Last modified by Kilight Cao on 2024/10/12 08:58
<
From version < 148.2 >
edited by Xiaoling
on 2023/12/15 10:28
To version < 102.1 >
edited by Edwin Chen
on 2022/11/14 19:41
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -7,39 +7,30 @@
7 7  
8 8  )))
9 9  
10 -**Table of Contents:**
10 +**Table of Contents：**
11 11  
12 12  {{toc/}}
13 13  
14 += **1. Introduction** =
14 14  
15 15  
17 +== **1.1 What is LG01-V2** ==
16 16  
17 17  
18 -
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LG01v2 ==
22 -
23 -
24 24  (((
25 25  (((
26 -The LG01v2 is an (% style="color:blue" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 -
28 -LG01v2 is specially designed for (% style="color:blue" %)**peer-to-peer LoRa**(%%) protocol instead of LoRaWAN protocol. The LG01v2 uses a single-channel LoRa module to minimize the deployment cost for a private p2p LoRa wireless network.
29 -
30 -(% style="color:red" %)**Note: The LG01v2 can't register and connect to the LoRaWAN server(Such as The Things NetWork, AWS, or Chirpstack..)**
22 +The LG01-V2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
31 31  )))
32 32  
33 33  (((
34 -LG01v2 uses Open Source Linux system. User can modify the Linux part and develop customize software base on it. It has (% style="color:blue" %)**1.2Ghz Quad-Core CPU**(%%) , (% style="color:blue" %)**4GB eMMC storage**(%%) and (% style="color:blue" %)**512MB RAM**(%%) for most application.
35 -
36 -LG01v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
26 +LG01-V2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
37 37  )))
38 38  
39 39  
40 -== 1.2 Specifications ==
41 41  
31 +== **1.2 Specifications** ==
42 42  
33 +
43 43  (% style="color:#037691" %)**Hardware System:**
44 44  
45 45  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -57,7 +57,7 @@
57 57  * Storage Temperature: -20 ~~ 65°C
58 58  * Power Input: 5V, 2A, DC
59 59  
60 -== 1.3 Features ==
51 +== **1.3 Features** ==
61 61  
62 62  
63 63  * Open Source Debian system
... ... @@ -65,59 +65,69 @@
65 65  * Remote Management
66 66  * Auto-provisioning for batch deployment and management
67 67  * LoRa Gateway
59 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
68 68  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
69 69  
70 -== 1.4 Block Diagram ==
62 +== **1.4 Block Diagram** ==
71 71  
72 72  
73 73  
74 -== 1.5 LED Indicators ==
66 +== **1.5 LED Indicators** ==
75 75  
76 76  
77 77  LG01-V2 has totally four LEDs, They are:
78 78  
79 79  
80 -(% style="color:blue" %)**➢ Power LED**[[image:image-20231014092959-4.png]](%%): This RED LED will be solid if the device is properly powered
72 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
81 81  
82 -(% style="color:blue" %)**➢ ETH LED**[[image:image-20231014092934-2.png]](%%):  This RGB LED will blink GREEN when the ETH port is connecting
74 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
83 83  
84 -(% style="color:blue" %)**➢ SYS LED**[[image:image-20231014092954-3.png]](%%):  Undefined yet. 
76 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
85 85  
86 -(% style="color:blue" %)**➢ WIFI LED**[[image:image-20231014092843-1.png]](%%): This LED shows the WIFI interface connection status.
78 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
87 87  
80 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
88 88  
89 -== 1.6 Button Intruction ==
82 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
90 90  
84 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
91 91  
86 +
87 +
88 +== **1.6 Button Intruction** ==
89 +
90 +
92 92  LG01-V2 has a black toggle button, which is:
93 93  
94 94  
95 -(% style="color:blue" %)**➢ Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
94 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
96 96  
97 - **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
96 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
98 98  
99 99  
100 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
99 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
101 101  
102 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
101 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
103 103  
104 104  
105 -= 2. Quick Start =
106 106  
105 += **2. Quick Start** =
107 107  
107 +
108 108  The LG01-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
109 109  
110 110  In most cases, the first thing you need to do is make the LG01-v2 accessible to the network.
111 111  
112 112  
113 -== 2.1 Access and Configure LG01-v2 ==
113 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
114 114  
115 -=== 2.1.1 Find IP address of LG01-v2 ===
116 116  
116 +== **2.1.1 connect the network.** ==
117 117  
118 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
119 119  
119 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
120 120  
121 +
121 121  Connect the LG01-V2 Ethernet port to your router and LG01-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01-V2.
122 122  
123 123  You can also use this IP to connect.
... ... @@ -125,38 +125,10 @@
125 125  
126 126  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100129-1.png?width=1263&height=332&rev=1.1||alt="image-20220622100129-1.png"]]
127 127  
128 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via LG01v2 Fallback IP ====
129 129  
130 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230107084650-2.png?width=839&height=310&rev=1.1||alt="image-20230107084650-2.png" height="284" width="769"]]
130 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
131 131  
132 132  
133 -**Steps to connect via fallback IP:**
134 -
135 -~1. Connect the PC's Ethernet port to LG01v2's WAN port
136 -
137 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
138 -
139 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
140 -
141 -
142 -As in the below photo:
143 -
144 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413172038-1.png?width=1243&height=732&rev=1.1||alt="image-20230413172038-1.png" height="624" width="1059"]]
145 -
146 -
147 -Configure computer Ethernet port steps video: **[[fallback ip.mp4>>url:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/fallback%20ip.mp4?rev=1.1]]**
148 -
149 -If you still can't access the LG01v2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/LG01v2/#H10.1A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
150 -
151 -3. In the PC, use IP address 172.31.255.254 to access the LG01v2 via Web or Console.
152 -
153 -[[image:image-20230506115438-13.png||height="554" width="1047"]]
154 -
155 -
156 -
157 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ====
158 -
159 -
160 160  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100542-2.png?width=1256&height=369&rev=1.1||alt="image-20220622100542-2.png"]]
161 161  
162 162  
... ... @@ -163,111 +163,74 @@
163 163  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
164 164  
165 165  
166 -[[image:image-20230506113332-2.png]]
139 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102702-6.png?rev=1.1||alt="image-20220622102702-6.png"]]
167 167  
168 168  
169 169  **Wi-Fi configuration successful**
170 170  
171 171  
172 -[[image:image-20230506113432-3.png||height="397" width="855"]]
145 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102847-7.png?rev=1.1||alt="image-20220622102847-7.png"]]
173 173  
174 174  
175 -=== 2.1.2 Access Configure Web UI ===
176 176  
149 += **3. Web Configure Pages** =
177 177  
178 -**Web Interface**
151 +== **3.1 Home** ==
179 179  
180 -Open a browser on the PC and type the LG01v2 ip address (depends on your connect method)
153 +//Shows the system running status~://
181 181  
155 +[[image:image-20221104155612-1.png||height="497" width="942"]]
182 182  
183 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
184 184  
185 -You will see the login interface of LG01v2 as shown below.
