Last modified by Kilight Cao on 2024/10/12 08:58
<
From version < 26.1 >
edited by Kilight Cao
on 2022/10/31 09:54
To version < 113.1 >
edited by Kilight Cao
on 2023/05/04 09:55
>
Change comment: Uploaded new attachment "image-20230504095502-2.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -11,9 +11,13 @@
11 11  
12 12  {{toc/}}
13 13  
14 -= **1. Introduction** =
15 15  
16 16  
16 +
17 +
18 +
19 += **1. Introduction** =
20 +
17 17  == **1.1 What is LG01v2** ==
18 18  
19 19  
... ... @@ -20,14 +20,17 @@
20 20  (((
21 21  (((
22 22  The LG01v2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 +
28 +LG01v2 is specially design for (% style="color:green" %)**peer to peer LoRa**(%%) protocol instead of LoRaWAN protocol. The LG01v2 use single channel LoRa module to minimize the deployment cost for a private p2p LoRa wireless network.
23 23  )))
24 24  
25 25  (((
32 +LG01v2 uses Open Source Linux system. User can modify the Linux part and develop customize software base on it. It has (% style="color:green" %)**1.2Ghz Quad-Core CPU**(%%) , (% style="color:green" %)**4GB eMMC storage**(%%) and (% style="color:green" %)**512MB RAM**(%%) for most application.
33 +
26 26  LG01v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
27 27  )))
28 28  
29 29  
30 -
31 31  == **1.2 Specifications** ==
32 32  
33 33  
... ... @@ -56,7 +56,6 @@
56 56  * Remote Management
57 57  * Auto-provisioning for batch deployment and management
58 58  * LoRa Gateway
59 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
60 60  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
61 61  
62 62  == **1.4 Block Diagram** ==
... ... @@ -84,7 +84,6 @@
84 84  (% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
85 85  
86 86  
87 -
88 88  == **1.6 Button Intruction** ==
89 89  
90 90  
... ... @@ -101,10 +101,9 @@
101 101   //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
102 102  
103 103  
109 += **2. Quick Start** =
104 104  
105 -= ** 2. Quick Start** =
106 106  
107 -
108 108  The LG01-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
109 109  
110 110  In most cases, the first thing you need to do is make the LG01-v2 accessible to the network.
... ... @@ -112,7 +112,6 @@
112 112  
113 113  == **2.1 Connects to the network and accesses the gateway Web UI** ==
114 114  
115 -
116 116  == **2.1.1 connect the network.** ==
117 117  
118 118  
... ... @@ -132,99 +132,105 @@
132 132  
133 133  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100542-2.png?width=1256&height=369&rev=1.1||alt="image-20220622100542-2.png"]]
134 134  
135 -The LG01-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
136 136  
139 +Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
137 137  
138 -(% style="color:#037691" %)**Steps to connect via fallback IP:**
139 139  
140 -~1. Connect PC's Ethernet port to LG01-V2's WAN port
142 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102702-6.png?rev=1.1||alt="image-20220622102702-6.png"]]
141 141  
142 -2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
143 143  
145 +**Wi-Fi configuration successful**
144 144  
145 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622101433-4.png?rev=1.1||alt="image-20220622101433-4.png"]]
146 146  
148 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102847-7.png?rev=1.1||alt="image-20220622102847-7.png"]]
147 147  
148 -and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LG01-V2 via Web or Console.
149 149  
151 += **3. Web Configure Pages** =
150 150  
151 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102210-5.png?width=919&height=504&rev=1.1||alt="image-20220622102210-5.png"]]
153 +== **3.1 Home** ==
152 152  
153 153  
154 -Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
156 +//Shows the system running status~://
155 155  
158 +[[image:image-20221104155612-1.png||height="497" width="942"]]
156 156  
157 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102702-6.png?rev=1.1||alt="image-20220622102702-6.png"]]
158 158  
161 +== **3.2 Network Settings** ==
159 159  
160 -**Wi-Fi configuration successful**
163 +=== **3.2.1 Network ~-~-> WiFi** ===
161 161  
162 162  
163 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102847-7.png?rev=1.1||alt="image-20220622102847-7.png"]]
166 +[[image:image-20221104155654-2.png||height="319" width="813"]]
164 164  
165 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?width=938&height=476&rev=1.1||alt="image-20220622102901-8.png"]]
166 166  
169 +=== **3.4.2 Network ~-~-> System Status** ===
167 167  
168 -= **3. Web Configure Pages** =
169 169  
170 -== **3.1 Home** ==
172 +[[image:image-20221104155724-3.png||height="679" width="861"]]
171 171  
172 -//Shows the system running status~://
173 173  
174 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
175 +=== **3.4.3 Network ~-~-> Firewall** ===
175 175  
176 176  
177 -== **3.2 Network Settings** ==
178 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616115351-6.png?width=661&height=244&rev=1.1||alt="image-20220616115351-6.png"]]
178 178  
179 179  
180 -=== **3.2.1 Network ~-~-> WiFi** ===
181 +== **3.5 System** ==
181 181  
183 +=== **3.5.1  System ~-~-> System Overview** ===
182 182  
183 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616114756-4.png?width=669&height=251&rev=1.1||alt="image-20220616114756-4.png"]]
184 184  
186 +Shows the system info:
185 185  
188 +[[image:image-20221104155907-4.png]]
186 186  
187 -=== **3.4.2 Network ~-~-> System Status** ===
188 188  
191 +=== **3.5.2 System ~-~-> Backup/Restore** ===
189 189  
190 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820134112-2.png?width=668&height=539&rev=1.1||alt="image-20220820134112-2.png"]]
191 191  
194 +[[image:image-20221104155928-5.png||height="334" width="880"]]
192 192  
193 193  
194 -=== **3.4.3 Network ~-~-> Firewall** ===
197 += (% id="cke_bm_1978S" style="display:none" %)** **(%%)**4. Build in Server** =
195 195  
196 196  
197 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616115351-6.png?width=661&height=244&rev=1.1||alt="image-20220616115351-6.png"]]
200 +The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
198 198  
199 199  
203 +[[image:image-20221104155949-6.png||height="315" width="1023"]]
200 200  
201 -== **3.5 System** ==
202 202  
206 +(% style="color:red" %)**Note:**
203 203  
204 -=== **3.5.1  System ~-~-> System Overview** ===
208 + **Path**: System ~-~-> Built-in Server
205 205  
206 206  
207 -Shows the system info:
211 +(% style="color:blue" %)**Troubleshooting：**
208 208  
209 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220917144512-5.png?width=853&height=618&rev=1.1||alt="image-20220917144512-5.png"]]
213 +**~ 1. URL does not jump properly**
210 210  
215 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
211 211  
212 212  
213 -=== **3.5.2 System ~-~-> Backup/Restore** ===
218 +== **4.1 Application Server ~-~- Node-Red** ==
214 214  
215 215  
216 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220917144725-6.png?width=869&height=208&rev=1.1||alt="image-20220917144725-6.png"]]
221 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
217 217  
218 218  
224 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
219 219  
220 -= **4. How to configure the LA66 module** =
221 221  
227 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
222 222  
223 -== **4.1 Access the LA66 module** ==
224 224  
230 += **5. How to configure the Lora Gateway** =
225 225  
226 -Users can access the LA66 module by running the following command, then select the option **''serial port setup"**:
232 +== **5.1 Configure and Debug LoRa wireless of LG01v2** ==
227 227  
234 +
235 +Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**:
236 +
228 228  (% class="box infomessage" %)
229 229  (((
230 230  **root@dragino-2406ef:~~# minicom -s**
... ... @@ -243,91 +243,190 @@
243 243  )))
244 244  
245 245  
246 -(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**(%%)
255 +(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**
256 +
257 +
247 247  (% style="color:red" %)[[image:image-20221029174703-3.png]]
248 248  
249 249  
250 250  Enter **AT+CFG **in the interface to get the configuration,
251 251  
252 -[[image:image-20221029172156-1.png||height="315" width="358"]]
253 253  
264 +(% class="box infomessage" %)
265 +(((
266 +**AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
267 +AT+GROUPMOD=0,0  ~-~-->  TX and RX group
268 +AT+BW=0,0  ~-~-->  TX and RX Bandwidth
269 +AT+SF=12,12  ~-~-->  TX and RX Spreading Factor
270 +AT+POWER=14  ~-~-->  TX Power Range
271 +AT+CRC=1,1  ~-~-->  TX and RX CRC Type
272 +AT+HEADER=0,0  ~-~-->  TX and RX Header Type
273 +AT+CR=1,1  ~-~-->  TX and RX Coding Rate
274 +AT+IQ=0,0  ~-~-->  TX and RX InvertIQ
275 +AT+PREAMBLE=8,8  ~-~-->  TX and RX Preamble Length
276 +AT+SYNCWORD=0  ~-~-->  Syncword(0: private，1: public)
277 +AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
278 +AT+RXDAFORM=1**                              
279 +)))
254 254  
255 -LG01v2 Peer-to-Peer example:
256 256  
257 -(% style="color:red" %)**LG01v2 as Receiver: (configured as AT+RXMOD=65535,2)**
282 +== **5.2 Example: LG01v2** ==
258 258  
259 -[[image:image-20221031091652-2.png]]
284 +=== **5.2.1 Introduce for the example:** ===
260 260  
261 261  
262 -(% style="color:red" %)**Sender:**
287 +[[image:image-20221104102736-3.png||height="282" width="723"]]
263 263  
264 264  
265 -[[image:image-20221031092053-4.png]]
290 +In this example, there are two devices:
266 266  
292 +* **LA66 Shield + UNO + DHT11**: The UNO will get the temperature and humidity and broadcast the value via LoRa protocol.
