Last modified by Kilight Cao on 2024/03/04 09:10
<
From version < 148.2 >
edited by Xiaoling
on 2023/12/15 10:28
To version < 125.1 >
edited by Kilight Cao
on 2023/05/06 11:37
>
Change comment: Uploaded new attachment "image-20230506113737-9.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Kilight
Content
... ... @@ -7,7 +7,7 @@
7 7  
8 8  )))
9 9  
10 -**Table of Contents:**
10 +**Table of Contents：**
11 11  
12 12  {{toc/}}
13 13  
... ... @@ -16,28 +16,26 @@
16 16  
17 17  
18 18  
19 -= 1. Introduction =
19 += **1. Introduction** =
20 20  
21 -== 1.1 What is LG01v2 ==
21 +== **1.1 What is LG01v2** ==
22 22  
23 23  
24 24  (((
25 25  (((
26 -The LG01v2 is an (% style="color:blue" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LG01v2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  
28 -LG01v2 is specially designed for (% style="color:blue" %)**peer-to-peer LoRa**(%%) protocol instead of LoRaWAN protocol. The LG01v2 uses a single-channel LoRa module to minimize the deployment cost for a private p2p LoRa wireless network.
29 -
30 -(% style="color:red" %)**Note: The LG01v2 can't register and connect to the LoRaWAN server(Such as The Things NetWork, AWS, or Chirpstack..)**
28 +LG01v2 is specially design for (% style="color:green" %)**peer to peer LoRa**(%%) protocol instead of LoRaWAN protocol. The LG01v2 use single channel LoRa module to minimize the deployment cost for a private p2p LoRa wireless network.
31 31  )))
32 32  
33 33  (((
34 -LG01v2 uses Open Source Linux system. User can modify the Linux part and develop customize software base on it. It has (% style="color:blue" %)**1.2Ghz Quad-Core CPU**(%%) , (% style="color:blue" %)**4GB eMMC storage**(%%) and (% style="color:blue" %)**512MB RAM**(%%) for most application.
32 +LG01v2 uses Open Source Linux system. User can modify the Linux part and develop customize software base on it. It has (% style="color:green" %)**1.2Ghz Quad-Core CPU**(%%) , (% style="color:green" %)**4GB eMMC storage**(%%) and (% style="color:green" %)**512MB RAM**(%%) for most application.
35 35  
36 -LG01v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
34 +LG01v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
37 37  )))
38 38  
39 39  
40 -== 1.2 Specifications ==
38 +== **1.2 Specifications** ==
41 41  
42 42  
43 43  (% style="color:#037691" %)**Hardware System:**
... ... @@ -57,7 +57,7 @@
57 57  * Storage Temperature: -20 ~~ 65°C
58 58  * Power Input: 5V, 2A, DC
59 59  
60 -== 1.3 Features ==
58 +== **1.3 Features** ==
61 61  
62 62  
63 63  * Open Source Debian system
... ... @@ -67,42 +67,48 @@
67 67  * LoRa Gateway
68 68  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
69 69  
70 -== 1.4 Block Diagram ==
68 +== **1.4 Block Diagram** ==
71 71  
72 72  
73 73  
74 -== 1.5 LED Indicators ==
72 +== **1.5 LED Indicators** ==
75 75  
76 76  
77 77  LG01-V2 has totally four LEDs, They are:
78 78  
79 79  
80 -(% style="color:blue" %)**➢ Power LED**[[image:image-20231014092959-4.png]](%%): This RED LED will be solid if the device is properly powered
78 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
81 81  
82 -(% style="color:blue" %)**➢ ETH LED**[[image:image-20231014092934-2.png]](%%):  This RGB LED will blink GREEN when the ETH port is connecting
80 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
83 83  
84 -(% style="color:blue" %)**➢ SYS LED**[[image:image-20231014092954-3.png]](%%):  Undefined yet. 
82 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
85 85  
86 -(% style="color:blue" %)**➢ WIFI LED**[[image:image-20231014092843-1.png]](%%): This LED shows the WIFI interface connection status.
84 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
87 87  
86 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
88 88  
89 -== 1.6 Button Intruction ==
88 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
90 90  
90 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
91 91  
92 +
93 +== **1.6 Button Intruction** ==
94 +
95 +
92 92  LG01-V2 has a black toggle button, which is:
93 93  
94 94  
95 -(% style="color:blue" %)**➢ Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
99 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
96 96  
97 - **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
101 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
98 98  
99 99  
100 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
104 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
101 101  
102 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
106 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
103 103  
104 104  
105 -= 2. Quick Start =
109 += **2. Quick Start** =
106 106  
107 107  
108 108  The LG01-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
... ... @@ -110,9 +110,9 @@
110 110  In most cases, the first thing you need to do is make the LG01-v2 accessible to the network.
111 111  
112 112  
113 -== 2.1 Access and Configure LG01-v2 ==
117 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
114 114  
115 -=== 2.1.1 Find IP address of LG01-v2 ===
119 +=== **2.1.1 connect the network.** ===
116 116  
117 117  
118 118  ==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
... ... @@ -136,7 +136,7 @@
136 136  
137 137  2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
138 138  
139 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
143 +Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
140 140  
141 141  
142 142  As in the below photo:
... ... @@ -146,11 +146,11 @@
146 146  
147 147  Configure computer Ethernet port steps video: **[[fallback ip.mp4>>url:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/fallback%20ip.mp4?rev=1.1]]**
148 148  
149 -If you still can't access the LG01v2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/LG01v2/#H10.1A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
153 +If you still can't access the LG01v2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/LG01v2/#H10.1A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
150 150  
151 151  3. In the PC, use IP address 172.31.255.254 to access the LG01v2 via Web or Console.
