Last modified by Kilight Cao on 2024/10/12 08:58
<
From version < 143.1 >
edited by Kilight Cao
on 2023/10/14 09:28
To version < 113.1 >
edited by Kilight Cao
on 2023/05/04 09:55
>
Change comment: Uploaded new attachment "image-20230504095502-2.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -16,26 +16,26 @@
16 16  
17 17  
18 18  
19 -= 1. Introduction =
19 += **1. Introduction** =
20 20  
21 -== 1.1 What is LG01v2 ==
21 +== **1.1 What is LG01v2** ==
22 22  
23 23  
24 24  (((
25 25  (((
26 -The LG01v2 is an (% style="color:blue" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LG01v2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  
28 -LG01v2 is specially design for (% style="color:blue" %)**peer to peer LoRa**(%%) protocol instead of LoRaWAN protocol. The LG01v2 use single channel LoRa module to minimize the deployment cost for a private p2p LoRa wireless network.
28 +LG01v2 is specially design for (% style="color:green" %)**peer to peer LoRa**(%%) protocol instead of LoRaWAN protocol. The LG01v2 use single channel LoRa module to minimize the deployment cost for a private p2p LoRa wireless network.
29 29  )))
30 30  
31 31  (((
32 -LG01v2 uses Open Source Linux system. User can modify the Linux part and develop customize software base on it. It has (% style="color:blue" %)**1.2Ghz Quad-Core CPU**(%%) , (% style="color:blue" %)**4GB eMMC storage**(%%) and (% style="color:blue" %)**512MB RAM**(%%) for most application.
32 +LG01v2 uses Open Source Linux system. User can modify the Linux part and develop customize software base on it. It has (% style="color:green" %)**1.2Ghz Quad-Core CPU**(%%) , (% style="color:green" %)**4GB eMMC storage**(%%) and (% style="color:green" %)**512MB RAM**(%%) for most application.
33 33  
34 -LG01v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
34 +LG01v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
35 35  )))
36 36  
37 37  
38 -== 1.2 Specifications ==
38 +== **1.2 Specifications** ==
39 39  
40 40  
41 41  (% style="color:#037691" %)**Hardware System:**
... ... @@ -55,7 +55,7 @@
55 55  * Storage Temperature: -20 ~~ 65°C
56 56  * Power Input: 5V, 2A, DC
57 57  
58 -== 1.3 Features ==
58 +== **1.3 Features** ==
59 59  
60 60  
61 61  * Open Source Debian system
... ... @@ -65,48 +65,48 @@
65 65  * LoRa Gateway
66 66  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
67 67  
68 -== 1.4 Block Diagram ==
68 +== **1.4 Block Diagram** ==
69 69  
70 70  
71 71  
72 -== 1.5 LED Indicators ==
72 +== **1.5 LED Indicators** ==
73 73  
74 74  
75 75  LG01-V2 has totally four LEDs, They are:
76 76  
77 77  
78 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
78 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
79 79  
80 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
80 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
81 81  
82 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
82 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
83 83  
84 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
84 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
85 85  
86 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
86 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
87 87  
88 - ✓** SOLID RED:** Device doesn't have an Internet connection.
88 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
89 89  
90 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
90 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
91 91  
92 92  
93 -== 1.6 Button Intruction ==
93 +== **1.6 Button Intruction** ==
94 94  
95 95  
96 96  LG01-V2 has a black toggle button, which is:
97 97  
98 98  
99 -(% style="color:blue" %)**➢ Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
99 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
100 100  
101 - **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
101 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
102 102  
103 103  
104 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
104 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
105 105  
106 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
106 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
107 107  
108 108  
109 -= 2. Quick Start =
109 += **2. Quick Start** =
110 110  
111 111  
112 112  The LG01-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
... ... @@ -114,12 +114,12 @@
114 114  In most cases, the first thing you need to do is make the LG01-v2 accessible to the network.
115 115  
116 116  
117 -== 2.1 Access and Configure LG01-v2 ==
117 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
118 118  
119 -=== 2.1.1 Find IP address of LG01-v2 ===
119 +== **2.1.1 connect the network.** ==
120 120  
121 121  
122 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
122 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
123 123  
124 124  
125 125  Connect the LG01-V2 Ethernet port to your router and LG01-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01-V2.
... ... @@ -129,38 +129,10 @@
129 129  
130 130  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100129-1.png?width=1263&height=332&rev=1.1||alt="image-20220622100129-1.png"]]
131 131  
132 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via LG01v2 Fallback IP ====
133 133  
134 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230107084650-2.png?width=839&height=310&rev=1.1||alt="image-20230107084650-2.png" height="284" width="769"]]
133 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
135 135  
136 136  
137 -**Steps to connect via fallback IP:**
138 -
139 -~1. Connect the PC's Ethernet port to LG01v2's WAN port
140 -
141 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
142 -
143 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
144 -
145 -
146 -As in the below photo:
147 -
148 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413172038-1.png?width=1243&height=732&rev=1.1||alt="image-20230413172038-1.png" height="624" width="1059"]]
149 -
150 -
151 -Configure computer Ethernet port steps video: **[[fallback ip.mp4>>url:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/fallback%20ip.mp4?rev=1.1]]**
152 -
153 -If you still can't access the LG01v2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/LG01v2/#H10.1A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
154 -
155 -3. In the PC, use IP address 172.31.255.254 to access the LG01v2 via Web or Console.
