Last modified by Kilight Cao on 2024/10/12 08:58
<
From version < 24.1 >
edited by Kilight Cao
on 2022/10/31 09:48
To version < 41.1 >
edited by Kilight Cao
on 2022/11/01 17:19
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -88,7 +88,7 @@
88 88  == **1.6 Button Intruction** ==
89 89  
90 90  
91 -LG01-V2 has a black toggle button, which is:
91 +LG01v2 has a black toggle button, which is:
92 92  
93 93  
94 94  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
... ... @@ -102,7 +102,7 @@
102 102  
103 103  
104 104  
105 -= ** 2. Quick Start** =
105 += **2. Quick Start** =
106 106  
107 107  
108 108  The LG01-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
... ... @@ -119,7 +119,7 @@
119 119  === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
120 120  
121 121  
122 -Connect the LG01-V2 Ethernet port to your router and LG01-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01-V2.
122 +Connect the LG01v2 Ethernet port to your router and LG01v2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01v2.
123 123  
124 124  You can also use this IP to connect.
125 125  
... ... @@ -132,7 +132,7 @@
132 132  
133 133  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100542-2.png?width=1256&height=369&rev=1.1||alt="image-20220622100542-2.png"]]
134 134  
135 -The LG01-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
135 +The LG01v2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
136 136  
137 137  
138 138  (% style="color:#037691" %)**Steps to connect via fallback IP:**
... ... @@ -217,166 +217,171 @@
217 217  
218 218  
219 219  
220 -= **4. Build-in Server** =
220 += **4. How to configure the Lora Gateway** =
221 221  
222 222  
223 -The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
223 +== **4.1 Access the Lora configuration page** ==
224 224  
225 225  
226 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820115644-1.png?width=778&height=217&rev=1.1||alt="image-20220820115644-1.png"]]
226 +Users can access the LA66 module by running the following command, then select the option **''serial port setup"**:
227 227  
228 +(% class="box infomessage" %)
229 +(((
230 +**root@dragino-2406ef:~~# minicom -s**
231 +)))
228 228  
229 -(% style="color:red" %)**Note:**
233 +[[image:image-20221029174637-2.png||height="410" width="524"]]
230 230  
231 - **Path**: System ~-~-> Built-in Server
232 232  
236 +And then, change the setting:
233 233  
234 -**Troubleshooting:**
238 +(% class="box infomessage" %)
239 +(((
240 +**Serial Device :** **/dev/ttyUSB0**
235 235  
242 +**Bps/Par/Bits : 9600 8N1**
243 +)))
236 236  
237 -**~ 1. URL does not jump properly**
238 238  
239 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
246 +(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**(%%)
247 +(% style="color:red" %)[[image:image-20221029174703-3.png]]
240 240  
241 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
242 242  
250 +Enter **AT+CFG **in the interface to get the configuration,
243 243  
244 244  
245 -== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
253 +(% class="box infomessage" %)
254 +(((
255 +AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
256 +AT+GROUPMOD=0,0  ~-~--> TX and RX group
257 +AT+BW=0,0  ~-~--> TX and RX Bandwidth
258 +AT+SF=12,12  ~-~--> TX and RX Spreading Factor
259 +AT+POWER=14  ~-~--> TX Power Range
260 +AT+CRC=1,1  ~-~--> TX and RX CRC Type
261 +AT+HEADER=0,0  ~-~--> TX and RX Header Type
262 +AT+CR=1,1  ~-~--> TX and RX Coding Rate
263 +AT+IQ=0,0  ~-~--> TX and RX InvertIQ
264 +AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length
265 +AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
266 +AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
267 +AT+RXDAFORM=1 
268 +)))
246 246  
270 +== **4.2 Example: LG01v2 Peer-to-Peer** ==
247 247  
248 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
249 249  
250 -Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
273 +(% style="color:red" %)**LG01v2 as Receiver: (configured as AT+RXMOD=65535,2)**
251 251  
275 +[[image:image-20221031091652-2.png]]
252 252  
253 -Login account:
254 254  
255 -**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
278 +(% style="color:red" %)**Sender:**
256 256  
257 -**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
258 258  
281 +[[image:image-20221031092053-4.png]]
259 259  
260 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725171719-1.png?width=769&height=570&rev=1.1||alt="image-20220725171719-1.png"]]
261 261  
284 +Instruction for LA66 Peer-to-Peer firmware :[[ **Instruction **>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]
285 +)))
262 262  
263 263  
264 -== **4.2 Application Server ~-~- Node-Red** ==
288 += **5. Build in Server** =
265 265  
266 266  
267 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
291 +The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
268 268  
269 269  
270 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
294 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820115644-1.png?width=778&height=217&rev=1.1||alt="image-20220820115644-1.png"]]
271 271  
272 272  
273 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
297 +(% style="color:red" %)**Note:**