158 +== **3.2 Network Settings** ==
186 186  
187 -The account details for Web Login are:
188 188  
189 -(% style="color:#4f81bd" %)**User Name: root**
161 +=== **3.2.1 Network ~-~-> WiFi** ===
190 190  
191 -(% style="color:#4f81bd" %)**Password:   dragino**
192 192  
193 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230106153501-1.png?width=894&height=367&rev=1.1||alt="image-20230106153501-1.png"]]
164 +[[image:image-20221104155654-2.png||height="319" width="813"]]
194 194  
195 195  
196 -= 3. Web Configure Pages =
197 197  
198 -== 3.1 Home ==
168 +=== **3.4.2 Network ~-~-> System Status** ===
199 199  
200 200  
201 -Shows the system running status:
171 +[[image:image-20221104155724-3.png||height="679" width="861"]]
202 202  
203 -[[image:image-20230506113531-4.png||height="430" width="818"]]
204 204  
205 205  
206 -== 3.2 Network Settings ==
175 +=== **3.4.3 Network ~-~-> Firewall** ===
207 207  
208 -=== 3.2.1 Network ~-~-> WiFi ===
209 209  
178 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616115351-6.png?width=661&height=244&rev=1.1||alt="image-20220616115351-6.png"]]
210 210  
211 -[[image:image-20230506113602-5.png]]
212 212  
213 213  
214 -=== 3.4.2 Network ~-~-> System Status ===
182 +== **3.5 System** ==
215 215  
216 216  
217 -[[image:image-20230506113623-6.png||height="511" width="672"]]
185 +=== **3.5.1  System ~-~-> System Overview** ===
218 218  
219 219  
220 -== 3.5 System ==
221 -
222 -=== 3.5.1  System ~-~-> System Overview ===
223 -
224 -
225 225  Shows the system info:
226 226  
227 -[[image:image-20230506113705-7.png]]
190 +[[image:image-20221104155907-4.png]]
228 228  
229 229  
230 -=== 3.5.2 System ~-~-> Backup/Restore ===
231 231  
194 +=== **3.5.2 System ~-~-> Backup/Restore** ===
232 232  
233 -[[image:image-20230506113722-8.png||height="254" width="797"]]
234 234  
197 +[[image:image-20221104155928-5.png||height="334" width="880"]]
235 235  
236 -=== 3.5.3 System ~-~-> System General ===
237 237  
200 += (% id="cke_bm_1978S" style="display:none" %)** **(%%)**4. Build in Server** =
238 238  
239 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
240 240  
241 -In addition, Users can customize the FallBack IP address.
242 -
243 -[[image:image-20230506113813-10.png||height="659" width="749"]]
244 -
245 -
246 -=== 3.5.4 System ~-~-> Remoteit ===
247 -
248 -
249 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
250 -
251 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
252 -
253 -[[image:image-20230506113831-11.png||height="567" width="748"]]
254 -
255 -
256 -=== 3.5.5 System ~-~-> Package Management ===
257 -
258 -
259 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
260 -
261 -[[image:image-20230506114127-12.png||height="803" width="762"]]
262 -
263 -
264 -= (% id="cke_bm_1978S" style="display:none" %) (%%)4. Build in Server =
265 -
266 -
267 267  The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
268 268  
269 269  
270 -[[image:image-20230506113737-9.png]]
206 +[[image:image-20221104155949-6.png||height="315" width="1023"]]
271 271  
272 272  
273 273  (% style="color:red" %)**Note:**
... ... @@ -275,16 +275,18 @@
275 275   **Path**: System ~-~-> Built-in Server
276 276  
277 277  
278 -(% style="color:blue" %)**Troubleshooting：**
214 +**Troubleshooting:**
279 279  
216 +
280 280  **~ 1. URL does not jump properly**
281 281  
282 282   For the Node-Red, you can use the local IP address and the port is 1880 to access it.
283 283  
284 284  
285 -== 4.1 Application Server ~-~- Node-Red ==
286 286  
223 +== **4.1 Application Server ~-~- Node-Red** ==
287 287  
225 +
288 288  You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
289 289  
290 290  
... ... @@ -294,24 +294,12 @@
294 294  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
295 295  
296 296  
297 -= 5. How to configure the Lora Gateway =
235 += **5. How to configure the Lora Gateway** =
298 298  
299 -== 5.1 Configure and Debug LoRa wireless of LG01v2 ==
300 300  
238 +== **5.1 Configure and Debug LoRa wireless of LG01v2** ==
301 301  
302 -First, the user needs to access the Linux console of LG01v2 via ssh
303 303  
304 -**IP address:  (% style="color:blue" %)IP address of LG01v2(%%)**
305 -
306 -**Port:  (% style="color:blue" %)22(%%)**
307 -
308 -**User Name:   (% style="color:blue" %)root(%%)**
309 -
310 -**Password:  (% style="color:blue" %)dragino(default)(%%)**
311 -
312 -[[image:image-20230504100722-3.png||height="228" width="908"]]
313 -
314 -
315 315  Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**:
316 316  
317 317  (% class="box infomessage" %)
... ... @@ -332,9 +332,7 @@
332 332  )))
333 333  
334 334  
335 -(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**
336 -
337 -
261 +(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**(%%)
338 338  (% style="color:red" %)[[image:image-20221029174703-3.png]]
339 339  
340 340  
... ... @@ -343,27 +343,26 @@
343 343  
344 344  (% class="box infomessage" %)
345 345  (((
346 -**AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
347 -AT+GROUPMOD=0,0  ~-~-->  TX and RX group
348 -AT+BW=0,0  ~-~-->  TX and RX Bandwidth
349 -AT+SF=12,12  ~-~-->  TX and RX Spreading Factor
350 -AT+POWER=14  ~-~-->  TX Power Range
351 -AT+CRC=1,1  ~-~-->  TX and RX CRC Type
352 -AT+HEADER=0,0  ~-~-->  TX and RX Header Type
353 -AT+CR=1,1  ~-~-->  TX and RX Coding Rate
354 -AT+IQ=0,0  ~-~-->  TX and RX InvertIQ
355 -AT+PREAMBLE=8,8  ~-~-->  TX and RX Preamble Length
356 -AT+SYNCWORD=0  ~-~-->  Syncword(0: private，1: public)
357 -AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
358 -AT+RXDAFORM=1**                              
270 +AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
271 +AT+GROUPMOD=0,0  ~-~--> TX and RX group
272 +AT+BW=0,0  ~-~--> TX and RX Bandwidth
273 +AT+SF=12,12  ~-~--> TX and RX Spreading Factor
274 +AT+POWER=14  ~-~--> TX Power Range
275 +AT+CRC=1,1  ~-~--> TX and RX CRC Type
276 +AT+HEADER=0,0  ~-~--> TX and RX Header Type
277 +AT+CR=1,1  ~-~--> TX and RX Coding Rate
278 +AT+IQ=0,0  ~-~--> TX and RX InvertIQ
279 +AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length
280 +AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
281 +AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
282 +AT+RXDAFORM=1                              
359 359  )))
360 360  
361 361  
362 -== 5.2 Example: LG01v2 ==
286 +== **5.2 Example: LG01v2** ==
363 363  
364 -=== 5.2.1 Introduce for the example: ===
288 +=== **5.2.1 Introduce for the example:** ===
365 365  
366 -
367 367  [[image:image-20221104102736-3.png||height="282" width="723"]]
368 368  
369 369  
... ... @@ -377,7 +377,6 @@
377 377  
378 378  ==== **Set up LA66 Module** ====
379 379  
380 -
381 381  LA66 Module is loaded with the firmware **[[LA66 Peer-to-Peer firmware>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]] **and user can use AT Command to set up LA66 with below parameters:
382 382  
383 383  (((
... ... @@ -402,13 +402,10 @@
402 402  )))
403 403  
404 404  
405 -
406 406  ==== **Set up Arduino UNO** ====
407 407  
408 -(% id="cke_bm_1033249S" style="display:none" %)** **
329 +(% id="cke_bm_1033249S" style="display:none" %)** **(%%)**Hardware Connection**
409 409  
410 -**Hardware Connection**
411 -
412 412  (% class="box infomessage" %)
413 413  (((
414 414  **The DHT11 sensor connects to the LA66 Shield:**
... ... @@ -421,17 +421,13 @@
421 421  [[image:image-20221108170731-5.png||height="588" width="441"]]
422 422  
423 423  
424 -
425 425  ===== **1. Open Arduino IDE** =====
426 426  
427 -
428 428  [[image:image-20221108172149-6.png||height="650" width="542"]]
429 429  
430 430  
431 -
432 432  ===== **2. Open project** =====
433 433  
434 -
435 435  Users can download Arduino files from this link: [[attach:Log-Temperature-Sensor-and-send-data-to-Node-red.ino||target="_blank"]]
436 436  
437 437  Then click Compile and Upload to LA66 Shield,
... ... @@ -439,21 +439,19 @@
439 439  [[image:image-20221108172432-7.png]]
440 440  
441 441  
442 -
443 443  ===== **3. Open the Serial Monitor to check the LA66 Shield data** =====
444 444  
445 -
446 446  The UNO will now reads the temperature and humidity data from the sensor and broadcast it via LoRa wireless,
447 447  
448 448  [[image:image-20221108174840-8.png||height="731" width="671"]]
449 449  
450 450  
451 -
452 452  Sending out data as below.