156 -
157 -[[image:image-20230506115438-13.png||height="554" width="1047"]]
158 -
159 -
160 -
161 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ====
162 -
163 -
164 164  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100542-2.png?width=1256&height=369&rev=1.1||alt="image-20220622100542-2.png"]]
165 165  
166 166  
... ... @@ -167,111 +167,68 @@
167 167  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
168 168  
169 169  
170 -[[image:image-20230506113332-2.png]]
142 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102702-6.png?rev=1.1||alt="image-20220622102702-6.png"]]
171 171  
172 172  
173 173  **Wi-Fi configuration successful**
174 174  
175 175  
176 -[[image:image-20230506113432-3.png||height="397" width="855"]]
148 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102847-7.png?rev=1.1||alt="image-20220622102847-7.png"]]
177 177  
178 178  
179 -=== 2.1.2 Access Configure Web UI ===
151 += **3. Web Configure Pages** =
180 180  
153 +== **3.1 Home** ==
181 181  
182 -**Web Interface**
183 183  
184 -Open a browser on the PC and type the LG01v2 ip address (depends on your connect method)
156 +//Shows the system running status~://
185 185  
158 +[[image:image-20221104155612-1.png||height="497" width="942"]]
186 186  
187 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
188 188  
189 -You will see the login interface of LG01v2 as shown below.
161 +== **3.2 Network Settings** ==
190 190  
191 -The account details for Web Login are:
163 +=== **3.2.1 Network ~-~-> WiFi** ===
192 192  
193 -(% style="color:#4f81bd" %)**User Name: root**
194 194  
195 -(% style="color:#4f81bd" %)**Password:   dragino**
166 +[[image:image-20221104155654-2.png||height="319" width="813"]]
196 196  
197 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230106153501-1.png?width=894&height=367&rev=1.1||alt="image-20230106153501-1.png"]]
198 198  
169 +=== **3.4.2 Network ~-~-> System Status** ===
199 199  
200 -= 3. Web Configure Pages =
201 201  
202 -== 3.1 Home ==
172 +[[image:image-20221104155724-3.png||height="679" width="861"]]
203 203  
204 204  
205 -Shows the system running status:
175 +=== **3.4.3 Network ~-~-> Firewall** ===
206 206  
207 -[[image:image-20230506113531-4.png||height="430" width="818"]]
208 208  
178 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616115351-6.png?width=661&height=244&rev=1.1||alt="image-20220616115351-6.png"]]
209 209  
210 -== 3.2 Network Settings ==
211 211  
212 -=== 3.2.1 Network ~-~-> WiFi ===
181 +== **3.5 System** ==
213 213  
183 +=== **3.5.1  System ~-~-> System Overview** ===
214 214  
215 -[[image:image-20230506113602-5.png]]
216 216  
217 -
218 -=== 3.4.2 Network ~-~-> System Status ===
219 -
220 -
221 -[[image:image-20230506113623-6.png||height="511" width="672"]]
222 -
223 -
224 -== 3.5 System ==
225 -
226 -=== 3.5.1  System ~-~-> System Overview ===
227 -
228 -
229 229  Shows the system info:
230 230  
231 -[[image:image-20230506113705-7.png]]
188 +[[image:image-20221104155907-4.png]]
232 232  
233 233  
234 -=== 3.5.2 System ~-~-> Backup/Restore ===
191 +=== **3.5.2 System ~-~-> Backup/Restore** ===
235 235  
236 236  
237 -[[image:image-20230506113722-8.png||height="254" width="797"]]
194 +[[image:image-20221104155928-5.png||height="334" width="880"]]
238 238  
239 239  
240 -=== 3.5.3 System ~-~-> System General ===
197 += (% id="cke_bm_1978S" style="display:none" %)** **(%%)**4. Build in Server** =
241 241  
242 242  
243 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
244 -
245 -In addition, Users can customize the FallBack IP address.
246 -
247 -[[image:image-20230506113813-10.png||height="659" width="749"]]
248 -
249 -
250 -=== 3.5.4 System ~-~-> Remoteit ===
251 -
252 -
253 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
254 -
255 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
256 -
257 -[[image:image-20230506113831-11.png||height="567" width="748"]]
258 -
259 -
260 -=== 3.5.5 System ~-~-> Package Management ===
261 -
262 -
263 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
264 -
265 -[[image:image-20230506114127-12.png||height="803" width="762"]]
266 -
267 -
268 -= (% id="cke_bm_1978S" style="display:none" %) (%%)4. Build in Server =
269 -
270 -
271 271  The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
272 272  
273 273  
274 -[[image:image-20230506113737-9.png]]
203 +[[image:image-20221104155949-6.png||height="315" width="1023"]]
275 275  
276 276  
277 277  (% style="color:red" %)**Note:**
... ... @@ -286,7 +286,7 @@
286 286   For the Node-Red, you can use the local IP address and the port is 1880 to access it.
