Last modified by Kilight Cao on 2024/10/12 08:58
<
From version < 143.1 >
edited by Kilight Cao
on 2023/10/14 09:28
To version < 86.1 >
edited by Kilight Cao
on 2022/11/08 17:59
>
Change comment: Uploaded new attachment "Log-Temperature-Sensor-and-send-data-to-node-red.json", version {1}

Summary

Details

Page properties
Content
... ... @@ -11,33 +11,26 @@
11 11  
12 12  {{toc/}}
13 13  
14 += **1. Introduction** =
14 14  
15 15  
17 +== **1.1 What is LG01-V2** ==
16 16  
17 17  
18 -
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LG01v2 ==
22 -
23 -
24 24  (((
25 25  (((
26 -The LG01v2 is an (% style="color:blue" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 -
28 -LG01v2 is specially design for (% style="color:blue" %)**peer to peer LoRa**(%%) protocol instead of LoRaWAN protocol. The LG01v2 use single channel LoRa module to minimize the deployment cost for a private p2p LoRa wireless network.
22 +The LG01-V2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
29 29  )))
30 30  
31 31  (((
32 -LG01v2 uses Open Source Linux system. User can modify the Linux part and develop customize software base on it. It has (% style="color:blue" %)**1.2Ghz Quad-Core CPU**(%%) , (% style="color:blue" %)**4GB eMMC storage**(%%) and (% style="color:blue" %)**512MB RAM**(%%) for most application.
33 -
34 -LG01v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
26 +LG01-V2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
35 35  )))
36 36  
37 37  
38 -== 1.2 Specifications ==
39 39  
31 +== **1.2 Specifications** ==
40 40  
33 +
41 41  (% style="color:#037691" %)**Hardware System:**
42 42  
43 43  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -55,7 +55,7 @@
55 55  * Storage Temperature: -20 ~~ 65°C
56 56  * Power Input: 5V, 2A, DC
57 57  
58 -== 1.3 Features ==
51 +== **1.3 Features** ==
59 59  
60 60  
61 61  * Open Source Debian system
... ... @@ -63,65 +63,69 @@
63 63  * Remote Management
64 64  * Auto-provisioning for batch deployment and management
65 65  * LoRa Gateway
59 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
66 66  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
67 67  
68 -== 1.4 Block Diagram ==
62 +== **1.4 Block Diagram** ==
69 69  
70 70  
71 71  
72 -== 1.5 LED Indicators ==
66 +== **1.5 LED Indicators** ==
73 73  
74 74  
75 75  LG01-V2 has totally four LEDs, They are:
76 76  
77 77  
78 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
72 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
79 79  
80 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
74 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
81 81  
82 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
76 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
83 83  
84 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
78 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
85 85  
86 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
80 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
87 87  
88 - ✓** SOLID RED:** Device doesn't have an Internet connection.
82 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
89 89  
90 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
84 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
91 91  
92 92  
93 -== 1.6 Button Intruction ==
94 94  
88 +== **1.6 Button Intruction** ==
95 95  
90 +
96 96  LG01-V2 has a black toggle button, which is:
97 97  
98 98  
99 -(% style="color:blue" %)**➢ Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
94 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
100 100  
101 - **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
96 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
102 102  
103 103  
104 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
99 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
105 105  
106 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
101 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
107 107  
108 108  
109 -= 2. Quick Start =
110 110  
105 += **2. Quick Start** =
111 111  
107 +
112 112  The LG01-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
113 113  
114 114  In most cases, the first thing you need to do is make the LG01-v2 accessible to the network.
115 115  
116 116  
117 -== 2.1 Access and Configure LG01-v2 ==
113 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
118 118  
119 -=== 2.1.1 Find IP address of LG01-v2 ===
120 120  
116 +== **2.1.1 connect the network.** ==
121 121  
122 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
123 123  
119 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
124 124  
121 +
125 125  Connect the LG01-V2 Ethernet port to your router and LG01-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01-V2.
126 126  
127 127  You can also use this IP to connect.
... ... @@ -129,38 +129,10 @@
129 129  
130 130  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100129-1.png?width=1263&height=332&rev=1.1||alt="image-20220622100129-1.png"]]
131 131  
132 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via LG01v2 Fallback IP ====
133 133  
134 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230107084650-2.png?width=839&height=310&rev=1.1||alt="image-20230107084650-2.png" height="284" width="769"]]
130 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
135 135  
136 136  
137 -**Steps to connect via fallback IP:**
138 -
139 -~1. Connect the PC's Ethernet port to LG01v2's WAN port
140 -
141 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
142 -
143 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
144 -
145 -
146 -As in the below photo:
147 -
148 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413172038-1.png?width=1243&height=732&rev=1.1||alt="image-20230413172038-1.png" height="624" width="1059"]]
149 -
150 -
151 -Configure computer Ethernet port steps video: **[[fallback ip.mp4>>url:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/fallback%20ip.mp4?rev=1.1]]**
152 -
153 -If you still can't access the LG01v2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/LG01v2/#H10.1A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
154 -
155 -3. In the PC, use IP address 172.31.255.254 to access the LG01v2 via Web or Console.
156 -
157 -[[image:image-20230506115438-13.png||height="554" width="1047"]]
158 -
159 -
160 -
161 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ====
162 -
163 -
164 164  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100542-2.png?width=1256&height=369&rev=1.1||alt="image-20220622100542-2.png"]]
165 165  
166 166  
... ... @@ -167,111 +167,74 @@
167 167  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
168 168  
169 169  
170 -[[image:image-20230506113332-2.png]]
139 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102702-6.png?rev=1.1||alt="image-20220622102702-6.png"]]
171 171  
172 172  
173 173  **Wi-Fi configuration successful**
174 174  
175 175  
176 -[[image:image-20230506113432-3.png||height="397" width="855"]]
145 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102847-7.png?rev=1.1||alt="image-20220622102847-7.png"]]
177 177  
178 178  
179 -=== 2.1.2 Access Configure Web UI ===
180 180  
149 += **3. Web Configure Pages** =
181 181  
182 -**Web Interface**
151 +== **3.1 Home** ==
183 183  
184 -Open a browser on the PC and type the LG01v2 ip address (depends on your connect method)
153 +//Shows the system running status~://
185 185  
155 +[[image:image-20221104155612-1.png||height="497" width="942"]]
186 186  
187 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
188 188  
189 -You will see the login interface of LG01v2 as shown below.
158 +== **3.2 Network Settings** ==
190 190  
191 -The account details for Web Login are:
192 192  
193 -(% style="color:#4f81bd" %)**User Name: root**
161 +=== **3.2.1 Network ~-~-> WiFi** ===
194 194  
195 -(% style="color:#4f81bd" %)**Password:   dragino**
196 196  
197 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230106153501-1.png?width=894&height=367&rev=1.1||alt="image-20230106153501-1.png"]]
164 +[[image:image-20221104155654-2.png||height="319" width="813"]]
198 198  
199 199  
200 -= 3. Web Configure Pages =
201 201  
202 -== 3.1 Home ==
168 +=== **3.4.2 Network ~-~-> System Status** ===
203 203  
204 204  
205 -Shows the system running status:
171 +[[image:image-20221104155724-3.png||height="679" width="861"]]
206 206  
207 -[[image:image-20230506113531-4.png||height="430" width="818"]]
208 208  
209 209  
210 -== 3.2 Network Settings ==
175 +=== **3.4.3 Network ~-~-> Firewall** ===
211 211  
212 -=== 3.2.1 Network ~-~-> WiFi ===
213 213  
178 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616115351-6.png?width=661&height=244&rev=1.1||alt="image-20220616115351-6.png"]]
214 214  
215 -[[image:image-20230506113602-5.png]]
216 216  
217 217  
218 -=== 3.4.2 Network ~-~-> System Status ===
182 +== **3.5 System** ==
219 219  
220 220  
221 -[[image:image-20230506113623-6.png||height="511" width="672"]]
185 +=== **3.5.1  System ~-~-> System Overview** ===
222 222  
223 223  
224 -== 3.5 System ==
225 -
226 -=== 3.5.1  System ~-~-> System Overview ===
227 -
228 -
229 229  Shows the system info:
230 230  
231 -[[image:image-20230506113705-7.png]]
190 +[[image:image-20221104155907-4.png]]
232 232  
233 233  
234 -=== 3.5.2 System ~-~-> Backup/Restore ===
235 235  
194 +=== **3.5.2 System ~-~-> Backup/Restore** ===
236 236  
237 -[[image:image-20230506113722-8.png||height="254" width="797"]]
238 238  
197 +[[image:image-20221104155928-5.png||height="334" width="880"]]
239 239  
240 -=== 3.5.3 System ~-~-> System General ===
241 241  
200 += (% id="cke_bm_1978S" style="display:none" %)** **(%%)**4. Build in Server** =
242 242  
243 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
244 244  
245 -In addition, Users can customize the FallBack IP address.
246 -
247 -[[image:image-20230506113813-10.png||height="659" width="749"]]
248 -
249 -
250 -=== 3.5.4 System ~-~-> Remoteit ===
251 -
252 -
253 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
254 -
255 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
256 -
257 -[[image:image-20230506113831-11.png||height="567" width="748"]]
258 -
259 -
260 -=== 3.5.5 System ~-~-> Package Management ===
261 -
262 -
263 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
264 -
265 -[[image:image-20230506114127-12.png||height="803" width="762"]]
266 -
267 -
268 -= (% id="cke_bm_1978S" style="display:none" %) (%%)4. Build in Server =
269 -
270 -
271 271  The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
272 272  
273 273  
274 -[[image:image-20230506113737-9.png]]
206 +[[image:image-20221104155949-6.png||height="315" width="1023"]]
275 275  
276 276  
277 277  (% style="color:red" %)**Note:**
... ... @@ -279,16 +279,18 @@
279 279   **Path**: System ~-~-> Built-in Server
280 280  
281 281  
282 -(% style="color:blue" %)**Troubleshooting：**
214 +**Troubleshooting:**
283 283  
216 +
284 284  **~ 1. URL does not jump properly**
285 285  
286 286   For the Node-Red, you can use the local IP address and the port is 1880 to access it.