453 453  
454 454  [[image:image-20221108175113-9.png||height="556" width="998"]]
455 455  
456 456  
369 +
457 457  === 5.2.3 Set Up LG01v2 ===
458 458  
459 459  
... ... @@ -475,13 +475,12 @@
475 475  AT+IQ=0,0  ~-~--> TX and RX InvertIQ
476 476  AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
477 477  AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
478 -AT+RXMOD=65535,2  ~-~-->  Rx Timeout and Reply mode, RX window always open**(0:No ACK, 1:Reply mode, 2:Send an ACK once got a message from another device. ACK Content is 0x00 FF )**
391 +AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode, RX window always open
479 479  )))
480 480  
481 481  
482 482  === 5.2.4 Test result ===
483 483  
484 -
485 485  After the above configuration is complete, users can send test simulation data to check whether the configuration is correct, In LA66 sheild serial console send:(% style="color:red" %)**(AT+SEND=1,hello world,2,3).**
486 486  )))
487 487  
... ... @@ -490,18 +490,17 @@
490 490  [[image:image-20221108164413-2.png]]
491 491  
492 492  
493 -
494 494  In the real-time log of LG01v2：
495 495  
496 496  [[image:image-20221108170314-3.png]]
497 497  
498 498  
499 -=== 5.2.5 Plot data chart in LG01v2 ===
410 +=== **5.2.5 Plot data chart in LG01v2** ===
500 500  
501 501  
502 502  User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
503 503  
504 -User can import this example in Node-Red: [[attach:Log-Temperature-Sensor-and-send-data-to-Node-red.json||target="_blank"]]
415 +User can import this example in Node-Red: [[attach:Log-Temperature-Sensor-and-send-data-to-node-red.json||target="_blank"]]
505 505  
506 506  [[image:image-20221108180334-10.png||height="651" width="1141"]]
507 507  
... ... @@ -513,26 +513,52 @@
513 513  [[image:image-20221108180458-11.png||height="402" width="1137"]]
514 514  
515 515  
427 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**v(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
516 516  
517 -= 6. OTA System Update =
518 518  
430 +(% style="color:blue" %)**USB TTL to LG01-V2  Connection:**
519 519  
520 -LG01v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
521 521  
433 +Port 1 of the UART on the LG01-V2 is GND
522 522  
523 -= 7. FAQ =
435 +(% class="box infomessage" %)
436 +(((
437 +**TXD  <~-~--> UART RXD (Gray line)**
524 524  
525 -== 7.1 How does LG01v2 communicate with Lora shield (LoRa.h) ==
439 +**RXD  <~-~--> UART TXD (White line)**
526 526  
441 +**GND <~-~--> GND (Black line)**
442 +)))
527 527  
528 -This example describes how to use LG01v2, LoRa Shield to set up a LoRa network,
529 529  
445 +**LG01-V2 UART connection photo**
446 +
447 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
448 +
449 +
450 +
451 +In the PC, you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LG01v2. LG01v2 will output system info once power on as below:
452 +
453 +
454 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
455 +
456 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
457 +
458 +
459 += **7. FAQ** =
460 +
461 +
462 +== **7.1 How does LG01-V2 communicate with Lora shield (LoRa.h)** ==
463 +
464 +
465 +This example describes how to use LG01-V2, LoRa Shield to set up a LoRa network,
466 +
530 530  [[image:image-20221103152238-8.png||height="251" width="654"]]
531 531  
532 532  
533 -(% style="color:red" %)**Prerequisites: The configurations of LG01v2 and Lora shield must match**
470 +(% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
534 534  
535 -**LG01v2 configuration:**
472 +**LG01-V2 configuration:**
536 536  
537 537  (% class="box infomessage" %)
538 538  (((
... ... @@ -550,8 +550,6 @@
550 550  AT+RXDAFORM=1    
551 551  )))
552 552  
553 -
554 -
555 555  **Lora shield configuration:**
556 556  
557 557  Lora Shield example: [[attach:LoRa_Shield_Sketch_For_MQTT.ino||target="_blank"]] , [[attach:arduino-LoRa-master.zip||target="_blank"]]
... ... @@ -559,30 +559,27 @@
559 559  [[image:image-20221101161318-2.png]]
560 560  
561 561  
497 +**Test LG01-V2 to receive Lora Shield data:**
562 562  
563 -**Test LG01v2 to receive Lora Shield data:**
564 -
565 565  [[image:image-20221101161951-3.png]]
566 566  
567 567  
502 +**Test the LG01-V2 to send data:**
568 568  
569 -**Test the LG01v2 to send data:**
570 -
571 571  [[image:image-20221101162527-4.png]]
572 572  
573 573  
574 -== 7.2 How does LG01v2 communicate with Heltec LoRa Node ==
507 +== **7.2 How does LG01-V2 communicate with Heltec LoRa Node** ==
575 575  
576 576  
577 -This example describes how to use LG01v2 and Heltec LoRa Node to set up a LoRa network,
510 +This example describes how to use LG01-V2 and Heltec LoRa Node to set up a LoRa network,
578 578  
579 579  [[image:image-20221112161111-2.png||height="258" width="692"]]
580 580  
581 -(% style="color:red" %)**Prerequisites: The configurations of LG01v2 and Lora shield must match**
514 +(% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
582 582  
516 +**LG01-V2 configuration:**
583 583  
584 -**LG01v2 configuration:**
585 -
586 586  (% class="box infomessage" %)
587 587  (((
588 588  AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
... ... @@ -599,7 +599,6 @@
599 599  AT+RXDAFORM=1  ~-~--> RX data format**（0: Hex ,1: String）**
600 600  )))
601 601  
602 -
603 603  After we upload the sketch to Heltec LoRa Node, we can see below output from Arduino.
604 604  
605 605  Lora Shield example: [[attach:LoRa_send_trial.ino||target="_blank"]]
... ... @@ -611,143 +611,55 @@
611 611  
612 612  [[image:image-20221112163119-4.png||height="808" width="560"]]
613 613  
545 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
614 614  
615 -== 7.3 How does LG01v2 communicate with LoRaWAN node ==
616 616  
617 -
618 -This example describes how to use LG01v2 and LSN50 to set up a  network,
619 -
620 -In this case, users need to set LSN50 to work in ABP mode and transmit in only one frequency.
621 -
622 -Assume we have a LG01v2 working in the frequency 868100000 now, below is the steps.
623 -
624 -
625 -**Step1: **Configure the LG01v2
626 -
627 -(% class="box infomessage" %)
628 628  (((
629 -AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
630 -AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
631 -AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
632 -AT+SYNCWORD=1  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
549 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
633 633  )))
634 634  
635 -**Step2:  **Run AT commands to make the LSN50 work in Single frequency and ABP mode. Below are the AT commands:
636 -
637 -(% class="box infomessage" %)
638 638  (((
639 -AT+FDR  ~-~--> Reset Parameters to Factory Default, Keys Reserve
640 -AT+NJM=0  ~-~-->  Set to ABP mode
641 -AT+ADR=0  ~-~-->  Set the Adaptive Data Rate Off
642 -AT+DR=0  ~-~--> Set Data Rate (Set AT+DR=3 for 915 band)
643 -AT+TDC=300000  ~-~-->  Set transmit interval to 5 minutes
644 -AT+CHS=868100000  ~-~--> Set transmit frequency to 868.1Mhz
645 -AT+DADDR=FFFFF111  ~-~--> Set Device Address to 26 01 1A F1
646 -ATZ  ~-~--> Reset MCU
647 -)))
553 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
648 648  
649 -**Step3:  **Check result
650 650  
651 651  
557 += **9. Reference** =
652 652  
653 -User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
654 654  
655 -User can import this example in Node-Red: [[attach:LG01v2_LSN50v2_S31.json||target="_blank"]]
560 +* Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
561 +* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
656 656  
657 -
658 -First the user needs to fill in the NwkSkey and AppSkey in the LoraWan Packet Decrypter node.
