Last modified by Kilight Cao on 2024/10/12 08:58
<
From version < 133.1 >
edited by Kilight Cao
on 2023/06/07 17:37
To version < 150.1
edited by Kilight Cao
on 2024/10/12 08:58
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -7,7 +7,7 @@
7 7  
8 8  )))
9 9  
10 -**Table of Contents：**
10 +**Table of Contents:**
11 11  
12 12  {{toc/}}
13 13  
... ... @@ -25,7 +25,9 @@
25 25  (((
26 26  The LG01v2 is an (% style="color:blue" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  
28 -LG01v2 is specially design for (% style="color:blue" %)**peer to peer LoRa**(%%) protocol instead of LoRaWAN protocol. The LG01v2 use single channel LoRa module to minimize the deployment cost for a private p2p LoRa wireless network.
28 +LG01v2 is specially designed for (% style="color:blue" %)**peer-to-peer LoRa**(%%) protocol instead of LoRaWAN protocol. The LG01v2 uses a single-channel LoRa module to minimize the deployment cost for a private p2p LoRa wireless network.
29 +
30 +(% style="color:red" %)**Note: The LG01v2 can't register and connect to the LoRaWAN server(Such as The Things NetWork, AWS, or Chirpstack..)**
29 29  )))
30 30  
31 31  (((
... ... @@ -55,7 +55,6 @@
55 55  * Storage Temperature: -20 ~~ 65°C
56 56  * Power Input: 5V, 2A, DC
57 57  
58 -
59 59  == 1.3 Features ==
60 60  
61 61  
... ... @@ -66,7 +66,6 @@
66 66  * LoRa Gateway
67 67  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
68 68  
69 -
70 70  == 1.4 Block Diagram ==
71 71  
72 72  
... ... @@ -77,21 +77,15 @@
77 77  LG01-V2 has totally four LEDs, They are:
78 78  
79 79  
80 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
80 +(% style="color:blue" %)**➢ Power LED**[[image:image-20231014092959-4.png]](%%): This RED LED will be solid if the device is properly powered
81 81  
82 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
82 +(% style="color:blue" %)**➢ ETH LED**[[image:image-20231014092934-2.png]](%%):  This RGB LED will blink GREEN when the ETH port is connecting
83 83  
84 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
84 +(% style="color:blue" %)**➢ SYS LED**[[image:image-20231014092954-3.png]](%%):  Undefined yet. 
85 85  
86 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
86 +(% style="color:blue" %)**➢ WIFI LED**[[image:image-20231014092843-1.png]](%%): This LED shows the WIFI interface connection status.
87 87  
88 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
89 89  
90 - ✓** SOLID RED:** Device doesn't have an Internet connection.
91 -
92 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
93 -
94 -
95 95  == 1.6 Button Intruction ==
96 96  
97 97  
... ... @@ -118,12 +118,9 @@
118 118  
119 119  == 2.1 Access and Configure LG01-v2 ==
120 120  
121 -
122 -Users can access and configure the LG01-v2 after connecting to its WiFi network, or via its Ethernet port.
123 -
124 -
125 125  === 2.1.1 Find IP address of LG01-v2 ===
126 126  
117 +
127 127  ==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
128 128  
129 129  
... ... @@ -381,7 +381,6 @@
381 381  * **LA66 Shield + UNO + DHT11**: The UNO will get the temperature and humidity and broadcast the value via LoRa protocol.
382 382  * **LG01v2** : LG01v2 is set to listening the LoRa Channel which LA66 is broadcasting. When LG01v2 get the data from LA66, LG01v2 will plot the data in built-in IoT server.
