Last modified by Kilight Cao on 2024/03/04 09:10
<
From version < 132.4 >
edited by Xiaoling
on 2023/05/29 11:47
To version < 148.2 >
edited by Xiaoling
on 2023/12/15 10:28
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -7,7 +7,7 @@
7 7  
8 8  )))
9 9  
10 -**Table of Contents：**
10 +**Table of Contents:**
11 11  
12 12  {{toc/}}
13 13  
... ... @@ -25,7 +25,9 @@
25 25  (((
26 26  The LG01v2 is an (% style="color:blue" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  
28 -LG01v2 is specially design for (% style="color:blue" %)**peer to peer LoRa**(%%) protocol instead of LoRaWAN protocol. The LG01v2 use single channel LoRa module to minimize the deployment cost for a private p2p LoRa wireless network.
28 +LG01v2 is specially designed for (% style="color:blue" %)**peer-to-peer LoRa**(%%) protocol instead of LoRaWAN protocol. The LG01v2 uses a single-channel LoRa module to minimize the deployment cost for a private p2p LoRa wireless network.
29 +
30 +(% style="color:red" %)**Note: The LG01v2 can't register and connect to the LoRaWAN server(Such as The Things NetWork, AWS, or Chirpstack..)**
29 29  )))
30 30  
31 31  (((
... ... @@ -55,8 +55,6 @@
55 55  * Storage Temperature: -20 ~~ 65°C
56 56  * Power Input: 5V, 2A, DC
57 57  
58 -
59 -
60 60  == 1.3 Features ==
61 61  
62 62  
... ... @@ -67,8 +67,6 @@
67 67  * LoRa Gateway
68 68  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
69 69  
70 -
71 -
72 72  == 1.4 Block Diagram ==
73 73  
74 74  
... ... @@ -79,21 +79,15 @@
79 79  LG01-V2 has totally four LEDs, They are:
80 80  
81 81  
82 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
80 +(% style="color:blue" %)**➢ Power LED**[[image:image-20231014092959-4.png]](%%): This RED LED will be solid if the device is properly powered
83 83  
84 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
82 +(% style="color:blue" %)**➢ ETH LED**[[image:image-20231014092934-2.png]](%%):  This RGB LED will blink GREEN when the ETH port is connecting
85 85  
86 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
84 +(% style="color:blue" %)**➢ SYS LED**[[image:image-20231014092954-3.png]](%%):  Undefined yet. 
87 87  
88 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
86 +(% style="color:blue" %)**➢ WIFI LED**[[image:image-20231014092843-1.png]](%%): This LED shows the WIFI interface connection status.
89 89  
90 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
91 91  
92 - ✓** SOLID RED:** Device doesn't have an Internet connection.
93 -
94 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
95 -
96 -
97 97  == 1.6 Button Intruction ==
98 98  
99 99  
... ... @@ -118,9 +118,9 @@
118 118  In most cases, the first thing you need to do is make the LG01-v2 accessible to the network.
119 119  
120 120  
121 -== 2.1 Connects to the network and accesses the gateway Web UI ==
113 +== 2.1 Access and Configure LG01-v2 ==
122 122  
123 -=== 2.1.1 connect the network. ===
115 +=== 2.1.1 Find IP address of LG01-v2 ===
124 124  
125 125  
126 126  ==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
... ... @@ -380,8 +380,6 @@
380 380  * **LA66 Shield + UNO + DHT11**: The UNO will get the temperature and humidity and broadcast the value via LoRa protocol.
381 381  * **LG01v2** : LG01v2 is set to listening the LoRa Channel which LA66 is broadcasting. When LG01v2 get the data from LA66, LG01v2 will plot the data in built-in IoT server.