293 +* **LG01v2** : LG01v2 is set to listening the LoRa Channel which LA66 is broadcasting. When LG01v2 get the data from LA66, LG01v2 will plot the data in built-in IoT server.
267 267  
268 -Instruction for LA66 Peer-to-Peer firmware :[[ **Instruction **>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]
295 +=== **5.2.2 Set Up LA66 Shield + UNO** ===
296 +
297 +
298 +==== **Set up LA66 Module** ====
299 +
300 +
301 +LA66 Module is loaded with the firmware **[[LA66 Peer-to-Peer firmware>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]] **and user can use AT Command to set up LA66 with below parameters:
302 +
303 +(((
304 +(% style="color:red" %)**LA66 Shield as Sender: **
305 +
306 +(% class="box infomessage" %)
307 +(((
308 +**LA66 Shield configuration:**
309 +
310 +AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
311 +AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
312 +AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
313 +AT+POWER=14  ~-~--> TX Power Range set: 14dBm
314 +AT+CRC=1,1  ~-~--> TX and RX CRC Type
315 +AT+HEADER=0,0  ~-~--> TX and RX Header Type
316 +AT+CR=1,1  ~-~--> TX and RX Coding Rate
317 +AT+IQ=0,0  ~-~--> TX and RX InvertIQ
318 +AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
319 +AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
320 +AT+RXMOD=6,0  ~-~-->  Rx Timeout and Reply mode
269 269  )))
322 +)))
270 270  
271 271  
272 -= (% id="cke_bm_262449S" style="display:none" %)** **(%%)**5. Build-in Server** =
273 273  
326 +==== **Set up Arduino UNO** ====
274 274  
275 -The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
328 +(% id="cke_bm_1033249S" style="display:none" %)** **
276 276  
330 +**Hardware Connection**
277 277  
278 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820115644-1.png?width=778&height=217&rev=1.1||alt="image-20220820115644-1.png"]]
332 +(% class="box infomessage" %)
333 +(((
334 +**The DHT11 sensor connects to the LA66 Shield:**
279 279  
336 +**VCC  <~-~--> 3.3V (Red line)**
337 +**DATA <~-~--> PIN8 (Purple line)**
338 +**GND  <~-~--> GND (White line)**
339 +)))
280 280  
281 -(% style="color:red" %)**Note:**
341 +[[image:image-20221108170731-5.png||height="588" width="441"]]
282 282  
283 - **Path**: System ~-~-> Built-in Server
284 284  
285 285  
286 -**Troubleshooting:**
345 +===== **1. Open Arduino IDE** =====
287 287  
288 288  
289 -**~ 1. URL does not jump properly**
348 +[[image:image-20221108172149-6.png||height="650" width="542"]]
290 290  
291 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
292 292  
293 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
294 294  
352 +===== **2. Open project** =====
295 295  
296 296  
297 -== **5.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
355 +Users can download Arduino files from this link: [[attach:Log-Temperature-Sensor-and-send-data-to-Node-red.ino||target="_blank"]]
298 298  
357 +Then click Compile and Upload to LA66 Shield,
299 299  
300 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
359 +[[image:image-20221108172432-7.png]]
301 301  
302 -Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
303 303  
304 304  
305 -Login account:
363 +===== **3. Open the Serial Monitor to check the LA66 Shield data** =====
306 306  
307 -**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
308 308  
309 -**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
366 +The UNO will now reads the temperature and humidity data from the sensor and broadcast it via LoRa wireless,
310 310  
368 +[[image:image-20221108174840-8.png||height="731" width="671"]]
311 311  
312 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725171719-1.png?width=769&height=570&rev=1.1||alt="image-20220725171719-1.png"]]
313 313  
314 314  
372 +Sending out data as below.
315 315  
316 -== **5.2 Application Server ~-~- Node-Red** ==
374 +[[image:image-20221108175113-9.png||height="556" width="998"]]
317 317  
318 318  
319 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
377 +=== **5.2.3 Set Up LG01v2** ===
320 320  
321 321  
322 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
380 +Configure LG01v2 LoRa channel parameters so it can get data from LA66 Shield
323 323  
382 +(% style="color:red; font-weight:bold" %)**LG01v**(% style="color:red" %)**2 as Receiver: (configured as AT+RXMOD=65535,2)**
324 324  
325 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
384 +(% class="box infomessage" %)
385 +(((
386 +**LG01-V2 configuration:**
326 326  
388 +AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
389 +AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
390 +AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
391 +AT+POWER=14  ~-~--> TX Power Range set: 14dBm
392 +AT+CRC=1,1  ~-~--> TX and RX CRC Type
393 +AT+HEADER=0,0  ~-~--> TX and RX Header Type
394 +AT+CR=1,1  ~-~--> TX and RX Coding Rate
395 +AT+IQ=0,0  ~-~--> TX and RX InvertIQ
396 +AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
397 +AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
398 +AT+RXMOD=65535,2  ~-~-->  Rx Timeout and Reply mode, RX window always open**(0:No ACK, 1:Reply mode, 2:Send an ACK once got a message from another device. ACK Content is 0x00 FF )**
399 +)))
327 327  
328 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01v2 using serial USB**(%%) =
329 329  
402 +=== **5.2.4 Test result** ===
330 330  
404 +
405 +After the above configuration is complete, users can send test simulation data to check whether the configuration is correct, In LA66 sheild serial console send:(% style="color:red" %)**(AT+SEND=1,hello world,2,3).**
406 +)))
407 +
408 +When LG01v2 replies with ACK when it receives a packet sent by LA66 sheild.
409 +
410 +[[image:image-20221108164413-2.png]]
411 +
412 +
413 +
414 +In the real-time log of LG01v2：
415 +
416 +[[image:image-20221108170314-3.png]]
417 +
418 +
419 +=== **5.2.5 Plot data chart in LG01v2** ===
420 +
421 +
422 +User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
423 +
424 +User can import this example in Node-Red: [[attach:Log-Temperature-Sensor-and-send-data-to-Node-red.json||target="_blank"]]
425 +
426 +[[image:image-20221108180334-10.png||height="651" width="1141"]]
427 +
428 +
429 +The temperature and humidity chart is displayed in the built-in node-red UI
430 +
431 +**Browser input: (% style="background-color:yellow" %)__//http:~/~/<local-IPV4-address>//__(%%)**
432 +
433 +[[image:image-20221108180458-11.png||height="402" width="1137"]]
434 +
435 +
436 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**v(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
437 +
438 +
331 331  (% style="color:blue" %)**USB TTL to LG01v2  Connection:**
332 332  
333 333  
... ... @@ -354,34 +354,112 @@
354 354  
355 355  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
356 356  
465 +
357 357  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
358 358  
359 359  
360 -= **7. Trouble Shooting** =
469 += **7. OTA System Update** =
361 361  
362 362  
363 -== 7.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
472 +LG01v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
364 364  
365 365  
475 += **8. FAQ** =
366 366  
477 +== **8.1 How does LG01v2 communicate with Lora shield (LoRa.h)** ==
367 367  
368 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
369 369  
370 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
480 +This example describes how to use LG01v2, LoRa Shield to set up a LoRa network,
371 371  
482 +[[image:image-20221103152238-8.png||height="251" width="654"]]
372 372  
373 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
374 374  
375 -**Click the update URL button to configure the URL with the current eth port address.**
485 +(% style="color:red" %)**Prerequisites: The configurations of LG01v2 and Lora shield must match**
376 376  
487 +**LG01v2 configuration:**
377 377  
489 +(% class="box infomessage" %)
490 +(((
491 +AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
492 +AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
493 +AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
494 +AT+POWER=14  ~-~--> TX Power Range
495 +AT+CRC=1,1  ~-~--> TX and RX CRC Type
496 +AT+HEADER=0,0  ~-~--> TX and RX Header Type
497 +AT+CR=1,1  ~-~--> TX and RX Coding Rate
498 +AT+IQ=0,0  ~-~--> TX and RX InvertIQ
499 +AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
500 +AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
501 +AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode,RX window always open
502 +AT+RXDAFORM=1    
503 +)))
378 378  
379 379  
380 380  
381 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
507 +**Lora shield configuration:**
382 382  
509 +Lora Shield example: [[attach:LoRa_Shield_Sketch_For_MQTT.ino||target="_blank"]] , [[attach:arduino-LoRa-master.zip||target="_blank"]]
383 383  
511 +[[image:image-20221101161318-2.png]]
512 +
513 +
514 +
515 +**Test LG01v2 to receive Lora Shield data:**
516 +
517 +[[image:image-20221101161951-3.png]]
518 +
519 +
520 +
521 +**Test the LG01v2 to send data:**
522 +
523 +[[image:image-20221101162527-4.png]]
524 +
525 +
526 +== **8.2 How does LG01v2 communicate with Heltec LoRa Node** ==
527 +
528 +
529 +This example describes how to use LG01v2 and Heltec LoRa Node to set up a LoRa network,
530 +
531 +[[image:image-20221112161111-2.png||height="258" width="692"]]
532 +
533 +(% style="color:red" %)**Prerequisites: The configurations of LG01v2 and Lora shield must match**
534 +
535 +
536 +**LG01v2 configuration:**
537 +
538 +(% class="box infomessage" %)
384 384  (((
540 +AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
541 +AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
542 +AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
543 +AT+POWER=14  ~-~--> TX Power Range
544 +AT+CRC=1,1  ~-~--> TX and RX CRC Type
545 +AT+HEADER=0,0  ~-~--> TX and RX Header Type
546 +AT+CR=1,1  ~-~--> TX and RX Coding Rate
547 +AT+IQ=0,0  ~-~--> TX and RX InvertIQ
548 +AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
549 +AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
550 +AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode,RX window always open
551 +AT+RXDAFORM=1  ~-~--> RX data format**（0: Hex ,1: String）**
552 +)))
553 +
554 +
555 +After we upload the sketch to Heltec LoRa Node, we can see below output from Arduino.
