Summary

• Page properties (1 modified, 0 added, 0 removed)
• Attachments (0 modified, 0 added, 44 removed)
  • LG01v2_LSN50v2_S31.json
  • LoRa_send_trial.ino
  • Log-Temperature-Sensor-and-send-data-to-Node-red.ino
  • Log-Temperature-Sensor-and-send-data-to-Node-red.json
  • Log-Temperature-Sensor-and-send-data-to-node-red.json
  • image-20221104155949-6.png
  • image-20221108164337-1.png
  • image-20221108164413-2.png
  • image-20221108170314-3.png
  • image-20221108170621-4.jpeg
  • image-20221108170731-5.png
  • image-20221108172149-6.png
  • image-20221108172432-7.png
  • image-20221108174840-8.png
  • image-20221108175113-9.png
  • image-20221108180334-10.png
  • image-20221108180458-11.png
  • image-20221112161031-1.png
  • image-20221112161111-2.png
  • image-20221112162733-3.png
  • image-20221112163119-4.png
  • image-20230504095457-1.png
  • image-20230504095502-2.png
  • image-20230504100722-3.png
  • image-20230506110646-1.png
  • image-20230506113332-2.png
  • image-20230506113432-3.png
  • image-20230506113531-4.png
  • image-20230506113602-5.png
  • image-20230506113623-6.png
  • image-20230506113705-7.png
  • image-20230506113722-8.png
  • image-20230506113737-9.png
  • image-20230506113813-10.png
  • image-20230506113831-11.png
  • image-20230506114127-12.png
  • image-20230506115438-13.png
  • image-20230620103153-1.png
  • image-20230620103535-2.png
  • image-20230620103923-3.png
  • image-20231014092843-1.png
  • image-20231014092934-2.png
  • image-20231014092954-3.png
  • image-20231014092959-4.png

