Last modified by Kilight Cao on 2024/10/12 08:58
<
From version < 45.1 >
edited by Kilight Cao
on 2022/11/02 11:40
To version < 72.1 >
edited by Kilight Cao
on 2022/11/04 15:59
>
Change comment: Uploaded new attachment "image-20221104155949-6.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -14,16 +14,16 @@
14 14  = **1. Introduction** =
15 15  
16 16  
17 -== **1.1 What is LG01v2** ==
17 +== **1.1 What is LG01-V2** ==
18 18  
19 19  
20 20  (((
21 21  (((
22 -The LG01v2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
22 +The LG01-V2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
23 23  )))
24 24  
25 25  (((
26 -LG01v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
26 +LG01-V2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
27 27  )))
28 28  
29 29  
... ... @@ -88,7 +88,7 @@
88 88  == **1.6 Button Intruction** ==
89 89  
90 90  
91 -LG01v2 has a black toggle button, which is:
91 +LG01-V2 has a black toggle button, which is:
92 92  
93 93  
94 94  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
... ... @@ -119,7 +119,7 @@
119 119  === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
120 120  
121 121  
122 -Connect the LG01v2 Ethernet port to your router and LG01v2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01v2.
122 +Connect the LG01-V2 Ethernet port to your router and LG01-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01-V2.
123 123  
124 124  You can also use this IP to connect.
125 125  
... ... @@ -132,7 +132,7 @@
132 132  
133 133  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100542-2.png?width=1256&height=369&rev=1.1||alt="image-20220622100542-2.png"]]
134 134  
135 -The LG01v2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
135 +The LG01-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
136 136  
137 137  
138 138  (% style="color:#037691" %)**Steps to connect via fallback IP:**
... ... @@ -216,15 +216,49 @@
216 216  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220917144725-6.png?width=869&height=208&rev=1.1||alt="image-20220917144725-6.png"]]
217 217  
218 218  
219 += (% id="cke_bm_1978S" style="display:none" %)** **(%%)**4. Build in Server** =
219 219  
220 -= **4. How to configure the Lora Gateway** =
221 221  
222 +The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
222 222  
223 -== **4.1 Access the Lora configuration page** ==
224 224  
225 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820115644-1.png?width=778&height=217&rev=1.1||alt="image-20220820115644-1.png"]]
225 225  
226 -Users can access the LA66 module by running the following command, then select the option **''serial port setup"**:
227 227  
228 +(% style="color:red" %)**Note:**
229 +
230 + **Path**: System ~-~-> Built-in Server
231 +
232 +
233 +**Troubleshooting:**
234 +
235 +
236 +**~ 1. URL does not jump properly**
237 +
238 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
239 +
240 +
241 +
242 +== **4.1 Application Server ~-~- Node-Red** ==
243 +
244 +
245 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
246 +
247 +
248 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
249 +
250 +
251 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
252 +
253 +
254 += **5. How to configure the Lora Gateway** =
255 +
256 +
257 +== **5.1 Access the Lora configuration page** ==
258 +
259 +
260 +Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**:
261 +
228 228  (% class="box infomessage" %)
229 229  (((
230 230  **root@dragino-2406ef:~~# minicom -s**
... ... @@ -267,71 +267,45 @@
267 267  AT+RXDAFORM=1                              
268 268  )))
269 269  
270 -== **4.2 Example: LG01v2 Peer-to-Peer** ==
271 271  
272 -[[image:image-20221102110604-2.png]]
305 +== **5.2 Example: LG01**-**V2 Peer-to-Peer** ==
273 273  
274 -The user can run the AT command to set the LG01v2 RX window always open as a Receiver,
275 275  
308 +[[image:image-20221104102736-3.png||height="282" width="723"]]
276 276  
277 -(% style="color:red" %)**LG01v2 as Receiver: (configured as AT+RXMOD=65535,2)**
278 278  
279 -[[image:image-20221031091652-2.png]]
311 +The user can run the AT command to set the LG01-V2 RX window always open as a Receiver, the LA66 Shield uses **AT+SEND=1,hello world,2,3** to simulate sending data,
280 280  
313 +**Prerequisites: **The configuration of LG01-V2 and  LA66 Shield must match, users can use **AT+CFG** to check all configurations.