556 +
557 +Lora Shield example: [[attach:LoRa_send_trial.ino||target="_blank"]]
558 +
559 +[[image:image-20221112162733-3.png||height="524" width="927"]]
560 +
561 +
562 +And we can see the logread of gateway as below, means the packet arrive gateway:
563 +
564 +[[image:image-20221112163119-4.png||height="808" width="560"]]
565 +
566 +
567 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**9. Supports**(%%) =
568 +
569 +
570 +(((
385 385  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
386 386  )))
387 387  
... ... @@ -389,29 +389,24 @@
389 389  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
390 390  
391 391  
578 += **10. Reference** =
392 392  
393 -= **9. Reference** =
394 394  
581 +* Install Tago Core: Refer **Install Tago Core in LG01v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
582 +* [[Advance OS Reference Guide for L>>doc:Main.Armbian OS instruction.WebHome]]G01v2.
395 395  
396 -* Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
397 -* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
398 -
399 399  
400 400  )))
401 401  
402 -= **10. Order Info** =
587 += **11. Order Info** =
403 403  
404 404  
405 -(% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
590 +(% style="color:#0000ff" %)**LG01v2-XXX-YYY**
406 406  
407 407  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
408 408  
409 -* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
410 -* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
411 -* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
412 -* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
413 -* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
414 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
594 +* (% style="color:red" %)**868**(%%): For frequency : 863 ~~ 870Mhz
595 +* (% style="color:red" %)**915**(%%): For frequency : 902 ~~ 928Mhz
415 415  
416 416  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
417 417  
... ... @@ -423,10 +423,9 @@
423 423  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
424 424  
425 425  
607 += **12. Manufacturer Info** =
426 426  
427 -= **10. Manufacturer Info** =
428 428  
429 -
430 430  **Shenzhen Dragino Technology Development co. LTD**
431 431  
432 432  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -434,10 +434,9 @@
434 434  LongCheng Street, LongGang District ; Shenzhen 518116,China
435 435  
436 436  
617 += **13. FCC Warning** =
437 437  
438 -= **11. FCC Warning** =
439 439  
440 -
441 441  (((
442 442  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
443 443  )))
... ... @@ -467,7 +467,6 @@
467 467  (((
468 468  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
469 469  
649 +
470 470  
471 471  )))
472 -
473 -~)~)~)
1667456058832-484.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.0 KB
Content
LoRa_Shield_Sketch_For_MQTT.ino
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +2.9 KB
Content
... ... @@ -1,0 +1,118 @@
1 +#include <SPI.h>
2 +#include <LoRa.h>
3 +
4 +// This is the LoRa Node side sketch for the MQTT example: http://wiki.dragino.com/index.php?title=MQTT_Forward_Instruction#Example_to_communicate_to_a_simple_MQTT_server
5 +
6 +float tem,hum;
7 +char tem_1[8]={"\0"},hum_1[8]={"\0"};
8 +char *node_id = "<4567>"; //From LG01 via web Local Channel settings on MQTT.Please refer <> dataformat in here.
9 +uint8_t datasend[36];
10 +unsigned int count = 1;
11 +unsigned long new_time,old_time=0;
12 +
13 +void setup()
14 +{
15 + Serial.begin(9600);
16 + while (!Serial);
17 + Serial.println(F("Start MQTT Example"));
18 + if (!LoRa.begin(868100000)) //868000000 is frequency
19 + {
20 + Serial.println("Starting LoRa failed!");
21 + while (1);
22 + }
23 + // Setup Spreading Factor (6 ~ 12)
24 + LoRa.setSpreadingFactor(12);
25 +
26 + // Setup BandWidth, option: 7800,10400,15600,20800,31250,41700,62500,125000,250000,500000
27 + //Lower BandWidth for longer distance.
28 + LoRa.setSignalBandwidth(125000);
29 +
30 + // Setup Coding Rate:5(4/5),6(4/6),7(4/7),8(4/8)
31 + LoRa.setCodingRate4(5);
32 + LoRa.setSyncWord(0x12);
33 + void disableCrc();
34 + LoRa.disableInvertIQ();
35 + LoRa.explicitHeaderMode();
36 + Serial.println("LoRa init succeeded.");
37 + LoRa.onReceive(onReceive);
38 + LoRa.receive();
39 +}
40 +
41 +void dhtTem()
42 +{
43 + tem = random(15,40);
44 + hum = random(40,80);
45 + Serial.println(F("The temperature and humidity:"));
46 + Serial.print("[");
47 + Serial.print(tem);
48 + Serial.print("℃");
49 + Serial.print(",");
50 + Serial.print(hum);
51 + Serial.print("%");
52 + Serial.print("]");
53 + Serial.println("");
54 +}
55 +void dhtWrite()
56 +{
57 + char data[50] = "\0";
58 + //for(int i = 0; i < 50; i++)
59 + //{
60 + // data[i] = node_id[i];
61 + //}
62 +
63 + dtostrf(tem,0,1,tem_1);
64 + dtostrf(hum,0,1,hum_1);
65 +
66 + // Serial.println(tem_1);
67 + strcat(data,"tem=");
68 + strcat(data,tem_1);
69 + strcat(data,"&hum=");
70 + strcat(data,hum_1);
71 + strcpy((char *)datasend,data);
72 +
73 + //Serial.println((char *)datasend);
74 + //Serial.println(sizeof datasend);
75 +
76 +}
77 +
78 +
79 +void SendData()
80 +{
81 + LoRa.beginPacket();
82 + LoRa.print((char *)datasend);
83 + LoRa.endPacket();
84 + Serial.println("Packet Sent");
85 +}
86 +
87 +
88 +
89 +void loop()
90 +{
91 + new_time=millis();
92 + if (new_time - old_time >= 30000 || old_time == 0)
93 + {
94 + old_time = new_time;
95 + Serial.print("########### ");
96 + Serial.print("COUNT=");
97 + Serial.print(count);
98 + Serial.println(" ###########");
99 + count++;
100 + dhtTem();
101 + dhtWrite();
102 + SendData();
103 + LoRa.receive();
104 + }
105 +}
106 +
107 +void onReceive(int packetSize) {
108 +
109 + // received a packet
110 + Serial.print("Received packet : ");
111 +
112 + // read packet
113 + for (int i = 0; i < packetSize; i++) {
114 + Serial.print((char)LoRa.read());
115 + }
116 + Serial.print("\n\r");
117 +}
118 +
LoRa_send_trial.ino
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +3.4 KB
Content
... ... @@ -1,0 +1,124 @@
1 +#include "LoRaWan_APP.h"
2 +#include "Arduino.h"
3 +
4 +
5 +#define RF_FREQUENCY 868100000 // Hz
6 +
7 +#define TX_OUTPUT_POWER 5 // dBm
8 +
9 +#define LORA_BANDWIDTH 0 // [0: 125 kHz,
10 + // 1: 250 kHz,
11 + // 2: 500 kHz,
12 + // 3: Reserved]
13 +#define LORA_SPREADING_FACTOR 12 // [SF7..SF12]
14 +#define LORA_CODINGRATE 1 // [1: 4/5,
15 + // 2: 4/6,
16 + // 3: 4/7,
17 + // 4: 4/8]
18 +#define LORA_PREAMBLE_LENGTH 8 // Same for Tx and Rx
19 +#define LORA_SYMBOL_TIMEOUT 0 // Symbols
20 +#define LORA_FIX_LENGTH_PAYLOAD_ON false
21 +#define LORA_IQ_INVERSION_ON false
22 +
23 +
24 +#define RX_TIMEOUT_VALUE 1000
25 +#define BUFFER_SIZE 30 // Define the payload size here
26 +
27 +float tem,hum;
28 +char tem_1[8]={"\0"},hum_1[8]={"\0"};
29 +char *node_id = "<GW01>"; //From LG01 via web Local Channel settings on MQTT.Please refer <> dataformat in here.