Details

Page properties

Content

...	...	@@ -11,33 +11,26 @@
11	11
12	12	{{toc/}}
13	13
	14	+= **1. Introduction** =
14	14
15	15
	17	+== **1.1 What is LG01-V2** ==
16	16
17	17
18		-
19		-= 1. Introduction =
20		-
21		-== 1.1 What is LG01v2 ==
22		-
23		-
24	24	(((
25	25	(((
26		-The LG01v2 is an (% style="color:blue" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27		-
28		-LG01v2 is specially design for (% style="color:blue" %)**peer to peer LoRa**(%%) protocol instead of LoRaWAN protocol. The LG01v2 use single channel LoRa module to minimize the deployment cost for a private p2p LoRa wireless network.
	22	+The LG01-V2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
29	29	)))
30	30
31	31	(((
32		-LG01v2 uses Open Source Linux system. User can modify the Linux part and develop customize software base on it. It has (% style="color:blue" %)**1.2Ghz Quad-Core CPU**(%%) , (% style="color:blue" %)**4GB eMMC storage**(%%) and (% style="color:blue" %)**512MB RAM**(%%) for most application.
33		-
34		-LG01v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
	26	+LG01-V2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
35	35	)))
36	36
37	37
38		-== 1.2 Specifications ==
39	39
	31	+== **1.2 Specifications** ==
40	40
	33	+
41	41	(% style="color:#037691" %)**Hardware System:**
42	42
43	43	* CPU: Quad-core Cortex-A7 1.2Ghz
...	...	@@ -55,7 +55,7 @@
55	55	* Storage Temperature: -20 ~~ 65°C
56	56	* Power Input: 5V, 2A, DC
57	57
58		-== 1.3 Features ==
	51	+== **1.3 Features** ==
59	59
60	60
61	61	* Open Source Debian system
...	...	@@ -63,65 +63,69 @@
63	63	* Remote Management
64	64	* Auto-provisioning for batch deployment and management
65	65	* LoRa Gateway
	59	+* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
66	66	* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
67	67
68		-== 1.4 Block Diagram ==
	62	+== **1.4 Block Diagram** ==
69	69
70	70
71	71
72		-== 1.5 LED Indicators ==
	66	+== **1.5 LED Indicators** ==
73	73
74	74
75	75	LG01-V2 has totally four LEDs, They are:
76	76
77	77
78		-(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
	72	+(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
79	79
80		-(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
	74	+(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
81	81
82		-(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
	76	+(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
83	83
84		- ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
	78	+// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
85	85
86		- ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
	80	+// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
87	87
88		- ✓** SOLID RED:** Device doesn't have an Internet connection.
	82	+// ✓** SOLID RED:** Device doesn't have an Internet connection.//
89	89
90		-(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
	84	+(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
91	91
92	92
93		-== 1.6 Button Intruction ==
94	94
	88	+== **1.6 Button Intruction** ==
95	95
	90	+
96	96	LG01-V2 has a black toggle button, which is:
97	97
98	98
99		-(% style="color:blue" %)**➢ Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
	94	+(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
100	100
101		- **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
	96	+ // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
102	102
103	103
104		-(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
	99	+(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
105	105
106		- **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
	101	+ //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
107	107
108	108
109		-= 2. Quick Start =
110	110
	105	+= **2. Quick Start** =
111	111
	107	+
112	112	The LG01-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
113	113
114	114	In most cases, the first thing you need to do is make the LG01-v2 accessible to the network.
115	115
116	116
117		-== 2.1 Access and Configure LG01-v2 ==
	113	+== **2.1 Connects to the network and accesses the gateway Web UI** ==
118	118
119		-=== 2.1.1 Find IP address of LG01-v2 ===
120	120
	116	+== **2.1.1 connect the network.** ==
121	121
122		-==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
123	123
	119	+=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
124	124
	121	+
125	125	Connect the LG01-V2 Ethernet port to your router and LG01-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01-V2.
126	126
127	127	You can also use this IP to connect.
...	...	@@ -129,149 +129,103 @@
129	129
130	130	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100129-1.png?width=1263&height=332&rev=1.1||alt="image-20220622100129-1.png"]]
131	131
132		-==== (% style="color:blue" %)**Method 2**(%%):  Connect via LG01v2 Fallback IP ====
133	133
134		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230107084650-2.png?width=839&height=310&rev=1.1||alt="image-20230107084650-2.png" height="284" width="769"]]
	130	+=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
135	135
136	136
137		-**Steps to connect via fallback IP:**
	133	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100542-2.png?width=1256&height=369&rev=1.1||alt="image-20220622100542-2.png"]]
138	138
139		-~1. Connect the PC's Ethernet port to LG01v2's WAN port
	135	+The LG01-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
140	140
141		-2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
142	142
143		-**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
	138	+(% style="color:#037691" %)**Steps to connect via fallback IP:**
144	144
	140	+~1. Connect PC's Ethernet port to LG01-V2's WAN port
145	145
146		-As in the below photo:
	142	+2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
147	147
148		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413172038-1.png?width=1243&height=732&rev=1.1||alt="image-20230413172038-1.png" height="624" width="1059"]]
149	149
	145	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622101433-4.png?rev=1.1||alt="image-20220622101433-4.png"]]
150	150
151		-Configure computer Ethernet port steps video: **[[fallback ip.mp4>>url:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/fallback%20ip.mp4?rev=1.1]]**
152	152
153		-If you still can't access the LG01v2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/LG01v2/#H10.1A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
	148	+and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LG01-V2 via Web or Console.
154	154
155		-3. In the PC, use IP address 172.31.255.254 to access the LG01v2 via Web or Console.
156	156
157		-[[image:image-20230506115438-13.png||height="554" width="1047"]]
	151	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102210-5.png?width=919&height=504&rev=1.1||alt="image-20220622102210-5.png"]]
158	158
159	159
160		-
161		-==== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ====
162		-
163		-
164		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100542-2.png?width=1256&height=369&rev=1.1||alt="image-20220622100542-2.png"]]
165		-
166		-
167	167	Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
168	168
169	169
170		-[[image:image-20230506113332-2.png]]
	157	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102702-6.png?rev=1.1||alt="image-20220622102702-6.png"]]
171	171
172	172
173	173	**Wi-Fi configuration successful**
174	174
175	175
176		-[[image:image-20230506113432-3.png||height="397" width="855"]]
	163	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102847-7.png?rev=1.1||alt="image-20220622102847-7.png"]]
177	177
	165	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?width=938&height=476&rev=1.1||alt="image-20220622102901-8.png"]]
178	178
179		-=== 2.1.2 Access Configure Web UI ===
180	180
	168	+= **3. Web Configure Pages** =
181	181
182		-**Web Interface**
	170	+== **3.1 Home** ==
183	183
184		-Open a browser on the PC and type the LG01v2 ip address (depends on your connect method)
	172	+//Shows the system running status~://
185	185
	174	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
186	186
187		-[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
188	188
189		-You will see the login interface of LG01v2 as shown below.
	177	+== **3.2 Network Settings** ==
190	190
191		-The account details for Web Login are:
192	192
193		-(% style="color:#4f81bd" %)**User Name: root**
	180	+=== **3.2.1 Network ~-~-> WiFi** ===
194	194
195		-(% style="color:#4f81bd" %)**Password:   dragino**
196	196
197		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230106153501-1.png?width=894&height=367&rev=1.1||alt="image-20230106153501-1.png"]]
	183	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616114756-4.png?width=669&height=251&rev=1.1||alt="image-20220616114756-4.png"]]
198	198
199	199
200		-= 3. Web Configure Pages =
201	201
202		-== 3.1 Home ==
	187	+=== **3.4.2 Network ~-~-> System Status** ===
203	203
204	204
205		-Shows the system running status:
	190	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820134112-2.png?width=668&height=539&rev=1.1||alt="image-20220820134112-2.png"]]
206	206
207		-[[image:image-20230506113531-4.png||height="430" width="818"]]
208	208
209	209
210		-== 3.2 Network Settings ==
	194	+=== **3.4.3 Network ~-~-> Firewall** ===
211	211
212		-=== 3.2.1 Network ~-~-> WiFi ===
213	213
	197	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616115351-6.png?width=661&height=244&rev=1.1||alt="image-20220616115351-6.png"]]
214	214
215		-[[image:image-20230506113602-5.png]]
216	216
217	217
218		-=== 3.4.2 Network ~-~-> System Status ===
	201	+== **3.5 System** ==
219	219
220	220
221		-[[image:image-20230506113623-6.png||height="511" width="672"]]
	204	+=== **3.5.1  System ~-~-> System Overview** ===
222	222
223	223
224		-== 3.5 System ==
225		-
226		-=== 3.5.1  System ~-~-> System Overview ===
227		-
228		-
229	229	Shows the system info:
230	230
231		-[[image:image-20230506113705-7.png]]
	209	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220917144512-5.png?width=853&height=618&rev=1.1||alt="image-20220917144512-5.png"]]
232	232
233	233
234		-=== 3.5.2 System ~-~-> Backup/Restore ===
235	235
	213	+=== **3.5.2 System ~-~-> Backup/Restore** ===
236	236
237		-[[image:image-20230506113722-8.png||height="254" width="797"]]
238	238
	216	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220917144725-6.png?width=869&height=208&rev=1.1||alt="image-20220917144725-6.png"]]
239	239
240		-=== 3.5.3 System ~-~-> System General ===
241	241
	219	+= (% id="cke_bm_1978S" style="display:none" %)** **(%%)**4. Build in Server** =
242	242
243		-In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
244	244
245		-In addition, Users can customize the FallBack IP address.
246		-
247		-[[image:image-20230506113813-10.png||height="659" width="749"]]
248		-
249		-
250		-=== 3.5.4 System ~-~-> Remoteit ===
251		-
252		-
253		-In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
254		-
255		-the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
256		-
257		-[[image:image-20230506113831-11.png||height="567" width="748"]]
258		-
259		-
260		-=== 3.5.5 System ~-~-> Package Management ===
261		-
262		-
263		-In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
264		-
265		-[[image:image-20230506114127-12.png||height="803" width="762"]]
266		-
267		-
268		-= (% id="cke_bm_1978S" style="display:none" %) (%%)4. Build in Server =
269		-
270		-
271	271	The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
272	272
273	273
274		-[[image:image-20230506113737-9.png]]
	225	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820115644-1.png?width=778&height=217&rev=1.1||alt="image-20220820115644-1.png"]]
275	275
276	276
277	277	(% style="color:red" %)**Note:**
...	...	@@ -279,16 +279,18 @@
279	279	**Path**: System ~-~-> Built-in Server
280	280
281	281
282		-(% style="color:blue" %)**Troubleshooting：**
	233	+**Troubleshooting:**
283	283
	235	+
284	284	**~ 1. URL does not jump properly**
285	285
286	286	For the Node-Red, you can use the local IP address and the port is 1880 to access it.
287	287
288	288
289		-== 4.1 Application Server ~-~- Node-Red ==
290	290
	242	+== **4.1 Application Server ~-~- Node-Red** ==
291	291
	244	+
292	292	You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
293	293
294	294
...	...	@@ -298,24 +298,12 @@
298	298	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
299	299
300	300
301		-= 5. How to configure the Lora Gateway =
	254	+= **5. How to configure the Lora Gateway** =
302	302
303		-== 5.1 Configure and Debug LoRa wireless of LG01v2 ==
304	304
	257	+== **5.1 Access the Lora configuration page** ==
305	305
306		-First, the user needs to access the Linux console of LG01v2 via ssh
307	307
308		-**IP address:  (% style="color:blue" %)IP address of LG01v2(%%)**
309		-
310		-**Port:  (% style="color:blue" %)22(%%)**
311		-
312		-**User Name:   (% style="color:blue" %)root(%%)**
313		-
314		-**Password:  (% style="color:blue" %)dragino(default)(%%)**
315		-
316		-[[image:image-20230504100722-3.png||height="228" width="908"]]
317		-
318		-
319	319	Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**:
320	320
321	321	(% class="box infomessage" %)
...	...	@@ -336,9 +336,7 @@
336	336	)))
337	337
338	338
339		-(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**
340		-
341		-
	280	+(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**(%%)
342	342	(% style="color:red" %)[[image:image-20221029174703-3.png]]
343	343
344	344
...	...	@@ -347,196 +347,98 @@
347	347
348	348	(% class="box infomessage" %)
349	349	(((
350		-**AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
351		-AT+GROUPMOD=0,0  ~-~-->  TX and RX group
352		-AT+BW=0,0  ~-~-->  TX and RX Bandwidth
353		-AT+SF=12,12  ~-~-->  TX and RX Spreading Factor
354		-AT+POWER=14  ~-~-->  TX Power Range
355		-AT+CRC=1,1  ~-~-->  TX and RX CRC Type
356		-AT+HEADER=0,0  ~-~-->  TX and RX Header Type
357		-AT+CR=1,1  ~-~-->  TX and RX Coding Rate
358		-AT+IQ=0,0  ~-~-->  TX and RX InvertIQ
359		-AT+PREAMBLE=8,8  ~-~-->  TX and RX Preamble Length
360		-AT+SYNCWORD=0  ~-~-->  Syncword(0: private，1: public)
361		-AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
362		-AT+RXDAFORM=1**
363		-)))
364		-
365		-
366		-== 5.2 Example: LG01v2 ==
367		-
368		-=== 5.2.1 Introduce for the example: ===
369		-
370		-
371		-[[image:image-20221104102736-3.png||height="282" width="723"]]
372		-
373		-
374		-In this example, there are two devices:
375		-
376		-* **LA66 Shield + UNO + DHT11**: The UNO will get the temperature and humidity and broadcast the value via LoRa protocol.
377		-* **LG01v2** : LG01v2 is set to listening the LoRa Channel which LA66 is broadcasting. When LG01v2 get the data from LA66, LG01v2 will plot the data in built-in IoT server.
378		-
379		-=== 5.2.2 Set Up LA66 Shield + UNO ===
380		-
381		-
382		-==== **Set up LA66 Module** ====
383		-
384		-
385		-LA66 Module is loaded with the firmware **[[LA66 Peer-to-Peer firmware>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]] **and user can use AT Command to set up LA66 with below parameters:
386		-
387		-(((
388		-(% style="color:red" %)**LA66 Shield as Sender: **
389		-
390		-(% class="box infomessage" %)
391		-(((
392		-**LA66 Shield configuration:**
393		-
394		-AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
395		-AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
396		-AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
397		-AT+POWER=14  ~-~--> TX Power Range set: 14dBm
	289	+AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
	290	+AT+GROUPMOD=0,0  ~-~--> TX and RX group
	291	+AT+BW=0,0  ~-~--> TX and RX Bandwidth
	292	+AT+SF=12,12  ~-~--> TX and RX Spreading Factor
	293	+AT+POWER=14  ~-~--> TX Power Range
398	398	AT+CRC=1,1  ~-~--> TX and RX CRC Type
399	399	AT+HEADER=0,0  ~-~--> TX and RX Header Type
400	400	AT+CR=1,1  ~-~--> TX and RX Coding Rate