382 382  
383 -
384 -
385 385  === 5.2.2 Set Up LA66 Shield + UNO ===
386 386  
387 387  
... ... @@ -523,48 +523,16 @@
523 523  [[image:image-20221108180458-11.png||height="402" width="1137"]]
524 524  
525 525  
526 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)6. How users can access LG01(%%)v(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%) =
527 527  
517 += 6. OTA System Update =
528 528  
529 -(% style="color:blue" %)**USB TTL to LG01v2  Connection:**
530 530  
531 -
532 -Port 1 of the UART on the LG01v2 is GND
533 -
534 -(% class="box infomessage" %)
535 -(((
536 -**TXD  <~-~--> UART RXD (Gray line)**
537 -
538 -**RXD  <~-~--> UART TXD (White line)**
539 -
540 -**GND <~-~--> GND (Black line)**
541 -)))
542 -
543 -
544 -**LG01v2 UART connection photo**
545 -
546 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
547 -
548 -
549 -
550 -In the PC, you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LG01v2. LG01v2 will output system info once power on as below:
551 -
552 -
553 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
554 -
555 -
556 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
557 -
558 -
559 -= 7. OTA System Update =
560 -
561 -
562 562  LG01v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
563 563  
564 564  
565 -= 8. FAQ =
523 += 7. FAQ =
566 566  
567 -== 8.1 How does LG01v2 communicate with Lora shield (LoRa.h) ==
525 +== 7.1 How does LG01v2 communicate with Lora shield (LoRa.h) ==
568 568  
569 569  
570 570  This example describes how to use LG01v2, LoRa Shield to set up a LoRa network,
... ... @@ -613,7 +613,7 @@
613 613  [[image:image-20221101162527-4.png]]
614 614  
615 615  
616 -== 8.2 How does LG01v2 communicate with Heltec LoRa Node ==
574 +== 7.2 How does LG01v2 communicate with Heltec LoRa Node ==
617 617  
618 618  
619 619  This example describes how to use LG01v2 and Heltec LoRa Node to set up a LoRa network,
... ... @@ -654,11 +654,79 @@
654 654  [[image:image-20221112163119-4.png||height="808" width="560"]]
655 655  
656 656  
657 -= 9. Trouble Shooting =
615 +== 7.3 How does LG01v2 communicate with LoRaWAN node ==
658 658  
659 -== 9.1  Fallback IP does not work, how can users check ==
660 660  
618 +This example describes how to use LG01v2 and LSN50 to set up a  network,
661 661  
620 +In this case, users need to set LSN50 to work in ABP mode and transmit in only one frequency.
621 +
622 +Assume we have a LG01v2 working in the frequency 868100000 now, below is the steps.
623 +
624 +
625 +**Step1: **Configure the LG01v2
626 +
627 +(% class="box infomessage" %)
628 +(((
629 +AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
630 +AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
631 +AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
632 +AT+SYNCWORD=1  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
633 +)))
634 +
635 +**Step2:  **Run AT commands to make the LSN50 work in Single frequency and ABP mode. Below are the AT commands:
636 +
637 +(% class="box infomessage" %)
638 +(((
639 +AT+FDR  ~-~--> Reset Parameters to Factory Default, Keys Reserve
640 +AT+NJM=0  ~-~-->  Set to ABP mode
641 +AT+ADR=0  ~-~-->  Set the Adaptive Data Rate Off
642 +AT+DR=0  ~-~--> Set Data Rate (Set AT+DR=3 for 915 band)
643 +AT+TDC=300000  ~-~-->  Set transmit interval to 5 minutes
644 +AT+CHS=868100000  ~-~--> Set transmit frequency to 868.1Mhz
645 +AT+DADDR=FFFFF111  ~-~--> Set Device Address to 26 01 1A F1
646 +ATZ  ~-~--> Reset MCU
647 +)))
648 +
649 +**Step3:  **Check result
650 +
651 +
652 +
653 +User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
654 +
655 +User can import this example in Node-Red: [[attach:LG01v2_LSN50v2_S31.json||target="_blank"]]
656 +
657 +
658 +First the user needs to fill in the NwkSkey and AppSkey in the LoraWan Packet Decrypter node.