30 +
31 +char txpacket[BUFFER_SIZE];
32 +char rxpacket[BUFFER_SIZE];
33 +
34 +double txNumber;
35 +
36 +bool lora_idle=true;
37 +
38 +static RadioEvents_t RadioEvents;
39 +void OnTxDone( void );
40 +void OnTxTimeout( void );
41 +
42 +void dhtTem()
43 +{
44 + tem = random(15,40);
45 + hum = random(40,80);
46 + Serial.println(F("The temperature and humidity:"));
47 + Serial.print("[");
48 + Serial.print(tem);
49 + Serial.print("℃");
50 + Serial.print(",");
51 + Serial.print(hum);
52 + Serial.print("%");
53 + Serial.print("]");
54 + Serial.println("");
55 +}
56 +
57 +void dhtWrite()
58 +{
59 + char data[50] = "\0";
60 + for(int i = 0; i < 50; i++)
61 + {
62 + data[i] = node_id[i];
63 + }
64 +
65 + dtostrf(tem,0,1,tem_1);
66 + dtostrf(hum,0,1,hum_1);
67 +
68 + strcat(data,"tem_a=");
69 + strcat(data,tem_1);
70 + strcat(data,"&hum_a=");
71 + strcat(data,hum_1);
72 + strcpy((char *)txpacket,data);
73 +
74 + Serial.println((char *)txpacket);
75 +}
76 +
77 +void setup() {
78 + Serial.begin(115200);
79 + Mcu.begin();
80 +
81 + txNumber=0;
82 +
83 + RadioEvents.TxDone = OnTxDone;
84 + RadioEvents.TxTimeout = OnTxTimeout;
85 +
86 + Radio.Init( &RadioEvents );
87 + Radio.SetChannel( RF_FREQUENCY );
88 + Radio.SetTxConfig( MODEM_LORA, TX_OUTPUT_POWER, 0, LORA_BANDWIDTH,
89 + LORA_SPREADING_FACTOR, LORA_CODINGRATE,
90 + LORA_PREAMBLE_LENGTH, LORA_FIX_LENGTH_PAYLOAD_ON,
91 + true, 0, 0, LORA_IQ_INVERSION_ON, 3000 );
92 + }
93 +
94 +
95 +
96 +void loop()
97 +{
98 + if(lora_idle == true)
99 + {
100 + delay(5000);
101 + txNumber += 0.01;
102 + Serial.println(txNumber);
103 +
104 + dhtTem();
105 + dhtWrite();
106 + Radio.Send( (uint8_t *)txpacket, strlen(txpacket) ); //send the package out
107 + lora_idle = false;
108 + }
109 + Radio.IrqProcess( );
110 +}
111 +
112 +void OnTxDone( void )
113 +{
114 + Serial.println("TX done......");
115 + lora_idle = true;
116 +}
117 +
118 +void OnTxTimeout( void )
119 +{
120 + Radio.Sleep( );
121 + Serial.println("TX Timeout......");
122 + lora_idle = true;
123 +}
124 +
Log-Temperature-Sensor-and-send-data-to-Node-red.ino
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 KB
Content
... ... @@ -1,0 +1,150 @@
1 +#include <SoftwareSerial.h>
2 +#include <Adafruit_Sensor.h>
3 +#include <DHT.h>
4 +#include <DHT_U.h>
5 +/*
6 +
7 +*/
8 +#define DHTPIN 8 // Digital pin connected to the DHT sensor
9 +#define DHTTYPE DHT11 // DHT 11
10 +DHT_Unified dht(DHTPIN, DHTTYPE);
11 +
12 +String inputString = ""; // a String to hold incoming data
13 +bool stringComplete = false; // whether the string is complete
14 +
15 +long old_time=millis();
16 +long new_time;
17 +
18 +long uplink_interval=30000; //ms
19 +
20 +float DHT11_temp;
21 +float DHT11_hum;
22 +
23 +SoftwareSerial ss(10, 11); // Arduino RX, TX ,
24 +
25 +char rxbuff[128];
26 +uint8_t rxbuff_index=0;
27 +
28 +void setup() {
29 + // initialize serial
30 + Serial.begin(9600);
31 +
32 + ss.begin(9600);
33 + ss.listen();
34 +
35 + // reserve 200 bytes for the inputString:
36 + inputString.reserve(200);
37 +
38 + dht.begin();
39 + sensor_t sensor;
40 + dht.temperature().getSensor(&sensor);
41 + dht.humidity().getSensor(&sensor);
42 +
43 + ss.println("ATZ");//reset LA66
44 +}
45 +
46 +void loop() {
47 +
48 + while ( ss.available()) {
49 + // get the new byte:
50 + char inChar = (char) ss.read();
51 + // add it to the inputString:
52 + inputString += inChar;
53 +
54 + rxbuff[rxbuff_index++]=inChar;
55 +
56 + if(rxbuff_index>128)
57 + {
58 + rxbuff[rxbuff_index]='\0';
59 + rxbuff_index=0;
60 + break;
61 + }
62 +
63 + // if the incoming character is a newline, set a flag so the main loop can
64 + // do something about it:
65 + if (inChar == '\n' || inChar == '\r') {
66 + stringComplete = true;
67 + rxbuff[rxbuff_index]='\0';
68 + rxbuff_index=0;
69 + }
70 + }
71 +
72 + while ( Serial.available()) {
73 + // get the new byte:
74 + char inChar = (char) Serial.read();
75 + // add it to the inputString:
76 + inputString += inChar;
77 + // if the incoming character is a newline, set a flag so the main loop can
78 + // do something about it:
79 + if (inChar == '\n' || inChar == '\r') {
80 + ss.print(inputString);
81 + inputString = "\0";
82 + }
83 + }
84 +
85 + // print the string when a newline arrives:
86 + if (stringComplete) {
87 + Serial.print(inputString);
88 +
89 + // clear the string:
90 + inputString = "\0";
91 + stringComplete = false;
92 + }
93 +
94 + new_time = millis();
95 +
96 + if(new_time-old_time>=uplink_interval){
97 + old_time = new_time;
98 +
99 + Serial.print(F("\r\n"));
100 + // Get temperature event and print its value.
101 + sensors_event_t event;
102 + dht.temperature().getEvent(&event);
103 + if (isnan(event.temperature)) {
104 + Serial.println(F("Error reading temperature!"));
105 + DHT11_temp=327.67;
106 + }
107 + else {
108 + DHT11_temp=event.temperature;
109 +
110 + if(DHT11_temp>60){
111 + DHT11_temp=60;
112 + }
113 + else if(DHT11_temp<-20){
114 + DHT11_temp=-20;
115 + }
116 + }
117 + // Get humidity event and print its value.