287 287  
288 288  
289 -== 4.1 Application Server ~-~- Node-Red ==
218 +== **4.1 Application Server ~-~- Node-Red** ==
290 290  
291 291  
292 292  You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
... ... @@ -298,24 +298,11 @@
298 298  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
299 299  
300 300  
301 -= 5. How to configure the Lora Gateway =
230 += **5. How to configure the Lora Gateway** =
302 302  
303 -== 5.1 Configure and Debug LoRa wireless of LG01v2 ==
232 +== **5.1 Configure and Debug LoRa wireless of LG01v2** ==
304 304  
305 305  
306 -First, the user needs to access the Linux console of LG01v2 via ssh
307 -
308 -**IP address:  (% style="color:blue" %)IP address of LG01v2(%%)**
309 -
310 -**Port:  (% style="color:blue" %)22(%%)**
311 -
312 -**User Name:   (% style="color:blue" %)root(%%)**
313 -
314 -**Password:  (% style="color:blue" %)dragino(default)(%%)**
315 -
316 -[[image:image-20230504100722-3.png||height="228" width="908"]]
317 -
318 -
319 319  Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**:
320 320  
321 321  (% class="box infomessage" %)
... ... @@ -363,9 +363,9 @@
363 363  )))
364 364  
365 365  
366 -== 5.2 Example: LG01v2 ==
282 +== **5.2 Example: LG01v2** ==
367 367  
368 -=== 5.2.1 Introduce for the example: ===
284 +=== **5.2.1 Introduce for the example:** ===
369 369  
370 370  
371 371  [[image:image-20221104102736-3.png||height="282" width="723"]]
... ... @@ -376,7 +376,7 @@
376 376  * **LA66 Shield + UNO + DHT11**: The UNO will get the temperature and humidity and broadcast the value via LoRa protocol.
377 377  * **LG01v2** : LG01v2 is set to listening the LoRa Channel which LA66 is broadcasting. When LG01v2 get the data from LA66, LG01v2 will plot the data in built-in IoT server.
378 378  
379 -=== 5.2.2 Set Up LA66 Shield + UNO ===
295 +=== **5.2.2 Set Up LA66 Shield + UNO** ===
380 380  
381 381  
382 382  ==== **Set up LA66 Module** ====
... ... @@ -458,7 +458,7 @@
458 458  [[image:image-20221108175113-9.png||height="556" width="998"]]
459 459  
460 460  
461 -=== 5.2.3 Set Up LG01v2 ===
377 +=== **5.2.3 Set Up LG01v2** ===
462 462  
463 463  
464 464  Configure LG01v2 LoRa channel parameters so it can get data from LA66 Shield
... ... @@ -483,7 +483,7 @@
483 483  )))
484 484  
485 485  
486 -=== 5.2.4 Test result ===
402 +=== **5.2.4 Test result** ===
487 487  
488 488  
489 489  After the above configuration is complete, users can send test simulation data to check whether the configuration is correct, In LA66 sheild serial console send:(% style="color:red" %)**(AT+SEND=1,hello world,2,3).**
... ... @@ -500,7 +500,7 @@
500 500  [[image:image-20221108170314-3.png]]
501 501  
502 502  
503 -=== 5.2.5 Plot data chart in LG01v2 ===
419 +=== **5.2.5 Plot data chart in LG01v2** ===
504 504  
505 505  
506 506  User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
... ... @@ -517,16 +517,48 @@
517 517  [[image:image-20221108180458-11.png||height="402" width="1137"]]
518 518  
519 519  
436 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**v(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
520 520  
521 -= 6. OTA System Update =
522 522  
439 +(% style="color:blue" %)**USB TTL to LG01v2  Connection:**
523 523  
441 +
442 +Port 1 of the UART on the LG01v2 is GND
443 +
444 +(% class="box infomessage" %)
445 +(((
446 +**TXD  <~-~--> UART RXD (Gray line)**
447 +
448 +**RXD  <~-~--> UART TXD (White line)**
449 +
450 +**GND <~-~--> GND (Black line)**
451 +)))
452 +
453 +
454 +**LG01v2 UART connection photo**
455 +
456 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
457 +
458 +
459 +
460 +In the PC, you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LG01v2. LG01v2 will output system info once power on as below:
461 +
462 +
463 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
464 +
465 +
466 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
467 +
468 +
469 += **7. OTA System Update** =
470 +
471 +
524 524  LG01v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
525 525  
526 526  
527 -= 7. FAQ =
475 += **8. FAQ** =
528 528  
529 -== 7.1 How does LG01v2 communicate with Lora shield (LoRa.h) ==
477 +== **8.1 How does LG01v2 communicate with Lora shield (LoRa.h)** ==
530 530  
531 531  
532 532  This example describes how to use LG01v2, LoRa Shield to set up a LoRa network,
... ... @@ -575,7 +575,7 @@
575 575  [[image:image-20221101162527-4.png]]
576 576  
577 577  
578 -== 7.2 How does LG01v2 communicate with Heltec LoRa Node ==
526 +== **8.2 How does LG01v2 communicate with Heltec LoRa Node** ==
579 579  
580 580  
581 581  This example describes how to use LG01v2 and Heltec LoRa Node to set up a LoRa network,
... ... @@ -616,120 +616,27 @@
616 616  [[image:image-20221112163119-4.png||height="808" width="560"]]
617 617  
618 618  
619 -== 7.3 How does LG01v2 communicate with LoRaWAN node ==
567 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**9. Supports**(%%) =
620 620  
621 621  
622 -This example describes how to use LG01v2 and LSN50 to set up a  network,
623 -
624 -In this case, users need to set LSN50 to work in ABP mode and transmit in only one frequency.
625 -
626 -Assume we have a LG01v2 working in the frequency 868100000 now, below is the steps.
