Last modified by Kilight Cao on 2024/10/12 08:58
<
From version < 50.1 >
edited by Kilight Cao
on 2022/11/03 14:13
To version < 150.1
edited by Kilight Cao
on 2024/10/12 08:58
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -7,30 +7,39 @@
7 7  
8 8  )))
9 9  
10 -**Table of Contents：**
10 +**Table of Contents:**
11 11  
12 12  {{toc/}}
13 13  
14 -= **1. Introduction** =
15 15  
16 16  
17 -== **1.1 What is LG01v2** ==
18 18  
19 19  
18 +
19 += 1. Introduction =
20 +
21 +== 1.1 What is LG01v2 ==
22 +
23 +
20 20  (((
21 21  (((
22 -The LG01v2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LG01v2 is an (% style="color:blue" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 +
28 +LG01v2 is specially designed for (% style="color:blue" %)**peer-to-peer LoRa**(%%) protocol instead of LoRaWAN protocol. The LG01v2 uses a single-channel LoRa module to minimize the deployment cost for a private p2p LoRa wireless network.
29 +
30 +(% style="color:red" %)**Note: The LG01v2 can't register and connect to the LoRaWAN server(Such as The Things NetWork, AWS, or Chirpstack..)**
23 23  )))
24 24  
25 25  (((
26 -LG01v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
34 +LG01v2 uses Open Source Linux system. User can modify the Linux part and develop customize software base on it. It has (% style="color:blue" %)**1.2Ghz Quad-Core CPU**(%%) , (% style="color:blue" %)**4GB eMMC storage**(%%) and (% style="color:blue" %)**512MB RAM**(%%) for most application.
35 +
36 +LG01v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
27 27  )))
28 28  
29 29  
40 +== 1.2 Specifications ==
30 30  
31 -== **1.2 Specifications** ==
32 32  
33 -
34 34  (% style="color:#037691" %)**Hardware System:**
35 35  
36 36  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -48,7 +48,7 @@
48 48  * Storage Temperature: -20 ~~ 65°C
49 49  * Power Input: 5V, 2A, DC
50 50  
51 -== **1.3 Features** ==
60 +== 1.3 Features ==
52 52  
53 53  
54 54  * Open Source Debian system
... ... @@ -56,175 +56,255 @@
56 56  * Remote Management
57 57  * Auto-provisioning for batch deployment and management
58 58  * LoRa Gateway
59 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
60 60  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
61 61  
62 -== **1.4 Block Diagram** ==
70 +== 1.4 Block Diagram ==
63 63  
64 64  
65 65  
66 -== **1.5 LED Indicators** ==
74 +== 1.5 LED Indicators ==
67 67  
68 68  
69 69  LG01-V2 has totally four LEDs, They are:
70 70  
71 71  
72 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
80 +(% style="color:blue" %)**➢ Power LED**[[image:image-20231014092959-4.png]](%%): This RED LED will be solid if the device is properly powered
73 73  
74 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
82 +(% style="color:blue" %)**➢ ETH LED**[[image:image-20231014092934-2.png]](%%):  This RGB LED will blink GREEN when the ETH port is connecting
75 75  
76 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
84 +(% style="color:blue" %)**➢ SYS LED**[[image:image-20231014092954-3.png]](%%):  Undefined yet. 
77 77  
78 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
86 +(% style="color:blue" %)**➢ WIFI LED**[[image:image-20231014092843-1.png]](%%): This LED shows the WIFI interface connection status.
79 79  
80 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
81 81  
82 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
89 +== 1.6 Button Intruction ==
83 83  
84 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
85 85  
92 +LG01-V2 has a black toggle button, which is:
86 86  
87 87  
88 -== **1.6 Button Intruction** ==
95 +(% style="color:blue" %)**➢ Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
89 89  
97 + **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
90 90  
91 -LG01v2 has a black toggle button, which is:
92 92  
100 +(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
93 93  
94 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
102 + **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
95 95  
96 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
97 97  
105 += 2. Quick Start =
98 98  
99 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
100 100  
101 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
108 +The LG01-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
102 102  
110 +In most cases, the first thing you need to do is make the LG01-v2 accessible to the network.
103 103  
104 104  
105 -= **2. Quick Start** =
113 +== 2.1 Access and Configure LG01-v2 ==
106 106  
115 +=== 2.1.1 Find IP address of LG01-v2 ===
107 107  
108 -The LG01-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
109 109  
110 -In most cases, the first thing you need to do is make the LG01-v2 accessible to the network.
118 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
111 111  
112 112  
113 -== **2.1 Connects to the network and accesses the gateway Web UI** ==
121 +Connect the LG01-V2 Ethernet port to your router and LG01-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01-V2.
114 114  
123 +You can also use this IP to connect.
115 115  
116 -== **2.1.1 connect the network.** ==
117 117  
126 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100129-1.png?width=1263&height=332&rev=1.1||alt="image-20220622100129-1.png"]]
118 118  
119 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
128 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via LG01v2 Fallback IP ====
120 120  
130 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230107084650-2.png?width=839&height=310&rev=1.1||alt="image-20230107084650-2.png" height="284" width="769"]]
121 121  
122 -Connect the LG01v2 Ethernet port to your router and LG01v2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01v2.
123 123  
124 -You can also use this IP to connect.
133 +**Steps to connect via fallback IP:**
125 125  
135 +~1. Connect the PC's Ethernet port to LG01v2's WAN port
126 126  
127 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100129-1.png?width=1263&height=332&rev=1.1||alt="image-20220622100129-1.png"]]
137 +2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
128 128  
139 +**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
129 129  
130 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
131 131  
142 +As in the below photo:
132 132  
133 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100542-2.png?width=1256&height=369&rev=1.1||alt="image-20220622100542-2.png"]]
144 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413172038-1.png?width=1243&height=732&rev=1.1||alt="image-20230413172038-1.png" height="624" width="1059"]]
134 134  
135 -The LG01v2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
136 136  
147 +Configure computer Ethernet port steps video: **[[fallback ip.mp4>>url:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/fallback%20ip.mp4?rev=1.1]]**
137 137  
138 -(% style="color:#037691" %)**Steps to connect via fallback IP:**
149 +If you still can't access the LG01v2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/LG01v2/#H10.1A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
139 139  
140 -~1. Connect PC's Ethernet port to LG01-V2's WAN port
151 +3. In the PC, use IP address 172.31.255.254 to access the LG01v2 via Web or Console.
141 141  
142 -2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
153 +[[image:image-20230506115438-13.png||height="554" width="1047"]]
143 143  
144 144  
145 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622101433-4.png?rev=1.1||alt="image-20220622101433-4.png"]]
146 146  
157 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ====
147 147  
148 -and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LG01-V2 via Web or Console.
149 149  
160 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100542-2.png?width=1256&height=369&rev=1.1||alt="image-20220622100542-2.png"]]
150 150  
151 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102210-5.png?width=919&height=504&rev=1.1||alt="image-20220622102210-5.png"]]
152 152  
153 -
154 154  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
155 155  
156 156  
157 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102702-6.png?rev=1.1||alt="image-20220622102702-6.png"]]
166 +[[image:image-20230506113332-2.png]]
158 158  
159 159  
160 160  **Wi-Fi configuration successful**
161 161  
162 162  
163 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102847-7.png?rev=1.1||alt="image-20220622102847-7.png"]]
172 +[[image:image-20230506113432-3.png||height="397" width="855"]]
164 164  
165 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?width=938&height=476&rev=1.1||alt="image-20220622102901-8.png"]]
166 166  
175 +=== 2.1.2 Access Configure Web UI ===
167 167  
168 -= **3. Web Configure Pages** =
169 169  
170 -== **3.1 Home** ==
178 +**Web Interface**
171 171  
172 -//Shows the system running status~://
180 +Open a browser on the PC and type the LG01v2 ip address (depends on your connect method)
173 173  
174 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
175 175  
183 +[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
176 176  
177 -== **3.2 Network Settings** ==
185 +You will see the login interface of LG01v2 as shown below.
178 178  
187 +The account details for Web Login are:
179 179  
180 -=== **3.2.1 Network ~-~-> WiFi** ===
189 +(% style="color:#4f81bd" %)**User Name: root**
181 181  
191 +(% style="color:#4f81bd" %)**Password:   dragino**
182 182  
183 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616114756-4.png?width=669&height=251&rev=1.1||alt="image-20220616114756-4.png"]]
193 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230106153501-1.png?width=894&height=367&rev=1.1||alt="image-20230106153501-1.png"]]
184 184  
185 185  
196 += 3. Web Configure Pages =
186 186  
187 -=== **3.4.2 Network ~-~-> System Status** ===
198 +== 3.1 Home ==
188 188  
189 189  
190 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820134112-2.png?width=668&height=539&rev=1.1||alt="image-20220820134112-2.png"]]
201 +Shows the system running status:
191 191  
203 +[[image:image-20230506113531-4.png||height="430" width="818"]]
192 192  
193 193  
194 -=== **3.4.3 Network ~-~-> Firewall** ===
206 +== 3.2 Network Settings ==
195 195  
208 +=== 3.2.1 Network ~-~-> WiFi ===
196 196  
197 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616115351-6.png?width=661&height=244&rev=1.1||alt="image-20220616115351-6.png"]]
198 198  
211 +[[image:image-20230506113602-5.png]]
199 199  
200 200  
201 -== **3.5 System** ==
214 +=== 3.4.2 Network ~-~-> System Status ===
202 202  
203 203  
204 -=== **3.5.1  System ~-~-> System Overview** ===
217 +[[image:image-20230506113623-6.png||height="511" width="672"]]
205 205  
206 206  
220 +== 3.5 System ==
221 +
222 +=== 3.5.1  System ~-~-> System Overview ===
223 +
224 +
207 207  Shows the system info:
208 208  
209 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220917144512-5.png?width=853&height=618&rev=1.1||alt="image-20220917144512-5.png"]]
227 +[[image:image-20230506113705-7.png]]
210 210  
211 211  
230 +=== 3.5.2 System ~-~-> Backup/Restore ===
212 212  
213 -=== **3.5.2 System ~-~-> Backup/Restore** ===
214 214  
233 +[[image:image-20230506113722-8.png||height="254" width="797"]]
215 215  
216 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220917144725-6.png?width=869&height=208&rev=1.1||alt="image-20220917144725-6.png"]]
217 217  
236 +=== 3.5.3 System ~-~-> System General ===
218 218  
219 219  
220 -= **4. How to configure the Lora Gateway** =
239 +In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
221 221  
241 +In addition, Users can customize the FallBack IP address.