118 + dht.humidity().getEvent(&event);
119 + if (isnan(event.relative_humidity)) {
120 + DHT11_hum=327.67;
121 + Serial.println(F("Error reading humidity!"));
122 + }
123 + else {
124 + DHT11_hum=event.relative_humidity;
125 +
126 + if(DHT11_hum>100){
127 + DHT11_hum=100;
128 + }
129 + else if(DHT11_hum<0){
130 + DHT11_hum=0;
131 + }
132 + }
133 +
134 + Serial.print(F("Temperature: "));
135 + Serial.print(DHT11_temp);
136 + Serial.println(F("°C"));
137 + Serial.print(F("Humidity: "));
138 + Serial.print(DHT11_hum);
139 + Serial.println(F("%"));
140 + Serial.print(F("\r\n"));
141 +
142 + char sensor_data_buff[128]="\0";
143 +
144 + //confirm status,Fport,payload length,payload(HEX)
145 + snprintf(sensor_data_buff,128,"AT+SEND=0,%02X%02X%02X%02X,0,0",(short)(DHT11_temp*100)>>8 & 0xFF,(short)(DHT11_temp*100) & 0xFF,(short)(DHT11_hum*10)>>8 & 0xFF,(short)(DHT11_hum*10) & 0xFF);
146 + ss.print(sensor_data_buff);
147 + ss.print('\r');
148 + }
149 +}
150 +
Log-Temperature-Sensor-and-send-data-to-Node-red.json
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.3 KB
Content
... ... @@ -1,0 +1,443 @@
1 +[
2 + {
3 + "id": "0a211e08511c4bdd",
4 + "type": "tab",
5 + "label": "serial USB",
6 + "disabled": false,
7 + "info": "",
8 + "env": []
9 + },
10 + {
11 + "id": "4a97eeb54bf57a6d",
12 + "type": "serial in",
13 + "z": "0a211e08511c4bdd",
14 + "name": "",
15 + "serial": "bb1c0e81fd51fa9e",
16 + "x": 210,
17 + "y": 60,
18 + "wires": [
19 + [
20 + "d2493fb9752dbcab",
21 + "d183c255973c979e"
22 + ]
23 + ]
24 + },
25 + {
26 + "id": "12f1eeb8049675c1",
27 + "type": "inject",
28 + "z": "0a211e08511c4bdd",
29 + "name": "AT+SEND=1,hello world,0,3",
30 + "props": [
31 + {
32 + "p": "payload"
33 + }
34 + ],
35 + "repeat": "",
36 + "crontab": "",
37 + "once": false,
38 + "onceDelay": 0.1,
39 + "topic": "",
40 + "payload": "AT+SEND=1,hello world,0,3",
41 + "payloadType": "str",
42 + "x": 220,
43 + "y": 260,
44 + "wires": [
45 + [
46 + "a5d2f5df63a2148e"
47 + ]
48 + ]
49 + },
50 + {
51 + "id": "a5d2f5df63a2148e",
52 + "type": "serial out",
53 + "z": "0a211e08511c4bdd",
54 + "name": "",
55 + "serial": "bb1c0e81fd51fa9e",
56 + "x": 540,
57 + "y": 260,
58 + "wires": []
59 + },
60 + {
61 + "id": "dc04c04a0bc0e5db",
62 + "type": "inject",
63 + "z": "0a211e08511c4bdd",
64 + "name": "",
65 + "props": [
66 + {
67 + "p": "payload"
68 + }
69 + ],
70 + "repeat": "",
71 + "crontab": "",
72 + "once": false,
73 + "onceDelay": 0.1,
74 + "topic": "",
75 + "payload": "ATZ",
76 + "payloadType": "str",
77 + "x": 290,
78 + "y": 320,
79 + "wires": [
80 + [
81 + "a5d2f5df63a2148e"
82 + ]
83 + ]
84 + },
85 + {
86 + "id": "3de96a220e28e8f0",
87 + "type": "inject",
88 + "z": "0a211e08511c4bdd",
89 + "name": "AT+FRE",
90 + "props": [
91 + {
92 + "p": "payload"
93 + }
94 + ],
95 + "repeat": "",
96 + "crontab": "",
97 + "once": false,
98 + "onceDelay": 0.1,
99 + "topic": "",
100 + "payload": "AT+FRE=868.100,868.100",
101 + "payloadType": "str",
102 + "x": 280,
103 + "y": 380,
104 + "wires": [
105 + [
106 + "a5d2f5df63a2148e"
107 + ]
108 + ]
109 + },
110 + {
111 + "id": "638725a47a1e4365",
112 + "type": "inject",
113 + "z": "0a211e08511c4bdd",
114 + "name": "AT+BW",
115 + "props": [
116 + {
117 + "p": "payload"
118 + }
119 + ],
120 + "repeat": "",
121 + "crontab": "",
122 + "once": false,
123 + "onceDelay": 0.1,
124 + "topic": "",
125 + "payload": "AT+BW=0,0",
126 + "payloadType": "str",
127 + "x": 290,
128 + "y": 440,
129 + "wires": [
130 + [
131 + "a5d2f5df63a2148e"
132 + ]
133 + ]
134 + },
135 + {
136 + "id": "85ba9868d1f3e82c",
137 + "type": "inject",
138 + "z": "0a211e08511c4bdd",
139 + "name": "AT+SF",
140 + "props": [
141 + {
142 + "p": "payload"
143 + }
144 + ],
145 + "repeat": "",
146 + "crontab": "",
147 + "once": false,
148 + "onceDelay": 0.1,
149 + "topic": "",
150 + "payload": "AT+SF=12,12",
151 + "payloadType": "str",
152 + "x": 290,
153 + "y": 500,
154 + "wires": [
155 + [
156 + "a5d2f5df63a2148e"
157 + ]
158 + ]
159 + },
160 + {
161 + "id": "144b2749013ffe57",
162 + "type": "inject",
163 + "z": "0a211e08511c4bdd",
164 + "name": "AT+RXMOD",
165 + "props": [
166 + {
167 + "p": "payload"
168 + }
169 + ],
170 + "repeat": "",
171 + "crontab": "",
172 + "once": false,
173 + "onceDelay": 0.1,
174 + "topic": "",
175 + "payload": "AT+RXMOD=65535,2",
176 + "payloadType": "str",
177 + "x": 270,
178 + "y": 560,
179 + "wires": [
180 + [
181 + "a5d2f5df63a2148e"
182 + ]
183 + ]
184 + },
185 + {
186 + "id": "bfb2e9df89dc5e2f",
187 + "type": "inject",
188 + "z": "0a211e08511c4bdd",
189 + "name": "AT+SYNCWORD",
190 + "props": [
191 + {
192 + "p": "payload"
193 + }
194 + ],
195 + "repeat": "",
196 + "crontab": "",
197 + "once": false,
198 + "onceDelay": 0.1,
199 + "topic": "",
200 + "payload": "AT+SYNCWORD=0",
201 + "payloadType": "str",
202 + "x": 260,
203 + "y": 620,
204 + "wires": [
205 + [
206 + "a5d2f5df63a2148e"
207 + ]
208 + ]
209 + },
210 + {
211 + "id": "d2493fb9752dbcab",
212 + "type": "function",
213 + "z": "0a211e08511c4bdd",
214 + "name": "function 1",
215 + "func": "var data = msg.payload\nif (data.substring(0, 4) == \"Data\") {\n if (data.substring(6, 12) == \"(HEX:)\") {\n var temp = data.substring(13, 15) + data.substring(16, 18)\n var hum = data.substring(19, 21) + data.substring(22, 24)\n var temp1 = parseInt(temp, 16) / 100\n var hum1 = parseInt(hum, 16) / 10\n var a1 = { payload: temp1 }, a2 = { payload: hum1 }\n }\n if (data.substring(6, 15) == \"(String:)\") {\n var temp = data.substring(20, 24)\n var hum = data.substring(29, 34)\n a1 = { payload: temp }, a2 = { payload: hum }\n }\n}\nif (data.substring(0, 4) == \"Rssi\") {\n var rssi = data.substring(6)\n var a3 = { payload: rssi }\n}\nreturn [a1, a2, a3];",
216 + "outputs": 3,
217 + "noerr": 0,
218 + "initialize": "",
219 + "finalize": "",
220 + "libs": [],
221 + "x": 420,
222 + "y": 60,
223 + "wires": [
224 + [
225 + "c17d94be4317ae6c"
226 + ],
227 + [
228 + "20c5b1c7f42fa6bb"
229 + ],
230 + [
231 + "39a8462f3d748eef"
232 + ]
233 + ]
234 + },
235 + {
236 + "id": "39a8462f3d748eef",
237 + "type": "ui_chart",
238 + "z": "0a211e08511c4bdd",
239 + "name": "",
240 + "group": "ef41b39771110fa5",
241 + "order": 1,
242 + "width": 0,
243 + "height": 0,
244 + "label": "RSSI",
245 + "chartType": "line",
246 + "legend": "false",
247 + "xformat": "dd HH:mm",
248 + "interpolate": "linear",
249 + "nodata": "",
250 + "dot": true,
251 + "ymin": "",
252 + "ymax": "",
253 + "removeOlder": 1,
254 + "removeOlderPoints": "",
255 + "removeOlderUnit": "3600",
256 + "cutout": 0,
257 + "useOneColor": false,
258 + "useUTC": false,
259 + "colors": [
260 + "#1f77b4",
261 + "#aec7e8",
262 + "#ff7f0e",
263 + "#2ca02c",
264 + "#98df8a",
265 + "#d62728",
266 + "#ff9896",
267 + "#9467bd",
268 + "#c5b0d5"
269 + ],
270 + "outputs": 1,
271 + "useDifferentColor": false,
272 + "className": "",
273 + "x": 670,
274 + "y": 180,
275 + "wires": [
276 + []
277 + ]
278 + },
279 + {
280 + "id": "c17d94be4317ae6c",
281 + "type": "ui_chart",
282 + "z": "0a211e08511c4bdd",
283 + "name": "",
284 + "group": "7e1d1c102cf74e6b",