659 +
660 +[[image:image-20230620103535-2.png||height="591" width="1138"]]
661 +
662 +[[image:image-20230620103153-1.png||height="610" width="1141"]]
663 +
664 +
665 +The data will be displayed in the built-in node-red UI
666 +
667 +**Browser input: (% style="background-color:yellow" %)__//http:~/~/<local-IPV4-address>//__(%%)**
668 +
669 +[[image:image-20230620103923-3.png||height="476" width="1138"]]
670 +
671 +
672 +== 7.4 How can users factory reset LG01v2 ==
673 +
674 +
675 +Users can download the image of LG01v2 from this link：[[dragino-lg01v2-1.7-0210>>https://www.dropbox.com/scl/fi/g0si61lcrvdjyto4ma951/dragino-lg01v2-1.7-0210.zip?rlkey=t03oqo493r2p7ign488rs2jsv&dl=0]]
676 +
677 +
678 +Then follow the steps in the link below to restore factory Settings to LG01v2：
679 +
680 +[[How to flash a new image(OS) to the gateway>>url:https://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
681 +
682 +
683 += 8. Trouble Shooting =
684 +
685 +== 8.1  Fallback IP does not work, how can users check ==
686 +
687 +
662 662  When the computer has completed the above fallback IP configuration,the LG01v2 Web UI is still not accessible via fallback IP.
663 663  
664 664  
... ... @@ -678,7 +678,7 @@
678 678  If the firewall is not down, this will affect access to the gateway.
679 679  
680 680  
681 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
707 += (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
682 682  
683 683  
684 684  (((
... ... @@ -689,16 +689,17 @@
689 689  With your question as detailed as possible. We will reply and help you in the shortest.
690 690  
691 691  
692 -= 11. Reference =
718 += 10. Reference =
693 693  
694 694  
695 695  * Install Tago Core: Refer **Install Tago Core in LG01v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
722 +
696 696  * [[Advance OS Reference Guide for L>>doc:Main.Armbian OS instruction.WebHome]]G01v2.
697 697  
698 698  
699 699  )))
700 700  
701 -= 12. Order Info =
728 += 11. Order Info =
702 702  
703 703  
704 704  (% style="color:#0000ff" %)**LG01v2-XXX-YYY**
... ... @@ -710,15 +710,15 @@
710 710  
711 711  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
712 712  
713 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
714 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
715 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
716 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
740 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
741 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America: Verizon, AT&T(FirstNet), U.S.Cellular; Canada: Telus
742 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
743 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
717 717  
718 718  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
719 719  
720 720  
721 -= 13. Manufacturer Info =
748 += 12. Manufacturer Info =
722 722  
723 723  
724 724  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -728,7 +728,7 @@
728 728  LongCheng Street, LongGang District ; Shenzhen 518116,China
729 729  
730 730  
731 -= 14. FCC Warning =
758 += 13. FCC Warning =
732 732  
733 733  
734 734  (((
LG01v2_LSN50v2_S31.json