383 383  
384 -
385 385  === 5.2.2 Set Up LA66 Shield + UNO ===
386 386  
387 387  
... ... @@ -523,12 +523,17 @@
523 523  [[image:image-20221108180458-11.png||height="402" width="1137"]]
524 524  
525 525  
526 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)6. How users can access LG01(%%)v(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%) =
527 527  
517 += 6. OTA System Update =
528 528  
529 -(% style="color:blue" %)**USB TTL to LG01v2  Connection:**
530 530  
520 +LG01v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
531 531  
522 +
523 += 7. How users can access LG01v2 using serial USB =
524 +
525 +**USB TTL to LG01v2  Connection:**
526 +
532 532  Port 1 of the UART on the LG01v2 is GND
533 533  
534 534  (% class="box infomessage" %)
... ... @@ -540,28 +540,17 @@
540 540  **GND <~-~--> GND (Black line)**
541 541  )))
542 542  
543 -
544 544  **LG01v2 UART connection photo**
545 545  
546 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
540 +[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230421094319-2.png?width=392&height=351&rev=1.1||alt="image-20230421094319-2.png"]]
547 547  
542 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
548 548  
544 +[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
549 549  
550 -In the PC, you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LG01v2. LG01v2 will output system info once power on as below:
546 +[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
551 551  
552 552  
553 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
554 -
555 -
556 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
557 -
558 -
559 -= 7. OTA System Update =
560 -
561 -
562 -LG01v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
563 -
564 -
565 565  = 8. FAQ =
566 566  
567 567  == 8.1 How does LG01v2 communicate with Lora shield (LoRa.h) ==
... ... @@ -654,6 +654,78 @@
654 654  [[image:image-20221112163119-4.png||height="808" width="560"]]
655 655  
656 656  
641 +== 8.3 How does LG01v2 communicate with LoRaWAN node ==
642 +
643 +
644 +This example describes how to use LG01v2 and LSN50 to set up a  network,
645 +
646 +In this case, users need to set LSN50 to work in ABP mode and transmit in only one frequency.
647 +
648 +Assume we have a LG01v2 working in the frequency 868100000 now, below is the steps.
649 +
650 +
651 +**Step1: **Configure the LG01v2
652 +
653 +(% class="box infomessage" %)
654 +(((
655 +AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
656 +AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
657 +AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
658 +AT+SYNCWORD=1  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
659 +)))
660 +
661 +**Step2:  **Run AT commands to make the LSN50 work in Single frequency and ABP mode.
662 +
663 +For more information on how to use AT commands in LSN50v2, please refer to this link: [[LSN50v2-S31-S31B Use AT Command>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/#H4.A0UseATCommand]]
664 +
665 +Below are the AT commands:
666 +
667 +(% class="box infomessage" %)
668 +(((
669 +AT+FDR  ~-~--> Reset Parameters to Factory Default, Keys Reserve
670 +AT+NJM=0  ~-~-->  Set to ABP mode
671 +AT+ADR=0  ~-~-->  Set the Adaptive Data Rate Off
672 +AT+DR=0  ~-~--> Set Data Rate (Set AT+DR=3 for 915 band)
673 +AT+TDC=300000  ~-~-->  Set transmit interval to 5 minutes
674 +AT+CHS=868100000  ~-~--> Set transmit frequency to 868.1Mhz
675 +AT+DADDR=FFFFF111  ~-~--> Set Device Address to 26 01 1A F1
676 +ATZ  ~-~--> Reset MCU
677 +)))
678 +
679 +**Step3:  **Check result
680 +
681 +
682 +
683 +User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
684 +
685 +User can import this example in Node-Red: [[attach:LG01v2_LSN50v2_S31.json||target="_blank"]]
686 +
687 +
688 +First the user needs to fill in the NwkSkey and AppSkey in the LoraWan Packet Decrypter node.
