Last modified by Kilight Cao on 2024/10/12 08:58
<
From version < 139.1 >
edited by Kilight Cao
on 2023/06/20 10:40
To version < 102.1 >
edited by Edwin Chen
on 2022/11/14 19:41
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Edwin
Content
... ... @@ -11,33 +11,26 @@
11 11  
12 12  {{toc/}}
13 13  
14 += **1. Introduction** =
14 14  
15 15  
17 +== **1.1 What is LG01-V2** ==
16 16  
17 17  
18 -
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LG01v2 ==
22 -
23 -
24 24  (((
25 25  (((
26 -The LG01v2 is an (% style="color:blue" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 -
28 -LG01v2 is specially design for (% style="color:blue" %)**peer to peer LoRa**(%%) protocol instead of LoRaWAN protocol. The LG01v2 use single channel LoRa module to minimize the deployment cost for a private p2p LoRa wireless network.
22 +The LG01-V2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
29 29  )))
30 30  
31 31  (((
32 -LG01v2 uses Open Source Linux system. User can modify the Linux part and develop customize software base on it. It has (% style="color:blue" %)**1.2Ghz Quad-Core CPU**(%%) , (% style="color:blue" %)**4GB eMMC storage**(%%) and (% style="color:blue" %)**512MB RAM**(%%) for most application.
33 -
34 -LG01v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
26 +LG01-V2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
35 35  )))
36 36  
37 37  
38 -== 1.2 Specifications ==
39 39  
31 +== **1.2 Specifications** ==
40 40  
33 +
41 41  (% style="color:#037691" %)**Hardware System:**
42 42  
43 43  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -55,7 +55,7 @@
55 55  * Storage Temperature: -20 ~~ 65°C
56 56  * Power Input: 5V, 2A, DC
57 57  
58 -== 1.3 Features ==
51 +== **1.3 Features** ==
59 59  
60 60  
61 61  * Open Source Debian system
... ... @@ -63,65 +63,69 @@
63 63  * Remote Management
64 64  * Auto-provisioning for batch deployment and management
65 65  * LoRa Gateway
59 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
66 66  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
67 67  
68 -== 1.4 Block Diagram ==
62 +== **1.4 Block Diagram** ==
69 69  
70 70  
71 71  
72 -== 1.5 LED Indicators ==
66 +== **1.5 LED Indicators** ==
73 73  
74 74  
75 75  LG01-V2 has totally four LEDs, They are:
76 76  
77 77  
78 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
72 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
79 79  
80 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
74 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
81 81  
82 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
76 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
83 83  
84 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
78 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
85 85  
86 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
80 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
87 87  
88 - ✓** SOLID RED:** Device doesn't have an Internet connection.
82 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
89 89  
90 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
84 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
91 91  
92 92  
93 -== 1.6 Button Intruction ==
94 94  
88 +== **1.6 Button Intruction** ==
95 95  
90 +
96 96  LG01-V2 has a black toggle button, which is:
97 97  
98 98  
99 -(% style="color:blue" %)**➢ Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
94 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
100 100  
101 - **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
96 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
102 102  
103 103  
104 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
99 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
105 105  
106 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
101 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
107 107  
108 108  
109 -= 2. Quick Start =
110 110  
105 += **2. Quick Start** =
111 111  
107 +
112 112  The LG01-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
113 113  
114 114  In most cases, the first thing you need to do is make the LG01-v2 accessible to the network.
115 115  
116 116  
117 -== 2.1 Access and Configure LG01-v2 ==
113 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
118 118  
119 -=== 2.1.1 Find IP address of LG01-v2 ===
120 120  
116 +== **2.1.1 connect the network.** ==
121 121  
122 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
123 123  
119 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
124 124  
121 +
125 125  Connect the LG01-V2 Ethernet port to your router and LG01-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01-V2.
126 126  
127 127  You can also use this IP to connect.
... ... @@ -129,38 +129,10 @@
129 129  
130 130  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100129-1.png?width=1263&height=332&rev=1.1||alt="image-20220622100129-1.png"]]
131 131  
132 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via LG01v2 Fallback IP ====
133 133  
134 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230107084650-2.png?width=839&height=310&rev=1.1||alt="image-20230107084650-2.png" height="284" width="769"]]
130 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
135 135  
136 136  
137 -**Steps to connect via fallback IP:**
138 -
139 -~1. Connect the PC's Ethernet port to LG01v2's WAN port
140 -
141 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
142 -
143 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
144 -
145 -
146 -As in the below photo:
147 -
148 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413172038-1.png?width=1243&height=732&rev=1.1||alt="image-20230413172038-1.png" height="624" width="1059"]]
149 -
150 -
151 -Configure computer Ethernet port steps video: **[[fallback ip.mp4>>url:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/fallback%20ip.mp4?rev=1.1]]**
152 -
153 -If you still can't access the LG01v2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/LG01v2/#H10.1A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
154 -
155 -3. In the PC, use IP address 172.31.255.254 to access the LG01v2 via Web or Console.
156 -
157 -[[image:image-20230506115438-13.png||height="554" width="1047"]]
158 -
159 -
160 -
161 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ====
162 -
163 -
164 164  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100542-2.png?width=1256&height=369&rev=1.1||alt="image-20220622100542-2.png"]]
165 165  
166 166  
... ... @@ -167,111 +167,74 @@
167 167  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
168 168  
169 169  
170 -[[image:image-20230506113332-2.png]]
139 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102702-6.png?rev=1.1||alt="image-20220622102702-6.png"]]
171 171  
172 172  
173 173  **Wi-Fi configuration successful**
174 174  
175 175  
176 -[[image:image-20230506113432-3.png||height="397" width="855"]]
145 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102847-7.png?rev=1.1||alt="image-20220622102847-7.png"]]
177 177  
178 178  
179 -=== 2.1.2 Access Configure Web UI ===
180 180  
149 += **3. Web Configure Pages** =
181 181  
182 -**Web Interface**
151 +== **3.1 Home** ==
183 183  
184 -Open a browser on the PC and type the LG01v2 ip address (depends on your connect method)
153 +//Shows the system running status~://
185 185  
155 +[[image:image-20221104155612-1.png||height="497" width="942"]]
186 186  
187 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
188 188  
189 -You will see the login interface of LG01v2 as shown below.
158 +== **3.2 Network Settings** ==
190 190  
191 -The account details for Web Login are:
192 192  
193 -(% style="color:#4f81bd" %)**User Name: root**
161 +=== **3.2.1 Network ~-~-> WiFi** ===
194 194  
195 -(% style="color:#4f81bd" %)**Password:   dragino**
196 196  
197 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230106153501-1.png?width=894&height=367&rev=1.1||alt="image-20230106153501-1.png"]]
164 +[[image:image-20221104155654-2.png||height="319" width="813"]]
198 198  
199 199  
200 -= 3. Web Configure Pages =
201 201  
202 -== 3.1 Home ==
168 +=== **3.4.2 Network ~-~-> System Status** ===
203 203  
204 204  
205 -Shows the system running status:
171 +[[image:image-20221104155724-3.png||height="679" width="861"]]
206 206  
207 -[[image:image-20230506113531-4.png||height="430" width="818"]]
208 208  
209 209  
210 -== 3.2 Network Settings ==
175 +=== **3.4.3 Network ~-~-> Firewall** ===
211 211  
212 -=== 3.2.1 Network ~-~-> WiFi ===
213 213  
178 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616115351-6.png?width=661&height=244&rev=1.1||alt="image-20220616115351-6.png"]]
214 214  
215 -[[image:image-20230506113602-5.png]]
216 216  
217 217  
218 -=== 3.4.2 Network ~-~-> System Status ===
182 +== **3.5 System** ==
219 219  
220 220  
221 -[[image:image-20230506113623-6.png||height="511" width="672"]]
185 +=== **3.5.1  System ~-~-> System Overview** ===
222 222  
223 223  
224 -== 3.5 System ==
225 -
226 -=== 3.5.1  System ~-~-> System Overview ===
227 -
228 -
229 229  Shows the system info:
230 230  
231 -[[image:image-20230506113705-7.png]]
190 +[[image:image-20221104155907-4.png]]
232 232  
233 233  
234 -=== 3.5.2 System ~-~-> Backup/Restore ===
235 235  
194 +=== **3.5.2 System ~-~-> Backup/Restore** ===
236 236  
237 -[[image:image-20230506113722-8.png||height="254" width="797"]]
238 238  
197 +[[image:image-20221104155928-5.png||height="334" width="880"]]
239 239  
240 -=== 3.5.3 System ~-~-> System General ===
241 241  
200 += (% id="cke_bm_1978S" style="display:none" %)** **(%%)**4. Build in Server** =
242 242  
243 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
244 244  
245 -In addition, Users can customize the FallBack IP address.