152 152  
153 -[[image:image-20230506115438-13.png||height="554" width="1047"]]
157 +[[image:image-20230504095502-2.png||height="545" width="1065"]]
154 154  
155 155  
156 156  
... ... @@ -163,26 +163,25 @@
163 163  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
164 164  
165 165  
166 -[[image:image-20230506113332-2.png]]
170 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102702-6.png?rev=1.1||alt="image-20220622102702-6.png"]]
167 167  
168 168  
169 169  **Wi-Fi configuration successful**
170 170  
171 171  
172 -[[image:image-20230506113432-3.png||height="397" width="855"]]
176 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102847-7.png?rev=1.1||alt="image-20220622102847-7.png"]]
173 173  
174 174  
175 175  === 2.1.2 Access Configure Web UI ===
176 176  
177 -
178 178  **Web Interface**
179 179  
180 -Open a browser on the PC and type the LG01v2 ip address (depends on your connect method)
183 +Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
181 181  
182 182  
183 183  [[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
184 184  
185 -You will see the login interface of LG01v2 as shown below.
188 +You will see the login interface of LPS8-V2 as shown below.
186 186  
187 187  The account details for Web Login are:
188 188  
... ... @@ -193,81 +193,59 @@
193 193  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230106153501-1.png?width=894&height=367&rev=1.1||alt="image-20230106153501-1.png"]]
194 194  
195 195  
196 -= 3. Web Configure Pages =
199 += **3. Web Configure Pages** =
197 197  
198 -== 3.1 Home ==
201 +== **3.1 Home** ==
199 199  
200 200  
201 -Shows the system running status:
204 +//Shows the system running status~://
202 202  
203 -[[image:image-20230506113531-4.png||height="430" width="818"]]
206 +[[image:image-20221104155612-1.png||height="497" width="942"]]
204 204  
205 205  
206 -== 3.2 Network Settings ==
209 +== **3.2 Network Settings** ==
207 207  
208 -=== 3.2.1 Network ~-~-> WiFi ===
211 +=== **3.2.1 Network ~-~-> WiFi** ===
209 209  
210 210  
211 -[[image:image-20230506113602-5.png]]
214 +[[image:image-20221104155654-2.png||height="319" width="813"]]
212 212  
213 213  
214 -=== 3.4.2 Network ~-~-> System Status ===
217 +=== **3.4.2 Network ~-~-> System Status** ===
215 215  
216 216  
217 -[[image:image-20230506113623-6.png||height="511" width="672"]]
220 +[[image:image-20221104155724-3.png||height="679" width="861"]]
218 218  
219 219  
220 -== 3.5 System ==
223 +=== **3.4.3 Network ~-~-> Firewall** ===
221 221  
222 -=== 3.5.1  System ~-~-> System Overview ===
223 223  
226 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616115351-6.png?width=661&height=244&rev=1.1||alt="image-20220616115351-6.png"]]
224 224  
225 -Shows the system info:
226 226  
227 -[[image:image-20230506113705-7.png]]
229 +== **3.5 System** ==
228 228  
231 +=== **3.5.1  System ~-~-> System Overview** ===
229 229  
230 -=== 3.5.2 System ~-~-> Backup/Restore ===
231 231  
234 +Shows the system info:
232 232  
233 -[[image:image-20230506113722-8.png||height="254" width="797"]]
236 +[[image:image-20221104155907-4.png]]
234 234  
235 235  
236 -=== 3.5.3 System ~-~-> System General ===
239 +=== **3.5.2 System ~-~-> Backup/Restore** ===
237 237  
238 238  
239 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
242 +[[image:image-20221104155928-5.png||height="334" width="880"]]
240 240  
241 -In addition, Users can customize the FallBack IP address.
242 242  
243 -[[image:image-20230506113813-10.png||height="659" width="749"]]
245 += (% id="cke_bm_1978S" style="display:none" %)** **(%%)**4. Build in Server** =
244 244  
245 245  
246 -=== 3.5.4 System ~-~-> Remoteit ===
247 -
248 -
249 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
250 -
251 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
252 -
253 -[[image:image-20230506113831-11.png||height="567" width="748"]]
254 -
255 -
256 -=== 3.5.5 System ~-~-> Package Management ===
257 -
258 -
259 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
260 -
261 -[[image:image-20230506114127-12.png||height="803" width="762"]]
262 -
263 -
264 -= (% id="cke_bm_1978S" style="display:none" %) (%%)4. Build in Server =
265 -
266 -
267 267  The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
268 268  
269 269  
270 -[[image:image-20230506113737-9.png]]
251 +[[image:image-20221104155949-6.png||height="315" width="1023"]]
271 271  
272 272  
273 273  (% style="color:red" %)**Note:**
... ... @@ -282,7 +282,7 @@
282 282   For the Node-Red, you can use the local IP address and the port is 1880 to access it.