222 222  
223 -== **4.1 Access the Lora configuration page** ==
243 +[[image:image-20230506113813-10.png||height="659" width="749"]]
224 224  
225 225  
226 -Users can access the LA66 module by running the following command, then select the option **''serial port setup"**:
246 +=== 3.5.4 System ~-~-> Remoteit ===
227 227  
248 +
249 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
250 +
251 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
252 +
253 +[[image:image-20230506113831-11.png||height="567" width="748"]]
254 +
255 +
256 +=== 3.5.5 System ~-~-> Package Management ===
257 +
258 +
259 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
260 +
261 +[[image:image-20230506114127-12.png||height="803" width="762"]]
262 +
263 +
264 += (% id="cke_bm_1978S" style="display:none" %) (%%)4. Build in Server =
265 +
266 +
267 +The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
268 +
269 +
270 +[[image:image-20230506113737-9.png]]
271 +
272 +
273 +(% style="color:red" %)**Note:**
274 +
275 + **Path**: System ~-~-> Built-in Server
276 +
277 +
278 +(% style="color:blue" %)**Troubleshooting：**
279 +
280 +**~ 1. URL does not jump properly**
281 +
282 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
283 +
284 +
285 +== 4.1 Application Server ~-~- Node-Red ==
286 +
287 +
288 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
289 +
290 +
291 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
292 +
293 +
294 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
295 +
296 +
297 += 5. How to configure the Lora Gateway =
298 +
299 +== 5.1 Configure and Debug LoRa wireless of LG01v2 ==
300 +
301 +
302 +First, the user needs to access the Linux console of LG01v2 via ssh
303 +
304 +**IP address:  (% style="color:blue" %)IP address of LG01v2(%%)**
305 +
306 +**Port:  (% style="color:blue" %)22(%%)**
307 +
308 +**User Name:   (% style="color:blue" %)root(%%)**
309 +
310 +**Password:  (% style="color:blue" %)dragino(default)(%%)**
311 +
312 +[[image:image-20230504100722-3.png||height="228" width="908"]]
313 +
314 +
315 +Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**:
316 +
228 228  (% class="box infomessage" %)
229 229  (((
230 230  **root@dragino-2406ef:~~# minicom -s**
... ... @@ -243,7 +243,9 @@
243 243  )))
244 244  
245 245  
246 -(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**(%%)
335 +(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**
336 +
337 +
247 247  (% style="color:red" %)[[image:image-20221029174703-3.png]]
248 248  
249 249  
... ... @@ -252,86 +252,186 @@
252 252  
253 253  (% class="box infomessage" %)
254 254  (((
255 -AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
256 -AT+GROUPMOD=0,0  ~-~--> TX and RX group
257 -AT+BW=0,0  ~-~--> TX and RX Bandwidth
258 -AT+SF=12,12  ~-~--> TX and RX Spreading Factor
259 -AT+POWER=14  ~-~--> TX Power Range
346 +**AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
347 +AT+GROUPMOD=0,0  ~-~-->  TX and RX group
348 +AT+BW=0,0  ~-~-->  TX and RX Bandwidth
349 +AT+SF=12,12  ~-~-->  TX and RX Spreading Factor
350 +AT+POWER=14  ~-~-->  TX Power Range
351 +AT+CRC=1,1  ~-~-->  TX and RX CRC Type
352 +AT+HEADER=0,0  ~-~-->  TX and RX Header Type
353 +AT+CR=1,1  ~-~-->  TX and RX Coding Rate
354 +AT+IQ=0,0  ~-~-->  TX and RX InvertIQ
355 +AT+PREAMBLE=8,8  ~-~-->  TX and RX Preamble Length
356 +AT+SYNCWORD=0  ~-~-->  Syncword(0: private，1: public)
357 +AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
358 +AT+RXDAFORM=1**                              
359 +)))
360 +
361 +
362 +== 5.2 Example: LG01v2 ==
363 +
364 +=== 5.2.1 Introduce for the example: ===
365 +
366 +
367 +[[image:image-20221104102736-3.png||height="282" width="723"]]
368 +
369 +
370 +In this example, there are two devices:
371 +
372 +* **LA66 Shield + UNO + DHT11**: The UNO will get the temperature and humidity and broadcast the value via LoRa protocol.
373 +* **LG01v2** : LG01v2 is set to listening the LoRa Channel which LA66 is broadcasting. When LG01v2 get the data from LA66, LG01v2 will plot the data in built-in IoT server.
374 +
375 +=== 5.2.2 Set Up LA66 Shield + UNO ===
376 +
377 +
378 +==== **Set up LA66 Module** ====
379 +
380 +
381 +LA66 Module is loaded with the firmware **[[LA66 Peer-to-Peer firmware>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]] **and user can use AT Command to set up LA66 with below parameters:
382 +
383 +(((
384 +(% style="color:red" %)**LA66 Shield as Sender: **
385 +
386 +(% class="box infomessage" %)
387 +(((
388 +**LA66 Shield configuration:**
389 +
390 +AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
391 +AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
392 +AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
393 +AT+POWER=14  ~-~--> TX Power Range set: 14dBm
260 260  AT+CRC=1,1  ~-~--> TX and RX CRC Type
261 261  AT+HEADER=0,0  ~-~--> TX and RX Header Type
262 262  AT+CR=1,1  ~-~--> TX and RX Coding Rate
263 263  AT+IQ=0,0  ~-~--> TX and RX InvertIQ
264 -AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length
398 +AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
265 265  AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
266 -AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
267 -AT+RXDAFORM=1                              
400 +AT+RXMOD=6,0  ~-~-->  Rx Timeout and Reply mode
268 268  )))
402 +)))
269 269  
270 270  
271 -== **4.2 Example: LG01v2 Peer-to-Peer** ==
272 272  
406 +==== **Set up Arduino UNO** ====
273 273  
274 -[[image:image-20221103140645-1.png]]
408 +(% id="cke_bm_1033249S" style="display:none" %)** **
275 275  
276 -The user can run the AT command to set the LG01v2 RX window always open as a Receiver, the Sender uses **AT+SEND=1,hello world,2,3** to simulate sending data,
410 +**Hardware Connection**
277 277  
278 -**Prerequisites: **The configuration of LG01v2 and Sender must match, users can use **AT+CFG** to check all configurations.
412 +(% class="box infomessage" %)
413 +(((
414 +**The DHT11 sensor connects to the LA66 Shield:**
279 279  
416 +**VCC  <~-~--> 3.3V (Red line)**
417 +**DATA <~-~--> PIN8 (Purple line)**
418 +**GND  <~-~--> GND (White line)**
419 +)))
280 280  
281 -(% style="color:red" %)**LG01v2 as Receiver: (configured as AT+RXMOD=65535,2)**
421 +[[image:image-20221108170731-5.png||height="588" width="441"]]
282 282  
283 -[[image:image-20221102140053-4.png]]
284 284  
285 285  
286 -(% style="color:red" %)**Sender: (AT+SEND=1,hello world,2,3)**
425 +===== **1. Open Arduino IDE** =====
287 287  
288 -[[image:image-20221031092053-4.png]]
289 289  
428 +[[image:image-20221108172149-6.png||height="650" width="542"]]
290 290  
291 -Instruction for Peer-to-Peer firmware:[[ **Instruction **>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]
430 +
431 +
432 +===== **2. Open project** =====
433 +
434 +
435 +Users can download Arduino files from this link: [[attach:Log-Temperature-Sensor-and-send-data-to-Node-red.ino||target="_blank"]]
436 +
437 +Then click Compile and Upload to LA66 Shield,
438 +
439 +[[image:image-20221108172432-7.png]]
440 +
441 +
442 +
443 +===== **3. Open the Serial Monitor to check the LA66 Shield data** =====
444 +
445 +
446 +The UNO will now reads the temperature and humidity data from the sensor and broadcast it via LoRa wireless,
447 +
448 +[[image:image-20221108174840-8.png||height="731" width="671"]]
449 +
450 +
451 +
452 +Sending out data as below.
453 +
454 +[[image:image-20221108175113-9.png||height="556" width="998"]]
455 +
456 +
457 +=== 5.2.3 Set Up LG01v2 ===
458 +
459 +
460 +Configure LG01v2 LoRa channel parameters so it can get data from LA66 Shield
461 +
462 +(% style="color:red; font-weight:bold" %)**LG01v**(% style="color:red" %)**2 as Receiver: (configured as AT+RXMOD=65535,2)**
463 +
464 +(% class="box infomessage" %)
465 +(((
466 +**LG01-V2 configuration:**
467 +
468 +AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
469 +AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
470 +AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
471 +AT+POWER=14  ~-~--> TX Power Range set: 14dBm
472 +AT+CRC=1,1  ~-~--> TX and RX CRC Type
473 +AT+HEADER=0,0  ~-~--> TX and RX Header Type
474 +AT+CR=1,1  ~-~--> TX and RX Coding Rate
475 +AT+IQ=0,0  ~-~--> TX and RX InvertIQ
476 +AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
477 +AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
478 +AT+RXMOD=65535,2  ~-~-->  Rx Timeout and Reply mode, RX window always open**(0:No ACK, 1:Reply mode, 2:Send an ACK once got a message from another device. ACK Content is 0x00 FF )**
292 292  )))
293 293  
294 294  
295 -= **5. Build in Server** =
482 +=== 5.2.4 Test result ===
296 296  
297 297  
298 -The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
485 +After the above configuration is complete, users can send test simulation data to check whether the configuration is correct, In LA66 sheild serial console send:(% style="color:red" %)**(AT+SEND=1,hello world,2,3).**
486 +)))
299 299  
488 +When LG01v2 replies with ACK when it receives a packet sent by LA66 sheild.
300 300  
301 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820115644-1.png?width=778&height=217&rev=1.1||alt="image-20220820115644-1.png"]]
490 +[[image:image-20221108164413-2.png]]
302 302  
303 303  
304 -(% style="color:red" %)**Note:**
305 305  
306 - **Path**: System ~-~-> Built-in Server
494 +In the real-time log of LG01v2：
307 307  
496 +[[image:image-20221108170314-3.png]]
308 308  
309 -**Troubleshooting:**
310 310  
499 +=== 5.2.5 Plot data chart in LG01v2 ===
311 311  
312 -**~ 1. URL does not jump properly**
313 313  
314 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
502 +User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
315 315  
504 +User can import this example in Node-Red: [[attach:Log-Temperature-Sensor-and-send-data-to-Node-red.json||target="_blank"]]
316 316  
506 +[[image:image-20221108180334-10.png||height="651" width="1141"]]
317 317  
318 -== **5.1 Application Server ~-~- Node-Red** ==
319 319  
509 +The temperature and humidity chart is displayed in the built-in node-red UI
320 320  
321 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
511 +**Browser input: (% style="background-color:yellow" %)__//http:~/~/<local-IPV4-address>//__(%%)**
322 322  
513 +[[image:image-20221108180458-11.png||height="402" width="1137"]]
323 323  
324 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
325 325  
326 326  
327 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
517 += 6. OTA System Update =
328 328  
329 329  
330 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01v2 using serial USB**(%%) =
520 +LG01v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
331 331  
332 332  
333 -(% style="color:blue" %)**USB TTL to LG01v2  Connection:**
523 += 7. How users can access LG01v2 using serial USB =
334 334  
525 +**USB TTL to LG01v2  Connection:**
335 335  
336 336  Port 1 of the UART on the LG01v2 is GND
337 337  
... ... @@ -344,27 +344,27 @@
344 344  **GND <~-~--> GND (Black line)**
345 345  )))
346 346  
347 -
348 348  **LG01v2 UART connection photo**
349 349  
350 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
540 +[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230421094319-2.png?width=392&height=351&rev=1.1||alt="image-20230421094319-2.png"]]
351 351  
542 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
352 352  
544 +[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
353 353  
354 -In the PC, you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LG01v2. LG01v2 will output system info once power on as below:
546 +[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
355 355  
356 356  
357 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
549 += 8. FAQ =
358 358  
359 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
551 +== 8.1 How does LG01v2 communicate with Lora shield (LoRa.h) ==
360 360  
361 361  
362 -= **7. FAQ** =
554 +This example describes how to use LG01v2, LoRa Shield to set up a LoRa network,
363 363  
556 +[[image:image-20221103152238-8.png||height="251" width="654"]]
364 364  
365 -== **7.1 How does LG01v2 communicate with Lora shield (LoRa.h)** ==
366 366  
367 -
368 368  (% style="color:red" %)**Prerequisites: The configurations of LG01v2 and Lora shield must match**
369 369  
370 370  **LG01v2 configuration:**
... ... @@ -371,20 +371,22 @@
371 371  
372 372  (% class="box infomessage" %)
373 373  (((
374 -AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set :868100000
375 -AT+BW=0,0  ~-~--> TX and RX Bandwidth set : 125kHz
376 -AT+SF=12,12  ~-~--> TX and RX Spreading Factor
565 +AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
566 +AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
567 +AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
377 377  AT+POWER=14  ~-~--> TX Power Range
378 378  AT+CRC=1,1  ~-~--> TX and RX CRC Type
379 379  AT+HEADER=0,0  ~-~--> TX and RX Header Type
380 380  AT+CR=1,1  ~-~--> TX and RX Coding Rate
381 381  AT+IQ=0,0  ~-~--> TX and RX InvertIQ
382 -AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length
383 -AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
384 -AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
573 +AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
574 +AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
575 +AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode,RX window always open
385 385  AT+RXDAFORM=1    
386 386  )))
387 387  
579 +
580 +
388 388  **Lora shield configuration:**
389 389  
390 390  Lora Shield example: [[attach:LoRa_Shield_Sketch_For_MQTT.ino||target="_blank"]] , [[attach:arduino-LoRa-master.zip||target="_blank"]]
... ... @@ -392,65 +392,199 @@
392 392  [[image:image-20221101161318-2.png]]
393 393  
394 394  
588 +
395 395  **Test LG01v2 to receive Lora Shield data:**
396 396  
397 397  [[image:image-20221101161951-3.png]]
398 398  
399 399  
594 +
400 400  **Test the LG01v2 to send data:**
401 401  
402 402  [[image:image-20221101162527-4.png]]
403 403  
404 404  
405 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
600 +== 8.2 How does LG01v2 communicate with Heltec LoRa Node ==
406 406  
407 407  
603 +This example describes how to use LG01v2 and Heltec LoRa Node to set up a LoRa network,
604 +
605 +[[image:image-20221112161111-2.png||height="258" width="692"]]
606 +
607 +(% style="color:red" %)**Prerequisites: The configurations of LG01v2 and Lora shield must match**
608 +
609 +
610 +**LG01v2 configuration:**
611 +
612 +(% class="box infomessage" %)
408 408  (((
409 -**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
614 +AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
615 +AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
616 +AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
617 +AT+POWER=14  ~-~--> TX Power Range
618 +AT+CRC=1,1  ~-~--> TX and RX CRC Type
619 +AT+HEADER=0,0  ~-~--> TX and RX Header Type
620 +AT+CR=1,1  ~-~--> TX and RX Coding Rate
621 +AT+IQ=0,0  ~-~--> TX and RX InvertIQ
622 +AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
623 +AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
624 +AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode,RX window always open
625 +AT+RXDAFORM=1  ~-~--> RX data format**（0: Hex ,1: String）**
410 410  )))
411 411  
628 +
629 +After we upload the sketch to Heltec LoRa Node, we can see below output from Arduino.
