Last modified by Kilight Cao on 2024/10/12 08:58
<
From version < 61.1 >
edited by Kilight Cao
on 2022/11/03 15:30
To version < 23.1 >
edited by Kilight Cao
on 2022/10/31 09:20
>
Change comment: Uploaded new attachment "image-20221031092053-4.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -14,16 +14,16 @@
14 14  = **1. Introduction** =
15 15  
16 16  
17 -== **1.1 What is LG01-V2** ==
17 +== **1.1 What is LG01v2** ==
18 18  
19 19  
20 20  (((
21 21  (((
22 -The LG01-V2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
22 +The LG01v2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
23 23  )))
24 24  
25 25  (((
26 -LG01-V2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
26 +LG01v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
27 27  )))
28 28  
29 29  
... ... @@ -102,12 +102,12 @@
102 102  
103 103  
104 104  
105 -= **2. Quick Start** =
105 += ** 2. Quick Start** =
106 106  
107 107  
108 -The LG01-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
108 +The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
109 109  
110 -In most cases, the first thing you need to do is make the LG01-v2 accessible to the network.
110 +In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
111 111  
112 112  
113 113  == **2.1 Connects to the network and accesses the gateway Web UI** ==
... ... @@ -119,112 +119,51 @@
119 119  === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
120 120  
121 121  
122 -Connect the LG01-V2 Ethernet port to your router and LG01-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01-V2.
122 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
123 123  
124 124  You can also use this IP to connect.
125 125  
126 -
127 127  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100129-1.png?width=1263&height=332&rev=1.1||alt="image-20220622100129-1.png"]]
128 128  
128 +=== **Method 2**:  Connect via WiFi with DHCP IP from the router ===
129 129  
130 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
130 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
131 131  
132 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
132 132  
133 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100542-2.png?width=1256&height=369&rev=1.1||alt="image-20220622100542-2.png"]]
134 +**Steps to connect via fallback IP:**
134 134  
135 -The LG01-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
136 +~1. Connect PC's Ethernet port to LPS8-V2's WAN port
136 136  
137 -
138 -(% style="color:#037691" %)**Steps to connect via fallback IP:**
139 -
140 -~1. Connect PC's Ethernet port to LG01-V2's WAN port
141 -
142 142  2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
143 143  
140 +[[image:image-20220622101433-4.png]]
144 144  
145 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622101433-4.png?rev=1.1||alt="image-20220622101433-4.png"]]
142 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
146 146  
144 +[[image:image-20220622102210-5.png||height="504" width="919"]]
147 147  
148 -and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LG01-V2 via Web or Console.
146 +Fill in the WiFi information by checking the box and clicking **Save&Apply**
149 149  
148 +[[image:image-20220622102702-6.png]]
150 150  
151 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102210-5.png?width=919&height=504&rev=1.1||alt="image-20220622102210-5.png"]]
152 -
153 -
154 -Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
155 -
156 -
157 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102702-6.png?rev=1.1||alt="image-20220622102702-6.png"]]
158 -
159 -
160 160  **Wi-Fi configuration successful**
161 161  
152 +[[image:image-20220622102847-7.png]]
162 162  
