Last modified by Kilight Cao on 2024/10/12 08:58
<
From version < 40.1 >
edited by Kilight Cao
on 2022/11/01 16:33
To version < 65.1 >
edited by Kilight Cao
on 2022/11/04 10:29
>
Change comment: Uploaded new attachment "serial USB.json", version {1}

Summary

Details

Page properties
Content
... ... @@ -14,16 +14,16 @@
14 14  = **1. Introduction** =
15 15  
16 16  
17 -== **1.1 What is LG01v2** ==
17 +== **1.1 What is LG01-V2** ==
18 18  
19 19  
20 20  (((
21 21  (((
22 -The LG01v2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
22 +The LG01-V2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
23 23  )))
24 24  
25 25  (((
26 -LG01v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
26 +LG01-V2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
27 27  )))
28 28  
29 29  
... ... @@ -217,13 +217,13 @@
217 217  
218 218  
219 219  
220 -= **4. How to configure the LA66 module** =
220 += **4. How to configure the Lora Gateway** =
221 221  
222 222  
223 -== **4.1 Access the LA66 module** ==
223 +== **4.1 Access the Lora configuration page** ==
224 224  
225 225  
226 -Users can access the LA66 module by running the following command, then select the option **''serial port setup"**:
226 +Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**:
227 227  
228 228  (% class="box infomessage" %)
229 229  (((
... ... @@ -249,24 +249,47 @@
249 249  
250 250  Enter **AT+CFG **in the interface to get the configuration,
251 251  
252 -[[image:image-20221029172156-1.png||height="315" width="358"]]
253 253  
253 +(% class="box infomessage" %)
254 +(((
255 +AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
256 +AT+GROUPMOD=0,0  ~-~--> TX and RX group
257 +AT+BW=0,0  ~-~--> TX and RX Bandwidth
258 +AT+SF=12,12  ~-~--> TX and RX Spreading Factor
259 +AT+POWER=14  ~-~--> TX Power Range
260 +AT+CRC=1,1  ~-~--> TX and RX CRC Type
261 +AT+HEADER=0,0  ~-~--> TX and RX Header Type
262 +AT+CR=1,1  ~-~--> TX and RX Coding Rate
263 +AT+IQ=0,0  ~-~--> TX and RX InvertIQ
264 +AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length
265 +AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
266 +AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
267 +AT+RXDAFORM=1                              
268 +)))
254 254  
255 -== **4.2 Example: LG01v2 Peer-to-Peer** ==
256 256  
271 +== **4.2 Example: LG01**-**V2 Peer-to-Peer** ==
257 257  
258 -(% style="color:red" %)**LG01v2 as Receiver: (configured as AT+RXMOD=65535,2)**
259 259  
260 -[[image:image-20221031091652-2.png]]
274 +[[image:image-20221103152033-7.png||height="281" width="620"]]
261 261  
262 262  
263 -(% style="color:red" %)**Sender:**
277 +The user can run the AT command to set the LG01-V2 RX window always open as a Receiver, the LA66 Shield uses **AT+SEND=1,hello world,2,3** to simulate sending data,
264 264  
279 +**Prerequisites: **The configuration of LG01-V2 and  LA66 Shield must match, users can use **AT+CFG** to check all configurations.
265 265  
266 -[[image:image-20221031092053-4.png]]
267 267  
282 +(% style="color:red; font-weight:bold" %)**LG01-V**(% style="color:red" %)**2 as Receiver: (configured as AT+RXMOD=65535,2)**
268 268  
269 -Instruction for LA66 Peer-to-Peer firmware :[[ **Instruction **>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]
284 +[[image:image-20221102140053-4.png]]
285 +
286 +
287 +(% style="color:red" %)**LA66 Shield as Sender: (AT+SEND=1,hello world,2,3)**
288 +
289 +[[image:1667456058832-484.png||height="291" width="353"]]
290 +
291 +
292 +Instruction for Peer-to-Peer firmware:[[ **Instruction **>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]
270 270  )))
271 271  
272 272  
... ... @@ -305,13 +305,13 @@
305 305  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
306 306  
307 307  
308 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01v2 using serial USB**(%%) =
331 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**-V​​​​​​​(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
309 309  
310 310  
311 -(% style="color:blue" %)**USB TTL to LG01v2  Connection:**
334 +(% style="color:blue" %)**USB TTL to LG01-V2  Connection:**
312 312  
313 313  
314 -Port 1 of the UART on the LG01v2 is GND