283 283  
284 284  
285 -== 4.1 Application Server ~-~- Node-Red ==
266 +== **4.1 Application Server ~-~- Node-Red** ==
286 286  
287 287  
288 288  You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
... ... @@ -294,24 +294,23 @@
294 294  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
295 295  
296 296  
297 -= 5. How to configure the Lora Gateway =
278 += **5. How to configure the Lora Gateway** =
298 298  
299 -== 5.1 Configure and Debug LoRa wireless of LG01v2 ==
280 +== **5.1 Configure and Debug LoRa wireless of LG01v2** ==
300 300  
301 301  
302 302  First, the user needs to access the Linux console of LG01v2 via ssh
303 303  
304 -**IP address:  (% style="color:blue" %)IP address of LG01v2(%%)**
285 +IP address:  IP address of LG01v2
305 305  
306 -**Port:  (% style="color:blue" %)22(%%)**
287 +Port:         22
307 307  
308 -**User Name:   (% style="color:blue" %)root(%%)**
289 +User Name:      (% style="color:#4f81bd" %)**root**
309 309  
310 -**Password:  (% style="color:blue" %)dragino(default)(%%)**
291 +Password:         (% style="color:#4f81bd" %)**dragino**(%%) (default)
311 311  
312 312  [[image:image-20230504100722-3.png||height="228" width="908"]]
313 313  
314 -
315 315  Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**:
316 316  
317 317  (% class="box infomessage" %)
... ... @@ -359,9 +359,9 @@
359 359  )))
360 360  
361 361  
362 -== 5.2 Example: LG01v2 ==
342 +== **5.2 Example: LG01v2** ==
363 363  
364 -=== 5.2.1 Introduce for the example: ===
344 +=== **5.2.1 Introduce for the example:** ===
365 365  
366 366  
367 367  [[image:image-20221104102736-3.png||height="282" width="723"]]
... ... @@ -372,7 +372,7 @@
372 372  * **LA66 Shield + UNO + DHT11**: The UNO will get the temperature and humidity and broadcast the value via LoRa protocol.
373 373  * **LG01v2** : LG01v2 is set to listening the LoRa Channel which LA66 is broadcasting. When LG01v2 get the data from LA66, LG01v2 will plot the data in built-in IoT server.
374 374  
375 -=== 5.2.2 Set Up LA66 Shield + UNO ===
355 +=== **5.2.2 Set Up LA66 Shield + UNO** ===
376 376  
377 377  
378 378  ==== **Set up LA66 Module** ====
... ... @@ -454,7 +454,7 @@
454 454  [[image:image-20221108175113-9.png||height="556" width="998"]]
455 455  
456 456  
457 -=== 5.2.3 Set Up LG01v2 ===
437 +=== **5.2.3 Set Up LG01v2** ===
458 458  
459 459  
460 460  Configure LG01v2 LoRa channel parameters so it can get data from LA66 Shield
... ... @@ -479,7 +479,7 @@
479 479  )))
480 480  
481 481  
482 -=== 5.2.4 Test result ===
462 +=== **5.2.4 Test result** ===
483 483  
484 484  
485 485  After the above configuration is complete, users can send test simulation data to check whether the configuration is correct, In LA66 sheild serial console send:(% style="color:red" %)**(AT+SEND=1,hello world,2,3).**
... ... @@ -496,7 +496,7 @@
496 496  [[image:image-20221108170314-3.png]]
497 497  
498 498  
499 -=== 5.2.5 Plot data chart in LG01v2 ===
479 +=== **5.2.5 Plot data chart in LG01v2** ===
500 500  
501 501  
502 502  User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
... ... @@ -513,16 +513,48 @@
513 513  [[image:image-20221108180458-11.png||height="402" width="1137"]]
514 514  
515 515  
496 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**v(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
516 516  
517 -= 6. OTA System Update =
518 518  
499 +(% style="color:blue" %)**USB TTL to LG01v2  Connection:**
519 519  
501 +
502 +Port 1 of the UART on the LG01v2 is GND
503 +
504 +(% class="box infomessage" %)
505 +(((
506 +**TXD  <~-~--> UART RXD (Gray line)**
507 +
508 +**RXD  <~-~--> UART TXD (White line)**
509 +
510 +**GND <~-~--> GND (Black line)**
511 +)))
512 +
513 +
514 +**LG01v2 UART connection photo**
515 +
516 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
517 +
518 +
519 +
520 +In the PC, you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LG01v2. LG01v2 will output system info once power on as below:
521 +
522 +
523 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
524 +
525 +
526 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
527 +
528 +
529 += **7. OTA System Update** =
530 +
531 +
520 520  LG01v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
521 521  
522 522  
523 -= 7. FAQ =
535 += **8. FAQ** =
524 524  
525 -== 7.1 How does LG01v2 communicate with Lora shield (LoRa.h) ==
537 +== **8.1 How does LG01v2 communicate with Lora shield (LoRa.h)** ==
526 526  
527 527  
528 528  This example describes how to use LG01v2, LoRa Shield to set up a LoRa network,
... ... @@ -571,7 +571,7 @@
571 571  [[image:image-20221101162527-4.png]]
572 572  
573 573  
574 -== 7.2 How does LG01v2 communicate with Heltec LoRa Node ==
586 +== **8.2 How does LG01v2 communicate with Heltec LoRa Node** ==
575 575  
576 576  
577 577  This example describes how to use LG01v2 and Heltec LoRa Node to set up a LoRa network,
... ... @@ -612,79 +612,15 @@
612 612  [[image:image-20221112163119-4.png||height="808" width="560"]]
613 613  
614 614  
615 -== 7.3 How does LG01v2 communicate with LoRaWAN node ==
627 += **9. OTA System Update** =
616 616  
629 +LG01v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
617 617  
618 -This example describes how to use LG01v2 and LSN50 to set up a  network,
619 619  
620 -In this case, users need to set LSN50 to work in ABP mode and transmit in only one frequency.
