Summary

• Page properties (1 modified, 0 added, 0 removed)
• Attachments (0 modified, 0 added, 22 removed)
  • 1667456058832-484.png
  • LoRa_Shield_Sketch_For_MQTT.ino
  • arduino-LoRa-master.zip
  • image-20221101161318-2.png
  • image-20221101161951-3.png
  • image-20221101162527-4.png
  • image-20221102105419-1.png
  • image-20221102110604-2.png
  • image-20221102114002-3.png
  • image-20221102140053-4.png
  • image-20221103140645-1.png
  • image-20221103142228-2.png
  • image-20221103142416-3.png
  • image-20221103143528-4.png
  • image-20221103143618-5.png
  • image-20221103144405-6.png
  • image-20221103152033-7.png
  • image-20221103152238-8.png
  • image-20221104100344-1.png
  • image-20221104100520-2.png
  • image-20221104102736-3.png
  • serial USB.json

Details

Page properties

Content

...	...	@@ -14,16 +14,16 @@
14	14	= **1. Introduction** =
15	15
16	16
17		-== **1.1 What is LG01-V2** ==
	17	+== **1.1 What is LG01v2** ==
18	18
19	19
20	20	(((
21	21	(((
22		-The LG01-V2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
	22	+The LG01v2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
23	23	)))
24	24
25	25	(((
26		-LG01-V2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
	26	+LG01v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
27	27	)))
28	28
29	29
...	...	@@ -217,13 +217,13 @@
217	217
218	218
219	219
220		-= **4. How to configure the Lora Gateway** =
	220	+= **4. How to configure the LA66 module** =
221	221
222	222
223		-== **4.1 Access the Lora configuration page** ==
	223	+== **4.1 Access the LA66 module** ==
224	224
225	225
226		-Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**:
	226	+Users can access the LA66 module by running the following command, then select the option **''serial port setup"**:
227	227
228	228	(% class="box infomessage" %)
229	229	(((
...	...	@@ -249,47 +249,24 @@
249	249
250	250	Enter **AT+CFG **in the interface to get the configuration,
251	251
	252	+[[image:image-20221029172156-1.png||height="315" width="358"]]
252	252
253		-(% class="box infomessage" %)
254		-(((
255		-AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
256		-AT+GROUPMOD=0,0  ~-~--> TX and RX group
257		-AT+BW=0,0  ~-~--> TX and RX Bandwidth
258		-AT+SF=12,12  ~-~--> TX and RX Spreading Factor
259		-AT+POWER=14  ~-~--> TX Power Range
260		-AT+CRC=1,1  ~-~--> TX and RX CRC Type
261		-AT+HEADER=0,0  ~-~--> TX and RX Header Type
262		-AT+CR=1,1  ~-~--> TX and RX Coding Rate
263		-AT+IQ=0,0  ~-~--> TX and RX InvertIQ
264		-AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length
265		-AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
266		-AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
267		-AT+RXDAFORM=1
268		-)))
269	269
	255	+== **4.2 Example: LG01v2 Peer-to-Peer** ==
270	270
271		-== **4.2 Example: LG01**-**V2 Peer-to-Peer** ==
272	272
	258	+(% style="color:red" %)**LG01v2 as Receiver: (configured as AT+RXMOD=65535,2)**
273	273
274		-[[image:image-20221103152033-7.png||height="281" width="620"]]
	260	+[[image:image-20221031091652-2.png]]
275	275
276	276
277		-The user can run the AT command to set the LG01-V2 RX window always open as a Receiver, the LA66 Shield uses **AT+SEND=1,hello world,2,3** to simulate sending data,
	263	+(% style="color:red" %)**Sender:**
278	278
279		-**Prerequisites: **The configuration of LG01-V2 and  LA66 Shield must match, users can use **AT+CFG** to check all configurations.
280	280
	266	+[[image:image-20221031092053-4.png]]
281	281
282		-(% style="color:red; font-weight:bold" %)**LG01-V**(% style="color:red" %)**2 as Receiver: (configured as AT+RXMOD=65535,2)**
283	283
284		-[[image:image-20221102140053-4.png]]
285		-
286		-
287		-(% style="color:red" %)**LA66 Shield as Sender: (AT+SEND=1,hello world,2,3)**
288		-
289		-[[image:1667456058832-484.png||height="291" width="353"]]
290		-
291		-
292		-Instruction for Peer-to-Peer firmware:[[ **Instruction **>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]
	269	+Instruction for LA66 Peer-to-Peer firmware :[[ **Instruction **>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]
293	293	)))
294	294
295	295
...	...	@@ -328,13 +328,13 @@
328	328	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
329	329
330	330
331		-= (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**-V​​​​​​​(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
	308	+= (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01v2 using serial USB**(%%) =
332	332
333	333
334		-(% style="color:blue" %)**USB TTL to LG01-V2  Connection:**
	311	+(% style="color:blue" %)**USB TTL to LG01v2  Connection:**
335	335
336	336
337		-Port 1 of the UART on the LG01-V2 is GND
	314	+Port 1 of the UART on the LG01v2 is GND
338	338
339	339	(% class="box infomessage" %)
340	340	(((
...	...	@@ -346,7 +346,7 @@
346	346	)))
347	347
348	348
349		-**LG01-V2 UART connection photo**
	326	+**LG01v2 UART connection photo**
350	350
351	351	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
352	352
...	...	@@ -363,51 +363,9 @@
363	363	= **7. FAQ** =
364	364
365	365
366		-== **7.1 How does LG01-V2 communicate with Lora shield (LoRa.h)** ==
	343	+7.1
367	367
368	368
369		-This example describes how to use LG01-V2, LoRa Shield to set up a LoRa network
370		-
371		-[[image:image-20221103152238-8.png||height="251" width="654"]]
372		-
373		-
374		-(% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
375		-
376		-**LG01-V2 configuration:**
377		-
378		-(% class="box infomessage" %)
379		-(((
380		-AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
381		-AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
382		-AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
383		-AT+POWER=14  ~-~--> TX Power Range
384		-AT+CRC=1,1  ~-~--> TX and RX CRC Type
385		-AT+HEADER=0,0  ~-~--> TX and RX Header Type
386		-AT+CR=1,1  ~-~--> TX and RX Coding Rate
387		-AT+IQ=0,0  ~-~--> TX and RX InvertIQ
388		-AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
389		-AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
390		-AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode,RX window always open
391		-AT+RXDAFORM=1
392		-)))
393		-
394		-**Lora shield configuration:**
395		-
396		-Lora Shield example: [[attach:LoRa_Shield_Sketch_For_MQTT.ino||target="_blank"]] , [[attach:arduino-LoRa-master.zip||target="_blank"]]
397		-
398		-[[image:image-20221101161318-2.png]]
399		-
400		-
401		-**Test LG01-V2 to receive Lora Shield data:**
402		-
403		-[[image:image-20221101161951-3.png]]
404		-
405		-
406		-**Test the LG01-V​​​​​​​2 to send data:**
407		-
408		-[[image:image-20221101162527-4.png]]
409		-
410		-
411	411	= (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
412	412
413	413