285 + "order": 1,
286 + "width": 0,
287 + "height": 0,
288 + "label": "Temperature",
289 + "chartType": "line",
290 + "legend": "false",
291 + "xformat": "HH:mm:ss",
292 + "interpolate": "linear",
293 + "nodata": "",
294 + "dot": true,
295 + "ymin": "",
296 + "ymax": "",
297 + "removeOlder": 1,
298 + "removeOlderPoints": "",
299 + "removeOlderUnit": "3600",
300 + "cutout": 0,
301 + "useOneColor": false,
302 + "useUTC": false,
303 + "colors": [
304 + "#1f77b4",
305 + "#aec7e8",
306 + "#ff7f0e",
307 + "#2ca02c",
308 + "#98df8a",
309 + "#d62728",
310 + "#ff9896",
311 + "#9467bd",
312 + "#c5b0d5"
313 + ],
314 + "outputs": 1,
315 + "useDifferentColor": false,
316 + "className": "",
317 + "x": 690,
318 + "y": 100,
319 + "wires": [
320 + []
321 + ]
322 + },
323 + {
324 + "id": "20c5b1c7f42fa6bb",
325 + "type": "ui_chart",
326 + "z": "0a211e08511c4bdd",
327 + "name": "",
328 + "group": "3f5d139f158d7c1c",
329 + "order": 2,
330 + "width": 0,
331 + "height": 0,
332 + "label": "Humidity",
333 + "chartType": "line",
334 + "legend": "false",
335 + "xformat": "HH:mm:ss",
336 + "interpolate": "linear",
337 + "nodata": "",
338 + "dot": true,
339 + "ymin": "",
340 + "ymax": "",
341 + "removeOlder": 1,
342 + "removeOlderPoints": "",
343 + "removeOlderUnit": "3600",
344 + "cutout": 0,
345 + "useOneColor": false,
346 + "useUTC": false,
347 + "colors": [
348 + "#1f77b4",
349 + "#aec7e8",
350 + "#ff7f0e",
351 + "#2ca02c",
352 + "#98df8a",
353 + "#d62728",
354 + "#ff9896",
355 + "#9467bd",
356 + "#c5b0d5"
357 + ],
358 + "outputs": 1,
359 + "useDifferentColor": false,
360 + "className": "",
361 + "x": 680,
362 + "y": 140,
363 + "wires": [
364 + []
365 + ]
366 + },
367 + {
368 + "id": "d183c255973c979e",
369 + "type": "debug",
370 + "z": "0a211e08511c4bdd",
371 + "name": "debug 1",
372 + "active": true,
373 + "tosidebar": true,
374 + "console": false,
375 + "tostatus": false,
376 + "complete": "false",
377 + "statusVal": "",
378 + "statusType": "auto",
379 + "x": 420,
380 + "y": 180,
381 + "wires": []
382 + },
383 + {
384 + "id": "bb1c0e81fd51fa9e",
385 + "type": "serial-port",
386 + "serialport": "/dev/ttyUSB0",
387 + "serialbaud": "9600",
388 + "databits": "8",
389 + "parity": "none",
390 + "stopbits": "1",
391 + "waitfor": "",
392 + "dtr": "none",
393 + "rts": "none",
394 + "cts": "none",
395 + "dsr": "none",
396 + "newline": "\\n",
397 + "bin": "false",
398 + "out": "char",
399 + "addchar": "\\r\\n",
400 + "responsetimeout": "10000"
401 + },
402 + {
403 + "id": "ef41b39771110fa5",
404 + "type": "ui_group",
405 + "name": "rssi",
406 + "tab": "abb98f80600a5448",
407 + "order": 3,
408 + "disp": true,
409 + "width": "6",
410 + "collapse": false,
411 + "className": ""
412 + },
413 + {
414 + "id": "7e1d1c102cf74e6b",
415 + "type": "ui_group",
416 + "name": "TEM",
417 + "tab": "abb98f80600a5448",
418 + "order": 4,
419 + "disp": true,
420 + "width": "6",
421 + "collapse": false,
422 + "className": ""
423 + },
424 + {
425 + "id": "3f5d139f158d7c1c",
426 + "type": "ui_group",
427 + "name": "HUM",
428 + "tab": "abb98f80600a5448",
429 + "order": 2,
430 + "disp": true,
431 + "width": "6",
432 + "collapse": false,
433 + "className": ""
434 + },
435 + {
436 + "id": "abb98f80600a5448",
437 + "type": "ui_tab",
438 + "name": "LG01v2",
439 + "icon": "LG01v2",
440 + "disabled": false,
441 + "hidden": false
442 + }
443 +]
Log-Temperature-Sensor-and-send-data-to-node-red.json
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
... ... @@ -1,0 +1,443 @@
1 +[
2 + {
3 + "id": "5f10779accc05655",
4 + "type": "tab",
5 + "label": "serial USB",
6 + "disabled": false,
7 + "info": "",
8 + "env": []
9 + },
10 + {
11 + "id": "4ea60ce4df40717c",
12 + "type": "serial in",
13 + "z": "5f10779accc05655",
14 + "name": "",
15 + "serial": "bb1c0e81fd51fa9e",
16 + "x": 210,
17 + "y": 60,
18 + "wires": [
19 + [
20 + "40eac96a52733f7a",
21 + "79722a224bb22c96"
22 + ]
23 + ]
24 + },
25 + {
26 + "id": "fe5a93a52b6adcf1",
27 + "type": "inject",
28 + "z": "5f10779accc05655",
29 + "name": "AT+SEND=1,hello world,0,3",
30 + "props": [
31 + {
32 + "p": "payload"
33 + }
34 + ],
35 + "repeat": "",
36 + "crontab": "",
37 + "once": false,
38 + "onceDelay": 0.1,
39 + "topic": "",
40 + "payload": "AT+SEND=1,hello world,0,3",
41 + "payloadType": "str",
42 + "x": 220,
43 + "y": 260,
44 + "wires": [
45 + [
46 + "3f8add7e2e1d1d17"
47 + ]
48 + ]
49 + },
50 + {
51 + "id": "3f8add7e2e1d1d17",
52 + "type": "serial out",
53 + "z": "5f10779accc05655",
54 + "name": "",
55 + "serial": "bb1c0e81fd51fa9e",
56 + "x": 540,
57 + "y": 260,
58 + "wires": []
59 + },
60 + {
61 + "id": "16e7d3d83d9e9415",
62 + "type": "inject",
63 + "z": "5f10779accc05655",
64 + "name": "",
65 + "props": [
66 + {
67 + "p": "payload"
68 + }
69 + ],
70 + "repeat": "",
71 + "crontab": "",
72 + "once": false,
73 + "onceDelay": 0.1,
74 + "topic": "",
75 + "payload": "ATZ",
76 + "payloadType": "str",
77 + "x": 290,
78 + "y": 320,
79 + "wires": [
80 + [
81 + "3f8add7e2e1d1d17"
82 + ]
83 + ]
84 + },
85 + {
86 + "id": "09ea381519629dae",
87 + "type": "inject",
88 + "z": "5f10779accc05655",
89 + "name": "AT+FRE",
90 + "props": [
91 + {
92 + "p": "payload"
93 + }
94 + ],
95 + "repeat": "",
96 + "crontab": "",
97 + "once": false,
98 + "onceDelay": 0.1,
99 + "topic": "",
100 + "payload": "AT+FRE=868.100,868.100",
101 + "payloadType": "str",
102 + "x": 280,
103 + "y": 380,
104 + "wires": [
105 + [
106 + "3f8add7e2e1d1d17"
107 + ]
108 + ]
109 + },
110 + {
111 + "id": "5167a7f904013ffd",
112 + "type": "inject",
113 + "z": "5f10779accc05655",
114 + "name": "AT+BW",
115 + "props": [
116 + {
117 + "p": "payload"
118 + }
119 + ],
120 + "repeat": "",
121 + "crontab": "",
122 + "once": false,
123 + "onceDelay": 0.1,
124 + "topic": "",
125 + "payload": "AT+BW=0,0",
126 + "payloadType": "str",
127 + "x": 290,
128 + "y": 440,
129 + "wires": [
130 + [
131 + "3f8add7e2e1d1d17"
132 + ]
133 + ]
134 + },
135 + {
136 + "id": "dbe4abbc730c76e6",
137 + "type": "inject",
138 + "z": "5f10779accc05655",
139 + "name": "AT+SF",
140 + "props": [
141 + {
142 + "p": "payload"
143 + }
144 + ],
145 + "repeat": "",
146 + "crontab": "",
147 + "once": false,
148 + "onceDelay": 0.1,
149 + "topic": "",
150 + "payload": "AT+SF=12,12",
151 + "payloadType": "str",
152 + "x": 290,
153 + "y": 500,
154 + "wires": [
155 + [
156 + "3f8add7e2e1d1d17"
157 + ]
158 + ]
159 + },
160 + {
161 + "id": "3be3ab296a75d512",
162 + "type": "inject",
163 + "z": "5f10779accc05655",
164 + "name": "AT+RXMOD",
165 + "props": [
166 + {
167 + "p": "payload"
168 + }
169 + ],
170 + "repeat": "",
171 + "crontab": "",
172 + "once": false,
173 + "onceDelay": 0.1,
174 + "topic": "",
175 + "payload": "AT+RXMOD=65535,2",
176 + "payloadType": "str",
177 + "x": 270,
178 + "y": 560,
179 + "wires": [
180 + [
181 + "3f8add7e2e1d1d17"
182 + ]
183 + ]
184 + },
185 + {
186 + "id": "7a03d1413c60ea1c",
187 + "type": "inject",
188 + "z": "5f10779accc05655",
189 + "name": "AT+SYNCWORD",
190 + "props": [
191 + {
192 + "p": "payload"
193 + }
194 + ],
195 + "repeat": "",