274 274  
299 + **Path**: System ~-~-> Built-in Server
275 275  
276 276  
277 -= **5. How users can access LG01v2 using serial USB** =
302 +**Troubleshooting:**
278 278  
279 279  
280 -(% style="color:blue" %)**USB TTL to LG01v2  Connection:**
305 +**~ 1. URL does not jump properly**
281 281  
307 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
282 282  
283 -Port 1 of the UART on the LG01v2 is GND
284 284  
285 -(% class="box infomessage" %)
286 -(((
287 -**TXD  <~-~--> UART RXD (Gray line)**
288 288  
289 -**RXD  <~-~--> UART TXD (White line)**
311 +== **5.1 Application Server ~-~- Node-Red** ==
290 290  
291 -**GND <~-~--> GND (Black line)**
292 -)))
293 293  
314 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
294 294  
295 -**LG01v2 UART connection photo**
296 296  
297 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
317 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
298 298  
299 299  
320 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
300 300  
301 -In the PC, you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LG01v2. LG01v2 will output system info once power on as below:
302 302  
323 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01v2 using serial USB**(%%) =
303 303  
304 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
305 305  
306 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
326 +(% style="color:blue" %)**USB TTL to LG01v2  Connection:**
307 307  
308 -= **3. How to configure the LA66 module** =
309 309  
329 +Port 1 of the UART on the LG01v2 is GND
310 310  
311 -== **3.1 Access the LA66 module** ==
312 -
313 -
314 -Users can access the LA66 module by running the following command, then select the option **''serial port setup"**:
315 -
316 316  (% class="box infomessage" %)
317 317  (((
318 -**root@dragino-2406ef:~~# minicom -s**
319 -)))
333 +**TXD  <~-~--> UART RXD (Gray line)**
320 320  
321 -[[image:image-20221029174637-2.png||height="410" width="524"]]
335 +**RXD  <~-~--> UART TXD (White line)**
322 322  
323 -
324 -And then, change the setting:
325 -
326 -(% class="box infomessage" %)
327 -(((
328 -**Serial Device :** **/dev/ttyUSB0**
329 -
330 -**Bps/Par/Bits : 9600 8N1**
337 +**GND <~-~--> GND (Black line)**
331 331  )))
332 332  
333 333  
334 -(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**(%%)
335 -(% style="color:red" %)[[image:image-20221029174703-3.png]]
341 +**LG01v2 UART connection photo**
336 336  
343 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
337 337  
338 -Enter **AT+CFG **in the interface to get the configuration,
339 339  
340 -[[image:image-20221029172156-1.png||height="315" width="358"]]
341 341  
347 +In the PC, you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LG01v2. LG01v2 will output system info once power on as below:
342 342  
343 -LG01v2 Peer-to-Peer example:
344 344  
345 -(% style="color:red" %)**LG01v2 as Receiver: (configured as AT+RXMOD=65535,2)**
350 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
346 346  
347 -[[image:image-20221031091652-2.png]]
352 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
348 348  
349 349  
350 -(% style="color:red" %)**Sender:**
355 += **7. FAQ** =
351 351  
352 352  
353 -[[image:image-20221031092053-4.png]]
358 +== **7.1 How does LG01v2 communicate with Lora shield (LoRa.h)** ==
354 354  
355 355  
356 -Instruction for LA66 Peer-to-Peer firmware :[[ **Instruction **>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]
357 -)))
361 +(% style="color:red" %)Prerequisites: The configurations of LG01v2 and Lora shield must match
358 358  
359 -= **7. Trouble Shooting** =
363 +**LG01v2 configuration:**
360 360  
365 +[[image:image-20221101160705-1.png]]
361 361  
362 -== 7.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
363 363  
368 +**Lora shield configuration:**
364 364  
370 +Lora Shield example: [[attach:LoRa_Shield_Sketch_For_MQTT.ino||target="_blank"]] , [[attach:arduino-LoRa-master.zip||target="_blank"]]
365 365  
372 +[[image:image-20221101161318-2.png]]
366 366  
367 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
368 368  
369 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
375 +**Test LG01v2 to receive Lora Shield data:**
370 370  
377 +[[image:image-20221101161951-3.png]]
371 371  
372 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
373 373  
374 -**Click the update URL button to configure the URL with the current eth port address.**
380 +**Test the LG01v2 to send data:**
375 375  
382 +[[image:image-20221101162527-4.png]]
376 376  
377 377  
378 -
379 -
380 380  = (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
381 381  
382 382  
LoRa_Shield_Sketch_For_MQTT.ino
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +2.9 KB
Content
... ... @@ -1,0 +1,118 @@
1 +#include <SPI.h>
2 +#include <LoRa.h>
3 +
4 +// This is the LoRa Node side sketch for the MQTT example: http://wiki.dragino.com/index.php?title=MQTT_Forward_Instruction#Example_to_communicate_to_a_simple_MQTT_server
5 +
6 +float tem,hum;
7 +char tem_1[8]={"\0"},hum_1[8]={"\0"};
8 +char *node_id = "<4567>"; //From LG01 via web Local Channel settings on MQTT.Please refer <> dataformat in here.