632 += **10. Trouble Shooting** =
621 621  
622 -Assume we have a LG01v2 working in the frequency 868100000 now, below is the steps.
634 +== 10.1  Fallback IP does not work, how can users check ==
623 623  
624 -
625 -**Step1: **Configure the LG01v2
626 -
627 -(% class="box infomessage" %)
628 -(((
629 -AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
630 -AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
631 -AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
632 -AT+SYNCWORD=1  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
633 -)))
634 -
635 -**Step2:  **Run AT commands to make the LSN50 work in Single frequency and ABP mode. Below are the AT commands:
636 -
637 -(% class="box infomessage" %)
638 -(((
639 -AT+FDR  ~-~--> Reset Parameters to Factory Default, Keys Reserve
640 -AT+NJM=0  ~-~-->  Set to ABP mode
641 -AT+ADR=0  ~-~-->  Set the Adaptive Data Rate Off
642 -AT+DR=0  ~-~--> Set Data Rate (Set AT+DR=3 for 915 band)
643 -AT+TDC=300000  ~-~-->  Set transmit interval to 5 minutes
644 -AT+CHS=868100000  ~-~--> Set transmit frequency to 868.1Mhz
645 -AT+DADDR=FFFFF111  ~-~--> Set Device Address to 26 01 1A F1
646 -ATZ  ~-~--> Reset MCU
647 -)))
648 -
649 -**Step3:  **Check result
650 -
651 -
652 -
653 -User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
654 -
655 -User can import this example in Node-Red: [[attach:LG01v2_LSN50v2_S31.json||target="_blank"]]
656 -
657 -
658 -First the user needs to fill in the NwkSkey and AppSkey in the LoraWan Packet Decrypter node.
659 -
660 -[[image:image-20230620103535-2.png||height="591" width="1138"]]
661 -
662 -[[image:image-20230620103153-1.png||height="610" width="1141"]]
663 -
664 -
665 -The data will be displayed in the built-in node-red UI
666 -
667 -**Browser input: (% style="background-color:yellow" %)__//http:~/~/<local-IPV4-address>//__(%%)**
668 -
669 -[[image:image-20230620103923-3.png||height="476" width="1138"]]
670 -
671 -
672 -== 7.4 How can users factory reset LG01v2 ==
673 -
674 -
675 -Users can download the image of LG01v2 from this link：[[dragino-lg01v2-1.7-0210>>https://www.dropbox.com/scl/fi/g0si61lcrvdjyto4ma951/dragino-lg01v2-1.7-0210.zip?rlkey=t03oqo493r2p7ign488rs2jsv&dl=0]]
676 -
677 -
678 -Then follow the steps in the link below to restore factory Settings to LG01v2：
679 -
680 -[[How to flash a new image(OS) to the gateway>>url:https://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
681 -
682 -
683 -= 8. Trouble Shooting =
684 -
685 -== 8.1  Fallback IP does not work, how can users check ==
686 -
687 -
688 688  When the computer has completed the above fallback IP configuration,the LG01v2 Web UI is still not accessible via fallback IP.
689 689  
690 690  
... ... @@ -698,34 +698,32 @@
698 698  
699 699  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413170246-4.png?rev=1.1||alt="image-20230413170246-4.png"]]
700 700  
701 -
702 702  **2. Check whether the firewall is disabled**
703 703  
704 704  If the firewall is not down, this will affect access to the gateway.
705 705  
706 706  
707 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
654 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**11. Supports**(%%) =
708 708  
709 709  
710 710  (((
711 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
658 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
712 712  )))
713 713  
714 714  (((
715 -With your question as detailed as possible. We will reply and help you in the shortest.
662 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
716 716  
717 717  
718 -= 10. Reference =
665 += **12. Reference** =
719 719  
720 720  
721 721  * Install Tago Core: Refer **Install Tago Core in LG01v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
722 -
723 723  * [[Advance OS Reference Guide for L>>doc:Main.Armbian OS instruction.WebHome]]G01v2.