659 -
660 -[[image:image-20230620103535-2.png||height="591" width="1138"]]
661 -
662 -[[image:image-20230620103153-1.png||height="610" width="1141"]]
663 -
664 -
665 -The data will be displayed in the built-in node-red UI
666 -
667 -**Browser input: (% style="background-color:yellow" %)__//http:~/~/<local-IPV4-address>//__(%%)**
668 -
669 -[[image:image-20230620103923-3.png||height="476" width="1138"]]
670 -
671 -
672 -== 7.4 How can users factory reset LG01v2 ==
673 -
674 -
675 -Users can download the image of LG01v2 from this link：[[dragino-lg01v2-1.7-0210>>https://www.dropbox.com/scl/fi/g0si61lcrvdjyto4ma951/dragino-lg01v2-1.7-0210.zip?rlkey=t03oqo493r2p7ign488rs2jsv&dl=0]]
676 -
677 -
678 -Then follow the steps in the link below to restore factory Settings to LG01v2：
679 -
680 -[[How to flash a new image(OS) to the gateway>>url:https://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
681 -
682 -
683 -= 8. Trouble Shooting =
684 -
685 -== 8.1  Fallback IP does not work, how can users check ==
686 -
687 -
688 -When the computer has completed the above fallback IP configuration,the LG01v2 Web UI is still not accessible via fallback IP.
689 -
690 -
691 -**1.Check whether the configuration is correct**
692 -
693 -Run the CMD command to ipconfig and ping 172.31.255.254.
694 -
695 -If this fails, the user needs to reconfigure.
696 -
697 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413170224-3.png?width=707&height=433&rev=1.1||alt="image-20230413170224-3.png"]]
698 -
699 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413170246-4.png?rev=1.1||alt="image-20230413170246-4.png"]]
700 -
701 -
702 -**2. Check whether the firewall is disabled**
703 -
704 -If the firewall is not down, this will affect access to the gateway.
705 -
706 -
707 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
708 -
709 -
710 -(((
711 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
712 -)))
713 -
714 -(((
715 -With your question as detailed as possible. We will reply and help you in the shortest.
716 -
717 -
718 -= 10. Reference =
719 -
720 -
721 -* Install Tago Core: Refer **Install Tago Core in LG01v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
722 -
723 -* [[Advance OS Reference Guide for L>>doc:Main.Armbian OS instruction.WebHome]]G01v2.
724 -
725 725  
726 726  )))
727 727  
728 -= 11. Order Info =
566 += **10. Order Info** =
729 729  
730 730  
731 -(% style="color:#0000ff" %)**LG01v2-XXX-YYY**
569 +(% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
732 732  
733 733  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
734 734  
735 -* (% style="color:red" %)**868**(%%): For frequency : 863 ~~ 870Mhz
736 -* (% style="color:red" %)**915**(%%): For frequency : 902 ~~ 928Mhz
573 +* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
574 +* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
575 +* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
576 +* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
577 +* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
578 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
737 737  
738 738  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
739 739  
740 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
741 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America: Verizon, AT&T(FirstNet), U.S.Cellular; Canada: Telus
742 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
743 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
582 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
583 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
584 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
585 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
744 744  
745 745  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
746 746  
747 747  
748 -= 12. Manufacturer Info =
749 749  
591 += **10. Manufacturer Info** =
750 750  
593 +
751 751  **Shenzhen Dragino Technology Development co. LTD**
752 752  
753 753  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -755,9 +755,10 @@
755 755  LongCheng Street, LongGang District ; Shenzhen 518116,China
756 756  
757 757  
758 -= 13. FCC Warning =
759 759  
602 += **11. FCC Warning** =
760 760  
604 +
761 761  (((
762 762  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
763 763  )))
... ... @@ -787,6 +787,7 @@
787 787  (((
788 788  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
789 789  
790 -
791 791  
792 792  )))
636 +
637 +~)~)~)
LG01v2_LSN50v2_S31.json
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -16.5 KB
Content
... ... @@ -1,587 +1,0 @@
1 -[
2 - {
3 - "id": "5e07f5eeeb2a969b",
4 - "type": "tab",
5 - "label": "流程 1",
6 - "disabled": false,
7 - "info": "",
8 - "env": []
9 - },
10 - {
11 - "id": "9c26fa2f19e2b556",
12 - "type": "function",
13 - "z": "5e07f5eeeb2a969b",
14 - "name": "hex to base64",
15 - "func": "var input = msg.payload;\nvar base64 = Buffer.from(input, 'hex').toString('base64');\nmsg.payload = base64;\nreturn msg;",
16 - "outputs": 1,
17 - "noerr": 0,
18 - "initialize": "",
19 - "finalize": "",
20 - "libs": [],
21 - "x": 220,
22 - "y": 160,
23 - "wires": [
24 - [
25 - "075bc9172a4c6570",
26 - "3601a98894805fbe"
27 - ]
28 - ]
29 - },
30 - {
31 - "id": "ee0480c81e66d657",
32 - "type": "function",
33 - "z": "5e07f5eeeb2a969b",
34 - "name": "function 4",
