ... @@ -402,12 +402,12 @@
402 402  [[image:image-20221101161318-2.png]]
403 403  
404 404  
405 -**Test LG01-V2 to receive Lora Shield data:**
396 +**Test LG01v2 to receive Lora Shield data:**
406 406  
407 407  [[image:image-20221101161951-3.png]]
408 408  
409 409  
410 -**Test the LG01-V​​​​​​​2 to send data:**
401 +**Test the LG01v2 to send data:**
411 411  
412 412  [[image:image-20221101162527-4.png]]
413 413  
1667456058832-484.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.0 KB
Content
image-20221103142228-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.7 KB
Content
image-20221103142416-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -325.9 KB
Content
image-20221103143528-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20221103143618-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20221103144405-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -32.8 KB
Content
image-20221103152033-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20221103152238-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -32.8 KB
Content
image-20221104100344-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -137.0 KB
Content
image-20221104100520-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -140.7 KB
Content
image-20221104102736-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -325.9 KB
Content
serial USB.json
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 KB
Content
... ... @@ -1,244 +1,0 @@
1 -[
2 - {
3 - "id": "5f10779accc05655",
4 - "type": "tab",
5 - "label": "serial USB",
6 - "disabled": false,
7 - "info": "",
8 - "env": []
9 - },
10 - {
11 - "id": "4ea60ce4df40717c",
12 - "type": "serial in",
13 - "z": "5f10779accc05655",
14 - "name": "",
15 - "serial": "bb1c0e81fd51fa9e",
16 - "x": 230,
17 - "y": 60,
18 - "wires": [
19 - [
20 - "a8a0db18429e7d84"
21 - ]
22 - ]
23 - },
24 - {
25 - "id": "a8a0db18429e7d84",
26 - "type": "debug",
27 - "z": "5f10779accc05655",
28 - "name": "debug 1",
29 - "active": true,
30 - "tosidebar": true,
31 - "console": false,
32 - "tostatus": false,
33 - "complete": "false",
34 - "statusVal": "",
35 - "statusType": "auto",
36 - "x": 440,
37 - "y": 60,
38 - "wires": []
39 - },
40 - {
41 - "id": "fe5a93a52b6adcf1",
42 - "type": "inject",
43 - "z": "5f10779accc05655",
44 - "name": "AT+SEND=1,hello world,0,3",
45 - "props": [
46 - {
47 - "p": "payload"
48 - }
49 - ],
50 - "repeat": "",
51 - "crontab": "",
52 - "once": false,
53 - "onceDelay": 0.1,
54 - "topic": "",
55 - "payload": "AT+SEND=1,hello world,0,3",
56 - "payloadType": "str",
57 - "x": 200,
58 - "y": 140,
59 - "wires": [
60 - [
61 - "3f8add7e2e1d1d17"
62 - ]
63 - ]
64 - },
65 - {
66 - "id": "3f8add7e2e1d1d17",
67 - "type": "serial out",
68 - "z": "5f10779accc05655",
69 - "name": "",
70 - "serial": "bb1c0e81fd51fa9e",
71 - "x": 530,
72 - "y": 140,
73 - "wires": []
74 - },
75 - {
76 - "id": "16e7d3d83d9e9415",
77 - "type": "inject",
78 - "z": "5f10779accc05655",
79 - "name": "",
80 - "props": [
81 - {
82 - "p": "payload"
83 - }
84 - ],
85 - "repeat": "",
86 - "crontab": "",
87 - "once": false,
88 - "onceDelay": 0.1,
89 - "topic": "",
90 - "payload": "ATZ",
91 - "payloadType": "str",
92 - "x": 270,
93 - "y": 200,
94 - "wires": [
95 - [
96 - "3f8add7e2e1d1d17"
97 - ]
98 - ]
99 - },
100 - {
101 - "id": "09ea381519629dae",
102 - "type": "inject",
103 - "z": "5f10779accc05655",
104 - "name": "AT+FRE",
105 - "props": [
106 - {
107 - "p": "payload"
108 - }
109 - ],
110 - "repeat": "",
111 - "crontab": "",
112 - "once": false,
113 - "onceDelay": 0.1,
114 - "topic": "",
115 - "payload": "AT+FRE=868.100,868.100",
116 - "payloadType": "str",
117 - "x": 260,
118 - "y": 260,
119 - "wires": [
120 - [
121 - "3f8add7e2e1d1d17"
122 - ]
123 - ]
124 - },
125 - {
126 - "id": "5167a7f904013ffd",
127 - "type": "inject",
128 - "z": "5f10779accc05655",
129 - "name": "AT+BW",
130 - "props": [
131 - {
132 - "p": "payload"
133 - }
134 - ],
135 - "repeat": "",
136 - "crontab": "",
137 - "once": false,
138 - "onceDelay": 0.1,
139 - "topic": "",
140 - "payload": "AT+BW=0,0",
141 - "payloadType": "str",
142 - "x": 270,
143 - "y": 320,
144 - "wires": [
145 - [
146 - "3f8add7e2e1d1d17"
147 - ]
148 - ]
149 - },
150 - {
151 - "id": "dbe4abbc730c76e6",
152 - "type": "inject",
153 - "z": "5f10779accc05655",
154 - "name": "AT+SF",
155 - "props": [
156 - {
157 - "p": "payload"
158 - }
159 - ],
160 - "repeat": "",
161 - "crontab": "",
162 - "once": false,
163 - "onceDelay": 0.1,
164 - "topic": "",
165 - "payload": "AT+SF=12,12",
166 - "payloadType": "str",
167 - "x": 270,
168 - "y": 380,
169 - "wires": [
170 - [
171 - "3f8add7e2e1d1d17"
172 - ]
173 - ]
174 - },
175 - {
176 - "id": "3be3ab296a75d512",
177 - "type": "inject",
178 - "z": "5f10779accc05655",
179 - "name": "AT+RXMOD",
180 - "props": [
181 - {
182 - "p": "payload"
183 - }
184 - ],
185 - "repeat": "",
186 - "crontab": "",
187 - "once": false,
188 - "onceDelay": 0.1,
189 - "topic": "",
190 - "payload": "AT+RXMOD=65535,0",
191 - "payloadType": "str",
192 - "x": 250,
193 - "y": 440,
194 - "wires": [
195 - [
196 - "3f8add7e2e1d1d17"
197 - ]
198 - ]
199 - },
200 - {
201 - "id": "7a03d1413c60ea1c",
202 - "type": "inject",
203 - "z": "5f10779accc05655",
204 - "name": "AT+SYNCWORD",
205 - "props": [
206 - {
207 - "p": "payload"
208 - }
209 - ],
210 - "repeat": "",
211 - "crontab": "",
212 - "once": false,
213 - "onceDelay": 0.1,
214 - "topic": "",
215 - "payload": "AT+SYNCWORD=0",
216 - "payloadType": "str",
217 - "x": 240,
218 - "y": 500,
219 - "wires": [
220 - [
221 - "3f8add7e2e1d1d17"
222 - ]
223 - ]
224 - },
225 - {
226 - "id": "bb1c0e81fd51fa9e",
227 - "type": "serial-port",
228 - "serialport": "/dev/ttyUSB0",
229 - "serialbaud": "9600",
230 - "databits": "8",
231 - "parity": "none",
232 - "stopbits": "1",
233 - "waitfor": "",
234 - "dtr": "none",
235 - "rts": "none",
236 - "cts": "none",
237 - "dsr": "none",
238 - "newline": "\\n",
239 - "bin": "false",
240 - "out": "char",
241 - "addchar": "\\n",
242 - "responsetimeout": "10000"
243 - }
244 -]

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0