287 287  
288 288  
289 -== 4.1 Application Server ~-~- Node-Red ==
290 290  
223 +== **4.1 Application Server ~-~- Node-Red** ==
291 291  
225 +
292 292  You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
293 293  
294 294  
... ... @@ -298,24 +298,12 @@
298 298  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
299 299  
300 300  
301 -= 5. How to configure the Lora Gateway =
235 += **5. How to configure the Lora Gateway** =
302 302  
303 -== 5.1 Configure and Debug LoRa wireless of LG01v2 ==
304 304  
238 +== **5.1 Access the Lora configuration page** ==
305 305  
306 -First, the user needs to access the Linux console of LG01v2 via ssh
307 307  
308 -**IP address:  (% style="color:blue" %)IP address of LG01v2(%%)**
309 -
310 -**Port:  (% style="color:blue" %)22(%%)**
311 -
312 -**User Name:   (% style="color:blue" %)root(%%)**
313 -
314 -**Password:  (% style="color:blue" %)dragino(default)(%%)**
315 -
316 -[[image:image-20230504100722-3.png||height="228" width="908"]]
317 -
318 -
319 319  Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**:
320 320  
321 321  (% class="box infomessage" %)
... ... @@ -336,9 +336,7 @@
336 336  )))
337 337  
338 338  
339 -(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**
340 -
341 -
261 +(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**(%%)
342 342  (% style="color:red" %)[[image:image-20221029174703-3.png]]
343 343  
344 344  
... ... @@ -347,44 +347,56 @@
347 347  
348 348  (% class="box infomessage" %)
349 349  (((
350 -**AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
351 -AT+GROUPMOD=0,0  ~-~-->  TX and RX group
352 -AT+BW=0,0  ~-~-->  TX and RX Bandwidth
353 -AT+SF=12,12  ~-~-->  TX and RX Spreading Factor
354 -AT+POWER=14  ~-~-->  TX Power Range
355 -AT+CRC=1,1  ~-~-->  TX and RX CRC Type
356 -AT+HEADER=0,0  ~-~-->  TX and RX Header Type
357 -AT+CR=1,1  ~-~-->  TX and RX Coding Rate
358 -AT+IQ=0,0  ~-~-->  TX and RX InvertIQ
359 -AT+PREAMBLE=8,8  ~-~-->  TX and RX Preamble Length
360 -AT+SYNCWORD=0  ~-~-->  Syncword(0: private，1: public)
361 -AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
362 -AT+RXDAFORM=1**                              
270 +AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
271 +AT+GROUPMOD=0,0  ~-~--> TX and RX group
272 +AT+BW=0,0  ~-~--> TX and RX Bandwidth
273 +AT+SF=12,12  ~-~--> TX and RX Spreading Factor
274 +AT+POWER=14  ~-~--> TX Power Range
275 +AT+CRC=1,1  ~-~--> TX and RX CRC Type
276 +AT+HEADER=0,0  ~-~--> TX and RX Header Type
277 +AT+CR=1,1  ~-~--> TX and RX Coding Rate
278 +AT+IQ=0,0  ~-~--> TX and RX InvertIQ
279 +AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length
280 +AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
281 +AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
282 +AT+RXDAFORM=1                              
363 363  )))
364 364  
365 365  
366 -== 5.2 Example: LG01v2 ==
286 +== **5.2 Example: LG01**-**V2 Peer-to-Peer** ==
367 367  
368 -=== 5.2.1 Introduce for the example: ===
369 369  
370 -
371 371  [[image:image-20221104102736-3.png||height="282" width="723"]]
372 372  
373 373  
374 -In this example, there are two devices:
292 +The user can run the AT command to set the LG01-V2 RX window always open as a Receiver, The LG01-V2 can display the received data in the built-in server Node-Red, Here are the specific steps:
375 375  
376 -* **LA66 Shield + UNO + DHT11**: The UNO will get the temperature and humidity and broadcast the value via LoRa protocol.
377 -* **LG01v2** : LG01v2 is set to listening the LoRa Channel which LA66 is broadcasting. When LG01v2 get the data from LA66, LG01v2 will plot the data in built-in IoT server.
294 +(% style="color:red" %)**Prerequisites: **(%%)The configuration of LG01-V2 and  LA66 Shield must match and the LA66 Shield firmware is **[[LA66 Peer-to-Peer firmware>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]**, users can use **AT+CFG** to check all configurations.
378 378  
379 -=== 5.2.2 Set Up LA66 Shield + UNO ===
380 380  
297 +=== **Log Temperature Sensor(DHT11) and send data to LG01v2, show it in Node-RED.** ===
381 381  
382 -==== **Set up LA66 Module** ====
383 383  
300 +(% style="color:red; font-weight:bold" %)**LG01-V**(% style="color:red" %)**2 as Receiver: (configured as AT+RXMOD=65535,2)**
384 384  
385 -LA66 Module is loaded with the firmware **[[LA66 Peer-to-Peer firmware>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]] **and user can use AT Command to set up LA66 with below parameters:
386 -
302 +(% class="box infomessage" %)
387 387  (((
304 +**LG01-V2 configuration:**
305 +
306 +AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
307 +AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
308 +AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
309 +AT+POWER=14  ~-~--> TX Power Range set: 14dBm
310 +AT+CRC=1,1  ~-~--> TX and RX CRC Type
311 +AT+HEADER=0,0  ~-~--> TX and RX Header Type
312 +AT+CR=1,1  ~-~--> TX and RX Coding Rate
313 +AT+IQ=0,0  ~-~--> TX and RX InvertIQ
314 +AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
315 +AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
316 +AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode, RX window always open
317 +)))
318 +
319 +
388 388  (% style="color:red" %)**LA66 Shield as Sender: **
389 389  
390 390  (% class="box infomessage" %)
... ... @@ -406,11 +406,18 @@
406 406  )))
407 407  
408 408  
341 +After the above configuration is complete, users can send test simulation data to check whether the configuration is correct, In LA66 sheild serial console send:(% style="color:red" %)**(AT+SEND=1,hello world,2,3).**
409 409  
410 -==== **Set up Arduino UNO** ====
343 +When LG01-V2 replies with ACK when it receives a packet sent by LA66 sheild.
411 411  
412 -(% id="cke_bm_1033249S" style="display:none" %)** **
345 +[[image:image-20221108164413-2.png]]shield
413 413  
347 +
348 +In the real-time log of LG01-V2：
349 +
350 +[[image:image-20221108170314-3.png]]
351 +
352 +
414 414  **Hardware Connection**
415 415  
416 416  (% class="box infomessage" %)
... ... @@ -425,118 +425,74 @@
425 425  [[image:image-20221108170731-5.png||height="588" width="441"]]
426 426  
427 427  
367 +**1.  open Arduino IDE**
428 428  
429 -===== **1. Open Arduino IDE** =====
430 -
431 -
432 432  [[image:image-20221108172149-6.png||height="650" width="542"]]
433 433  
434 434  
372 +**2.  Open project**
435 435  
436 -===== **2. Open project** =====
437 -
438 -
439 439  Users can download Arduino files from this link: [[attach:Log-Temperature-Sensor-and-send-data-to-Node-red.ino||target="_blank"]]
440 440  
441 -Then click Compile and Upload to LA66 Shield,
376 +Then click Compile and Upload to LA66 Shield,
442 442  
443 443  [[image:image-20221108172432-7.png]]
444 444  
445 445  
381 +3.
446 446  
447 -===== **3. Open the Serial Monitor to check the LA66 Shield data** =====
383 +The LA66 Shield reads the temperature and humidity data from the sensor and sends it to LG01V2,
448 448  
385 +Users can import this example in node-red:
449 449  
450 -The UNO will now reads the temperature and humidity data from the sensor and broadcast it via LoRa wireless,
451 451  
452 -[[image:image-20221108174840-8.png||height="731" width="671"]]
453 453  
389 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**-V(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
454 454  
455 455  
456 -Sending out data as below.
392 +(% style="color:blue" %)**USB TTL to LG01-V2  Connection:**
457 457  
458 -[[image:image-20221108175113-9.png||height="556" width="998"]]
459 459  
395 +Port 1 of the UART on the LG01-V2 is GND
460 460  
461 -=== 5.2.3 Set Up LG01v2 ===
462 -
463 -
464 -Configure LG01v2 LoRa channel parameters so it can get data from LA66 Shield
465 -
466 -(% style="color:red; font-weight:bold" %)**LG01v**(% style="color:red" %)**2 as Receiver: (configured as AT+RXMOD=65535,2)**
467 -
468 468  (% class="box infomessage" %)
469 469  (((
470 -**LG01-V2 configuration:**
399 +**TXD  <~-~--> UART RXD (Gray line)**
471 471  
472 -AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
473 -AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
474 -AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
475 -AT+POWER=14  ~-~--> TX Power Range set: 14dBm
476 -AT+CRC=1,1  ~-~--> TX and RX CRC Type
477 -AT+HEADER=0,0  ~-~--> TX and RX Header Type
478 -AT+CR=1,1  ~-~--> TX and RX Coding Rate
479 -AT+IQ=0,0  ~-~--> TX and RX InvertIQ
480 -AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
481 -AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
482 -AT+RXMOD=65535,2  ~-~-->  Rx Timeout and Reply mode, RX window always open**(0:No ACK, 1:Reply mode, 2:Send an ACK once got a message from another device. ACK Content is 0x00 FF )**
483 -)))
401 +**RXD  <~-~--> UART TXD (White line)**
484 484  
485 -
486 -=== 5.2.4 Test result ===
487 -
488 -
489 -After the above configuration is complete, users can send test simulation data to check whether the configuration is correct, In LA66 sheild serial console send:(% style="color:red" %)**(AT+SEND=1,hello world,2,3).**
403 +**GND <~-~--> GND (Black line)**
490 490  )))
491 491  
492 -When LG01v2 replies with ACK when it receives a packet sent by LA66 sheild.
