Last modified by Kilight Cao on 2024/10/12 08:58
<
From version < 134.2 >
edited by Xiaoling
on 2023/06/10 17:02
To version < 101.1 >
edited by Edwin Chen
on 2022/11/14 19:39
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -11,33 +11,26 @@
11 11  
12 12  {{toc/}}
13 13  
14 += **1. Introduction** =
14 14  
15 15  
17 +== **1.1 What is LG01-V2** ==
16 16  
17 17  
18 -
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LG01v2 ==
22 -
23 -
24 24  (((
25 25  (((
26 -The LG01v2 is an (% style="color:blue" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 -
28 -LG01v2 is specially design for (% style="color:blue" %)**peer to peer LoRa**(%%) protocol instead of LoRaWAN protocol. The LG01v2 use single channel LoRa module to minimize the deployment cost for a private p2p LoRa wireless network.
22 +The LG01-V2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
29 29  )))
30 30  
31 31  (((
32 -LG01v2 uses Open Source Linux system. User can modify the Linux part and develop customize software base on it. It has (% style="color:blue" %)**1.2Ghz Quad-Core CPU**(%%) , (% style="color:blue" %)**4GB eMMC storage**(%%) and (% style="color:blue" %)**512MB RAM**(%%) for most application.
33 -
34 -LG01v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
26 +LG01-V2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
35 35  )))
36 36  
37 37  
38 -== 1.2 Specifications ==
39 39  
31 +== **1.2 Specifications** ==
40 40  
33 +
41 41  (% style="color:#037691" %)**Hardware System:**
42 42  
43 43  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -55,77 +55,77 @@
55 55  * Storage Temperature: -20 ~~ 65°C
56 56  * Power Input: 5V, 2A, DC
57 57  
51 +== **1.3 Features** ==
58 58  
59 59  
60 -== 1.3 Features ==
61 -
62 -
63 63  * Open Source Debian system
64 64  * Managed by Web GUI, SSH via WAN or WiFi
65 65  * Remote Management
66 66  * Auto-provisioning for batch deployment and management
67 67  * LoRa Gateway
59 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
68 68  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
69 69  
62 +== **1.4 Block Diagram** ==
70 70  
71 71  
72 -== 1.4 Block Diagram ==
73 73  
66 +== **1.5 LED Indicators** ==
74 74  
75 75  
76 -== 1.5 LED Indicators ==
77 -
78 -
79 79  LG01-V2 has totally four LEDs, They are:
80 80  
81 81  
82 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
72 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
83 83  
84 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
74 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
85 85  
86 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
76 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
87 87  
88 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
78 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
89 89  
90 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
80 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
91 91  
92 - ✓** SOLID RED:** Device doesn't have an Internet connection.
82 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
93 93  
94 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
84 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
95 95  
96 96  
97 -== 1.6 Button Intruction ==
98 98  
88 +== **1.6 Button Intruction** ==
99 99  
90 +
100 100  LG01-V2 has a black toggle button, which is:
101 101  
102 102  
103 -(% style="color:blue" %)**➢ Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
94 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
104 104  
105 - **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
96 + // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
106 106  
107 107  
108 -(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
99 +(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
109 109  
110 - **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
101 + //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
111 111  
112 112  
113 -= 2. Quick Start =
114 114  
105 += **2. Quick Start** =
115 115  
107 +
116 116  The LG01-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
117 117  
118 118  In most cases, the first thing you need to do is make the LG01-v2 accessible to the network.
119 119  
120 120  
121 -== 2.1 Access and Configure LG01-v2 ==
113 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
122 122  
123 -=== 2.1.1 Find IP address of LG01-v2 ===
124 124  
116 +== **2.1.1 connect the network.** ==
125 125  
126 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
127 127  
119 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
128 128  
121 +
129 129  Connect the LG01-V2 Ethernet port to your router and LG01-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01-V2.
130 130  
131 131  You can also use this IP to connect.
... ... @@ -133,38 +133,10 @@
133 133  
134 134  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100129-1.png?width=1263&height=332&rev=1.1||alt="image-20220622100129-1.png"]]
135 135  
136 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via LG01v2 Fallback IP ====
137 137  
138 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230107084650-2.png?width=839&height=310&rev=1.1||alt="image-20230107084650-2.png" height="284" width="769"]]
130 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
139 139  
140 140  
141 -**Steps to connect via fallback IP:**
142 -
143 -~1. Connect the PC's Ethernet port to LG01v2's WAN port
144 -
145 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
146 -
147 -**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
148 -
149 -
150 -As in the below photo:
151 -
152 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413172038-1.png?width=1243&height=732&rev=1.1||alt="image-20230413172038-1.png" height="624" width="1059"]]
153 -
154 -
155 -Configure computer Ethernet port steps video: **[[fallback ip.mp4>>url:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/fallback%20ip.mp4?rev=1.1]]**
156 -
157 -If you still can't access the LG01v2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/LG01v2/#H10.1A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
158 -
159 -3. In the PC, use IP address 172.31.255.254 to access the LG01v2 via Web or Console.