724 724  
725 725  
726 726  )))
727 727  
728 -= 11. Order Info =
674 += **13. Order Info** =
729 729  
730 730  
731 731  (% style="color:#0000ff" %)**LG01v2-XXX-YYY**
... ... @@ -737,15 +737,15 @@
737 737  
738 738  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
739 739  
740 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
741 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America: Verizon, AT&T(FirstNet), U.S.Cellular; Canada: Telus
742 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
743 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
686 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
687 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
688 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
689 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
744 744  
745 745  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
746 746  
747 747  
748 -= 12. Manufacturer Info =
694 += **14. Manufacturer Info** =
749 749  
750 750  
751 751  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -755,7 +755,7 @@
755 755  LongCheng Street, LongGang District ; Shenzhen 518116,China
756 756  
757 757  
758 -= 13. FCC Warning =
704 += **15. FCC Warning** =
759 759  
760 760  
761 761  (((
LG01v2_LSN50v2_S31.json
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -16.5 KB
Content
... ... @@ -1,587 +1,0 @@
1 -[
2 - {
3 - "id": "5e07f5eeeb2a969b",
4 - "type": "tab",
5 - "label": "流程 1",
6 - "disabled": false,
7 - "info": "",
8 - "env": []
9 - },
10 - {
11 - "id": "9c26fa2f19e2b556",
12 - "type": "function",
13 - "z": "5e07f5eeeb2a969b",
14 - "name": "hex to base64",
15 - "func": "var input = msg.payload;\nvar base64 = Buffer.from(input, 'hex').toString('base64');\nmsg.payload = base64;\nreturn msg;",
16 - "outputs": 1,
17 - "noerr": 0,
18 - "initialize": "",
19 - "finalize": "",
20 - "libs": [],
21 - "x": 220,
22 - "y": 160,
23 - "wires": [
24 - [
25 - "075bc9172a4c6570",
26 - "3601a98894805fbe"
27 - ]
28 - ]
29 - },
30 - {
31 - "id": "ee0480c81e66d657",
32 - "type": "function",
33 - "z": "5e07f5eeeb2a969b",
34 - "name": "function 4",
35 - "func": "var bytes = msg.payload[\"uplink_message\"]\nvar data = msg.payload[\"out\"]\nvar mode = (parseInt(data.substring(12, 14), 16) & 0x7C) >> 2;\nif (mode != 2)\n{\nvar bat = (parseInt(data.substring(0,4),16)&0x3FFF)/1000;\nvar TempC1 = (parseFloat(parseInt(data.substring(4, 8),16)/10).toFixed(2));\nvar ADC_CH0V = (parseInt(data.substring(8, 12), 16) ) / 1000;\nvar Digital_IStatus = (parseInt((data.substring(8, 12),16) & 0x02))?\"H\":\"L\"; \n\nif (mode != 6) {\n\n var EXTI_Trigger = ((parseInt(data.substring(12, 14), 16) & 0x01))? \"TRUE\" : \"FALSE\";\n\n var Door_status = ((parseInt(data.substring(12, 14), 16) & 0x80))? \"CLOSE\" : \"OPEN\";\n\n}\n}\nif (mode == 0) {\n\n var Work_mode = \"IIC\";\n\n if ((parseInt(data.substring(18, 22), 16)) == 0){\n\n var Illum = (parseInt(data.substring(8, 12), 16));\n\n }\n\n else {\n\n var TempC_SHT = parseFloat(((parseInt(data.substring(14, 18), 16)) / 10).toFixed(2));\n\n var Hum_SHT = parseFloat((((parseInt(data.substring(18, 22), 16))) / 10).toFixed(1));\n\n }\n \n}\n\nelse if (mode == 1) {\n\n var Work_mode = \" Distance\";\n\n var Distance_cm = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(1));\n\n if (((parseInt(data.substring(18, 22), 16))) != 65535){\n\n var Distance_signal_strength = parseFloat(((parseInt(data.substring(18, 22), 16))).toFixed(0));\n\n }\n\n}\n\nelse if (mode == 2) {\n\n var Work_mode = \" 3ADC\";\n\n var BatV = (parseInt(data.substring(18, 22), 16)) / 10;\n\n var ADC_CH0V = ((parseInt(data.substring(0, 4), 16))) / 1000;\n\n var ADC_CH1V = ((parseInt(data.substring(4, 8), 16))) / 1000;\n\n var ADC_CH4V = ((parseInt(data.substring(8, 12), 16))) / 1000;\n\n var Digital_IStatus = ((parseInt(data.substring(12, 14), 16)) & 0x02) ? \"H\" : \"L\";\n\n var EXTI_Trigger = ((parseInt(data.substring(12, 14), 16)) & 0x01) ? \"TRUE\" : \"FALSE\";\n\n var Door_status = ((parseInt(data.substring(13, 14), 16)) & 0x80) ? \"CLOSE\" : \"OPEN\";\n\n if ((parseInt(data.substring(18, 22), 16) === 0)) {\n\n var Illum = ((parseInt(data.substring(14, 18), 16)));\n\n }\n\n else {\n\n var TempC_SHT = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(2));\n\n var Hum_SHT = parseFloat((((parseInt(data.substring(18, 24), 16))) / 10).toFixed(1));\n\n }\n\n}\n\nelse if (mode == 3) {\n\n var