689 +
690 +[[image:image-20230620103535-2.png||height="591" width="1138"]]
691 +
692 +[[image:image-20230620103153-1.png||height="610" width="1141"]]
693 +
694 +
695 +The data will be displayed in the built-in node-red UI
696 +
697 +**Browser input: (% style="background-color:yellow" %)__//http:~/~/<local-IPV4-address>//__(%%)**
698 +
699 +[[image:image-20230620103923-3.png||height="476" width="1138"]]
700 +
701 +
702 +== 8.4 How can users factory reset LG01v2 ==
703 +
704 +
705 +Users can download the image of LG01v2 from this link：[[dragino-lg01v2-1.7-0210>>https://www.dropbox.com/scl/fi/g0si61lcrvdjyto4ma951/dragino-lg01v2-1.7-0210.zip?rlkey=t03oqo493r2p7ign488rs2jsv&dl=0]]
706 +
707 +
708 +Then follow the steps in the link below to restore factory Settings to LG01v2：
709 +
710 +[[How to flash a new image(OS) to the gateway>>url:https://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
711 +
712 +
657 657  = 9. Trouble Shooting =
658 658  
659 659  == 9.1  Fallback IP does not work, how can users check ==
... ... @@ -693,6 +693,7 @@
693 693  
694 694  
695 695  * Install Tago Core: Refer **Install Tago Core in LG01v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
752 +
696 696  * [[Advance OS Reference Guide for L>>doc:Main.Armbian OS instruction.WebHome]]G01v2.
697 697  
698 698  
... ... @@ -710,10 +710,10 @@
710 710  
711 711  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
712 712  
713 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
714 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
715 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
716 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
770 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
771 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America: Verizon, AT&T(FirstNet), U.S.Cellular; Canada: Telus
772 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
773 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
717 717  
718 718  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
719 719  
LG01v2_LSN50v2_S31.json
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +16.5 KB
Content
... ... @@ -1,0 +1,587 @@
1 +[
2 + {
3 + "id": "5e07f5eeeb2a969b",
4 + "type": "tab",
5 + "label": "流程 1",
6 + "disabled": false,
7 + "info": "",
8 + "env": []
9 + },
10 + {
11 + "id": "9c26fa2f19e2b556",
12 + "type": "function",
13 + "z": "5e07f5eeeb2a969b",
14 + "name": "hex to base64",
15 + "func": "var input = msg.payload;\nvar base64 = Buffer.from(input, 'hex').toString('base64');\nmsg.payload = base64;\nreturn msg;",
16 + "outputs": 1,
17 + "noerr": 0,
18 + "initialize": "",
19 + "finalize": "",
20 + "libs": [],
21 + "x": 220,
22 + "y": 160,
23 + "wires": [
24 + [
25 + "075bc9172a4c6570",
26 + "3601a98894805fbe"
27 + ]
28 + ]
29 + },
30 + {
31 + "id": "ee0480c81e66d657",
32 + "type": "function",
33 + "z": "5e07f5eeeb2a969b",
34 + "name": "function 4",