493 493  
494 -[[image:image-20221108164413-2.png]]
407 +**LG01-V2 UART connection photo**
495 495  
409 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
496 496  
497 497  
498 -In the real-time log of LG01v2：
499 499  
500 -[[image:image-20221108170314-3.png]]
413 +In the PC, you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LG01v2. LG01v2 will output system info once power on as below:
501 501  
502 502  
503 -=== 5.2.5 Plot data chart in LG01v2 ===
416 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
504 504  
418 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
505 505  
506 -User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
507 507  
508 -User can import this example in Node-Red: [[attach:Log-Temperature-Sensor-and-send-data-to-Node-red.json||target="_blank"]]
421 += **7. FAQ** =
509 509  
510 -[[image:image-20221108180334-10.png||height="651" width="1141"]]
511 511  
424 +== **7.1 How does LG01-V2 communicate with Lora shield (LoRa.h)** ==
512 512  
513 -The temperature and humidity chart is displayed in the built-in node-red UI
514 514  
515 -**Browser input: (% style="background-color:yellow" %)__//http:~/~/<local-IPV4-address>//__(%%)**
427 +This example describes how to use LG01-V2, LoRa Shield to set up a LoRa network
516 516  
517 -[[image:image-20221108180458-11.png||height="402" width="1137"]]
518 -
519 -
520 -
521 -= 6. OTA System Update =
522 -
523 -
524 -LG01v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
525 -
526 -
527 -= 7. FAQ =
528 -
529 -== 7.1 How does LG01v2 communicate with Lora shield (LoRa.h) ==
530 -
531 -
532 -This example describes how to use LG01v2, LoRa Shield to set up a LoRa network,
533 -
534 534  [[image:image-20221103152238-8.png||height="251" width="654"]]
535 535  
536 536  
537 -(% style="color:red" %)**Prerequisites: The configurations of LG01v2 and Lora shield must match**
432 +(% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
538 538  
539 -**LG01v2 configuration:**
434 +**LG01-V2 configuration:**
540 540  
541 541  (% class="box infomessage" %)
542 542  (((
... ... @@ -554,8 +554,6 @@
554 554  AT+RXDAFORM=1    
555 555  )))
556 556  
557 -
558 -
559 559  **Lora shield configuration:**
560 560  
561 561  Lora Shield example: [[attach:LoRa_Shield_Sketch_For_MQTT.ino||target="_blank"]] , [[attach:arduino-LoRa-master.zip||target="_blank"]]
... ... @@ -563,195 +563,65 @@
563 563  [[image:image-20221101161318-2.png]]
564 564  
565 565  
459 +**Test LG01-V2 to receive Lora Shield data:**
566 566  
567 -**Test LG01v2 to receive Lora Shield data:**
568 -
569 569  [[image:image-20221101161951-3.png]]
570 570  
571 571  
464 +**Test the LG01-V2 to send data:**
572 572  
573 -**Test the LG01v2 to send data:**
574 -
575 575  [[image:image-20221101162527-4.png]]
576 576  
577 577  
578 -== 7.2 How does LG01v2 communicate with Heltec LoRa Node ==
469 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
579 579  
580 580  
581 -This example describes how to use LG01v2 and Heltec LoRa Node to set up a LoRa network,
582 -
583 -[[image:image-20221112161111-2.png||height="258" width="692"]]
584 -
585 -(% style="color:red" %)**Prerequisites: The configurations of LG01v2 and Lora shield must match**
586 -
587 -
588 -**LG01v2 configuration:**
589 -
590 -(% class="box infomessage" %)
591 591  (((
592 -AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
593 -AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
594 -AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
595 -AT+POWER=14  ~-~--> TX Power Range
596 -AT+CRC=1,1  ~-~--> TX and RX CRC Type
597 -AT+HEADER=0,0  ~-~--> TX and RX Header Type
598 -AT+CR=1,1  ~-~--> TX and RX Coding Rate
599 -AT+IQ=0,0  ~-~--> TX and RX InvertIQ
600 -AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
601 -AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
602 -AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode,RX window always open
603 -AT+RXDAFORM=1  ~-~--> RX data format**（0: Hex ,1: String）**
473 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
604 604  )))
605 605  
606 -
607 -After we upload the sketch to Heltec LoRa Node, we can see below output from Arduino.
608 -
609 -Lora Shield example: [[attach:LoRa_send_trial.ino||target="_blank"]]
610 -
611 -[[image:image-20221112162733-3.png||height="524" width="927"]]
612 -
613 -
614 -And we can see the logread of gateway as below, means the packet arrive gateway:
615 -
616 -[[image:image-20221112163119-4.png||height="808" width="560"]]
617 -
618 -
619 -== 7.3 How does LG01v2 communicate with LoRaWAN node ==
620 -
621 -
622 -This example describes how to use LG01v2 and LSN50 to set up a  network,
623 -
624 -In this case, users need to set LSN50 to work in ABP mode and transmit in only one frequency.
625 -
626 -Assume we have a LG01v2 working in the frequency 868100000 now, below is the steps.
627 -
628 -
629 -**Step1: **Configure the LG01v2
630 -
631 -(% class="box infomessage" %)
632 632  (((
633 -AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
634 -AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
635 -AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
636 -AT+SYNCWORD=1  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
637 -)))
477 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
638 638  
639 -**Step2:  **Run AT commands to make the LSN50 work in Single frequency and ABP mode. Below are the AT commands:
640 640  
641 -(% class="box infomessage" %)
642 -(((
643 -AT+FDR  ~-~--> Reset Parameters to Factory Default, Keys Reserve
644 -AT+NJM=0  ~-~-->  Set to ABP mode
645 -AT+ADR=0  ~-~-->  Set the Adaptive Data Rate Off
646 -AT+DR=0  ~-~--> Set Data Rate (Set AT+DR=3 for 915 band)
647 -AT+TDC=300000  ~-~-->  Set transmit interval to 5 minutes
648 -AT+CHS=868100000  ~-~--> Set transmit frequency to 868.1Mhz
649 -AT+DADDR=FFFFF111  ~-~--> Set Device Address to 26 01 1A F1
650 -ATZ  ~-~--> Reset MCU
651 -)))
652 652  
653 -**Step3:  **Check result
481 += **9. Reference** =
654 654  
655 655  
484 +* Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
485 +* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
656 656  
657 -User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
658 -
659 -User can import this example in Node-Red: [[attach:LG01v2_LSN50v2_S31.json||target="_blank"]]
660 -
661 -
662 -First the user needs to fill in the NwkSkey and AppSkey in the LoraWan Packet Decrypter node.
663 -
664 -[[image:image-20230620103535-2.png||height="591" width="1138"]]
665 -
666 -[[image:image-20230620103153-1.png||height="610" width="1141"]]
667 -
668 -
669 -The data will be displayed in the built-in node-red UI
670 -
671 -**Browser input: (% style="background-color:yellow" %)__//http:~/~/<local-IPV4-address>//__(%%)**
672 -
673 -[[image:image-20230620103923-3.png||height="476" width="1138"]]
674 -
675 -
676 -== 7.4 How can users factory reset LG01v2 ==
677 -
678 -
679 -Users can download the image of LG01v2 from this link：[[dragino-lg01v2-1.7-0210>>https://www.dropbox.com/scl/fi/g0si61lcrvdjyto4ma951/dragino-lg01v2-1.7-0210.zip?rlkey=t03oqo493r2p7ign488rs2jsv&dl=0]]
680 -
681 -
682 -Then follow the steps in the link below to restore factory Settings to LG01v2：
683 -
684 -[[How to flash a new image(OS) to the gateway>>url:https://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
685 -
686 -
687 -= 8. Trouble Shooting =
688 -
689 -== 8.1  Fallback IP does not work, how can users check ==
690 -
691 -
692 -When the computer has completed the above fallback IP configuration,the LG01v2 Web UI is still not accessible via fallback IP.
693 -
694 -
695 -**1.Check whether the configuration is correct**
696 -
697 -Run the CMD command to ipconfig and ping 172.31.255.254.
698 -
699 -If this fails, the user needs to reconfigure.
700 -
701 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413170224-3.png?width=707&height=433&rev=1.1||alt="image-20230413170224-3.png"]]
702 -
703 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413170246-4.png?rev=1.1||alt="image-20230413170246-4.png"]]
704 -
705 -
706 -**2. Check whether the firewall is disabled**
707 -
708 -If the firewall is not down, this will affect access to the gateway.
709 -
710 -
711 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
712 -
713 -
714 -(((
715 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
716 -)))
717 -
718 -(((
719 -With your question as detailed as possible. We will reply and help you in the shortest.
720 -
721 -
722 -= 10. Reference =
723 -
724 -
725 -* Install Tago Core: Refer **Install Tago Core in LG01v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
726 -
727 -* [[Advance OS Reference Guide for L>>doc:Main.Armbian OS instruction.WebHome]]G01v2.
