Changes for page LG01v2 -- LoRa Gateway User Manual

Last modified by Kilight Cao on 2024/10/12 08:58

From version < 49.1 >

edited by Kilight Cao
on 2022/11/03 14:06

To version < 67.1 >

edited by Kilight Cao
on 2022/11/04 15:56

Change comment: Uploaded new attachment "image-20221104155612-1.png", version {1}

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)
Attachments (0 modified, 13 added, 0 removed)

Details

Page properties

Content

@@ -14,16 +14,16 @@
  = **1. Introduction** =
--== **1.1 What is LG01v2** ==
++== **1.1 What is LG01-V2** ==
  (((
  (((
--The LG01v2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
++The LG01-V2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
  )))
  (((
--LG01v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
++LG01-V2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
  )))
@@ -88,7 +88,7 @@
  == **1.6 Button Intruction** ==
--LG01v2 has a black toggle button, which is:
++LG01-V2 has a black toggle button, which is:
  (% style="color:blue" %)**//➢ //Long press 4-5s                   : **(%%)the gateway will reload the Network and Initialize wifi configuration
@@ -119,7 +119,7 @@
  === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
--Connect the LG01v2 Ethernet port to your router and LG01v2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01v2.
++Connect the LG01-V2 Ethernet port to your router and LG01-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01-V2.
  You can also use this IP to connect.
@@ -132,7 +132,7 @@
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100542-2.png?width=1256&height=369&rev=1.1||alt="image-20220622100542-2.png"]]
--The LG01v2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
++The LG01-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
  (% style="color:#037691" %)**Steps to connect via fallback IP:**
@@ -216,15 +216,49 @@
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220917144725-6.png?width=869&height=208&rev=1.1||alt="image-20220917144725-6.png"]]
++= (% id="cke_bm_1978S" style="display:none" %)** **(%%)**4. Build in Server** =
--= **4. How to configure the Lora Gateway** =
++The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
--== **4.1 Access the Lora configuration page** ==
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820115644-1.png?width=778&height=217&rev=1.1||alt="image-20220820115644-1.png"]]
--Users can access the LA66 module by running the following command, then select the option **''serial port setup"**:
++(% style="color:red" %)**Note:**
++
++         **Path**: System ~-~-> Built-in Server
++
++
++**Troubleshooting:**
++
++
++**~         1. URL does not jump properly**
++
++                For the Node-Red, you can use the local IP address and the port is 1880 to access it.
++
++
++
++== **4.1 Application Server ~-~- Node-Red** ==
++
++
++You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
++
++
++Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
++
++
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
++
++
++= **5. How to configure the Lora Gateway** =
++
++
++== **5.1 Access the Lora configuration page** ==
++
++
++Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**:
++
  (% class="box infomessage" %)
  (((
  **root@dragino-2406ef:~~# minicom -s**
@@ -268,25 +268,25 @@
  )))
--== **4.2 Example: LG01v2 Peer-to-Peer** ==
++== **5.2 Example: LG01**-**V2 Peer-to-Peer** ==
--[[image:image-20221102114002-3.png]]
++[[image:image-20221104102736-3.png||height="282" width="723"]]
--The user can run the AT command to set the LG01v2 RX window always open as a Receiver, the Sender uses **AT+SEND=1,hello world,2,3** to simulate sending data,
--Prerequisites: The configuration of LG01v2 and Sender must match, users can use **AT+CFG** to check all configurations.
++The user can run the AT command to set the LG01-V2 RX window always open as a Receiver, the LA66 Shield uses **AT+SEND=1,hello world,2,3** to simulate sending data,
++**Prerequisites: **The configuration of LG01-V2 and  LA66 Shield must match, users can use **AT+CFG** to check all configurations.
--(% style="color:red" %)**LG01v2 as Receiver: (configured as AT+RXMOD=65535,2)**
++(% style="color:red; font-weight:bold" %)**LG01-V**(% style="color:red" %)**2 as Receiver: (configured as AT+RXMOD=65535,2)**