401	401	AT+IQ=0,0  ~-~--> TX and RX InvertIQ
402		-AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
	298	+AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length
403	403	AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
404		-AT+RXMOD=6,0  ~-~-->  Rx Timeout and Reply mode
	300	+AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
	301	+AT+RXDAFORM=1
405	405	)))
406		-)))
407	407
408	408
	305	+== **5.2 Example: LG01**-**V2 Peer-to-Peer** ==
409	409
410		-==== **Set up Arduino UNO** ====
411	411
412		-(% id="cke_bm_1033249S" style="display:none" %)** **
	308	+[[image:image-20221104102736-3.png||height="282" width="723"]]
413	413
414		-**Hardware Connection**
415	415
416		-(% class="box infomessage" %)
417		-(((
418		-**The DHT11 sensor connects to the LA66 Shield:**
	311	+The user can run the AT command to set the LG01-V2 RX window always open as a Receiver, the LA66 Shield uses **AT+SEND=1,hello world,2,3** to simulate sending data,
419	419
420		-**VCC  <~-~--> 3.3V (Red line)**
421		-**DATA <~-~--> PIN8 (Purple line)**
422		-**GND  <~-~--> GND (White line)**
423		-)))
	313	+**Prerequisites: **The configuration of LG01-V2 and  LA66 Shield must match, users can use **AT+CFG** to check all configurations.
424	424
425		-[[image:image-20221108170731-5.png||height="588" width="441"]]
426	426
	316	+(% style="color:red; font-weight:bold" %)**LG01-V**(% style="color:red" %)**2 as Receiver: (configured as AT+RXMOD=65535,2)**
427	427
	318	+[[image:image-20221102140053-4.png]]
428	428
429		-===== **1. Open Arduino IDE** =====
430	430
	321	+(% style="color:red" %)**LA66 Shield as Sender: (AT+SEND=1,hello world,2,3)**
431	431
432		-[[image:image-20221108172149-6.png||height="650" width="542"]]
	323	+[[image:1667456058832-484.png||height="291" width="353"]]
433	433
434	434
	326	+Instruction for Peer-to-Peer firmware:[[ **Instruction **>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]
	327	+)))
435	435
436		-===== **2. Open project** =====
437	437
	330	+Users can import this example in node-red: **[[attach:serial USB.json||target="_blank"]]**
438	438
439		-Users can download Arduino files from this link: [[attach:Log-Temperature-Sensor-and-send-data-to-Node-red.ino||target="_blank"]]
	332	+[[image:image-20221104100520-2.png||height="605" width="1150"]]
440	440
441		-Then click Compile and Upload to LA66 Shield,
442	442
443		-[[image:image-20221108172432-7.png]]
	335	+= (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**-V​​​​​​​(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
444	444
445	445
	338	+(% style="color:blue" %)**USB TTL to LG01-V2  Connection:**
446	446
447		-===== **3. Open the Serial Monitor to check the LA66 Shield data** =====
448	448
	341	+Port 1 of the UART on the LG01-V2 is GND
449	449
450		-The UNO will now reads the temperature and humidity data from the sensor and broadcast it via LoRa wireless,
451		-
452		-[[image:image-20221108174840-8.png||height="731" width="671"]]
453		-
454		-
455		-
456		-Sending out data as below.
457		-
458		-[[image:image-20221108175113-9.png||height="556" width="998"]]
459		-
460		-
461		-=== 5.2.3 Set Up LG01v2 ===
462		-
463		-
464		-Configure LG01v2 LoRa channel parameters so it can get data from LA66 Shield
465		-
466		-(% style="color:red; font-weight:bold" %)**LG01v**(% style="color:red" %)**2 as Receiver: (configured as AT+RXMOD=65535,2)**
467		-
468	468	(% class="box infomessage" %)
469	469	(((
470		-**LG01-V2 configuration:**
	345	+**TXD  <~-~--> UART RXD (Gray line)**
471	471
472		-AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
473		-AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
474		-AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
475		-AT+POWER=14  ~-~--> TX Power Range set: 14dBm
476		-AT+CRC=1,1  ~-~--> TX and RX CRC Type
477		-AT+HEADER=0,0  ~-~--> TX and RX Header Type
478		-AT+CR=1,1  ~-~--> TX and RX Coding Rate
479		-AT+IQ=0,0  ~-~--> TX and RX InvertIQ
480		-AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
481		-AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
482		-AT+RXMOD=65535,2  ~-~-->  Rx Timeout and Reply mode, RX window always open**(0:No ACK, 1:Reply mode, 2:Send an ACK once got a message from another device. ACK Content is 0x00 FF )**
483		-)))
	347	+**RXD  <~-~--> UART TXD (White line)**
484	484
485		-
486		-=== 5.2.4 Test result ===
487		-
488		-
489		-After the above configuration is complete, users can send test simulation data to check whether the configuration is correct, In LA66 sheild serial console send:(% style="color:red" %)**(AT+SEND=1,hello world,2,3).**
	349	+**GND <~-~--> GND (Black line)**
490	490	)))
491	491
492		-When LG01v2 replies with ACK when it receives a packet sent by LA66 sheild.
493	493
494		-[[image:image-20221108164413-2.png]]
	353	+**LG01-V2 UART connection photo**
495	495
	355	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
496	496
497	497
498		-In the real-time log of LG01v2：
499	499
500		-[[image:image-20221108170314-3.png]]
	359	+In the PC, you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LG01v2. LG01v2 will output system info once power on as below:
501	501
502	502
503		-=== 5.2.5 Plot data chart in LG01v2 ===
	362	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
504	504
	364	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
505	505
506		-User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
507	507
508		-User can import this example in Node-Red: [[attach:Log-Temperature-Sensor-and-send-data-to-Node-red.json||target="_blank"]]
	367	+= **7. FAQ** =
509	509
510		-[[image:image-20221108180334-10.png||height="651" width="1141"]]
511	511
	370	+== **7.1 How does LG01-V2 communicate with Lora shield (LoRa.h)** ==
512	512
513		-The temperature and humidity chart is displayed in the built-in node-red UI
514	514
515		-**Browser input: (% style="background-color:yellow" %)__//http:~/~/<local-IPV4-address>//__(%%)**
	373	+This example describes how to use LG01-V2, LoRa Shield to set up a LoRa network
516	516
517		-[[image:image-20221108180458-11.png||height="402" width="1137"]]
518		-
519		-
520		-
521		-= 6. OTA System Update =
522		-
523		-
524		-LG01v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
525		-
526		-
527		-= 7. FAQ =
528		-
529		-== 7.1 How does LG01v2 communicate with Lora shield (LoRa.h) ==
530		-
531		-
532		-This example describes how to use LG01v2, LoRa Shield to set up a LoRa network,
533		-
534	534	[[image:image-20221103152238-8.png||height="251" width="654"]]
535	535
536	536
537		-(% style="color:red" %)**Prerequisites: The configurations of LG01v2 and Lora shield must match**
	378	+(% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
538	538
539		-**LG01v2 configuration:**
	380	+**LG01-V2 configuration:**
540	540
541	541	(% class="box infomessage" %)
542	542	(((
...	...	@@ -554,8 +554,6 @@
554	554	AT+RXDAFORM=1
555	555	)))
556	556
557		-
558		-
559	559	**Lora shield configuration:**
560	560
561	561	Lora Shield example: [[attach:LoRa_Shield_Sketch_For_MQTT.ino||target="_blank"]] , [[attach:arduino-LoRa-master.zip||target="_blank"]]
...	...	@@ -563,195 +563,65 @@
563	563	[[image:image-20221101161318-2.png]]
564	564
565	565
	405	+**Test LG01-V2 to receive Lora Shield data:**
566	566
567		-**Test LG01v2 to receive Lora Shield data:**
568		-
569	569	[[image:image-20221101161951-3.png]]
570	570
571	571
	410	+**Test the LG01-V​​​​​​​2 to send data:**
572	572
573		-**Test the LG01v2 to send data:**
574		-
575	575	[[image:image-20221101162527-4.png]]
576	576
577	577
578		-== 7.2 How does LG01v2 communicate with Heltec LoRa Node ==
	415	+= (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
579	579
580	580
581		-This example describes how to use LG01v2 and Heltec LoRa Node to set up a LoRa network,
582		-
583		-[[image:image-20221112161111-2.png||height="258" width="692"]]
584		-
585		-(% style="color:red" %)**Prerequisites: The configurations of LG01v2 and Lora shield must match**
586		-
587		-
588		-**LG01v2 configuration:**
589		-
590		-(% class="box infomessage" %)
591	591	(((
592		-AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
593		-AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
594		-AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
595		-AT+POWER=14  ~-~--> TX Power Range
596		-AT+CRC=1,1  ~-~--> TX and RX CRC Type
597		-AT+HEADER=0,0  ~-~--> TX and RX Header Type
598		-AT+CR=1,1  ~-~--> TX and RX Coding Rate
599		-AT+IQ=0,0  ~-~--> TX and RX InvertIQ
600		-AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
601		-AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
602		-AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode,RX window always open
603		-AT+RXDAFORM=1  ~-~--> RX data format**（0: Hex ,1: String）**
	419	+**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
604	604	)))
605	605
606		-
607		-After we upload the sketch to Heltec LoRa Node, we can see below output from Arduino.
608		-
609		-Lora Shield example: [[attach:LoRa_send_trial.ino||target="_blank"]]
610		-
611		-[[image:image-20221112162733-3.png||height="524" width="927"]]
612		-
613		-
614		-And we can see the logread of gateway as below, means the packet arrive gateway:
615		-
616		-[[image:image-20221112163119-4.png||height="808" width="560"]]
617		-
618		-
619		-== 7.3 How does LG01v2 communicate with LoRaWAN node ==
620		-
621		-
622		-This example describes how to use LG01v2 and LSN50 to set up a  network,
623		-
624		-In this case, users need to set LSN50 to work in ABP mode and transmit in only one frequency.
625		-
626		-Assume we have a LG01v2 working in the frequency 868100000 now, below is the steps.
627		-
628		-
629		-**Step1: **Configure the LG01v2
630		-
631		-(% class="box infomessage" %)
632	632	(((
633		-AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
634		-AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
635		-AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
636		-AT+SYNCWORD=1  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
637		-)))
	423	+**//With your question as detailed as possible. We will reply and help you in the shortest.//**
638	638
639		-**Step2:  **Run AT commands to make the LSN50 work in Single frequency and ABP mode. Below are the AT commands:
640	640
641		-(% class="box infomessage" %)
642		-(((
643		-AT+FDR  ~-~--> Reset Parameters to Factory Default, Keys Reserve
644		-AT+NJM=0  ~-~-->  Set to ABP mode
645		-AT+ADR=0  ~-~-->  Set the Adaptive Data Rate Off
646		-AT+DR=0  ~-~--> Set Data Rate (Set AT+DR=3 for 915 band)
647		-AT+TDC=300000  ~-~-->  Set transmit interval to 5 minutes
648		-AT+CHS=868100000  ~-~--> Set transmit frequency to 868.1Mhz
649		-AT+DADDR=FFFFF111  ~-~--> Set Device Address to 26 01 1A F1
650		-ATZ  ~-~--> Reset MCU
651		-)))
652	652
653		-**Step3:  **Check result
	427	+= **9. Reference** =
654	654
655	655
	430	+* Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
	431	+* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
656	656
657		-User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
658		-
659		-User can import this example in Node-Red: [[attach:LG01v2_LSN50v2_S31.json||target="_blank"]]
660		-
661		-
662		-First the user needs to fill in the NwkSkey and AppSkey in the LoraWan Packet Decrypter node.
663		-
664		-[[image:image-20230620103535-2.png||height="591" width="1138"]]
665		-
666		-[[image:image-20230620103153-1.png||height="610" width="1141"]]
667		-
668		-
669		-The data will be displayed in the built-in node-red UI
670		-
671		-**Browser input: (% style="background-color:yellow" %)__//http:~/~/<local-IPV4-address>//__(%%)**
672		-
673		-[[image:image-20230620103923-3.png||height="476" width="1138"]]
674		-
675		-
676		-== 7.4 How can users factory reset LG01v2 ==
677		-
678		-
679		-Users can download the image of LG01v2 from this link：[[dragino-lg01v2-1.7-0210>>https://www.dropbox.com/scl/fi/g0si61lcrvdjyto4ma951/dragino-lg01v2-1.7-0210.zip?rlkey=t03oqo493r2p7ign488rs2jsv&dl=0]]
680		-
681		-
682		-Then follow the steps in the link below to restore factory Settings to LG01v2：
683		-
684		-[[How to flash a new image(OS) to the gateway>>url:https://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
685		-
686		-
687		-= 8. Trouble Shooting =
688		-
689		-== 8.1  Fallback IP does not work, how can users check ==
690		-
691		-
692		-When the computer has completed the above fallback IP configuration,the LG01v2 Web UI is still not accessible via fallback IP.
693		-
694		-
695		-**1.Check whether the configuration is correct**
696		-
697		-Run the CMD command to ipconfig and ping 172.31.255.254.
698		-
699		-If this fails, the user needs to reconfigure.
700		-
701		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413170224-3.png?width=707&height=433&rev=1.1||alt="image-20230413170224-3.png"]]
702		-
703		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413170246-4.png?rev=1.1||alt="image-20230413170246-4.png"]]
704		-
705		-
706		-**2. Check whether the firewall is disabled**
707		-
708		-If the firewall is not down, this will affect access to the gateway.
709		-
710		-
711		-= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
712		-
713		-
714		-(((
715		-If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
716		-)))
717		-
718		-(((
719		-With your question as detailed as possible. We will reply and help you in the shortest.
720		-
721		-
722		-= 10. Reference =
723		-
724		-
725		-* Install Tago Core: Refer **Install Tago Core in LG01v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
726		-
727		-* [[Advance OS Reference Guide for L>>doc:Main.Armbian OS instruction.WebHome]]G01v2.
728		-
729	729
730	730	)))
731	731
732		-= 11. Order Info =
	436	+= **10. Order Info** =
733	733
734	734
735		-(% style="color:#0000ff" %)**LG01v2-XXX-YYY**
	439	+(% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
736	736
737	737	(% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
738	738
739		-* (% style="color:red" %)**868**(%%): For frequency : 863 ~~ 870Mhz
740		-* (% style="color:red" %)**915**(%%): For frequency : 902 ~~ 928Mhz
	443	+* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
	444	+* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
	445	+* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
	446	+* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
	447	+* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
	448	+* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
741	741
742	742	(% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
743	743
744		-* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
745		-* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America: Verizon, AT&T(FirstNet), U.S.Cellular; Canada: Telus
746		-* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
747		-* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
	452	+* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
	453	+* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
	454	+* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
	455	+* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
748	748
749	749	More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
750	750
751	751
752		-= 12. Manufacturer Info =
753	753
	461	+= **10. Manufacturer Info** =
754	754
	463	+
755	755	**Shenzhen Dragino Technology Development co. LTD**
756	756
757	757	Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
...	...	@@ -759,9 +759,10 @@
759	759	LongCheng Street, LongGang District ; Shenzhen 518116,China
760	760
761	761
762		-= 13. FCC Warning =
763	763
	472	+= **11. FCC Warning** =
764	764
	474	+
765	765	(((
766	766	This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
767	767	)))
...	...	@@ -791,6 +791,7 @@
791	791	(((
792	792	The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
793	793
794		-
795	795
796	796	)))
	506	+
	507	+~)~)~)