246 -
247 -[[image:image-20230506113813-10.png||height="659" width="749"]]
248 -
249 -
250 -=== 3.5.4 System ~-~-> Remoteit ===
251 -
252 -
253 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
254 -
255 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
256 -
257 -[[image:image-20230506113831-11.png||height="567" width="748"]]
258 -
259 -
260 -=== 3.5.5 System ~-~-> Package Management ===
261 -
262 -
263 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
264 -
265 -[[image:image-20230506114127-12.png||height="803" width="762"]]
266 -
267 -
268 -= (% id="cke_bm_1978S" style="display:none" %) (%%)4. Build in Server =
269 -
270 -
271 271  The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
272 272  
273 273  
274 -[[image:image-20230506113737-9.png]]
206 +[[image:image-20221104155949-6.png||height="315" width="1023"]]
275 275  
276 276  
277 277  (% style="color:red" %)**Note:**
... ... @@ -279,16 +279,18 @@
279 279   **Path**: System ~-~-> Built-in Server
280 280  
281 281  
282 -(% style="color:blue" %)**Troubleshooting：**
214 +**Troubleshooting:**
283 283  
216 +
284 284  **~ 1. URL does not jump properly**
285 285  
286 286   For the Node-Red, you can use the local IP address and the port is 1880 to access it.
287 287  
288 288  
289 -== 4.1 Application Server ~-~- Node-Red ==
290 290  
223 +== **4.1 Application Server ~-~- Node-Red** ==
291 291  
225 +
292 292  You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
293 293  
294 294  
... ... @@ -298,24 +298,12 @@
298 298  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
299 299  
300 300  
301 -= 5. How to configure the Lora Gateway =
235 += **5. How to configure the Lora Gateway** =
302 302  
303 -== 5.1 Configure and Debug LoRa wireless of LG01v2 ==
304 304  
238 +== **5.1 Configure and Debug LoRa wireless of LG01v2** ==
305 305  
306 -First, the user needs to access the Linux console of LG01v2 via ssh
307 307  
308 -**IP address:  (% style="color:blue" %)IP address of LG01v2(%%)**
309 -
310 -**Port:  (% style="color:blue" %)22(%%)**
311 -
312 -**User Name:   (% style="color:blue" %)root(%%)**
313 -
314 -**Password:  (% style="color:blue" %)dragino(default)(%%)**
315 -
316 -[[image:image-20230504100722-3.png||height="228" width="908"]]
317 -
318 -
319 319  Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**:
320 320  
321 321  (% class="box infomessage" %)
... ... @@ -336,9 +336,7 @@
336 336  )))
337 337  
338 338  
339 -(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**
340 -
341 -
261 +(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**(%%)
342 342  (% style="color:red" %)[[image:image-20221029174703-3.png]]
343 343  
344 344  
... ... @@ -347,27 +347,26 @@
347 347  
348 348  (% class="box infomessage" %)
349 349  (((
350 -**AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
351 -AT+GROUPMOD=0,0  ~-~-->  TX and RX group
352 -AT+BW=0,0  ~-~-->  TX and RX Bandwidth
353 -AT+SF=12,12  ~-~-->  TX and RX Spreading Factor
354 -AT+POWER=14  ~-~-->  TX Power Range
355 -AT+CRC=1,1  ~-~-->  TX and RX CRC Type
356 -AT+HEADER=0,0  ~-~-->  TX and RX Header Type
357 -AT+CR=1,1  ~-~-->  TX and RX Coding Rate
358 -AT+IQ=0,0  ~-~-->  TX and RX InvertIQ
359 -AT+PREAMBLE=8,8  ~-~-->  TX and RX Preamble Length
360 -AT+SYNCWORD=0  ~-~-->  Syncword(0: private，1: public)
361 -AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
362 -AT+RXDAFORM=1**                              
270 +AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
271 +AT+GROUPMOD=0,0  ~-~--> TX and RX group
272 +AT+BW=0,0  ~-~--> TX and RX Bandwidth
273 +AT+SF=12,12  ~-~--> TX and RX Spreading Factor
274 +AT+POWER=14  ~-~--> TX Power Range
275 +AT+CRC=1,1  ~-~--> TX and RX CRC Type
276 +AT+HEADER=0,0  ~-~--> TX and RX Header Type
277 +AT+CR=1,1  ~-~--> TX and RX Coding Rate
278 +AT+IQ=0,0  ~-~--> TX and RX InvertIQ
279 +AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length
280 +AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
281 +AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
282 +AT+RXDAFORM=1                              
363 363  )))
364 364  
365 365  
366 -== 5.2 Example: LG01v2 ==
286 +== **5.2 Example: LG01v2** ==
367 367  
368 -=== 5.2.1 Introduce for the example: ===
288 +=== **5.2.1 Introduce for the example:** ===
369 369  
370 -
371 371  [[image:image-20221104102736-3.png||height="282" width="723"]]
372 372  
373 373  
... ... @@ -381,7 +381,6 @@
381 381  
382 382  ==== **Set up LA66 Module** ====
383 383  
384 -
385 385  LA66 Module is loaded with the firmware **[[LA66 Peer-to-Peer firmware>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]] **and user can use AT Command to set up LA66 with below parameters:
386 386  
387 387  (((
... ... @@ -406,13 +406,10 @@
406 406  )))
407 407  
408 408  
409 -
410 410  ==== **Set up Arduino UNO** ====
411 411  
412 -(% id="cke_bm_1033249S" style="display:none" %)** **
329 +(% id="cke_bm_1033249S" style="display:none" %)** **(%%)**Hardware Connection**
413 413  
414 -**Hardware Connection**
415 -
416 416  (% class="box infomessage" %)
417 417  (((
418 418  **The DHT11 sensor connects to the LA66 Shield:**
... ... @@ -425,17 +425,13 @@
425 425  [[image:image-20221108170731-5.png||height="588" width="441"]]
426 426  
427 427  
428 -
429 429  ===== **1. Open Arduino IDE** =====
430 430  
431 -
432 432  [[image:image-20221108172149-6.png||height="650" width="542"]]
433 433  
434 434  
435 -
436 436  ===== **2. Open project** =====
437 437  
438 -
439 439  Users can download Arduino files from this link: [[attach:Log-Temperature-Sensor-and-send-data-to-Node-red.ino||target="_blank"]]
440 440  
441 441  Then click Compile and Upload to LA66 Shield,
... ... @@ -443,21 +443,19 @@
443 443  [[image:image-20221108172432-7.png]]
444 444  
445 445  
446 -
447 447  ===== **3. Open the Serial Monitor to check the LA66 Shield data** =====
448 448  
449 -
450 450  The UNO will now reads the temperature and humidity data from the sensor and broadcast it via LoRa wireless,
451 451  
452 452  [[image:image-20221108174840-8.png||height="731" width="671"]]
453 453  
454 454  
455 -
456 456  Sending out data as below.