163 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102847-7.png?rev=1.1||alt="image-20220622102847-7.png"]]
154 +[[image:image-20220622102901-8.png||height="476" width="938"]]
164 164  
165 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?width=938&height=476&rev=1.1||alt="image-20220622102901-8.png"]]
166 166  
167 167  
168 -= **3. Web Configure Pages** =
169 169  
170 -== **3.1 Home** ==
159 += **3. How to configure the LA66 module** =
171 171  
172 -//Shows the system running status~://
173 173  
174 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
162 +== **3.1 Access the LA66 module** ==
175 175  
176 176  
177 -== **3.2 Network Settings** ==
165 +Users can access the LA66 module by running the following command, then select the option **''serial port setup"**:
178 178  
179 -
180 -=== **3.2.1 Network ~-~-> WiFi** ===
181 -
182 -
183 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616114756-4.png?width=669&height=251&rev=1.1||alt="image-20220616114756-4.png"]]
184 -
185 -
186 -
187 -=== **3.4.2 Network ~-~-> System Status** ===
188 -
189 -
190 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820134112-2.png?width=668&height=539&rev=1.1||alt="image-20220820134112-2.png"]]
191 -
192 -
193 -
194 -=== **3.4.3 Network ~-~-> Firewall** ===
195 -
196 -
197 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616115351-6.png?width=661&height=244&rev=1.1||alt="image-20220616115351-6.png"]]
198 -
199 -
200 -
201 -== **3.5 System** ==
202 -
203 -
204 -=== **3.5.1  System ~-~-> System Overview** ===
205 -
206 -
207 -Shows the system info:
208 -
209 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220917144512-5.png?width=853&height=618&rev=1.1||alt="image-20220917144512-5.png"]]
210 -
211 -
212 -
213 -=== **3.5.2 System ~-~-> Backup/Restore** ===
214 -
215 -
216 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220917144725-6.png?width=869&height=208&rev=1.1||alt="image-20220917144725-6.png"]]
217 -
218 -
219 -
220 -= **4. How to configure the Lora Gateway** =
221 -
222 -
223 -== **4.1 Access the Lora configuration page** ==
224 -
225 -
226 -Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**:
227 -
228 228  (% class="box infomessage" %)
229 229  (((
230 230  **root@dragino-2406ef:~~# minicom -s**
... ... @@ -249,165 +249,38 @@
249 249  
250 250  Enter **AT+CFG **in the interface to get the configuration,
251 251  
191 +[[image:image-20221029172156-1.png||height="315" width="358"]]
252 252  
253 -(% class="box infomessage" %)
254 -(((
255 -AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
256 -AT+GROUPMOD=0,0  ~-~--> TX and RX group
257 -AT+BW=0,0  ~-~--> TX and RX Bandwidth
258 -AT+SF=12,12  ~-~--> TX and RX Spreading Factor
259 -AT+POWER=14  ~-~--> TX Power Range
260 -AT+CRC=1,1  ~-~--> TX and RX CRC Type
261 -AT+HEADER=0,0  ~-~--> TX and RX Header Type
262 -AT+CR=1,1  ~-~--> TX and RX Coding Rate
263 -AT+IQ=0,0  ~-~--> TX and RX InvertIQ
264 -AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length
265 -AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
266 -AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
267 -AT+RXDAFORM=1                              
268 -)))
269 269  
194 +LG01v2 Peer to Peer example:
270 270  
271 -== **4.2 Example: LG01**-**V2 Peer-to-Peer** ==
196 +(% style="color:red" %)**LG01v2 as Receiver: (configured as AT+RXMOD=65535,2)**
272 272  
273 273  
274 -[[image:image-20221103152033-7.png||height="281" width="620"]]
275 -
276 -
277 -The user can run the AT command to set the LG01-V2 RX window always open as a Receiver, the LA66 Shield uses **AT+SEND=1,hello world,2,3** to simulate sending data,
278 -
279 -**Prerequisites: **The configuration of LG01-V2 and  LA66 Shield must match, users can use **AT+CFG** to check all configurations.