1667456058832-484.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-21.0 KB

Content

LoRa_Shield_Sketch_For_MQTT.ino

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-2.9 KB

Content

...	...	@@ -1,118 +1,0 @@
1		-#include <SPI.h>
2		-#include <LoRa.h>
3		-
4		-// This is the LoRa Node side sketch for the MQTT example: http://wiki.dragino.com/index.php?title=MQTT_Forward_Instruction#Example_to_communicate_to_a_simple_MQTT_server
5		-
6		-float tem,hum;
7		-char tem_1[8]={"\0"},hum_1[8]={"\0"};
8		-char *node_id = "<4567>"; //From LG01 via web Local Channel settings on MQTT.Please refer <> dataformat in here.
9		-uint8_t datasend[36];
10		-unsigned int count = 1;
11		-unsigned long new_time,old_time=0;
12		-
13		-void setup()
14		-{
15		- Serial.begin(9600);
16		- while (!Serial);
17		- Serial.println(F("Start MQTT Example"));
18		- if (!LoRa.begin(868100000)) //868000000 is frequency
19		- {
20		- Serial.println("Starting LoRa failed!");
21		- while (1);
22		- }
23		- // Setup Spreading Factor (6 ~ 12)
24		- LoRa.setSpreadingFactor(12);
25		-
26		- // Setup BandWidth, option: 7800,10400,15600,20800,31250,41700,62500,125000,250000,500000
27		- //Lower BandWidth for longer distance.
28		- LoRa.setSignalBandwidth(125000);
29		-
30		- // Setup Coding Rate:5(4/5),6(4/6),7(4/7),8(4/8)
31		- LoRa.setCodingRate4(5);
32		- LoRa.setSyncWord(0x12);
33		- void disableCrc();
34		- LoRa.disableInvertIQ();
35		- LoRa.explicitHeaderMode();
36		- Serial.println("LoRa init succeeded.");
37		- LoRa.onReceive(onReceive);
38		- LoRa.receive();
39		-}
40		-
41		-void dhtTem()
42		-{
43		- tem = random(15,40);
44		- hum = random(40,80);
45		- Serial.println(F("The temperature and humidity:"));
46		- Serial.print("[");
47		- Serial.print(tem);
48		- Serial.print("℃");
49		- Serial.print(",");
50		- Serial.print(hum);
51		- Serial.print("%");
52		- Serial.print("]");
53		- Serial.println("");
54		-}
55		-void dhtWrite()
56		-{
57		- char data[50] = "\0";
58		- //for(int i = 0; i < 50; i++)
59		- //{
60		- // data[i] = node_id[i];
61		- //}
62		-
63		- dtostrf(tem,0,1,tem_1);
64		- dtostrf(hum,0,1,hum_1);
65		-
66		- // Serial.println(tem_1);
67		- strcat(data,"tem=");
68		- strcat(data,tem_1);
69		- strcat(data,"&hum=");
70		- strcat(data,hum_1);
71		- strcpy((char *)datasend,data);
72		-
73		- //Serial.println((char *)datasend);
74		- //Serial.println(sizeof datasend);
75		-
76		-}
77		-
78		-
79		-void SendData()
80		-{
81		- LoRa.beginPacket();
82		- LoRa.print((char *)datasend);
83		- LoRa.endPacket();
84		- Serial.println("Packet Sent");
85		-}
86		-
87		-
88		-
89		-void loop()
90		-{
91		- new_time=millis();
92		- if (new_time - old_time >= 30000 || old_time == 0)
93		- {
94		- old_time = new_time;
95		- Serial.print("########### ");
96		- Serial.print("COUNT=");
97		- Serial.print(count);
98		- Serial.println(" ###########");
99		- count++;
100		- dhtTem();
101		- dhtWrite();
102		- SendData();
103		- LoRa.receive();
104		- }
105		-}
106		-
107		-void onReceive(int packetSize) {
108		-
109		- // received a packet
110		- Serial.print("Received packet : ");
111		-
112		- // read packet
113		- for (int i = 0; i < packetSize; i++) {
114		- Serial.print((char)LoRa.read());
115		- }
116		- Serial.print("\n\r");
117		-}
118		-