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +16.5 KB
Content
... ... @@ -1,0 +1,587 @@
1 +[
2 + {
3 + "id": "5e07f5eeeb2a969b",
4 + "type": "tab",
5 + "label": "流程 1",
6 + "disabled": false,
7 + "info": "",
8 + "env": []
9 + },
10 + {
11 + "id": "9c26fa2f19e2b556",
12 + "type": "function",
13 + "z": "5e07f5eeeb2a969b",
14 + "name": "hex to base64",
15 + "func": "var input = msg.payload;\nvar base64 = Buffer.from(input, 'hex').toString('base64');\nmsg.payload = base64;\nreturn msg;",
16 + "outputs": 1,
17 + "noerr": 0,
18 + "initialize": "",
19 + "finalize": "",
20 + "libs": [],
21 + "x": 220,
22 + "y": 160,
23 + "wires": [
24 + [
25 + "075bc9172a4c6570",
26 + "3601a98894805fbe"
27 + ]
28 + ]
29 + },
30 + {
31 + "id": "ee0480c81e66d657",
32 + "type": "function",
33 + "z": "5e07f5eeeb2a969b",
34 + "name": "function 4",
35 + "func": "var bytes = msg.payload[\"uplink_message\"]\nvar data = msg.payload[\"out\"]\nvar mode = (parseInt(data.substring(12, 14), 16) & 0x7C) >> 2;\nif (mode != 2)\n{\nvar bat = (parseInt(data.substring(0,4),16)&0x3FFF)/1000;\nvar TempC1 = (parseFloat(parseInt(data.substring(4, 8),16)/10).toFixed(2));\nvar ADC_CH0V = (parseInt(data.substring(8, 12), 16) ) / 1000;\nvar Digital_IStatus = (parseInt((data.substring(8, 12),16) & 0x02))?\"H\":\"L\"; \n\nif (mode != 6) {\n\n var EXTI_Trigger = ((parseInt(data.substring(12, 14), 16) & 0x01))? \"TRUE\" : \"FALSE\";\n\n var Door_status = ((parseInt(data.substring(12, 14), 16) & 0x80))? \"CLOSE\" : \"OPEN\";\n\n}\n}\nif (mode == 0) {\n\n var Work_mode = \"IIC\";\n\n if ((parseInt(data.substring(18, 22), 16)) == 0){\n\n var Illum = (parseInt(data.substring(8, 12), 16));\n\n }\n\n else {\n\n var TempC_SHT = parseFloat(((parseInt(data.substring(14, 18), 16)) / 10).toFixed(2));\n\n var Hum_SHT = parseFloat((((parseInt(data.substring(18, 22), 16))) / 10).toFixed(1));\n\n }\n \n}\n\nelse if (mode == 1) {\n\n var Work_mode = \" Distance\";\n\n var Distance_cm = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(1));\n\n if (((parseInt(data.substring(18, 22), 16))) != 65535){\n\n var Distance_signal_strength = parseFloat(((parseInt(data.substring(18, 22), 16))).toFixed(0));\n\n }\n\n}\n\nelse if (mode == 2) {\n\n var Work_mode = \" 3ADC\";\n\n var BatV = (parseInt(data.substring(18, 22), 16)) / 10;\n\n var ADC_CH0V = ((parseInt(data.substring(0, 4), 16))) / 1000;\n\n var ADC_CH1V = ((parseInt(data.substring(4, 8), 16))) / 1000;\n\n var ADC_CH4V = ((parseInt(data.substring(8, 12), 16))) / 1000;\n\n var Digital_IStatus = ((parseInt(data.substring(12, 14), 16)) & 0x02) ? \"H\" : \"L\";\n\n var EXTI_Trigger = ((parseInt(data.substring(12, 14), 16)) & 0x01) ? \"TRUE\" : \"FALSE\";\n\n var Door_status = ((parseInt(data.substring(13, 14), 16)) & 0x80) ? \"CLOSE\" : \"OPEN\";\n\n if ((parseInt(data.substring(18, 22), 16) === 0)) {\n\n var Illum = ((parseInt(data.substring(14, 18), 16)));\n\n }\n\n else {\n\n var TempC_SHT = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(2));\n\n var Hum_SHT = parseFloat((((parseInt(data.substring(18, 24), 16))) / 10).toFixed(1));\n\n }\n\n}\n\nelse if (mode == 3) {\n\n var Work_mode = \"3DS18B20\";\n\n var TempC2 = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(2));\n\n