630 +
631 +Lora Shield example: [[attach:LoRa_send_trial.ino||target="_blank"]]
632 +
633 +[[image:image-20221112162733-3.png||height="524" width="927"]]
634 +
635 +
636 +And we can see the logread of gateway as below, means the packet arrive gateway:
637 +
638 +[[image:image-20221112163119-4.png||height="808" width="560"]]
639 +
640 +
641 +== 8.3 How does LG01v2 communicate with LoRaWAN node ==
642 +
643 +
644 +This example describes how to use LG01v2 and LSN50 to set up a  network,
645 +
646 +In this case, users need to set LSN50 to work in ABP mode and transmit in only one frequency.
647 +
648 +Assume we have a LG01v2 working in the frequency 868100000 now, below is the steps.
649 +
650 +
651 +**Step1: **Configure the LG01v2
652 +
653 +(% class="box infomessage" %)
412 412  (((
413 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
655 +AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
656 +AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
657 +AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
658 +AT+SYNCWORD=1  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
659 +)))
414 414  
661 +**Step2:  **Run AT commands to make the LSN50 work in Single frequency and ABP mode.
415 415  
663 +For more information on how to use AT commands in LSN50v2, please refer to this link: [[LSN50v2-S31-S31B Use AT Command>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/#H4.A0UseATCommand]]
416 416  
417 -= **9. Reference** =
665 +Below are the AT commands:
418 418  
667 +(% class="box infomessage" %)
668 +(((
669 +AT+FDR  ~-~--> Reset Parameters to Factory Default, Keys Reserve
670 +AT+NJM=0  ~-~-->  Set to ABP mode
671 +AT+ADR=0  ~-~-->  Set the Adaptive Data Rate Off
672 +AT+DR=0  ~-~--> Set Data Rate (Set AT+DR=3 for 915 band)
673 +AT+TDC=300000  ~-~-->  Set transmit interval to 5 minutes
674 +AT+CHS=868100000  ~-~--> Set transmit frequency to 868.1Mhz
675 +AT+DADDR=FFFFF111  ~-~--> Set Device Address to 26 01 1A F1
676 +ATZ  ~-~--> Reset MCU
677 +)))
419 419  
420 -* Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
421 -* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
679 +**Step3:  **Check result
422 422  
681 +
682 +
683 +User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
684 +
685 +User can import this example in Node-Red: [[attach:LG01v2_LSN50v2_S31.json||target="_blank"]]
686 +
687 +
688 +First the user needs to fill in the NwkSkey and AppSkey in the LoraWan Packet Decrypter node.
689 +
690 +[[image:image-20230620103535-2.png||height="591" width="1138"]]
691 +
692 +[[image:image-20230620103153-1.png||height="610" width="1141"]]
693 +
694 +
695 +The data will be displayed in the built-in node-red UI
696 +
697 +**Browser input: (% style="background-color:yellow" %)__//http:~/~/<local-IPV4-address>//__(%%)**
698 +
699 +[[image:image-20230620103923-3.png||height="476" width="1138"]]
700 +
701 +
702 +== 8.4 How can users factory reset LG01v2 ==
703 +
704 +
705 +Users can download the image of LG01v2 from this link：[[dragino-lg01v2-1.7-0210>>https://www.dropbox.com/scl/fi/g0si61lcrvdjyto4ma951/dragino-lg01v2-1.7-0210.zip?rlkey=t03oqo493r2p7ign488rs2jsv&dl=0]]
706 +
707 +
708 +Then follow the steps in the link below to restore factory Settings to LG01v2：
709 +
710 +[[How to flash a new image(OS) to the gateway>>url:https://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
711 +
712 +
713 += 9. Trouble Shooting =
714 +
715 +== 9.1  Fallback IP does not work, how can users check ==
716 +
717 +
718 +When the computer has completed the above fallback IP configuration,the LG01v2 Web UI is still not accessible via fallback IP.
719 +
720 +
721 +**1.Check whether the configuration is correct**
722 +
723 +Run the CMD command to ipconfig and ping 172.31.255.254.
724 +
725 +If this fails, the user needs to reconfigure.
726 +
727 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413170224-3.png?width=707&height=433&rev=1.1||alt="image-20230413170224-3.png"]]
728 +
729 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413170246-4.png?rev=1.1||alt="image-20230413170246-4.png"]]
730 +
731 +
732 +**2. Check whether the firewall is disabled**
733 +
734 +If the firewall is not down, this will affect access to the gateway.
735 +
736 +
737 += (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
738 +
739 +
740 +(((
741 +If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
742 +)))
743 +
744 +(((
745 +With your question as detailed as possible. We will reply and help you in the shortest.
746 +
747 +
748 += 11. Reference =
749 +
750 +
751 +* Install Tago Core: Refer **Install Tago Core in LG01v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
752 +
753 +* [[Advance OS Reference Guide for L>>doc:Main.Armbian OS instruction.WebHome]]G01v2.
754 +
423 423  
424 424  )))
425 425  
426 -= **10. Order Info** =
758 += 12. Order Info =
427 427  
428 428  
429 -(% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
761 +(% style="color:#0000ff" %)**LG01v2-XXX-YYY**
430 430  
431 431  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
432 432  
433 -* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
434 -* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
435 -* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
436 -* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
437 -* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
438 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
765 +* (% style="color:red" %)**868**(%%): For frequency : 863 ~~ 870Mhz
766 +* (% style="color:red" %)**915**(%%): For frequency : 902 ~~ 928Mhz
439 439  
440 440  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
441 441  
442 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
443 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
444 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
445 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
770 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
771 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America: Verizon, AT&T(FirstNet), U.S.Cellular; Canada: Telus
772 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
773 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
446 446  
447 447  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
448 448  
449 449  
778 += 13. Manufacturer Info =
450 450  
451 -= **10. Manufacturer Info** =
452 452  
453 -
454 454  **Shenzhen Dragino Technology Development co. LTD**
455 455  
456 456  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -458,10 +458,9 @@
458 458  LongCheng Street, LongGang District ; Shenzhen 518116,China
459 459  
460 460  
788 += 14. FCC Warning =
461 461  
462 -= **11. FCC Warning** =
463 463  
464 -
465 465  (((
466 466  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
467 467  )))
... ... @@ -491,7 +491,6 @@
491 491  (((
492 492  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
493 493  
820 +
494 494  
495 495  )))
496 -
497 -~)~)~)
1667456058832-484.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.0 KB
Content
LG01v2_LSN50v2_S31.json
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +16.5 KB
Content
... ... @@ -1,0 +1,587 @@
1 +[
2 + {
3 + "id": "5e07f5eeeb2a969b",
4 + "type": "tab",
5 + "label": "流程 1",
6 + "disabled": false,
7 + "info": "",
8 + "env": []
9 + },
10 + {
11 + "id": "9c26fa2f19e2b556",
12 + "type": "function",
13 + "z": "5e07f5eeeb2a969b",
14 + "name": "hex to base64",
15 + "func": "var input = msg.payload;\nvar base64 = Buffer.from(input, 'hex').toString('base64');\nmsg.payload = base64;\nreturn msg;",
16 + "outputs": 1,
17 + "noerr": 0,
18 + "initialize": "",
19 + "finalize": "",
20 + "libs": [],
21 + "x": 220,
22 + "y": 160,
23 + "wires": [
24 + [
25 + "075bc9172a4c6570",
26 + "3601a98894805fbe"
27 + ]
28 + ]
29 + },
30 + {
31 + "id": "ee0480c81e66d657",
32 + "type": "function",
33 + "z": "5e07f5eeeb2a969b",
34 + "name": "function 4",
35 + "func": "var bytes = msg.payload[\"uplink_message\"]\nvar data = msg.payload[\"out\"]\nvar mode = (parseInt(data.substring(12, 14), 16) & 0x7C) >> 2;\nif (mode != 2)\n{\nvar bat = (parseInt(data.substring(0,4),16)&0x3FFF)/1000;\nvar TempC1 = (parseFloat(parseInt(data.substring(4, 8),16)/10).toFixed(2));\nvar ADC_CH0V = (parseInt(data.substring(8, 12), 16) ) / 1000;\nvar Digital_IStatus = (parseInt((data.substring(8, 12),16) & 0x02))?