281 281  
282 -(% style="color:red" %)**Sender:**
283 283  
316 +(% style="color:red; font-weight:bold" %)**LG01-V**(% style="color:red" %)**2 as Receiver: (configured as AT+RXMOD=65535,2)**
284 284  
285 -[[image:image-20221031092053-4.png]]
318 +[[image:image-20221102140053-4.png]]
286 286  
287 287  
288 -Instruction for LA66 Peer-to-Peer firmware :[[ **Instruction **>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]
289 -)))
321 +(% style="color:red" %)**LA66 Shield as Sender: (AT+SEND=1,hello world,2,3)**
290 290  
323 +[[image:1667456058832-484.png||height="291" width="353"]]
291 291  
292 -= **5. Build in Server** =
293 293  
326 +Instruction for Peer-to-Peer firmware:[[ **Instruction **>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]
327 +)))
294 294  
295 -The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
296 296  
330 +Users can import this example in node-red: **[[attach:serial USB.json||target="_blank"]]**
297 297  
298 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820115644-1.png?width=778&height=217&rev=1.1||alt="image-20220820115644-1.png"]]
332 +[[image:image-20221104100520-2.png||height="605" width="1150"]]
299 299  
300 300  
301 -(% style="color:red" %)**Note:**
335 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**-V​​​​​​​(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
302 302  
303 - **Path**: System ~-~-> Built-in Server
304 304  
338 +(% style="color:blue" %)**USB TTL to LG01-V2  Connection:**
305 305  
306 -**Troubleshooting:**
307 307  
341 +Port 1 of the UART on the LG01-V2 is GND
308 308  
309 -**~ 1. URL does not jump properly**
310 -
311 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
312 -
313 -
314 -
315 -== **5.1 Application Server ~-~- Node-Red** ==
316 -
317 -
318 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
319 -
320 -
321 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
322 -
323 -
324 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
325 -
326 -
327 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01v2 using serial USB**(%%) =
328 -
329 -
330 -(% style="color:blue" %)**USB TTL to LG01v2  Connection:**
331 -
332 -
333 -Port 1 of the UART on the LG01v2 is GND
334 -
335 335  (% class="box infomessage" %)
336 336  (((
337 337  **TXD  <~-~--> UART RXD (Gray line)**
... ... @@ -342,7 +342,7 @@
342 342  )))
343 343  
344 344  
345 -**LG01v2 UART connection photo**
353 +**LG01-V2 UART connection photo**
346 346  
347 347  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
348 348  
... ... @@ -359,16 +359,34 @@
359 359  = **7. FAQ** =
360 360  
361 361  
362 -== **7.1 How does LG01v2 communicate with Lora shield (LoRa.h)** ==
370 +== **7.1 How does LG01-V2 communicate with Lora shield (LoRa.h)** ==
363 363  
364 364  
365 -(% style="color:red" %)Prerequisites: The configurations of LG01v2 and Lora shield must match
373 +This example describes how to use LG01-V2, LoRa Shield to set up a LoRa network
366 366  
367 -**LG01v2 configuration:**
375 +[[image:image-20221103152238-8.png||height="251" width="654"]]
368 368  
369 -[[image:image-20221101160705-1.png]]
370 370  
378 +(% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
371 371  
380 +**LG01-V2 configuration:**
381 +
382 +(% class="box infomessage" %)
383 +(((
384 +AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
385 +AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
386 +AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
387 +AT+POWER=14  ~-~--> TX Power Range
388 +AT+CRC=1,1  ~-~--> TX and RX CRC Type
389 +AT+HEADER=0,0  ~-~--> TX and RX Header Type
390 +AT+CR=1,1  ~-~--> TX and RX Coding Rate