160 -
161 -[[image:image-20230506115438-13.png||height="554" width="1047"]]
162 -
163 -
164 -
165 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ====
166 -
167 -
168 168  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100542-2.png?width=1256&height=369&rev=1.1||alt="image-20220622100542-2.png"]]
169 169  
170 170  
... ... @@ -171,111 +171,74 @@
171 171  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
172 172  
173 173  
174 -[[image:image-20230506113332-2.png]]
139 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102702-6.png?rev=1.1||alt="image-20220622102702-6.png"]]
175 175  
176 176  
177 177  **Wi-Fi configuration successful**
178 178  
179 179  
180 -[[image:image-20230506113432-3.png||height="397" width="855"]]
145 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102847-7.png?rev=1.1||alt="image-20220622102847-7.png"]]
181 181  
182 182  
183 -=== 2.1.2 Access Configure Web UI ===
184 184  
149 += **3. Web Configure Pages** =
185 185  
186 -**Web Interface**
151 +== **3.1 Home** ==
187 187  
188 -Open a browser on the PC and type the LG01v2 ip address (depends on your connect method)
153 +//Shows the system running status~://
189 189  
155 +[[image:image-20221104155612-1.png||height="497" width="942"]]
190 190  
191 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
192 192  
193 -You will see the login interface of LG01v2 as shown below.
158 +== **3.2 Network Settings** ==
194 194  
195 -The account details for Web Login are:
196 196  
197 -(% style="color:#4f81bd" %)**User Name: root**
161 +=== **3.2.1 Network ~-~-> WiFi** ===
198 198  
199 -(% style="color:#4f81bd" %)**Password:   dragino**
200 200  
201 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230106153501-1.png?width=894&height=367&rev=1.1||alt="image-20230106153501-1.png"]]
164 +[[image:image-20221104155654-2.png||height="319" width="813"]]
202 202  
203 203  
204 -= 3. Web Configure Pages =
205 205  
206 -== 3.1 Home ==
168 +=== **3.4.2 Network ~-~-> System Status** ===
207 207  
208 208  
209 -Shows the system running status:
171 +[[image:image-20221104155724-3.png||height="679" width="861"]]
210 210  
211 -[[image:image-20230506113531-4.png||height="430" width="818"]]
212 212  
213 213  
214 -== 3.2 Network Settings ==
175 +=== **3.4.3 Network ~-~-> Firewall** ===
215 215  
216 -=== 3.2.1 Network ~-~-> WiFi ===
217 217  
178 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616115351-6.png?width=661&height=244&rev=1.1||alt="image-20220616115351-6.png"]]
218 218  
219 -[[image:image-20230506113602-5.png]]
220 220  
221 221  
222 -=== 3.4.2 Network ~-~-> System Status ===
182 +== **3.5 System** ==
223 223  
224 224  
225 -[[image:image-20230506113623-6.png||height="511" width="672"]]
185 +=== **3.5.1  System ~-~-> System Overview** ===
226 226  
227 227  
228 -== 3.5 System ==
229 -
230 -=== 3.5.1  System ~-~-> System Overview ===
231 -
232 -
233 233  Shows the system info:
234 234  
235 -[[image:image-20230506113705-7.png]]
190 +[[image:image-20221104155907-4.png]]
236 236  
237 237  
238 -=== 3.5.2 System ~-~-> Backup/Restore ===
239 239  
194 +=== **3.5.2 System ~-~-> Backup/Restore** ===
240 240  
241 -[[image:image-20230506113722-8.png||height="254" width="797"]]
242 242  
197 +[[image:image-20221104155928-5.png||height="334" width="880"]]
243 243  
244 -=== 3.5.3 System ~-~-> System General ===
245 245  
200 += (% id="cke_bm_1978S" style="display:none" %)** **(%%)**4. Build in Server** =
246 246  
247 -In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
248 248  
249 -In addition, Users can customize the FallBack IP address.
250 -
251 -[[image:image-20230506113813-10.png||height="659" width="749"]]
252 -
253 -
254 -=== 3.5.4 System ~-~-> Remoteit ===
255 -
256 -
257 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
258 -
259 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
260 -
261 -[[image:image-20230506113831-11.png||height="567" width="748"]]
262 -
263 -
264 -=== 3.5.5 System ~-~-> Package Management ===
265 -
266 -
267 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
268 -
269 -[[image:image-20230506114127-12.png||height="803" width="762"]]
270 -
271 -
272 -= (% id="cke_bm_1978S" style="display:none" %) (%%)4. Build in Server =
273 -
274 -
275 275  The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
276 276  
277 277  
278 -[[image:image-20230506113737-9.png]]
206 +[[image:image-20221104155949-6.png||height="315" width="1023"]]
279 279  
280 280  
281 281  (% style="color:red" %)**Note:**
... ... @@ -283,16 +283,18 @@
283 283   **Path**: System ~-~-> Built-in Server
284 284  
285 285  
286 -(% style="color:blue" %)**Troubleshooting：**
214 +**Troubleshooting:**
287 287  
216 +
288 288  **~ 1. URL does not jump properly**
289 289  
290 290   For the Node-Red, you can use the local IP address and the port is 1880 to access it.