LG01v2_LSN50v2_S31.json

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-16.5 KB

Content

...	...	@@ -1,587 +1,0 @@
1		-[
2		- {
3		- "id": "5e07f5eeeb2a969b",
4		- "type": "tab",
5		- "label": "流程 1",
6		- "disabled": false,
7		- "info": "",
8		- "env": []
9		- },
10		- {
11		- "id": "9c26fa2f19e2b556",
12		- "type": "function",
13		- "z": "5e07f5eeeb2a969b",
14		- "name": "hex to base64",
15		- "func": "var input = msg.payload;\nvar base64 = Buffer.from(input, 'hex').toString('base64');\nmsg.payload = base64;\nreturn msg;",
16		- "outputs": 1,
17		- "noerr": 0,
18		- "initialize": "",
19		- "finalize": "",
20		- "libs": [],
21		- "x": 220,
22		- "y": 160,
23		- "wires": [
24		- [
25		- "075bc9172a4c6570",
26		- "3601a98894805fbe"
27		- ]
28		- ]
29		- },
30		- {
31		- "id": "ee0480c81e66d657",
32		- "type": "function",
33		- "z": "5e07f5eeeb2a969b",
34		- "name": "function 4",
35		- "func": "var bytes = msg.payload[\"uplink_message\"]\nvar data = msg.payload[\"out\"]\nvar mode = (parseInt(data.substring(12, 14), 16) & 0x7C) >> 2;\nif (mode != 2)\n{\nvar bat = (parseInt(data.substring(0,4),16)&0x3FFF)/1000;\nvar TempC1 = (parseFloat(parseInt(data.substring(4, 8),16)/10).toFixed(2));\nvar ADC_CH0V = (parseInt(data.substring(8, 12), 16) ) / 1000;\nvar Digital_IStatus = (parseInt((data.substring(8, 12),16) & 0x02))?\"H\":\"L\"; \n\nif (mode != 6) {\n\n var EXTI_Trigger = ((parseInt(data.substring(12, 14), 16) & 0x01))? \"TRUE\" : \"FALSE\";\n\n var Door_status = ((parseInt(data.substring(12, 14), 16) & 0x80))? \"CLOSE\" : \"OPEN\";\n\n}\n}\nif (mode == 0) {\n\n var Work_mode = \"IIC\";\n\n if ((parseInt(data.substring(18, 22), 16)) == 0){\n\n var Illum = (parseInt(data.substring(8, 12), 16));\n\n }\n\n else {\n\n var TempC_SHT = parseFloat(((parseInt(data.substring(14, 18), 16)) / 10).toFixed(2));\n\n var Hum_SHT = parseFloat((((parseInt(data.substring(18, 22), 16))) / 10).toFixed(1));\n\n }\n \n}\n\nelse if (mode == 1) {\n\n var Work_mode = \" Distance\";\n\n var Distance_cm = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(1));\n\n if (((parseInt(data.substring(18, 22), 16))) != 65535){\n\n var Distance_signal_strength = parseFloat(((parseInt(data.substring(18, 22), 16))).toFixed(0));\n\n }\n\n}\n\nelse if (mode == 2) {\n\n var Work_mode = \" 3ADC\";\n\n var BatV = (parseInt(data.substring(18, 22), 16)) / 10;\n\n var ADC_CH0V = ((parseInt(data.substring(0, 4), 16))) / 1000;\n\n var ADC_CH1V = ((parseInt(data.substring(4, 8), 16))) / 1000;\n\n var ADC_CH4V = ((parseInt(data.substring(8, 12), 16))) / 1000;\n\n var Digital_IStatus = ((parseInt(data.substring(12, 14), 16)) & 0x02) ? \"H\" : \"L\";\n\n var EXTI_Trigger = ((parseInt(data.substring(12, 14), 16)) & 0x01) ? \"TRUE\" : \"FALSE\";\n\n var Door_status = ((parseInt(data.substring(13, 14), 16)) & 0x80) ? \"CLOSE\" : \"OPEN\";\n\n if ((parseInt(data.substring(18, 22), 16) === 0)) {\n\n var Illum = ((parseInt(data.substring(14, 18), 16)));\n\n }\n\n else {\n\n var TempC_SHT = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(2));\n\n var Hum_SHT = parseFloat((((parseInt(data.substring(18, 24), 16))) / 10).toFixed(1));\n\n }\n\n}\n\nelse if (mode == 3) {\n\n var Work_mode = \"3DS18B20\";\n\n var TempC2 = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(2));\n\n var TempC3 = parseFloat((((parseInt(data.substring(18, 24), 16))) / 10).toFixed(1));\n\n\n\n}\n\nelse if (mode == 4) {\n\n var Work_mode = \"Weight\";\n\n var Weight = ((parseInt(data.substring(14, 18), 16)));\n\n}\n\nelse if (mode == 5) {\n\n var Work_mode = \"Count\";\n\n var Count = ((parseInt(data.substring(14, 22), 16)));\n\n}\n\n\n\nvar b = { payload: bat }, c = { payload: TempC1 }, d = { payload: ADC_CH0V }, e = { payload: Digital_IStatus }, f = { payload: EXTI_Trigger }, g = { payload: Door_status }, j = { payload: TempC_SHT }, s = { payload: Hum_SHT }, k = { payload: Work_mode };\nreturn [b,c,d,e,f,g,j,k,s];",
36		- "outputs": 9,
37		- "noerr": 0,
38		- "initialize": "",
39		- "finalize": "",
40		- "libs": [],
41		- "x": 660,
42		- "y": 300,
43		- "wires": [
44		- [
45		- "fd22b92d2b8de0fb"
46		- ],
47		- [
48		- "3307256a4e1ea53a"
49		- ],
50		- [
51		- "a3fd8302ec399e31"
52		- ],
53		- [
54		- "c7d1f63ff5f0026a"
55		- ],
56		- [
57		- "159967056da52706"
58		- ],
59		- [
60		- "a21581a41adc1714"
61		- ],
62		- [
63		- "7bb78b78445ac9e3"
64		- ],
65		- [
66		- "0364752170ed6228"
67		- ],
68		- [
69		- "65293155d71d54b9"
70		- ]
71		- ]
72		- },
73		- {
74		- "id": "e763b293d42dbdd5",
75		- "type": "change",
76		- "z": "5e07f5eeeb2a969b",
77		- "name": "",
78		- "rules": [
79		- {
80		- "t": "change",
81		- "p": "payload",
82		- "pt": "msg",
83		- "from": "Data: (HEX:)",
84		- "fromt": "str",
85		- "to": "",
86		- "tot": "str"
87		- },
88		- {
89		- "t": "change",
90		- "p": "payload",
91		- "pt": "msg",
92		- "from": " ",
93		- "fromt": "str",
94		- "to": "",
95		- "tot": "str"
96		- }
97		- ],
98		- "action": "",
99		- "property": "",
100		- "from": "",
101		- "to": "",
102		- "reg": false,
103		- "x": 420,
104		- "y": 60,
105		- "wires": [
106		- [
107		- "9c26fa2f19e2b556",
108		- "416a930e89291528"
109		- ]
110		- ]
111		- },
112		- {
113		- "id": "075bc9172a4c6570",
114		- "type": "lorawan-packet-decrypt-nwkey-appkey",
115		- "z": "5e07f5eeeb2a969b",
116		- "name": "FFFFF111",
117		- "nsw": "CCFFFFFFFFFFFFFFFFFFFFFFFFFFFFAA",
118		- "asw": "FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCC",
119		- "x": 510,
120		- "y": 160,
121		- "wires": [
122		- [
123		- "ee0480c81e66d657"
124		- ]
125		- ]
126		- },
127		- {
128		- "id": "13dc77a4e2bb4f72",
129		- "type": "serial in",
130		- "z": "5e07f5eeeb2a969b",
131		- "name": "",
132		- "serial": "bb1c0e81fd51fa9e",
133		- "x": 190,
134		- "y": 60,
135		- "wires": [
136		- [
137		- "e763b293d42dbdd5"
138		- ]
139		- ]
140		- },
141		- {
142		- "id": "3307256a4e1ea53a",
143		- "type": "ui_chart",
144		- "z": "5e07f5eeeb2a969b",
145		- "name": "",
146		- "group": "c1fddd37879528e5",
147		- "order": 1,
148		- "width": 0,
149		- "height": 0,
150		- "label": "TempC1",
151		- "chartType": "line",
152		- "legend": "false",
153		- "xformat": "HH:mm:ss",
154		- "interpolate": "linear",
155		- "nodata": "",
156		- "dot": false,
157		- "ymin": "",
158		- "ymax": "",
159		- "removeOlder": 1,
160		- "removeOlderPoints": "",
161		- "removeOlderUnit": "3600",
162		- "cutout": 0,
163		- "useOneColor": false,
164		- "useUTC": false,
165		- "colors": [
166		- "#1f77b4",
167		- "#aec7e8",
168		- "#ff7f0e",
169		- "#2ca02c",
170		- "#98df8a",
171		- "#d62728",
172		- "#ff9896",
173		- "#9467bd",
174		- "#c5b0d5"
175		- ],
176		- "outputs": 1,
177		- "useDifferentColor": false,
178		- "className": "",
179		- "x": 940,
180		- "y": 160,
181		- "wires": [
182		- []
183		- ]
184		- },
185		- {
186		- "id": "a3fd8302ec399e31",
187		- "type": "ui_chart",
188		- "z": "5e07f5eeeb2a969b",
189		- "name": "",
190		- "group": "6d46fdae9f413f7b",
191		- "order": 1,
192		- "width": 0,
193		- "height": 0,
194		- "label": "ADC_CH0V",
195		- "chartType": "line",
196		- "legend": "false",
197		- "xformat": "HH:mm:ss",
198		- "interpolate": "linear",
199		- "nodata": "",
200		- "dot": false,
201		- "ymin": "",
202		- "ymax": "",
203		- "removeOlder": 1,
204		- "removeOlderPoints": "",
205		- "removeOlderUnit": "3600",
206		- "cutout": 0,
207		- "useOneColor": false,
208		- "useUTC": false,
209		- "colors": [
210		- "#1f77b4",
211		- "#aec7e8",
212		- "#ff7f0e",
213		- "#2ca02c",
214		- "#98df8a",
215		- "#d62728",
216		- "#ff9896",
217		- "#9467bd",
218		- "#c5b0d5"
219		- ],
220		- "outputs": 1,
221		- "useDifferentColor": false,
222		- "className": "",
223		- "x": 950,
224		- "y": 200,
225		- "wires": [
226		- []
227		- ]
228		- },
229		- {
230		- "id": "fd22b92d2b8de0fb",
231		- "type": "ui_chart",
232		- "z": "5e07f5eeeb2a969b",
233		- "name": "",
234		- "group": "bb5657c2a8c290a3",
235		- "order": 1,
236		- "width": 0,
237		- "height": 0,
238		- "label": "BatV",
239		- "chartType": "line",
240		- "legend": "false",
241		- "xformat": "HH:mm:ss",
242		- "interpolate": "linear",
243		- "nodata": "",
244		- "dot": false,
245		- "ymin": "",
246		- "ymax": "",
247		- "removeOlder": 1,
248		- "removeOlderPoints": "",
249		- "removeOlderUnit": "3600",
250		- "cutout": 0,
251		- "useOneColor": false,
252		- "useUTC": false,
253		- "colors": [
254		- "#1f77b4",
255		- "#aec7e8",
256		- "#ff7f0e",
257		- "#2ca02c",
258		- "#98df8a",
259		- "#d62728",
260		- "#ff9896",
261		- "#9467bd",
262		- "#c5b0d5"
263		- ],
264		- "outputs": 1,
265		- "useDifferentColor": false,
266		- "className": "",
267		- "x": 930,
268		- "y": 120,
269		- "wires": [
270		- []
271		- ]
272		- },
273		- {
274		- "id": "c7d1f63ff5f0026a",
275		- "type": "ui_text",
276		- "z": "5e07f5eeeb2a969b",
277		- "group": "528e965cef294158",
278		- "order": 0,
279		- "width": "6",
280		- "height": "4",
281		- "name": "",
282		- "label": "Digital_IStatus",
283		- "format": "{{msg.payload}}",
284		- "layout": "col-center",
285		- "className": "",
286		- "x": 960,
287		- "y": 240,
288		- "wires": []
289		- },
290		- {
291		- "id": "159967056da52706",
292		- "type": "ui_text",
293		- "z": "5e07f5eeeb2a969b",
294		- "group": "5e615e3edb5999a0",
295		- "order": 0,
296		- "width": "6",
297		- "height": "4",
298		- "name": "",
299		- "label": "EXTI_Trigger",
300		- "format": "{{msg.payload}}",
301		- "layout": "col-center",
302		- "className": "",
303		- "x": 950,
304		- "y": 280,
305		- "wires": []
306		- },
307		- {
308		- "id": "7bb78b78445ac9e3",
309		- "type": "ui_chart",
310		- "z": "5e07f5eeeb2a969b",
311		- "name": "",
312		- "group": "5f7fec85295a7f7c",
313		- "order": 0,
314		- "width": 0,
315		- "height": 0,
316		- "label": "TempC_SHT",
317		- "chartType": "line",
318		- "legend": "false",
319		- "xformat": "HH:mm:ss",
320		- "interpolate": "linear",
321		- "nodata": "",
322		- "dot": false,
323		- "ymin": "",
324		- "ymax": "",
325		- "removeOlder": 1,
326		- "removeOlderPoints": "",
327		- "removeOlderUnit": "3600",
328		- "cutout": 0,
329		- "useOneColor": false,
330		- "useUTC": false,
331		- "colors": [
332		- "#1f77b4",
333		- "#aec7e8",
334		- "#ff7f0e",
335		- "#2ca02c",
336		- "#98df8a",
337		- "#d62728",
338		- "#ff9896",
339		- "#9467bd",
340		- "#c5b0d5"
341		- ],
342		- "outputs": 1,
343		- "useDifferentColor": false,
344		- "className": "",
345		- "x": 950,
346		- "y": 360,
347		- "wires": [
348		- []
349		- ]
350		- },
351		- {
352		- "id": "0364752170ed6228",
353		- "type": "ui_text",
354		- "z": "5e07f5eeeb2a969b",
355		- "group": "3cb616f18674c42a",
356		- "order": 0,
357		- "width": "6",
358		- "height": "4",
359		- "name": "",
360		- "label": "Work_mode",
361		- "format": "{{msg.payload}}",
362		- "layout": "col-center",
363		- "className": "",
364		- "x": 950,
365		- "y": 400,
366		- "wires": []
367		- },
368		- {
369		- "id": "65293155d71d54b9",
370		- "type": "ui_chart",
371		- "z": "5e07f5eeeb2a969b",
372		- "name": "",
373		- "group": "bb2e35e7a931c198",
374		- "order": 0,
375		- "width": 0,
376		- "height": 0,
377		- "label": "Hum_SHT",
378		- "chartType": "line",
379		- "legend": "false",
380		- "xformat": "HH:mm:ss",
381		- "interpolate": "linear",
382		- "nodata": "",
383		- "dot": false,
384		- "ymin": "",
385		- "ymax": "",
386		- "removeOlder": 1,
387		- "removeOlderPoints": "",
388		- "removeOlderUnit": "3600",
389		- "cutout": 0,
390		- "useOneColor": false,
391		- "useUTC": false,
392		- "colors": [
393		- "#1f77b4",
394		- "#aec7e8",
395		- "#ff7f0e",
396		- "#2ca02c",
397		- "#98df8a",
398		- "#d62728",
399		- "#ff9896",
400		- "#9467bd",
401		- "#c5b0d5"
402		- ],
403		- "outputs": 1,
404		- "useDifferentColor": false,
405		- "className": "",
406		- "x": 950,
407		- "y": 440,
408		- "wires": [
409		- []
410		- ]
411		- },
412		- {
413		- "id": "a21581a41adc1714",
414		- "type": "ui_text",
415		- "z": "5e07f5eeeb2a969b",
416		- "group": "9109ae41eee353df",
417		- "order": 0,
418		- "width": "6",
419		- "height": "4",
420		- "name": "",
421		- "label": "Door_status",
422		- "format": "{{msg.payload}}",
423		- "layout": "col-center",
424		- "className": "",
425		- "x": 950,
426		- "y": 320,
427		- "wires": []
428		- },
429		- {
430		- "id": "416a930e89291528",
431		- "type": "debug",
432		- "z": "5e07f5eeeb2a969b",
433		- "name": "debug 2",
434		- "active": true,
435		- "tosidebar": true,
436		- "console": false,
437		- "tostatus": false,
438		- "complete": "false",
439		- "statusVal": "",
440		- "statusType": "auto",
441		- "x": 660,
442		- "y": 60,
443		- "wires": []
444		- },
445		- {
446		- "id": "3601a98894805fbe",
447		- "type": "debug",
448		- "z": "5e07f5eeeb2a969b",
449		- "name": "debug 3",
450		- "active": true,
451		- "tosidebar": true,
452		- "console": false,
453		- "tostatus": false,
454		- "complete": "false",
455		- "statusVal": "",
456		- "statusType": "auto",
457		- "x": 380,
458		- "y": 240,
459		- "wires": []
460		- },
461		- {
462		- "id": "bb1c0e81fd51fa9e",
463		- "type": "serial-port",
464		- "serialport": "/dev/ttyUSB0",
465		- "serialbaud": "9600",
466		- "databits": "8",
467		- "parity": "none",
468		- "stopbits": "1",
469		- "waitfor": "",
470		- "dtr": "none",
471		- "rts": "none",
472		- "cts": "none",
473		- "dsr": "none",
474		- "newline": "\\n",
475		- "bin": "false",
476		- "out": "char",
477		- "addchar": "\\r\\n",
478		- "responsetimeout": "10000"
479		- },
480		- {
481		- "id": "c1fddd37879528e5",
482		- "type": "ui_group",
483		- "name": "BatV",
484		- "tab": "abb98f80600a5448",
485		- "order": 1,
486		- "disp": true,
487		- "width": "6",
488		- "collapse": false,
489		- "className": ""
490		- },
491		- {
492		- "id": "6d46fdae9f413f7b",
493		- "type": "ui_group",
494		- "name": "ADC_CH0V",
495		- "tab": "abb98f80600a5448",
496		- "order": 1,
497		- "disp": true,
498		- "width": "6",
499		- "collapse": false,
500		- "className": ""
501		- },
502		- {
503		- "id": "bb5657c2a8c290a3",
504		- "type": "ui_group",
505		- "name": "BatV",
506		- "tab": "abb98f80600a5448",
507		- "order": 3,
508		- "disp": true,
509		- "width": "6",
510		- "collapse": false,
511		- "className": ""
512		- },
513		- {
514		- "id": "528e965cef294158",
515		- "type": "ui_group",
516		- "name": "Digital_IStatus",
517		- "tab": "abb98f80600a5448",
518		- "order": 4,
519		- "disp": true,
520		- "width": "6",
521		- "collapse": false,
522		- "className": ""
523		- },
524		- {
525		- "id": "5e615e3edb5999a0",
526		- "type": "ui_group",
527		- "name": "EXTI_Trigger",
528		- "tab": "abb98f80600a5448",
529		- "order": 5,
530		- "disp": true,
531		- "width": "6",
532		- "collapse": false,
533		- "className": ""
534		- },
535		- {
536		- "id": "5f7fec85295a7f7c",
537		- "type": "ui_group",
538		- "name": "TempC_SHT",
539		- "tab": "abb98f80600a5448",
540		- "order": 6,
541		- "disp": true,
542		- "width": "6",
543		- "collapse": false,
544		- "className": ""
545		- },
546		- {
547		- "id": "3cb616f18674c42a",
548		- "type": "ui_group",
549		- "name": "Work_mode",
550		- "tab": "abb98f80600a5448",
551		- "order": 7,
552		- "disp": true,
553		- "width": "6",
554		- "collapse": false,
555		- "className": ""
556		- },
557		- {
558		- "id": "bb2e35e7a931c198",
559		- "type": "ui_group",
560		- "name": "Hum_SHT",
561		- "tab": "abb98f80600a5448",
562		- "order": 8,
563		- "disp": true,
564		- "width": "6",
565		- "collapse": false,
566		- "className": ""
567		- },
568		- {
569		- "id": "9109ae41eee353df",
570		- "type": "ui_group",
571		- "name": "Door_status",
572		- "tab": "abb98f80600a5448",
573		- "order": 9,
574		- "disp": true,
575		- "width": "6",
576		- "collapse": false,
577		- "className": ""
578		- },
579		- {
580		- "id": "abb98f80600a5448",
581		- "type": "ui_tab",
582		- "name": "LSN50v2 S31",
583		- "icon": "LSN50v2 S31",
584		- "disabled": false,
585		- "hidden": false
586		- }
587		-]