Work_mode = \"3DS18B20\";\n\n var TempC2 = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(2));\n\n var TempC3 = parseFloat((((parseInt(data.substring(18, 24), 16))) / 10).toFixed(1));\n\n\n\n}\n\nelse if (mode == 4) {\n\n var Work_mode = \"Weight\";\n\n var Weight = ((parseInt(data.substring(14, 18), 16)));\n\n}\n\nelse if (mode == 5) {\n\n var Work_mode = \"Count\";\n\n var Count = ((parseInt(data.substring(14, 22), 16)));\n\n}\n\n\n\nvar b = { payload: bat }, c = { payload: TempC1 }, d = { payload: ADC_CH0V }, e = { payload: Digital_IStatus }, f = { payload: EXTI_Trigger }, g = { payload: Door_status }, j = { payload: TempC_SHT }, s = { payload: Hum_SHT }, k = { payload: Work_mode };\nreturn [b,c,d,e,f,g,j,k,s];",
36 - "outputs": 9,
37 - "noerr": 0,
38 - "initialize": "",
39 - "finalize": "",
40 - "libs": [],
41 - "x": 660,
42 - "y": 300,
43 - "wires": [
44 - [
45 - "fd22b92d2b8de0fb"
46 - ],
47 - [
48 - "3307256a4e1ea53a"
49 - ],
50 - [
51 - "a3fd8302ec399e31"
52 - ],
53 - [
54 - "c7d1f63ff5f0026a"
55 - ],
56 - [
57 - "159967056da52706"
58 - ],
59 - [
60 - "a21581a41adc1714"
61 - ],
62 - [
63 - "7bb78b78445ac9e3"
64 - ],
65 - [
66 - "0364752170ed6228"
67 - ],
68 - [
69 - "65293155d71d54b9"
70 - ]
71 - ]
72 - },
73 - {
74 - "id": "e763b293d42dbdd5",
75 - "type": "change",
76 - "z": "5e07f5eeeb2a969b",
77 - "name": "",
78 - "rules": [
79 - {
80 - "t": "change",
81 - "p": "payload",
82 - "pt": "msg",
83 - "from": "Data: (HEX:)",
84 - "fromt": "str",
85 - "to": "",
86 - "tot": "str"
87 - },
88 - {
89 - "t": "change",
90 - "p": "payload",
91 - "pt": "msg",
92 - "from": " ",
93 - "fromt": "str",
94 - "to": "",
95 - "tot": "str"
96 - }
97 - ],
98 - "action": "",
99 - "property": "",
100 - "from": "",
101 - "to": "",
102 - "reg": false,
103 - "x": 420,
104 - "y": 60,
105 - "wires": [
106 - [
107 - "9c26fa2f19e2b556",
108 - "416a930e89291528"
109 - ]
110 - ]
111 - },
112 - {
113 - "id": "075bc9172a4c6570",
114 - "type": "lorawan-packet-decrypt-nwkey-appkey",
115 - "z": "5e07f5eeeb2a969b",
116 - "name": "FFFFF111",
117 - "nsw": "CCFFFFFFFFFFFFFFFFFFFFFFFFFFFFAA",
118 - "asw": "FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCC",
119 - "x": 510,
120 - "y": 160,
121 - "wires": [
122 - [
123 - "ee0480c81e66d657"
124 - ]
125 - ]
126 - },
127 - {
128 - "id": "13dc77a4e2bb4f72",
129 - "type": "serial in",
130 - "z": "5e07f5eeeb2a969b",
131 - "name": "",
132 - "serial": "bb1c0e81fd51fa9e",
133 - "x": 190,
134 - "y": 60,
135 - "wires": [
136 - [
137 - "e763b293d42dbdd5"
138 - ]
139 - ]
140 - },
141 - {
142 - "id": "3307256a4e1ea53a",
143 - "type": "ui_chart",
144 - "z": "5e07f5eeeb2a969b",
145 - "name": "",
146 - "group": "c1fddd37879528e5",
147 - "order": 1,
148 - "width": 0,
149 - "height": 0,
150 - "label": "TempC1",
151 - "chartType": "line",
152 - "legend": "false",
153 - "xformat": "HH:mm:ss",
154 - "interpolate": "linear",
155 - "nodata": "",
156 - "dot": false,
157 - "ymin": "",
158 - "ymax": "",
159 - "removeOlder": 1,
160 - "removeOlderPoints": "",
161 - "removeOlderUnit": "3600",
162 - "cutout": 0,
163 - "useOneColor": false,
164 - "useUTC": false,
165 - "colors": [
166 - "#1f77b4",
167 - "#aec7e8",
168 - "#ff7f0e",
169 - "#2ca02c",
170 - "#98df8a",
171 - "#d62728",
172 - "#ff9896",
173 - "#9467bd",
174 - "#c5b0d5"
175 - ],
176 - "outputs": 1,
177 - "useDifferentColor": false,
178 - "className": "",
179 - "x": 940,
180 - "y": 160,
181 - "wires": [
182 - []
183 - ]
184 - },
185 - {
186 - "id": "a3fd8302ec399e31",
187 - "type": "ui_chart",
188 - "z": "5e07f5eeeb2a969b",
189 - "name": "",
190 - "group": "6d46fdae9f413f7b",
191 - "order": 1,
192 - "width": 0,
193 - "height": 0,
194 - "label": "ADC_CH0V",
195 - "chartType": "line",
196 - "legend": "false",
197 - "xformat": "HH:mm:ss",
198 - "interpolate": "linear",
199 - "nodata": "",
200 - "dot": false,
201 - "ymin": "",
202 - "ymax": "",
203 - "removeOlder": 1,
204 - "removeOlderPoints": "",
205 - "removeOlderUnit": "3600",
206 - "cutout": 0,
207 - "useOneColor": false,
208 - "useUTC": false,
209 - "colors": [
210 - "#1f77b4",
211 - "#aec7e8",
212 - "#ff7f0e",
213 - "#2ca02c",
214 - "#98df8a",
215 - "#d62728",
216 - "#ff9896",
217 - "#9467bd",
218 - "#c5b0d5"
219 - ],
220 - "outputs": 1,
221 - "useDifferentColor": false,
222 - "className": "",
223 - "x": 950,
224 - "y": 200,
225 - "wires": [
226 - []
227 - ]
228 - },
229 - {
230 - "id": "fd22b92d2b8de0fb",