291 291  
292 292  
293 -== 4.1 Application Server ~-~- Node-Red ==
294 294  
223 +== **4.1 Application Server ~-~- Node-Red** ==
295 295  
225 +
296 296  You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
297 297  
298 298  
... ... @@ -302,24 +302,12 @@
302 302  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
303 303  
304 304  
305 -= 5. How to configure the Lora Gateway =
235 += **5. How to configure the Lora Gateway** =
306 306  
307 -== 5.1 Configure and Debug LoRa wireless of LG01v2 ==
308 308  
238 +== **5.1 Access the Lora configuration page** ==
309 309  
310 -First, the user needs to access the Linux console of LG01v2 via ssh
311 311  
312 -**IP address:  (% style="color:blue" %)IP address of LG01v2(%%)**
313 -
314 -**Port:  (% style="color:blue" %)22(%%)**
315 -
316 -**User Name:   (% style="color:blue" %)root(%%)**
317 -
318 -**Password:  (% style="color:blue" %)dragino(default)(%%)**
319 -
320 -[[image:image-20230504100722-3.png||height="228" width="908"]]
321 -
322 -
323 323  Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**:
324 324  
325 325  (% class="box infomessage" %)
... ... @@ -340,9 +340,7 @@
340 340  )))
341 341  
342 342  
343 -(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**
344 -
345 -
261 +(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**(%%)
346 346  (% style="color:red" %)[[image:image-20221029174703-3.png]]
347 347  
348 348  
... ... @@ -351,27 +351,26 @@
351 351  
352 352  (% class="box infomessage" %)
353 353  (((
354 -**AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
355 -AT+GROUPMOD=0,0  ~-~-->  TX and RX group
356 -AT+BW=0,0  ~-~-->  TX and RX Bandwidth
357 -AT+SF=12,12  ~-~-->  TX and RX Spreading Factor
358 -AT+POWER=14  ~-~-->  TX Power Range
359 -AT+CRC=1,1  ~-~-->  TX and RX CRC Type
360 -AT+HEADER=0,0  ~-~-->  TX and RX Header Type
361 -AT+CR=1,1  ~-~-->  TX and RX Coding Rate
362 -AT+IQ=0,0  ~-~-->  TX and RX InvertIQ
363 -AT+PREAMBLE=8,8  ~-~-->  TX and RX Preamble Length
364 -AT+SYNCWORD=0  ~-~-->  Syncword(0: private，1: public)
365 -AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
366 -AT+RXDAFORM=1**                              
270 +AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
271 +AT+GROUPMOD=0,0  ~-~--> TX and RX group
272 +AT+BW=0,0  ~-~--> TX and RX Bandwidth
273 +AT+SF=12,12  ~-~--> TX and RX Spreading Factor
274 +AT+POWER=14  ~-~--> TX Power Range
275 +AT+CRC=1,1  ~-~--> TX and RX CRC Type
276 +AT+HEADER=0,0  ~-~--> TX and RX Header Type
277 +AT+CR=1,1  ~-~--> TX and RX Coding Rate
278 +AT+IQ=0,0  ~-~--> TX and RX InvertIQ
279 +AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length
280 +AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
281 +AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
282 +AT+RXDAFORM=1                              
367 367  )))
368 368  
369 369  
370 -== 5.2 Example: LG01v2 ==
286 +== **5.2 Example: LG01v2** ==
371 371  
372 -=== 5.2.1 Introduce for the example: ===
288 +=== **5.2.1 Introduce for the example:** ===
373 373  
374 -
375 375  [[image:image-20221104102736-3.png||height="282" width="723"]]
376 376  
377 377  
... ... @@ -381,13 +381,11 @@
381 381  * **LG01v2** : LG01v2 is set to listening the LoRa Channel which LA66 is broadcasting. When LG01v2 get the data from LA66, LG01v2 will plot the data in built-in IoT server.