337 +Port 1 of the UART on the LG01-V2 is GND
315 315  
316 316  (% class="box infomessage" %)
317 317  (((
... ... @@ -323,7 +323,7 @@
323 323  )))
324 324  
325 325  
326 -**LG01v2 UART connection photo**
349 +**LG01-V2 UART connection photo**
327 327  
328 328  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
329 329  
... ... @@ -340,16 +340,34 @@
340 340  = **7. FAQ** =
341 341  
342 342  
343 -== **7.1 How does LG01v2 communicate with Lora shield (LoRa.h)** ==
366 +== **7.1 How does LG01-V2 communicate with Lora shield (LoRa.h)** ==
344 344  
345 345  
346 -(% style="color:red" %)Prerequisites: The configurations of LG01v2 and Lora shield must match
369 +This example describes how to use LG01-V2, LoRa Shield to set up a LoRa network
347 347  
348 -**LG01v2 configuration:**
371 +[[image:image-20221103152238-8.png||height="251" width="654"]]
349 349  
350 -[[image:image-20221101160705-1.png]]
351 351  
374 +(% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
352 352  
376 +**LG01-V2 configuration:**
377 +
378 +(% class="box infomessage" %)
379 +(((
380 +AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
381 +AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
382 +AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
383 +AT+POWER=14  ~-~--> TX Power Range
384 +AT+CRC=1,1  ~-~--> TX and RX CRC Type
385 +AT+HEADER=0,0  ~-~--> TX and RX Header Type
386 +AT+CR=1,1  ~-~--> TX and RX Coding Rate
387 +AT+IQ=0,0  ~-~--> TX and RX InvertIQ
388 +AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
389 +AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
390 +AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode,RX window always open
391 +AT+RXDAFORM=1    
392 +)))
393 +
353 353  **Lora shield configuration:**
354 354  
355 355  Lora Shield example: [[attach:LoRa_Shield_Sketch_For_MQTT.ino||target="_blank"]] , [[attach:arduino-LoRa-master.zip||target="_blank"]]
... ... @@ -357,12 +357,12 @@
357 357  [[image:image-20221101161318-2.png]]
358 358  
359 359  
360 -**Test LG01v2 to receive Lora Shield data:**
401 +**Test LG01-V2 to receive Lora Shield data:**
361 361  
362 362  [[image:image-20221101161951-3.png]]
363 363  
364 364  
365 -**Test the LG01v2 to send data:**
406 +**Test the LG01-V​​​​​​​2 to send data:**
366 366  
367 367  [[image:image-20221101162527-4.png]]
368 368  
1667456058832-484.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.0 KB
Content
image-20221102105419-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.3 KB
Content
image-20221102110604-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.9 KB
Content
image-20221102114002-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +50.1 KB
Content
image-20221102140053-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20221103140645-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +39.1 KB
Content
image-20221103142228-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.7 KB
Content
image-20221103142416-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +325.9 KB
Content
image-20221103143528-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.2 KB
Content
image-20221103143618-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20221103144405-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +32.8 KB
Content
image-20221103152033-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.3 KB
Content
image-20221103152238-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +32.8 KB
Content
image-20221104100344-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +137.0 KB
Content
image-20221104100520-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +140.7 KB
Content
image-20221104102736-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +325.9 KB
Content
serial USB.json
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 KB
Content
... ... @@ -1,0 +1,244 @@
1 +[
2 + {
3 + "id": "5f10779accc05655",
4 + "type": "tab",
5 + "label": "serial USB",
6 + "disabled": false,
7 + "info": "",
8 + "env": []
9 + },
10 + {
11 + "id": "4ea60ce4df40717c",
12 + "type": "serial in",
13 + "z": "5f10779accc05655",
14 + "name": "",
15 + "serial": "bb1c0e81fd51fa9e",
16 + "x": 230,
17 + "y": 60,
18 + "wires": [
19 + [
20 + "a8a0db18429e7d84"
21 + ]
22 + ]
23 + },