728 -
729 729  
730 730  )))
731 731  
732 -= 11. Order Info =
490 += **10. Order Info** =
733 733  
734 734  
735 -(% style="color:#0000ff" %)**LG01v2-XXX-YYY**
493 +(% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
736 736  
737 737  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
738 738  
739 -* (% style="color:red" %)**868**(%%): For frequency : 863 ~~ 870Mhz
740 -* (% style="color:red" %)**915**(%%): For frequency : 902 ~~ 928Mhz
497 +* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
498 +* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
499 +* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
500 +* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
501 +* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
502 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
741 741  
742 742  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
743 743  
744 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
745 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America: Verizon, AT&T(FirstNet), U.S.Cellular; Canada: Telus
746 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
747 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
506 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
507 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
508 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
509 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
748 748  
749 749  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
750 750  
751 751  
752 -= 12. Manufacturer Info =
753 753  
515 += **10. Manufacturer Info** =
754 754  
517 +
755 755  **Shenzhen Dragino Technology Development co. LTD**
756 756  
757 757  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -759,9 +759,10 @@
759 759  LongCheng Street, LongGang District ; Shenzhen 518116,China
760 760  
761 761  
762 -= 13. FCC Warning =
763 763  
526 += **11. FCC Warning** =
764 764  
528 +
765 765  (((
766 766  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
767 767  )))
... ... @@ -791,6 +791,7 @@
791 791  (((
792 792  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
793 793  
794 -
795 795  
796 796  )))
560 +
561 +~)~)~)
LG01v2_LSN50v2_S31.json
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -16.5 KB
Content
... ... @@ -1,587 +1,0 @@
1 -[
2 - {
3 - "id": "5e07f5eeeb2a969b",
4 - "type": "tab",
5 - "label": "流程 1",
6 - "disabled": false,
7 - "info": "",
8 - "env": []
9 - },
10 - {
11 - "id": "9c26fa2f19e2b556",
12 - "type": "function",
13 - "z": "5e07f5eeeb2a969b",
14 - "name": "hex to base64",
15 - "func": "var input = msg.payload;\nvar base64 = Buffer.from(input, 'hex').toString('base64');\nmsg.payload = base64;\nreturn msg;",
16 - "outputs": 1,
17 - "noerr": 0,
18 - "initialize": "",
19 - "finalize": "",
20 - "libs": [],
21 - "x": 220,
22 - "y": 160,
23 - "wires": [
24 - [
25 - "075bc9172a4c6570",
26 - "3601a98894805fbe"
27 - ]
28 - ]
29 - },
30 - {
31 - "id": "ee0480c81e66d657",
32 - "type": "function",
33 - "z": "5e07f5eeeb2a969b",
34 - "name": "function 4",
35 - "func": "var bytes = msg.payload[\"uplink_message\"]\nvar data = msg.payload[\"out\"]\nvar mode = (parseInt(data.substring(12, 14), 16) & 0x7C) >> 2;\nif (mode != 2)\n{\nvar bat = (parseInt(data.substring(0,4),16)&0x3FFF)/1000;\nvar TempC1 = (parseFloat(parseInt(data.substring(4, 8),16)/10).toFixed(2));\nvar ADC_CH0V = (parseInt(data.substring(8, 12), 16) ) / 1000;\nvar Digital_IStatus = (parseInt((data.substring(8, 12),16) & 0x02))?\"H\":\"L\"; \n\nif (mode != 6) {\n\n var EXTI_Trigger = ((parseInt(data.substring(12, 14), 16) & 0x01))? \"TRUE\" : \"FALSE\";\n\n var Door_status = ((parseInt(data.substring(12, 14), 16) & 0x80))? \"CLOSE\" : \"OPEN\";\n\n}\n}\nif (mode == 0) {\n\n var Work_mode = \"IIC\";\n\n if ((parseInt(data.substring(18, 22), 16)) == 0){\n\n var Illum = (parseInt(data.substring(8, 12), 16));\n\n }\n\n else {\n\n var TempC_SHT = parseFloat(((parseInt(data.substring(14, 18), 16)) / 10).toFixed(2));\n\n var Hum_SHT = parseFloat((((parseInt(data.substring(18, 22), 16))) / 10).toFixed(1));\n\n }\n \n}\n\nelse if (mode == 1) {\n\n var Work_mode = \" Distance\";\n\n var Distance_cm = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(1));\n\n if (((parseInt(data.substring(18, 22), 16))) != 65535){\n\n var Distance_signal_strength = parseFloat(((parseInt(data.substring(18, 22), 16))).toFixed(0));\n\n }\n\n}\n\nelse if (mode == 2) {\n\n var Work_mode = \" 3ADC\";\n\n var BatV = (parseInt(data.substring(18, 22), 16)) / 10;\n\n var ADC_CH0V = ((parseInt(data.substring(0, 4), 16))) / 1000;\n\n var ADC_CH1V = ((parseInt(data.substring(4, 8), 16))) / 1000;\n\n var ADC_CH4V = ((parseInt(data.substring(8, 12), 16))) / 1000;\n\n var Digital_IStatus = ((parseInt(data.substring(12, 14), 16)) & 0x02) ? \"H\" : \"L\";\n\n var EXTI_Trigger = ((parseInt(data.substring(12, 14), 16)) & 0x01) ? \"TRUE\" : \"FALSE\";\n\n var Door_status = ((parseInt(data.substring(13, 14), 16)) & 0x80) ? \"CLOSE\" : \"OPEN\";\n\n if ((parseInt(data.substring(18, 22), 16) === 0)) {\n\n var Illum = ((parseInt(data.substring(14, 18), 16)));\n\n }\n\n else {\n\n var TempC_SHT = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(2));\n\n var Hum_SHT = parseFloat((((parseInt(data.substring(18, 24), 16))) / 10).toFixed(1));\n\n }\n\n}\n\nelse if (mode == 3) {\n\n var Work_mode = \"3DS18B20\";\n\n var TempC2 = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(2));\n\n var TempC3 = parseFloat((((parseInt(data.substring(18, 24), 16))) / 10).toFixed(1));\n\n\n\n}\n\nelse if (mode == 4) {\n\n var Work_mode = \"Weight\";\n\n var Weight = ((parseInt(data.substring(14, 18), 16)));\n\n}\n\nelse if (mode == 5) {\n\n var Work_mode = \"Count\";\n\n var Count = ((parseInt(data.substring(14, 22), 16)));\n\n}\n\n\n\nvar b = { payload: bat }, c = { payload: TempC1 }, d = { payload: ADC_CH0V }, e = { payload: Digital_IStatus }, f = { payload: EXTI_Trigger }, g = { payload: Door_status }, j = { payload: TempC_SHT }, s = { payload: Hum_SHT }, k = { payload: Work_mode };\nreturn [b,c,d,e,f,g,j,k,s];",
36 - "outputs": 9,
37 - "noerr": 0,
38 - "initialize": "",
39 - "finalize": "",
40 - "libs": [],
41 - "x": 660,
42 - "y": 300,
43 - "wires": [
44 - [
45 - "fd22b92d2b8de0fb"
46 - ],
47 - [
48 - "3307256a4e1ea53a"
49 - ],
50 - [
51 - "a3fd8302ec399e31"
52 - ],
53 - [
54 - "c7d1f63ff5f0026a"
55 - ],
56 - [
57 - "159967056da52706"
58 - ],
59 - [
60 - "a21581a41adc1714"
61 - ],
62 - [
63 - "7bb78b78445ac9e3"
64 - ],
65 - [
66 - "0364752170ed6228"
67 - ],
68 - [
69 - "65293155d71d54b9"
70 - ]
71 - ]
72 - },
73 - {
74 - "id": "e763b293d42dbdd5",
75 - "type": "change",
76 - "z": "5e07f5eeeb2a969b",
77 - "name": "",
78 - "rules": [
79 - {
80 - "t": "change",
81 - "p": "payload",
82 - "pt": "msg",
83 - "from": "Data: (HEX:)",
84 - "fromt": "str",
85 - "to": "",
86 - "tot": "str"
87 - },
88 - {
89 - "t": "change",
90 - "p": "payload",
91 - "pt": "msg",
92 - "from": " ",
93 - "fromt": "str",
94 - "to": "",
95 - "tot": "str"
96 - }
97 - ],
98 - "action": "",
99 - "property": "",
100 - "from": "",
101 - "to": "",
102 - "reg": false,
103 - "x": 420,
104 - "y": 60,
105 - "wires": [
106 - [
107 - "9c26fa2f19e2b556",
108 - "416a930e89291528"
109 - ]
110 - ]
111 - },
112 - {
113 - "id": "075bc9172a4c6570",
114 - "type": "lorawan-packet-decrypt-nwkey-appkey",
115 - "z": "5e07f5eeeb2a969b",
116 - "name": "FFFFF111",
117 - "nsw": "CCFFFFFFFFFFFFFFFFFFFFFFFFFFFFAA",
118 - "asw": "FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCC",
119 - "x": 510,
120 - "y": 160,
121 - "wires": [
122 - [
123 - "ee0480c81e66d657"
124 - ]
125 - ]
126 - },
127 - {
128 - "id": "13dc77a4e2bb4f72",
129 - "type": "serial in",
130 - "z": "5e07f5eeeb2a969b",
131 - "name": "",
132 - "serial": "bb1c0e81fd51fa9e",
133 - "x": 190,
134 - "y": 60,
135 - "wires": [
136 - [
137 - "e763b293d42dbdd5"
138 - ]
139 - ]
140 - },
141 - {
142 - "id": "3307256a4e1ea53a",
143 - "type": "ui_chart",
144 - "z": "5e07f5eeeb2a969b",
145 - "name": "",
146 - "group": "c1fddd37879528e5",
147 - "order": 1,
148 - "width": 0,
149 - "height": 0,
150 - "label": "TempC1",
151 - "chartType": "line",
152 - "legend": "false",
153 - "xformat": "HH:mm:ss",
154 - "interpolate": "linear",
155 - "nodata": "",
156 - "dot": false,
157 - "ymin": "",
158 - "ymax": "",
159 - "removeOlder": 1,
160 - "removeOlderPoints": "",
161 - "removeOlderUnit": "3600",
162 - "cutout": 0,
163 - "useOneColor": false,
164 - "useUTC": false,
165 - "colors": [
166 - "#1f77b4",
167 - "#aec7e8",
168 - "#ff7f0e",
169 - "#2ca02c",
170 - "#98df8a",
171 - "#d62728",
172 - "#ff9896",
173 - "#9467bd",
174 - "#c5b0d5"
175 - ],
176 - "outputs": 1,
177 - "useDifferentColor": false,
178 - "className": "",
179 - "x": 940,
180 - "y": 160,
181 - "wires": [
182 - []
183 - ]
184 - },
185 - {
186 - "id": "a3fd8302ec399e31",
187 - "type": "ui_chart",
188 - "z": "5e07f5eeeb2a969b",
189 - "name": "",
190 - "group": "6d46fdae9f413f7b",
191 - "order": 1,
192 - "width": 0,
193 - "height": 0,
194 - "label": "ADC_CH0V",
195 - "chartType": "line",
196 - "legend": "false",
197 - "xformat": "HH:mm:ss",
198 - "interpolate": "linear",
199 - "nodata": "",
200 - "dot": false,
201 - "ymin": "",
202 - "ymax": "",
203 - "removeOlder": 1,