var TempC3 = parseFloat((((parseInt(data.substring(18, 24), 16))) / 10).toFixed(1));\n\n\n\n}\n\nelse if (mode == 4) {\n\n var Work_mode = \"Weight\";\n\n var Weight = ((parseInt(data.substring(14, 18), 16)));\n\n}\n\nelse if (mode == 5) {\n\n var Work_mode = \"Count\";\n\n var Count = ((parseInt(data.substring(14, 22), 16)));\n\n}\n\n\n\nvar b = { payload: bat }, c = { payload: TempC1 }, d = { payload: ADC_CH0V }, e = { payload: Digital_IStatus }, f = { payload: EXTI_Trigger }, g = { payload: Door_status }, j = { payload: TempC_SHT }, s = { payload: Hum_SHT }, k = { payload: Work_mode };\nreturn [b,c,d,e,f,g,j,k,s];",
36 + "outputs": 9,
37 + "noerr": 0,
38 + "initialize": "",
39 + "finalize": "",
40 + "libs": [],
41 + "x": 660,
42 + "y": 300,
43 + "wires": [
44 + [
45 + "fd22b92d2b8de0fb"
46 + ],
47 + [
48 + "3307256a4e1ea53a"
49 + ],
50 + [
51 + "a3fd8302ec399e31"
52 + ],
53 + [
54 + "c7d1f63ff5f0026a"
55 + ],
56 + [
57 + "159967056da52706"
58 + ],
59 + [
60 + "a21581a41adc1714"
61 + ],
62 + [
63 + "7bb78b78445ac9e3"
64 + ],
65 + [
66 + "0364752170ed6228"
67 + ],
68 + [
69 + "65293155d71d54b9"
70 + ]
71 + ]
72 + },
73 + {
74 + "id": "e763b293d42dbdd5",
75 + "type": "change",
76 + "z": "5e07f5eeeb2a969b",
77 + "name": "",
78 + "rules": [
79 + {
80 + "t": "change",
81 + "p": "payload",
82 + "pt": "msg",
83 + "from": "Data: (HEX:)",
84 + "fromt": "str",
85 + "to": "",
86 + "tot": "str"
87 + },
88 + {
89 + "t": "change",
90 + "p": "payload",
91 + "pt": "msg",
92 + "from": " ",
93 + "fromt": "str",
94 + "to": "",
95 + "tot": "str"
96 + }
97 + ],
98 + "action": "",
99 + "property": "",
100 + "from": "",
101 + "to": "",
102 + "reg": false,
103 + "x": 420,
104 + "y": 60,
105 + "wires": [
106 + [
107 + "9c26fa2f19e2b556",
108 + "416a930e89291528"
109 + ]
110 + ]
111 + },
112 + {
113 + "id": "075bc9172a4c6570",
114 + "type": "lorawan-packet-decrypt-nwkey-appkey",
115 + "z": "5e07f5eeeb2a969b",
116 + "name": "FFFFF111",
117 + "nsw": "CCFFFFFFFFFFFFFFFFFFFFFFFFFFFFAA",
118 + "asw": "FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCC",
119 + "x": 510,
120 + "y": 160,
121 + "wires": [
122 + [
123 + "ee0480c81e66d657"
124 + ]
125 + ]
126 + },
127 + {
128 + "id": "13dc77a4e2bb4f72",
129 + "type": "serial in",
130 + "z": "5e07f5eeeb2a969b",
131 + "name": "",
132 + "serial": "bb1c0e81fd51fa9e",
133 + "x": 190,
134 + "y": 60,
135 + "wires": [
136 + [
137 + "e763b293d42dbdd5"
138 + ]
139 + ]
140 + },
141 + {
142 + "id": "3307256a4e1ea53a",
143 + "type": "ui_chart",
144 + "z": "5e07f5eeeb2a969b",
145 + "name": "",
146 + "group": "c1fddd37879528e5",
147 + "order": 1,
148 + "width": 0,
149 + "height": 0,
150 + "label": "TempC1",
151 + "chartType": "line",
152 + "legend": "false",
153 + "xformat": "HH:mm:ss",
154 + "interpolate": "linear",
155 + "nodata": "",
156 + "dot": false,
157 + "ymin": "",
158 + "ymax": "",
159 + "removeOlder": 1,
160 + "removeOlderPoints": "",
161 + "removeOlderUnit": "3600",
162 + "cutout": 0,
163 + "useOneColor": false,
164 + "useUTC": false,
165 + "colors": [
166 + "#1f77b4",
167 + "#aec7e8",
168 + "#ff7f0e",
169 + "#2ca02c",
170 + "#98df8a",
171 + "#d62728",
172 + "#ff9896",
173 + "#9467bd",