391 +AT+IQ=0,0  ~-~--> TX and RX InvertIQ
392 +AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
393 +AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
394 +AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode,RX window always open
395 +AT+RXDAFORM=1    
396 +)))
397 +
372 372  **Lora shield configuration:**
373 373  
374 374  Lora Shield example: [[attach:LoRa_Shield_Sketch_For_MQTT.ino||target="_blank"]] , [[attach:arduino-LoRa-master.zip||target="_blank"]]
... ... @@ -376,12 +376,12 @@
376 376  [[image:image-20221101161318-2.png]]
377 377  
378 378  
379 -**Test LG01v2 to receive Lora Shield data:**
405 +**Test LG01-V2 to receive Lora Shield data:**
380 380  
381 381  [[image:image-20221101161951-3.png]]
382 382  
383 383  
384 -**Test the LG01v2 to send data:**
410 +**Test the LG01-V​​​​​​​2 to send data:**
385 385  
386 386  [[image:image-20221101162527-4.png]]
387 387  
1667456058832-484.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.0 KB
Content
image-20221102140053-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20221103140645-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +39.1 KB
Content
image-20221103142228-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.7 KB
Content
image-20221103142416-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +325.9 KB
Content
image-20221103143528-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.2 KB
Content
image-20221103143618-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20221103144405-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +32.8 KB
Content
image-20221103152033-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.3 KB
Content
image-20221103152238-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +32.8 KB
Content
image-20221104100344-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +137.0 KB
Content
image-20221104100520-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +140.7 KB
Content
image-20221104102736-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +325.9 KB
Content
image-20221104155612-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +384.2 KB
Content
image-20221104155654-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20221104155724-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +42.4 KB
Content
image-20221104155907-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +66.7 KB
Content
image-20221104155928-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.5 KB
Content
image-20221104155949-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +46.0 KB
Content
serial USB.json
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 KB
Content
... ... @@ -1,0 +1,244 @@
1 +[
2 + {
3 + "id": "5f10779accc05655",
4 + "type": "tab",
5 + "label": "serial USB",
6 + "disabled": false,
7 + "info": "",
8 + "env": []
9 + },
10 + {
11 + "id": "4ea60ce4df40717c",
12 + "type": "serial in",
13 + "z": "5f10779accc05655",
14 + "name": "",
15 + "serial": "bb1c0e81fd51fa9e",
16 + "x": 230,
17 + "y": 60,
18 + "wires": [
19 + [
20 + "a8a0db18429e7d84"
21 + ]
22 + ]
23 + },
24 + {
25 + "id": "a8a0db18429e7d84",
26 + "type": "debug",
27 + "z": "5f10779accc05655",
28 + "name": "debug 1",
29 + "active": true,
30 + "tosidebar": true,
31 + "console": false,
32 + "tostatus": false,
33 + "complete": "false",
34 + "statusVal": "",
35 + "statusType": "auto",
36 + "x": 440,
37 + "y": 60,
38 + "wires": []
39 + },
40 + {
41 + "id": "fe5a93a52b6adcf1",
42 + "type": "inject",
43 + "z": "5f10779accc05655",
44 + "name": "AT+SEND=1,hello world,0,3",
45 + "props": [
46 + {
47 + "p": "payload"
48 + }
49 + ],
50 + "repeat": "",
51 + "crontab": "",
52 + "once": false,