204 - "removeOlderPoints": "",
205 - "removeOlderUnit": "3600",
206 - "cutout": 0,
207 - "useOneColor": false,
208 - "useUTC": false,
209 - "colors": [
210 - "#1f77b4",
211 - "#aec7e8",
212 - "#ff7f0e",
213 - "#2ca02c",
214 - "#98df8a",
215 - "#d62728",
216 - "#ff9896",
217 - "#9467bd",
218 - "#c5b0d5"
219 - ],
220 - "outputs": 1,
221 - "useDifferentColor": false,
222 - "className": "",
223 - "x": 950,
224 - "y": 200,
225 - "wires": [
226 - []
227 - ]
228 - },
229 - {
230 - "id": "fd22b92d2b8de0fb",
231 - "type": "ui_chart",
232 - "z": "5e07f5eeeb2a969b",
233 - "name": "",
234 - "group": "bb5657c2a8c290a3",
235 - "order": 1,
236 - "width": 0,
237 - "height": 0,
238 - "label": "BatV",
239 - "chartType": "line",
240 - "legend": "false",
241 - "xformat": "HH:mm:ss",
242 - "interpolate": "linear",
243 - "nodata": "",
244 - "dot": false,
245 - "ymin": "",
246 - "ymax": "",
247 - "removeOlder": 1,
248 - "removeOlderPoints": "",
249 - "removeOlderUnit": "3600",
250 - "cutout": 0,
251 - "useOneColor": false,
252 - "useUTC": false,
253 - "colors": [
254 - "#1f77b4",
255 - "#aec7e8",
256 - "#ff7f0e",
257 - "#2ca02c",
258 - "#98df8a",
259 - "#d62728",
260 - "#ff9896",
261 - "#9467bd",
262 - "#c5b0d5"
263 - ],
264 - "outputs": 1,
265 - "useDifferentColor": false,
266 - "className": "",
267 - "x": 930,
268 - "y": 120,
269 - "wires": [
270 - []
271 - ]
272 - },
273 - {
274 - "id": "c7d1f63ff5f0026a",
275 - "type": "ui_text",
276 - "z": "5e07f5eeeb2a969b",
277 - "group": "528e965cef294158",
278 - "order": 0,
279 - "width": "6",
280 - "height": "4",
281 - "name": "",
282 - "label": "Digital_IStatus",
283 - "format": "{{msg.payload}}",
284 - "layout": "col-center",
285 - "className": "",
286 - "x": 960,
287 - "y": 240,
288 - "wires": []
289 - },
290 - {
291 - "id": "159967056da52706",
292 - "type": "ui_text",
293 - "z": "5e07f5eeeb2a969b",
294 - "group": "5e615e3edb5999a0",
295 - "order": 0,
296 - "width": "6",
297 - "height": "4",
298 - "name": "",
299 - "label": "EXTI_Trigger",
300 - "format": "{{msg.payload}}",
301 - "layout": "col-center",
302 - "className": "",
303 - "x": 950,
304 - "y": 280,
305 - "wires": []
306 - },
307 - {
308 - "id": "7bb78b78445ac9e3",
309 - "type": "ui_chart",
310 - "z": "5e07f5eeeb2a969b",
311 - "name": "",
312 - "group": "5f7fec85295a7f7c",
313 - "order": 0,
314 - "width": 0,
315 - "height": 0,
316 - "label": "TempC_SHT",
317 - "chartType": "line",
318 - "legend": "false",
319 - "xformat": "HH:mm:ss",
320 - "interpolate": "linear",
321 - "nodata": "",
322 - "dot": false,
323 - "ymin": "",
324 - "ymax": "",
325 - "removeOlder": 1,
326 - "removeOlderPoints": "",
327 - "removeOlderUnit": "3600",
328 - "cutout": 0,
329 - "useOneColor": false,
330 - "useUTC": false,
331 - "colors": [
332 - "#1f77b4",
333 - "#aec7e8",
334 - "#ff7f0e",
335 - "#2ca02c",
336 - "#98df8a",
337 - "#d62728",
338 - "#ff9896",
339 - "#9467bd",
340 - "#c5b0d5"
341 - ],
342 - "outputs": 1,
343 - "useDifferentColor": false,
344 - "className": "",
345 - "x": 950,
346 - "y": 360,
347 - "wires": [
348 - []
349 - ]
350 - },
351 - {
352 - "id": "0364752170ed6228",
353 - "type": "ui_text",
354 - "z": "5e07f5eeeb2a969b",
355 - "group": "3cb616f18674c42a",
356 - "order": 0,
357 - "width": "6",
358 - "height": "4",
359 - "name": "",
360 - "label": "Work_mode",
361 - "format": "{{msg.payload}}",
362 - "layout": "col-center",
363 - "className": "",
364 - "x": 950,
365 - "y": 400,
366 - "wires": []
367 - },
368 - {
369 - "id": "65293155d71d54b9",
370 - "type": "ui_chart",
371 - "z": "5e07f5eeeb2a969b",
372 - "name": "",
373 - "group": "bb2e35e7a931c198",
374 - "order": 0,
375 - "width": 0,
376 - "height": 0,
377 - "label": "Hum_SHT",
378 - "chartType": "line",
379 - "legend": "false",
380 - "xformat": "HH:mm:ss",
381 - "interpolate": "linear",
382 - "nodata": "",
383 - "dot": false,
384 - "ymin": "",
385 - "ymax": "",
386 - "removeOlder": 1,
387 - "removeOlderPoints": "",
388 - "removeOlderUnit": "3600",
389 - "cutout": 0,
390 - "useOneColor": false,
391 - "useUTC": false,
392 - "colors": [
393 - "#1f77b4",
394 - "#aec7e8",
395 - "#ff7f0e",
396 - "#2ca02c",
397 - "#98df8a",
398 - "#d62728",
399 - "#ff9896",
400 - "#9467bd",
401 - "#c5b0d5"
402 - ],
403 - "outputs": 1,
404 - "useDifferentColor": false,
405 - "className": "",
406 - "x": 950,
407 - "y": 440,
408 - "wires": [
409 - []
410 - ]
411 - },
412 - {
413 - "id": "a21581a41adc1714",
414 - "type": "ui_text",
415 - "z": "5e07f5eeeb2a969b",
416 - "group": "9109ae41eee353df",
417 - "order": 0,
418 - "width": "6",
419 - "height": "4",
420 - "name": "",
421 - "label": "Door_status",
422 - "format": "{{msg.payload}}",
423 - "layout": "col-center",
424 - "className": "",
425 - "x": 950,
426 - "y": 320,
427 - "wires": []
428 - },
429 - {
430 - "id": "416a930e89291528",
431 - "type": "debug",
432 - "z": "5e07f5eeeb2a969b",
433 - "name": "debug 2",
434 - "active": true,
435 - "tosidebar": true,
436 - "console": false,
437 - "tostatus": false,
438 - "complete": "false",
439 - "statusVal": "",
440 - "statusType": "auto",
441 - "x": 660,
442 - "y": 60,
443 - "wires": []
444 - },
445 - {
446 - "id": "3601a98894805fbe",
447 - "type": "debug",
448 - "z": "5e07f5eeeb2a969b",
449 - "name": "debug 3",
450 - "active": true,
451 - "tosidebar": true,
452 - "console": false,
453 - "tostatus": false,
454 - "complete": "false",
455 - "statusVal": "",
456 - "statusType": "auto",
457 - "x": 380,
458 - "y": 240,
459 - "wires": []
460 - },
461 - {
462 - "id": "bb1c0e81fd51fa9e",
463 - "type": "serial-port",
464 - "serialport": "/dev/ttyUSB0",
465 - "serialbaud": "9600",
466 - "databits": "8",
467 - "parity": "none",
468 - "stopbits": "1",
469 - "waitfor": "",
470 - "dtr": "none",
471 - "rts": "none",
472 - "cts": "none",
473 - "dsr": "none",
474 - "newline": "\\n",
475 - "bin": "false",
476 - "out": "char",
477 - "addchar": "\\r\\n",
478 - "responsetimeout": "10000"
479 - },
480 - {
481 - "id": "c1fddd37879528e5",
482 - "type": "ui_group",
483 - "name": "BatV",
484 - "tab": "abb98f80600a5448",
485 - "order": 1,
486 - "disp": true,
487 - "width": "6",
488 - "collapse": false,
489 - "className": ""
490 - },
491 - {
492 - "id": "6d46fdae9f413f7b",
493 - "type": "ui_group",
494 - "name": "ADC_CH0V",
495 - "tab": "abb98f80600a5448",
496 - "order": 1,
497 - "disp": true,
498 - "width": "6",
499 - "collapse": false,
500 - "className": ""
501 - },
502 - {
503 - "id": "bb5657c2a8c290a3",
504 - "type": "ui_group",
505 - "name": "BatV",
506 - "tab": "abb98f80600a5448",
507 - "order": 3,
508 - "disp": true,
509 - "width": "6",
510 - "collapse": false,
511 - "className": ""
512 - },
513 - {
514 - "id": "528e965cef294158",
515 - "type": "ui_group",
516 - "name": "Digital_IStatus",
517 - "tab": "abb98f80600a5448",
518 - "order": 4,
519 - "disp": true,
520 - "width": "6",
521 - "collapse": false,
522 - "className": ""
523 - },
524 - {
525 - "id": "5e615e3edb5999a0",
526 - "type": "ui_group",
527 - "name": "EXTI_Trigger",
528 - "tab": "abb98f80600a5448",
529 - "order": 5,
530 - "disp": true,
531 - "width": "6",
532 - "collapse": false,
533 - "className": ""
534 - },
535 - {
536 - "id": "5f7fec85295a7f7c",
537 - "type": "ui_group",
538 - "name": "TempC_SHT",
539 - "tab": "abb98f80600a5448",
540 - "order": 6,
541 - "disp": true,
542 - "width": "6",
543 - "collapse": false,
544 - "className": ""
545 - },
546 - {
547 - "id": "3cb616f18674c42a",
548 - "type": "ui_group",
549 - "name": "Work_mode",
550 - "tab": "abb98f80600a5448",
551 - "order": 7,
552 - "disp": true,
553 - "width": "6",
554 - "collapse": false,
555 - "className": ""
556 - },
557 - {
558 - "id": "bb2e35e7a931c198",
559 - "type": "ui_group",
560 - "name": "Hum_SHT",
561 - "tab": "abb98f80600a5448",
562 - "order": 8,
563 - "disp": true,
564 - "width": "6",
565 - "collapse": false,
566 - "className": ""
567 - },
568 - {
569 - "id": "9109ae41eee353df",
570 - "type": "ui_group",
571 - "name": "Door_status",
572 - "tab": "abb98f80600a5448",
573 - "order": 9,
574 - "disp": true,
575 - "width": "6",
576 - "collapse": false,
577 - "className": ""
578 - },
579 - {
580 - "id": "abb98f80600a5448",
581 - "type": "ui_tab",
582 - "name": "LSN50v2 S31",
583 - "icon": "LSN50v2 S31",
584 - "disabled": false,
585 - "hidden": false
586 - }
587 -]
LoRa_send_trial.ino
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -3.4 KB
Content
... ... @@ -1,124 +1,0 @@
1 -#include "LoRaWan_APP.h"
2 -#include "Arduino.h"
3 -
4 -
5 -#define RF_FREQUENCY 868100000 // Hz
6 -
7 -#define TX_OUTPUT_POWER 5 // dBm
8 -
9 -#define LORA_BANDWIDTH 0 // [0: 125 kHz,
10 - // 1: 250 kHz,
11 - // 2: 500 kHz,
12 - // 3: Reserved]
13 -#define LORA_SPREADING_FACTOR 12 // [SF7..SF12]
14 -#define LORA_CODINGRATE 1 // [1: 4/5,
15 - // 2: 4/6,
16 - // 3: 4/7,
17 - // 4: 4/8]
18 -#define LORA_PREAMBLE_LENGTH 8 // Same for Tx and Rx
19 -#define LORA_SYMBOL_TIMEOUT 0 // Symbols
20 -#define LORA_FIX_LENGTH_PAYLOAD_ON false
21 -#define LORA_IQ_INVERSION_ON false
22 -
23 -
24 -#define RX_TIMEOUT_VALUE 1000
25 -#define BUFFER_SIZE 30 // Define the payload size here
26 -
27 -float tem,hum;
28 -char tem_1[8]={"\0"},hum_1[8]={"\0"};
29 -char *node_id = "<GW01>"; //From LG01 via web Local Channel settings on MQTT.Please refer <> dataformat in here.