arduino-LoRa-master.zip

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-28.6 KB

Content

image-20221101161318-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-46.3 KB

Content

image-20221101161951-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-131.0 KB

Content

image-20221101162527-4.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-290.1 KB

Content

image-20221102105419-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-37.3 KB

Content

image-20221102110604-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-35.9 KB

Content

image-20221102114002-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-50.1 KB

Content

image-20221102140053-4.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-45.6 KB

Content

image-20221103140645-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-39.1 KB

Content

image-20221103142228-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-37.7 KB

Content

image-20221103142416-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-325.9 KB

Content

image-20221103143528-4.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-25.2 KB

Content

image-20221103143618-5.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-25.1 KB

Content

image-20221103144405-6.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-32.8 KB

Content

image-20221103152033-7.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-25.3 KB

Content

image-20221103152238-8.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-32.8 KB

Content

image-20221104100344-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-137.0 KB

Content

image-20221104100520-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-140.7 KB

Content

image-20221104102736-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-325.9 KB

Content

serial USB.json

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-5.1 KB

Content

...	...	@@ -1,244 +1,0 @@
1		-[
2		- {
3		- "id": "5f10779accc05655",
4		- "type": "tab",
5		- "label": "serial USB",
6		- "disabled": false,
7		- "info": "",
8		- "env": []
9		- },
10		- {
11		- "id": "4ea60ce4df40717c",
12		- "type": "serial in",
13		- "z": "5f10779accc05655",
14		- "name": "",
15		- "serial": "bb1c0e81fd51fa9e",
16		- "x": 230,
17		- "y": 60,
18		- "wires": [
19		- [
20		- "a8a0db18429e7d84"
21		- ]
22		- ]
23		- },
24		- {
25		- "id": "a8a0db18429e7d84",
26		- "type": "debug",
27		- "z": "5f10779accc05655",
28		- "name": "debug 1",
29		- "active": true,
30		- "tosidebar": true,
31		- "console": false,
32		- "tostatus": false,
33		- "complete": "false",
34		- "statusVal": "",
35		- "statusType": "auto",
36		- "x": 440,
37		- "y": 60,
38		- "wires": []
39		- },
40		- {
41		- "id": "fe5a93a52b6adcf1",
42		- "type": "inject",
43		- "z": "5f10779accc05655",
44		- "name": "AT+SEND=1,hello world,0,3",
45		- "props": [
46		- {
47		- "p": "payload"
48		- }
49		- ],
50		- "repeat": "",
51		- "crontab": "",
52		- "once": false,
53		- "onceDelay": 0.1,
54		- "topic": "",
55		- "payload": "AT+SEND=1,hello world,0,3",
56		- "payloadType": "str",
57		- "x": 200,
58		- "y": 140,
59		- "wires": [
60		- [
61		- "3f8add7e2e1d1d17"
62		- ]
63		- ]
64		- },
65		- {
66		- "id": "3f8add7e2e1d1d17",
67		- "type": "serial out",
68		- "z": "5f10779accc05655",
69		- "name": "",
70		- "serial": "bb1c0e81fd51fa9e",
71		- "x": 530,
72		- "y": 140,