53 + "onceDelay": 0.1,
54 + "topic": "",
55 + "payload": "AT+SEND=1,hello world,0,3",
56 + "payloadType": "str",
57 + "x": 200,
58 + "y": 140,
59 + "wires": [
60 + [
61 + "3f8add7e2e1d1d17"
62 + ]
63 + ]
64 + },
65 + {
66 + "id": "3f8add7e2e1d1d17",
67 + "type": "serial out",
68 + "z": "5f10779accc05655",
69 + "name": "",
70 + "serial": "bb1c0e81fd51fa9e",
71 + "x": 530,
72 + "y": 140,
73 + "wires": []
74 + },
75 + {
76 + "id": "16e7d3d83d9e9415",
77 + "type": "inject",
78 + "z": "5f10779accc05655",
79 + "name": "",
80 + "props": [
81 + {
82 + "p": "payload"
83 + }
84 + ],
85 + "repeat": "",
86 + "crontab": "",
87 + "once": false,
88 + "onceDelay": 0.1,
89 + "topic": "",
90 + "payload": "ATZ",
91 + "payloadType": "str",
92 + "x": 270,
93 + "y": 200,
94 + "wires": [
95 + [
96 + "3f8add7e2e1d1d17"
97 + ]
98 + ]
99 + },
100 + {
101 + "id": "09ea381519629dae",
102 + "type": "inject",
103 + "z": "5f10779accc05655",
104 + "name": "AT+FRE",
105 + "props": [
106 + {
107 + "p": "payload"
108 + }
109 + ],
110 + "repeat": "",
111 + "crontab": "",
112 + "once": false,
113 + "onceDelay": 0.1,
114 + "topic": "",
115 + "payload": "AT+FRE=868.100,868.100",
116 + "payloadType": "str",
117 + "x": 260,
118 + "y": 260,
119 + "wires": [
120 + [
121 + "3f8add7e2e1d1d17"
122 + ]
123 + ]
124 + },
125 + {
126 + "id": "5167a7f904013ffd",
127 + "type": "inject",
128 + "z": "5f10779accc05655",
129 + "name": "AT+BW",
130 + "props": [
131 + {
132 + "p": "payload"
133 + }
134 + ],
135 + "repeat": "",
136 + "crontab": "",
137 + "once": false,
138 + "onceDelay": 0.1,
139 + "topic": "",
140 + "payload": "AT+BW=0,0",
141 + "payloadType": "str",
142 + "x": 270,
143 + "y": 320,
144 + "wires": [
145 + [
146 + "3f8add7e2e1d1d17"
147 + ]
148 + ]
149 + },
150 + {
151 + "id": "dbe4abbc730c76e6",
152 + "type": "inject",
153 + "z": "5f10779accc05655",
154 + "name": "AT+SF",
155 + "props": [
156 + {
157 + "p": "payload"
158 + }
159 + ],
160 + "repeat": "",
161 + "crontab": "",
162 + "once": false,
163 + "onceDelay": 0.1,
164 + "topic": "",
165 + "payload": "AT+SF=12,12",
166 + "payloadType": "str",
167 + "x": 270,
168 + "y": 380,
169 + "wires": [
170 + [
171 + "3f8add7e2e1d1d17"
172 + ]
173 + ]
174 + },
175 + {
176 + "id": "3be3ab296a75d512",
177 + "type": "inject",
178 + "z": "5f10779accc05655",
179 + "name": "AT+RXMOD",
180 + "props": [
181 + {
182 + "p": "payload"
183 + }
184 + ],
185 + "repeat": "",
186 + "crontab": "",
187 + "once": false,
188 + "onceDelay": 0.1,
189 + "topic": "",
190 + "payload": "AT+RXMOD=65535,0",
191 + "payloadType": "str",
192 + "x": 250,
193 + "y": 440,
194 + "wires": [
195 + [
196 + "3f8add7e2e1d1d17"
197 + ]
198 + ]
199 + },
200 + {
201 + "id": "7a03d1413c60ea1c",
202 + "type": "inject",
203 + "z": "5f10779accc05655",
204 + "name": "AT+SYNCWORD",
205 + "props": [
206 + {
207 + "p": "payload"
208 + }
209 + ],
210 + "repeat": "",
211 + "crontab": "",
212 + "once": false,
213 + "onceDelay": 0.1,
214 + "topic": "",
215 + "payload": "AT+SYNCWORD=0",
216 + "payloadType": "str",
217 + "x": 240,
218 + "y": 500,
219 + "wires": [
220 + [
221 + "3f8add7e2e1d1d17"
222 + ]
223 + ]
224 + },
225 + {
226 + "id": "bb1c0e81fd51fa9e",
227 + "type": "serial-port",
228 + "serialport": "/dev/ttyUSB0",
229 + "serialbaud": "9600",
230 + "databits": "8",
231 + "parity": "none",
232 + "stopbits": "1",
233 + "waitfor": "",
234 + "dtr": "none",
235 + "rts": "none",
236 + "cts": "none",
237 + "dsr": "none",
238 + "newline": "\\n",
239 + "bin": "false",
240 + "out": "char",
241 + "addchar": "\\n",
242 + "responsetimeout": "10000"
243 + }
244 +]

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0