231 - "type": "ui_chart",
232 - "z": "5e07f5eeeb2a969b",
233 - "name": "",
234 - "group": "bb5657c2a8c290a3",
235 - "order": 1,
236 - "width": 0,
237 - "height": 0,
238 - "label": "BatV",
239 - "chartType": "line",
240 - "legend": "false",
241 - "xformat": "HH:mm:ss",
242 - "interpolate": "linear",
243 - "nodata": "",
244 - "dot": false,
245 - "ymin": "",
246 - "ymax": "",
247 - "removeOlder": 1,
248 - "removeOlderPoints": "",
249 - "removeOlderUnit": "3600",
250 - "cutout": 0,
251 - "useOneColor": false,
252 - "useUTC": false,
253 - "colors": [
254 - "#1f77b4",
255 - "#aec7e8",
256 - "#ff7f0e",
257 - "#2ca02c",
258 - "#98df8a",
259 - "#d62728",
260 - "#ff9896",
261 - "#9467bd",
262 - "#c5b0d5"
263 - ],
264 - "outputs": 1,
265 - "useDifferentColor": false,
266 - "className": "",
267 - "x": 930,
268 - "y": 120,
269 - "wires": [
270 - []
271 - ]
272 - },
273 - {
274 - "id": "c7d1f63ff5f0026a",
275 - "type": "ui_text",
276 - "z": "5e07f5eeeb2a969b",
277 - "group": "528e965cef294158",
278 - "order": 0,
279 - "width": "6",
280 - "height": "4",
281 - "name": "",
282 - "label": "Digital_IStatus",
283 - "format": "{{msg.payload}}",
284 - "layout": "col-center",
285 - "className": "",
286 - "x": 960,
287 - "y": 240,
288 - "wires": []
289 - },
290 - {
291 - "id": "159967056da52706",
292 - "type": "ui_text",
293 - "z": "5e07f5eeeb2a969b",
294 - "group": "5e615e3edb5999a0",
295 - "order": 0,
296 - "width": "6",
297 - "height": "4",
298 - "name": "",
299 - "label": "EXTI_Trigger",
300 - "format": "{{msg.payload}}",
301 - "layout": "col-center",
302 - "className": "",
303 - "x": 950,
304 - "y": 280,
305 - "wires": []
306 - },
307 - {
308 - "id": "7bb78b78445ac9e3",
309 - "type": "ui_chart",
310 - "z": "5e07f5eeeb2a969b",
311 - "name": "",
312 - "group": "5f7fec85295a7f7c",
313 - "order": 0,
314 - "width": 0,
315 - "height": 0,
316 - "label": "TempC_SHT",
317 - "chartType": "line",
318 - "legend": "false",
319 - "xformat": "HH:mm:ss",
320 - "interpolate": "linear",
321 - "nodata": "",
322 - "dot": false,
323 - "ymin": "",
324 - "ymax": "",
325 - "removeOlder": 1,
326 - "removeOlderPoints": "",
327 - "removeOlderUnit": "3600",
328 - "cutout": 0,
329 - "useOneColor": false,
330 - "useUTC": false,
331 - "colors": [
332 - "#1f77b4",
333 - "#aec7e8",
334 - "#ff7f0e",
335 - "#2ca02c",
336 - "#98df8a",
337 - "#d62728",
338 - "#ff9896",
339 - "#9467bd",
340 - "#c5b0d5"
341 - ],
342 - "outputs": 1,
343 - "useDifferentColor": false,
344 - "className": "",
345 - "x": 950,
346 - "y": 360,
347 - "wires": [
348 - []
349 - ]
350 - },
351 - {
352 - "id": "0364752170ed6228",
353 - "type": "ui_text",
354 - "z": "5e07f5eeeb2a969b",
355 - "group": "3cb616f18674c42a",
356 - "order": 0,
357 - "width": "6",
358 - "height": "4",
359 - "name": "",
360 - "label": "Work_mode",
361 - "format": "{{msg.payload}}",
362 - "layout": "col-center",
363 - "className": "",
364 - "x": 950,
365 - "y": 400,
366 - "wires": []
367 - },
368 - {
369 - "id": "65293155d71d54b9",
370 - "type": "ui_chart",
371 - "z": "5e07f5eeeb2a969b",
372 - "name": "",
373 - "group": "bb2e35e7a931c198",
374 - "order": 0,
375 - "width": 0,
376 - "height": 0,
377 - "label": "Hum_SHT",
378 - "chartType": "line",
379 - "legend": "false",
380 - "xformat": "HH:mm:ss",
381 - "interpolate": "linear",
382 - "nodata": "",
383 - "dot": false,
384 - "ymin": "",
385 - "ymax": "",
386 - "removeOlder": 1,
387 - "removeOlderPoints": "",
388 - "removeOlderUnit": "3600",
389 - "cutout": 0,
390 - "useOneColor": false,
391 - "useUTC": false,
392 - "colors": [
393 - "#1f77b4",
394 - "#aec7e8",
395 - "#ff7f0e",
396 - "#2ca02c",
397 - "#98df8a",
398 - "#d62728",
399 - "#ff9896",
400 - "#9467bd",
401 - "#c5b0d5"
402 - ],
403 - "outputs": 1,
404 - "useDifferentColor": false,
405 - "className": "",
406 - "x": 950,
407 - "y": 440,
408 - "wires": [
409 - []
410 - ]
411 - },
412 - {
413 - "id": "a21581a41adc1714",
414 - "type": "ui_text",
415 - "z": "5e07f5eeeb2a969b",
416 - "group": "9109ae41eee353df",
417 - "order": 0,
418 - "width": "6",
419 - "height": "4",
420 - "name": "",
421 - "label": "Door_status",
422 - "format": "{{msg.payload}}",
423 - "layout": "col-center",
424 - "className": "",
425 - "x": 950,
426 - "y": 320,
427 - "wires": []
428 - },
429 - {
430 - "id": "416a930e89291528",
431 - "type": "debug",
432 - "z": "5e07f5eeeb2a969b",
433 - "name": "debug 2",
434 - "active": true,
435 - "tosidebar": true,