\"H\":\"L\"; \n\nif (mode != 6) {\n\n var EXTI_Trigger = ((parseInt(data.substring(12, 14), 16) & 0x01))? \"TRUE\" : \"FALSE\";\n\n var Door_status = ((parseInt(data.substring(12, 14), 16) & 0x80))? \"CLOSE\" : \"OPEN\";\n\n}\n}\nif (mode == 0) {\n\n var Work_mode = \"IIC\";\n\n if ((parseInt(data.substring(18, 22), 16)) == 0){\n\n var Illum = (parseInt(data.substring(8, 12), 16));\n\n }\n\n else {\n\n var TempC_SHT = parseFloat(((parseInt(data.substring(14, 18), 16)) / 10).toFixed(2));\n\n var Hum_SHT = parseFloat((((parseInt(data.substring(18, 22), 16))) / 10).toFixed(1));\n\n }\n \n}\n\nelse if (mode == 1) {\n\n var Work_mode = \" Distance\";\n\n var Distance_cm = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(1));\n\n if (((parseInt(data.substring(18, 22), 16))) != 65535){\n\n var Distance_signal_strength = parseFloat(((parseInt(data.substring(18, 22), 16))).toFixed(0));\n\n }\n\n}\n\nelse if (mode == 2) {\n\n var Work_mode = \" 3ADC\";\n\n var BatV = (parseInt(data.substring(18, 22), 16)) / 10;\n\n var ADC_CH0V = ((parseInt(data.substring(0, 4), 16))) / 1000;\n\n var ADC_CH1V = ((parseInt(data.substring(4, 8), 16))) / 1000;\n\n var ADC_CH4V = ((parseInt(data.substring(8, 12), 16))) / 1000;\n\n var Digital_IStatus = ((parseInt(data.substring(12, 14), 16)) & 0x02) ? \"H\" : \"L\";\n\n var EXTI_Trigger = ((parseInt(data.substring(12, 14), 16)) & 0x01) ? \"TRUE\" : \"FALSE\";\n\n var Door_status = ((parseInt(data.substring(13, 14), 16)) & 0x80) ? \"CLOSE\" : \"OPEN\";\n\n if ((parseInt(data.substring(18, 22), 16) === 0)) {\n\n var Illum = ((parseInt(data.substring(14, 18), 16)));\n\n }\n\n else {\n\n var TempC_SHT = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(2));\n\n var Hum_SHT = parseFloat((((parseInt(data.substring(18, 24), 16))) / 10).toFixed(1));\n\n }\n\n}\n\nelse if (mode == 3) {\n\n var Work_mode = \"3DS18B20\";\n\n var TempC2 = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(2));\n\n var TempC3 = parseFloat((((parseInt(data.substring(18, 24), 16))) / 10).toFixed(1));\n\n\n\n}\n\nelse if (mode == 4) {\n\n var Work_mode = \"Weight\";\n\n var Weight = ((parseInt(data.substring(14, 18), 16)));\n\n}\n\nelse if (mode == 5) {\n\n var Work_mode = \"Count\";\n\n var Count = ((parseInt(data.substring(14, 22), 16)));\n\n}\n\n\n\nvar b = { payload: bat }, c = { payload: TempC1 }, d = { payload: ADC_CH0V }, e = { payload: Digital_IStatus }, f = { payload: EXTI_Trigger }, g = { payload: Door_status }, j = { payload: TempC_SHT }, s = { payload: Hum_SHT }, k = { payload: Work_mode };\nreturn [b,c,d,e,f,g,j,k,s];",
36 + "outputs": 9,
37 + "noerr": 0,
38 + "initialize": "",
39 + "finalize": "",
40 + "libs": [],
41 + "x": 660,
42 + "y": 300,
43 + "wires": [
44 + [
45 + "fd22b92d2b8de0fb"
46 + ],
47 + [
48 + "3307256a4e1ea53a"
49 + ],
50 + [
51 + "a3fd8302ec399e31"
52 + ],
53 + [
54 + "c7d1f63ff5f0026a"
55 + ],
56 + [
57 + "159967056da52706"
58 + ],
59 + [
60 + "a21581a41adc1714"
61 + ],
62 + [
63 + "7bb78b78445ac9e3"
64 + ],
65 + [
66 + "0364752170ed6228"
67 + ],
68 + [
69 + "65293155d71d54b9"
70 + ]
71 + ]
72 + },
73 + {
74 + "id": "e763b293d42dbdd5",
75 + "type": "change",
76 + "z": "5e07f5eeeb2a969b",
77 + "name": "",
78 + "rules": [
79 + {
80 + "t": "change",
81 + "p": "payload",
82 + "pt": "msg",
83 + "from": "Data: (HEX:)",
84 + "fromt": "str",
85 + "to": "",
86 + "tot": "str"
87 + },
88 + {
89 + "t": "change",
90 + "p": "payload",
91 + "pt": "msg",
92 + "from": " ",
93 + "fromt": "str",
94 + "to": "",
95 + "tot": "str"
96 + }
97 + ],
98 + "action": "",
99 + "property": "",
100 + "from": "",
101 + "to": "",
102 + "reg": false,
103 + "x": 420,
104 + "y": 60,
105 + "wires": [
106 + [
107 + "9c26fa2f19e2b556",
108 + "416a930e89291528"
109 + ]
110 + ]
111 + },
112 + {
113 + "id": "075bc9172a4c6570",
114 + "type": "lorawan-packet-decrypt-nwkey-appkey",
115 + "z": "5e07f5eeeb2a969b",
116 + "name": "FFFFF111",
117 + "nsw": "CCFFFFFFFFFFFFFFFFFFFFFFFFFFFFAA",
118 + "asw": "FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCC",
119 + "x": 510,
120 + "y": 160,
121 + "wires": [
122 + [
123 + "ee0480c81e66d657"
124 + ]
125 + ]
126 + },
127 + {
128 + "id": "13dc77a4e2bb4f72",
129 + "type": "serial in",
130 + "z": "5e07f5eeeb2a969b",
131 + "name": "",
132 + "serial": "bb1c0e81fd51fa9e",
133 + "x": 190,
134 + "y": 60,
135 + "wires": [
136 + [
137 + "e763b293d42dbdd5"
138 + ]
139 + ]
140 + },
141 + {
142 + "id": "3307256a4e1ea53a",
143 + "type": "ui_chart",
144 + "z": "5e07f5eeeb2a969b",
145 + "name": "",
146 + "group": "c1fddd37879528e5",
147 + "order": 1,
148 + "width": 0,
149 + "height": 0,
150 + "label": "TempC1",
151 + "chartType": "line",
152 + "legend": "false",
153 + "xformat": "HH:mm:ss",
154 + "interpolate": "linear",
155 + "nodata": "",
156 + "dot": false,
157 + "ymin": "",
158 + "ymax": "",
159 + "removeOlder": 1,
160 + "removeOlderPoints": "",
161 + "removeOlderUnit": "3600",
162 + "cutout": 0,
163 + "useOneColor": false,
164 + "useUTC": false,
165 + "colors": [
166 + "#1f77b4",
167 + "#aec7e8",
168 + "#ff7f0e",
169 + "#2ca02c",
170 + "#98df8a",
171 + "#d62728",
172 + "#ff9896",
173 + "#9467bd",
174 + "#c5b0d5"
175 + ],
176 + "outputs": 1,
177 + "useDifferentColor": false,
178 + "className": "",
179 + "x": 940,
180 + "y": 160,
181 + "wires": [
182 + []
183 + ]
184 + },
185 + {
186 + "id": "a3fd8302ec399e31",
187 + "type": "ui_chart",
188 + "z": "5e07f5eeeb2a969b",
189 + "name": "",
190 + "group": "6d46fdae9f413f7b",
191 + "order": 1,
192 + "width": 0,
193 + "height": 0,
194 + "label": "ADC_CH0V",
195 + "chartType": "line",
196 + "legend": "false",
197 + "xformat": "HH:mm:ss",
198 + "interpolate": "linear",
199 + "nodata": "",
200 + "dot": false,
201 + "ymin": "",
202 + "ymax": "",
203 + "removeOlder": 1,
204 + "removeOlderPoints": "",
205 + "removeOlderUnit": "3600",
206 + "cutout": 0,
207 + "useOneColor": false,
208 + "useUTC": false,
209 + "colors": [
210 + "#1f77b4",
211 + "#aec7e8",
212 + "#ff7f0e",
213 + "#2ca02c",
214 + "#98df8a",
215 + "#d62728",
216 + "#ff9896",
217 + "#9467bd",
218 + "#c5b0d5"
219 + ],
220 + "outputs": 1,
221 + "useDifferentColor": false,
222 + "className": "",
223 + "x": 950,
224 + "y": 200,
225 + "wires": [
226 + []
227 + ]
228 + },
229 + {
230 + "id": "fd22b92d2b8de0fb",
231 + "type": "ui_chart",
232 + "z": "5e07f5eeeb2a969b",
233 + "name": "",
234 + "group": "bb5657c2a8c290a3",
235 + "order": 1,
236 + "width": 0,
237 + "height": 0,
238 + "label": "BatV",
239 + "chartType": "line",
240 + "legend": "false",
241 + "xformat": "HH:mm:ss",
242 + "interpolate": "linear",
243 + "nodata": "",
244 + "dot": false,
245 + "ymin": "",
246 + "ymax": "",
247 + "removeOlder": 1,
248 + "removeOlderPoints": "",
249 + "removeOlderUnit": "3600",
250 + "cutout": 0,
251 + "useOneColor": false,
252 + "useUTC": false,
253 + "colors": [
254 + "#1f77b4",
255 + "#aec7e8",
256 + "#ff7f0e",
257 + "#2ca02c",
258 + "#98df8a",
259 + "#d62728",
260 + "#ff9896",
261 + "#9467bd",
262 + "#c5b0d5"
263 + ],
264 + "outputs": 1,
265 + "useDifferentColor": false,
266 + "className": "",
267 + "x": 930,
268 + "y": 120,
269 + "wires": [
270 + []
271 + ]
272 + },
273 + {
274 + "id": "c7d1f63ff5f0026a",
275 + "type": "ui_text",
276 + "z": "5e07f5eeeb2a969b",
277 + "group": "528e965cef294158",
278 + "order": 0,
279 + "width": "6",
280 + "height": "4",
281 + "name": "",
282 + "label": "Digital_IStatus",
283 + "format": "{{msg.payload}}",
284 + "layout": "col-center",
285 + "className": "",
286 + "x": 960,
287 + "y": 240,
288 + "wires": []
289 + },
290 + {
291 + "id": "159967056da52706",
292 + "type": "ui_text",
293 + "z": "5e07f5eeeb2a969b",
294 + "group": "5e615e3edb5999a0",
295 + "order": 0,
296 + "width": "6",
297 + "height": "4",
298 + "name": "",
299 + "label": "EXTI_Trigger",
300 + "format": "{{msg.payload}}",
301 + "layout": "col-center",
302 + "className": "",
303 + "x": 950,
304 + "y": 280,
305 + "wires": []
306 + },
307 + {
308 + "id": "7bb78b78445ac9e3",
309 + "type": "ui_chart",
310 + "z": "5e07f5eeeb2a969b",
311 + "name": "",
312 + "group": "5f7fec85295a7f7c",
313 + "order": 0,
314 + "width": 0,
315 + "height": 0,
316 + "label": "TempC_SHT",
317 + "chartType": "line",
318 + "legend": "false",
319 + "xformat": "HH:mm:ss",
320 + "interpolate": "linear",
321 + "nodata": "",
322 + "dot": false,
323 + "ymin": "",
324 + "ymax": "",
325 + "removeOlder": 1,
326 + "removeOlderPoints": "",
327 + "removeOlderUnit": "3600",
328 + "cutout": 0,
329 + "useOneColor": false,
330 + "useUTC": false,
331 + "colors": [
332 + "#1f77b4",
333 + "#aec7e8",
334 + "#ff7f0e",
335 + "#2ca02c",
336 + "#98df8a",
337 + "#d62728",
338 + "#ff9896",
339 + "#9467bd",
340 + "#c5b0d5"
341 + ],
342 + "outputs": 1,
343 + "useDifferentColor": false,
344 + "className": "",
345 + "x": 950,
346 + "y": 360,
347 + "wires": [
348 + []
349 + ]
350 + },
351 + {
352 + "id": "0364752170ed6228",
353 + "type": "ui_text",
354 + "z": "5e07f5eeeb2a969b",
355 + "group": "3cb616f18674c42a",
356 + "order": 0,
357 + "width": "6",
358 + "height": "4",
359 + "name": "",
360 + "label": "Work_mode",
361 + "format": "{{msg.payload}}",
362 + "layout": "col-center",
363 + "className": "",
364 + "x": 950,
365 + "y": 400,
366 + "wires": []
367 + },
368 + {
369 + "id": "65293155d71d54b9",
370 + "type": "ui_chart",
371 + "z": "5e07f5eeeb2a969b",
372 + "name": "",
373 + "group": "bb2e35e7a931c198",
374 + "order": 0,
375 + "width": 0,
376 + "height": 0,
377 + "label": "Hum_SHT",
378 + "chartType": "line",
379 + "legend": "false",
380 + "xformat": "HH:mm:ss",
381 + "interpolate": "linear",
382 + "nodata": "",
383 + "dot": false,
384 + "ymin": "",
385 + "ymax": "",
386 + "removeOlder": 1,
387 + "removeOlderPoints": "",
388 + "removeOlderUnit": "3600",
389 + "cutout": 0,
390 + "useOneColor": false,
391 + "useUTC": false,
392 + "colors": [
393 + "#1f77b4",
394 + "#aec7e8",
395 + "#ff7f0e",
396 + "#2ca02c",
397 + "#98df8a",
398 + "#d62728",
399 + "#ff9896",
400 + "#9467bd",
401 + "#c5b0d5"
402 + ],
403 + "outputs": 1,
404 + "useDifferentColor": false,
405 + "className": "",
406 + "x": 950,
407 + "y": 440,
408 + "wires": [
409 + []
410 + ]
411 + },
412 + {
413 + "id": "a21581a41adc1714",
414 + "type": "ui_text",
415 + "z": "5e07f5eeeb2a969b",
416 + "group": "9109ae41eee353df",
417 + "order": 0,