LoRa_send_trial.ino

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-3.4 KB

Content

...	...	@@ -1,124 +1,0 @@
1		-#include "LoRaWan_APP.h"
2		-#include "Arduino.h"
3		-
4		-
5		-#define RF_FREQUENCY 868100000 // Hz
6		-
7		-#define TX_OUTPUT_POWER 5 // dBm
8		-
9		-#define LORA_BANDWIDTH 0 // [0: 125 kHz,
10		- // 1: 250 kHz,
11		- // 2: 500 kHz,
12		- // 3: Reserved]
13		-#define LORA_SPREADING_FACTOR 12 // [SF7..SF12]
14		-#define LORA_CODINGRATE 1 // [1: 4/5,
15		- // 2: 4/6,
16		- // 3: 4/7,
17		- // 4: 4/8]
18		-#define LORA_PREAMBLE_LENGTH 8 // Same for Tx and Rx
19		-#define LORA_SYMBOL_TIMEOUT 0 // Symbols
20		-#define LORA_FIX_LENGTH_PAYLOAD_ON false
21		-#define LORA_IQ_INVERSION_ON false
22		-
23		-
24		-#define RX_TIMEOUT_VALUE 1000
25		-#define BUFFER_SIZE 30 // Define the payload size here
26		-
27		-float tem,hum;
28		-char tem_1[8]={"\0"},hum_1[8]={"\0"};
29		-char *node_id = "<GW01>"; //From LG01 via web Local Channel settings on MQTT.Please refer <> dataformat in here.
30		-
31		-char txpacket[BUFFER_SIZE];
32		-char rxpacket[BUFFER_SIZE];
33		-
34		-double txNumber;
35		-
36		-bool lora_idle=true;
37		-
38		-static RadioEvents_t RadioEvents;
39		-void OnTxDone( void );
40		-void OnTxTimeout( void );
41		-
42		-void dhtTem()
43		-{
44		- tem = random(15,40);
45		- hum = random(40,80);
46		- Serial.println(F("The temperature and humidity:"));
47		- Serial.print("[");
48		- Serial.print(tem);
49		- Serial.print("℃");
50		- Serial.print(",");
51		- Serial.print(hum);
52		- Serial.print("%");
53		- Serial.print("]");
54		- Serial.println("");
55		-}
56		-
57		-void dhtWrite()
58		-{
59		- char data[50] = "\0";
60		- for(int i = 0; i < 50; i++)
61		- {
62		- data[i] = node_id[i];
63		- }
64		-
65		- dtostrf(tem,0,1,tem_1);
66		- dtostrf(hum,0,1,hum_1);
67		-
68		- strcat(data,"tem_a=");
69		- strcat(data,tem_1);
70		- strcat(data,"&hum_a=");
71		- strcat(data,hum_1);
72		- strcpy((char *)txpacket,data);
73		-
74		- Serial.println((char *)txpacket);
75		-}
76		-
77		-void setup() {
78		- Serial.begin(115200);
79		- Mcu.begin();
80		-
81		- txNumber=0;
82		-
83		- RadioEvents.TxDone = OnTxDone;
84		- RadioEvents.TxTimeout = OnTxTimeout;
85		-
86		- Radio.Init( &RadioEvents );
87		- Radio.SetChannel( RF_FREQUENCY );
88		- Radio.SetTxConfig( MODEM_LORA, TX_OUTPUT_POWER, 0, LORA_BANDWIDTH,
89		- LORA_SPREADING_FACTOR, LORA_CODINGRATE,
90		- LORA_PREAMBLE_LENGTH, LORA_FIX_LENGTH_PAYLOAD_ON,
91		- true, 0, 0, LORA_IQ_INVERSION_ON, 3000 );
92		- }
93		-
94		-
95		-
96		-void loop()
97		-{
98		- if(lora_idle == true)
99		- {
100		- delay(5000);
101		- txNumber += 0.01;
102		- Serial.println(txNumber);
103		-
104		- dhtTem();
105		- dhtWrite();
106		- Radio.Send( (uint8_t *)txpacket, strlen(txpacket) ); //send the package out
107		- lora_idle = false;
108		- }
109		- Radio.IrqProcess( );
110		-}
111		-
112		-void OnTxDone( void )
113		-{
114		- Serial.println("TX done......");
115		- lora_idle = true;
116		-}
117		-
118		-void OnTxTimeout( void )
119		-{
120		- Radio.Sleep( );
121		- Serial.println("TX Timeout......");
122		- lora_idle = true;
123		-}
124		-