35 + "func": "var bytes = msg.payload[\"uplink_message\"]\nvar data = msg.payload[\"out\"]\nvar mode = (parseInt(data.substring(12, 14), 16) & 0x7C) >> 2;\nif (mode != 2)\n{\nvar bat = (parseInt(data.substring(0,4),16)&0x3FFF)/1000;\nvar TempC1 = (parseFloat(parseInt(data.substring(4, 8),16)/10).toFixed(2));\nvar ADC_CH0V = (parseInt(data.substring(8, 12), 16) ) / 1000;\nvar Digital_IStatus = (parseInt((data.substring(8, 12),16) & 0x02))?\"H\":\"L\"; \n\nif (mode != 6) {\n\n var EXTI_Trigger = ((parseInt(data.substring(12, 14), 16) & 0x01))? \"TRUE\" : \"FALSE\";\n\n var Door_status = ((parseInt(data.substring(12, 14), 16) & 0x80))? \"CLOSE\" : \"OPEN\";\n\n}\n}\nif (mode == 0) {\n\n var Work_mode = \"IIC\";\n\n if ((parseInt(data.substring(18, 22), 16)) == 0){\n\n var Illum = (parseInt(data.substring(8, 12), 16));\n\n }\n\n else {\n\n var TempC_SHT = parseFloat(((parseInt(data.substring(14, 18), 16)) / 10).toFixed(2));\n\n var Hum_SHT = parseFloat((((parseInt(data.substring(18, 22), 16))) / 10).toFixed(1));\n\n }\n \n}\n\nelse if (mode == 1) {\n\n var Work_mode = \" Distance\";\n\n var Distance_cm = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(1));\n\n if (((parseInt(data.substring(18, 22), 16))) != 65535){\n\n var Distance_signal_strength = parseFloat(((parseInt(data.substring(18, 22), 16))).toFixed(0));\n\n }\n\n}\n\nelse if (mode == 2) {\n\n var Work_mode = \" 3ADC\";\n\n var BatV = (parseInt(data.substring(18, 22), 16)) / 10;\n\n var ADC_CH0V = ((parseInt(data.substring(0, 4), 16))) / 1000;\n\n var ADC_CH1V = ((parseInt(data.substring(4, 8), 16))) / 1000;\n\n var ADC_CH4V = ((parseInt(data.substring(8, 12), 16))) / 1000;\n\n var Digital_IStatus = ((parseInt(data.substring(12, 14), 16)) & 0x02) ? \"H\" : \"L\";\n\n var EXTI_Trigger = ((parseInt(data.substring(12, 14), 16)) & 0x01) ? \"TRUE\" : \"FALSE\";\n\n var Door_status = ((parseInt(data.substring(13, 14), 16)) & 0x80) ? \"CLOSE\" : \"OPEN\";\n\n if ((parseInt(data.substring(18, 22), 16) === 0)) {\n\n var Illum = ((parseInt(data.substring(14, 18), 16)));\n\n }\n\n else {\n\n var TempC_SHT = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(2));\n\n var Hum_SHT = parseFloat((((parseInt(data.substring(18, 24), 16))) / 10).toFixed(1));\n\n }\n\n}\n\nelse if (mode == 3) {\n\n var Work_mode = \"3DS18B20\";\n\n var TempC2 = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(2));\n\n var TempC3 = parseFloat((((parseInt(data.substring(18, 24), 16))) / 10).toFixed(1));\n\n\n\n}\n\nelse if (mode == 4) {\n\n var Work_mode = \"Weight\";\n\n var Weight = ((parseInt(data.substring(14, 18), 16)));\n\n}\n\nelse if (mode == 5) {\n\n var Work_mode = \"Count\";\n\n var Count = ((parseInt(data.substring(14, 22), 16)));\n\n}\n\n\n\nvar b = { payload: bat }, c = { payload: TempC1 }, d = { payload: ADC_CH0V }, e = { payload: Digital_IStatus }, f = { payload: EXTI_Trigger }, g = { payload: Door_status }, j = { payload: TempC_SHT }, s = { payload: Hum_SHT }, k = { payload: Work_mode };\nreturn [b,c,d,e,f,g,j,k,s];",
36 + "outputs": 9,
37 + "noerr": 0,
38 + "initialize": "",
39 + "finalize": "",