418 + "width": "6",
419 + "height": "4",
420 + "name": "",
421 + "label": "Door_status",
422 + "format": "{{msg.payload}}",
423 + "layout": "col-center",
424 + "className": "",
425 + "x": 950,
426 + "y": 320,
427 + "wires": []
428 + },
429 + {
430 + "id": "416a930e89291528",
431 + "type": "debug",
432 + "z": "5e07f5eeeb2a969b",
433 + "name": "debug 2",
434 + "active": true,
435 + "tosidebar": true,
436 + "console": false,
437 + "tostatus": false,
438 + "complete": "false",
439 + "statusVal": "",
440 + "statusType": "auto",
441 + "x": 660,
442 + "y": 60,
443 + "wires": []
444 + },
445 + {
446 + "id": "3601a98894805fbe",
447 + "type": "debug",
448 + "z": "5e07f5eeeb2a969b",
449 + "name": "debug 3",
450 + "active": true,
451 + "tosidebar": true,
452 + "console": false,
453 + "tostatus": false,
454 + "complete": "false",
455 + "statusVal": "",
456 + "statusType": "auto",
457 + "x": 380,
458 + "y": 240,
459 + "wires": []
460 + },
461 + {
462 + "id": "bb1c0e81fd51fa9e",
463 + "type": "serial-port",
464 + "serialport": "/dev/ttyUSB0",
465 + "serialbaud": "9600",
466 + "databits": "8",
467 + "parity": "none",
468 + "stopbits": "1",
469 + "waitfor": "",
470 + "dtr": "none",
471 + "rts": "none",
472 + "cts": "none",
473 + "dsr": "none",
474 + "newline": "\\n",
475 + "bin": "false",
476 + "out": "char",
477 + "addchar": "\\r\\n",
478 + "responsetimeout": "10000"
479 + },
480 + {
481 + "id": "c1fddd37879528e5",
482 + "type": "ui_group",
483 + "name": "BatV",
484 + "tab": "abb98f80600a5448",
485 + "order": 1,
486 + "disp": true,
487 + "width": "6",
488 + "collapse": false,
489 + "className": ""
490 + },
491 + {
492 + "id": "6d46fdae9f413f7b",
493 + "type": "ui_group",
494 + "name": "ADC_CH0V",
495 + "tab": "abb98f80600a5448",
496 + "order": 1,
497 + "disp": true,
498 + "width": "6",
499 + "collapse": false,
500 + "className": ""
501 + },
502 + {
503 + "id": "bb5657c2a8c290a3",
504 + "type": "ui_group",
505 + "name": "BatV",
506 + "tab": "abb98f80600a5448",
507 + "order": 3,
508 + "disp": true,
509 + "width": "6",
510 + "collapse": false,
511 + "className": ""
512 + },
513 + {
514 + "id": "528e965cef294158",
515 + "type": "ui_group",
516 + "name": "Digital_IStatus",
517 + "tab": "abb98f80600a5448",
518 + "order": 4,
519 + "disp": true,
520 + "width": "6",
521 + "collapse": false,
522 + "className": ""
523 + },
524 + {
525 + "id": "5e615e3edb5999a0",
526 + "type": "ui_group",
527 + "name": "EXTI_Trigger",
528 + "tab": "abb98f80600a5448",
529 + "order": 5,
530 + "disp": true,
531 + "width": "6",
532 + "collapse": false,
533 + "className": ""
534 + },
535 + {
536 + "id": "5f7fec85295a7f7c",
537 + "type": "ui_group",
538 + "name": "TempC_SHT",
539 + "tab": "abb98f80600a5448",
540 + "order": 6,
541 + "disp": true,
542 + "width": "6",
543 + "collapse": false,
544 + "className": ""
545 + },
546 + {
547 + "id": "3cb616f18674c42a",
548 + "type": "ui_group",
549 + "name": "Work_mode",
550 + "tab": "abb98f80600a5448",
551 + "order": 7,
552 + "disp": true,
553 + "width": "6",
554 + "collapse": false,
555 + "className": ""
556 + },
557 + {
558 + "id": "bb2e35e7a931c198",
559 + "type": "ui_group",
560 + "name": "Hum_SHT",
561 + "tab": "abb98f80600a5448",
562 + "order": 8,
563 + "disp": true,
564 + "width": "6",
565 + "collapse": false,
566 + "className": ""
567 + },
568 + {
569 + "id": "9109ae41eee353df",
570 + "type": "ui_group",
571 + "name": "Door_status",
572 + "tab": "abb98f80600a5448",
573 + "order": 9,
574 + "disp": true,
575 + "width": "6",
576 + "collapse": false,
577 + "className": ""
578 + },
579 + {
580 + "id": "abb98f80600a5448",
581 + "type": "ui_tab",
582 + "name": "LSN50v2 S31",
583 + "icon": "LSN50v2 S31",
584 + "disabled": false,
585 + "hidden": false
586 + }
587 +]
LoRa_send_trial.ino
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +3.4 KB
Content
... ... @@ -1,0 +1,124 @@
1 +#include "LoRaWan_APP.h"
2 +#include "Arduino.h"
3 +
4 +
5 +#define RF_FREQUENCY 868100000 // Hz
6 +
7 +#define TX_OUTPUT_POWER 5 // dBm
8 +
9 +#define LORA_BANDWIDTH 0 // [0: 125 kHz,
10 + // 1: 250 kHz,
11 + // 2: 500 kHz,
12 + // 3: Reserved]
13 +#define LORA_SPREADING_FACTOR 12 // [SF7..SF12]
14 +#define LORA_CODINGRATE 1 // [1: 4/5,
15 + // 2: 4/6,
16 + // 3: 4/7,
17 + // 4: 4/8]
18 +#define LORA_PREAMBLE_LENGTH 8 // Same for Tx and Rx
19 +#define LORA_SYMBOL_TIMEOUT 0 // Symbols
20 +#define LORA_FIX_LENGTH_PAYLOAD_ON false
21 +#define LORA_IQ_INVERSION_ON false
22 +
23 +
24 +#define RX_TIMEOUT_VALUE 1000
25 +#define BUFFER_SIZE 30 // Define the payload size here
26 +
27 +float tem,hum;
28 +char tem_1[8]={"\0"},hum_1[8]={"\0"};
29 +char *node_id = "<GW01>"; //From LG01 via web Local Channel settings on MQTT.Please refer <> dataformat in here.
30 +
31 +char txpacket[BUFFER_SIZE];
32 +char rxpacket[BUFFER_SIZE];
33 +
34 +double txNumber;
35 +
36 +bool lora_idle=true;
37 +
38 +static RadioEvents_t RadioEvents;
39 +void OnTxDone( void );
40 +void OnTxTimeout( void );
41 +
42 +void dhtTem()
43 +{
44 + tem = random(15,40);
45 + hum = random(40,80);
46 + Serial.println(F("The temperature and humidity:"));
47 + Serial.print("[");
48 + Serial.print(tem);
49 + Serial.print("℃");
50 + Serial.print(",");
51 + Serial.print(hum);
52 + Serial.print("%");
53 + Serial.print("]");
54 + Serial.println("");
55 +}
56 +
57 +void dhtWrite()
58 +{
59 + char data[50] = "\0";
60 + for(int i = 0; i < 50; i++)
61 + {
62 + data[i] = node_id[i];
63 + }
64 +
65 + dtostrf(tem,0,1,tem_1);
66 + dtostrf(hum,0,1,hum_1);
67 +
68 + strcat(data,"tem_a=");
69 + strcat(data,tem_1);
70 + strcat(data,"&hum_a=");
71 + strcat(data,hum_1);
72 + strcpy((char *)txpacket,data);
73 +
74 + Serial.println((char *)txpacket);
75 +}
76 +
77 +void setup() {
78 + Serial.begin(115200);
79 + Mcu.begin();
80 +
81 + txNumber=0;
82 +
83 + RadioEvents.TxDone = OnTxDone;
84 + RadioEvents.TxTimeout = OnTxTimeout;
85 +
86 + Radio.Init( &RadioEvents );
87 + Radio.SetChannel( RF_FREQUENCY );
88 + Radio.SetTxConfig( MODEM_LORA, TX_OUTPUT_POWER, 0, LORA_BANDWIDTH,
89 + LORA_SPREADING_FACTOR, LORA_CODINGRATE,
90 + LORA_PREAMBLE_LENGTH, LORA_FIX_LENGTH_PAYLOAD_ON,
91 + true, 0, 0, LORA_IQ_INVERSION_ON, 3000 );
92 + }
93 +
94 +
95 +
96 +void loop()
97 +{
98 + if(lora_idle == true)
99 + {
100 + delay(5000);
101 + txNumber += 0.01;
102 + Serial.println(txNumber);
103 +
104 + dhtTem();
105 + dhtWrite();
106 + Radio.Send( (uint8_t *)txpacket, strlen(txpacket) ); //send the package out
107 + lora_idle = false;
108 + }
109 + Radio.IrqProcess( );
110 +}
111 +
112 +void OnTxDone( void )
113 +{
114 + Serial.println("TX done......");
115 + lora_idle = true;
116 +}
117 +
118 +void OnTxTimeout( void )
119 +{
120 + Radio.Sleep( );
121 + Serial.println("TX Timeout......");
122 + lora_idle = true;
123 +}
124 +
Log-Temperature-Sensor-and-send-data-to-Node-red.ino
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 KB
Content
... ... @@ -1,0 +1,150 @@
1 +#include <SoftwareSerial.h>
2 +#include <Adafruit_Sensor.h>
3 +#include <DHT.h>
4 +#include <DHT_U.h>
5 +/*
6 +
7 +*/
8 +#define DHTPIN 8 // Digital pin connected to the DHT sensor
9 +#define DHTTYPE DHT11 // DHT 11
10 +DHT_Unified dht(DHTPIN, DHTTYPE);
11 +
12 +String inputString = ""; // a String to hold incoming data
13 +bool stringComplete = false; // whether the string is complete
14 +
15 +long old_time=millis();
16 +long new_time;
17 +
18 +long uplink_interval=30000; //ms
19 +
20 +float DHT11_temp;
21 +float DHT11_hum;
22 +
23 +SoftwareSerial ss(10, 11); // Arduino RX, TX ,
24 +
25 +char rxbuff[128];
26 +uint8_t rxbuff_index=0;
27 +
28 +void setup() {
29 + // initialize serial
30 + Serial.begin(9600);
31 +
32 + ss.begin(9600);
33 + ss.listen();
34 +
35 + // reserve 200 bytes for the inputString:
36 + inputString.reserve(200);
37 +
38 + dht.begin();
39 + sensor_t sensor;
40 + dht.temperature().getSensor(&sensor);
41 + dht.humidity().getSensor(&sensor);
42 +
43 + ss.println("ATZ");//reset LA66
44 +}
45 +
46 +void loop() {
47 +
48 + while ( ss.available()) {
49 + // get the new byte:
50 + char inChar = (char) ss.read();
51 + // add it to the inputString:
52 + inputString += inChar;
53 +
54 + rxbuff[rxbuff_index++]=inChar;
55 +
56 + if(rxbuff_index>128)
57 + {
58 + rxbuff[rxbuff_index]='\0';
59 + rxbuff_index=0;
60 + break;
61 + }
62 +
63 + // if the incoming character is a newline, set a flag so the main loop can
64 + // do something about it:
65 + if (inChar == '\n' || inChar == '\r') {
66 + stringComplete = true;
67 + rxbuff[rxbuff_index]='\0';
68 + rxbuff_index=0;
69 + }
70 + }
71 +
72 + while ( Serial.available()) {
73 + // get the new byte:
74 + char inChar = (char) Serial.read();
75 + // add it to the inputString:
76 + inputString += inChar;
77 + // if the incoming character is a newline, set a flag so the main loop can
78 + // do something about it:
79 + if (inChar == '\n' || inChar == '\r') {
80 + ss.print(inputString);
81 + inputString = "\0";
82 + }
83 + }
84 +
85 + // print the string when a newline arrives:
86 + if (stringComplete) {
87 + Serial.print(inputString);
88 +
89 + // clear the string:
90 + inputString = "\0";
91 + stringComplete = false;
92 + }
93 +
94 + new_time = millis();
95 +
96 + if(new_time-old_time>=uplink_interval){
97 + old_time = new_time;
98 +
99 + Serial.print(F("\r\n"));
100 + // Get temperature event and print its value.