35 - "func": "var bytes = msg.payload[\"uplink_message\"]\nvar data = msg.payload[\"out\"]\nvar mode = (parseInt(data.substring(12, 14), 16) & 0x7C) >> 2;\nif (mode != 2)\n{\nvar bat = (parseInt(data.substring(0,4),16)&0x3FFF)/1000;\nvar TempC1 = (parseFloat(parseInt(data.substring(4, 8),16)/10).toFixed(2));\nvar ADC_CH0V = (parseInt(data.substring(8, 12), 16) ) / 1000;\nvar Digital_IStatus = (parseInt((data.substring(8, 12),16) & 0x02))?\"H\":\"L\"; \n\nif (mode != 6) {\n\n var EXTI_Trigger = ((parseInt(data.substring(12, 14), 16) & 0x01))? \"TRUE\" : \"FALSE\";\n\n var Door_status = ((parseInt(data.substring(12, 14), 16) & 0x80))? \"CLOSE\" : \"OPEN\";\n\n}\n}\nif (mode == 0) {\n\n var Work_mode = \"IIC\";\n\n if ((parseInt(data.substring(18, 22), 16)) == 0){\n\n var Illum = (parseInt(data.substring(8, 12), 16));\n\n }\n\n else {\n\n var TempC_SHT = parseFloat(((parseInt(data.substring(14, 18), 16)) / 10).toFixed(2));\n\n var Hum_SHT = parseFloat((((parseInt(data.substring(18, 22), 16))) / 10).toFixed(1));\n\n }\n \n}\n\nelse if (mode == 1) {\n\n var Work_mode = \" Distance\";\n\n var Distance_cm = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(1));\n\n if (((parseInt(data.substring(18, 22), 16))) != 65535){\n\n var Distance_signal_strength = parseFloat(((parseInt(data.substring(18, 22), 16))).toFixed(0));\n\n }\n\n}\n\nelse if (mode == 2) {\n\n var Work_mode = \" 3ADC\";\n\n var BatV = (parseInt(data.substring(18, 22), 16)) / 10;\n\n var ADC_CH0V = ((parseInt(data.substring(0, 4), 16))) / 1000;\n\n var ADC_CH1V = ((parseInt(data.substring(4, 8), 16))) / 1000;\n\n var ADC_CH4V = ((parseInt(data.substring(8, 12), 16))) / 1000;\n\n var Digital_IStatus = ((parseInt(data.substring(12, 14), 16)) & 0x02) ? \"H\" : \"L\";\n\n var EXTI_Trigger = ((parseInt(data.substring(12, 14), 16)) & 0x01) ? \"TRUE\" : \"FALSE\";\n\n var Door_status = ((parseInt(data.substring(13, 14), 16)) & 0x80) ? \"CLOSE\" : \"OPEN\";\n\n if ((parseInt(data.substring(18, 22), 16) === 0)) {\n\n var Illum = ((parseInt(data.substring(14, 18), 16)));\n\n }\n\n else {\n\n var TempC_SHT = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(2));\n\n var Hum_SHT = parseFloat((((parseInt(data.substring(18, 24), 16))) / 10).toFixed(1));\n\n }\n\n}\n\nelse if (mode == 3) {\n\n var Work_mode = \"3DS18B20\";\n\n var TempC2 = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(2));\n\n var TempC3 = parseFloat((((parseInt(data.substring(18, 24), 16))) / 10).toFixed(1));\n\n\n\n}\n\nelse if (mode == 4) {\n\n var Work_mode = \"Weight\";\n\n var Weight = ((parseInt(data.substring(14, 18), 16)));\n\n}\n\nelse if (mode == 5) {\n\n var Work_mode = \"Count\";\n\n var Count = ((parseInt(data.substring(14, 22), 16)));\n\n}\n\n\n\nvar b = { payload: bat }, c = { payload: TempC1 }, d = { payload: ADC_CH0V }, e = { payload: Digital_IStatus }, f = { payload: EXTI_Trigger }, g = { payload: Door_status }, j = { payload: TempC_SHT }, s = { payload: Hum_SHT }, k = { payload: Work_mode };\nreturn [b,c,d,e,f,g,j,k,s];",
36 - "outputs": 9,
37 - "noerr": 0,
38 - "initialize": "",
39 - "finalize": "",
40 - "libs": [],
41 - "x": 660,
42 - "y": 300,
43 - "wires": [
44 - [
45 - "fd22b92d2b8de0fb"
46 - ],
47 - [
48 - "3307256a4e1ea53a"
49 - ],
50 - [
51 - "a3fd8302ec399e31"
52 - ],
53 - [
54 - "c7d1f63ff5f0026a"
55 - ],
56 - [
57 - "159967056da52706"
58 - ],
59 - [
60 - "a21581a41adc1714"
61 - ],
62 - [
63 - "7bb78b78445ac9e3"
64 - ],
65 - [
66 - "0364752170ed6228"
67 - ],
68 - [
69 - "65293155d71d54b9"
70 - ]
71 - ]
72 - },
73 - {
74 - "id": "e763b293d42dbdd5",
75 - "type": "change",
76 - "z": "5e07f5eeeb2a969b",
77 - "name": "",
78 - "rules": [
79 - {
80 - "t": "change",
81 - "p": "payload",
82 - "pt": "msg",
83 - "from": "Data: (HEX:)",
84 - "fromt": "str",
85 - "to": "",
86 - "tot": "str"
87 - },
88 - {
89 - "t": "change",
90 - "p": "payload",
91 - "pt": "msg",
92 - "from": " ",
93 - "fromt": "str",
94 - "to": "",
95 - "tot": "str"
96 - }
97 - ],
98 - "action": "",
99 - "property": "",
100 - "from": "",
101 - "to": "",
102 - "reg": false,
103 - "x": 420,
104 - "y": 60,
105 - "wires": [
106 - [
107 - "9c26fa2f19e2b556",
108 - "416a930e89291528"
109 - ]
110 - ]
111 - },
112 - {
113 - "id": "075bc9172a4c6570",
114 - "type": "lorawan-packet-decrypt-nwkey-appkey",
115 - "z": "5e07f5eeeb2a969b",
116 - "name": "FFFFF111",
117 - "nsw": "CCFFFFFFFFFFFFFFFFFFFFFFFFFFFFAA",
118 - "asw": "FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCC",
119 - "x": 510,
120 - "y": 160,
121 - "wires": [
122 - [
123 - "ee0480c81e66d657"
124 - ]
125 - ]
126 - },
127 - {
128 - "id": "13dc77a4e2bb4f72",
129 - "type": "serial in",
130 - "z": "5e07f5eeeb2a969b",
131 - "name": "",
132 - "serial": "bb1c0e81fd51fa9e",
133 - "x": 190,
134 - "y": 60,
135 - "wires": [
136 - [
137 - "e763b293d42dbdd5"
138 - ]
139 - ]
140 - },
141 - {
142 - "id": "3307256a4e1ea53a",
143 - "type": "ui_chart",
144 - "z": "5e07f5eeeb2a969b",
145 - "name": "",
146 - "group": "c1fddd37879528e5",
147 - "order": 1,
148 - "width": 0,
149 - "height": 0,
150 - "label": "TempC1",
151 - "chartType": "line",
152 - "legend": "false",
153 - "xformat": "HH:mm:ss",
154 - "interpolate": "linear",
155 - "nodata": "",
156 - "dot": false,
157 - "ymin": "",
158 - "ymax": "",
159 - "removeOlder": 1,
160 - "removeOlderPoints": "",
161 - "removeOlderUnit": "3600",
162 - "cutout": 0,
163 - "useOneColor": false,
164 - "useUTC": false,
165 - "colors": [
166 - "#1f77b4",
167 - "#aec7e8",
168 - "#ff7f0e",
169 - "#2ca02c",
170 - "#98df8a",
171 - "#d62728",
172 - "#ff9896",
173 - "#9467bd",
174 - "#c5b0d5"
175 - ],
176 - "outputs": 1,
177 - "useDifferentColor": false,
178 - "className": "",
179 - "x": 940,
180 - "y": 160,
181 - "wires": [
182 - []
183 - ]
184 - },
185 - {
186 - "id": "a3fd8302ec399e31",
187 - "type": "ui_chart",
188 - "z": "5e07f5eeeb2a969b",
189 - "name": "",
190 - "group": "6d46fdae9f413f7b",
191 - "order": 1,
192 - "width": 0,
193 - "height": 0,
194 - "label": "ADC_CH0V",
195 - "chartType": "line",
196 - "legend": "false",
197 - "xformat": "HH:mm:ss",
198 - "interpolate": "linear",
199 - "nodata": "",
200 - "dot": false,
201 - "ymin": "",
202 - "ymax": "",
203 - "removeOlder": 1,
204 - "removeOlderPoints": "",
205 - "removeOlderUnit": "3600",
206 - "cutout": 0,
207 - "useOneColor": false,
208 - "useUTC": false,
209 - "colors": [
210 - "#1f77b4",
211 - "#aec7e8",
212 - "#ff7f0e",
213 - "#2ca02c",
214 - "#98df8a",
215 - "#d62728",
216 - "#ff9896",
217 - "#9467bd",
218 - "#c5b0d5"
219 - ],
220 - "outputs": 1,
221 - "useDifferentColor": false,
222 - "className": "",
223 - "x": 950,
224 - "y": 200,
225 - "wires": [
226 - []
227 - ]
228 - },
229 - {
230 - "id": "fd22b92d2b8de0fb",
231 - "type": "ui_chart",
232 - "z": "5e07f5eeeb2a969b",
233 - "name": "",
234 - "group": "bb5657c2a8c290a3",
235 - "order": 1,
236 - "width": 0,
237 - "height": 0,
238 - "label": "BatV",
239 - "chartType": "line",
240 - "legend": "false",
241 - "xformat": "HH:mm:ss",
242 - "interpolate": "linear",
243 - "nodata": "",
244 - "dot": false,
245 - "ymin": "",
246 - "ymax": "",
247 - "removeOlder": 1,
248 - "removeOlderPoints": "",
249 - "removeOlderUnit": "3600",
250 - "cutout": 0,