457 457  
458 458  [[image:image-20221108175113-9.png||height="556" width="998"]]
459 459  
460 460  
369 +
461 461  === 5.2.3 Set Up LG01v2 ===
462 462  
463 463  
... ... @@ -479,13 +479,12 @@
479 479  AT+IQ=0,0  ~-~--> TX and RX InvertIQ
480 480  AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
481 481  AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
482 -AT+RXMOD=65535,2  ~-~-->  Rx Timeout and Reply mode, RX window always open**(0:No ACK, 1:Reply mode, 2:Send an ACK once got a message from another device. ACK Content is 0x00 FF )**
391 +AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode, RX window always open
483 483  )))
484 484  
485 485  
486 486  === 5.2.4 Test result ===
487 487  
488 -
489 489  After the above configuration is complete, users can send test simulation data to check whether the configuration is correct, In LA66 sheild serial console send:(% style="color:red" %)**(AT+SEND=1,hello world,2,3).**
490 490  )))
491 491  
... ... @@ -494,18 +494,17 @@
494 494  [[image:image-20221108164413-2.png]]
495 495  
496 496  
497 -
498 498  In the real-time log of LG01v2：
499 499  
500 500  [[image:image-20221108170314-3.png]]
501 501  
502 502  
503 -=== 5.2.5 Plot data chart in LG01v2 ===
410 +=== **5.2.5 Plot data chart in LG01v2** ===
504 504  
505 505  
506 506  User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
507 507  
508 -User can import this example in Node-Red: [[attach:Log-Temperature-Sensor-and-send-data-to-Node-red.json||target="_blank"]]
415 +User can import this example in Node-Red: [[attach:Log-Temperature-Sensor-and-send-data-to-node-red.json||target="_blank"]]
509 509  
510 510  [[image:image-20221108180334-10.png||height="651" width="1141"]]
511 511  
... ... @@ -517,13 +517,13 @@
517 517  [[image:image-20221108180458-11.png||height="402" width="1137"]]
518 518  
519 519  
520 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)6. How users can access LG01(%%)v(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%) =
427 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**v(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
521 521  
522 522  
523 -(% style="color:blue" %)**USB TTL to LG01v2  Connection:**
430 +(% style="color:blue" %)**USB TTL to LG01-V2  Connection:**
524 524  
525 525  
526 -Port 1 of the UART on the LG01v2 is GND
433 +Port 1 of the UART on the LG01-V2 is GND
527 527  
528 528  (% class="box infomessage" %)
529 529  (((
... ... @@ -535,7 +535,7 @@
535 535  )))
536 536  
537 537  
538 -**LG01v2 UART connection photo**
445 +**LG01-V2 UART connection photo**
539 539  
540 540  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
541 541  
... ... @@ -546,29 +546,23 @@
546 546  
547 547  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
548 548  
549 -
550 550  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
551 551  
552 552  
553 -= 7. OTA System Update =
459 += **7. FAQ** =
554 554  
555 555  
556 -LG01v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
462 +== **7.1 How does LG01-V2 communicate with Lora shield (LoRa.h)** ==
557 557  
558 558  
559 -= 8. FAQ =
465 +This example describes how to use LG01-V2, LoRa Shield to set up a LoRa network,
560 560  
561 -== 8.1 How does LG01v2 communicate with Lora shield (LoRa.h) ==
562 -
563 -
564 -This example describes how to use LG01v2, LoRa Shield to set up a LoRa network,
565 -
566 566  [[image:image-20221103152238-8.png||height="251" width="654"]]
567 567  
568 568  
569 -(% style="color:red" %)**Prerequisites: The configurations of LG01v2 and Lora shield must match**
470 +(% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
570 570  
571 -**LG01v2 configuration:**
472 +**LG01-V2 configuration:**
572 572  
573 573  (% class="box infomessage" %)
574 574  (((
... ... @@ -586,8 +586,6 @@
586 586  AT+RXDAFORM=1    
587 587  )))
588 588  
589 -
590 -
591 591  **Lora shield configuration:**
592 592  
593 593  Lora Shield example: [[attach:LoRa_Shield_Sketch_For_MQTT.ino||target="_blank"]] , [[attach:arduino-LoRa-master.zip||target="_blank"]]
... ... @@ -595,30 +595,27 @@
595 595  [[image:image-20221101161318-2.png]]
596 596  
597 597  
497 +**Test LG01-V2 to receive Lora Shield data:**
598 598  
599 -**Test LG01v2 to receive Lora Shield data:**
600 -
601 601  [[image:image-20221101161951-3.png]]
602 602  
603 603  
502 +**Test the LG01-V2 to send data:**
604 604  
605 -**Test the LG01v2 to send data:**
606 -
607 607  [[image:image-20221101162527-4.png]]
608 608  
609 609  
610 -== 8.2 How does LG01v2 communicate with Heltec LoRa Node ==
507 +== **7.2 How does LG01-V2 communicate with Heltec LoRa Node** ==
611 611  
612 612  
613 -This example describes how to use LG01v2 and Heltec LoRa Node to set up a LoRa network,
510 +This example describes how to use LG01-V2 and Heltec LoRa Node to set up a LoRa network,
614 614  
615 615  [[image:image-20221112161111-2.png||height="258" width="692"]]
616 616  
617 -(% style="color:red" %)**Prerequisites: The configurations of LG01v2 and Lora shield must match**
514 +(% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
618 618  
516 +**LG01-V2 configuration:**
619 619  
620 -**LG01v2 configuration:**
621 -
622 622  (% class="box infomessage" %)
623 623  (((
624 624  AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
... ... @@ -635,7 +635,6 @@
635 635  AT+RXDAFORM=1  ~-~--> RX data format**（0: Hex ,1: String）**
636 636  )))
637 637  
638 -
639 639  After we upload the sketch to Heltec LoRa Node, we can see below output from Arduino.
640 640  
641 641  Lora Shield example: [[attach:LoRa_send_trial.ino||target="_blank"]]
... ... @@ -647,131 +647,55 @@
647 647  
648 648  [[image:image-20221112163119-4.png||height="808" width="560"]]
649 649  
545 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
650 650  
651 -== 8.3 How does LG01v2 communicate with LoRaWAN node ==
652 652  
653 -
654 -This example describes how to use LG01v2 and LSN50 to set up a  network,
655 -
656 -In this case, users need to set LSN50 to work in ABP mode and transmit in only one frequency.
657 -
658 -Assume we have a LG01v2 working in the frequency 868100000 now, below is the steps.
659 -
660 -
661 -**Step1: **Configure the LG01v2
662 -
663 -(% class="box infomessage" %)
664 664  (((
665 -AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
666 -AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
667 -AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
668 -AT+SYNCWORD=1  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
549 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
669 669  )))
670 670  
671 -**Step2:  **Run AT commands to make the LSN50 work in Single frequency and ABP mode. Below are the AT commands:
672 -
673 -(% class="box infomessage" %)
674 674  (((
675 -AT+FDR  ~-~--> Reset Parameters to Factory Default, Keys Reserve
676 -AT+NJM=0  ~-~-->  Set to ABP mode
677 -AT+ADR=0  ~-~-->  Set the Adaptive Data Rate Off
678 -AT+DR=0  ~-~--> Set Data Rate (Set AT+DR=3 for 915 band)
679 -AT+TDC=300000  ~-~-->  Set transmit interval to 5 minutes
680 -AT+CHS=868100000  ~-~--> Set transmit frequency to 868.1Mhz
681 -AT+DADDR=FFFFF111  ~-~--> Set Device Address to 26 01 1A F1
682 -ATZ  ~-~--> Reset MCU
683 -)))
553 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
684 684  
685 -**Step3:  **Check result
686 686  
687 687  
557 += **9. Reference** =
688 688  
689 -User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
690 690  
691 -User can import this example in Node-Red: [[attach:LG01v2_LSN50v2_S31.json||target="_blank"]]
560 +* Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
561 +* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
692 692  
693 -
694 -First the user needs to fill in the NwkSkey and AppSkey in the LoraWan Packet Decrypter node.