627 -
628 -
629 -**Step1: **Configure the LG01v2
630 -
631 -(% class="box infomessage" %)
632 632  (((
633 -AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
634 -AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
635 -AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
636 -AT+SYNCWORD=1  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
571 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
637 637  )))
638 638  
639 -**Step2:  **Run AT commands to make the LSN50 work in Single frequency and ABP mode. Below are the AT commands:
640 -
641 -(% class="box infomessage" %)
642 642  (((
643 -AT+FDR  ~-~--> Reset Parameters to Factory Default, Keys Reserve
644 -AT+NJM=0  ~-~-->  Set to ABP mode
645 -AT+ADR=0  ~-~-->  Set the Adaptive Data Rate Off
646 -AT+DR=0  ~-~--> Set Data Rate (Set AT+DR=3 for 915 band)
647 -AT+TDC=300000  ~-~-->  Set transmit interval to 5 minutes
648 -AT+CHS=868100000  ~-~--> Set transmit frequency to 868.1Mhz
649 -AT+DADDR=FFFFF111  ~-~--> Set Device Address to 26 01 1A F1
650 -ATZ  ~-~--> Reset MCU
651 -)))
575 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
652 652  
653 -**Step3:  **Check result
654 654  
578 += **10. Reference** =
655 655  
656 656  
657 -User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
658 -
659 -User can import this example in Node-Red: [[attach:LG01v2_LSN50v2_S31.json||target="_blank"]]
660 -
661 -
662 -First the user needs to fill in the NwkSkey and AppSkey in the LoraWan Packet Decrypter node.
663 -
664 -[[image:image-20230620103535-2.png||height="591" width="1138"]]
665 -
666 -[[image:image-20230620103153-1.png||height="610" width="1141"]]
667 -
668 -
669 -The data will be displayed in the built-in node-red UI
670 -
671 -**Browser input: (% style="background-color:yellow" %)__//http:~/~/<local-IPV4-address>//__(%%)**
672 -
673 -[[image:image-20230620103923-3.png||height="476" width="1138"]]
674 -
675 -
676 -== 7.4 How can users factory reset LG01v2 ==
677 -
678 -
679 -Users can download the image of LG01v2 from this link：[[dragino-lg01v2-1.7-0210>>https://www.dropbox.com/scl/fi/g0si61lcrvdjyto4ma951/dragino-lg01v2-1.7-0210.zip?rlkey=t03oqo493r2p7ign488rs2jsv&dl=0]]
680 -
681 -
682 -Then follow the steps in the link below to restore factory Settings to LG01v2：
683 -
684 -[[How to flash a new image(OS) to the gateway>>url:https://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
685 -
686 -
687 -= 8. Trouble Shooting =
688 -
689 -== 8.1  Fallback IP does not work, how can users check ==
690 -
691 -
692 -When the computer has completed the above fallback IP configuration,the LG01v2 Web UI is still not accessible via fallback IP.
693 -
694 -
695 -**1.Check whether the configuration is correct**
696 -
697 -Run the CMD command to ipconfig and ping 172.31.255.254.
698 -
699 -If this fails, the user needs to reconfigure.
700 -
701 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413170224-3.png?width=707&height=433&rev=1.1||alt="image-20230413170224-3.png"]]
702 -
703 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413170246-4.png?rev=1.1||alt="image-20230413170246-4.png"]]
704 -
705 -
706 -**2. Check whether the firewall is disabled**
707 -
708 -If the firewall is not down, this will affect access to the gateway.
709 -
710 -
711 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
712 -
713 -
714 -(((
715 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
716 -)))
717 -
718 -(((
719 -With your question as detailed as possible. We will reply and help you in the shortest.
720 -
721 -
722 -= 10. Reference =
723 -
724 -
725 725  * Install Tago Core: Refer **Install Tago Core in LG01v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
726 -
727 727  * [[Advance OS Reference Guide for L>>doc:Main.Armbian OS instruction.WebHome]]G01v2.