40 + "libs": [],
41 + "x": 660,
42 + "y": 300,
43 + "wires": [
44 + [
45 + "fd22b92d2b8de0fb"
46 + ],
47 + [
48 + "3307256a4e1ea53a"
49 + ],
50 + [
51 + "a3fd8302ec399e31"
52 + ],
53 + [
54 + "c7d1f63ff5f0026a"
55 + ],
56 + [
57 + "159967056da52706"
58 + ],
59 + [
60 + "a21581a41adc1714"
61 + ],
62 + [
63 + "7bb78b78445ac9e3"
64 + ],
65 + [
66 + "0364752170ed6228"
67 + ],
68 + [
69 + "65293155d71d54b9"
70 + ]
71 + ]
72 + },
73 + {
74 + "id": "e763b293d42dbdd5",
75 + "type": "change",
76 + "z": "5e07f5eeeb2a969b",
77 + "name": "",
78 + "rules": [
79 + {
80 + "t": "change",
81 + "p": "payload",
82 + "pt": "msg",
83 + "from": "Data: (HEX:)",
84 + "fromt": "str",
85 + "to": "",
86 + "tot": "str"
87 + },
88 + {
89 + "t": "change",
90 + "p": "payload",
91 + "pt": "msg",
92 + "from": " ",
93 + "fromt": "str",
94 + "to": "",
95 + "tot": "str"
96 + }
97 + ],
98 + "action": "",
99 + "property": "",
100 + "from": "",
101 + "to": "",
102 + "reg": false,
103 + "x": 420,
104 + "y": 60,
105 + "wires": [
106 + [
107 + "9c26fa2f19e2b556",
108 + "416a930e89291528"
109 + ]
110 + ]
111 + },
112 + {
113 + "id": "075bc9172a4c6570",
114 + "type": "lorawan-packet-decrypt-nwkey-appkey",
115 + "z": "5e07f5eeeb2a969b",
116 + "name": "FFFFF111",
117 + "nsw": "CCFFFFFFFFFFFFFFFFFFFFFFFFFFFFAA",
118 + "asw": "FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCC",
119 + "x": 510,
120 + "y": 160,
121 + "wires": [
122 + [
123 + "ee0480c81e66d657"
124 + ]
125 + ]
126 + },
127 + {
128 + "id": "13dc77a4e2bb4f72",
129 + "type": "serial in",
130 + "z": "5e07f5eeeb2a969b",
131 + "name": "",
132 + "serial": "bb1c0e81fd51fa9e",
133 + "x": 190,
134 + "y": 60,
135 + "wires": [
136 + [
137 + "e763b293d42dbdd5"
138 + ]
139 + ]
140 + },
141 + {
142 + "id": "3307256a4e1ea53a",
143 + "type": "ui_chart",
144 + "z": "5e07f5eeeb2a969b",
145 + "name": "",
146 + "group": "c1fddd37879528e5",
147 + "order": 1,
148 + "width": 0,
149 + "height": 0,
150 + "label": "TempC1",
151 + "chartType": "line",
152 + "legend": "false",
153 + "xformat": "HH:mm:ss",
154 + "interpolate": "linear",
155 + "nodata": "",
156 + "dot": false,
157 + "ymin": "",
158 + "ymax": "",
159 + "removeOlder": 1,
160 + "removeOlderPoints": "",
161 + "removeOlderUnit": "3600",
162 + "cutout": 0,
163 + "useOneColor": false,
164 + "useUTC": false,
165 + "colors": [
166 + "#1f77b4",
167 + "#aec7e8",
168 + "#ff7f0e",
169 + "#2ca02c",
170 + "#98df8a",
171 + "#d62728",
172 + "#ff9896",
173 + "#9467bd",
174 + "#c5b0d5"
175 + ],
176 + "outputs": 1,
177 + "useDifferentColor": false,
178 + "className": "",
179 + "x": 940,
180 + "y": 160,
181 + "wires": [
182 + []
183 + ]
184 + },
185 + {
186 + "id": "a3fd8302ec399e31",
187 + "type": "ui_chart",
188 + "z": "5e07f5eeeb2a969b",
189 + "name": "",
190 + "group": "6d46fdae9f413f7b",
191 + "order": 1,
192 + "width": 0,
193 + "height": 0,
194 + "label": "ADC_CH0V",
195 + "chartType": "line",
196 + "legend": "false",
197 + "xformat": "HH:mm:ss",
198 + "interpolate": "linear",
199 + "nodata": "",