9 +uint8_t datasend[36];
10 +unsigned int count = 1;
11 +unsigned long new_time,old_time=0;
12 +
13 +void setup()
14 +{
15 + Serial.begin(9600);
16 + while (!Serial);
17 + Serial.println(F("Start MQTT Example"));
18 + if (!LoRa.begin(868100000)) //868000000 is frequency
19 + {
20 + Serial.println("Starting LoRa failed!");
21 + while (1);
22 + }
23 + // Setup Spreading Factor (6 ~ 12)
24 + LoRa.setSpreadingFactor(12);
25 +
26 + // Setup BandWidth, option: 7800,10400,15600,20800,31250,41700,62500,125000,250000,500000
27 + //Lower BandWidth for longer distance.
28 + LoRa.setSignalBandwidth(125000);
29 +
30 + // Setup Coding Rate:5(4/5),6(4/6),7(4/7),8(4/8)
31 + LoRa.setCodingRate4(5);
32 + LoRa.setSyncWord(0x12);
33 + void disableCrc();
34 + LoRa.disableInvertIQ();
35 + LoRa.explicitHeaderMode();
36 + Serial.println("LoRa init succeeded.");
37 + LoRa.onReceive(onReceive);
38 + LoRa.receive();
39 +}
40 +
41 +void dhtTem()
42 +{
43 + tem = random(15,40);
44 + hum = random(40,80);
45 + Serial.println(F("The temperature and humidity:"));
46 + Serial.print("[");
47 + Serial.print(tem);
48 + Serial.print("℃");
49 + Serial.print(",");
50 + Serial.print(hum);
51 + Serial.print("%");
52 + Serial.print("]");
53 + Serial.println("");
54 +}
55 +void dhtWrite()
56 +{
57 + char data[50] = "\0";
58 + //for(int i = 0; i < 50; i++)
59 + //{
60 + // data[i] = node_id[i];
61 + //}
62 +
63 + dtostrf(tem,0,1,tem_1);
64 + dtostrf(hum,0,1,hum_1);
65 +
66 + // Serial.println(tem_1);
67 + strcat(data,"tem=");
68 + strcat(data,tem_1);
69 + strcat(data,"&hum=");
70 + strcat(data,hum_1);
71 + strcpy((char *)datasend,data);
72 +
73 + //Serial.println((char *)datasend);
74 + //Serial.println(sizeof datasend);
75 +
76 +}
77 +
78 +
79 +void SendData()
80 +{
81 + LoRa.beginPacket();
82 + LoRa.print((char *)datasend);
83 + LoRa.endPacket();
84 + Serial.println("Packet Sent");
85 +}
86 +
87 +
88 +
89 +void loop()
90 +{
91 + new_time=millis();
92 + if (new_time - old_time >= 30000 || old_time == 0)
93 + {
94 + old_time = new_time;
95 + Serial.print("########### ");
96 + Serial.print("COUNT=");
97 + Serial.print(count);
98 + Serial.println(" ###########");
99 + count++;
100 + dhtTem();
101 + dhtWrite();
102 + SendData();
103 + LoRa.receive();
104 + }
105 +}
106 +
107 +void onReceive(int packetSize) {
108 +
109 + // received a packet
110 + Serial.print("Received packet : ");
111 +
112 + // read packet
113 + for (int i = 0; i < packetSize; i++) {
114 + Serial.print((char)LoRa.read());
115 + }
116 + Serial.print("\n\r");
117 +}
118 +
arduino-LoRa-master.zip
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.6 KB
Content
image-20221101160705-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +6.1 KB
Content
image-20221101161318-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +46.3 KB
Content
image-20221101161951-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +131.0 KB
Content
image-20221101162527-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +290.1 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0