728 728  
729 729  
730 730  )))
731 731  
732 -= 11. Order Info =
587 += **11. Order Info** =
733 733  
734 734  
735 735  (% style="color:#0000ff" %)**LG01v2-XXX-YYY**
... ... @@ -741,15 +741,15 @@
741 741  
742 742  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
743 743  
744 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
745 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America: Verizon, AT&T(FirstNet), U.S.Cellular; Canada: Telus
746 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
747 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
599 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
600 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
601 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
602 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
748 748  
749 749  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
750 750  
751 751  
752 -= 12. Manufacturer Info =
607 += **12. Manufacturer Info** =
753 753  
754 754  
755 755  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -759,7 +759,7 @@
759 759  LongCheng Street, LongGang District ; Shenzhen 518116,China
760 760  
761 761  
762 -= 13. FCC Warning =
617 += **13. FCC Warning** =
763 763  
764 764  
765 765  (((
LG01v2_LSN50v2_S31.json
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -16.5 KB
Content
... ... @@ -1,587 +1,0 @@
1 -[
2 - {
3 - "id": "5e07f5eeeb2a969b",
4 - "type": "tab",
5 - "label": "流程 1",
6 - "disabled": false,
7 - "info": "",
8 - "env": []
9 - },
10 - {
11 - "id": "9c26fa2f19e2b556",
12 - "type": "function",
13 - "z": "5e07f5eeeb2a969b",
14 - "name": "hex to base64",
15 - "func": "var input = msg.payload;\nvar base64 = Buffer.from(input, 'hex').toString('base64');\nmsg.payload = base64;\nreturn msg;",
16 - "outputs": 1,
17 - "noerr": 0,
18 - "initialize": "",
19 - "finalize": "",
20 - "libs": [],
21 - "x": 220,
22 - "y": 160,
23 - "wires": [
24 - [
25 - "075bc9172a4c6570",
26 - "3601a98894805fbe"
27 - ]
28 - ]
29 - },
30 - {
31 - "id": "ee0480c81e66d657",
32 - "type": "function",
33 - "z": "5e07f5eeeb2a969b",
34 - "name": "function 4",
35 - "func": "var bytes = msg.payload[\"uplink_message\"]\nvar data = msg.payload[\"out\"]\nvar mode = (parseInt(data.substring(12, 14), 16) & 0x7C) >> 2;\nif (mode != 2)\n{\nvar bat = (parseInt(data.substring(0,4),16)&0x3FFF)/1000;\nvar TempC1 = (parseFloat(parseInt(data.substring(4, 8),16)/10).toFixed(2));\nvar ADC_CH0V = (parseInt(data.substring(8, 12), 16) ) / 1000;\nvar Digital_IStatus = (parseInt((data.substring(8, 12),16) & 0x02))?\"H\":\"L\"; \n\nif (mode != 6) {\n\n var EXTI_Trigger = ((parseInt(data.substring(12, 14), 16) & 0x01))? \"TRUE\" : \"FALSE\";\n\n var Door_status = ((parseInt(data.substring(12, 14), 16) & 0x80))? \"CLOSE\" : \"OPEN\";\n\n}\n}\nif (mode == 0) {\n\n var Work_mode = \"IIC\";\n\n if ((parseInt(data.substring(18, 22), 16)) == 0){\n\n var Illum = (parseInt(data.substring(8, 12), 16));\n\n }\n\n else {\n\n var TempC_SHT = parseFloat(((parseInt(data.substring(14, 18), 16)) / 10).toFixed(2));\n\n var Hum_SHT = parseFloat((((parseInt(data.substring(18, 22), 16))) / 10).toFixed(1));\n\n }\n \n}\n\nelse if (mode == 1) {\n\n var Work_mode = \" Distance\";\n\n var Distance_cm = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(1));\n\n if (((parseInt(data.substring(18, 22), 16))) != 65535){\n\n var Distance_signal_strength = parseFloat(((parseInt(data.substring(18, 22), 16))).toFixed(0));\n\n }\n\n}\n\nelse if (mode == 2) {\n\n var Work_mode = \" 3ADC\";\n\n var BatV = (parseInt(data.substring(18, 22), 16)) / 10;\n\n var ADC_CH0V = ((parseInt(data.substring(0, 4), 16))) / 1000;\n\n var ADC_CH1V = ((parseInt(data.substring(4, 8), 16))) / 1000;\n\n var ADC_CH4V = ((parseInt(data.substring(8, 12), 16))) / 1000;\n\n var Digital_IStatus = ((parseInt(data.substring(12, 14), 16)) & 0x02) ? \"H\" : \"L\";\n\n var EXTI_Trigger = ((parseInt(data.substring(12, 14), 16)) & 0x01) ? \"TRUE\" : \"FALSE\";\n\n var Door_status = ((parseInt(data.substring(13, 14), 16)) & 0x80) ? \"CLOSE\" : \"OPEN\";\n\n if ((parseInt(data.substring(18, 22), 16) === 0)) {\n\n var Illum = ((parseInt(data.substring(14, 18), 16)));\n\n }\n\n else {\n\n var TempC_SHT = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(2));\n\n var Hum_SHT = parseFloat((((parseInt(data.substring(18, 24), 16))) / 10).toFixed(1));\n\n }\n\n}\n\nelse if (mode == 3) {\n\n var Work_mode = \"3DS18B20\";\n\n var TempC2 = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(2));\n\n var TempC3 = parseFloat((((parseInt(data.substring(18, 24), 16))) / 10).toFixed(1));\n\n\n\n}\n\nelse if (mode == 4) {\n\n var Work_mode = \"Weight\";\n\n var Weight = ((parseInt(data.substring(14, 18), 16)));\n\n}\n\nelse if (mode == 5) {\n\n var Work_mode = \"Count\";\n\n var Count = ((parseInt(data.substring(14, 22), 16)));\n\n}\n\n\n\nvar b = { payload: bat }, c = { payload: TempC1 }, d = { payload: ADC_CH0V }, e = { payload: Digital_IStatus }, f = { payload: EXTI_Trigger }, g = { payload: Door_status }, j = { payload: TempC_SHT }, s = { payload: Hum_SHT }, k = { payload: Work_mode };\nreturn [b,c,d,e,f,g,j,k,s];",