Log-Temperature-Sensor-and-send-data-to-Node-red.ino

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-3.6 KB

Content

...	...	@@ -1,150 +1,0 @@
1		-#include <SoftwareSerial.h>
2		-#include <Adafruit_Sensor.h>
3		-#include <DHT.h>
4		-#include <DHT_U.h>
5		-/*
6		-
7		-*/
8		-#define DHTPIN 8 // Digital pin connected to the DHT sensor
9		-#define DHTTYPE DHT11 // DHT 11
10		-DHT_Unified dht(DHTPIN, DHTTYPE);
11		-
12		-String inputString = ""; // a String to hold incoming data
13		-bool stringComplete = false; // whether the string is complete
14		-
15		-long old_time=millis();
16		-long new_time;
17		-
18		-long uplink_interval=30000; //ms
19		-
20		-float DHT11_temp;
21		-float DHT11_hum;
22		-
23		-SoftwareSerial ss(10, 11); // Arduino RX, TX ,
24		-
25		-char rxbuff[128];
26		-uint8_t rxbuff_index=0;
27		-
28		-void setup() {
29		- // initialize serial
30		- Serial.begin(9600);
31		-
32		- ss.begin(9600);
33		- ss.listen();
34		-
35		- // reserve 200 bytes for the inputString:
36		- inputString.reserve(200);
37		-
38		- dht.begin();
39		- sensor_t sensor;
40		- dht.temperature().getSensor(&sensor);
41		- dht.humidity().getSensor(&sensor);
42		-
43		- ss.println("ATZ");//reset LA66
44		-}
45		-
46		-void loop() {
47		-
48		- while ( ss.available()) {
49		- // get the new byte:
50		- char inChar = (char) ss.read();
51		- // add it to the inputString:
52		- inputString += inChar;
53		-
54		- rxbuff[rxbuff_index++]=inChar;
55		-
56		- if(rxbuff_index>128)
57		- {
58		- rxbuff[rxbuff_index]='\0';
59		- rxbuff_index=0;
60		- break;
61		- }
62		-
63		- // if the incoming character is a newline, set a flag so the main loop can
64		- // do something about it:
65		- if (inChar == '\n' || inChar == '\r') {
66		- stringComplete = true;
67		- rxbuff[rxbuff_index]='\0';
68		- rxbuff_index=0;
69		- }
70		- }
71		-
72		- while ( Serial.available()) {
73		- // get the new byte:
74		- char inChar = (char) Serial.read();
75		- // add it to the inputString:
76		- inputString += inChar;
77		- // if the incoming character is a newline, set a flag so the main loop can
78		- // do something about it:
79		- if (inChar == '\n' || inChar == '\r') {
80		- ss.print(inputString);
81		- inputString = "\0";
82		- }
83		- }
84		-
85		- // print the string when a newline arrives:
86		- if (stringComplete) {
87		- Serial.print(inputString);
88		-
89		- // clear the string:
90		- inputString = "\0";
91		- stringComplete = false;
92		- }
93		-
94		- new_time = millis();
95		-
96		- if(new_time-old_time>=uplink_interval){
97		- old_time = new_time;
98		-
99		- Serial.print(F("\r\n"));
100		- // Get temperature event and print its value.
101		- sensors_event_t event;
102		- dht.temperature().getEvent(&event);
103		- if (isnan(event.temperature)) {
104		- Serial.println(F("Error reading temperature!"));
105		- DHT11_temp=327.67;
106		- }
107		- else {
108		- DHT11_temp=event.temperature;
109		-
110		- if(DHT11_temp>60){
111		- DHT11_temp=60;
112		- }
113		- else if(DHT11_temp<-20){
114		- DHT11_temp=-20;
115		- }
116		- }
117		- // Get humidity event and print its value.
118		- dht.humidity().getEvent(&event);
119		- if (isnan(event.relative_humidity)) {
120		- DHT11_hum=327.67;
121		- Serial.println(F("Error reading humidity!"));
122		- }
123		- else {
124		- DHT11_hum=event.relative_humidity;
125		-
126		- if(DHT11_hum>100){
127		- DHT11_hum=100;
128		- }
129		- else if(DHT11_hum<0){
130		- DHT11_hum=0;
131		- }
132		- }
133		-
134		- Serial.print(F("Temperature: "));
135		- Serial.print(DHT11_temp);
136		- Serial.println(F("°C"));
137		- Serial.print(F("Humidity: "));
138		- Serial.print(DHT11_hum);
139		- Serial.println(F("%"));
140		- Serial.print(F("\r\n"));
141		-
142		- char sensor_data_buff[128]="\0";
143		-
144		- //confirm status,Fport,payload length,payload(HEX)
145		- snprintf(sensor_data_buff,128,"AT+SEND=0,%02X%02X%02X%02X,0,0",(short)(DHT11_temp*100)>>8 & 0xFF,(short)(DHT11_temp*100) & 0xFF,(short)(DHT11_hum*10)>>8 & 0xFF,(short)(DHT11_hum*10) & 0xFF);
146		- ss.print(sensor_data_buff);
147		- ss.print('\r');
148		- }
149		-}
150		-