695 -
696 -[[image:image-20230620103535-2.png||height="591" width="1138"]]
697 -
698 -[[image:image-20230620103153-1.png||height="610" width="1141"]]
699 -
700 -
701 -The data will be displayed in the built-in node-red UI
702 -
703 -**Browser input: (% style="background-color:yellow" %)__//http:~/~/<local-IPV4-address>//__(%%)**
704 -
705 -[[image:image-20230620103923-3.png||height="476" width="1138"]]
706 -
707 -= 9. Trouble Shooting =
708 -
709 -== 9.1  Fallback IP does not work, how can users check ==
710 -
711 -
712 -When the computer has completed the above fallback IP configuration,the LG01v2 Web UI is still not accessible via fallback IP.
713 -
714 -
715 -**1.Check whether the configuration is correct**
716 -
717 -Run the CMD command to ipconfig and ping 172.31.255.254.
718 -
719 -If this fails, the user needs to reconfigure.
720 -
721 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413170224-3.png?width=707&height=433&rev=1.1||alt="image-20230413170224-3.png"]]
722 -
723 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413170246-4.png?rev=1.1||alt="image-20230413170246-4.png"]]
724 -
725 -
726 -**2. Check whether the firewall is disabled**
727 -
728 -If the firewall is not down, this will affect access to the gateway.
729 -
730 -
731 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
732 -
733 -
734 -(((
735 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
736 -)))
737 -
738 -(((
739 -With your question as detailed as possible. We will reply and help you in the shortest.
740 -
741 -
742 -= 11. Reference =
743 -
744 -
745 -* Install Tago Core: Refer **Install Tago Core in LG01v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
746 -
747 -* [[Advance OS Reference Guide for L>>doc:Main.Armbian OS instruction.WebHome]]G01v2.
748 -
749 749  
750 750  )))
751 751  
752 -= 12. Order Info =
566 += **10. Order Info** =
753 753  
754 754  
755 -(% style="color:#0000ff" %)**LG01v2-XXX-YYY**
569 +(% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
756 756  
757 757  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
758 758  
759 -* (% style="color:red" %)**868**(%%): For frequency : 863 ~~ 870Mhz
760 -* (% style="color:red" %)**915**(%%): For frequency : 902 ~~ 928Mhz
573 +* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
574 +* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
575 +* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
576 +* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
577 +* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
578 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
761 761  
762 762  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
763 763  
764 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
765 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America: Verizon, AT&T(FirstNet), U.S.Cellular; Canada: Telus
766 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
767 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
582 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
583 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
584 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
585 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
768 768  
769 769  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
770 770  
771 771  
772 -= 13. Manufacturer Info =
773 773  
591 += **10. Manufacturer Info** =
774 774  
593 +
775 775  **Shenzhen Dragino Technology Development co. LTD**
776 776  
777 777  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -779,9 +779,10 @@
779 779  LongCheng Street, LongGang District ; Shenzhen 518116,China
780 780  
781 781  
782 -= 14. FCC Warning =
783 783  
602 += **11. FCC Warning** =
784 784  
604 +
785 785  (((
786 786  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
787 787  )))
... ... @@ -811,6 +811,7 @@
811 811  (((
812 812  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
813 813  
814 -
815 815  
816 816  )))
636 +
637 +~)~)~)
LG01v2_LSN50v2_S31.json
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -16.5 KB
Content
... ... @@ -1,587 +1,0 @@
1 -[
2 - {
3 - "id": "5e07f5eeeb2a969b",
4 - "type": "tab",
5 - "label": "流程 1",
6 - "disabled": false,
7 - "info": "",
8 - "env": []
9 - },
10 - {
11 - "id": "9c26fa2f19e2b556",
12 - "type": "function",
13 - "z": "5e07f5eeeb2a969b",
14 - "name": "hex to base64",
15 - "func": "var input = msg.payload;\nvar base64 = Buffer.from(input, 'hex').toString('base64');\nmsg.payload = base64;\nreturn msg;",
16 - "outputs": 1,
17 - "noerr": 0,
18 - "initialize": "",
19 - "finalize": "",
20 - "libs": [],
21 - "x": 220,
22 - "y": 160,
23 - "wires": [
24 - [
25 - "075bc9172a4c6570",
26 - "3601a98894805fbe"
27 - ]
28 - ]
29 - },
30 - {
31 - "id": "ee0480c81e66d657",
32 - "type": "function",
33 - "z": "5e07f5eeeb2a969b",
34 - "name": "function 4",
35 - "func": "var bytes = msg.payload[\"uplink_message\"]\nvar data = msg.payload[\"out\"]\nvar mode = (parseInt(data.substring(12, 14), 16) & 0x7C) >> 2;\nif (mode != 2)\n{\nvar bat = (parseInt(data.substring(0,4),16)&0x3FFF)/1000;\nvar TempC1 = (parseFloat(parseInt(data.substring(4, 8),16)/10).toFixed(2));\nvar ADC_CH0V = (parseInt(data.substring(8, 12), 16) ) / 1000;\nvar Digital_IStatus = (parseInt((data.substring(8, 12),16) & 0x02))?