196 + "crontab": "",
197 + "once": false,
198 + "onceDelay": 0.1,
199 + "topic": "",
200 + "payload": "AT+SYNCWORD=0",
201 + "payloadType": "str",
202 + "x": 260,
203 + "y": 620,
204 + "wires": [
205 + [
206 + "3f8add7e2e1d1d17"
207 + ]
208 + ]
209 + },
210 + {
211 + "id": "40eac96a52733f7a",
212 + "type": "function",
213 + "z": "5f10779accc05655",
214 + "name": "function 1",
215 + "func": "var data = msg.payload\nif (data.substring(0, 4) == \"Data\")\n{\n if (data.substring(6, 12) == \"(HEX:)\")\n {\n var temp = data.substring(13, 15) + data.substring(16, 18)\n var hum = data.substring(19, 21) + data.substring(22, 24)\n var temp1 = parseInt(temp, 16)/100\n var hum1 = parseInt(hum, 16)/10\n var a1 = { payload: temp1 }, a2 = { payload: hum1 }\n }\n}\nif (data.substring(0, 4) == \"Rssi\")\n{\n var rssi = data.substring(6)\n var a3 = { payload: rssi }\n}\nreturn [a1,a2,a3];\n \n\n",
216 + "outputs": 3,
217 + "noerr": 0,
218 + "initialize": "",
219 + "finalize": "",
220 + "libs": [],
221 + "x": 420,
222 + "y": 60,
223 + "wires": [
224 + [
225 + "81edb003937f1a92"
226 + ],
227 + [
228 + "c63593404a60d9dc"
229 + ],
230 + [
231 + "61ca71032888887b"
232 + ]
233 + ]
234 + },
235 + {
236 + "id": "61ca71032888887b",
237 + "type": "ui_chart",
238 + "z": "5f10779accc05655",
239 + "name": "",
240 + "group": "ef41b39771110fa5",
241 + "order": 1,
242 + "width": 0,
243 + "height": 0,
244 + "label": "RSSI",
245 + "chartType": "line",
246 + "legend": "false",
247 + "xformat": "dd HH:mm",
248 + "interpolate": "linear",
249 + "nodata": "",
250 + "dot": true,
251 + "ymin": "",
252 + "ymax": "",
253 + "removeOlder": 1,
254 + "removeOlderPoints": "",
255 + "removeOlderUnit": "3600",
256 + "cutout": 0,
257 + "useOneColor": false,
258 + "useUTC": false,
259 + "colors": [
260 + "#1f77b4",
261 + "#aec7e8",
262 + "#ff7f0e",
263 + "#2ca02c",
264 + "#98df8a",
265 + "#d62728",
266 + "#ff9896",
267 + "#9467bd",
268 + "#c5b0d5"
269 + ],
270 + "outputs": 1,
271 + "useDifferentColor": false,
272 + "className": "",
273 + "x": 670,
274 + "y": 180,
275 + "wires": [
276 + []
277 + ]
278 + },
279 + {
280 + "id": "81edb003937f1a92",
281 + "type": "ui_chart",
282 + "z": "5f10779accc05655",
283 + "name": "",
284 + "group": "7e1d1c102cf74e6b",
285 + "order": 1,
286 + "width": 0,
287 + "height": 0,
288 + "label": "Temperature",
289 + "chartType": "line",
290 + "legend": "false",
291 + "xformat": "HH:mm:ss",
292 + "interpolate": "linear",
293 + "nodata": "",
294 + "dot": true,
295 + "ymin": "",
296 + "ymax": "",
297 + "removeOlder": 1,
298 + "removeOlderPoints": "",
299 + "removeOlderUnit": "3600",
300 + "cutout": 0,
301 + "useOneColor": false,
302 + "useUTC": false,
303 + "colors": [
304 + "#1f77b4",
305 + "#aec7e8",
306 + "#ff7f0e",
307 + "#2ca02c",
308 + "#98df8a",
309 + "#d62728",
310 + "#ff9896",
311 + "#9467bd",
312 + "#c5b0d5"
313 + ],
314 + "outputs": 1,
315 + "useDifferentColor": false,
316 + "className": "",
317 + "x": 690,
318 + "y": 100,
319 + "wires": [
320 + []
321 + ]
322 + },
323 + {
324 + "id": "c63593404a60d9dc",
325 + "type": "ui_chart",
326 + "z": "5f10779accc05655",
327 + "name": "",
328 + "group": "3f5d139f158d7c1c",
329 + "order": 2,
330 + "width": 0,
331 + "height": 0,
332 + "label": "Humidity",
333 + "chartType": "line",
334 + "legend": "false",
335 + "xformat": "HH:mm:ss",
336 + "interpolate": "linear",
337 + "nodata": "",
338 + "dot": true,
339 + "ymin": "",
340 + "ymax": "",
341 + "removeOlder": 1,
342 + "removeOlderPoints": "",
343 + "removeOlderUnit": "3600",
344 + "cutout": 0,
345 + "useOneColor": false,
346 + "useUTC": false,
347 + "colors": [
348 + "#1f77b4",
349 + "#aec7e8",
350 + "#ff7f0e",
351 + "#2ca02c",
352 + "#98df8a",
353 + "#d62728",
354 + "#ff9896",
355 + "#9467bd",
356 + "#c5b0d5"
357 + ],
358 + "outputs": 1,
359 + "useDifferentColor": false,
360 + "className": "",
361 + "x": 680,
362 + "y": 140,
363 + "wires": [
364 + []
365 + ]
366 + },
367 + {
368 + "id": "79722a224bb22c96",
369 + "type": "debug",
370 + "z": "5f10779accc05655",
371 + "name": "debug 1",
372 + "active": true,
373 + "tosidebar": true,
374 + "console": false,
375 + "tostatus": false,
376 + "complete": "false",
377 + "statusVal": "",
378 + "statusType": "auto",
379 + "x": 420,
380 + "y": 180,
381 + "wires": []
382 + },
383 + {
384 + "id": "bb1c0e81fd51fa9e",
385 + "type": "serial-port",
386 + "serialport": "/dev/ttyUSB0",
387 + "serialbaud": "9600",
388 + "databits": "8",
389 + "parity": "none",
390 + "stopbits": "1",
391 + "waitfor": "",
392 + "dtr": "none",
393 + "rts": "none",
394 + "cts": "none",
395 + "dsr": "none",
396 + "newline": "\\n",
397 + "bin": "false",
398 + "out": "char",
399 + "addchar": "\\r\\n",
400 + "responsetimeout": "10000"
401 + },
402 + {
403 + "id": "ef41b39771110fa5",
404 + "type": "ui_group",
405 + "name": "rssi",
406 + "tab": "abb98f80600a5448",
407 + "order": 3,
408 + "disp": true,
409 + "width": "6",
410 + "collapse": false,
411 + "className": ""
412 + },
413 + {
414 + "id": "7e1d1c102cf74e6b",
415 + "type": "ui_group",
416 + "name": "TEM",
417 + "tab": "abb98f80600a5448",
418 + "order": 4,
419 + "disp": true,
420 + "width": "6",
421 + "collapse": false,
422 + "className": ""
423 + },
424 + {
425 + "id": "3f5d139f158d7c1c",
426 + "type": "ui_group",
427 + "name": "HUM",
428 + "tab": "abb98f80600a5448",
429 + "order": 2,
430 + "disp": true,
431 + "width": "6",
432 + "collapse": false,
433 + "className": ""
434 + },
435 + {
436 + "id": "abb98f80600a5448",
437 + "type": "ui_tab",
438 + "name": "LG01v2",
439 + "icon": "LG01v2",
440 + "disabled": false,
441 + "hidden": false
442 + }
443 +]
arduino-LoRa-master.zip
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.6 KB
Content
image-20221101160705-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +6.1 KB
Content
image-20221101161318-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +46.3 KB
Content
image-20221101161951-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +131.0 KB
Content
image-20221101162527-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +290.1 KB
Content
image-20221102105419-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.3 KB
Content
image-20221102110604-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.9 KB
Content
image-20221102114002-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +50.1 KB
Content
image-20221102140053-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20221103140645-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +39.1 KB
Content
image-20221103142228-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.7 KB
Content
image-20221103142416-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +325.9 KB
Content
image-20221103143528-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.2 KB
Content
image-20221103143618-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20221103144405-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +32.8 KB
Content
image-20221103152033-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.3 KB
Content
image-20221103152238-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +32.8 KB