36 - "outputs": 9,
37 - "noerr": 0,
38 - "initialize": "",
39 - "finalize": "",
40 - "libs": [],
41 - "x": 660,
42 - "y": 300,
43 - "wires": [
44 - [
45 - "fd22b92d2b8de0fb"
46 - ],
47 - [
48 - "3307256a4e1ea53a"
49 - ],
50 - [
51 - "a3fd8302ec399e31"
52 - ],
53 - [
54 - "c7d1f63ff5f0026a"
55 - ],
56 - [
57 - "159967056da52706"
58 - ],
59 - [
60 - "a21581a41adc1714"
61 - ],
62 - [
63 - "7bb78b78445ac9e3"
64 - ],
65 - [
66 - "0364752170ed6228"
67 - ],
68 - [
69 - "65293155d71d54b9"
70 - ]
71 - ]
72 - },
73 - {
74 - "id": "e763b293d42dbdd5",
75 - "type": "change",
76 - "z": "5e07f5eeeb2a969b",
77 - "name": "",
78 - "rules": [
79 - {
80 - "t": "change",
81 - "p": "payload",
82 - "pt": "msg",
83 - "from": "Data: (HEX:)",
84 - "fromt": "str",
85 - "to": "",
86 - "tot": "str"
87 - },
88 - {
89 - "t": "change",
90 - "p": "payload",
91 - "pt": "msg",
92 - "from": " ",
93 - "fromt": "str",
94 - "to": "",
95 - "tot": "str"
96 - }
97 - ],
98 - "action": "",
99 - "property": "",
100 - "from": "",
101 - "to": "",
102 - "reg": false,
103 - "x": 420,
104 - "y": 60,
105 - "wires": [
106 - [
107 - "9c26fa2f19e2b556",
108 - "416a930e89291528"
109 - ]
110 - ]
111 - },
112 - {
113 - "id": "075bc9172a4c6570",
114 - "type": "lorawan-packet-decrypt-nwkey-appkey",
115 - "z": "5e07f5eeeb2a969b",
116 - "name": "FFFFF111",
117 - "nsw": "CCFFFFFFFFFFFFFFFFFFFFFFFFFFFFAA",
118 - "asw": "FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCC",
119 - "x": 510,
120 - "y": 160,
121 - "wires": [
122 - [
123 - "ee0480c81e66d657"
124 - ]
125 - ]
126 - },
127 - {
128 - "id": "13dc77a4e2bb4f72",
129 - "type": "serial in",
130 - "z": "5e07f5eeeb2a969b",
131 - "name": "",
132 - "serial": "bb1c0e81fd51fa9e",
133 - "x": 190,
134 - "y": 60,
135 - "wires": [
136 - [
137 - "e763b293d42dbdd5"
138 - ]
139 - ]
140 - },
141 - {
142 - "id": "3307256a4e1ea53a",
143 - "type": "ui_chart",
144 - "z": "5e07f5eeeb2a969b",
145 - "name": "",
146 - "group": "c1fddd37879528e5",
147 - "order": 1,
148 - "width": 0,
149 - "height": 0,
150 - "label": "TempC1",
151 - "chartType": "line",
152 - "legend": "false",
153 - "xformat": "HH:mm:ss",
154 - "interpolate": "linear",
155 - "nodata": "",
156 - "dot": false,
157 - "ymin": "",
158 - "ymax": "",
159 - "removeOlder": 1,
160 - "removeOlderPoints": "",
161 - "removeOlderUnit": "3600",
162 - "cutout": 0,
163 - "useOneColor": false,
164 - "useUTC": false,
165 - "colors": [
166 - "#1f77b4",
167 - "#aec7e8",
168 - "#ff7f0e",
169 - "#2ca02c",
170 - "#98df8a",
171 - "#d62728",
172 - "#ff9896",
173 - "#9467bd",
174 - "#c5b0d5"
175 - ],
176 - "outputs": 1,
177 - "useDifferentColor": false,
178 - "className": "",
179 - "x": 940,
180 - "y": 160,
181 - "wires": [
182 - []
183 - ]
184 - },
185 - {
186 - "id": "a3fd8302ec399e31",
187 - "type": "ui_chart",
188 - "z": "5e07f5eeeb2a969b",
189 - "name": "",
190 - "group": "6d46fdae9f413f7b",
191 - "order": 1,
192 - "width": 0,
193 - "height": 0,
194 - "label": "ADC_CH0V",
195 - "chartType": "line",
196 - "legend": "false",
197 - "xformat": "HH:mm:ss",
198 - "interpolate": "linear",
199 - "nodata": "",
200 - "dot": false,
201 - "ymin": "",
202 - "ymax": "",
203 - "removeOlder": 1,
204 - "removeOlderPoints": "",
205 - "removeOlderUnit": "3600",
206 - "cutout": 0,
207 - "useOneColor": false,
208 - "useUTC": false,
209 - "colors": [
210 - "#1f77b4",
211 - "#aec7e8",
212 - "#ff7f0e",
213 - "#2ca02c",
214 - "#98df8a",
215 - "#d62728",
216 - "#ff9896",
217 - "#9467bd",
218 - "#c5b0d5"
219 - ],
220 - "outputs": 1,
221 - "useDifferentColor": false,
222 - "className": "",
223 - "x": 950,
224 - "y": 200,
225 - "wires": [
226 - []
227 - ]
228 - },
229 - {
230 - "id": "fd22b92d2b8de0fb",
231 - "type": "ui_chart",
232 - "z": "5e07f5eeeb2a969b",
233 - "name": "",
234 - "group": "bb5657c2a8c290a3",
235 - "order": 1,
236 - "width": 0,
237 - "height": 0,
238 - "label": "BatV",
239 - "chartType": "line",
240 - "legend": "false",
241 - "xformat": "HH:mm:ss",