30 -
31 -char txpacket[BUFFER_SIZE];
32 -char rxpacket[BUFFER_SIZE];
33 -
34 -double txNumber;
35 -
36 -bool lora_idle=true;
37 -
38 -static RadioEvents_t RadioEvents;
39 -void OnTxDone( void );
40 -void OnTxTimeout( void );
41 -
42 -void dhtTem()
43 -{
44 - tem = random(15,40);
45 - hum = random(40,80);
46 - Serial.println(F("The temperature and humidity:"));
47 - Serial.print("[");
48 - Serial.print(tem);
49 - Serial.print("℃");
50 - Serial.print(",");
51 - Serial.print(hum);
52 - Serial.print("%");
53 - Serial.print("]");
54 - Serial.println("");
55 -}
56 -
57 -void dhtWrite()
58 -{
59 - char data[50] = "\0";
60 - for(int i = 0; i < 50; i++)
61 - {
62 - data[i] = node_id[i];
63 - }
64 -
65 - dtostrf(tem,0,1,tem_1);
66 - dtostrf(hum,0,1,hum_1);
67 -
68 - strcat(data,"tem_a=");
69 - strcat(data,tem_1);
70 - strcat(data,"&hum_a=");
71 - strcat(data,hum_1);
72 - strcpy((char *)txpacket,data);
73 -
74 - Serial.println((char *)txpacket);
75 -}
76 -
77 -void setup() {
78 - Serial.begin(115200);
79 - Mcu.begin();
80 -
81 - txNumber=0;
82 -
83 - RadioEvents.TxDone = OnTxDone;
84 - RadioEvents.TxTimeout = OnTxTimeout;
85 -
86 - Radio.Init( &RadioEvents );
87 - Radio.SetChannel( RF_FREQUENCY );
88 - Radio.SetTxConfig( MODEM_LORA, TX_OUTPUT_POWER, 0, LORA_BANDWIDTH,
89 - LORA_SPREADING_FACTOR, LORA_CODINGRATE,
90 - LORA_PREAMBLE_LENGTH, LORA_FIX_LENGTH_PAYLOAD_ON,
91 - true, 0, 0, LORA_IQ_INVERSION_ON, 3000 );
92 - }
93 -
94 -
95 -
96 -void loop()
97 -{
98 - if(lora_idle == true)
99 - {
100 - delay(5000);
101 - txNumber += 0.01;
102 - Serial.println(txNumber);
103 -
104 - dhtTem();
105 - dhtWrite();
106 - Radio.Send( (uint8_t *)txpacket, strlen(txpacket) ); //send the package out
107 - lora_idle = false;
108 - }
109 - Radio.IrqProcess( );
110 -}
111 -
112 -void OnTxDone( void )
113 -{
114 - Serial.println("TX done......");
115 - lora_idle = true;
116 -}
117 -
118 -void OnTxTimeout( void )
119 -{
120 - Radio.Sleep( );
121 - Serial.println("TX Timeout......");
122 - lora_idle = true;
123 -}
124 -
Log-Temperature-Sensor-and-send-data-to-Node-red.json
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.3 KB
Content
... ... @@ -1,443 +1,0 @@
1 -[
2 - {
3 - "id": "0a211e08511c4bdd",
4 - "type": "tab",
5 - "label": "serial USB",
6 - "disabled": false,
7 - "info": "",
8 - "env": []
9 - },
10 - {
11 - "id": "4a97eeb54bf57a6d",
12 - "type": "serial in",
13 - "z": "0a211e08511c4bdd",
14 - "name": "",
15 - "serial": "bb1c0e81fd51fa9e",
16 - "x": 210,
17 - "y": 60,
18 - "wires": [
19 - [
20 - "d2493fb9752dbcab",
21 - "d183c255973c979e"
22 - ]
23 - ]
24 - },
25 - {
26 - "id": "12f1eeb8049675c1",
27 - "type": "inject",
28 - "z": "0a211e08511c4bdd",
29 - "name": "AT+SEND=1,hello world,0,3",
30 - "props": [
31 - {
32 - "p": "payload"
33 - }
34 - ],
35 - "repeat": "",
36 - "crontab": "",
37 - "once": false,
38 - "onceDelay": 0.1,
39 - "topic": "",
40 - "payload": "AT+SEND=1,hello world,0,3",
41 - "payloadType": "str",
42 - "x": 220,
43 - "y": 260,
44 - "wires": [
45 - [
46 - "a5d2f5df63a2148e"
47 - ]
48 - ]
49 - },
50 - {
51 - "id": "a5d2f5df63a2148e",
52 - "type": "serial out",
53 - "z": "0a211e08511c4bdd",
54 - "name": "",
55 - "serial": "bb1c0e81fd51fa9e",
56 - "x": 540,
57 - "y": 260,
58 - "wires": []
59 - },
60 - {
61 - "id": "dc04c04a0bc0e5db",
62 - "type": "inject",
63 - "z": "0a211e08511c4bdd",
64 - "name": "",
65 - "props": [
66 - {
67 - "p": "payload"
68 - }
69 - ],
70 - "repeat": "",
71 - "crontab": "",
72 - "once": false,
73 - "onceDelay": 0.1,
74 - "topic": "",
75 - "payload": "ATZ",
76 - "payloadType": "str",
77 - "x": 290,
78 - "y": 320,
79 - "wires": [
80 - [
81 - "a5d2f5df63a2148e"
82 - ]
83 - ]
84 - },
85 - {
86 - "id": "3de96a220e28e8f0",
87 - "type": "inject",
88 - "z": "0a211e08511c4bdd",
89 - "name": "AT+FRE",
90 - "props": [
91 - {
92 - "p": "payload"
93 - }
94 - ],
95 - "repeat": "",
96 - "crontab": "",
97 - "once": false,
98 - "onceDelay": 0.1,
99 - "topic": "",
100 - "payload": "AT+FRE=868.100,868.100",
101 - "payloadType": "str",
102 - "x": 280,
103 - "y": 380,
104 - "wires": [
105 - [
106 - "a5d2f5df63a2148e"
107 - ]
108 - ]
109 - },
110 - {
111 - "id": "638725a47a1e4365",
112 - "type": "inject",
113 - "z": "0a211e08511c4bdd",
114 - "name": "AT+BW",
115 - "props": [
116 - {
117 - "p": "payload"
118 - }
119 - ],
120 - "repeat": "",
121 - "crontab": "",
122 - "once": false,
123 - "onceDelay": 0.1,
124 - "topic": "",
125 - "payload": "AT+BW=0,0",
126 - "payloadType": "str",
127 - "x": 290,
128 - "y": 440,
129 - "wires": [
130 - [
131 - "a5d2f5df63a2148e"
132 - ]
133 - ]
134 - },
135 - {
136 - "id": "85ba9868d1f3e82c",
137 - "type": "inject",
138 - "z": "0a211e08511c4bdd",
139 - "name": "AT+SF",
140 - "props": [
141 - {
142 - "p": "payload"
143 - }
144 - ],
145 - "repeat": "",
146 - "crontab": "",
147 - "once": false,
148 - "onceDelay": 0.1,
149 - "topic": "",
150 - "payload": "AT+SF=12,12",
151 - "payloadType": "str",
152 - "x": 290,
153 - "y": 500,
154 - "wires": [
155 - [
156 - "a5d2f5df63a2148e"
157 - ]
158 - ]
159 - },
160 - {
161 - "id": "144b2749013ffe57",
162 - "type": "inject",
163 - "z": "0a211e08511c4bdd",
164 - "name": "AT+RXMOD",
165 - "props": [
166 - {
167 - "p": "payload"
168 - }
169 - ],
170 - "repeat": "",
171 - "crontab": "",
172 - "once": false,
173 - "onceDelay": 0.1,
174 - "topic": "",
175 - "payload": "AT+RXMOD=65535,2",
176 - "payloadType": "str",
177 - "x": 270,
178 - "y": 560,
179 - "wires": [
180 - [
181 - "a5d2f5df63a2148e"
182 - ]
183 - ]
184 - },
185 - {
186 - "id": "bfb2e9df89dc5e2f",
187 - "type": "inject",
188 - "z": "0a211e08511c4bdd",
189 - "name": "AT+SYNCWORD",
190 - "props": [
191 - {
192 - "p": "payload"
193 - }
194 - ],
195 - "repeat": "",
196 - "crontab": "",
197 - "once": false,
198 - "onceDelay": 0.1,
199 - "topic": "",
200 - "payload": "AT+SYNCWORD=0",
201 - "payloadType": "str",
202 - "x": 260,
203 - "y": 620,
204 - "wires": [
205 - [
206 - "a5d2f5df63a2148e"
207 - ]
208 - ]
209 - },
210 - {
211 - "id": "d2493fb9752dbcab",
212 - "type": "function",
213 - "z": "0a211e08511c4bdd",
214 - "name": "function 1",
215 - "func": "var data = msg.payload\nif (data.substring(0, 4) == \"Data\") {\n if (data.substring(6, 12) == \"(HEX:)\") {\n var temp = data.substring(13, 15) + data.substring(16, 18)\n var hum = data.substring(19, 21) + data.substring(22, 24)\n var temp1 = parseInt(temp, 16) / 100\n var hum1 = parseInt(hum, 16) / 10\n var a1 = { payload: temp1 }, a2 = { payload: hum1 }\n }\n if (data.substring(6, 15) == \"(String:)\") {\n var temp = data.substring(20, 24)\n var hum = data.substring(29, 34)\n a1 = { payload: temp }, a2 = { payload: hum }\n }\n}\nif (data.substring(0, 4) == \"Rssi\") {\n var rssi = data.substring(6)\n var a3 = { payload: rssi }\n}\nreturn [a1, a2, a3];",
216 - "outputs": 3,
217 - "noerr": 0,
218 - "initialize": "",
219 - "finalize": "",
220 - "libs": [],
221 - "x": 420,
222 - "y": 60,
223 - "wires": [
224 - [
225 - "c17d94be4317ae6c"
226 - ],
227 - [
228 - "20c5b1c7f42fa6bb"
229 - ],
230 - [
231 - "39a8462f3d748eef"
232 - ]
233 - ]
234 - },
235 - {
236 - "id": "39a8462f3d748eef",
237 - "type": "ui_chart",
238 - "z": "0a211e08511c4bdd",
239 - "name": "",
240 - "group": "ef41b39771110fa5",
241 - "order": 1,
242 - "width": 0,
243 - "height": 0,
244 - "label": "RSSI",
245 - "chartType": "line",
246 - "legend": "false",
247 - "xformat": "dd HH:mm",
248 - "interpolate": "linear",
249 - "nodata": "",
250 - "dot": true,
251 - "ymin": "",
252 - "ymax": "",
253 - "removeOlder": 1,
254 - "removeOlderPoints": "",
255 - "removeOlderUnit": "3600",
256 - "cutout": 0,