101 + sensors_event_t event;
102 + dht.temperature().getEvent(&event);
103 + if (isnan(event.temperature)) {
104 + Serial.println(F("Error reading temperature!"));
105 + DHT11_temp=327.67;
106 + }
107 + else {
108 + DHT11_temp=event.temperature;
109 +
110 + if(DHT11_temp>60){
111 + DHT11_temp=60;
112 + }
113 + else if(DHT11_temp<-20){
114 + DHT11_temp=-20;
115 + }
116 + }
117 + // Get humidity event and print its value.
118 + dht.humidity().getEvent(&event);
119 + if (isnan(event.relative_humidity)) {
120 + DHT11_hum=327.67;
121 + Serial.println(F("Error reading humidity!"));
122 + }
123 + else {
124 + DHT11_hum=event.relative_humidity;
125 +
126 + if(DHT11_hum>100){
127 + DHT11_hum=100;
128 + }
129 + else if(DHT11_hum<0){
130 + DHT11_hum=0;
131 + }
132 + }
133 +
134 + Serial.print(F("Temperature: "));
135 + Serial.print(DHT11_temp);
136 + Serial.println(F("°C"));
137 + Serial.print(F("Humidity: "));
138 + Serial.print(DHT11_hum);
139 + Serial.println(F("%"));
140 + Serial.print(F("\r\n"));
141 +
142 + char sensor_data_buff[128]="\0";
143 +
144 + //confirm status,Fport,payload length,payload(HEX)
145 + snprintf(sensor_data_buff,128,"AT+SEND=0,%02X%02X%02X%02X,0,0",(short)(DHT11_temp*100)>>8 & 0xFF,(short)(DHT11_temp*100) & 0xFF,(short)(DHT11_hum*10)>>8 & 0xFF,(short)(DHT11_hum*10) & 0xFF);
146 + ss.print(sensor_data_buff);
147 + ss.print('\r');
148 + }
149 +}
150 +
Log-Temperature-Sensor-and-send-data-to-Node-red.json
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.3 KB
Content
... ... @@ -1,0 +1,443 @@
1 +[
2 + {
3 + "id": "0a211e08511c4bdd",
4 + "type": "tab",
5 + "label": "serial USB",
6 + "disabled": false,
7 + "info": "",
8 + "env": []
9 + },
10 + {
11 + "id": "4a97eeb54bf57a6d",
12 + "type": "serial in",
13 + "z": "0a211e08511c4bdd",
14 + "name": "",
15 + "serial": "bb1c0e81fd51fa9e",
16 + "x": 210,
17 + "y": 60,
18 + "wires": [
19 + [
20 + "d2493fb9752dbcab",
21 + "d183c255973c979e"
22 + ]
23 + ]
24 + },
25 + {
26 + "id": "12f1eeb8049675c1",
27 + "type": "inject",
28 + "z": "0a211e08511c4bdd",
29 + "name": "AT+SEND=1,hello world,0,3",
30 + "props": [
31 + {
32 + "p": "payload"
33 + }
34 + ],
35 + "repeat": "",
36 + "crontab": "",
37 + "once": false,
38 + "onceDelay": 0.1,
39 + "topic": "",
40 + "payload": "AT+SEND=1,hello world,0,3",
41 + "payloadType": "str",
42 + "x": 220,
43 + "y": 260,
44 + "wires": [
45 + [
46 + "a5d2f5df63a2148e"
47 + ]
48 + ]
49 + },
50 + {
51 + "id": "a5d2f5df63a2148e",
52 + "type": "serial out",
53 + "z": "0a211e08511c4bdd",
54 + "name": "",
55 + "serial": "bb1c0e81fd51fa9e",
56 + "x": 540,
57 + "y": 260,
58 + "wires": []
59 + },
60 + {
61 + "id": "dc04c04a0bc0e5db",
62 + "type": "inject",
63 + "z": "0a211e08511c4bdd",
64 + "name": "",
65 + "props": [
66 + {
67 + "p": "payload"
68 + }
69 + ],
70 + "repeat": "",
71 + "crontab": "",
72 + "once": false,
73 + "onceDelay": 0.1,
74 + "topic": "",
75 + "payload": "ATZ",
76 + "payloadType": "str",
77 + "x": 290,
78 + "y": 320,
79 + "wires": [
80 + [
81 + "a5d2f5df63a2148e"
82 + ]
83 + ]
84 + },
85 + {
86 + "id": "3de96a220e28e8f0",
87 + "type": "inject",
88 + "z": "0a211e08511c4bdd",
89 + "name": "AT+FRE",
90 + "props": [
91 + {
92 + "p": "payload"
93 + }
94 + ],
95 + "repeat": "",
96 + "crontab": "",
97 + "once": false,
98 + "onceDelay": 0.1,
99 + "topic": "",
100 + "payload": "AT+FRE=868.100,868.100",
101 + "payloadType": "str",
102 + "x": 280,
103 + "y": 380,
104 + "wires": [
105 + [
106 + "a5d2f5df63a2148e"
107 + ]
108 + ]
109 + },
110 + {
111 + "id": "638725a47a1e4365",
112 + "type": "inject",
113 + "z": "0a211e08511c4bdd",
114 + "name": "AT+BW",
115 + "props": [
116 + {
117 + "p": "payload"
118 + }
119 + ],
120 + "repeat": "",
121 + "crontab": "",
122 + "once": false,
123 + "onceDelay": 0.1,
124 + "topic": "",
125 + "payload": "AT+BW=0,0",
126 + "payloadType": "str",
127 + "x": 290,
128 + "y": 440,
129 + "wires": [
130 + [
131 + "a5d2f5df63a2148e"
132 + ]
133 + ]
134 + },
135 + {
136 + "id": "85ba9868d1f3e82c",
137 + "type": "inject",
138 + "z": "0a211e08511c4bdd",
139 + "name": "AT+SF",
140 + "props": [
141 + {
142 + "p": "payload"
143 + }
144 + ],
145 + "repeat": "",
146 + "crontab": "",
147 + "once": false,
148 + "onceDelay": 0.1,
149 + "topic": "",
150 + "payload": "AT+SF=12,12",
151 + "payloadType": "str",
152 + "x": 290,
153 + "y": 500,
154 + "wires": [
155 + [
156 + "a5d2f5df63a2148e"
157 + ]
158 + ]
159 + },
160 + {
161 + "id": "144b2749013ffe57",
162 + "type": "inject",
163 + "z": "0a211e08511c4bdd",
164 + "name": "AT+RXMOD",
165 + "props": [
166 + {
167 + "p": "payload"
168 + }
169 + ],
170 + "repeat": "",
171 + "crontab": "",
172 + "once": false,
173 + "onceDelay": 0.1,
174 + "topic": "",
175 + "payload": "AT+RXMOD=65535,2",
176 + "payloadType": "str",
177 + "x": 270,
178 + "y": 560,
179 + "wires": [
180 + [
181 + "a5d2f5df63a2148e"
182 + ]
183 + ]
184 + },
185 + {
186 + "id": "bfb2e9df89dc5e2f",
187 + "type": "inject",
188 + "z": "0a211e08511c4bdd",
189 + "name": "AT+SYNCWORD",
190 + "props": [
191 + {
192 + "p": "payload"
193 + }
194 + ],
195 + "repeat": "",
196 + "crontab": "",
197 + "once": false,
198 + "onceDelay": 0.1,
199 + "topic": "",
200 + "payload": "AT+SYNCWORD=0",
201 + "payloadType": "str",
202 + "x": 260,
203 + "y": 620,
204 + "wires": [
205 + [
206 + "a5d2f5df63a2148e"
207 + ]
208 + ]
209 + },
210 + {
211 + "id": "d2493fb9752dbcab",
212 + "type": "function",
213 + "z": "0a211e08511c4bdd",
214 + "name": "function 1",
215 + "func": "var data = msg.payload\nif (data.substring(0, 4) == \"Data\") {\n if (data.substring(6, 12) == \"(HEX:)\") {\n var temp = data.substring(13, 15) + data.substring(16, 18)\n var hum = data.substring(19, 21) + data.substring(22, 24)\n var temp1 = parseInt(temp, 16) / 100\n var hum1 = parseInt(hum, 16) / 10\n var a1 = { payload: temp1 }, a2 = { payload: hum1 }\n }\n if (data.substring(6, 15) == \"(String:)\") {\n var temp = data.substring(20, 24)\n var hum = data.substring(29, 34)\n a1 = { payload: temp }, a2 = { payload: hum }\n }\n}\nif (data.substring(0, 4) == \"Rssi\") {\n var rssi = data.substring(6)\n var a3 = { payload: rssi }\n}\nreturn [a1, a2, a3];",
216 + "outputs": 3,
217 + "noerr": 0,
218 + "initialize": "",
219 + "finalize": "",
220 + "libs": [],
221 + "x": 420,
222 + "y": 60,
223 + "wires": [
224 + [
225 + "c17d94be4317ae6c"
226 + ],
227 + [
228 + "20c5b1c7f42fa6bb"
229 + ],
230 + [
231 + "39a8462f3d748eef"
232 + ]
233 + ]
234 + },
235 + {
236 + "id": "39a8462f3d748eef",
237 + "type": "ui_chart",
238 + "z": "0a211e08511c4bdd",
239 + "name": "",
240 + "group": "ef41b39771110fa5",
241 + "order": 1,
242 + "width": 0,
243 + "height": 0,
244 + "label": "RSSI",
245 + "chartType": "line",
246 + "legend": "false",
247 + "xformat": "dd HH:mm",
248 + "interpolate": "linear",
249 + "nodata": "",
250 + "dot": true,
251 + "ymin": "",
252 + "ymax": "",
253 + "removeOlder": 1,
254 + "removeOlderPoints": "",
255 + "removeOlderUnit": "3600",
256 + "cutout": 0,
257 + "useOneColor": false,
258 + "useUTC": false,
259 + "colors": [
260 + "#1f77b4",
261 + "#aec7e8",
262 + "#ff7f0e",
263 + "#2ca02c",
264 + "#98df8a",
265 + "#d62728",
266 + "#ff9896",
267 + "#9467bd",
268 + "#c5b0d5"
269 + ],
270 + "outputs": 1,
271 + "useDifferentColor": false,
272 + "className": "",
273 + "x": 670,
274 + "y": 180,
275 + "wires": [
276 + []
277 + ]
278 + },
279 + {
280 + "id": "c17d94be4317ae6c",
281 + "type": "ui_chart",
282 + "z": "0a211e08511c4bdd",
283 + "name": "",
284 + "group": "7e1d1c102cf74e6b",
285 + "order": 1,
286 + "width": 0,
287 + "height": 0,
288 + "label": "Temperature",
289 + "chartType": "line",
290 + "legend": "false",
291 + "xformat": "HH:mm:ss",
292 + "interpolate": "linear",
293 + "nodata": "",
294 + "dot": true,
295 + "ymin": "",
296 + "ymax": "",
297 + "removeOlder": 1,
298 + "removeOlderPoints": "",
299 + "removeOlderUnit": "3600",
300 + "cutout": 0,
301 + "useOneColor": false,
302 + "useUTC": false,
303 + "colors": [
304 + "#1f77b4",
305 + "#aec7e8",
306 + "#ff7f0e",
307 + "#2ca02c",
308 + "#98df8a",
309 + "#d62728",
310 + "#ff9896",
311 + "#9467bd",
312 + "#c5b0d5"
313 + ],
314 + "outputs": 1,
315 + "useDifferentColor": false,
316 + "className": "",
317 + "x": 690,
318 + "y": 100,
319 + "wires": [
320 + []
321 + ]
322 + },
323 + {
324 + "id": "20c5b1c7f42fa6bb",
325 + "type": "ui_chart",
326 + "z": "0a211e08511c4bdd",
327 + "name": "",
328 + "group": "3f5d139f158d7c1c",
329 + "order": 2,
330 + "width": 0,
331 + "height": 0,
332 + "label": "Humidity",
333 + "chartType": "line",
334 + "legend": "false",
335 + "xformat": "HH:mm:ss",
336 + "interpolate": "linear",
337 + "nodata": "",
338 + "dot": true,
339 + "ymin": "",
340 + "ymax": "",
341 + "removeOlder": 1,
342 + "removeOlderPoints": "",
343 + "removeOlderUnit": "3600",
344 + "cutout": 0,
345 + "useOneColor": false,
346 + "useUTC": false,
347 + "colors": [
348 + "#1f77b4",
349 + "#aec7e8",
350 + "#ff7f0e",
351 + "#2ca02c",
352 + "#98df8a",
353 + "#d62728",
354 + "#ff9896",
355 + "#9467bd",
356 + "#c5b0d5"
357 + ],
358 + "outputs": 1,
359 + "useDifferentColor": false,
360 + "className": "",
361 + "x": 680,
362 + "y": 140,
363 + "wires": [
364 + []
365 + ]
366 + },
367 + {
368 + "id": "d183c255973c979e",
369 + "type": "debug",
370 + "z": "0a211e08511c4bdd",
371 + "name": "debug 1",
372 + "active": true,
373 + "tosidebar": true,
374 + "console": false,
375 + "tostatus": false,
376 + "complete": "false",
377 + "statusVal": "",
378 + "statusType": "auto",
379 + "x": 420,
380 + "y": 180,
381 + "wires": []
382 + },
383 + {
384 + "id": "bb1c0e81fd51fa9e",
385 + "type": "serial-port",
386 + "serialport": "/dev/ttyUSB0",
387 + "serialbaud": "9600",
388 + "databits": "8",
389 + "parity": "none",
390 + "stopbits": "1",
391 + "waitfor": "",
392 + "dtr": "none",
393 + "rts": "none",
394 + "cts": "none",
395 + "dsr": "none",
396 + "newline": "\\n",
397 + "bin": "false",
