Changes for page LG01v2 -- LoRa Gateway User Manual

Last modified by Kilight Cao on 2024/10/12 08:58

From version < 33.1 >

edited by Kilight Cao
on 2022/11/01 16:11

To version < 24.1 >

edited by Kilight Cao
on 2022/10/31 09:48

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)
Attachments (0 modified, 0 added, 3 removed)

Details

Page properties

Content

@@ -102,7 +102,7 @@
--= **2. Quick Start** =
++= ** 2. Quick Start** =
  The LG01-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
@@ -217,132 +217,166 @@
--= **4. How to configure the LA66 module** =
++= **4. Build-in Server** =
--== **4.1 Access the LA66 module** ==
++The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
--Users can access the LA66 module by running the following command, then select the option **''serial port setup"**:
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820115644-1.png?width=778&height=217&rev=1.1||alt="image-20220820115644-1.png"]]
--(% class="box infomessage" %)
--(((
--**root@dragino-2406ef:~~# minicom -s**
--)))
--[[image:image-20221029174637-2.png||height="410" width="524"]]
++(% style="color:red" %)**Note:**
++         **Path**: System ~-~-> Built-in Server
--And then, change the setting:
--(% class="box infomessage" %)
--(((
--**Serial Device :** **/dev/ttyUSB0**
++**Troubleshooting:**
--**Bps/Par/Bits : 9600 8N1**
--)))
++**~         1. URL does not jump properly**
--(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**(%%)
--(% style="color:red" %)[[image:image-20221029174703-3.png]]
++                For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
++                For the Node-Red, you can use the local IP address and the port is 1880 to access it.
--Enter **AT+CFG **in the interface to get the configuration,
--[[image:image-20221029172156-1.png||height="315" width="358"]]
++== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
--== **4.2 Example: LG01v2 Peer-to-Peer** ==
++You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
--(% style="color:red" %)**LG01v2 as Receiver: (configured as AT+RXMOD=65535,2)**
++Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
--[[image:image-20221031091652-2.png]]
++Login account:
--(% style="color:red" %)**Sender:**
++**User ID: **            ** (% style="background-color:yellow" %)admin(%%)**
++**Password: **        ** (% style="background-color:yellow" %)dragino(%%)**
--[[image:image-20221031092053-4.png]]
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725171719-1.png?width=769&height=570&rev=1.1||alt="image-20220725171719-1.png"]]
--Instruction for LA66 Peer-to-Peer firmware :[[ **Instruction **>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]
--)))
--= **5. Build in Server** =
++== **4.2 Application Server ~-~- Node-Red** ==
--The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
++You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820115644-1.png?width=778&height=217&rev=1.1||alt="image-20220820115644-1.png"]]
++Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
--(% style="color:red" %)**Note:**
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
--         **Path**: System ~-~-> Built-in Server
--**Troubleshooting:**
++= **5. How users can access LG01v2 using serial USB** =
--**~         1. URL does not jump properly**
++(% style="color:blue" %)**USB TTL to LG01v2  Connection:**
--                For the Node-Red, you can use the local IP address and the port is 1880 to access it.
++Port 1 of the UART on the LG01v2 is GND
++(% class="box infomessage" %)
++(((
++**TXD  <~-~--> UART RXD (Gray line)**
--== **5.1 Application Server ~-~- Node-Red** ==
++**RXD  <~-~--> UART TXD (White line)**
++**GND <~-~--> GND (Black line)**
++)))
--You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
++**LG01v2 UART connection photo**
--Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
++In the PC, you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LG01v2. LG01v2 will output system info once power on as below:
--= (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01v2 using serial USB**(%%) =
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
--(% style="color:blue" %)**USB TTL to LG01v2  Connection:**
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
++= **3. How to configure the LA66 module** =
--Port 1 of the UART on the LG01v2 is GND
++== **3.1 Access the LA66 module** ==
++
++
++Users can access the LA66 module by running the following command, then select the option **''serial port setup"**:
++
  (% class="box infomessage" %)
  (((
--**TXD  <~-~--> UART RXD (Gray line)**
++**root@dragino-2406ef:~~# minicom -s**
++)))
--**RXD  <~-~--> UART TXD (White line)**
++[[image:image-20221029174637-2.png||height="410" width="524"]]
--**GND <~-~--> GND (Black line)**
++
++And then, change the setting:
++
++(% class="box infomessage" %)
++(((
++**Serial Device :** **/dev/ttyUSB0**
++
++**Bps/Par/Bits : 9600 8N1**
  )))
--**LG01v2 UART connection photo**
++(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**(%%)
++(% style="color:red" %)[[image:image-20221029174703-3.png]]
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
++Enter **AT+CFG **in the interface to get the configuration,
++[[image:image-20221029172156-1.png||height="315" width="358"]]
--In the PC, you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LG01v2. LG01v2 will output system info once power on as below:
++LG01v2 Peer-to-Peer example:
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
++(% style="color:red" %)**LG01v2 as Receiver: (configured as AT+RXMOD=65535,2)**
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
++[[image:image-20221031091652-2.png]]
--= **7. FAQ** =
++(% style="color:red" %)**Sender:**
--7.1
++[[image:image-20221031092053-4.png]]
++Instruction for LA66 Peer-to-Peer firmware :[[ **Instruction **>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]
++)))
++
++= **7. Trouble Shooting** =
++
++
++== 7.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
++
++
++
++
++This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
++
++By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
++
++
++So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
++
++**Click the update URL button to configure the URL with the current eth port address.**
++
++
++
++
++
  = (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =

LoRa_Shield_Sketch_For_MQTT.ino

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-2.9 KB

Content

@@ -1,118 +1,0 @@
--#include <SPI.h>
--#include <LoRa.h>
--
--// This is the LoRa Node side sketch for the MQTT example: http://wiki.dragino.com/index.php?title=MQTT_Forward_Instruction#Example_to_communicate_to_a_simple_MQTT_server
--
--float tem,hum;
--char tem_1[8]={"\0"},hum_1[8]={"\0"};
--char *node_id = "<4567>";  //From LG01 via web Local Channel settings on MQTT.Please refer <> dataformat in here.
--uint8_t datasend[36];
--unsigned int count = 1;
--unsigned long new_time,old_time=0;
--
--void setup()
--{
--      Serial.begin(9600);
--      while (!Serial);
--      Serial.println(F("Start MQTT Example"));
--      if (!LoRa.begin(868100000))   //868000000 is frequency
--      {
--          Serial.println("Starting LoRa failed!");
--          while (1);
--      }
--      // Setup Spreading Factor (6 ~ 12)
--      LoRa.setSpreadingFactor(12);
--
--      // Setup BandWidth, option: 7800,10400,15600,20800,31250,41700,62500,125000,250000,500000
--      //Lower BandWidth for longer distance.
--      LoRa.setSignalBandwidth(125000);
--
--      // Setup Coding Rate:5(4/5),6(4/6),7(4/7),8(4/8)
--      LoRa.setCodingRate4(5);
--      LoRa.setSyncWord(0x12);
--      void disableCrc();
--      LoRa.disableInvertIQ();
--      LoRa.explicitHeaderMode();
--      Serial.println("LoRa init succeeded.");
--      LoRa.onReceive(onReceive);
--      LoRa.receive();
--}
--
--void dhtTem()
--{
--       tem = random(15,40);
--       hum = random(40,80);
--       Serial.println(F("The temperature and humidity:"));
--       Serial.print("[");
--       Serial.print(tem);
--       Serial.print("℃");
--       Serial.print(",");
--       Serial.print(hum);
--       Serial.print("%");
--       Serial.print("]");
--       Serial.println("");
--}
--void dhtWrite()
--{
--    char data[50] = "\0";
--    //for(int i = 0; i < 50; i++)
--    //{
--    //   data[i] = node_id[i];
--    //}
--
--    dtostrf(tem,0,1,tem_1);
--    dtostrf(hum,0,1,hum_1);
--
--    // Serial.println(tem_1);
--     strcat(data,"tem=");
--     strcat(data,tem_1);
--     strcat(data,"&hum=");
--     strcat(data,hum_1);
--     strcpy((char *)datasend,data);
--
--   //Serial.println((char *)datasend);
--    //Serial.println(sizeof datasend);
--
--}
--
--
--void SendData()
--{
--     LoRa.beginPacket();
--     LoRa.print((char *)datasend);
--     LoRa.endPacket();
--     Serial.println("Packet Sent");
--}
--
--
--
--void loop()
--{
--    new_time=millis();
--    if (new_time - old_time >= 30000 || old_time == 0)
--    {
--      old_time = new_time;
--      Serial.print("###########    ");
--      Serial.print("COUNT=");
--      Serial.print(count);
--      Serial.println("    ###########");
--      count++;
--      dhtTem();
--      dhtWrite();
--      SendData();
--      LoRa.receive();
--    }
--}
--
--void onReceive(int packetSize) {
--
--  // received a packet
--  Serial.print("Received packet : ");
--
--  // read packet
--  for (int i = 0; i < packetSize; i++) {
--      Serial.print((char)LoRa.read());
--  }
--  Serial.print("\n\r");
--}
--

arduino-LoRa-master.zip

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-29.6 KB

Content

image-20221101160705-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-6.1 KB

Content

Changes for page LG01v2 -- LoRa Gateway User Manual

Summary

Details

Applications

Navigation