257 - "useOneColor": false,
258 - "useUTC": false,
259 - "colors": [
260 - "#1f77b4",
261 - "#aec7e8",
262 - "#ff7f0e",
263 - "#2ca02c",
264 - "#98df8a",
265 - "#d62728",
266 - "#ff9896",
267 - "#9467bd",
268 - "#c5b0d5"
269 - ],
270 - "outputs": 1,
271 - "useDifferentColor": false,
272 - "className": "",
273 - "x": 670,
274 - "y": 180,
275 - "wires": [
276 - []
277 - ]
278 - },
279 - {
280 - "id": "c17d94be4317ae6c",
281 - "type": "ui_chart",
282 - "z": "0a211e08511c4bdd",
283 - "name": "",
284 - "group": "7e1d1c102cf74e6b",
285 - "order": 1,
286 - "width": 0,
287 - "height": 0,
288 - "label": "Temperature",
289 - "chartType": "line",
290 - "legend": "false",
291 - "xformat": "HH:mm:ss",
292 - "interpolate": "linear",
293 - "nodata": "",
294 - "dot": true,
295 - "ymin": "",
296 - "ymax": "",
297 - "removeOlder": 1,
298 - "removeOlderPoints": "",
299 - "removeOlderUnit": "3600",
300 - "cutout": 0,
301 - "useOneColor": false,
302 - "useUTC": false,
303 - "colors": [
304 - "#1f77b4",
305 - "#aec7e8",
306 - "#ff7f0e",
307 - "#2ca02c",
308 - "#98df8a",
309 - "#d62728",
310 - "#ff9896",
311 - "#9467bd",
312 - "#c5b0d5"
313 - ],
314 - "outputs": 1,
315 - "useDifferentColor": false,
316 - "className": "",
317 - "x": 690,
318 - "y": 100,
319 - "wires": [
320 - []
321 - ]
322 - },
323 - {
324 - "id": "20c5b1c7f42fa6bb",
325 - "type": "ui_chart",
326 - "z": "0a211e08511c4bdd",
327 - "name": "",
328 - "group": "3f5d139f158d7c1c",
329 - "order": 2,
330 - "width": 0,
331 - "height": 0,
332 - "label": "Humidity",
333 - "chartType": "line",
334 - "legend": "false",
335 - "xformat": "HH:mm:ss",
336 - "interpolate": "linear",
337 - "nodata": "",
338 - "dot": true,
339 - "ymin": "",
340 - "ymax": "",
341 - "removeOlder": 1,
342 - "removeOlderPoints": "",
343 - "removeOlderUnit": "3600",
344 - "cutout": 0,
345 - "useOneColor": false,
346 - "useUTC": false,
347 - "colors": [
348 - "#1f77b4",
349 - "#aec7e8",
350 - "#ff7f0e",
351 - "#2ca02c",
352 - "#98df8a",
353 - "#d62728",
354 - "#ff9896",
355 - "#9467bd",
356 - "#c5b0d5"
357 - ],
358 - "outputs": 1,
359 - "useDifferentColor": false,
360 - "className": "",
361 - "x": 680,
362 - "y": 140,
363 - "wires": [
364 - []
365 - ]
366 - },
367 - {
368 - "id": "d183c255973c979e",
369 - "type": "debug",
370 - "z": "0a211e08511c4bdd",
371 - "name": "debug 1",
372 - "active": true,
373 - "tosidebar": true,
374 - "console": false,
375 - "tostatus": false,
376 - "complete": "false",
377 - "statusVal": "",
378 - "statusType": "auto",
379 - "x": 420,
380 - "y": 180,
381 - "wires": []
382 - },
383 - {
384 - "id": "bb1c0e81fd51fa9e",
385 - "type": "serial-port",
386 - "serialport": "/dev/ttyUSB0",
387 - "serialbaud": "9600",
388 - "databits": "8",
389 - "parity": "none",
390 - "stopbits": "1",
391 - "waitfor": "",
392 - "dtr": "none",
393 - "rts": "none",
394 - "cts": "none",
395 - "dsr": "none",
396 - "newline": "\\n",
397 - "bin": "false",
398 - "out": "char",
399 - "addchar": "\\r\\n",
400 - "responsetimeout": "10000"
401 - },
402 - {
403 - "id": "ef41b39771110fa5",
404 - "type": "ui_group",
405 - "name": "rssi",
406 - "tab": "abb98f80600a5448",
407 - "order": 3,
408 - "disp": true,
409 - "width": "6",
410 - "collapse": false,
411 - "className": ""
412 - },
413 - {
414 - "id": "7e1d1c102cf74e6b",
415 - "type": "ui_group",
416 - "name": "TEM",
417 - "tab": "abb98f80600a5448",
418 - "order": 4,
419 - "disp": true,
420 - "width": "6",
421 - "collapse": false,
422 - "className": ""
423 - },
424 - {
425 - "id": "3f5d139f158d7c1c",
426 - "type": "ui_group",
427 - "name": "HUM",
428 - "tab": "abb98f80600a5448",
429 - "order": 2,
430 - "disp": true,
431 - "width": "6",
432 - "collapse": false,
433 - "className": ""
434 - },
435 - {
436 - "id": "abb98f80600a5448",
437 - "type": "ui_tab",
438 - "name": "LG01v2",
439 - "icon": "LG01v2",
440 - "disabled": false,
441 - "hidden": false
442 - }
443 -]
Log-Temperature-Sensor-and-send-data-to-node-red.json
Size
... ... @@ -1,1 +1,1 @@
1 -10.1 KB
1 +806 bytes
Content
... ... @@ -1,13 +1,5 @@
1 1  [
2 2   {
3 - "id": "5f10779accc05655",
4 - "type": "tab",
5 - "label": "serial USB",
6 - "disabled": false,
7 - "info": "",
8 - "env": []
9 - },
10 - {
11 11   "id": "4ea60ce4df40717c",
12 12   "type": "serial in",
13 13   "z": "5f10779accc05655",
... ... @@ -23,364 +23,6 @@
23 23   ]
24 24   },
25 25   {
26 - "id": "fe5a93a52b6adcf1",
27 - "type": "inject",
28 - "z": "5f10779accc05655",
29 - "name": "AT+SEND=1,hello world,0,3",
30 - "props": [
31 - {
32 - "p": "payload"
33 - }
34 - ],
35 - "repeat": "",
36 - "crontab": "",
37 - "once": false,
38 - "onceDelay": 0.1,
39 - "topic": "",
40 - "payload": "AT+SEND=1,hello world,0,3",
41 - "payloadType": "str",
42 - "x": 220,
43 - "y": 260,
44 - "wires": [
45 - [
46 - "3f8add7e2e1d1d17"
47 - ]
48 - ]
49 - },
50 - {
51 - "id": "3f8add7e2e1d1d17",
52 - "type": "serial out",
53 - "z": "5f10779accc05655",
54 - "name": "",
55 - "serial": "bb1c0e81fd51fa9e",
56 - "x": 540,
57 - "y": 260,
58 - "wires": []
59 - },
60 - {
61 - "id": "16e7d3d83d9e9415",
62 - "type": "inject",
63 - "z": "5f10779accc05655",
64 - "name": "",
65 - "props": [
66 - {
67 - "p": "payload"
68 - }
69 - ],
70 - "repeat": "",
71 - "crontab": "",
72 - "once": false,
73 - "onceDelay": 0.1,
74 - "topic": "",
75 - "payload": "ATZ",
76 - "payloadType": "str",
77 - "x": 290,
78 - "y": 320,
79 - "wires": [
80 - [
81 - "3f8add7e2e1d1d17"
82 - ]
83 - ]
84 - },
85 - {
86 - "id": "09ea381519629dae",
87 - "type": "inject",
88 - "z": "5f10779accc05655",
89 - "name": "AT+FRE",
90 - "props": [
91 - {
92 - "p": "payload"
93 - }
94 - ],
95 - "repeat": "",
96 - "crontab": "",
97 - "once": false,
98 - "onceDelay": 0.1,
99 - "topic": "",
100 - "payload": "AT+FRE=868.100,868.100",
101 - "payloadType": "str",
102 - "x": 280,
103 - "y": 380,
104 - "wires": [
105 - [
106 - "3f8add7e2e1d1d17"
107 - ]
108 - ]
109 - },
110 - {
111 - "id": "5167a7f904013ffd",
112 - "type": "inject",
113 - "z": "5f10779accc05655",
114 - "name": "AT+BW",
115 - "props": [
116 - {
117 - "p": "payload"
118 - }
119 - ],
120 - "repeat": "",
121 - "crontab": "",
122 - "once": false,
123 - "onceDelay": 0.1,
124 - "topic": "",
125 - "payload": "AT+BW=0,0",
126 - "payloadType": "str",
127 - "x": 290,
128 - "y": 440,
129 - "wires": [
130 - [
131 - "3f8add7e2e1d1d17"
132 - ]
133 - ]
134 - },
135 - {
136 - "id": "dbe4abbc730c76e6",
137 - "type": "inject",
138 - "z": "5f10779accc05655",
139 - "name": "AT+SF",
140 - "props": [
141 - {
142 - "p": "payload"
143 - }
144 - ],
145 - "repeat": "",
146 - "crontab": "",
147 - "once": false,
148 - "onceDelay": 0.1,
149 - "topic": "",
150 - "payload": "AT+SF=12,12",
151 - "payloadType": "str",
152 - "x": 290,
153 - "y": 500,
154 - "wires": [
155 - [
156 - "3f8add7e2e1d1d17"
157 - ]
158 - ]
159 - },
160 - {
161 - "id": "3be3ab296a75d512",
162 - "type": "inject",
163 - "z": "5f10779accc05655",
164 - "name": "AT+RXMOD",
165 - "props": [
166 - {
167 - "p": "payload"
168 - }
169 - ],
170 - "repeat": "",
171 - "crontab": "",
172 - "once": false,
173 - "onceDelay": 0.1,
174 - "topic": "",
175 - "payload": "AT+RXMOD=65535,2",
176 - "payloadType": "str",
177 - "x": 270,
178 - "y": 560,
179 - "wires": [
180 - [
181 - "3f8add7e2e1d1d17"
182 - ]
183 - ]
184 - },
185 - {
186 - "id": "7a03d1413c60ea1c",
187 - "type": "inject",
188 - "z": "5f10779accc05655",
189 - "name": "AT+SYNCWORD",
190 - "props": [
191 - {
192 - "p": "payload"
193 - }
194 - ],
195 - "repeat": "",
196 - "crontab": "",
197 - "once": false,
198 - "onceDelay": 0.1,
199 - "topic": "",
200 - "payload": "AT+SYNCWORD=0",
201 - "payloadType": "str",
202 - "x": 260,