242 - "interpolate": "linear",
243 - "nodata": "",
244 - "dot": false,
245 - "ymin": "",
246 - "ymax": "",
247 - "removeOlder": 1,
248 - "removeOlderPoints": "",
249 - "removeOlderUnit": "3600",
250 - "cutout": 0,
251 - "useOneColor": false,
252 - "useUTC": false,
253 - "colors": [
254 - "#1f77b4",
255 - "#aec7e8",
256 - "#ff7f0e",
257 - "#2ca02c",
258 - "#98df8a",
259 - "#d62728",
260 - "#ff9896",
261 - "#9467bd",
262 - "#c5b0d5"
263 - ],
264 - "outputs": 1,
265 - "useDifferentColor": false,
266 - "className": "",
267 - "x": 930,
268 - "y": 120,
269 - "wires": [
270 - []
271 - ]
272 - },
273 - {
274 - "id": "c7d1f63ff5f0026a",
275 - "type": "ui_text",
276 - "z": "5e07f5eeeb2a969b",
277 - "group": "528e965cef294158",
278 - "order": 0,
279 - "width": "6",
280 - "height": "4",
281 - "name": "",
282 - "label": "Digital_IStatus",
283 - "format": "{{msg.payload}}",
284 - "layout": "col-center",
285 - "className": "",
286 - "x": 960,
287 - "y": 240,
288 - "wires": []
289 - },
290 - {
291 - "id": "159967056da52706",
292 - "type": "ui_text",
293 - "z": "5e07f5eeeb2a969b",
294 - "group": "5e615e3edb5999a0",
295 - "order": 0,
296 - "width": "6",
297 - "height": "4",
298 - "name": "",
299 - "label": "EXTI_Trigger",
300 - "format": "{{msg.payload}}",
301 - "layout": "col-center",
302 - "className": "",
303 - "x": 950,
304 - "y": 280,
305 - "wires": []
306 - },
307 - {
308 - "id": "7bb78b78445ac9e3",
309 - "type": "ui_chart",
310 - "z": "5e07f5eeeb2a969b",
311 - "name": "",
312 - "group": "5f7fec85295a7f7c",
313 - "order": 0,
314 - "width": 0,
315 - "height": 0,
316 - "label": "TempC_SHT",
317 - "chartType": "line",
318 - "legend": "false",
319 - "xformat": "HH:mm:ss",
320 - "interpolate": "linear",
321 - "nodata": "",
322 - "dot": false,
323 - "ymin": "",
324 - "ymax": "",
325 - "removeOlder": 1,
326 - "removeOlderPoints": "",
327 - "removeOlderUnit": "3600",
328 - "cutout": 0,
329 - "useOneColor": false,
330 - "useUTC": false,
331 - "colors": [
332 - "#1f77b4",
333 - "#aec7e8",
334 - "#ff7f0e",
335 - "#2ca02c",
336 - "#98df8a",
337 - "#d62728",
338 - "#ff9896",
339 - "#9467bd",
340 - "#c5b0d5"
341 - ],
342 - "outputs": 1,
343 - "useDifferentColor": false,
344 - "className": "",
345 - "x": 950,
346 - "y": 360,
347 - "wires": [
348 - []
349 - ]
350 - },
351 - {
352 - "id": "0364752170ed6228",
353 - "type": "ui_text",
354 - "z": "5e07f5eeeb2a969b",
355 - "group": "3cb616f18674c42a",
356 - "order": 0,
357 - "width": "6",
358 - "height": "4",
359 - "name": "",
360 - "label": "Work_mode",
361 - "format": "{{msg.payload}}",
362 - "layout": "col-center",
363 - "className": "",
364 - "x": 950,
365 - "y": 400,
366 - "wires": []
367 - },
368 - {
369 - "id": "65293155d71d54b9",
370 - "type": "ui_chart",
371 - "z": "5e07f5eeeb2a969b",
372 - "name": "",
373 - "group": "bb2e35e7a931c198",
374 - "order": 0,
375 - "width": 0,
376 - "height": 0,
377 - "label": "Hum_SHT",
378 - "chartType": "line",
379 - "legend": "false",
380 - "xformat": "HH:mm:ss",
381 - "interpolate": "linear",
382 - "nodata": "",
383 - "dot": false,
384 - "ymin": "",
385 - "ymax": "",
386 - "removeOlder": 1,
387 - "removeOlderPoints": "",
388 - "removeOlderUnit": "3600",
389 - "cutout": 0,
390 - "useOneColor": false,
391 - "useUTC": false,
392 - "colors": [
393 - "#1f77b4",
394 - "#aec7e8",
395 - "#ff7f0e",
396 - "#2ca02c",
397 - "#98df8a",
398 - "#d62728",
399 - "#ff9896",
400 - "#9467bd",
401 - "#c5b0d5"
402 - ],
403 - "outputs": 1,
404 - "useDifferentColor": false,
405 - "className": "",
406 - "x": 950,
407 - "y": 440,
408 - "wires": [
409 - []
410 - ]
411 - },
412 - {
413 - "id": "a21581a41adc1714",
414 - "type": "ui_text",
415 - "z": "5e07f5eeeb2a969b",
416 - "group": "9109ae41eee353df",
417 - "order": 0,
418 - "width": "6",
419 - "height": "4",
420 - "name": "",
421 - "label": "Door_status",
422 - "format": "{{msg.payload}}",
423 - "layout": "col-center",
424 - "className": "",
425 - "x": 950,
426 - "y": 320,
427 - "wires": []
428 - },
429 - {
430 - "id": "416a930e89291528",
431 - "type": "debug",
432 - "z": "5e07f5eeeb2a969b",
433 - "name": "debug 2",
434 - "active": true,
435 - "tosidebar": true,
436 - "console": false,
437 - "tostatus": false,
438 - "complete": "false",
439 - "statusVal": "",
440 - "statusType": "auto",
441 - "x": 660,
442 - "y": 60,
443 - "wires": []
444 - },
445 - {
446 - "id": "3601a98894805fbe",
447 - "type": "debug",
448 - "z": "5e07f5eeeb2a969b",
449 - "name": "debug 3",
450 - "active": true,
451 - "tosidebar": true,
452 - "console": false,
453 - "tostatus": false,
454 - "complete": "false",