200 + "dot": false,
201 + "ymin": "",
202 + "ymax": "",
203 + "removeOlder": 1,
204 + "removeOlderPoints": "",
205 + "removeOlderUnit": "3600",
206 + "cutout": 0,
207 + "useOneColor": false,
208 + "useUTC": false,
209 + "colors": [
210 + "#1f77b4",
211 + "#aec7e8",
212 + "#ff7f0e",
213 + "#2ca02c",
214 + "#98df8a",
215 + "#d62728",
216 + "#ff9896",
217 + "#9467bd",
218 + "#c5b0d5"
219 + ],
220 + "outputs": 1,
221 + "useDifferentColor": false,
222 + "className": "",
223 + "x": 950,
224 + "y": 200,
225 + "wires": [
226 + []
227 + ]
228 + },
229 + {
230 + "id": "fd22b92d2b8de0fb",
231 + "type": "ui_chart",
232 + "z": "5e07f5eeeb2a969b",
233 + "name": "",
234 + "group": "bb5657c2a8c290a3",
235 + "order": 1,
236 + "width": 0,
237 + "height": 0,
238 + "label": "BatV",
239 + "chartType": "line",
240 + "legend": "false",
241 + "xformat": "HH:mm:ss",
242 + "interpolate": "linear",
243 + "nodata": "",
244 + "dot": false,
245 + "ymin": "",
246 + "ymax": "",
247 + "removeOlder": 1,
248 + "removeOlderPoints": "",
249 + "removeOlderUnit": "3600",
250 + "cutout": 0,
251 + "useOneColor": false,
252 + "useUTC": false,
253 + "colors": [
254 + "#1f77b4",
255 + "#aec7e8",
256 + "#ff7f0e",
257 + "#2ca02c",
258 + "#98df8a",
259 + "#d62728",
260 + "#ff9896",
261 + "#9467bd",
262 + "#c5b0d5"
263 + ],
264 + "outputs": 1,
265 + "useDifferentColor": false,
266 + "className": "",
267 + "x": 930,
268 + "y": 120,
269 + "wires": [
270 + []
271 + ]
272 + },
273 + {
274 + "id": "c7d1f63ff5f0026a",
275 + "type": "ui_text",
276 + "z": "5e07f5eeeb2a969b",
277 + "group": "528e965cef294158",
278 + "order": 0,
279 + "width": "6",
280 + "height": "4",
281 + "name": "",
282 + "label": "Digital_IStatus",
283 + "format": "{{msg.payload}}",
284 + "layout": "col-center",
285 + "className": "",
286 + "x": 960,
287 + "y": 240,
288 + "wires": []
289 + },
290 + {
291 + "id": "159967056da52706",
292 + "type": "ui_text",
293 + "z": "5e07f5eeeb2a969b",
294 + "group": "5e615e3edb5999a0",
295 + "order": 0,
296 + "width": "6",
297 + "height": "4",
298 + "name": "",
299 + "label": "EXTI_Trigger",
300 + "format": "{{msg.payload}}",
301 + "layout": "col-center",
302 + "className": "",
303 + "x": 950,
304 + "y": 280,
305 + "wires": []
306 + },
307 + {
308 + "id": "7bb78b78445ac9e3",
309 + "type": "ui_chart",
310 + "z": "5e07f5eeeb2a969b",
311 + "name": "",
312 + "group": "5f7fec85295a7f7c",
313 + "order": 0,
314 + "width": 0,
315 + "height": 0,
316 + "label": "TempC_SHT",
317 + "chartType": "line",
318 + "legend": "false",
319 + "xformat": "HH:mm:ss",
320 + "interpolate": "linear",
321 + "nodata": "",
322 + "dot": false,
323 + "ymin": "",
324 + "ymax": "",
325 + "removeOlder": 1,
326 + "removeOlderPoints": "",
327 + "removeOlderUnit": "3600",
328 + "cutout": 0,
329 + "useOneColor": false,
330 + "useUTC": false,
331 + "colors": [
332 + "#1f77b4",
333 + "#aec7e8",
334 + "#ff7f0e",
335 + "#2ca02c",
336 + "#98df8a",
337 + "#d62728",
338 + "#ff9896",
339 + "#9467bd",
340 + "#c5b0d5"
341 + ],
342 + "outputs": 1,