203 - "y": 620,
204 - "wires": [
205 - [
206 - "3f8add7e2e1d1d17"
207 - ]
208 - ]
209 - },
210 - {
211 - "id": "40eac96a52733f7a",
212 - "type": "function",
213 - "z": "5f10779accc05655",
214 - "name": "function 1",
215 - "func": "var data = msg.payload\nif (data.substring(0, 4) == \"Data\")\n{\n if (data.substring(6, 12) == \"(HEX:)\")\n {\n var temp = data.substring(13, 15) + data.substring(16, 18)\n var hum = data.substring(19, 21) + data.substring(22, 24)\n var temp1 = parseInt(temp, 16)/100\n var hum1 = parseInt(hum, 16)/10\n var a1 = { payload: temp1 }, a2 = { payload: hum1 }\n }\n}\nif (data.substring(0, 4) == \"Rssi\")\n{\n var rssi = data.substring(6)\n var a3 = { payload: rssi }\n}\nreturn [a1,a2,a3];\n \n\n",
216 - "outputs": 3,
217 - "noerr": 0,
218 - "initialize": "",
219 - "finalize": "",
220 - "libs": [],
221 - "x": 420,
222 - "y": 60,
223 - "wires": [
224 - [
225 - "81edb003937f1a92"
226 - ],
227 - [
228 - "c63593404a60d9dc"
229 - ],
230 - [
231 - "61ca71032888887b"
232 - ]
233 - ]
234 - },
235 - {
236 - "id": "61ca71032888887b",
237 - "type": "ui_chart",
238 - "z": "5f10779accc05655",
239 - "name": "",
240 - "group": "ef41b39771110fa5",
241 - "order": 1,
242 - "width": 0,
243 - "height": 0,
244 - "label": "RSSI",
245 - "chartType": "line",
246 - "legend": "false",
247 - "xformat": "dd HH:mm",
248 - "interpolate": "linear",
249 - "nodata": "",
250 - "dot": true,
251 - "ymin": "",
252 - "ymax": "",
253 - "removeOlder": 1,
254 - "removeOlderPoints": "",
255 - "removeOlderUnit": "3600",
256 - "cutout": 0,
257 - "useOneColor": false,
258 - "useUTC": false,
259 - "colors": [
260 - "#1f77b4",
261 - "#aec7e8",
262 - "#ff7f0e",
263 - "#2ca02c",
264 - "#98df8a",
265 - "#d62728",
266 - "#ff9896",
267 - "#9467bd",
268 - "#c5b0d5"
269 - ],
270 - "outputs": 1,
271 - "useDifferentColor": false,
272 - "className": "",
273 - "x": 670,
274 - "y": 180,
275 - "wires": [
276 - []
277 - ]
278 - },
279 - {
280 - "id": "81edb003937f1a92",
281 - "type": "ui_chart",
282 - "z": "5f10779accc05655",
283 - "name": "",
284 - "group": "7e1d1c102cf74e6b",
285 - "order": 1,
286 - "width": 0,
287 - "height": 0,
288 - "label": "Temperature",
289 - "chartType": "line",
290 - "legend": "false",
291 - "xformat": "HH:mm:ss",
292 - "interpolate": "linear",
293 - "nodata": "",
294 - "dot": true,
295 - "ymin": "",
296 - "ymax": "",
297 - "removeOlder": 1,
298 - "removeOlderPoints": "",
299 - "removeOlderUnit": "3600",
300 - "cutout": 0,
301 - "useOneColor": false,
302 - "useUTC": false,
303 - "colors": [
304 - "#1f77b4",
305 - "#aec7e8",
306 - "#ff7f0e",
307 - "#2ca02c",
308 - "#98df8a",
309 - "#d62728",
310 - "#ff9896",
311 - "#9467bd",
312 - "#c5b0d5"
313 - ],
314 - "outputs": 1,
315 - "useDifferentColor": false,
316 - "className": "",
317 - "x": 690,
318 - "y": 100,
319 - "wires": [
320 - []
321 - ]
322 - },
323 - {
324 - "id": "c63593404a60d9dc",
325 - "type": "ui_chart",
326 - "z": "5f10779accc05655",
327 - "name": "",
328 - "group": "3f5d139f158d7c1c",
329 - "order": 2,
330 - "width": 0,
331 - "height": 0,
332 - "label": "Humidity",
333 - "chartType": "line",
334 - "legend": "false",
335 - "xformat": "HH:mm:ss",
336 - "interpolate": "linear",
337 - "nodata": "",
338 - "dot": true,
339 - "ymin": "",
340 - "ymax": "",
341 - "removeOlder": 1,
342 - "removeOlderPoints": "",
343 - "removeOlderUnit": "3600",
344 - "cutout": 0,
345 - "useOneColor": false,
346 - "useUTC": false,
347 - "colors": [
348 - "#1f77b4",
349 - "#aec7e8",
350 - "#ff7f0e",
351 - "#2ca02c",
352 - "#98df8a",
353 - "#d62728",
354 - "#ff9896",
355 - "#9467bd",
356 - "#c5b0d5"
357 - ],
358 - "outputs": 1,
359 - "useDifferentColor": false,
360 - "className": "",
361 - "x": 680,
362 - "y": 140,
363 - "wires": [
364 - []
365 - ]
366 - },
367 - {
368 - "id": "79722a224bb22c96",
369 - "type": "debug",
370 - "z": "5f10779accc05655",
371 - "name": "debug 1",
372 - "active": true,
373 - "tosidebar": true,
374 - "console": false,
375 - "tostatus": false,
376 - "complete": "false",
377 - "statusVal": "",
378 - "statusType": "auto",
379 - "x": 420,
380 - "y": 180,
381 - "wires": []
382 - },
383 - {
384 384   "id": "bb1c0e81fd51fa9e",
385 385   "type": "serial-port",
386 386   "serialport": "/dev/ttyUSB0",
... ... @@ -398,46 +398,5 @@
398 398   "out": "char",
399 399   "addchar": "\\r\\n",
400 400   "responsetimeout": "10000"
401 - },
402 - {
403 - "id": "ef41b39771110fa5",
404 - "type": "ui_group",
405 - "name": "rssi",
406 - "tab": "abb98f80600a5448",
407 - "order": 3,
408 - "disp": true,
409 - "width": "6",
410 - "collapse": false,
411 - "className": ""
412 - },
413 - {
414 - "id": "7e1d1c102cf74e6b",
415 - "type": "ui_group",
416 - "name": "TEM",
417 - "tab": "abb98f80600a5448",
418 - "order": 4,
419 - "disp": true,
420 - "width": "6",
421 - "collapse": false,
422 - "className": ""
423 - },
424 - {
425 - "id": "3f5d139f158d7c1c",
426 - "type": "ui_group",
427 - "name": "HUM",
428 - "tab": "abb98f80600a5448",
429 - "order": 2,
430 - "disp": true,
431 - "width": "6",
432 - "collapse": false,
433 - "className": ""
434 - },
435 - {
436 - "id": "abb98f80600a5448",
437 - "type": "ui_tab",
438 - "name": "LG01v2",
439 - "icon": "LG01v2",
440 - "disabled": false,
441 - "hidden": false
442 442   }
443 443  ]
image-20221108180334-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -159.3 KB
Content
image-20221108180458-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.4 KB
Content
image-20221112161031-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.1 KB
Content
image-20221112161111-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20221112162733-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -78.7 KB
Content
image-20221112163119-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -32.6 KB
Content
image-20230504095457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -412.6 KB
Content
image-20230504095502-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -412.6 KB
Content
image-20230504100722-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.5 KB
Content
image-20230506110646-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -383.1 KB
Content
image-20230506113332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20230506113432-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -36.5 KB
Content
image-20230506113531-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -403.2 KB
Content
image-20230506113602-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -26.7 KB
Content
image-20230506113623-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.4 KB
Content
image-20230506113705-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -40.9 KB
Content
image-20230506113722-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.2 KB
Content
image-20230506113737-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20230506113813-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -39.5 KB
Content
image-20230506113831-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -32.2 KB
Content
image-20230506114127-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.1 KB
Content
image-20230506115438-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -413.6 KB
Content
image-20230620103153-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -127.6 KB
Content
image-20230620103535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -156.3 KB
Content
image-20230620103923-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -72.7 KB
Content
image-20231014092843-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -596 bytes
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0