280 -
281 -
282 -(% style="color:red; font-weight:bold" %)**LG01-V**(% style="color:red" %)**2 as Receiver: (configured as AT+RXMOD=65535,2)**
283 -
284 -[[image:image-20221102140053-4.png]]
285 -
286 -
287 -(% style="color:red" %)**LA66 Shield as Sender: (AT+SEND=1,hello world,2,3)**
288 -
289 -[[image:1667456058832-484.png||height="291" width="353"]]
290 -
291 -
292 -Instruction for Peer-to-Peer firmware:[[ **Instruction **>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]
199 +
293 293  )))
294 294  
202 += **7. Trouble Shooting** =
295 295  
296 -= **5. Build in Server** =
297 297  
205 +== 7.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
298 298  
299 -The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
300 300  
301 301  
302 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820115644-1.png?width=778&height=217&rev=1.1||alt="image-20220820115644-1.png"]]
303 303  
210 +This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
304 304  
305 -(% style="color:red" %)**Note:**
212 +By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
306 306  
307 - **Path**: System ~-~-> Built-in Server
308 308  
215 +So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
309 309  
310 -**Troubleshooting:**
217 +**Click the update URL button to configure the URL with the current eth port address.**
311 311  
312 312  
313 -**~ 1. URL does not jump properly**
314 314  
315 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
316 316  
317 317  
318 -
319 -== **5.1 Application Server ~-~- Node-Red** ==
320 -
321 -
322 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
323 -
324 -
325 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
326 -
327 -
328 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
329 -
330 -
331 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**-V​​​​​​​(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
332 -
333 -
334 -(% style="color:blue" %)**USB TTL to LG01-V2  Connection:**
335 -
336 -
337 -Port 1 of the UART on the LG01-V2 is GND
338 -
339 -(% class="box infomessage" %)
340 -(((
341 -**TXD  <~-~--> UART RXD (Gray line)**
342 -
343 -**RXD  <~-~--> UART TXD (White line)**
344 -
345 -**GND <~-~--> GND (Black line)**
346 -)))
347 -
348 -
349 -**LG01-V2 UART connection photo**
350 -
351 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
352 -
353 -
354 -
355 -In the PC, you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LG01v2. LG01v2 will output system info once power on as below:
356 -
357 -
358 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
359 -
360 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
361 -
362 -
363 -= **7. FAQ** =
364 -
365 -
366 -== **7.1 How does LG01-V2 communicate with Lora shield (LoRa.h)** ==
367 -
368 -
369 -This example describes how to use LG01-V2, LoRa Shield to set up a LoRa network
370 -
371 -[[image:image-20221103152238-8.png||height="251" width="654"]]
372 -
373 -
374 -(% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
375 -
376 -**LG01-V2 configuration:**
377 -
378 -(% class="box infomessage" %)
379 -(((
380 -AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
381 -AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
382 -AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
383 -AT+POWER=14  ~-~--> TX Power Range
384 -AT+CRC=1,1  ~-~--> TX and RX CRC Type
385 -AT+HEADER=0,0  ~-~--> TX and RX Header Type
386 -AT+CR=1,1  ~-~--> TX and RX Coding Rate
387 -AT+IQ=0,0  ~-~--> TX and RX InvertIQ
388 -AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
389 -AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
390 -AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode,RX window always open
391 -AT+RXDAFORM=1    
392 -)))
393 -
394 -**Lora shield configuration:**
395 -
396 -Lora Shield example: [[attach:LoRa_Shield_Sketch_For_MQTT.ino||target="_blank"]] , [[attach:arduino-LoRa-master.zip||target="_blank"]]
397 -
398 -[[image:image-20221101161318-2.png]]
399 -
400 -
401 -**Test LG01-V2 to receive Lora Shield data:**
402 -
403 -[[image:image-20221101161951-3.png]]
404 -
405 -
406 -**Test the LG01-V​​​​​​​2 to send data:**
407 -
408 -[[image:image-20221101162527-4.png]]
409 -
410 -
411 411  = (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
412 412  
413 413  
1667456058832-484.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.0 KB
Content
LoRa_Shield_Sketch_For_MQTT.ino
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -2.9 KB
Content
... ... @@ -1,118 +1,0 @@
1 -#include <SPI.h>
2 -#include <LoRa.h>
3 -
4 -// This is the LoRa Node side sketch for the MQTT example: http://wiki.dragino.com/index.php?title=MQTT_Forward_Instruction#Example_to_communicate_to_a_simple_MQTT_server
5 -
6 -float tem,hum;
7 -char tem_1[8]={"\0"},hum_1[8]={"\0"};
8 -char *node_id = "<4567>"; //From LG01 via web Local Channel settings on MQTT.Please refer <> dataformat in here.