251 - "useOneColor": false,
252 - "useUTC": false,
253 - "colors": [
254 - "#1f77b4",
255 - "#aec7e8",
256 - "#ff7f0e",
257 - "#2ca02c",
258 - "#98df8a",
259 - "#d62728",
260 - "#ff9896",
261 - "#9467bd",
262 - "#c5b0d5"
263 - ],
264 - "outputs": 1,
265 - "useDifferentColor": false,
266 - "className": "",
267 - "x": 930,
268 - "y": 120,
269 - "wires": [
270 - []
271 - ]
272 - },
273 - {
274 - "id": "c7d1f63ff5f0026a",
275 - "type": "ui_text",
276 - "z": "5e07f5eeeb2a969b",
277 - "group": "528e965cef294158",
278 - "order": 0,
279 - "width": "6",
280 - "height": "4",
281 - "name": "",
282 - "label": "Digital_IStatus",
283 - "format": "{{msg.payload}}",
284 - "layout": "col-center",
285 - "className": "",
286 - "x": 960,
287 - "y": 240,
288 - "wires": []
289 - },
290 - {
291 - "id": "159967056da52706",
292 - "type": "ui_text",
293 - "z": "5e07f5eeeb2a969b",
294 - "group": "5e615e3edb5999a0",
295 - "order": 0,
296 - "width": "6",
297 - "height": "4",
298 - "name": "",
299 - "label": "EXTI_Trigger",
300 - "format": "{{msg.payload}}",
301 - "layout": "col-center",
302 - "className": "",
303 - "x": 950,
304 - "y": 280,
305 - "wires": []
306 - },
307 - {
308 - "id": "7bb78b78445ac9e3",
309 - "type": "ui_chart",
310 - "z": "5e07f5eeeb2a969b",
311 - "name": "",
312 - "group": "5f7fec85295a7f7c",
313 - "order": 0,
314 - "width": 0,
315 - "height": 0,
316 - "label": "TempC_SHT",
317 - "chartType": "line",
318 - "legend": "false",
319 - "xformat": "HH:mm:ss",
320 - "interpolate": "linear",
321 - "nodata": "",
322 - "dot": false,
323 - "ymin": "",
324 - "ymax": "",
325 - "removeOlder": 1,
326 - "removeOlderPoints": "",
327 - "removeOlderUnit": "3600",
328 - "cutout": 0,
329 - "useOneColor": false,
330 - "useUTC": false,
331 - "colors": [
332 - "#1f77b4",
333 - "#aec7e8",
334 - "#ff7f0e",
335 - "#2ca02c",
336 - "#98df8a",
337 - "#d62728",
338 - "#ff9896",
339 - "#9467bd",
340 - "#c5b0d5"
341 - ],
342 - "outputs": 1,
343 - "useDifferentColor": false,
344 - "className": "",
345 - "x": 950,
346 - "y": 360,
347 - "wires": [
348 - []
349 - ]
350 - },
351 - {
352 - "id": "0364752170ed6228",
353 - "type": "ui_text",
354 - "z": "5e07f5eeeb2a969b",
355 - "group": "3cb616f18674c42a",
356 - "order": 0,
357 - "width": "6",
358 - "height": "4",
359 - "name": "",
360 - "label": "Work_mode",
361 - "format": "{{msg.payload}}",
362 - "layout": "col-center",
363 - "className": "",
364 - "x": 950,
365 - "y": 400,
366 - "wires": []
367 - },
368 - {
369 - "id": "65293155d71d54b9",
370 - "type": "ui_chart",
371 - "z": "5e07f5eeeb2a969b",
372 - "name": "",
373 - "group": "bb2e35e7a931c198",
374 - "order": 0,
375 - "width": 0,
376 - "height": 0,
377 - "label": "Hum_SHT",
378 - "chartType": "line",
379 - "legend": "false",
380 - "xformat": "HH:mm:ss",
381 - "interpolate": "linear",
382 - "nodata": "",
383 - "dot": false,
384 - "ymin": "",
385 - "ymax": "",
386 - "removeOlder": 1,
387 - "removeOlderPoints": "",
388 - "removeOlderUnit": "3600",
389 - "cutout": 0,
390 - "useOneColor": false,
391 - "useUTC": false,
392 - "colors": [
393 - "#1f77b4",
394 - "#aec7e8",
395 - "#ff7f0e",
396 - "#2ca02c",
397 - "#98df8a",
398 - "#d62728",
399 - "#ff9896",
400 - "#9467bd",
401 - "#c5b0d5"
402 - ],
403 - "outputs": 1,
404 - "useDifferentColor": false,
405 - "className": "",
406 - "x": 950,
407 - "y": 440,
408 - "wires": [
409 - []
410 - ]
411 - },
412 - {
413 - "id": "a21581a41adc1714",
414 - "type": "ui_text",
415 - "z": "5e07f5eeeb2a969b",
416 - "group": "9109ae41eee353df",
417 - "order": 0,
418 - "width": "6",
419 - "height": "4",
420 - "name": "",
421 - "label": "Door_status",
422 - "format": "{{msg.payload}}",
423 - "layout": "col-center",
424 - "className": "",
425 - "x": 950,
426 - "y": 320,
427 - "wires": []
428 - },
429 - {
430 - "id": "416a930e89291528",
431 - "type": "debug",
432 - "z": "5e07f5eeeb2a969b",
433 - "name": "debug 2",
434 - "active": true,
435 - "tosidebar": true,
436 - "console": false,
437 - "tostatus": false,
438 - "complete": "false",
439 - "statusVal": "",
440 - "statusType": "auto",
441 - "x": 660,
442 - "y": 60,
443 - "wires": []
444 - },
445 - {
446 - "id": "3601a98894805fbe",
447 - "type": "debug",
448 - "z": "5e07f5eeeb2a969b",
449 - "name": "debug 3",
450 - "active": true,
451 - "tosidebar": true,
452 - "console": false,
453 - "tostatus": false,
454 - "complete": "false",
455 - "statusVal": "",
456 - "statusType": "auto",
457 - "x": 380,
458 - "y": 240,
459 - "wires": []
460 - },
461 - {
462 - "id": "bb1c0e81fd51fa9e",
463 - "type": "serial-port",
464 - "serialport": "/dev/ttyUSB0",
465 - "serialbaud": "9600",
466 - "databits": "8",
467 - "parity": "none",
468 - "stopbits": "1",
469 - "waitfor": "",
470 - "dtr": "none",
471 - "rts": "none",
472 - "cts": "none",
473 - "dsr": "none",
474 - "newline": "\\n",
475 - "bin": "false",
476 - "out": "char",
477 - "addchar": "\\r\\n",
478 - "responsetimeout": "10000"
479 - },
480 - {
481 - "id": "c1fddd37879528e5",
482 - "type": "ui_group",
483 - "name": "BatV",
484 - "tab": "abb98f80600a5448",
485 - "order": 1,
486 - "disp": true,
487 - "width": "6",
488 - "collapse": false,
489 - "className": ""
490 - },
491 - {
492 - "id": "6d46fdae9f413f7b",
493 - "type": "ui_group",
494 - "name": "ADC_CH0V",
495 - "tab": "abb98f80600a5448",
496 - "order": 1,
497 - "disp": true,
498 - "width": "6",
499 - "collapse": false,
500 - "className": ""
501 - },
502 - {
503 - "id": "bb5657c2a8c290a3",
504 - "type": "ui_group",
505 - "name": "BatV",
506 - "tab": "abb98f80600a5448",
507 - "order": 3,
508 - "disp": true,
509 - "width": "6",
510 - "collapse": false,
511 - "className": ""
512 - },
513 - {
514 - "id": "528e965cef294158",
515 - "type": "ui_group",
516 - "name": "Digital_IStatus",
517 - "tab": "abb98f80600a5448",
518 - "order": 4,
519 - "disp": true,
520 - "width": "6",
521 - "collapse": false,
522 - "className": ""
523 - },
524 - {
525 - "id": "5e615e3edb5999a0",
526 - "type": "ui_group",
527 - "name": "EXTI_Trigger",
528 - "tab": "abb98f80600a5448",
529 - "order": 5,
530 - "disp": true,
531 - "width": "6",
532 - "collapse": false,
533 - "className": ""
534 - },
535 - {
536 - "id": "5f7fec85295a7f7c",
537 - "type": "ui_group",
538 - "name": "TempC_SHT",
539 - "tab": "abb98f80600a5448",
540 - "order": 6,
541 - "disp": true,