382 382  
383 383  
384 -
385 385  === 5.2.2 Set Up LA66 Shield + UNO ===
386 386  
387 387  
388 388  ==== **Set up LA66 Module** ====
389 389  
390 -
391 391  LA66 Module is loaded with the firmware **[[LA66 Peer-to-Peer firmware>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]] **and user can use AT Command to set up LA66 with below parameters:
392 392  
393 393  (((
... ... @@ -412,13 +412,10 @@
412 412  )))
413 413  
414 414  
415 -
416 416  ==== **Set up Arduino UNO** ====
417 417  
418 -(% id="cke_bm_1033249S" style="display:none" %)** **
330 +(% id="cke_bm_1033249S" style="display:none" %)** **(%%)**Hardware Connection**
419 419  
420 -**Hardware Connection**
421 -
422 422  (% class="box infomessage" %)
423 423  (((
424 424  **The DHT11 sensor connects to the LA66 Shield:**
... ... @@ -431,17 +431,13 @@
431 431  [[image:image-20221108170731-5.png||height="588" width="441"]]
432 432  
433 433  
434 -
435 435  ===== **1. Open Arduino IDE** =====
436 436  
437 -
438 438  [[image:image-20221108172149-6.png||height="650" width="542"]]
439 439  
440 440  
441 -
442 442  ===== **2. Open project** =====
443 443  
444 -
445 445  Users can download Arduino files from this link: [[attach:Log-Temperature-Sensor-and-send-data-to-Node-red.ino||target="_blank"]]
446 446  
447 447  Then click Compile and Upload to LA66 Shield,
... ... @@ -449,21 +449,19 @@
449 449  [[image:image-20221108172432-7.png]]
450 450  
451 451  
452 -
453 453  ===== **3. Open the Serial Monitor to check the LA66 Shield data** =====
454 454  
455 -
456 456  The UNO will now reads the temperature and humidity data from the sensor and broadcast it via LoRa wireless,
457 457  
458 458  [[image:image-20221108174840-8.png||height="731" width="671"]]
459 459  
460 460  
461 -
462 462  Sending out data as below.
463 463  
464 464  [[image:image-20221108175113-9.png||height="556" width="998"]]
465 465  
466 466  
370 +
467 467  === 5.2.3 Set Up LG01v2 ===
468 468  
469 469  
... ... @@ -485,13 +485,12 @@
485 485  AT+IQ=0,0  ~-~--> TX and RX InvertIQ
486 486  AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
487 487  AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
488 -AT+RXMOD=65535,2  ~-~-->  Rx Timeout and Reply mode, RX window always open**(0:No ACK, 1:Reply mode, 2:Send an ACK once got a message from another device. ACK Content is 0x00 FF )**
392 +AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode, RX window always open
489 489  )))
490 490  
491 491  
492 492  === 5.2.4 Test result ===
493 493  
494 -
495 495  After the above configuration is complete, users can send test simulation data to check whether the configuration is correct, In LA66 sheild serial console send:(% style="color:red" %)**(AT+SEND=1,hello world,2,3).**
496 496  )))
497 497  
... ... @@ -500,18 +500,17 @@
500 500  [[image:image-20221108164413-2.png]]
501 501  
502 502  
503 -
504 504  In the real-time log of LG01v2：
505 505  
506 506  [[image:image-20221108170314-3.png]]
507 507  
508 508  
509 -=== 5.2.5 Plot data chart in LG01v2 ===
411 +=== **5.2.5 Plot data chart in LG01v2** ===
510 510  
511 511  
512 512  User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
513 513  
514 -User can import this example in Node-Red: [[attach:Log-Temperature-Sensor-and-send-data-to-Node-red.json||target="_blank"]]
416 +User can import this example in Node-Red: [[attach:Log-Temperature-Sensor-and-send-data-to-node-red.json||target="_blank"]]
515 515  
516 516  [[image:image-20221108180334-10.png||height="651" width="1141"]]
517 517  
... ... @@ -523,13 +523,13 @@
523 523  [[image:image-20221108180458-11.png||height="402" width="1137"]]
524 524  
525 525  
526 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)6. How users can access LG01(%%)v(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%) =
428 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**v(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
527 527  
528 528  
529 -(% style="color:blue" %)**USB TTL to LG01v2  Connection:**
431 +(% style="color:blue" %)**USB TTL to LG01-V2  Connection:**
530 530  
531 531  
532 -Port 1 of the UART on the LG01v2 is GND
434 +Port 1 of the UART on the LG01-V2 is GND
533 533  
534 534  (% class="box infomessage" %)
535 535  (((
... ... @@ -541,7 +541,7 @@
541 541  )))
542 542  
543 543  
544 -**LG01v2 UART connection photo**
446 +**LG01-V2 UART connection photo**
545 545  
546 546  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
547 547  
... ... @@ -552,29 +552,23 @@
552 552  
553 553  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