436 - "console": false,
437 - "tostatus": false,
438 - "complete": "false",
439 - "statusVal": "",
440 - "statusType": "auto",
441 - "x": 660,
442 - "y": 60,
443 - "wires": []
444 - },
445 - {
446 - "id": "3601a98894805fbe",
447 - "type": "debug",
448 - "z": "5e07f5eeeb2a969b",
449 - "name": "debug 3",
450 - "active": true,
451 - "tosidebar": true,
452 - "console": false,
453 - "tostatus": false,
454 - "complete": "false",
455 - "statusVal": "",
456 - "statusType": "auto",
457 - "x": 380,
458 - "y": 240,
459 - "wires": []
460 - },
461 - {
462 - "id": "bb1c0e81fd51fa9e",
463 - "type": "serial-port",
464 - "serialport": "/dev/ttyUSB0",
465 - "serialbaud": "9600",
466 - "databits": "8",
467 - "parity": "none",
468 - "stopbits": "1",
469 - "waitfor": "",
470 - "dtr": "none",
471 - "rts": "none",
472 - "cts": "none",
473 - "dsr": "none",
474 - "newline": "\\n",
475 - "bin": "false",
476 - "out": "char",
477 - "addchar": "\\r\\n",
478 - "responsetimeout": "10000"
479 - },
480 - {
481 - "id": "c1fddd37879528e5",
482 - "type": "ui_group",
483 - "name": "BatV",
484 - "tab": "abb98f80600a5448",
485 - "order": 1,
486 - "disp": true,
487 - "width": "6",
488 - "collapse": false,
489 - "className": ""
490 - },
491 - {
492 - "id": "6d46fdae9f413f7b",
493 - "type": "ui_group",
494 - "name": "ADC_CH0V",
495 - "tab": "abb98f80600a5448",
496 - "order": 1,
497 - "disp": true,
498 - "width": "6",
499 - "collapse": false,
500 - "className": ""
501 - },
502 - {
503 - "id": "bb5657c2a8c290a3",
504 - "type": "ui_group",
505 - "name": "BatV",
506 - "tab": "abb98f80600a5448",
507 - "order": 3,
508 - "disp": true,
509 - "width": "6",
510 - "collapse": false,
511 - "className": ""
512 - },
513 - {
514 - "id": "528e965cef294158",
515 - "type": "ui_group",
516 - "name": "Digital_IStatus",
517 - "tab": "abb98f80600a5448",
518 - "order": 4,
519 - "disp": true,
520 - "width": "6",
521 - "collapse": false,
522 - "className": ""
523 - },
524 - {
525 - "id": "5e615e3edb5999a0",
526 - "type": "ui_group",
527 - "name": "EXTI_Trigger",
528 - "tab": "abb98f80600a5448",
529 - "order": 5,
530 - "disp": true,
531 - "width": "6",
532 - "collapse": false,
533 - "className": ""
534 - },
535 - {
536 - "id": "5f7fec85295a7f7c",
537 - "type": "ui_group",
538 - "name": "TempC_SHT",
539 - "tab": "abb98f80600a5448",
540 - "order": 6,
541 - "disp": true,
542 - "width": "6",
543 - "collapse": false,
544 - "className": ""
545 - },
546 - {
547 - "id": "3cb616f18674c42a",
548 - "type": "ui_group",
549 - "name": "Work_mode",
550 - "tab": "abb98f80600a5448",
551 - "order": 7,
552 - "disp": true,
553 - "width": "6",
554 - "collapse": false,
555 - "className": ""
556 - },
557 - {
558 - "id": "bb2e35e7a931c198",
559 - "type": "ui_group",
560 - "name": "Hum_SHT",
561 - "tab": "abb98f80600a5448",
562 - "order": 8,
563 - "disp": true,
564 - "width": "6",
565 - "collapse": false,
566 - "className": ""
567 - },
568 - {
569 - "id": "9109ae41eee353df",
570 - "type": "ui_group",
571 - "name": "Door_status",
572 - "tab": "abb98f80600a5448",
573 - "order": 9,
574 - "disp": true,
575 - "width": "6",
576 - "collapse": false,
577 - "className": ""
578 - },
579 - {
580 - "id": "abb98f80600a5448",
581 - "type": "ui_tab",
582 - "name": "LSN50v2 S31",
583 - "icon": "LSN50v2 S31",
584 - "disabled": false,
585 - "hidden": false
586 - }
587 -]
image-20230506113813-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -39.5 KB
Content
image-20230506113831-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -32.2 KB
Content
image-20230506114127-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.1 KB
Content
image-20230506115438-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -413.6 KB
Content
image-20230620103153-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -127.6 KB
Content
image-20230620103535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -156.3 KB
Content
image-20230620103923-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -72.7 KB
Content
image-20231014092843-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -596 bytes
Content
image-20231014092934-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -620 bytes
Content
image-20231014092954-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -618 bytes
Content
image-20231014092959-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -563 bytes
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0