542 - "width": "6",
543 - "collapse": false,
544 - "className": ""
545 - },
546 - {
547 - "id": "3cb616f18674c42a",
548 - "type": "ui_group",
549 - "name": "Work_mode",
550 - "tab": "abb98f80600a5448",
551 - "order": 7,
552 - "disp": true,
553 - "width": "6",
554 - "collapse": false,
555 - "className": ""
556 - },
557 - {
558 - "id": "bb2e35e7a931c198",
559 - "type": "ui_group",
560 - "name": "Hum_SHT",
561 - "tab": "abb98f80600a5448",
562 - "order": 8,
563 - "disp": true,
564 - "width": "6",
565 - "collapse": false,
566 - "className": ""
567 - },
568 - {
569 - "id": "9109ae41eee353df",
570 - "type": "ui_group",
571 - "name": "Door_status",
572 - "tab": "abb98f80600a5448",
573 - "order": 9,
574 - "disp": true,
575 - "width": "6",
576 - "collapse": false,
577 - "className": ""
578 - },
579 - {
580 - "id": "abb98f80600a5448",
581 - "type": "ui_tab",
582 - "name": "LSN50v2 S31",
583 - "icon": "LSN50v2 S31",
584 - "disabled": false,
585 - "hidden": false
586 - }
587 -]
Log-Temperature-Sensor-and-send-data-to-Node-red.json
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.3 KB
Content
... ... @@ -1,443 +1,0 @@
1 -[
2 - {
3 - "id": "0a211e08511c4bdd",
4 - "type": "tab",
5 - "label": "serial USB",
6 - "disabled": false,
7 - "info": "",
8 - "env": []
9 - },
10 - {
11 - "id": "4a97eeb54bf57a6d",
12 - "type": "serial in",
13 - "z": "0a211e08511c4bdd",
14 - "name": "",
15 - "serial": "bb1c0e81fd51fa9e",
16 - "x": 210,
17 - "y": 60,
18 - "wires": [
19 - [
20 - "d2493fb9752dbcab",
21 - "d183c255973c979e"
22 - ]
23 - ]
24 - },
25 - {
26 - "id": "12f1eeb8049675c1",
27 - "type": "inject",
28 - "z": "0a211e08511c4bdd",
29 - "name": "AT+SEND=1,hello world,0,3",
30 - "props": [
31 - {
32 - "p": "payload"
33 - }
34 - ],
35 - "repeat": "",
36 - "crontab": "",
37 - "once": false,
38 - "onceDelay": 0.1,
39 - "topic": "",
40 - "payload": "AT+SEND=1,hello world,0,3",
41 - "payloadType": "str",
42 - "x": 220,
43 - "y": 260,
44 - "wires": [
45 - [
46 - "a5d2f5df63a2148e"
47 - ]
48 - ]
49 - },
50 - {
51 - "id": "a5d2f5df63a2148e",
52 - "type": "serial out",
53 - "z": "0a211e08511c4bdd",
54 - "name": "",
55 - "serial": "bb1c0e81fd51fa9e",
56 - "x": 540,
57 - "y": 260,
58 - "wires": []
59 - },
60 - {
61 - "id": "dc04c04a0bc0e5db",
62 - "type": "inject",
63 - "z": "0a211e08511c4bdd",
64 - "name": "",
65 - "props": [
66 - {
67 - "p": "payload"
68 - }
69 - ],
70 - "repeat": "",
71 - "crontab": "",
72 - "once": false,
73 - "onceDelay": 0.1,
74 - "topic": "",
75 - "payload": "ATZ",
76 - "payloadType": "str",
77 - "x": 290,
78 - "y": 320,
79 - "wires": [
80 - [
81 - "a5d2f5df63a2148e"
82 - ]
83 - ]
84 - },
85 - {
86 - "id": "3de96a220e28e8f0",
87 - "type": "inject",
88 - "z": "0a211e08511c4bdd",
89 - "name": "AT+FRE",
90 - "props": [
91 - {
92 - "p": "payload"
93 - }
94 - ],
95 - "repeat": "",
96 - "crontab": "",
97 - "once": false,
98 - "onceDelay": 0.1,
99 - "topic": "",
100 - "payload": "AT+FRE=868.100,868.100",
101 - "payloadType": "str",
102 - "x": 280,
103 - "y": 380,
104 - "wires": [
105 - [
106 - "a5d2f5df63a2148e"
107 - ]
108 - ]
109 - },
110 - {
111 - "id": "638725a47a1e4365",
112 - "type": "inject",
113 - "z": "0a211e08511c4bdd",
114 - "name": "AT+BW",
115 - "props": [
116 - {
117 - "p": "payload"
118 - }
119 - ],
120 - "repeat": "",
121 - "crontab": "",
122 - "once": false,
123 - "onceDelay": 0.1,
124 - "topic": "",
125 - "payload": "AT+BW=0,0",
126 - "payloadType": "str",
127 - "x": 290,
128 - "y": 440,
129 - "wires": [
130 - [
131 - "a5d2f5df63a2148e"
132 - ]
133 - ]
134 - },
135 - {
136 - "id": "85ba9868d1f3e82c",
137 - "type": "inject",
138 - "z": "0a211e08511c4bdd",
139 - "name": "AT+SF",
140 - "props": [
141 - {
142 - "p": "payload"
143 - }
144 - ],
145 - "repeat": "",
146 - "crontab": "",
147 - "once": false,
148 - "onceDelay": 0.1,
149 - "topic": "",
150 - "payload": "AT+SF=12,12",
151 - "payloadType": "str",
152 - "x": 290,
153 - "y": 500,
154 - "wires": [
155 - [
156 - "a5d2f5df63a2148e"
157 - ]
158 - ]
159 - },
160 - {
161 - "id": "144b2749013ffe57",
162 - "type": "inject",
163 - "z": "0a211e08511c4bdd",
164 - "name": "AT+RXMOD",
165 - "props": [
166 - {
167 - "p": "payload"
168 - }
169 - ],
170 - "repeat": "",
171 - "crontab": "",
172 - "once": false,
173 - "onceDelay": 0.1,
174 - "topic": "",
175 - "payload": "AT+RXMOD=65535,2",
176 - "payloadType": "str",
177 - "x": 270,
178 - "y": 560,
179 - "wires": [
180 - [
181 - "a5d2f5df63a2148e"
182 - ]
183 - ]
184 - },
185 - {
186 - "id": "bfb2e9df89dc5e2f",
187 - "type": "inject",
188 - "z": "0a211e08511c4bdd",
189 - "name": "AT+SYNCWORD",
190 - "props": [
191 - {
192 - "p": "payload"
193 - }
194 - ],
195 - "repeat": "",
196 - "crontab": "",
197 - "once": false,
198 - "onceDelay": 0.1,
199 - "topic": "",
200 - "payload": "AT+SYNCWORD=0",
201 - "payloadType": "str",
202 - "x": 260,
203 - "y": 620,
204 - "wires": [
205 - [
206 - "a5d2f5df63a2148e"
207 - ]
208 - ]
209 - },
210 - {
211 - "id": "d2493fb9752dbcab",
212 - "type": "function",
213 - "z": "0a211e08511c4bdd",
214 - "name": "function 1",
215 - "func": "var data = msg.payload\nif (data.substring(0, 4) == \"Data\") {\n if (data.substring(6, 12) == \"(HEX:)\") {\n var temp = data.substring(13, 15) + data.substring(16, 18)\n var hum = data.substring(19, 21) + data.substring(22, 24)\n var temp1 = parseInt(temp, 16) / 100\n var hum1 = parseInt(hum, 16) / 10\n var a1 = { payload: temp1 }, a2 = { payload: hum1 }\n }\n if (data.substring(6, 15) == \"(String:)\") {\n var temp = data.substring(20, 24)\n var hum = data.substring(29, 34)\n a1 = { payload: temp }, a2 = { payload: hum }\n }\n}\nif (data.substring(0, 4) == \"Rssi\") {\n var rssi = data.substring(6)\n var a3 = { payload: rssi }\n}\nreturn [a1, a2, a3];",
216 - "outputs": 3,
217 - "noerr": 0,
218 - "initialize": "",
219 - "finalize": "",
220 - "libs": [],
221 - "x": 420,
222 - "y": 60,
223 - "wires": [
224 - [
225 - "c17d94be4317ae6c"
226 - ],
227 - [
228 - "20c5b1c7f42fa6bb"
229 - ],
230 - [
231 - "39a8462f3d748eef"
232 - ]
233 - ]
234 - },
235 - {
236 - "id": "39a8462f3d748eef",
237 - "type": "ui_chart",
238 - "z": "0a211e08511c4bdd",
239 - "name": "",
240 - "group": "ef41b39771110fa5",
241 - "order": 1,
242 - "width": 0,
243 - "height": 0,
244 - "label": "RSSI",
245 - "chartType": "line",