Log-Temperature-Sensor-and-send-data-to-Node-red.json

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-10.3 KB

Content

...	...	@@ -1,443 +1,0 @@
1		-[
2		- {
3		- "id": "0a211e08511c4bdd",
4		- "type": "tab",
5		- "label": "serial USB",
6		- "disabled": false,
7		- "info": "",
8		- "env": []
9		- },
10		- {
11		- "id": "4a97eeb54bf57a6d",
12		- "type": "serial in",
13		- "z": "0a211e08511c4bdd",
14		- "name": "",
15		- "serial": "bb1c0e81fd51fa9e",
16		- "x": 210,
17		- "y": 60,
18		- "wires": [
19		- [
20		- "d2493fb9752dbcab",
21		- "d183c255973c979e"
22		- ]
23		- ]
24		- },
25		- {
26		- "id": "12f1eeb8049675c1",
27		- "type": "inject",
28		- "z": "0a211e08511c4bdd",
29		- "name": "AT+SEND=1,hello world,0,3",
30		- "props": [
31		- {
32		- "p": "payload"
33		- }
34		- ],
35		- "repeat": "",
36		- "crontab": "",
37		- "once": false,
38		- "onceDelay": 0.1,
39		- "topic": "",
40		- "payload": "AT+SEND=1,hello world,0,3",
41		- "payloadType": "str",
42		- "x": 220,
43		- "y": 260,
44		- "wires": [
45		- [
46		- "a5d2f5df63a2148e"
47		- ]
48		- ]
49		- },
50		- {
51		- "id": "a5d2f5df63a2148e",
52		- "type": "serial out",
53		- "z": "0a211e08511c4bdd",
54		- "name": "",
55		- "serial": "bb1c0e81fd51fa9e",
56		- "x": 540,
57		- "y": 260,
58		- "wires": []
59		- },
60		- {
61		- "id": "dc04c04a0bc0e5db",
62		- "type": "inject",
63		- "z": "0a211e08511c4bdd",
64		- "name": "",
65		- "props": [
66		- {
67		- "p": "payload"
68		- }
69		- ],
70		- "repeat": "",
71		- "crontab": "",
72		- "once": false,
73		- "onceDelay": 0.1,
74		- "topic": "",
75		- "payload": "ATZ",
76		- "payloadType": "str",
77		- "x": 290,
78		- "y": 320,
79		- "wires": [
80		- [
81		- "a5d2f5df63a2148e"
82		- ]
83		- ]
84		- },
85		- {
86		- "id": "3de96a220e28e8f0",
87		- "type": "inject",
88		- "z": "0a211e08511c4bdd",
89		- "name": "AT+FRE",
90		- "props": [
91		- {
92		- "p": "payload"
93		- }
94		- ],
95		- "repeat": "",
96		- "crontab": "",
97		- "once": false,
98		- "onceDelay": 0.1,
99		- "topic": "",
100		- "payload": "AT+FRE=868.100,868.100",
101		- "payloadType": "str",
102		- "x": 280,
103		- "y": 380,
104		- "wires": [
105		- [
106		- "a5d2f5df63a2148e"
107		- ]
108		- ]
109		- },
110		- {
111		- "id": "638725a47a1e4365",
112		- "type": "inject",
113		- "z": "0a211e08511c4bdd",
114		- "name": "AT+BW",
115		- "props": [
116		- {
117		- "p": "payload"
118		- }
119		- ],
120		- "repeat": "",
121		- "crontab": "",
122		- "once": false,
123		- "onceDelay": 0.1,
124		- "topic": "",
125		- "payload": "AT+BW=0,0",
126		- "payloadType": "str",
127		- "x": 290,
128		- "y": 440,
129		- "wires": [
130		- [
131		- "a5d2f5df63a2148e"
132		- ]
133		- ]
134		- },
135		- {
136		- "id": "85ba9868d1f3e82c",
137		- "type": "inject",
138		- "z": "0a211e08511c4bdd",
139		- "name": "AT+SF",
140		- "props": [
141		- {
142		- "p": "payload"
143		- }
144		- ],
145		- "repeat": "",
146		- "crontab": "",
147		- "once": false,
148		- "onceDelay": 0.1,
149		- "topic": "",
150		- "payload": "AT+SF=12,12",
151		- "payloadType": "str",
152		- "x": 290,
153		- "y": 500,
154		- "wires": [
155		- [
156		- "a5d2f5df63a2148e"
157		- ]
158		- ]
159		- },
160		- {
161		- "id": "144b2749013ffe57",
162		- "type": "inject",
163		- "z": "0a211e08511c4bdd",
164		- "name": "AT+RXMOD",
165		- "props": [
166		- {
167		- "p": "payload"
168		- }
169		- ],
170		- "repeat": "",
171		- "crontab": "",
172		- "once": false,
173		- "onceDelay": 0.1,
174		- "topic": "",
175		- "payload": "AT+RXMOD=65535,2",
176		- "payloadType": "str",
177		- "x": 270,
178		- "y": 560,
179		- "wires": [
180		- [
181		- "a5d2f5df63a2148e"
182		- ]
183		- ]
184		- },
185		- {
186		- "id": "bfb2e9df89dc5e2f",
187		- "type": "inject",
188		- "z": "0a211e08511c4bdd",
189		- "name": "AT+SYNCWORD",
190		- "props": [
191		- {
192		- "p": "payload"
193		- }
194		- ],
195		- "repeat": "",
196		- "crontab": "",
197		- "once": false,
198		- "onceDelay": 0.1,
199		- "topic": "",
200		- "payload": "AT+SYNCWORD=0",
201		- "payloadType": "str",
202		- "x": 260,
203		- "y": 620,
204		- "wires": [
205		- [
206		- "a5d2f5df63a2148e"
207		- ]
208		- ]
209		- },
210		- {
211		- "id": "d2493fb9752dbcab",
212		- "type": "function",
213		- "z": "0a211e08511c4bdd",
214		- "name": "function 1",
215		- "func": "var data = msg.payload\nif (data.substring(0, 4) == \"Data\") {\n if (data.substring(6, 12) == \"(HEX:)\") {\n var temp = data.substring(13, 15) + data.substring(16, 18)\n var hum = data.substring(19, 21) + data.substring(22, 24)\n var temp1 = parseInt(temp, 16) / 100\n var hum1 = parseInt(hum, 16) / 10\n var a1 = { payload: temp1 }, a2 = { payload: hum1 }\n }\n if (data.substring(6, 15) == \"(String:)\") {\n var temp = data.substring(20, 24)\n var hum = data.substring(29, 34)\n a1 = { payload: temp }, a2 = { payload: hum }\n }\n}\nif (data.substring(0, 4) == \"Rssi\") {\n var rssi = data.substring(6)\n var a3 = { payload: rssi }\n}\nreturn [a1, a2, a3];",
216		- "outputs": 3,
217		- "noerr": 0,
218		- "initialize": "",
219		- "finalize": "",
220		- "libs": [],
221		- "x": 420,
222		- "y": 60,
223		- "wires": [
224		- [
225		- "c17d94be4317ae6c"
226		- ],
227		- [
228		- "20c5b1c7f42fa6bb"
229		- ],
230		- [
231		- "39a8462f3d748eef"
232		- ]
233		- ]
234		- },
235		- {
236		- "id": "39a8462f3d748eef",
237		- "type": "ui_chart",
238		- "z": "0a211e08511c4bdd",
239		- "name": "",
240		- "group": "ef41b39771110fa5",
241		- "order": 1,
242		- "width": 0,
243		- "height": 0,
244		- "label": "RSSI",
245		- "chartType": "line",
246		- "legend": "false",
247		- "xformat": "dd HH:mm",
248		- "interpolate": "linear",
249		- "nodata": "",
250		- "dot": true,
251		- "ymin": "",
252		- "ymax": "",
253		- "removeOlder": 1,
254		- "removeOlderPoints": "",
255		- "removeOlderUnit": "3600",
256		- "cutout": 0,
257		- "useOneColor": false,
258		- "useUTC": false,
259		- "colors": [
260		- "#1f77b4",
261		- "#aec7e8",
262		- "#ff7f0e",
263		- "#2ca02c",
264		- "#98df8a",
265		- "#d62728",
266		- "#ff9896",
267		- "#9467bd",
268		- "#c5b0d5"
269		- ],
270		- "outputs": 1,
271		- "useDifferentColor": false,
272		- "className": "",
273		- "x": 670,
274		- "y": 180,
275		- "wires": [
276		- []
277		- ]
278		- },
279		- {
280		- "id": "c17d94be4317ae6c",
281		- "type": "ui_chart",
282		- "z": "0a211e08511c4bdd",
283		- "name": "",
284		- "group": "7e1d1c102cf74e6b",
285		- "order": 1,
286		- "width": 0,
287		- "height": 0,
288		- "label": "Temperature",
289		- "chartType": "line",
290		- "legend": "false",
291		- "xformat": "HH:mm:ss",
292		- "interpolate": "linear",
293		- "nodata": "",
294		- "dot": true,
295		- "ymin": "",
296		- "ymax": "",
297		- "removeOlder": 1,
298		- "removeOlderPoints": "",
299		- "removeOlderUnit": "3600",
300		- "cutout": 0,
301		- "useOneColor": false,
302		- "useUTC": false,
303		- "colors": [
304		- "#1f77b4",
305		- "#aec7e8",
306		- "#ff7f0e",
307		- "#2ca02c",
308		- "#98df8a",
309		- "#d62728",
310		- "#ff9896",
311		- "#9467bd",
312		- "#c5b0d5"
313		- ],
314		- "outputs": 1,
315		- "useDifferentColor": false,
316		- "className": "",
317		- "x": 690,
318		- "y": 100,
319		- "wires": [
320		- []
321		- ]
322		- },
323		- {
324		- "id": "20c5b1c7f42fa6bb",
325		- "type": "ui_chart",
326		- "z": "0a211e08511c4bdd",
327		- "name": "",
328		- "group": "3f5d139f158d7c1c",
329		- "order": 2,
330		- "width": 0,
331		- "height": 0,
332		- "label": "Humidity",
333		- "chartType": "line",
334		- "legend": "false",
335		- "xformat": "HH:mm:ss",
336		- "interpolate": "linear",
337		- "nodata": "",
338		- "dot": true,
339		- "ymin": "",
340		- "ymax": "",
341		- "removeOlder": 1,
342		- "removeOlderPoints": "",
343		- "removeOlderUnit": "3600",
344		- "cutout": 0,
345		- "useOneColor": false,
346		- "useUTC": false,
347		- "colors": [
348		- "#1f77b4",
349		- "#aec7e8",
350		- "#ff7f0e",
351		- "#2ca02c",
352		- "#98df8a",
353		- "#d62728",
354		- "#ff9896",
355		- "#9467bd",
356		- "#c5b0d5"
357		- ],
358		- "outputs": 1,
359		- "useDifferentColor": false,
360		- "className": "",
361		- "x": 680,
362		- "y": 140,
363		- "wires": [
364		- []
365		- ]
366		- },
367		- {
368		- "id": "d183c255973c979e",
369		- "type": "debug",
370		- "z": "0a211e08511c4bdd",
371		- "name": "debug 1",
372		- "active": true,
373		- "tosidebar": true,
374		- "console": false,
375		- "tostatus": false,
376		- "complete": "false",
377		- "statusVal": "",
378		- "statusType": "auto",
379		- "x": 420,
380		- "y": 180,
381		- "wires": []
382		- },
383		- {
384		- "id": "bb1c0e81fd51fa9e",
385		- "type": "serial-port",
386		- "serialport": "/dev/ttyUSB0",
387		- "serialbaud": "9600",
388		- "databits": "8",
389		- "parity": "none",
390		- "stopbits": "1",
391		- "waitfor": "",
392		- "dtr": "none",
393		- "rts": "none",
394		- "cts": "none",
395		- "dsr": "none",
396		- "newline": "\\n",
397		- "bin": "false",
398		- "out": "char",
399		- "addchar": "\\r\\n",
400		- "responsetimeout": "10000"
401		- },
402		- {
403		- "id": "ef41b39771110fa5",
404		- "type": "ui_group",
405		- "name": "rssi",
406		- "tab": "abb98f80600a5448",
407		- "order": 3,
408		- "disp": true,
409		- "width": "6",
410		- "collapse": false,
411		- "className": ""
412		- },
413		- {
414		- "id": "7e1d1c102cf74e6b",
415		- "type": "ui_group",
416		- "name": "TEM",
417		- "tab": "abb98f80600a5448",
418		- "order": 4,
419		- "disp": true,
420		- "width": "6",
421		- "collapse": false,
422		- "className": ""
423		- },
424		- {
425		- "id": "3f5d139f158d7c1c",
426		- "type": "ui_group",
427		- "name": "HUM",
428		- "tab": "abb98f80600a5448",
429		- "order": 2,
430		- "disp": true,
431		- "width": "6",
432		- "collapse": false,
433		- "className": ""
434		- },
435		- {
436		- "id": "abb98f80600a5448",
437		- "type": "ui_tab",
438		- "name": "LG01v2",
439		- "icon": "LG01v2",
440		- "disabled": false,
441		- "hidden": false
442		- }
443		-]