554 554  
555 -
556 556  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
557 557  
558 558  
559 -= 7. OTA System Update =
460 += **7. FAQ** =
560 560  
561 561  
562 -LG01v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
463 +== **7.1 How does LG01-V2 communicate with Lora shield (LoRa.h)** ==
563 563  
564 564  
565 -= 8. FAQ =
466 +This example describes how to use LG01-V2, LoRa Shield to set up a LoRa network,
566 566  
567 -== 8.1 How does LG01v2 communicate with Lora shield (LoRa.h) ==
568 -
569 -
570 -This example describes how to use LG01v2, LoRa Shield to set up a LoRa network,
571 -
572 572  [[image:image-20221103152238-8.png||height="251" width="654"]]
573 573  
574 574  
575 -(% style="color:red" %)**Prerequisites: The configurations of LG01v2 and Lora shield must match**
471 +(% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
576 576  
577 -**LG01v2 configuration:**
473 +**LG01-V2 configuration:**
578 578  
579 579  (% class="box infomessage" %)
580 580  (((
... ... @@ -592,8 +592,6 @@
592 592  AT+RXDAFORM=1    
593 593  )))
594 594  
595 -
596 -
597 597  **Lora shield configuration:**
598 598  
599 599  Lora Shield example: [[attach:LoRa_Shield_Sketch_For_MQTT.ino||target="_blank"]] , [[attach:arduino-LoRa-master.zip||target="_blank"]]
... ... @@ -601,30 +601,27 @@
601 601  [[image:image-20221101161318-2.png]]
602 602  
603 603  
498 +**Test LG01-V2 to receive Lora Shield data:**
604 604  
605 -**Test LG01v2 to receive Lora Shield data:**
606 -
607 607  [[image:image-20221101161951-3.png]]
608 608  
609 609  
503 +**Test the LG01-V2 to send data:**
610 610  
611 -**Test the LG01v2 to send data:**
612 -
613 613  [[image:image-20221101162527-4.png]]
614 614  
615 615  
616 -== 8.2 How does LG01v2 communicate with Heltec LoRa Node ==
508 +== **7.2 How does LG01-V2 communicate with Heltec LoRa Node** ==
617 617  
618 618  
619 -This example describes how to use LG01v2 and Heltec LoRa Node to set up a LoRa network,
511 +This example describes how to use LG01-V2 and Heltec LoRa Node to set up a LoRa network,
620 620  
621 621  [[image:image-20221112161111-2.png||height="258" width="692"]]
622 622  
623 -(% style="color:red" %)**Prerequisites: The configurations of LG01v2 and Lora shield must match**
515 +(% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
624 624  
517 +**LG01-V2 configuration:**
625 625  
626 -**LG01v2 configuration:**
627 -
628 628  (% class="box infomessage" %)
629 629  (((
630 630  AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
... ... @@ -641,7 +641,6 @@
641 641  AT+RXDAFORM=1  ~-~--> RX data format**（0: Hex ,1: String）**
642 642  )))
643 643  
644 -
645 645  After we upload the sketch to Heltec LoRa Node, we can see below output from Arduino.
646 646  
647 647  Lora Shield example: [[attach:LoRa_send_trial.ino||target="_blank"]]
... ... @@ -653,76 +653,55 @@
653 653  
654 654  [[image:image-20221112163119-4.png||height="808" width="560"]]
655 655  
546 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
656 656  
657 -= 9. Trouble Shooting =
658 658  
659 -== 9.1  Fallback IP does not work, how can users check ==
660 -
661 -
662 -When the computer has completed the above fallback IP configuration,the LG01v2 Web UI is still not accessible via fallback IP.
663 -
664 -
665 -**1.Check whether the configuration is correct**
666 -
667 -Run the CMD command to ipconfig and ping 172.31.255.254.
668 -
669 -If this fails, the user needs to reconfigure.
670 -
671 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413170224-3.png?width=707&height=433&rev=1.1||alt="image-20230413170224-3.png"]]
672 -
673 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413170246-4.png?rev=1.1||alt="image-20230413170246-4.png"]]
674 -
675 -
676 -**2. Check whether the firewall is disabled**
677 -
678 -If the firewall is not down, this will affect access to the gateway.
679 -
680 -
681 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
682 -
683 -
684 684  (((
685 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
550 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
686 686  )))
687 687  
688 688  (((
689 -With your question as detailed as possible. We will reply and help you in the shortest.
554 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
690 690  
691 691  
692 -= 11. Reference =
693 693  
558 += **9. Reference** =
694 694  
695 -* Install Tago Core: Refer **Install Tago Core in LG01v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
696 696  
697 -* [[Advance OS Reference Guide for L>>doc:Main.Armbian OS instruction.WebHome]]G01v2.