  [[image:image-20221102140053-4.png]]
--(% style="color:red" %)**Sender: (AT+SEND=1,hello world,2,3)**
++(% style="color:red" %)**LA66 Shield as Sender: (AT+SEND=1,hello world,2,3)**
--[[image:image-20221031092053-4.png]]
++[[image:1667456058832-484.png||height="291" width="353"]]
  Instruction for Peer-to-Peer firmware:[[ **Instruction **>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]
@@ -293,49 +293,19 @@
  )))
--= **5. Build in Server** =
++Users can import this example in node-red: **[[attach:serial USB.json||target="_blank"]]**
++[[image:image-20221104100520-2.png||height="605" width="1150"]]
--The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
++= (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**-V(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820115644-1.png?width=778&height=217&rev=1.1||alt="image-20220820115644-1.png"]]
++(% style="color:blue" %)**USB TTL to LG01-V2  Connection:**
--(% style="color:red" %)**Note:**
--         **Path**: System ~-~-> Built-in Server
++Port 1 of the UART on the LG01-V2 is GND
--
--**Troubleshooting:**
--
--
--**~         1. URL does not jump properly**
--
--                For the Node-Red, you can use the local IP address and the port is 1880 to access it.
--
--
--
--== **5.1 Application Server ~-~- Node-Red** ==
--
--
--You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
--
--
--Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
--
--
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
--
--
--= (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01v2 using serial USB**(%%) =
--
--
--(% style="color:blue" %)**USB TTL to LG01v2  Connection:**
--
--
--Port 1 of the UART on the LG01v2 is GND
--
  (% class="box infomessage" %)
  (((
  **TXD  <~-~--> UART RXD (Gray line)**
@@ -346,7 +346,7 @@
  )))
--**LG01v2 UART connection photo**
++**LG01-V2 UART connection photo**
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
@@ -363,26 +363,31 @@
  = **7. FAQ** =
--== **7.1 How does LG01v2 communicate with Lora shield (LoRa.h)** ==
++== **7.1 How does LG01-V2 communicate with Lora shield (LoRa.h)** ==
--(% style="color:red" %)**Prerequisites: The configurations of LG01v2 and Lora shield must match**
++This example describes how to use LG01-V2, LoRa Shield to set up a LoRa network
--**LG01v2 configuration:**
++[[image:image-20221103152238-8.png||height="251" width="654"]]
++
++(% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
++
++**LG01-V2 configuration:**
++
  (% class="box infomessage" %)
  (((
--AT+FRE=868.100,868.100                    ~-~--> TX and RX frequency set :868100000
--AT+BW=0,0                                          ~-~--> TX and RX Bandwidth set : 125kHz
--AT+SF=12,12                                        ~-~--> TX and RX Spreading Factor
++AT+FRE=868.100,868.100                    ~-~--> TX and RX frequency set: 868100000
++AT+BW=0,0                                          ~-~--> TX and RX Bandwidth set: 125kHz
++AT+SF=12,12                                        ~-~--> TX and RX Spreading Factor set: SF12
  AT+POWER=14                                    ~-~--> TX Power Range
  AT+CRC=1,1                                         ~-~--> TX and RX CRC Type
  AT+HEADER=0,0                                  ~-~--> TX and RX Header Type
  AT+CR=1,1                                           ~-~--> TX and RX Coding Rate
  AT+IQ=0,0                                            ~-~--> TX and RX InvertIQ
--AT+PREAMBLE=8,8                              ~-~--> TX and RX Preamble Length
--AT+SYNCWORD=0                              ~-~-->  Syncword**(0: private，1: public)**
--AT+RXMOD=65535,0                          ~-~-->  Rx Timeout and Reply mode
++AT+PREAMBLE=8,8                              ~-~--> TX and RX Preamble Length set: 8
++AT+SYNCWORD=0                              ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
++AT+RXMOD=65535,0                          ~-~-->  Rx Timeout and Reply mode,RX window always open
  AT+RXDAFORM=1
  )))
@@ -393,12 +393,12 @@
  [[image:image-20221101161318-2.png]]
--**Test LG01v2 to receive Lora Shield data:**
++**Test LG01-V2 to receive Lora Shield data:**
  [[image:image-20221101161951-3.png]]
--**Test the LG01v2 to send data:**
++**Test the LG01-V2 to send data:**
  [[image:image-20221101162527-4.png]]