\"H\":\"L\"; \n\nif (mode != 6) {\n\n var EXTI_Trigger = ((parseInt(data.substring(12, 14), 16) & 0x01))? \"TRUE\" : \"FALSE\";\n\n var Door_status = ((parseInt(data.substring(12, 14), 16) & 0x80))? \"CLOSE\" : \"OPEN\";\n\n}\n}\nif (mode == 0) {\n\n var Work_mode = \"IIC\";\n\n if ((parseInt(data.substring(18, 22), 16)) == 0){\n\n var Illum = (parseInt(data.substring(8, 12), 16));\n\n }\n\n else {\n\n var TempC_SHT = parseFloat(((parseInt(data.substring(14, 18), 16)) / 10).toFixed(2));\n\n var Hum_SHT = parseFloat((((parseInt(data.substring(18, 22), 16))) / 10).toFixed(1));\n\n }\n \n}\n\nelse if (mode == 1) {\n\n var Work_mode = \" Distance\";\n\n var Distance_cm = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(1));\n\n if (((parseInt(data.substring(18, 22), 16))) != 65535){\n\n var Distance_signal_strength = parseFloat(((parseInt(data.substring(18, 22), 16))).toFixed(0));\n\n }\n\n}\n\nelse if (mode == 2) {\n\n var Work_mode = \" 3ADC\";\n\n var BatV = (parseInt(data.substring(18, 22), 16)) / 10;\n\n var ADC_CH0V = ((parseInt(data.substring(0, 4), 16))) / 1000;\n\n var ADC_CH1V = ((parseInt(data.substring(4, 8), 16))) / 1000;\n\n var ADC_CH4V = ((parseInt(data.substring(8, 12), 16))) / 1000;\n\n var Digital_IStatus = ((parseInt(data.substring(12, 14), 16)) & 0x02) ? \"H\" : \"L\";\n\n var EXTI_Trigger = ((parseInt(data.substring(12, 14), 16)) & 0x01) ? \"TRUE\" : \"FALSE\";\n\n var Door_status = ((parseInt(data.substring(13, 14), 16)) & 0x80) ? \"CLOSE\" : \"OPEN\";\n\n if ((parseInt(data.substring(18, 22), 16) === 0)) {\n\n var Illum = ((parseInt(data.substring(14, 18), 16)));\n\n }\n\n else {\n\n var TempC_SHT = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(2));\n\n var Hum_SHT = parseFloat((((parseInt(data.substring(18, 24), 16))) / 10).toFixed(1));\n\n }\n\n}\n\nelse if (mode == 3) {\n\n var Work_mode = \"3DS18B20\";\n\n var TempC2 = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(2));\n\n var TempC3 = parseFloat((((parseInt(data.substring(18, 24), 16))) / 10).toFixed(1));\n\n\n\n}\n\nelse if (mode == 4) {\n\n var Work_mode = \"Weight\";\n\n var Weight = ((parseInt(data.substring(14, 18), 16)));\n\n}\n\nelse if (mode == 5) {\n\n var Work_mode = \"Count\";\n\n var Count = ((parseInt(data.substring(14, 22), 16)));\n\n}\n\n\n\nvar b = { payload: bat }, c = { payload: TempC1 }, d = { payload: ADC_CH0V }, e = { payload: Digital_IStatus }, f = { payload: EXTI_Trigger }, g = { payload: Door_status }, j = { payload: TempC_SHT }, s = { payload: Hum_SHT }, k = { payload: Work_mode };\nreturn [b,c,d,e,f,g,j,k,s];",
36 - "outputs": 9,
37 - "noerr": 0,
38 - "initialize": "",
39 - "finalize": "",
40 - "libs": [],
41 - "x": 660,
42 - "y": 300,
43 - "wires": [
44 - [
45 - "fd22b92d2b8de0fb"
46 - ],
47 - [
48 - "3307256a4e1ea53a"
49 - ],
50 - [
51 - "a3fd8302ec399e31"
52 - ],
53 - [
54 - "c7d1f63ff5f0026a"
55 - ],
56 - [
57 - "159967056da52706"
58 - ],
59 - [
60 - "a21581a41adc1714"
61 - ],
62 - [
63 - "7bb78b78445ac9e3"
64 - ],
65 - [
66 - "0364752170ed6228"
67 - ],
68 - [
69 - "65293155d71d54b9"
70 - ]
71 - ]
72 - },
73 - {
74 - "id": "e763b293d42dbdd5",
75 - "type": "change",
76 - "z": "5e07f5eeeb2a969b",
77 - "name": "",
78 - "rules": [
79 - {
80 - "t": "change",
81 - "p": "payload",
82 - "pt": "msg",
83 - "from": "Data: (HEX:)",
84 - "fromt": "str",
85 - "to": "",
86 - "tot": "str"
87 - },
88 - {
89 - "t": "change",
90 - "p": "payload",
91 - "pt": "msg",
92 - "from": " ",
93 - "fromt": "str",
94 - "to": "",
95 - "tot": "str"
96 - }
97 - ],
98 - "action": "",
99 - "property": "",
100 - "from": "",
101 - "to": "",
102 - "reg": false,
103 - "x": 420,
104 - "y": 60,
105 - "wires": [
106 - [
107 - "9c26fa2f19e2b556",
108 - "416a930e89291528"
109 - ]
110 - ]
111 - },
112 - {
113 - "id": "075bc9172a4c6570",
114 - "type": "lorawan-packet-decrypt-nwkey-appkey",
115 - "z": "5e07f5eeeb2a969b",
116 - "name": "FFFFF111",
117 - "nsw": "CCFFFFFFFFFFFFFFFFFFFFFFFFFFFFAA",
118 - "asw": "FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCC",
119 - "x": 510,
120 - "y": 160,
121 - "wires": [
122 - [
123 - "ee0480c81e66d657"
124 - ]
125 - ]
126 - },
127 - {
128 - "id": "13dc77a4e2bb4f72",
129 - "type": "serial in",
130 - "z": "5e07f5eeeb2a969b",
131 - "name": "",
132 - "serial": "bb1c0e81fd51fa9e",
133 - "x": 190,
134 - "y": 60,
135 - "wires": [
136 - [
137 - "e763b293d42dbdd5"
138 - ]
139 - ]
140 - },
141 - {
142 - "id": "3307256a4e1ea53a",
143 - "type": "ui_chart",
144 - "z": "5e07f5eeeb2a969b",
145 - "name": "",
146 - "group": "c1fddd37879528e5",
147 - "order": 1,
148 - "width": 0,
149 - "height": 0,
150 - "label": "TempC1",
151 - "chartType": "line",
152 - "legend": "false",
153 - "xformat": "HH:mm:ss",
154 - "interpolate": "linear",
155 - "nodata": "",
156 - "dot": false,
157 - "ymin": "",
158 - "ymax": "",
159 - "removeOlder": 1,
160 - "removeOlderPoints": "",
161 - "removeOlderUnit": "3600",
162 - "cutout": 0,
163 - "useOneColor": false,
164 - "useUTC": false,
165 - "colors": [
166 - "#1f77b4",
167 - "#aec7e8",
168 - "#ff7f0e",
169 - "#2ca02c",
170 - "#98df8a",
171 - "#d62728",
172 - "#ff9896",
173 - "#9467bd",
174 - "#c5b0d5"
175 - ],
176 - "outputs": 1,
177 - "useDifferentColor": false,
178 - "className": "",
179 - "x": 940,
180 - "y": 160,
181 - "wires": [
182 - []
183 - ]
184 - },
185 - {
186 - "id": "a3fd8302ec399e31",
187 - "type": "ui_chart",
188 - "z": "5e07f5eeeb2a969b",
189 - "name": "",
190 - "group": "6d46fdae9f413f7b",
191 - "order": 1,
192 - "width": 0,
193 - "height": 0,
194 - "label": "ADC_CH0V",
195 - "chartType": "line",
196 - "legend": "false",
197 - "xformat": "HH:mm:ss",
198 - "interpolate": "linear",
199 - "nodata": "",
200 - "dot": false,
201 - "ymin": "",
202 - "ymax": "",
203 - "removeOlder": 1,
204 - "removeOlderPoints": "",
205 - "removeOlderUnit": "3600",
206 - "cutout": 0,
207 - "useOneColor": false,
208 - "useUTC": false,
209 - "colors": [
210 - "#1f77b4",
211 - "#aec7e8",
212 - "#ff7f0e",
213 - "#2ca02c",
214 - "#98df8a",
215 - "#d62728",
216 - "#ff9896",
217 - "#9467bd",
218 - "#c5b0d5"
219 - ],
220 - "outputs": 1,
221 - "useDifferentColor": false,
222 - "className": "",
223 - "x": 950,
224 - "y": 200,
225 - "wires": [
226 - []
227 - ]
228 - },
229 - {
230 - "id": "fd22b92d2b8de0fb",
231 - "type": "ui_chart",
232 - "z": "5e07f5eeeb2a969b",
233 - "name": "",
234 - "group": "bb5657c2a8c290a3",
235 - "order": 1,
236 - "width": 0,
237 - "height": 0,
238 - "label": "BatV",
239 - "chartType": "line",
240 - "legend": "false",
241 - "xformat": "HH:mm:ss",
242 - "interpolate": "linear",
243 - "nodata": "",
244 - "dot": false,
245 - "ymin": "",
246 - "ymax": "",
247 - "removeOlder": 1,
248 - "removeOlderPoints": "",
249 - "removeOlderUnit": "3600",
250 - "cutout": 0,
251 - "useOneColor": false,
252 - "useUTC": false,
253 - "colors": [
254 - "#1f77b4",
255 - "#aec7e8",
256 - "#ff7f0e",
257 - "#2ca02c",
258 - "#98df8a",