Content
image-20221104100344-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +137.0 KB
Content
image-20221104100520-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +140.7 KB
Content
image-20221104102736-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +325.9 KB
Content
image-20221104155612-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +384.2 KB
Content
image-20221104155654-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20221104155724-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +42.4 KB
Content
image-20221104155907-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +66.7 KB
Content
image-20221104155928-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.5 KB
Content
image-20221104155949-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +46.0 KB
Content
image-20221108164337-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20221108164413-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +27.1 KB
Content
image-20221108170314-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.6 KB
Content
image-20221108170621-4.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +544.6 KB
Content
image-20221108170731-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +2.5 MB
Content
image-20221108172149-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20221108172432-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +45.9 KB
Content
image-20221108174840-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.1 KB
Content
image-20221108175113-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +72.6 KB
Content
image-20221108180334-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +159.3 KB
Content
image-20221108180458-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.4 KB
Content
image-20221112161031-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.1 KB
Content
image-20221112161111-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20221112162733-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +78.7 KB
Content
image-20221112163119-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +32.6 KB
Content
image-20230504095457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +412.6 KB
Content
image-20230504095502-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +412.6 KB
Content
serial USB.json
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 KB
Content
... ... @@ -1,0 +1,244 @@
1 +[
2 + {
3 + "id": "5f10779accc05655",
4 + "type": "tab",
5 + "label": "serial USB",
6 + "disabled": false,
7 + "info": "",
8 + "env": []
9 + },
10 + {
11 + "id": "4ea60ce4df40717c",
12 + "type": "serial in",
13 + "z": "5f10779accc05655",
14 + "name": "",
15 + "serial": "bb1c0e81fd51fa9e",
16 + "x": 230,
17 + "y": 60,
18 + "wires": [
19 + [
20 + "a8a0db18429e7d84"
21 + ]
22 + ]
23 + },
24 + {
25 + "id": "a8a0db18429e7d84",
26 + "type": "debug",
27 + "z": "5f10779accc05655",
28 + "name": "debug 1",
29 + "active": true,
30 + "tosidebar": true,
31 + "console": false,
32 + "tostatus": false,
33 + "complete": "false",
34 + "statusVal": "",
35 + "statusType": "auto",
36 + "x": 440,
37 + "y": 60,
38 + "wires": []
39 + },
40 + {
41 + "id": "fe5a93a52b6adcf1",
42 + "type": "inject",
43 + "z": "5f10779accc05655",
44 + "name": "AT+SEND=1,hello world,0,3",
45 + "props": [
46 + {
47 + "p": "payload"
48 + }
49 + ],
50 + "repeat": "",
51 + "crontab": "",
52 + "once": false,
53 + "onceDelay": 0.1,
54 + "topic": "",
55 + "payload": "AT+SEND=1,hello world,0,3",
56 + "payloadType": "str",
57 + "x": 200,
58 + "y": 140,
59 + "wires": [
60 + [
61 + "3f8add7e2e1d1d17"
62 + ]
63 + ]
64 + },
65 + {
66 + "id": "3f8add7e2e1d1d17",
67 + "type": "serial out",
68 + "z": "5f10779accc05655",
69 + "name": "",
70 + "serial": "bb1c0e81fd51fa9e",
71 + "x": 530,
72 + "y": 140,
73 + "wires": []
74 + },
75 + {
76 + "id": "16e7d3d83d9e9415",
77 + "type": "inject",
78 + "z": "5f10779accc05655",
79 + "name": "",
80 + "props": [
81 + {
82 + "p": "payload"
83 + }
84 + ],
85 + "repeat": "",
86 + "crontab": "",
87 + "once": false,
88 + "onceDelay": 0.1,
89 + "topic": "",
90 + "payload": "ATZ",
91 + "payloadType": "str",
92 + "x": 270,
93 + "y": 200,
94 + "wires": [
95 + [
96 + "3f8add7e2e1d1d17"
97 + ]
98 + ]
99 + },
100 + {
101 + "id": "09ea381519629dae",
102 + "type": "inject",
103 + "z": "5f10779accc05655",
104 + "name": "AT+FRE",
105 + "props": [
106 + {
107 + "p": "payload"
108 + }
109 + ],
110 + "repeat": "",
111 + "crontab": "",
112 + "once": false,
113 + "onceDelay": 0.1,
114 + "topic": "",
115 + "payload": "AT+FRE=868.100,868.100",
116 + "payloadType": "str",
117 + "x": 260,
118 + "y": 260,
119 + "wires": [
120 + [
121 + "3f8add7e2e1d1d17"
122 + ]
123 + ]
124 + },
125 + {
126 + "id": "5167a7f904013ffd",
127 + "type": "inject",
128 + "z": "5f10779accc05655",
129 + "name": "AT+BW",
130 + "props": [
131 + {
132 + "p": "payload"
133 + }
134 + ],
135 + "repeat": "",
136 + "crontab": "",
137 + "once": false,
138 + "onceDelay": 0.1,
139 + "topic": "",
140 + "payload": "AT+BW=0,0",
141 + "payloadType": "str",
142 + "x": 270,
143 + "y": 320,
144 + "wires": [
145 + [
146 + "3f8add7e2e1d1d17"
147 + ]
148 + ]
149 + },
150 + {
151 + "id": "dbe4abbc730c76e6",
152 + "type": "inject",
153 + "z": "5f10779accc05655",
154 + "name": "AT+SF",
155 + "props": [
156 + {
157 + "p": "payload"
158 + }
159 + ],
160 + "repeat": "",
161 + "crontab": "",
162 + "once": false,
163 + "onceDelay": 0.1,
164 + "topic": "",
165 + "payload": "AT+SF=12,12",
166 + "payloadType": "str",
167 + "x": 270,
168 + "y": 380,
169 + "wires": [
170 + [
171 + "3f8add7e2e1d1d17"
172 + ]
173 + ]
174 + },
175 + {
176 + "id": "3be3ab296a75d512",
177 + "type": "inject",
178 + "z": "5f10779accc05655",
179 + "name": "AT+RXMOD",
180 + "props": [
181 + {
182 + "p": "payload"
183 + }
184 + ],
185 + "repeat": "",
186 + "crontab": "",
187 + "once": false,
188 + "onceDelay": 0.1,
189 + "topic": "",
190 + "payload": "AT+RXMOD=65535,0",
191 + "payloadType": "str",
192 + "x": 250,
193 + "y": 440,
194 + "wires": [
195 + [
196 + "3f8add7e2e1d1d17"
197 + ]
198 + ]
199 + },
200 + {
201 + "id": "7a03d1413c60ea1c",
202 + "type": "inject",
203 + "z": "5f10779accc05655",
204 + "name": "AT+SYNCWORD",
205 + "props": [
206 + {
207 + "p": "payload"
208 + }
209 + ],
210 + "repeat": "",
211 + "crontab": "",
212 + "once": false,
213 + "onceDelay": 0.1,
214 + "topic": "",
215 + "payload": "AT+SYNCWORD=0",
216 + "payloadType": "str",
217 + "x": 240,
218 + "y": 500,
219 + "wires": [
220 + [
221 + "3f8add7e2e1d1d17"
222 + ]
223 + ]
224 + },
225 + {
226 + "id": "bb1c0e81fd51fa9e",
227 + "type": "serial-port",
228 + "serialport": "/dev/ttyUSB0",
229 + "serialbaud": "9600",
230 + "databits": "8",
231 + "parity": "none",
232 + "stopbits": "1",
233 + "waitfor": "",
234 + "dtr": "none",
235 + "rts": "none",
236 + "cts": "none",
237 + "dsr": "none",
238 + "newline": "\\n",
239 + "bin": "false",
240 + "out": "char",
241 + "addchar": "\\n",
242 + "responsetimeout": "10000"
243 + }
244 +]

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0