398 + "out": "char",
399 + "addchar": "\\r\\n",
400 + "responsetimeout": "10000"
401 + },
402 + {
403 + "id": "ef41b39771110fa5",
404 + "type": "ui_group",
405 + "name": "rssi",
406 + "tab": "abb98f80600a5448",
407 + "order": 3,
408 + "disp": true,
409 + "width": "6",
410 + "collapse": false,
411 + "className": ""
412 + },
413 + {
414 + "id": "7e1d1c102cf74e6b",
415 + "type": "ui_group",
416 + "name": "TEM",
417 + "tab": "abb98f80600a5448",
418 + "order": 4,
419 + "disp": true,
420 + "width": "6",
421 + "collapse": false,
422 + "className": ""
423 + },
424 + {
425 + "id": "3f5d139f158d7c1c",
426 + "type": "ui_group",
427 + "name": "HUM",
428 + "tab": "abb98f80600a5448",
429 + "order": 2,
430 + "disp": true,
431 + "width": "6",
432 + "collapse": false,
433 + "className": ""
434 + },
435 + {
436 + "id": "abb98f80600a5448",
437 + "type": "ui_tab",
438 + "name": "LG01v2",
439 + "icon": "LG01v2",
440 + "disabled": false,
441 + "hidden": false
442 + }
443 +]
Log-Temperature-Sensor-and-send-data-to-node-red.json
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
... ... @@ -1,0 +1,443 @@
1 +[
2 + {
3 + "id": "5f10779accc05655",
4 + "type": "tab",
5 + "label": "serial USB",
6 + "disabled": false,
7 + "info": "",
8 + "env": []
9 + },
10 + {
11 + "id": "4ea60ce4df40717c",
12 + "type": "serial in",
13 + "z": "5f10779accc05655",
14 + "name": "",
15 + "serial": "bb1c0e81fd51fa9e",
16 + "x": 210,
17 + "y": 60,
18 + "wires": [
19 + [
20 + "40eac96a52733f7a",
21 + "79722a224bb22c96"
22 + ]
23 + ]
24 + },
25 + {
26 + "id": "fe5a93a52b6adcf1",
27 + "type": "inject",
28 + "z": "5f10779accc05655",
29 + "name": "AT+SEND=1,hello world,0,3",
30 + "props": [
31 + {
32 + "p": "payload"
33 + }
34 + ],
35 + "repeat": "",
36 + "crontab": "",
37 + "once": false,
38 + "onceDelay": 0.1,
39 + "topic": "",
40 + "payload": "AT+SEND=1,hello world,0,3",
41 + "payloadType": "str",
42 + "x": 220,
43 + "y": 260,
44 + "wires": [
45 + [
46 + "3f8add7e2e1d1d17"
47 + ]
48 + ]
49 + },
50 + {
51 + "id": "3f8add7e2e1d1d17",
52 + "type": "serial out",
53 + "z": "5f10779accc05655",
54 + "name": "",
55 + "serial": "bb1c0e81fd51fa9e",
56 + "x": 540,
57 + "y": 260,
58 + "wires": []
59 + },
60 + {
61 + "id": "16e7d3d83d9e9415",
62 + "type": "inject",
63 + "z": "5f10779accc05655",
64 + "name": "",
65 + "props": [
66 + {
67 + "p": "payload"
68 + }
69 + ],
70 + "repeat": "",
71 + "crontab": "",
72 + "once": false,
73 + "onceDelay": 0.1,
74 + "topic": "",
75 + "payload": "ATZ",
76 + "payloadType": "str",
77 + "x": 290,
78 + "y": 320,
79 + "wires": [
80 + [
81 + "3f8add7e2e1d1d17"
82 + ]
83 + ]
84 + },
85 + {
86 + "id": "09ea381519629dae",
87 + "type": "inject",
88 + "z": "5f10779accc05655",
89 + "name": "AT+FRE",
90 + "props": [
91 + {
92 + "p": "payload"
93 + }
94 + ],
95 + "repeat": "",
96 + "crontab": "",
97 + "once": false,
98 + "onceDelay": 0.1,
99 + "topic": "",
100 + "payload": "AT+FRE=868.100,868.100",
101 + "payloadType": "str",
102 + "x": 280,
103 + "y": 380,
104 + "wires": [
105 + [
106 + "3f8add7e2e1d1d17"
107 + ]
108 + ]
109 + },
110 + {
111 + "id": "5167a7f904013ffd",
112 + "type": "inject",
113 + "z": "5f10779accc05655",
114 + "name": "AT+BW",
115 + "props": [
116 + {
117 + "p": "payload"
118 + }
119 + ],
120 + "repeat": "",
121 + "crontab": "",
122 + "once": false,
123 + "onceDelay": 0.1,
124 + "topic": "",
125 + "payload": "AT+BW=0,0",
126 + "payloadType": "str",
127 + "x": 290,
128 + "y": 440,
129 + "wires": [
130 + [
131 + "3f8add7e2e1d1d17"
132 + ]
133 + ]
134 + },
135 + {
136 + "id": "dbe4abbc730c76e6",
137 + "type": "inject",
138 + "z": "5f10779accc05655",
139 + "name": "AT+SF",
140 + "props": [
141 + {
142 + "p": "payload"
143 + }
144 + ],
145 + "repeat": "",
146 + "crontab": "",
147 + "once": false,
148 + "onceDelay": 0.1,
149 + "topic": "",
150 + "payload": "AT+SF=12,12",
151 + "payloadType": "str",
152 + "x": 290,
153 + "y": 500,
154 + "wires": [
155 + [
156 + "3f8add7e2e1d1d17"
157 + ]
158 + ]
159 + },
160 + {
161 + "id": "3be3ab296a75d512",
162 + "type": "inject",
163 + "z": "5f10779accc05655",
164 + "name": "AT+RXMOD",
165 + "props": [
166 + {
167 + "p": "payload"
168 + }
169 + ],
170 + "repeat": "",
171 + "crontab": "",
172 + "once": false,
173 + "onceDelay": 0.1,
174 + "topic": "",
175 + "payload": "AT+RXMOD=65535,2",
176 + "payloadType": "str",
177 + "x": 270,
178 + "y": 560,
179 + "wires": [
180 + [
181 + "3f8add7e2e1d1d17"
182 + ]
183 + ]
184 + },
185 + {
186 + "id": "7a03d1413c60ea1c",
187 + "type": "inject",
188 + "z": "5f10779accc05655",
189 + "name": "AT+SYNCWORD",
190 + "props": [
191 + {
192 + "p": "payload"
193 + }
194 + ],
195 + "repeat": "",
196 + "crontab": "",
197 + "once": false,
198 + "onceDelay": 0.1,
199 + "topic": "",
200 + "payload": "AT+SYNCWORD=0",
201 + "payloadType": "str",
202 + "x": 260,
203 + "y": 620,
204 + "wires": [
205 + [
206 + "3f8add7e2e1d1d17"
207 + ]
208 + ]
209 + },
210 + {
211 + "id": "40eac96a52733f7a",
212 + "type": "function",
213 + "z": "5f10779accc05655",
214 + "name": "function 1",
215 + "func": "var data = msg.payload\nif (data.substring(0, 4) == \"Data\")\n{\n if (data.substring(6, 12) == \"(HEX:)\")\n {\n var temp = data.substring(13, 15) + data.substring(16, 18)\n var hum = data.substring(19, 21) + data.substring(22, 24)\n var temp1 = parseInt(temp, 16)/100\n var hum1 = parseInt(hum, 16)/10\n var a1 = { payload: temp1 }, a2 = { payload: hum1 }\n }\n}\nif (data.substring(0, 4) == \"Rssi\")\n{\n var rssi = data.substring(6)\n var a3 = { payload: rssi }\n}\nreturn [a1,a2,a3];\n \n\n",
216 + "outputs": 3,
217 + "noerr": 0,
218 + "initialize": "",
219 + "finalize": "",
220 + "libs": [],
221 + "x": 420,
222 + "y": 60,
223 + "wires": [
224 + [
225 + "81edb003937f1a92"
226 + ],
227 + [
228 + "c63593404a60d9dc"
229 + ],
230 + [
231 + "61ca71032888887b"
232 + ]
233 + ]
234 + },
235 + {
236 + "id": "61ca71032888887b",
237 + "type": "ui_chart",
238 + "z": "5f10779accc05655",
239 + "name": "",
240 + "group": "ef41b39771110fa5",
241 + "order": 1,
242 + "width": 0,
243 + "height": 0,
244 + "label": "RSSI",
245 + "chartType": "line",
246 + "legend": "false",
247 + "xformat": "dd HH:mm",
248 + "interpolate": "linear",
249 + "nodata": "",
250 + "dot": true,
251 + "ymin": "",
252 + "ymax": "",
253 + "removeOlder": 1,
254 + "removeOlderPoints": "",
255 + "removeOlderUnit": "3600",
256 + "cutout": 0,
257 + "useOneColor": false,
258 + "useUTC": false,
259 + "colors": [
260 + "#1f77b4",
261 + "#aec7e8",
262 + "#ff7f0e",
263 + "#2ca02c",
264 + "#98df8a",
265 + "#d62728",
266 + "#ff9896",
267 + "#9467bd",
268 + "#c5b0d5"
269 + ],
270 + "outputs": 1,
271 + "useDifferentColor": false,
272 + "className": "",
273 + "x": 670,
274 + "y": 180,
275 + "wires": [
276 + []
277 + ]
278 + },
279 + {
280 + "id": "81edb003937f1a92",
281 + "type": "ui_chart",
282 + "z": "5f10779accc05655",
283 + "name": "",
284 + "group": "7e1d1c102cf74e6b",
285 + "order": 1,
286 + "width": 0,
287 + "height": 0,
288 + "label": "Temperature",
289 + "chartType": "line",
290 + "legend": "false",
291 + "xformat": "HH:mm:ss",
292 + "interpolate": "linear",
293 + "nodata": "",
294 + "dot": true,
295 + "ymin": "",
296 + "ymax": "",
297 + "removeOlder": 1,
298 + "removeOlderPoints": "",
299 + "removeOlderUnit": "3600",
300 + "cutout": 0,
301 + "useOneColor": false,
302 + "useUTC": false,
303 + "colors": [
304 + "#1f77b4",
305 + "#aec7e8",
306 + "#ff7f0e",
307 + "#2ca02c",
308 + "#98df8a",
309 + "#d62728",
310 + "#ff9896",
311 + "#9467bd",
312 + "#c5b0d5"
313 + ],
314 + "outputs": 1,
315 + "useDifferentColor": false,
316 + "className": "",
317 + "x": 690,
318 + "y": 100,
319 + "wires": [
320 + []
321 + ]
322 + },
323 + {
324 + "id": "c63593404a60d9dc",
325 + "type": "ui_chart",
326 + "z": "5f10779accc05655",
327 + "name": "",
328 + "group": "3f5d139f158d7c1c",
329 + "order": 2,
330 + "width": 0,
331 + "height": 0,
332 + "label": "Humidity",
333 + "chartType": "line",
334 + "legend": "false",
335 + "xformat": "HH:mm:ss",
336 + "interpolate": "linear",
337 + "nodata": "",
338 + "dot": true,
339 + "ymin": "",
340 + "ymax": "",
341 + "removeOlder": 1,
342 + "removeOlderPoints": "",
343 + "removeOlderUnit": "3600",
344 + "cutout": 0,
345 + "useOneColor": false,
346 + "useUTC": false,
347 + "colors": [
348 + "#1f77b4",
349 + "#aec7e8",
350 + "#ff7f0e",
351 + "#2ca02c",
352 + "#98df8a",
353 + "#d62728",
354 + "#ff9896",
355 + "#9467bd",
356 + "#c5b0d5"
357 + ],
358 + "outputs": 1,
359 + "useDifferentColor": false,
360 + "className": "",
361 + "x": 680,
362 + "y": 140,
363 + "wires": [
364 + []
365 + ]
366 + },
367 + {
368 + "id": "79722a224bb22c96",
369 + "type": "debug",
370 + "z": "5f10779accc05655",
371 + "name": "debug 1",
372 + "active": true,
373 + "tosidebar": true,
374 + "console": false,
375 + "tostatus": false,
376 + "complete": "false",
377 + "statusVal": "",
378 + "statusType": "auto",
379 + "x": 420,
380 + "y": 180,
381 + "wires": []
382 + },
383 + {
384 + "id": "bb1c0e81fd51fa9e",
385 + "type": "serial-port",
386 + "serialport": "/dev/ttyUSB0",
387 + "serialbaud": "9600",
388 + "databits": "8",
389 + "parity": "none",
390 + "stopbits": "1",
391 + "waitfor": "",
392 + "dtr": "none",
393 + "rts": "none",
394 + "cts": "none",
395 + "dsr": "none",
396 + "newline": "\\n",
397 + "bin": "false",
398 + "out": "char",
399 + "addchar": "\\r\\n",
400 + "responsetimeout": "10000"
401 + },
402 + {
403 + "id": "ef41b39771110fa5",
404 + "type": "ui_group",
405 + "name": "rssi",
406 + "tab": "abb98f80600a5448",
407 + "order": 3,
408 + "disp": true,
409 + "width": "6",
410 + "collapse": false,
411 + "className": ""
412 + },
413 + {
414 + "id": "7e1d1c102cf74e6b",
415 + "type": "ui_group",
416 + "name": "TEM",
417 + "tab": "abb98f80600a5448",
418 + "order": 4,
419 + "disp": true,
420 + "width": "6",
421 + "collapse": false,
422 + "className": ""
423 + },
424 + {
425 + "id": "3f5d139f158d7c1c",
426 + "type": "ui_group",