174 + "#c5b0d5"
175 + ],
176 + "outputs": 1,
177 + "useDifferentColor": false,
178 + "className": "",
179 + "x": 940,
180 + "y": 160,
181 + "wires": [
182 + []
183 + ]
184 + },
185 + {
186 + "id": "a3fd8302ec399e31",
187 + "type": "ui_chart",
188 + "z": "5e07f5eeeb2a969b",
189 + "name": "",
190 + "group": "6d46fdae9f413f7b",
191 + "order": 1,
192 + "width": 0,
193 + "height": 0,
194 + "label": "ADC_CH0V",
195 + "chartType": "line",
196 + "legend": "false",
197 + "xformat": "HH:mm:ss",
198 + "interpolate": "linear",
199 + "nodata": "",
200 + "dot": false,
201 + "ymin": "",
202 + "ymax": "",
203 + "removeOlder": 1,
204 + "removeOlderPoints": "",
205 + "removeOlderUnit": "3600",
206 + "cutout": 0,
207 + "useOneColor": false,
208 + "useUTC": false,
209 + "colors": [
210 + "#1f77b4",
211 + "#aec7e8",
212 + "#ff7f0e",
213 + "#2ca02c",
214 + "#98df8a",
215 + "#d62728",
216 + "#ff9896",
217 + "#9467bd",
218 + "#c5b0d5"
219 + ],
220 + "outputs": 1,
221 + "useDifferentColor": false,
222 + "className": "",
223 + "x": 950,
224 + "y": 200,
225 + "wires": [
226 + []
227 + ]
228 + },
229 + {
230 + "id": "fd22b92d2b8de0fb",
231 + "type": "ui_chart",
232 + "z": "5e07f5eeeb2a969b",
233 + "name": "",
234 + "group": "bb5657c2a8c290a3",
235 + "order": 1,
236 + "width": 0,
237 + "height": 0,
238 + "label": "BatV",
239 + "chartType": "line",
240 + "legend": "false",
241 + "xformat": "HH:mm:ss",
242 + "interpolate": "linear",
243 + "nodata": "",
244 + "dot": false,
245 + "ymin": "",
246 + "ymax": "",
247 + "removeOlder": 1,
248 + "removeOlderPoints": "",
249 + "removeOlderUnit": "3600",
250 + "cutout": 0,
251 + "useOneColor": false,
252 + "useUTC": false,
253 + "colors": [
254 + "#1f77b4",
255 + "#aec7e8",
256 + "#ff7f0e",
257 + "#2ca02c",
258 + "#98df8a",
259 + "#d62728",
260 + "#ff9896",
261 + "#9467bd",
262 + "#c5b0d5"
263 + ],
264 + "outputs": 1,
265 + "useDifferentColor": false,
266 + "className": "",
267 + "x": 930,
268 + "y": 120,
269 + "wires": [
270 + []
271 + ]
272 + },
273 + {
274 + "id": "c7d1f63ff5f0026a",
275 + "type": "ui_text",
276 + "z": "5e07f5eeeb2a969b",
277 + "group": "528e965cef294158",
278 + "order": 0,
279 + "width": "6",
280 + "height": "4",
281 + "name": "",
282 + "label": "Digital_IStatus",
283 + "format": "{{msg.payload}}",
284 + "layout": "col-center",
285 + "className": "",
286 + "x": 960,
287 + "y": 240,
288 + "wires": []
289 + },
290 + {
291 + "id": "159967056da52706",
292 + "type": "ui_text",
293 + "z": "5e07f5eeeb2a969b",
294 + "group": "5e615e3edb5999a0",
295 + "order": 0,
296 + "width": "6",
297 + "height": "4",
298 + "name": "",
299 + "label": "EXTI_Trigger",
300 + "format": "{{msg.payload}}",
301 + "layout": "col-center",
302 + "className": "",
303 + "x": 950,
304 + "y": 280,
305 + "wires": []
306 + },
307 + {
308 + "id": "7bb78b78445ac9e3",
309 + "type": "ui_chart",
310 + "z": "5e07f5eeeb2a969b",
311 + "name": "",
312 + "group": "5f7fec85295a7f7c",
313 + "order": 0,
314 + "width": 0,
315 + "height": 0,
316 + "label": "TempC_SHT",
317 + "chartType": "line",
318 + "legend": "false",
319 + "xformat": "HH:mm:ss",
320 + "interpolate": "linear",
321 + "nodata": "",
322 + "dot": false,
323 + "ymin": "",