561 +* Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
562 +* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
698 698  
699 -
700 700  
701 701  )))
702 702  
703 -= 12. Order Info =
567 += **10. Order Info** =
704 704  
705 705  
706 -(% style="color:#0000ff" %)**LG01v2-XXX-YYY**
570 +(% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
707 707  
708 708  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
709 709  
710 -* (% style="color:red" %)**868**(%%): For frequency : 863 ~~ 870Mhz
711 -* (% style="color:red" %)**915**(%%): For frequency : 902 ~~ 928Mhz
574 +* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
575 +* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
576 +* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
577 +* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
578 +* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
579 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
712 712  
713 713  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
714 714  
715 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
716 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America: Verizon, AT&T(FirstNet), U.S.Cellular; Canada: Telus
717 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
718 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
583 +* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
584 +* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
585 +* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
586 +* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
719 719  
720 720  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
721 721  
722 722  
723 -= 13. Manufacturer Info =
724 724  
592 += **10. Manufacturer Info** =
725 725  
594 +
726 726  **Shenzhen Dragino Technology Development co. LTD**
727 727  
728 728  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -730,9 +730,10 @@
730 730  LongCheng Street, LongGang District ; Shenzhen 518116,China
731 731  
732 732  
733 -= 14. FCC Warning =
734 734  
603 += **11. FCC Warning** =
735 735  
605 +
736 736  (((
737 737  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
738 738  )))
... ... @@ -762,6 +762,7 @@
762 762  (((
763 763  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
764 764  
765 -
766 766  
767 767  )))
637 +
638 +~)~)~)
Log-Temperature-Sensor-and-send-data-to-Node-red.json
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.3 KB
Content
... ... @@ -1,443 +1,0 @@
1 -[
2 - {
3 - "id": "0a211e08511c4bdd",
4 - "type": "tab",
5 - "label": "serial USB",
6 - "disabled": false,
7 - "info": "",
8 - "env": []
9 - },
10 - {
11 - "id": "4a97eeb54bf57a6d",
12 - "type": "serial in",
13 - "z": "0a211e08511c4bdd",
14 - "name": "",
15 - "serial": "bb1c0e81fd51fa9e",
16 - "x": 210,
17 - "y": 60,
18 - "wires": [
19 - [
20 - "d2493fb9752dbcab",
21 - "d183c255973c979e"
22 - ]
23 - ]
24 - },
25 - {
26 - "id": "12f1eeb8049675c1",
27 - "type": "inject",
28 - "z": "0a211e08511c4bdd",
29 - "name": "AT+SEND=1,hello world,0,3",
30 - "props": [
31 - {
32 - "p": "payload"
33 - }
34 - ],
35 - "repeat": "",
36 - "crontab": "",
37 - "once": false,
38 - "onceDelay": 0.1,
39 - "topic": "",
40 - "payload": "AT+SEND=1,hello world,0,3",
41 - "payloadType": "str",
42 - "x": 220,
43 - "y": 260,
44 - "wires": [
45 - [
46 - "a5d2f5df63a2148e"
47 - ]
48 - ]
49 - },
50 - {
51 - "id": "a5d2f5df63a2148e",
52 - "type": "serial out",
53 - "z": "0a211e08511c4bdd",
54 - "name": "",
55 - "serial": "bb1c0e81fd51fa9e",
56 - "x": 540,
57 - "y": 260,
58 - "wires": []
59 - },
60 - {
61 - "id": "dc04c04a0bc0e5db",
62 - "type": "inject",
63 - "z": "0a211e08511c4bdd",
64 - "name": "",
65 - "props": [
66 - {
67 - "p": "payload"
68 - }
69 - ],
70 - "repeat": "",
71 - "crontab": "",
72 - "once": false,
73 - "onceDelay": 0.1,
74 - "topic": "",
75 - "payload": "ATZ",
76 - "payloadType": "str",
77 - "x": 290,
78 - "y": 320,
79 - "wires": [
80 - [
81 - "a5d2f5df63a2148e"
82 - ]
83 - ]
84 - },
85 - {
86 - "id": "3de96a220e28e8f0",
87 - "type": "inject",
88 - "z": "0a211e08511c4bdd",
89 - "name": "AT+FRE",
90 - "props": [
91 - {
92 - "p": "payload"
93 - }
94 - ],
95 - "repeat": "",
96 - "crontab": "",
97 - "once": false,
98 - "onceDelay": 0.1,
99 - "topic": "",
100 - "payload": "AT+FRE=868.100,868.100",
101 - "payloadType": "str",
102 - "x": 280,
103 - "y": 380,
104 - "wires": [
105 - [
106 - "a5d2f5df63a2148e"
107 - ]
108 - ]