1667456058832-484.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+21.0 KB

Content

image-20221103142228-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+37.7 KB

Content

image-20221103142416-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+325.9 KB

Content

image-20221103143528-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+25.2 KB

Content

image-20221103143618-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+25.1 KB

Content

image-20221103144405-6.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+32.8 KB

Content

image-20221103152033-7.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+25.3 KB

Content

image-20221103152238-8.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+32.8 KB

Content

image-20221104100344-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+137.0 KB

Content

image-20221104100520-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+140.7 KB

Content

image-20221104102736-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+325.9 KB

Content

image-20221104155612-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+384.2 KB

Content

serial USB.json

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+5.1 KB

Content

@@ -1,0 +1,244 @@
++[
++    {
++        "id": "5f10779accc05655",
++        "type": "tab",
++        "label": "serial USB",
++        "disabled": false,
++        "info": "",
++        "env": []
++    },
++    {
++        "id": "4ea60ce4df40717c",
++        "type": "serial in",
++        "z": "5f10779accc05655",
++        "name": "",
++        "serial": "bb1c0e81fd51fa9e",
++        "x": 230,
++        "y": 60,
++        "wires": [
++            [
++                "a8a0db18429e7d84"
++            ]
++        ]
++    },
++    {
++        "id": "a8a0db18429e7d84",
++        "type": "debug",
++        "z": "5f10779accc05655",
++        "name": "debug 1",
++        "active": true,
++        "tosidebar": true,
++        "console": false,
++        "tostatus": false,
++        "complete": "false",
++        "statusVal": "",
++        "statusType": "auto",
++        "x": 440,
++        "y": 60,
++        "wires": []
++    },
++    {
++        "id": "fe5a93a52b6adcf1",
++        "type": "inject",
++        "z": "5f10779accc05655",
++        "name": "AT+SEND=1,hello world,0,3",
++        "props": [
++            {
++                "p": "payload"
++            }
++        ],
++        "repeat": "",
++        "crontab": "",
++        "once": false,
++        "onceDelay": 0.1,
++        "topic": "",
++        "payload": "AT+SEND=1,hello world,0,3",
++        "payloadType": "str",
++        "x": 200,
++        "y": 140,
++        "wires": [
++            [
++                "3f8add7e2e1d1d17"
++            ]
++        ]
++    },
++    {
++        "id": "3f8add7e2e1d1d17",
++        "type": "serial out",
++        "z": "5f10779accc05655",
++        "name": "",
++        "serial": "bb1c0e81fd51fa9e",
++        "x": 530,
++        "y": 140,
++        "wires": []
++    },
++    {
++        "id": "16e7d3d83d9e9415",
++        "type": "inject",
++        "z": "5f10779accc05655",
++        "name": "",
++        "props": [
++            {
++                "p": "payload"
++            }
++        ],
++        "repeat": "",
++        "crontab": "",
++        "once": false,
++        "onceDelay": 0.1,
++        "topic": "",
++        "payload": "ATZ",
++        "payloadType": "str",
++        "x": 270,
++        "y": 200,
++        "wires": [
++            [
++                "3f8add7e2e1d1d17"
++            ]
++        ]
++    },
++    {
++        "id": "09ea381519629dae",
++        "type": "inject",
++        "z": "5f10779accc05655",
++        "name": "AT+FRE",
++        "props": [
++            {
++                "p": "payload"
++            }
++        ],
++        "repeat": "",
++        "crontab": "",
++        "once": false,
++        "onceDelay": 0.1,
++        "topic": "",
++        "payload": "AT+FRE=868.100,868.100",
++        "payloadType": "str",
++        "x": 260,
++        "y": 260,
++        "wires": [
++            [
++                "3f8add7e2e1d1d17"
++            ]
++        ]
++    },
++    {
++        "id": "5167a7f904013ffd",
++        "type": "inject",
++        "z": "5f10779accc05655",
++        "name": "AT+BW",
++        "props": [
++            {
++                "p": "payload"
++            }
++        ],
++        "repeat": "",
++        "crontab": "",
++        "once": false,
++        "onceDelay": 0.1,
++        "topic": "",
++        "payload": "AT+BW=0,0",
++        "payloadType": "str",
++        "x": 270,
++        "y": 320,
++        "wires": [
++            [
++                "3f8add7e2e1d1d17"
++            ]
++        ]
++    },
++    {
++        "id": "dbe4abbc730c76e6",
++        "type": "inject",
++        "z": "5f10779accc05655",
++        "name": "AT+SF",
++        "props": [
++            {
++                "p": "payload"
++            }
++        ],
++        "repeat": "",
++        "crontab": "",
++        "once": false,
++        "onceDelay": 0.1,
++        "topic": "",
++        "payload": "AT+SF=12,12",
++        "payloadType": "str",
++        "x": 270,
++        "y": 380,
++        "wires": [
++            [
++                "3f8add7e2e1d1d17"
++            ]
++        ]
++    },
++    {
++        "id": "3be3ab296a75d512",
++        "type": "inject",
++        "z": "5f10779accc05655",
++        "name": "AT+RXMOD",
++        "props": [
++            {
++                "p": "payload"
++            }
++        ],
++        "repeat": "",
++        "crontab": "",
++        "once": false,
++        "onceDelay": 0.1,
++        "topic": "",
++        "payload": "AT+RXMOD=65535,0",
++        "payloadType": "str",
++        "x": 250,
++        "y": 440,
++        "wires": [
++            [
++                "3f8add7e2e1d1d17"
++            ]
++        ]
++    },
++    {
++        "id": "7a03d1413c60ea1c",
++        "type": "inject",
++        "z": "5f10779accc05655",
++        "name": "AT+SYNCWORD",
++        "props": [
++            {
++                "p": "payload"
++            }
++        ],
++        "repeat": "",
++        "crontab": "",
++        "once": false,
++        "onceDelay": 0.1,
++        "topic": "",
++        "payload": "AT+SYNCWORD=0",
++        "payloadType": "str",
++        "x": 240,
++        "y": 500,
++        "wires": [
++            [
++                "3f8add7e2e1d1d17"
++            ]
++        ]
++    },
++    {
++        "id": "bb1c0e81fd51fa9e",
++        "type": "serial-port",
++        "serialport": "/dev/ttyUSB0",
++        "serialbaud": "9600",
++        "databits": "8",
++        "parity": "none",
++        "stopbits": "1",
++        "waitfor": "",
++        "dtr": "none",
++        "rts": "none",
++        "cts": "none",
++        "dsr": "none",
++        "newline": "\\n",
++        "bin": "false",
++        "out": "char",
++        "addchar": "\\n",
++        "responsetimeout": "10000"
++    }
++]

Changes for page LG01v2 -- LoRa Gateway User Manual

Summary

Details

Applications

Navigation