Log-Temperature-Sensor-and-send-data-to-node-red.json

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-10.1 KB

Content

...	...	@@ -1,443 +1,0 @@
1		-[
2		- {
3		- "id": "5f10779accc05655",
4		- "type": "tab",
5		- "label": "serial USB",
6		- "disabled": false,
7		- "info": "",
8		- "env": []
9		- },
10		- {
11		- "id": "4ea60ce4df40717c",
12		- "type": "serial in",
13		- "z": "5f10779accc05655",
14		- "name": "",
15		- "serial": "bb1c0e81fd51fa9e",
16		- "x": 210,
17		- "y": 60,
18		- "wires": [
19		- [
20		- "40eac96a52733f7a",
21		- "79722a224bb22c96"
22		- ]
23		- ]
24		- },
25		- {
26		- "id": "fe5a93a52b6adcf1",
27		- "type": "inject",
28		- "z": "5f10779accc05655",
29		- "name": "AT+SEND=1,hello world,0,3",
30		- "props": [
31		- {
32		- "p": "payload"
33		- }
34		- ],
35		- "repeat": "",
36		- "crontab": "",
37		- "once": false,
38		- "onceDelay": 0.1,
39		- "topic": "",
40		- "payload": "AT+SEND=1,hello world,0,3",
41		- "payloadType": "str",
42		- "x": 220,
43		- "y": 260,
44		- "wires": [
45		- [
46		- "3f8add7e2e1d1d17"
47		- ]
48		- ]
49		- },
50		- {
51		- "id": "3f8add7e2e1d1d17",
52		- "type": "serial out",
53		- "z": "5f10779accc05655",
54		- "name": "",
55		- "serial": "bb1c0e81fd51fa9e",
56		- "x": 540,
57		- "y": 260,
58		- "wires": []
59		- },
60		- {
61		- "id": "16e7d3d83d9e9415",
62		- "type": "inject",
63		- "z": "5f10779accc05655",
64		- "name": "",
65		- "props": [
66		- {
67		- "p": "payload"
68		- }
69		- ],
70		- "repeat": "",
71		- "crontab": "",
72		- "once": false,
73		- "onceDelay": 0.1,
74		- "topic": "",
75		- "payload": "ATZ",
76		- "payloadType": "str",
77		- "x": 290,
78		- "y": 320,
79		- "wires": [
80		- [
81		- "3f8add7e2e1d1d17"
82		- ]
83		- ]
84		- },
85		- {
86		- "id": "09ea381519629dae",
87		- "type": "inject",
88		- "z": "5f10779accc05655",
89		- "name": "AT+FRE",
90		- "props": [
91		- {
92		- "p": "payload"
93		- }
94		- ],
95		- "repeat": "",
96		- "crontab": "",
97		- "once": false,
98		- "onceDelay": 0.1,
99		- "topic": "",
100		- "payload": "AT+FRE=868.100,868.100",
101		- "payloadType": "str",
102		- "x": 280,
103		- "y": 380,
104		- "wires": [
105		- [
106		- "3f8add7e2e1d1d17"
107		- ]
108		- ]
109		- },
110		- {
111		- "id": "5167a7f904013ffd",
112		- "type": "inject",
113		- "z": "5f10779accc05655",
114		- "name": "AT+BW",
115		- "props": [
116		- {
117		- "p": "payload"
118		- }
119		- ],
120		- "repeat": "",
121		- "crontab": "",
122		- "once": false,
123		- "onceDelay": 0.1,
124		- "topic": "",
125		- "payload": "AT+BW=0,0",
126		- "payloadType": "str",
127		- "x": 290,
128		- "y": 440,
129		- "wires": [
130		- [
131		- "3f8add7e2e1d1d17"
132		- ]
133		- ]
134		- },
135		- {
136		- "id": "dbe4abbc730c76e6",
137		- "type": "inject",
138		- "z": "5f10779accc05655",
139		- "name": "AT+SF",
140		- "props": [
141		- {
142		- "p": "payload"
143		- }
144		- ],
145		- "repeat": "",
146		- "crontab": "",
147		- "once": false,
148		- "onceDelay": 0.1,
149		- "topic": "",
150		- "payload": "AT+SF=12,12",
151		- "payloadType": "str",
152		- "x": 290,
153		- "y": 500,
154		- "wires": [
155		- [
156		- "3f8add7e2e1d1d17"
157		- ]
158		- ]
159		- },
160		- {
161		- "id": "3be3ab296a75d512",
162		- "type": "inject",
163		- "z": "5f10779accc05655",
164		- "name": "AT+RXMOD",
165		- "props": [
166		- {
167		- "p": "payload"
168		- }
169		- ],
170		- "repeat": "",
171		- "crontab": "",
172		- "once": false,
173		- "onceDelay": 0.1,
174		- "topic": "",
175		- "payload": "AT+RXMOD=65535,2",
176		- "payloadType": "str",
177		- "x": 270,
178		- "y": 560,
179		- "wires": [
180		- [
181		- "3f8add7e2e1d1d17"
182		- ]
183		- ]
184		- },
185		- {
186		- "id": "7a03d1413c60ea1c",
187		- "type": "inject",
188		- "z": "5f10779accc05655",
189		- "name": "AT+SYNCWORD",
190		- "props": [
191		- {
192		- "p": "payload"
193		- }
194		- ],
195		- "repeat": "",
196		- "crontab": "",
197		- "once": false,
198		- "onceDelay": 0.1,
199		- "topic": "",
200		- "payload": "AT+SYNCWORD=0",
201		- "payloadType": "str",
202		- "x": 260,
203		- "y": 620,
204		- "wires": [
205		- [
206		- "3f8add7e2e1d1d17"
207		- ]
208		- ]
209		- },
210		- {
211		- "id": "40eac96a52733f7a",
212		- "type": "function",
213		- "z": "5f10779accc05655",
214		- "name": "function 1",
215		- "func": "var data = msg.payload\nif (data.substring(0, 4) == \"Data\")\n{\n if (data.substring(6, 12) == \"(HEX:)\")\n {\n var temp = data.substring(13, 15) + data.substring(16, 18)\n var hum = data.substring(19, 21) + data.substring(22, 24)\n var temp1 = parseInt(temp, 16)/100\n var hum1 = parseInt(hum, 16)/10\n var a1 = { payload: temp1 }, a2 = { payload: hum1 }\n }\n}\nif (data.substring(0, 4) == \"Rssi\")\n{\n var rssi = data.substring(6)\n var a3 = { payload: rssi }\n}\nreturn [a1,a2,a3];\n \n\n",
216		- "outputs": 3,
217		- "noerr": 0,
218		- "initialize": "",
219		- "finalize": "",
220		- "libs": [],
221		- "x": 420,
222		- "y": 60,
223		- "wires": [
224		- [
225		- "81edb003937f1a92"
226		- ],
227		- [
228		- "c63593404a60d9dc"
229		- ],
230		- [
231		- "61ca71032888887b"
232		- ]
233		- ]
234		- },
235		- {
236		- "id": "61ca71032888887b",
237		- "type": "ui_chart",
238		- "z": "5f10779accc05655",
239		- "name": "",
240		- "group": "ef41b39771110fa5",
241		- "order": 1,
242		- "width": 0,
243		- "height": 0,
244		- "label": "RSSI",
245		- "chartType": "line",
246		- "legend": "false",
247		- "xformat": "dd HH:mm",
248		- "interpolate": "linear",
249		- "nodata": "",
250		- "dot": true,
251		- "ymin": "",
252		- "ymax": "",
253		- "removeOlder": 1,
254		- "removeOlderPoints": "",
255		- "removeOlderUnit": "3600",
256		- "cutout": 0,
257		- "useOneColor": false,
258		- "useUTC": false,
259		- "colors": [
260		- "#1f77b4",
261		- "#aec7e8",
262		- "#ff7f0e",
263		- "#2ca02c",
264		- "#98df8a",
265		- "#d62728",
266		- "#ff9896",
267		- "#9467bd",
268		- "#c5b0d5"
269		- ],
270		- "outputs": 1,
271		- "useDifferentColor": false,
272		- "className": "",
273		- "x": 670,
274		- "y": 180,
275		- "wires": [
276		- []
277		- ]
278		- },
279		- {
280		- "id": "81edb003937f1a92",
281		- "type": "ui_chart",
282		- "z": "5f10779accc05655",
283		- "name": "",
284		- "group": "7e1d1c102cf74e6b",
285		- "order": 1,
286		- "width": 0,
287		- "height": 0,
288		- "label": "Temperature",
289		- "chartType": "line",
290		- "legend": "false",
291		- "xformat": "HH:mm:ss",
292		- "interpolate": "linear",
293		- "nodata": "",
294		- "dot": true,
295		- "ymin": "",
296		- "ymax": "",
297		- "removeOlder": 1,
298		- "removeOlderPoints": "",
299		- "removeOlderUnit": "3600",
300		- "cutout": 0,
301		- "useOneColor": false,
302		- "useUTC": false,
303		- "colors": [
304		- "#1f77b4",
305		- "#aec7e8",
306		- "#ff7f0e",
307		- "#2ca02c",
308		- "#98df8a",
309		- "#d62728",
310		- "#ff9896",
311		- "#9467bd",
312		- "#c5b0d5"
313		- ],
314		- "outputs": 1,
315		- "useDifferentColor": false,
316		- "className": "",
317		- "x": 690,
318		- "y": 100,
319		- "wires": [
320		- []
321		- ]
322		- },
323		- {
324		- "id": "c63593404a60d9dc",
325		- "type": "ui_chart",
326		- "z": "5f10779accc05655",
327		- "name": "",
328		- "group": "3f5d139f158d7c1c",
329		- "order": 2,
330		- "width": 0,
331		- "height": 0,
332		- "label": "Humidity",
333		- "chartType": "line",
334		- "legend": "false",
335		- "xformat": "HH:mm:ss",
336		- "interpolate": "linear",
337		- "nodata": "",
338		- "dot": true,
339		- "ymin": "",
340		- "ymax": "",
341		- "removeOlder": 1,
342		- "removeOlderPoints": "",
343		- "removeOlderUnit": "3600",
344		- "cutout": 0,
345		- "useOneColor": false,
346		- "useUTC": false,
347		- "colors": [
348		- "#1f77b4",
349		- "#aec7e8",
350		- "#ff7f0e",
351		- "#2ca02c",
352		- "#98df8a",
353		- "#d62728",
354		- "#ff9896",
355		- "#9467bd",
356		- "#c5b0d5"
357		- ],
358		- "outputs": 1,
359		- "useDifferentColor": false,
360		- "className": "",
361		- "x": 680,
362		- "y": 140,
363		- "wires": [
364		- []
365		- ]
366		- },
367		- {
368		- "id": "79722a224bb22c96",
369		- "type": "debug",
370		- "z": "5f10779accc05655",
371		- "name": "debug 1",
372		- "active": true,
373		- "tosidebar": true,
374		- "console": false,
375		- "tostatus": false,
376		- "complete": "false",
377		- "statusVal": "",
378		- "statusType": "auto",
379		- "x": 420,
380		- "y": 180,
381		- "wires": []
382		- },
383		- {
384		- "id": "bb1c0e81fd51fa9e",
385		- "type": "serial-port",
386		- "serialport": "/dev/ttyUSB0",
387		- "serialbaud": "9600",
388		- "databits": "8",
389		- "parity": "none",
390		- "stopbits": "1",
391		- "waitfor": "",
392		- "dtr": "none",
393		- "rts": "none",
394		- "cts": "none",
395		- "dsr": "none",
396		- "newline": "\\n",
397		- "bin": "false",
398		- "out": "char",
399		- "addchar": "\\r\\n",
400		- "responsetimeout": "10000"
401		- },
402		- {
403		- "id": "ef41b39771110fa5",
404		- "type": "ui_group",
405		- "name": "rssi",
406		- "tab": "abb98f80600a5448",
407		- "order": 3,
408		- "disp": true,
409		- "width": "6",
410		- "collapse": false,
411		- "className": ""
412		- },
413		- {
414		- "id": "7e1d1c102cf74e6b",
415		- "type": "ui_group",
416		- "name": "TEM",
417		- "tab": "abb98f80600a5448",
418		- "order": 4,
419		- "disp": true,
420		- "width": "6",
421		- "collapse": false,
422		- "className": ""
423		- },
424		- {
425		- "id": "3f5d139f158d7c1c",
426		- "type": "ui_group",
427		- "name": "HUM",
428		- "tab": "abb98f80600a5448",
429		- "order": 2,
430		- "disp": true,
431		- "width": "6",
432		- "collapse": false,
433		- "className": ""
434		- },
435		- {
436		- "id": "abb98f80600a5448",
437		- "type": "ui_tab",
438		- "name": "LG01v2",
439		- "icon": "LG01v2",
440		- "disabled": false,
441		- "hidden": false
442		- }
443		-]

image-20221104155949-6.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-46.0 KB

Content

image-20221108164337-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-17.5 KB

Content

image-20221108164413-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-27.1 KB

Content

image-20221108170314-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-34.6 KB

Content

image-20221108170621-4.jpeg

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-544.6 KB

Content

image-20221108170731-5.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-2.5 MB

Content

image-20221108172149-6.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-17.5 KB

Content

image-20221108172432-7.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-45.9 KB

Content

image-20221108174840-8.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-52.1 KB

Content

image-20221108175113-9.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-72.6 KB

Content

image-20221108180334-10.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-159.3 KB

Content

image-20221108180458-11.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-52.4 KB

Content

image-20221112161031-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-35.1 KB

Content

image-20221112161111-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-34.8 KB

Content

image-20221112162733-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-78.7 KB

Content

image-20221112163119-4.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-32.6 KB

Content

image-20230504095457-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-412.6 KB

Content

image-20230504095502-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-412.6 KB

Content

image-20230504100722-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-21.5 KB

Content

image-20230506110646-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-383.1 KB

Content

image-20230506113332-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-28.6 KB

Content

image-20230506113432-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-36.5 KB

Content

image-20230506113531-4.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-403.2 KB

Content

image-20230506113602-5.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-26.7 KB

Content

image-20230506113623-6.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-35.4 KB

Content

image-20230506113705-7.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-40.9 KB

Content

image-20230506113722-8.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-33.2 KB

Content

image-20230506113737-9.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-25.2 KB

Content

image-20230506113813-10.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-39.5 KB

Content

image-20230506113831-11.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-32.2 KB

Content

image-20230506114127-12.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-56.1 KB

Content

image-20230506115438-13.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-413.6 KB

Content

image-20230620103153-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-127.6 KB

Content

image-20230620103535-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-156.3 KB

Content

image-20230620103923-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-72.7 KB

Content

image-20231014092843-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-596 bytes

Content

image-20231014092934-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-620 bytes

Content

image-20231014092954-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-618 bytes

Content

image-20231014092959-4.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Kilight

Size

...	...	@@ -1,1 +1,0 @@
1		-563 bytes

Content