324 + "ymax": "",
325 + "removeOlder": 1,
326 + "removeOlderPoints": "",
327 + "removeOlderUnit": "3600",
328 + "cutout": 0,
329 + "useOneColor": false,
330 + "useUTC": false,
331 + "colors": [
332 + "#1f77b4",
333 + "#aec7e8",
334 + "#ff7f0e",
335 + "#2ca02c",
336 + "#98df8a",
337 + "#d62728",
338 + "#ff9896",
339 + "#9467bd",
340 + "#c5b0d5"
341 + ],
342 + "outputs": 1,
343 + "useDifferentColor": false,
344 + "className": "",
345 + "x": 950,
346 + "y": 360,
347 + "wires": [
348 + []
349 + ]
350 + },
351 + {
352 + "id": "0364752170ed6228",
353 + "type": "ui_text",
354 + "z": "5e07f5eeeb2a969b",
355 + "group": "3cb616f18674c42a",
356 + "order": 0,
357 + "width": "6",
358 + "height": "4",
359 + "name": "",
360 + "label": "Work_mode",
361 + "format": "{{msg.payload}}",
362 + "layout": "col-center",
363 + "className": "",
364 + "x": 950,
365 + "y": 400,
366 + "wires": []
367 + },
368 + {
369 + "id": "65293155d71d54b9",
370 + "type": "ui_chart",
371 + "z": "5e07f5eeeb2a969b",
372 + "name": "",
373 + "group": "bb2e35e7a931c198",
374 + "order": 0,
375 + "width": 0,
376 + "height": 0,
377 + "label": "Hum_SHT",
378 + "chartType": "line",
379 + "legend": "false",
380 + "xformat": "HH:mm:ss",
381 + "interpolate": "linear",
382 + "nodata": "",
383 + "dot": false,
384 + "ymin": "",
385 + "ymax": "",
386 + "removeOlder": 1,
387 + "removeOlderPoints": "",
388 + "removeOlderUnit": "3600",
389 + "cutout": 0,
390 + "useOneColor": false,
391 + "useUTC": false,
392 + "colors": [
393 + "#1f77b4",
394 + "#aec7e8",
395 + "#ff7f0e",
396 + "#2ca02c",
397 + "#98df8a",
398 + "#d62728",
399 + "#ff9896",
400 + "#9467bd",
401 + "#c5b0d5"
402 + ],
403 + "outputs": 1,
404 + "useDifferentColor": false,
405 + "className": "",
406 + "x": 950,
407 + "y": 440,
408 + "wires": [
409 + []
410 + ]
411 + },
412 + {
413 + "id": "a21581a41adc1714",
414 + "type": "ui_text",
415 + "z": "5e07f5eeeb2a969b",
416 + "group": "9109ae41eee353df",
417 + "order": 0,
418 + "width": "6",
419 + "height": "4",
420 + "name": "",
421 + "label": "Door_status",
422 + "format": "{{msg.payload}}",
423 + "layout": "col-center",
424 + "className": "",
425 + "x": 950,
426 + "y": 320,
427 + "wires": []
428 + },
429 + {
430 + "id": "416a930e89291528",
431 + "type": "debug",
432 + "z": "5e07f5eeeb2a969b",
433 + "name": "debug 2",
434 + "active": true,
435 + "tosidebar": true,
436 + "console": false,
437 + "tostatus": false,
438 + "complete": "false",
439 + "statusVal": "",
440 + "statusType": "auto",
441 + "x": 660,
442 + "y": 60,
443 + "wires": []
444 + },
445 + {
446 + "id": "3601a98894805fbe",
447 + "type": "debug",
448 + "z": "5e07f5eeeb2a969b",
449 + "name": "debug 3",
450 + "active": true,
451 + "tosidebar": true,
452 + "console": false,
453 + "tostatus": false,
454 + "complete": "false",
455 + "statusVal": "",
456 + "statusType": "auto",
457 + "x": 380,
458 + "y": 240,
459 + "wires": []
460 + },
461 + {
462 + "id": "bb1c0e81fd51fa9e",
463 + "type": "serial-port",
464 + "serialport": "/dev/ttyUSB0",
465 + "serialbaud": "9600",
466 + "databits": "8",
467 + "parity": "none",
468 + "stopbits": "1",
469 + "waitfor": "",
470 + "dtr": "none",
471 + "rts": "none",
472 + "cts": "none",
473 + "dsr": "none",
