Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -88,7 +88,7 @@
88	88	== **1.6 Button Intruction** ==
89	89
90	90
91		-LG01-V2 has a black toggle button, which is:
	91	+LG01v2 has a black toggle button, which is:
92	92
93	93
94	94	(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
...	...	@@ -119,7 +119,7 @@
119	119	=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
120	120
121	121
122		-Connect the LG01-V2 Ethernet port to your router and LG01-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01-V2.
	122	+Connect the LG01v2 Ethernet port to your router and LG01v2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01v2.
123	123
124	124	You can also use this IP to connect.
125	125
...	...	@@ -132,7 +132,7 @@
132	132
133	133	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100542-2.png?width=1256&height=369&rev=1.1||alt="image-20220622100542-2.png"]]
134	134
135		-The LG01-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
	135	+The LG01v2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
136	136
137	137
138	138	(% style="color:#037691" %)**Steps to connect via fallback IP:**
...	...	@@ -217,10 +217,10 @@
217	217
218	218
219	219
220		-= **4. How to configure the LA66 module** =
	220	+= **4. How to configure the Lora Gateway** =
221	221
222	222
223		-== **4.1 Access the LA66 module** ==
	223	+== **4.1 Access the Lora configuration page** ==
224	224
225	225
226	226	Users can access the LA66 module by running the following command, then select the option **''serial port setup"**:
...	...	@@ -249,8 +249,23 @@
249	249
250	250	Enter **AT+CFG **in the interface to get the configuration,
251	251
252		-[[image:image-20221029172156-1.png||height="315" width="358"]]
253	253
	253	+(% class="box infomessage" %)
	254	+(((
	255	+AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
	256	+AT+GROUPMOD=0,0  ~-~--> TX and RX group
	257	+AT+BW=0,0  ~-~--> TX and RX Bandwidth
	258	+AT+SF=12,12  ~-~--> TX and RX Spreading Factor
	259	+AT+POWER=14  ~-~--> TX Power Range
	260	+AT+CRC=1,1  ~-~--> TX and RX CRC Type
	261	+AT+HEADER=0,0  ~-~--> TX and RX Header Type
	262	+AT+CR=1,1  ~-~--> TX and RX Coding Rate
	263	+AT+IQ=0,0  ~-~--> TX and RX InvertIQ
	264	+AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length
	265	+AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
	266	+AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
	267	+AT+RXDAFORM=1
	268	+)))
254	254
255	255	== **4.2 Example: LG01v2 Peer-to-Peer** ==
256	256