259 - "#d62728",
260 - "#ff9896",
261 - "#9467bd",
262 - "#c5b0d5"
263 - ],
264 - "outputs": 1,
265 - "useDifferentColor": false,
266 - "className": "",
267 - "x": 930,
268 - "y": 120,
269 - "wires": [
270 - []
271 - ]
272 - },
273 - {
274 - "id": "c7d1f63ff5f0026a",
275 - "type": "ui_text",
276 - "z": "5e07f5eeeb2a969b",
277 - "group": "528e965cef294158",
278 - "order": 0,
279 - "width": "6",
280 - "height": "4",
281 - "name": "",
282 - "label": "Digital_IStatus",
283 - "format": "{{msg.payload}}",
284 - "layout": "col-center",
285 - "className": "",
286 - "x": 960,
287 - "y": 240,
288 - "wires": []
289 - },
290 - {
291 - "id": "159967056da52706",
292 - "type": "ui_text",
293 - "z": "5e07f5eeeb2a969b",
294 - "group": "5e615e3edb5999a0",
295 - "order": 0,
296 - "width": "6",
297 - "height": "4",
298 - "name": "",
299 - "label": "EXTI_Trigger",
300 - "format": "{{msg.payload}}",
301 - "layout": "col-center",
302 - "className": "",
303 - "x": 950,
304 - "y": 280,
305 - "wires": []
306 - },
307 - {
308 - "id": "7bb78b78445ac9e3",
309 - "type": "ui_chart",
310 - "z": "5e07f5eeeb2a969b",
311 - "name": "",
312 - "group": "5f7fec85295a7f7c",
313 - "order": 0,
314 - "width": 0,
315 - "height": 0,
316 - "label": "TempC_SHT",
317 - "chartType": "line",
318 - "legend": "false",
319 - "xformat": "HH:mm:ss",
320 - "interpolate": "linear",
321 - "nodata": "",
322 - "dot": false,
323 - "ymin": "",
324 - "ymax": "",
325 - "removeOlder": 1,
326 - "removeOlderPoints": "",
327 - "removeOlderUnit": "3600",
328 - "cutout": 0,
329 - "useOneColor": false,
330 - "useUTC": false,
331 - "colors": [
332 - "#1f77b4",
333 - "#aec7e8",
334 - "#ff7f0e",
335 - "#2ca02c",
336 - "#98df8a",
337 - "#d62728",
338 - "#ff9896",
339 - "#9467bd",
340 - "#c5b0d5"
341 - ],
342 - "outputs": 1,
343 - "useDifferentColor": false,
344 - "className": "",
345 - "x": 950,
346 - "y": 360,
347 - "wires": [
348 - []
349 - ]
350 - },
351 - {
352 - "id": "0364752170ed6228",
353 - "type": "ui_text",
354 - "z": "5e07f5eeeb2a969b",
355 - "group": "3cb616f18674c42a",
356 - "order": 0,
357 - "width": "6",
358 - "height": "4",
359 - "name": "",
360 - "label": "Work_mode",
361 - "format": "{{msg.payload}}",
362 - "layout": "col-center",
363 - "className": "",
364 - "x": 950,
365 - "y": 400,
366 - "wires": []
367 - },
368 - {
369 - "id": "65293155d71d54b9",
370 - "type": "ui_chart",
371 - "z": "5e07f5eeeb2a969b",
372 - "name": "",
373 - "group": "bb2e35e7a931c198",
374 - "order": 0,
375 - "width": 0,
376 - "height": 0,
377 - "label": "Hum_SHT",
378 - "chartType": "line",
379 - "legend": "false",
380 - "xformat": "HH:mm:ss",
381 - "interpolate": "linear",
382 - "nodata": "",
383 - "dot": false,
384 - "ymin": "",
385 - "ymax": "",
386 - "removeOlder": 1,
387 - "removeOlderPoints": "",
388 - "removeOlderUnit": "3600",
389 - "cutout": 0,
390 - "useOneColor": false,
391 - "useUTC": false,
392 - "colors": [
393 - "#1f77b4",
394 - "#aec7e8",
395 - "#ff7f0e",
396 - "#2ca02c",
397 - "#98df8a",
398 - "#d62728",
399 - "#ff9896",
400 - "#9467bd",
401 - "#c5b0d5"
402 - ],
403 - "outputs": 1,
404 - "useDifferentColor": false,
405 - "className": "",
406 - "x": 950,
407 - "y": 440,
408 - "wires": [
409 - []
410 - ]
411 - },
412 - {
413 - "id": "a21581a41adc1714",
414 - "type": "ui_text",
415 - "z": "5e07f5eeeb2a969b",
416 - "group": "9109ae41eee353df",
417 - "order": 0,
418 - "width": "6",
419 - "height": "4",
420 - "name": "",
421 - "label": "Door_status",
422 - "format": "{{msg.payload}}",
423 - "layout": "col-center",
424 - "className": "",
425 - "x": 950,
426 - "y": 320,
427 - "wires": []
428 - },
429 - {
430 - "id": "416a930e89291528",
431 - "type": "debug",
432 - "z": "5e07f5eeeb2a969b",
433 - "name": "debug 2",
434 - "active": true,
435 - "tosidebar": true,
436 - "console": false,
437 - "tostatus": false,
438 - "complete": "false",
439 - "statusVal": "",
440 - "statusType": "auto",
441 - "x": 660,
442 - "y": 60,
443 - "wires": []
444 - },
445 - {
446 - "id": "3601a98894805fbe",
447 - "type": "debug",
448 - "z": "5e07f5eeeb2a969b",
449 - "name": "debug 3",
450 - "active": true,
451 - "tosidebar": true,
452 - "console": false,
453 - "tostatus": false,
454 - "complete": "false",
455 - "statusVal": "",
456 - "statusType": "auto",
457 - "x": 380,
458 - "y": 240,
459 - "wires": []
460 - },
461 - {
462 - "id": "bb1c0e81fd51fa9e",
463 - "type": "serial-port",
464 - "serialport": "/dev/ttyUSB0",
465 - "serialbaud": "9600",
466 - "databits": "8",
467 - "parity": "none",
468 - "stopbits": "1",
469 - "waitfor": "",
470 - "dtr": "none",
471 - "rts": "none",
472 - "cts": "none",
473 - "dsr": "none",
474 - "newline": "\\n",
475 - "bin": "false",
476 - "out": "char",
477 - "addchar": "\\r\\n",
478 - "responsetimeout": "10000"
479 - },
480 - {
481 - "id": "c1fddd37879528e5",
482 - "type": "ui_group",
483 - "name": "BatV",
484 - "tab": "abb98f80600a5448",
485 - "order": 1,
486 - "disp": true,
487 - "width": "6",
488 - "collapse": false,
489 - "className": ""
490 - },
491 - {
492 - "id": "6d46fdae9f413f7b",
493 - "type": "ui_group",
494 - "name": "ADC_CH0V",
495 - "tab": "abb98f80600a5448",
496 - "order": 1,
497 - "disp": true,
498 - "width": "6",
499 - "collapse": false,
500 - "className": ""
501 - },
502 - {
503 - "id": "bb5657c2a8c290a3",
504 - "type": "ui_group",
505 - "name": "BatV",
506 - "tab": "abb98f80600a5448",
507 - "order": 3,
508 - "disp": true,
509 - "width": "6",
510 - "collapse": false,
511 - "className": ""
512 - },
513 - {
514 - "id": "528e965cef294158",
515 - "type": "ui_group",
516 - "name": "Digital_IStatus",
517 - "tab": "abb98f80600a5448",
518 - "order": 4,
519 - "disp": true,
520 - "width": "6",
521 - "collapse": false,
522 - "className": ""
523 - },
524 - {
525 - "id": "5e615e3edb5999a0",
526 - "type": "ui_group",
527 - "name": "EXTI_Trigger",
528 - "tab": "abb98f80600a5448",
529 - "order": 5,
530 - "disp": true,
531 - "width": "6",
532 - "collapse": false,
533 - "className": ""
534 - },
535 - {
536 - "id": "5f7fec85295a7f7c",
537 - "type": "ui_group",
538 - "name": "TempC_SHT",
539 - "tab": "abb98f80600a5448",
540 - "order": 6,