109 - },
110 - {
111 - "id": "638725a47a1e4365",
112 - "type": "inject",
113 - "z": "0a211e08511c4bdd",
114 - "name": "AT+BW",
115 - "props": [
116 - {
117 - "p": "payload"
118 - }
119 - ],
120 - "repeat": "",
121 - "crontab": "",
122 - "once": false,
123 - "onceDelay": 0.1,
124 - "topic": "",
125 - "payload": "AT+BW=0,0",
126 - "payloadType": "str",
127 - "x": 290,
128 - "y": 440,
129 - "wires": [
130 - [
131 - "a5d2f5df63a2148e"
132 - ]
133 - ]
134 - },
135 - {
136 - "id": "85ba9868d1f3e82c",
137 - "type": "inject",
138 - "z": "0a211e08511c4bdd",
139 - "name": "AT+SF",
140 - "props": [
141 - {
142 - "p": "payload"
143 - }
144 - ],
145 - "repeat": "",
146 - "crontab": "",
147 - "once": false,
148 - "onceDelay": 0.1,
149 - "topic": "",
150 - "payload": "AT+SF=12,12",
151 - "payloadType": "str",
152 - "x": 290,
153 - "y": 500,
154 - "wires": [
155 - [
156 - "a5d2f5df63a2148e"
157 - ]
158 - ]
159 - },
160 - {
161 - "id": "144b2749013ffe57",
162 - "type": "inject",
163 - "z": "0a211e08511c4bdd",
164 - "name": "AT+RXMOD",
165 - "props": [
166 - {
167 - "p": "payload"
168 - }
169 - ],
170 - "repeat": "",
171 - "crontab": "",
172 - "once": false,
173 - "onceDelay": 0.1,
174 - "topic": "",
175 - "payload": "AT+RXMOD=65535,2",
176 - "payloadType": "str",
177 - "x": 270,
178 - "y": 560,
179 - "wires": [
180 - [
181 - "a5d2f5df63a2148e"
182 - ]
183 - ]
184 - },
185 - {
186 - "id": "bfb2e9df89dc5e2f",
187 - "type": "inject",
188 - "z": "0a211e08511c4bdd",
189 - "name": "AT+SYNCWORD",
190 - "props": [
191 - {
192 - "p": "payload"
193 - }
194 - ],
195 - "repeat": "",
196 - "crontab": "",
197 - "once": false,
198 - "onceDelay": 0.1,
199 - "topic": "",
200 - "payload": "AT+SYNCWORD=0",
201 - "payloadType": "str",
202 - "x": 260,
203 - "y": 620,
204 - "wires": [
205 - [
206 - "a5d2f5df63a2148e"
207 - ]
208 - ]
209 - },
210 - {
211 - "id": "d2493fb9752dbcab",
212 - "type": "function",
213 - "z": "0a211e08511c4bdd",
214 - "name": "function 1",
215 - "func": "var data = msg.payload\nif (data.substring(0, 4) == \"Data\") {\n if (data.substring(6, 12) == \"(HEX:)\") {\n var temp = data.substring(13, 15) + data.substring(16, 18)\n var hum = data.substring(19, 21) + data.substring(22, 24)\n var temp1 = parseInt(temp, 16) / 100\n var hum1 = parseInt(hum, 16) / 10\n var a1 = { payload: temp1 }, a2 = { payload: hum1 }\n }\n if (data.substring(6, 15) == \"(String:)\") {\n var temp = data.substring(20, 24)\n var hum = data.substring(29, 34)\n a1 = { payload: temp }, a2 = { payload: hum }\n }\n}\nif (data.substring(0, 4) == \"Rssi\") {\n var rssi = data.substring(6)\n var a3 = { payload: rssi }\n}\nreturn [a1, a2, a3];",
216 - "outputs": 3,
217 - "noerr": 0,
218 - "initialize": "",
219 - "finalize": "",
220 - "libs": [],
221 - "x": 420,
222 - "y": 60,
223 - "wires": [
224 - [
225 - "c17d94be4317ae6c"
226 - ],
227 - [
228 - "20c5b1c7f42fa6bb"
229 - ],
230 - [
231 - "39a8462f3d748eef"
232 - ]
233 - ]
234 - },
235 - {
236 - "id": "39a8462f3d748eef",
237 - "type": "ui_chart",
238 - "z": "0a211e08511c4bdd",
239 - "name": "",
240 - "group": "ef41b39771110fa5",
241 - "order": 1,
242 - "width": 0,
243 - "height": 0,
244 - "label": "RSSI",
245 - "chartType": "line",
246 - "legend": "false",
247 - "xformat": "dd HH:mm",
248 - "interpolate": "linear",
249 - "nodata": "",
250 - "dot": true,
251 - "ymin": "",
252 - "ymax": "",
253 - "removeOlder": 1,
254 - "removeOlderPoints": "",
255 - "removeOlderUnit": "3600",
256 - "cutout": 0,
257 - "useOneColor": false,
258 - "useUTC": false,
259 - "colors": [
260 - "#1f77b4",
261 - "#aec7e8",
262 - "#ff7f0e",
263 - "#2ca02c",
264 - "#98df8a",
265 - "#d62728",
266 - "#ff9896",
267 - "#9467bd",
268 - "#c5b0d5"
269 - ],
270 - "outputs": 1,
271 - "useDifferentColor": false,
272 - "className": "",
273 - "x": 670,
274 - "y": 180,
275 - "wires": [
276 - []
277 - ]
278 - },
279 - {
280 - "id": "c17d94be4317ae6c",
281 - "type": "ui_chart",
282 - "z": "0a211e08511c4bdd",
283 - "name": "",
284 - "group": "7e1d1c102cf74e6b",
285 - "order": 1,
286 - "width": 0,
287 - "height": 0,
288 - "label": "Temperature",
289 - "chartType": "line",
290 - "legend": "false",
291 - "xformat": "HH:mm:ss",
292 - "interpolate": "linear",
293 - "nodata": "",
294 - "dot": true,
295 - "ymin": "",
296 - "ymax": "",
297 - "removeOlder": 1,
298 - "removeOlderPoints": "",
299 - "removeOlderUnit": "3600",
300 - "cutout": 0,
301 - "useOneColor": false,