24 + {
25 + "id": "a8a0db18429e7d84",
26 + "type": "debug",
27 + "z": "5f10779accc05655",
28 + "name": "debug 1",
29 + "active": true,
30 + "tosidebar": true,
31 + "console": false,
32 + "tostatus": false,
33 + "complete": "false",
34 + "statusVal": "",
35 + "statusType": "auto",
36 + "x": 440,
37 + "y": 60,
38 + "wires": []
39 + },
40 + {
41 + "id": "fe5a93a52b6adcf1",
42 + "type": "inject",
43 + "z": "5f10779accc05655",
44 + "name": "AT+SEND=1,hello world,0,3",
45 + "props": [
46 + {
47 + "p": "payload"
48 + }
49 + ],
50 + "repeat": "",
51 + "crontab": "",
52 + "once": false,
53 + "onceDelay": 0.1,
54 + "topic": "",
55 + "payload": "AT+SEND=1,hello world,0,3",
56 + "payloadType": "str",
57 + "x": 200,
58 + "y": 140,
59 + "wires": [
60 + [
61 + "3f8add7e2e1d1d17"
62 + ]
63 + ]
64 + },
65 + {
66 + "id": "3f8add7e2e1d1d17",
67 + "type": "serial out",
68 + "z": "5f10779accc05655",
69 + "name": "",
70 + "serial": "bb1c0e81fd51fa9e",
71 + "x": 530,
72 + "y": 140,
73 + "wires": []
74 + },
75 + {
76 + "id": "16e7d3d83d9e9415",
77 + "type": "inject",
78 + "z": "5f10779accc05655",
79 + "name": "",
80 + "props": [
81 + {
82 + "p": "payload"
83 + }
84 + ],
85 + "repeat": "",
86 + "crontab": "",
87 + "once": false,
88 + "onceDelay": 0.1,
89 + "topic": "",
90 + "payload": "ATZ",
91 + "payloadType": "str",
92 + "x": 270,
93 + "y": 200,
94 + "wires": [
95 + [
96 + "3f8add7e2e1d1d17"
97 + ]
98 + ]
99 + },
100 + {
101 + "id": "09ea381519629dae",
102 + "type": "inject",
103 + "z": "5f10779accc05655",
104 + "name": "AT+FRE",
105 + "props": [
106 + {
107 + "p": "payload"
108 + }
109 + ],
110 + "repeat": "",
111 + "crontab": "",
112 + "once": false,
113 + "onceDelay": 0.1,
114 + "topic": "",
115 + "payload": "AT+FRE=868.100,868.100",
116 + "payloadType": "str",
117 + "x": 260,
118 + "y": 260,
119 + "wires": [
120 + [
121 + "3f8add7e2e1d1d17"
122 + ]
123 + ]
124 + },
125 + {
126 + "id": "5167a7f904013ffd",
127 + "type": "inject",
128 + "z": "5f10779accc05655",
129 + "name": "AT+BW",
130 + "props": [
131 + {
132 + "p": "payload"
133 + }
134 + ],
135 + "repeat": "",
136 + "crontab": "",
137 + "once": false,
138 + "onceDelay": 0.1,
139 + "topic": "",
140 + "payload": "AT+BW=0,0",
141 + "payloadType": "str",
142 + "x": 270,
143 + "y": 320,
144 + "wires": [
145 + [
146 + "3f8add7e2e1d1d17"
147 + ]
148 + ]
149 + },
150 + {
151 + "id": "dbe4abbc730c76e6",
152 + "type": "inject",
153 + "z": "5f10779accc05655",
154 + "name": "AT+SF",
155 + "props": [
156 + {
157 + "p": "payload"
158 + }
159 + ],
160 + "repeat": "",
161 + "crontab": "",
162 + "once": false,
163 + "onceDelay": 0.1,
164 + "topic": "",
165 + "payload": "AT+SF=12,12",
166 + "payloadType": "str",
167 + "x": 270,
168 + "y": 380,
169 + "wires": [
170 + [
171 + "3f8add7e2e1d1d17"
172 + ]
173 + ]
174 + },
175 + {
176 + "id": "3be3ab296a75d512",
177 + "type": "inject",
178 + "z": "5f10779accc05655",
179 + "name": "AT+RXMOD",
180 + "props": [
181 + {
182 + "p": "payload"
183 + }
184 + ],
185 + "repeat": "",
186 + "crontab": "",
187 + "once": false,
188 + "onceDelay": 0.1,
189 + "topic": "",
190 + "payload": "AT+RXMOD=65535,0",
191 + "payloadType": "str",
192 + "x": 250,
193 + "y": 440,
194 + "wires": [
195 + [
196 + "3f8add7e2e1d1d17"
197 + ]
198 + ]
199 + },
200 + {
201 + "id": "7a03d1413c60ea1c",
202 + "type": "inject",
203 + "z": "5f10779accc05655",
204 + "name": "AT+SYNCWORD",
205 + "props": [
206 + {
207 + "p": "payload"
208 + }
209 + ],
210 + "repeat": "",
211 + "crontab": "",
212 + "once": false,
213 + "onceDelay": 0.1,
214 + "topic": "",
215 + "payload": "AT+SYNCWORD=0",
216 + "payloadType": "str",
217 + "x": 240,
218 + "y": 500,
219 + "wires": [
220 + [
221 + "3f8add7e2e1d1d17"
222 + ]
223 + ]
224 + },
225 + {
226 + "id": "bb1c0e81fd51fa9e",
227 + "type": "serial-port",
228 + "serialport": "/dev/ttyUSB0",
229 + "serialbaud": "9600",
230 + "databits": "8",
231 + "parity": "none",
232 + "stopbits": "1",
233 + "waitfor": "",
234 + "dtr": "none",
235 + "rts": "none",
236 + "cts": "none",
237 + "dsr": "none",
238 + "newline": "\\n",
239 + "bin": "false",
240 + "out": "char",
241 + "addchar": "\\n",
242 + "responsetimeout": "10000"
243 + }
244 +]

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0