541 - "disp": true,
542 - "width": "6",
543 - "collapse": false,
544 - "className": ""
545 - },
546 - {
547 - "id": "3cb616f18674c42a",
548 - "type": "ui_group",
549 - "name": "Work_mode",
550 - "tab": "abb98f80600a5448",
551 - "order": 7,
552 - "disp": true,
553 - "width": "6",
554 - "collapse": false,
555 - "className": ""
556 - },
557 - {
558 - "id": "bb2e35e7a931c198",
559 - "type": "ui_group",
560 - "name": "Hum_SHT",
561 - "tab": "abb98f80600a5448",
562 - "order": 8,
563 - "disp": true,
564 - "width": "6",
565 - "collapse": false,
566 - "className": ""
567 - },
568 - {
569 - "id": "9109ae41eee353df",
570 - "type": "ui_group",
571 - "name": "Door_status",
572 - "tab": "abb98f80600a5448",
573 - "order": 9,
574 - "disp": true,
575 - "width": "6",
576 - "collapse": false,
577 - "className": ""
578 - },
579 - {
580 - "id": "abb98f80600a5448",
581 - "type": "ui_tab",
582 - "name": "LSN50v2 S31",
583 - "icon": "LSN50v2 S31",
584 - "disabled": false,
585 - "hidden": false
586 - }
587 -]
Log-Temperature-Sensor-and-send-data-to-Node-red.json
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.3 KB
Content
... ... @@ -1,443 +1,0 @@
1 -[
2 - {
3 - "id": "0a211e08511c4bdd",
4 - "type": "tab",
5 - "label": "serial USB",
6 - "disabled": false,
7 - "info": "",
8 - "env": []
9 - },
10 - {
11 - "id": "4a97eeb54bf57a6d",
12 - "type": "serial in",
13 - "z": "0a211e08511c4bdd",
14 - "name": "",
15 - "serial": "bb1c0e81fd51fa9e",
16 - "x": 210,
17 - "y": 60,
18 - "wires": [
19 - [
20 - "d2493fb9752dbcab",
21 - "d183c255973c979e"
22 - ]
23 - ]
24 - },
25 - {
26 - "id": "12f1eeb8049675c1",
27 - "type": "inject",
28 - "z": "0a211e08511c4bdd",
29 - "name": "AT+SEND=1,hello world,0,3",
30 - "props": [
31 - {
32 - "p": "payload"
33 - }
34 - ],
35 - "repeat": "",
36 - "crontab": "",
37 - "once": false,
38 - "onceDelay": 0.1,
39 - "topic": "",
40 - "payload": "AT+SEND=1,hello world,0,3",
41 - "payloadType": "str",
42 - "x": 220,
43 - "y": 260,
44 - "wires": [
45 - [
46 - "a5d2f5df63a2148e"
47 - ]
48 - ]
49 - },
50 - {
51 - "id": "a5d2f5df63a2148e",
52 - "type": "serial out",
53 - "z": "0a211e08511c4bdd",
54 - "name": "",
55 - "serial": "bb1c0e81fd51fa9e",
56 - "x": 540,
57 - "y": 260,
58 - "wires": []
59 - },
60 - {
61 - "id": "dc04c04a0bc0e5db",
62 - "type": "inject",
63 - "z": "0a211e08511c4bdd",
64 - "name": "",
65 - "props": [
66 - {
67 - "p": "payload"
68 - }
69 - ],
70 - "repeat": "",
71 - "crontab": "",
72 - "once": false,
73 - "onceDelay": 0.1,
74 - "topic": "",
75 - "payload": "ATZ",
76 - "payloadType": "str",
77 - "x": 290,
78 - "y": 320,
79 - "wires": [
80 - [
81 - "a5d2f5df63a2148e"
82 - ]
83 - ]
84 - },
85 - {
86 - "id": "3de96a220e28e8f0",
87 - "type": "inject",
88 - "z": "0a211e08511c4bdd",
89 - "name": "AT+FRE",
90 - "props": [
91 - {
92 - "p": "payload"
93 - }
94 - ],
95 - "repeat": "",
96 - "crontab": "",
97 - "once": false,
98 - "onceDelay": 0.1,
99 - "topic": "",
100 - "payload": "AT+FRE=868.100,868.100",
101 - "payloadType": "str",
102 - "x": 280,
103 - "y": 380,
104 - "wires": [
105 - [
106 - "a5d2f5df63a2148e"
107 - ]
108 - ]
109 - },
110 - {
111 - "id": "638725a47a1e4365",
112 - "type": "inject",
113 - "z": "0a211e08511c4bdd",
114 - "name": "AT+BW",
115 - "props": [
116 - {
117 - "p": "payload"
118 - }
119 - ],
120 - "repeat": "",
121 - "crontab": "",
122 - "once": false,
123 - "onceDelay": 0.1,
124 - "topic": "",
125 - "payload": "AT+BW=0,0",
126 - "payloadType": "str",
127 - "x": 290,
128 - "y": 440,
129 - "wires": [
130 - [
131 - "a5d2f5df63a2148e"
132 - ]
133 - ]
134 - },
135 - {
136 - "id": "85ba9868d1f3e82c",
137 - "type": "inject",
138 - "z": "0a211e08511c4bdd",
139 - "name": "AT+SF",
140 - "props": [
141 - {
142 - "p": "payload"
143 - }
144 - ],
145 - "repeat": "",
146 - "crontab": "",
147 - "once": false,
148 - "onceDelay": 0.1,
149 - "topic": "",
150 - "payload": "AT+SF=12,12",
151 - "payloadType": "str",
152 - "x": 290,
153 - "y": 500,
154 - "wires": [
155 - [
156 - "a5d2f5df63a2148e"
157 - ]
158 - ]
159 - },
160 - {
161 - "id": "144b2749013ffe57",
162 - "type": "inject",
163 - "z": "0a211e08511c4bdd",
164 - "name": "AT+RXMOD",
165 - "props": [
166 - {
167 - "p": "payload"
168 - }
169 - ],
170 - "repeat": "",
171 - "crontab": "",
172 - "once": false,
173 - "onceDelay": 0.1,
174 - "topic": "",
175 - "payload": "AT+RXMOD=65535,2",
176 - "payloadType": "str",
177 - "x": 270,
178 - "y": 560,
179 - "wires": [
180 - [
181 - "a5d2f5df63a2148e"
182 - ]
183 - ]
184 - },
185 - {
186 - "id": "bfb2e9df89dc5e2f",
187 - "type": "inject",
188 - "z": "0a211e08511c4bdd",
189 - "name": "AT+SYNCWORD",
190 - "props": [
191 - {
192 - "p": "payload"
193 - }
194 - ],
195 - "repeat": "",
196 - "crontab": "",
197 - "once": false,
198 - "onceDelay": 0.1,
199 - "topic": "",
200 - "payload": "AT+SYNCWORD=0",
201 - "payloadType": "str",
202 - "x": 260,
203 - "y": 620,
204 - "wires": [
205 - [
206 - "a5d2f5df63a2148e"
207 - ]
208 - ]
209 - },
210 - {
211 - "id": "d2493fb9752dbcab",
212 - "type": "function",
213 - "z": "0a211e08511c4bdd",
214 - "name": "function 1",
215 - "func": "var data = msg.payload\nif (data.substring(0, 4) == \"Data\") {\n if (data.substring(6, 12) == \"(HEX:)\") {\n var temp = data.substring(13, 15) + data.substring(16, 18)\n var hum = data.substring(19, 21) + data.substring(22, 24)\n var temp1 = parseInt(temp, 16) / 100\n var hum1 = parseInt(hum, 16) / 10\n var a1 = { payload: temp1 }, a2 = { payload: hum1 }\n }\n if (data.substring(6, 15) == \"(String:)\") {\n var temp = data.substring(20, 24)\n var hum = data.substring(29, 34)\n a1 = { payload: temp }, a2 = { payload: hum }\n }\n}\nif (data.substring(0, 4) == \"Rssi\") {\n var rssi = data.substring(6)\n var a3 = { payload: rssi }\n}\nreturn [a1, a2, a3];",
216 - "outputs": 3,
217 - "noerr": 0,
218 - "initialize": "",
219 - "finalize": "",
220 - "libs": [],
221 - "x": 420,
222 - "y": 60,
223 - "wires": [
224 - [
225 - "c17d94be4317ae6c"
226 - ],
227 - [
228 - "20c5b1c7f42fa6bb"
229 - ],
230 - [
231 - "39a8462f3d748eef"
232 - ]
233 - ]
234 - },
235 - {
236 - "id": "39a8462f3d748eef",