474 + "newline": "\\n",
475 + "bin": "false",
476 + "out": "char",
477 + "addchar": "\\r\\n",
478 + "responsetimeout": "10000"
479 + },
480 + {
481 + "id": "c1fddd37879528e5",
482 + "type": "ui_group",
483 + "name": "BatV",
484 + "tab": "abb98f80600a5448",
485 + "order": 1,
486 + "disp": true,
487 + "width": "6",
488 + "collapse": false,
489 + "className": ""
490 + },
491 + {
492 + "id": "6d46fdae9f413f7b",
493 + "type": "ui_group",
494 + "name": "ADC_CH0V",
495 + "tab": "abb98f80600a5448",
496 + "order": 1,
497 + "disp": true,
498 + "width": "6",
499 + "collapse": false,
500 + "className": ""
501 + },
502 + {
503 + "id": "bb5657c2a8c290a3",
504 + "type": "ui_group",
505 + "name": "BatV",
506 + "tab": "abb98f80600a5448",
507 + "order": 3,
508 + "disp": true,
509 + "width": "6",
510 + "collapse": false,
511 + "className": ""
512 + },
513 + {
514 + "id": "528e965cef294158",
515 + "type": "ui_group",
516 + "name": "Digital_IStatus",
517 + "tab": "abb98f80600a5448",
518 + "order": 4,
519 + "disp": true,
520 + "width": "6",
521 + "collapse": false,
522 + "className": ""
523 + },
524 + {
525 + "id": "5e615e3edb5999a0",
526 + "type": "ui_group",
527 + "name": "EXTI_Trigger",
528 + "tab": "abb98f80600a5448",
529 + "order": 5,
530 + "disp": true,
531 + "width": "6",
532 + "collapse": false,
533 + "className": ""
534 + },
535 + {
536 + "id": "5f7fec85295a7f7c",
537 + "type": "ui_group",
538 + "name": "TempC_SHT",
539 + "tab": "abb98f80600a5448",
540 + "order": 6,
541 + "disp": true,
542 + "width": "6",
543 + "collapse": false,
544 + "className": ""
545 + },
546 + {
547 + "id": "3cb616f18674c42a",
548 + "type": "ui_group",
549 + "name": "Work_mode",
550 + "tab": "abb98f80600a5448",
551 + "order": 7,
552 + "disp": true,
553 + "width": "6",
554 + "collapse": false,
555 + "className": ""
556 + },
557 + {
558 + "id": "bb2e35e7a931c198",
559 + "type": "ui_group",
560 + "name": "Hum_SHT",
561 + "tab": "abb98f80600a5448",
562 + "order": 8,
563 + "disp": true,
564 + "width": "6",
565 + "collapse": false,
566 + "className": ""
567 + },
568 + {
569 + "id": "9109ae41eee353df",
570 + "type": "ui_group",
571 + "name": "Door_status",
572 + "tab": "abb98f80600a5448",
573 + "order": 9,
574 + "disp": true,
575 + "width": "6",
576 + "collapse": false,
577 + "className": ""
578 + },
579 + {
580 + "id": "abb98f80600a5448",
581 + "type": "ui_tab",
582 + "name": "LSN50v2 S31",
583 + "icon": "LSN50v2 S31",
584 + "disabled": false,
585 + "hidden": false
586 + }
587 +]
image-20230620103153-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +127.6 KB
Content
image-20230620103535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +156.3 KB
Content
image-20230620103923-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +72.7 KB
Content
image-20231014092843-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +596 bytes
Content
image-20231014092934-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +620 bytes
Content
image-20231014092954-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +618 bytes
Content
image-20231014092959-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +563 bytes
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0