455 - "statusVal": "",
456 - "statusType": "auto",
457 - "x": 380,
458 - "y": 240,
459 - "wires": []
460 - },
461 - {
462 - "id": "bb1c0e81fd51fa9e",
463 - "type": "serial-port",
464 - "serialport": "/dev/ttyUSB0",
465 - "serialbaud": "9600",
466 - "databits": "8",
467 - "parity": "none",
468 - "stopbits": "1",
469 - "waitfor": "",
470 - "dtr": "none",
471 - "rts": "none",
472 - "cts": "none",
473 - "dsr": "none",
474 - "newline": "\\n",
475 - "bin": "false",
476 - "out": "char",
477 - "addchar": "\\r\\n",
478 - "responsetimeout": "10000"
479 - },
480 - {
481 - "id": "c1fddd37879528e5",
482 - "type": "ui_group",
483 - "name": "BatV",
484 - "tab": "abb98f80600a5448",
485 - "order": 1,
486 - "disp": true,
487 - "width": "6",
488 - "collapse": false,
489 - "className": ""
490 - },
491 - {
492 - "id": "6d46fdae9f413f7b",
493 - "type": "ui_group",
494 - "name": "ADC_CH0V",
495 - "tab": "abb98f80600a5448",
496 - "order": 1,
497 - "disp": true,
498 - "width": "6",
499 - "collapse": false,
500 - "className": ""
501 - },
502 - {
503 - "id": "bb5657c2a8c290a3",
504 - "type": "ui_group",
505 - "name": "BatV",
506 - "tab": "abb98f80600a5448",
507 - "order": 3,
508 - "disp": true,
509 - "width": "6",
510 - "collapse": false,
511 - "className": ""
512 - },
513 - {
514 - "id": "528e965cef294158",
515 - "type": "ui_group",
516 - "name": "Digital_IStatus",
517 - "tab": "abb98f80600a5448",
518 - "order": 4,
519 - "disp": true,
520 - "width": "6",
521 - "collapse": false,
522 - "className": ""
523 - },
524 - {
525 - "id": "5e615e3edb5999a0",
526 - "type": "ui_group",
527 - "name": "EXTI_Trigger",
528 - "tab": "abb98f80600a5448",
529 - "order": 5,
530 - "disp": true,
531 - "width": "6",
532 - "collapse": false,
533 - "className": ""
534 - },
535 - {
536 - "id": "5f7fec85295a7f7c",
537 - "type": "ui_group",
538 - "name": "TempC_SHT",
539 - "tab": "abb98f80600a5448",
540 - "order": 6,
541 - "disp": true,
542 - "width": "6",
543 - "collapse": false,
544 - "className": ""
545 - },
546 - {
547 - "id": "3cb616f18674c42a",
548 - "type": "ui_group",
549 - "name": "Work_mode",
550 - "tab": "abb98f80600a5448",
551 - "order": 7,
552 - "disp": true,
553 - "width": "6",
554 - "collapse": false,
555 - "className": ""
556 - },
557 - {
558 - "id": "bb2e35e7a931c198",
559 - "type": "ui_group",
560 - "name": "Hum_SHT",
561 - "tab": "abb98f80600a5448",
562 - "order": 8,
563 - "disp": true,
564 - "width": "6",
565 - "collapse": false,
566 - "className": ""
567 - },
568 - {
569 - "id": "9109ae41eee353df",
570 - "type": "ui_group",
571 - "name": "Door_status",
572 - "tab": "abb98f80600a5448",
573 - "order": 9,
574 - "disp": true,
575 - "width": "6",
576 - "collapse": false,
577 - "className": ""
578 - },
579 - {
580 - "id": "abb98f80600a5448",
581 - "type": "ui_tab",
582 - "name": "LSN50v2 S31",
583 - "icon": "LSN50v2 S31",
584 - "disabled": false,
585 - "hidden": false
586 - }
587 -]
image-20230504100722-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.5 KB
Content
image-20230506110646-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -383.1 KB
Content
image-20230506113332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20230506113432-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -36.5 KB
Content
image-20230506113531-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -403.2 KB
Content
image-20230506113602-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -26.7 KB
Content
image-20230506113623-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.4 KB
Content
image-20230506113705-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -40.9 KB
Content
image-20230506113722-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.2 KB
Content
image-20230506113737-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20230506113813-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -39.5 KB
Content
image-20230506113831-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -32.2 KB
Content
image-20230506114127-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.1 KB
Content
image-20230506115438-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -413.6 KB
Content
image-20230620103153-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -127.6 KB
Content
image-20230620103535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -156.3 KB
Content
image-20230620103923-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -72.7 KB
Content
image-20231014092843-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -596 bytes
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0