73		- "wires": []
74		- },
75		- {
76		- "id": "16e7d3d83d9e9415",
77		- "type": "inject",
78		- "z": "5f10779accc05655",
79		- "name": "",
80		- "props": [
81		- {
82		- "p": "payload"
83		- }
84		- ],
85		- "repeat": "",
86		- "crontab": "",
87		- "once": false,
88		- "onceDelay": 0.1,
89		- "topic": "",
90		- "payload": "ATZ",
91		- "payloadType": "str",
92		- "x": 270,
93		- "y": 200,
94		- "wires": [
95		- [
96		- "3f8add7e2e1d1d17"
97		- ]
98		- ]
99		- },
100		- {
101		- "id": "09ea381519629dae",
102		- "type": "inject",
103		- "z": "5f10779accc05655",
104		- "name": "AT+FRE",
105		- "props": [
106		- {
107		- "p": "payload"
108		- }
109		- ],
110		- "repeat": "",
111		- "crontab": "",
112		- "once": false,
113		- "onceDelay": 0.1,
114		- "topic": "",
115		- "payload": "AT+FRE=868.100,868.100",
116		- "payloadType": "str",
117		- "x": 260,
118		- "y": 260,
119		- "wires": [
120		- [
121		- "3f8add7e2e1d1d17"
122		- ]
123		- ]
124		- },
125		- {
126		- "id": "5167a7f904013ffd",
127		- "type": "inject",
128		- "z": "5f10779accc05655",
129		- "name": "AT+BW",
130		- "props": [
131		- {
132		- "p": "payload"
133		- }
134		- ],
135		- "repeat": "",
136		- "crontab": "",
137		- "once": false,
138		- "onceDelay": 0.1,
139		- "topic": "",
140		- "payload": "AT+BW=0,0",
141		- "payloadType": "str",
142		- "x": 270,
143		- "y": 320,
144		- "wires": [
145		- [
146		- "3f8add7e2e1d1d17"
147		- ]
148		- ]
149		- },
150		- {
151		- "id": "dbe4abbc730c76e6",
152		- "type": "inject",
153		- "z": "5f10779accc05655",
154		- "name": "AT+SF",
155		- "props": [
156		- {
157		- "p": "payload"
158		- }
159		- ],
160		- "repeat": "",
161		- "crontab": "",
162		- "once": false,
163		- "onceDelay": 0.1,
164		- "topic": "",
165		- "payload": "AT+SF=12,12",
166		- "payloadType": "str",
167		- "x": 270,
168		- "y": 380,
169		- "wires": [
170		- [
171		- "3f8add7e2e1d1d17"
172		- ]
173		- ]
174		- },
175		- {
176		- "id": "3be3ab296a75d512",
177		- "type": "inject",
178		- "z": "5f10779accc05655",
179		- "name": "AT+RXMOD",
180		- "props": [
181		- {
182		- "p": "payload"
183		- }
184		- ],
185		- "repeat": "",
186		- "crontab": "",
187		- "once": false,
188		- "onceDelay": 0.1,
189		- "topic": "",
190		- "payload": "AT+RXMOD=65535,0",
191		- "payloadType": "str",
192		- "x": 250,
193		- "y": 440,
194		- "wires": [
195		- [
196		- "3f8add7e2e1d1d17"
197		- ]
198		- ]
199		- },
200		- {
201		- "id": "7a03d1413c60ea1c",
202		- "type": "inject",
203		- "z": "5f10779accc05655",
204		- "name": "AT+SYNCWORD",
205		- "props": [
206		- {
207		- "p": "payload"
208		- }
209		- ],
210		- "repeat": "",
211		- "crontab": "",
212		- "once": false,
213		- "onceDelay": 0.1,
214		- "topic": "",
215		- "payload": "AT+SYNCWORD=0",
216		- "payloadType": "str",
217		- "x": 240,
218		- "y": 500,
219		- "wires": [
220		- [
221		- "3f8add7e2e1d1d17"
222		- ]
223		- ]
224		- },
225		- {
226		- "id": "bb1c0e81fd51fa9e",
227		- "type": "serial-port",
228		- "serialport": "/dev/ttyUSB0",
229		- "serialbaud": "9600",
230		- "databits": "8",
231		- "parity": "none",
232		- "stopbits": "1",
233		- "waitfor": "",
234		- "dtr": "none",
235		- "rts": "none",
236		- "cts": "none",
237		- "dsr": "none",
238		- "newline": "\\n",
239		- "bin": "false",
240		- "out": "char",
241		- "addchar": "\\n",
242		- "responsetimeout": "10000"
243		- }
244		-]