302 - "useUTC": false,
303 - "colors": [
304 - "#1f77b4",
305 - "#aec7e8",
306 - "#ff7f0e",
307 - "#2ca02c",
308 - "#98df8a",
309 - "#d62728",
310 - "#ff9896",
311 - "#9467bd",
312 - "#c5b0d5"
313 - ],
314 - "outputs": 1,
315 - "useDifferentColor": false,
316 - "className": "",
317 - "x": 690,
318 - "y": 100,
319 - "wires": [
320 - []
321 - ]
322 - },
323 - {
324 - "id": "20c5b1c7f42fa6bb",
325 - "type": "ui_chart",
326 - "z": "0a211e08511c4bdd",
327 - "name": "",
328 - "group": "3f5d139f158d7c1c",
329 - "order": 2,
330 - "width": 0,
331 - "height": 0,
332 - "label": "Humidity",
333 - "chartType": "line",
334 - "legend": "false",
335 - "xformat": "HH:mm:ss",
336 - "interpolate": "linear",
337 - "nodata": "",
338 - "dot": true,
339 - "ymin": "",
340 - "ymax": "",
341 - "removeOlder": 1,
342 - "removeOlderPoints": "",
343 - "removeOlderUnit": "3600",
344 - "cutout": 0,
345 - "useOneColor": false,
346 - "useUTC": false,
347 - "colors": [
348 - "#1f77b4",
349 - "#aec7e8",
350 - "#ff7f0e",
351 - "#2ca02c",
352 - "#98df8a",
353 - "#d62728",
354 - "#ff9896",
355 - "#9467bd",
356 - "#c5b0d5"
357 - ],
358 - "outputs": 1,
359 - "useDifferentColor": false,
360 - "className": "",
361 - "x": 680,
362 - "y": 140,
363 - "wires": [
364 - []
365 - ]
366 - },
367 - {
368 - "id": "d183c255973c979e",
369 - "type": "debug",
370 - "z": "0a211e08511c4bdd",
371 - "name": "debug 1",
372 - "active": true,
373 - "tosidebar": true,
374 - "console": false,
375 - "tostatus": false,
376 - "complete": "false",
377 - "statusVal": "",
378 - "statusType": "auto",
379 - "x": 420,
380 - "y": 180,
381 - "wires": []
382 - },
383 - {
384 - "id": "bb1c0e81fd51fa9e",
385 - "type": "serial-port",
386 - "serialport": "/dev/ttyUSB0",
387 - "serialbaud": "9600",
388 - "databits": "8",
389 - "parity": "none",
390 - "stopbits": "1",
391 - "waitfor": "",
392 - "dtr": "none",
393 - "rts": "none",
394 - "cts": "none",
395 - "dsr": "none",
396 - "newline": "\\n",
397 - "bin": "false",
398 - "out": "char",
399 - "addchar": "\\r\\n",
400 - "responsetimeout": "10000"
401 - },
402 - {
403 - "id": "ef41b39771110fa5",
404 - "type": "ui_group",
405 - "name": "rssi",
406 - "tab": "abb98f80600a5448",
407 - "order": 3,
408 - "disp": true,
409 - "width": "6",
410 - "collapse": false,
411 - "className": ""
412 - },
413 - {
414 - "id": "7e1d1c102cf74e6b",
415 - "type": "ui_group",
416 - "name": "TEM",
417 - "tab": "abb98f80600a5448",
418 - "order": 4,
419 - "disp": true,
420 - "width": "6",
421 - "collapse": false,
422 - "className": ""
423 - },
424 - {
425 - "id": "3f5d139f158d7c1c",
426 - "type": "ui_group",
427 - "name": "HUM",
428 - "tab": "abb98f80600a5448",
429 - "order": 2,
430 - "disp": true,
431 - "width": "6",
432 - "collapse": false,
433 - "className": ""
434 - },
435 - {
436 - "id": "abb98f80600a5448",
437 - "type": "ui_tab",
438 - "name": "LG01v2",
439 - "icon": "LG01v2",
440 - "disabled": false,
441 - "hidden": false
442 - }
443 -]
image-20230504095457-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -412.6 KB
Content
image-20230504095502-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -412.6 KB
Content
image-20230504100722-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.5 KB
Content
image-20230506110646-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -383.1 KB
Content
image-20230506113332-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.6 KB
Content
image-20230506113432-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -36.5 KB
Content
image-20230506113531-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -403.2 KB
Content
image-20230506113602-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -26.7 KB
Content
image-20230506113623-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.4 KB
Content
image-20230506113705-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -40.9 KB
Content
image-20230506113722-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.2 KB
Content
image-20230506113737-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20230506113813-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -39.5 KB
Content
image-20230506113831-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -32.2 KB
Content
image-20230506114127-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.1 KB
Content
image-20230506115438-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -413.6 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0