427 + "name": "HUM",
428 + "tab": "abb98f80600a5448",
429 + "order": 2,
430 + "disp": true,
431 + "width": "6",
432 + "collapse": false,
433 + "className": ""
434 + },
435 + {
436 + "id": "abb98f80600a5448",
437 + "type": "ui_tab",
438 + "name": "LG01v2",
439 + "icon": "LG01v2",
440 + "disabled": false,
441 + "hidden": false
442 + }
443 +]
image-20221103142228-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.7 KB
Content
image-20221103142416-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +325.9 KB
Content
image-20221103143528-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.2 KB
Content
image-20221103143618-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20221103144405-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +32.8 KB
Content
image-20221103152033-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.3 KB
Content
image-20221103152238-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +32.8 KB
Content
image-20221104100344-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +137.0 KB
Content
image-20221104100520-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +140.7 KB
Content
image-20221104102736-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +325.9 KB
Content
image-20221104155612-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +384.2 KB
Content
image-20221104155654-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20221104155724-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +42.4 KB
Content
image-20221104155907-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +66.7 KB
Content
image-20221104155928-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.5 KB
Content
image-20221104155949-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +46.0 KB
Content
image-20221108164337-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20221108164413-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +27.1 KB
Content
image-20221108170314-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.6 KB
Content
image-20221108170621-4.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +544.6 KB
Content
image-20221108170731-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +2.5 MB
Content
image-20221108172149-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20221108172432-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +45.9 KB
Content
image-20221108174840-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.1 KB
Content
image-20221108175113-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +72.6 KB
Content
image-20221108180334-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +159.3 KB
Content
image-20221108180458-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.4 KB
Content
image-20221112161031-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.1 KB
Content
image-20221112161111-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20221112162733-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +78.7 KB
Content
image-20221112163119-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +32.6 KB
Content
image-20230504095457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +412.6 KB
Content
image-20230504095502-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +412.6 KB
Content
image-20230504100722-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.5 KB
Content
image-20230506110646-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +383.1 KB
Content
image-20230506113332-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.6 KB
Content
image-20230506113432-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +36.5 KB
Content
image-20230506113531-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +403.2 KB
Content
image-20230506113602-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +26.7 KB
Content
image-20230506113623-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.4 KB
Content
image-20230506113705-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +40.9 KB
Content
image-20230506113722-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.2 KB
Content
image-20230506113737-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.2 KB
Content
image-20230506113813-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +39.5 KB
Content
image-20230506113831-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +32.2 KB
Content
image-20230506114127-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +56.1 KB
Content
image-20230506115438-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +413.6 KB
Content
image-20230620103153-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +127.6 KB
Content
image-20230620103535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +156.3 KB
Content
image-20230620103923-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +72.7 KB
Content
image-20231014092843-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +596 bytes
Content
image-20231014092934-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +620 bytes
Content
image-20231014092954-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +618 bytes
Content
image-20231014092959-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +563 bytes
Content
serial USB.json
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 KB
Content
... ... @@ -1,0 +1,244 @@
1 +[
2 + {
3 + "id": "5f10779accc05655",
4 + "type": "tab",
5 + "label": "serial USB",
6 + "disabled": false,
7 + "info": "",
8 + "env": []
9 + },
10 + {
11 + "id": "4ea60ce4df40717c",
12 + "type": "serial in",
13 + "z": "5f10779accc05655",
14 + "name": "",
15 + "serial": "bb1c0e81fd51fa9e",
16 + "x": 230,
17 + "y": 60,
18 + "wires": [
19 + [
20 + "a8a0db18429e7d84"
21 + ]
22 + ]
23 + },
24 + {
25 + "id": "a8a0db18429e7d84",
26 + "type": "debug",
27 + "z": "5f10779accc05655",
28 + "name": "debug 1",
29 + "active": true,
30 + "tosidebar": true,
31 + "console": false,
32 + "tostatus": false,
33 + "complete": "false",
34 + "statusVal": "",
35 + "statusType": "auto",
36 + "x": 440,
37 + "y": 60,
38 + "wires": []
39 + },
40 + {
41 + "id": "fe5a93a52b6adcf1",
42 + "type": "inject",
43 + "z": "5f10779accc05655",
44 + "name": "AT+SEND=1,hello world,0,3",
45 + "props": [
46 + {
47 + "p": "payload"
48 + }
49 + ],
50 + "repeat": "",
51 + "crontab": "",
52 + "once": false,
53 + "onceDelay": 0.1,
54 + "topic": "",
55 + "payload": "AT+SEND=1,hello world,0,3",
56 + "payloadType": "str",
57 + "x": 200,
58 + "y": 140,
59 + "wires": [
60 + [
61 + "3f8add7e2e1d1d17"
62 + ]
63 + ]
64 + },
65 + {
66 + "id": "3f8add7e2e1d1d17",
67 + "type": "serial out",
68 + "z": "5f10779accc05655",
69 + "name": "",
70 + "serial": "bb1c0e81fd51fa9e",
71 + "x": 530,
72 + "y": 140,
73 + "wires": []
74 + },
75 + {
76 + "id": "16e7d3d83d9e9415",
77 + "type": "inject",
78 + "z": "5f10779accc05655",
79 + "name": "",
80 + "props": [
81 + {
82 + "p": "payload"
83 + }
84 + ],
85 + "repeat": "",
86 + "crontab": "",
87 + "once": false,
88 + "onceDelay": 0.1,
89 + "topic": "",
90 + "payload": "ATZ",
91 + "payloadType": "str",
92 + "x": 270,
93 + "y": 200,
94 + "wires": [
95 + [
96 + "3f8add7e2e1d1d17"
97 + ]
98 + ]
99 + },
100 + {
101 + "id": "09ea381519629dae",
102 + "type": "inject",
103 + "z": "5f10779accc05655",
104 + "name": "AT+FRE",
105 + "props": [
106 + {
107 + "p": "payload"
108 + }
109 + ],
110 + "repeat": "",
111 + "crontab": "",
112 + "once": false,
113 + "onceDelay": 0.1,
114 + "topic": "",
115 + "payload": "AT+FRE=868.100,868.100",
116 + "payloadType": "str",
117 + "x": 260,
118 + "y": 260,
119 + "wires": [
120 + [
121 + "3f8add7e2e1d1d17"
122 + ]
123 + ]
124 + },
125 + {
126 + "id": "5167a7f904013ffd",
127 + "type": "inject",
128 + "z": "5f10779accc05655",
129 + "name": "AT+BW",
130 + "props": [
131 + {
132 + "p": "payload"
133 + }
134 + ],
135 + "repeat": "",
136 + "crontab": "",
137 + "once": false,
138 + "onceDelay": 0.1,
139 + "topic": "",
140 + "payload": "AT+BW=0,0",
141 + "payloadType": "str",
142 + "x": 270,
143 + "y": 320,
144 + "wires": [
145 + [
146 + "3f8add7e2e1d1d17"
147 + ]
148 + ]
149 + },
150 + {
151 + "id": "dbe4abbc730c76e6",
152 + "type": "inject",
153 + "z": "5f10779accc05655",
154 + "name": "AT+SF",
155 + "props": [
156 + {
157 + "p": "payload"
158 + }
159 + ],
160 + "repeat": "",
161 + "crontab": "",
162 + "once": false,
163 + "onceDelay": 0.1,
164 + "topic": "",
165 + "payload": "AT+SF=12,12",
166 + "payloadType": "str",
167 + "x": 270,
168 + "y": 380,
169 + "wires": [
170 + [
171 + "3f8add7e2e1d1d17"
172 + ]
173 + ]
174 + },
175 + {
176 + "id": "3be3ab296a75d512",
177 + "type": "inject",
178 + "z": "5f10779accc05655",
179 + "name": "AT+RXMOD",
180 + "props": [
181 + {
182 + "p": "payload"
183 + }
184 + ],
185 + "repeat": "",
186 + "crontab": "",
187 + "once": false,
188 + "onceDelay": 0.1,
189 + "topic": "",
190 + "payload": "AT+RXMOD=65535,0",
191 + "payloadType": "str",
192 + "x": 250,
193 + "y": 440,
194 + "wires": [
195 + [
196 + "3f8add7e2e1d1d17"
197 + ]
198 + ]
199 + },
200 + {
201 + "id": "7a03d1413c60ea1c",
202 + "type": "inject",
203 + "z": "5f10779accc05655",
204 + "name": "AT+SYNCWORD",
205 + "props": [
206 + {
207 + "p": "payload"
208 + }
209 + ],
210 + "repeat": "",
211 + "crontab": "",
212 + "once": false,
213 + "onceDelay": 0.1,
214 + "topic": "",
215 + "payload": "AT+SYNCWORD=0",
216 + "payloadType": "str",
217 + "x": 240,
218 + "y": 500,
219 + "wires": [
220 + [
221 + "3f8add7e2e1d1d17"
222 + ]
223 + ]
224 + },
225 + {
226 + "id": "bb1c0e81fd51fa9e",
227 + "type": "serial-port",
228 + "serialport": "/dev/ttyUSB0",
229 + "serialbaud": "9600",
230 + "databits": "8",
231 + "parity": "none",
232 + "stopbits": "1",
233 + "waitfor": "",
234 + "dtr": "none",
235 + "rts": "none",
236 + "cts": "none",
237 + "dsr": "none",
238 + "newline": "\\n",
239 + "bin": "false",
240 + "out": "char",
241 + "addchar": "\\n",
242 + "responsetimeout": "10000"
243 + }
244 +]

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0