9 -uint8_t datasend[36];
10 -unsigned int count = 1;
11 -unsigned long new_time,old_time=0;
12 -
13 -void setup()
14 -{
15 - Serial.begin(9600);
16 - while (!Serial);
17 - Serial.println(F("Start MQTT Example"));
18 - if (!LoRa.begin(868100000)) //868000000 is frequency
19 - {
20 - Serial.println("Starting LoRa failed!");
21 - while (1);
22 - }
23 - // Setup Spreading Factor (6 ~ 12)
24 - LoRa.setSpreadingFactor(12);
25 -
26 - // Setup BandWidth, option: 7800,10400,15600,20800,31250,41700,62500,125000,250000,500000
27 - //Lower BandWidth for longer distance.
28 - LoRa.setSignalBandwidth(125000);
29 -
30 - // Setup Coding Rate:5(4/5),6(4/6),7(4/7),8(4/8)
31 - LoRa.setCodingRate4(5);
32 - LoRa.setSyncWord(0x12);
33 - void disableCrc();
34 - LoRa.disableInvertIQ();
35 - LoRa.explicitHeaderMode();
36 - Serial.println("LoRa init succeeded.");
37 - LoRa.onReceive(onReceive);
38 - LoRa.receive();
39 -}
40 -
41 -void dhtTem()
42 -{
43 - tem = random(15,40);
44 - hum = random(40,80);
45 - Serial.println(F("The temperature and humidity:"));
46 - Serial.print("[");
47 - Serial.print(tem);
48 - Serial.print("℃");
49 - Serial.print(",");
50 - Serial.print(hum);
51 - Serial.print("%");
52 - Serial.print("]");
53 - Serial.println("");
54 -}
55 -void dhtWrite()
56 -{
57 - char data[50] = "\0";
58 - //for(int i = 0; i < 50; i++)
59 - //{
60 - // data[i] = node_id[i];
61 - //}
62 -
63 - dtostrf(tem,0,1,tem_1);
64 - dtostrf(hum,0,1,hum_1);
65 -
66 - // Serial.println(tem_1);
67 - strcat(data,"tem=");
68 - strcat(data,tem_1);
69 - strcat(data,"&hum=");
70 - strcat(data,hum_1);
71 - strcpy((char *)datasend,data);
72 -
73 - //Serial.println((char *)datasend);
74 - //Serial.println(sizeof datasend);
75 -
76 -}
77 -
78 -
79 -void SendData()
80 -{
81 - LoRa.beginPacket();
82 - LoRa.print((char *)datasend);
83 - LoRa.endPacket();
84 - Serial.println("Packet Sent");
85 -}
86 -
87 -
88 -
89 -void loop()
90 -{
91 - new_time=millis();
92 - if (new_time - old_time >= 30000 || old_time == 0)
93 - {
94 - old_time = new_time;
95 - Serial.print("########### ");
96 - Serial.print("COUNT=");
97 - Serial.print(count);
98 - Serial.println(" ###########");
99 - count++;
100 - dhtTem();
101 - dhtWrite();
102 - SendData();
103 - LoRa.receive();
104 - }
105 -}
106 -
107 -void onReceive(int packetSize) {
108 -
109 - // received a packet
110 - Serial.print("Received packet : ");
111 -
112 - // read packet
113 - for (int i = 0; i < packetSize; i++) {
114 - Serial.print((char)LoRa.read());
115 - }
116 - Serial.print("\n\r");
117 -}
118 -
arduino-LoRa-master.zip
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20221101160705-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -6.1 KB
Content
image-20221101161318-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20221101161951-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -131.0 KB
Content
image-20221101162527-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -290.1 KB
Content
image-20221102105419-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.3 KB
Content
image-20221102110604-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.9 KB
Content
image-20221102114002-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -50.1 KB
Content
image-20221102140053-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20221103140645-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -39.1 KB
Content
image-20221103142228-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.7 KB
Content
image-20221103142416-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -325.9 KB
Content
image-20221103143528-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20221103143618-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20221103144405-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -32.8 KB
Content
image-20221103152033-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20221103152238-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -32.8 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0