343 + "useDifferentColor": false,
344 + "className": "",
345 + "x": 950,
346 + "y": 360,
347 + "wires": [
348 + []
349 + ]
350 + },
351 + {
352 + "id": "0364752170ed6228",
353 + "type": "ui_text",
354 + "z": "5e07f5eeeb2a969b",
355 + "group": "3cb616f18674c42a",
356 + "order": 0,
357 + "width": "6",
358 + "height": "4",
359 + "name": "",
360 + "label": "Work_mode",
361 + "format": "{{msg.payload}}",
362 + "layout": "col-center",
363 + "className": "",
364 + "x": 950,
365 + "y": 400,
366 + "wires": []
367 + },
368 + {
369 + "id": "65293155d71d54b9",
370 + "type": "ui_chart",
371 + "z": "5e07f5eeeb2a969b",
372 + "name": "",
373 + "group": "bb2e35e7a931c198",
374 + "order": 0,
375 + "width": 0,
376 + "height": 0,
377 + "label": "Hum_SHT",
378 + "chartType": "line",
379 + "legend": "false",
380 + "xformat": "HH:mm:ss",
381 + "interpolate": "linear",
382 + "nodata": "",
383 + "dot": false,
384 + "ymin": "",
385 + "ymax": "",
386 + "removeOlder": 1,
387 + "removeOlderPoints": "",
388 + "removeOlderUnit": "3600",
389 + "cutout": 0,
390 + "useOneColor": false,
391 + "useUTC": false,
392 + "colors": [
393 + "#1f77b4",
394 + "#aec7e8",
395 + "#ff7f0e",
396 + "#2ca02c",
397 + "#98df8a",
398 + "#d62728",
399 + "#ff9896",
400 + "#9467bd",
401 + "#c5b0d5"
402 + ],
403 + "outputs": 1,
404 + "useDifferentColor": false,
405 + "className": "",
406 + "x": 950,
407 + "y": 440,
408 + "wires": [
409 + []
410 + ]
411 + },
412 + {
413 + "id": "a21581a41adc1714",
414 + "type": "ui_text",
415 + "z": "5e07f5eeeb2a969b",
416 + "group": "9109ae41eee353df",
417 + "order": 0,
418 + "width": "6",
419 + "height": "4",
420 + "name": "",
421 + "label": "Door_status",
422 + "format": "{{msg.payload}}",
423 + "layout": "col-center",
424 + "className": "",
425 + "x": 950,
426 + "y": 320,
427 + "wires": []
428 + },
429 + {
430 + "id": "416a930e89291528",
431 + "type": "debug",
432 + "z": "5e07f5eeeb2a969b",
433 + "name": "debug 2",
434 + "active": true,
435 + "tosidebar": true,
436 + "console": false,
437 + "tostatus": false,
438 + "complete": "false",
439 + "statusVal": "",
440 + "statusType": "auto",
441 + "x": 660,
442 + "y": 60,
443 + "wires": []
444 + },
445 + {
446 + "id": "3601a98894805fbe",
447 + "type": "debug",
448 + "z": "5e07f5eeeb2a969b",
449 + "name": "debug 3",
450 + "active": true,
451 + "tosidebar": true,
452 + "console": false,
453 + "tostatus": false,
454 + "complete": "false",
455 + "statusVal": "",
456 + "statusType": "auto",
457 + "x": 380,
458 + "y": 240,
459 + "wires": []
460 + },
461 + {
462 + "id": "bb1c0e81fd51fa9e",
463 + "type": "serial-port",
464 + "serialport": "/dev/ttyUSB0",
465 + "serialbaud": "9600",
466 + "databits": "8",
467 + "parity": "none",
468 + "stopbits": "1",
469 + "waitfor": "",
470 + "dtr": "none",
471 + "rts": "none",
472 + "cts": "none",
473 + "dsr": "none",
474 + "newline": "\\n",
475 + "bin": "false",
476 + "out": "char",
477 + "addchar": "\\r\\n",
478 + "responsetimeout": "10000"
479 + },
480 + {
481 + "id": "c1fddd37879528e5",