237 - "type": "ui_chart",
238 - "z": "0a211e08511c4bdd",
239 - "name": "",
240 - "group": "ef41b39771110fa5",
241 - "order": 1,
242 - "width": 0,
243 - "height": 0,
244 - "label": "RSSI",
245 - "chartType": "line",
246 - "legend": "false",
247 - "xformat": "dd HH:mm",
248 - "interpolate": "linear",
249 - "nodata": "",
250 - "dot": true,
251 - "ymin": "",
252 - "ymax": "",
253 - "removeOlder": 1,
254 - "removeOlderPoints": "",
255 - "removeOlderUnit": "3600",
256 - "cutout": 0,
257 - "useOneColor": false,
258 - "useUTC": false,
259 - "colors": [
260 - "#1f77b4",
261 - "#aec7e8",
262 - "#ff7f0e",
263 - "#2ca02c",
264 - "#98df8a",
265 - "#d62728",
266 - "#ff9896",
267 - "#9467bd",
268 - "#c5b0d5"
269 - ],
270 - "outputs": 1,
271 - "useDifferentColor": false,
272 - "className": "",
273 - "x": 670,
274 - "y": 180,
275 - "wires": [
276 - []
277 - ]
278 - },
279 - {
280 - "id": "c17d94be4317ae6c",
281 - "type": "ui_chart",
282 - "z": "0a211e08511c4bdd",
283 - "name": "",
284 - "group": "7e1d1c102cf74e6b",
285 - "order": 1,
286 - "width": 0,
287 - "height": 0,
288 - "label": "Temperature",
289 - "chartType": "line",
290 - "legend": "false",
291 - "xformat": "HH:mm:ss",
292 - "interpolate": "linear",
293 - "nodata": "",
294 - "dot": true,
295 - "ymin": "",
296 - "ymax": "",
297 - "removeOlder": 1,
298 - "removeOlderPoints": "",
299 - "removeOlderUnit": "3600",
300 - "cutout": 0,
301 - "useOneColor": false,
302 - "useUTC": false,
303 - "colors": [
304 - "#1f77b4",
305 - "#aec7e8",
306 - "#ff7f0e",
307 - "#2ca02c",
308 - "#98df8a",
309 - "#d62728",
310 - "#ff9896",
311 - "#9467bd",
312 - "#c5b0d5"
313 - ],
314 - "outputs": 1,
315 - "useDifferentColor": false,
316 - "className": "",
317 - "x": 690,
318 - "y": 100,
319 - "wires": [
320 - []
321 - ]
322 - },
323 - {
324 - "id": "20c5b1c7f42fa6bb",
325 - "type": "ui_chart",
326 - "z": "0a211e08511c4bdd",
327 - "name": "",
328 - "group": "3f5d139f158d7c1c",
329 - "order": 2,
330 - "width": 0,
331 - "height": 0,
332 - "label": "Humidity",
333 - "chartType": "line",
334 - "legend": "false",
335 - "xformat": "HH:mm:ss",
336 - "interpolate": "linear",
337 - "nodata": "",
338 - "dot": true,
339 - "ymin": "",
340 - "ymax": "",
341 - "removeOlder": 1,
342 - "removeOlderPoints": "",
343 - "removeOlderUnit": "3600",
344 - "cutout": 0,
345 - "useOneColor": false,
346 - "useUTC": false,
347 - "colors": [
348 - "#1f77b4",
349 - "#aec7e8",
350 - "#ff7f0e",
351 - "#2ca02c",
352 - "#98df8a",
353 - "#d62728",
354 - "#ff9896",
355 - "#9467bd",
356 - "#c5b0d5"
357 - ],
358 - "outputs": 1,
359 - "useDifferentColor": false,
360 - "className": "",
361 - "x": 680,
362 - "y": 140,
363 - "wires": [
364 - []
365 - ]
366 - },
367 - {
368 - "id": "d183c255973c979e",
369 - "type": "debug",
370 - "z": "0a211e08511c4bdd",
371 - "name": "debug 1",
372 - "active": true,
373 - "tosidebar": true,
374 - "console": false,
375 - "tostatus": false,
376 - "complete": "false",
377 - "statusVal": "",
378 - "statusType": "auto",
379 - "x": 420,
380 - "y": 180,
381 - "wires": []
382 - },
383 - {
384 - "id": "bb1c0e81fd51fa9e",
385 - "type": "serial-port",
386 - "serialport": "/dev/ttyUSB0",
387 - "serialbaud": "9600",
388 - "databits": "8",
389 - "parity": "none",
390 - "stopbits": "1",
391 - "waitfor": "",
392 - "dtr": "none",
393 - "rts": "none",
394 - "cts": "none",
395 - "dsr": "none",
396 - "newline": "\\n",
397 - "bin": "false",
398 - "out": "char",
399 - "addchar": "\\r\\n",
400 - "responsetimeout": "10000"
401 - },
402 - {
403 - "id": "ef41b39771110fa5",
404 - "type": "ui_group",
405 - "name": "rssi",
406 - "tab": "abb98f80600a5448",
407 - "order": 3,
408 - "disp": true,
409 - "width": "6",
410 - "collapse": false,
411 - "className": ""
412 - },
413 - {
414 - "id": "7e1d1c102cf74e6b",
415 - "type": "ui_group",
416 - "name": "TEM",
417 - "tab": "abb98f80600a5448",
418 - "order": 4,
419 - "disp": true,
420 - "width": "6",
421 - "collapse": false,
422 - "className": ""
423 - },
424 - {
425 - "id": "3f5d139f158d7c1c",
426 - "type": "ui_group",
427 - "name": "HUM",
428 - "tab": "abb98f80600a5448",
429 - "order": 2,
430 - "disp": true,
431 - "width": "6",
432 - "collapse": false,
433 - "className": ""
434 - },
435 - {
436 - "id": "abb98f80600a5448",
437 - "type": "ui_tab",
438 - "name": "LG01v2",
439 - "icon": "LG01v2",
440 - "disabled": false,
441 - "hidden": false
442 - }
443 -]
image-20230504095457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -412.6 KB
Content
image-20230504095502-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -412.6 KB
Content
image-20230504100722-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.5 KB
Content
image-20230506110646-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -383.1 KB
Content
image-20230506113332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20230506113432-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -36.5 KB
Content
image-20230506113531-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -403.2 KB
Content
image-20230506113602-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -26.7 KB
Content
image-20230506113623-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.4 KB
Content
image-20230506113705-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -40.9 KB
Content
image-20230506113722-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.2 KB
Content
image-20230506113737-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20230506113813-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -39.5 KB
Content
image-20230506113831-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -32.2 KB
Content
image-20230506114127-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.1 KB
Content
image-20230506115438-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -413.6 KB
Content
image-20230620103153-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -127.6 KB
Content
image-20230620103535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -156.3 KB
Content
image-20230620103923-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -72.7 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0