246 - "legend": "false",
247 - "xformat": "dd HH:mm",
248 - "interpolate": "linear",
249 - "nodata": "",
250 - "dot": true,
251 - "ymin": "",
252 - "ymax": "",
253 - "removeOlder": 1,
254 - "removeOlderPoints": "",
255 - "removeOlderUnit": "3600",
256 - "cutout": 0,
257 - "useOneColor": false,
258 - "useUTC": false,
259 - "colors": [
260 - "#1f77b4",
261 - "#aec7e8",
262 - "#ff7f0e",
263 - "#2ca02c",
264 - "#98df8a",
265 - "#d62728",
266 - "#ff9896",
267 - "#9467bd",
268 - "#c5b0d5"
269 - ],
270 - "outputs": 1,
271 - "useDifferentColor": false,
272 - "className": "",
273 - "x": 670,
274 - "y": 180,
275 - "wires": [
276 - []
277 - ]
278 - },
279 - {
280 - "id": "c17d94be4317ae6c",
281 - "type": "ui_chart",
282 - "z": "0a211e08511c4bdd",
283 - "name": "",
284 - "group": "7e1d1c102cf74e6b",
285 - "order": 1,
286 - "width": 0,
287 - "height": 0,
288 - "label": "Temperature",
289 - "chartType": "line",
290 - "legend": "false",
291 - "xformat": "HH:mm:ss",
292 - "interpolate": "linear",
293 - "nodata": "",
294 - "dot": true,
295 - "ymin": "",
296 - "ymax": "",
297 - "removeOlder": 1,
298 - "removeOlderPoints": "",
299 - "removeOlderUnit": "3600",
300 - "cutout": 0,
301 - "useOneColor": false,
302 - "useUTC": false,
303 - "colors": [
304 - "#1f77b4",
305 - "#aec7e8",
306 - "#ff7f0e",
307 - "#2ca02c",
308 - "#98df8a",
309 - "#d62728",
310 - "#ff9896",
311 - "#9467bd",
312 - "#c5b0d5"
313 - ],
314 - "outputs": 1,
315 - "useDifferentColor": false,
316 - "className": "",
317 - "x": 690,
318 - "y": 100,
319 - "wires": [
320 - []
321 - ]
322 - },
323 - {
324 - "id": "20c5b1c7f42fa6bb",
325 - "type": "ui_chart",
326 - "z": "0a211e08511c4bdd",
327 - "name": "",
328 - "group": "3f5d139f158d7c1c",
329 - "order": 2,
330 - "width": 0,
331 - "height": 0,
332 - "label": "Humidity",
333 - "chartType": "line",
334 - "legend": "false",
335 - "xformat": "HH:mm:ss",
336 - "interpolate": "linear",
337 - "nodata": "",
338 - "dot": true,
339 - "ymin": "",
340 - "ymax": "",
341 - "removeOlder": 1,
342 - "removeOlderPoints": "",
343 - "removeOlderUnit": "3600",
344 - "cutout": 0,
345 - "useOneColor": false,
346 - "useUTC": false,
347 - "colors": [
348 - "#1f77b4",
349 - "#aec7e8",
350 - "#ff7f0e",
351 - "#2ca02c",
352 - "#98df8a",
353 - "#d62728",
354 - "#ff9896",
355 - "#9467bd",
356 - "#c5b0d5"
357 - ],
358 - "outputs": 1,
359 - "useDifferentColor": false,
360 - "className": "",
361 - "x": 680,
362 - "y": 140,
363 - "wires": [
364 - []
365 - ]
366 - },
367 - {
368 - "id": "d183c255973c979e",
369 - "type": "debug",
370 - "z": "0a211e08511c4bdd",
371 - "name": "debug 1",
372 - "active": true,
373 - "tosidebar": true,
374 - "console": false,
375 - "tostatus": false,
376 - "complete": "false",
377 - "statusVal": "",
378 - "statusType": "auto",
379 - "x": 420,
380 - "y": 180,
381 - "wires": []
382 - },
383 - {
384 - "id": "bb1c0e81fd51fa9e",
385 - "type": "serial-port",
386 - "serialport": "/dev/ttyUSB0",
387 - "serialbaud": "9600",
388 - "databits": "8",
389 - "parity": "none",
390 - "stopbits": "1",
391 - "waitfor": "",
392 - "dtr": "none",
393 - "rts": "none",
394 - "cts": "none",
395 - "dsr": "none",
396 - "newline": "\\n",
397 - "bin": "false",
398 - "out": "char",
399 - "addchar": "\\r\\n",
400 - "responsetimeout": "10000"
401 - },
402 - {
403 - "id": "ef41b39771110fa5",
404 - "type": "ui_group",
405 - "name": "rssi",
406 - "tab": "abb98f80600a5448",
407 - "order": 3,
408 - "disp": true,
409 - "width": "6",
410 - "collapse": false,
411 - "className": ""
412 - },
413 - {
414 - "id": "7e1d1c102cf74e6b",
415 - "type": "ui_group",
416 - "name": "TEM",
417 - "tab": "abb98f80600a5448",
418 - "order": 4,
419 - "disp": true,
420 - "width": "6",
421 - "collapse": false,
422 - "className": ""
423 - },
424 - {
425 - "id": "3f5d139f158d7c1c",
426 - "type": "ui_group",
427 - "name": "HUM",
428 - "tab": "abb98f80600a5448",
429 - "order": 2,
430 - "disp": true,
431 - "width": "6",
432 - "collapse": false,
433 - "className": ""
434 - },
435 - {
436 - "id": "abb98f80600a5448",
437 - "type": "ui_tab",
438 - "name": "LG01v2",
439 - "icon": "LG01v2",
440 - "disabled": false,
441 - "hidden": false
442 - }
443 -]
image-20230504095457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -412.6 KB
Content
image-20230504095502-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -412.6 KB
Content
image-20230504100722-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.5 KB
Content
image-20230506110646-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -383.1 KB
Content
image-20230506113332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20230506113432-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -36.5 KB
Content
image-20230506113531-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -403.2 KB
Content
image-20230506113602-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -26.7 KB
Content
image-20230506113623-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.4 KB
Content
image-20230506113705-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -40.9 KB
Content
image-20230506113722-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.2 KB
Content
image-20230506113737-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20230506113813-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -39.5 KB
Content
image-20230506113831-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -32.2 KB
Content
image-20230506114127-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.1 KB
Content
image-20230506115438-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -413.6 KB
Content
image-20230620103153-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -127.6 KB
Content
image-20230620103535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -156.3 KB
Content
image-20230620103923-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -72.7 KB
Content
image-20231014092843-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -596 bytes
Content
image-20231014092934-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -620 bytes
Content
image-20231014092954-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -618 bytes
Content
image-20231014092959-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -563 bytes
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0