482 + "type": "ui_group",
483 + "name": "BatV",
484 + "tab": "abb98f80600a5448",
485 + "order": 1,
486 + "disp": true,
487 + "width": "6",
488 + "collapse": false,
489 + "className": ""
490 + },
491 + {
492 + "id": "6d46fdae9f413f7b",
493 + "type": "ui_group",
494 + "name": "ADC_CH0V",
495 + "tab": "abb98f80600a5448",
496 + "order": 1,
497 + "disp": true,
498 + "width": "6",
499 + "collapse": false,
500 + "className": ""
501 + },
502 + {
503 + "id": "bb5657c2a8c290a3",
504 + "type": "ui_group",
505 + "name": "BatV",
506 + "tab": "abb98f80600a5448",
507 + "order": 3,
508 + "disp": true,
509 + "width": "6",
510 + "collapse": false,
511 + "className": ""
512 + },
513 + {
514 + "id": "528e965cef294158",
515 + "type": "ui_group",
516 + "name": "Digital_IStatus",
517 + "tab": "abb98f80600a5448",
518 + "order": 4,
519 + "disp": true,
520 + "width": "6",
521 + "collapse": false,
522 + "className": ""
523 + },
524 + {
525 + "id": "5e615e3edb5999a0",
526 + "type": "ui_group",
527 + "name": "EXTI_Trigger",
528 + "tab": "abb98f80600a5448",
529 + "order": 5,
530 + "disp": true,
531 + "width": "6",
532 + "collapse": false,
533 + "className": ""
534 + },
535 + {
536 + "id": "5f7fec85295a7f7c",
537 + "type": "ui_group",
538 + "name": "TempC_SHT",
539 + "tab": "abb98f80600a5448",
540 + "order": 6,
541 + "disp": true,
542 + "width": "6",
543 + "collapse": false,
544 + "className": ""
545 + },
546 + {
547 + "id": "3cb616f18674c42a",
548 + "type": "ui_group",
549 + "name": "Work_mode",
550 + "tab": "abb98f80600a5448",
551 + "order": 7,
552 + "disp": true,
553 + "width": "6",
554 + "collapse": false,
555 + "className": ""
556 + },
557 + {
558 + "id": "bb2e35e7a931c198",
559 + "type": "ui_group",
560 + "name": "Hum_SHT",
561 + "tab": "abb98f80600a5448",
562 + "order": 8,
563 + "disp": true,
564 + "width": "6",
565 + "collapse": false,
566 + "className": ""
567 + },
568 + {
569 + "id": "9109ae41eee353df",
570 + "type": "ui_group",
571 + "name": "Door_status",
572 + "tab": "abb98f80600a5448",
573 + "order": 9,
574 + "disp": true,
575 + "width": "6",
576 + "collapse": false,
577 + "className": ""
578 + },
579 + {
580 + "id": "abb98f80600a5448",
581 + "type": "ui_tab",
582 + "name": "LSN50v2 S31",
583 + "icon": "LSN50v2 S31",
584 + "disabled": false,
585 + "hidden": false
586 + }
587 +]
image-20230620103153-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +127.6 KB
Content
image-20230620103535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +156.3 KB
Content
image-20230620103923-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +72.7 KB
Content
image-20231014092843-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +596 bytes
Content
image-20231014092934-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +620 bytes
Content
image-20231014092954-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +618 bytes
Content
image-20231014092959-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +563 bytes
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0