Summary

• Page properties (1 modified, 0 added, 0 removed)
• Attachments (0 modified, 17 added, 0 removed)
  • LG01v2_LSN50v2_S31.json
  • image-20230506110646-1.png
  • image-20230506113332-2.png
  • image-20230506113432-3.png
  • image-20230506113531-4.png
  • image-20230506113602-5.png
  • image-20230506113623-6.png
  • image-20230506113705-7.png
  • image-20230506113722-8.png
  • image-20230506113737-9.png
  • image-20230506113813-10.png
  • image-20230506113831-11.png
  • image-20230506114127-12.png
  • image-20230506115438-13.png
  • image-20230620103153-1.png
  • image-20230620103535-2.png
  • image-20230620103923-3.png

Details

Page properties

Content

...	...	@@ -16,26 +16,26 @@
16	16
17	17
18	18
19		-= **1. Introduction** =
	19	+= 1. Introduction =
20	20
21		-== **1.1 What is LG01v2** ==
	21	+== 1.1 What is LG01v2 ==
22	22
23	23
24	24	(((
25	25	(((
26		-The LG01v2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
	26	+The LG01v2 is an (% style="color:blue" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27	27
28		-LG01v2 is specially design for (% style="color:green" %)**peer to peer LoRa**(%%) protocol instead of LoRaWAN protocol. The LG01v2 use single channel LoRa module to minimize the deployment cost for a private p2p LoRa wireless network.
	28	+LG01v2 is specially design for (% style="color:blue" %)**peer to peer LoRa**(%%) protocol instead of LoRaWAN protocol. The LG01v2 use single channel LoRa module to minimize the deployment cost for a private p2p LoRa wireless network.
29	29	)))
30	30
31	31	(((
32		-LG01v2 uses Open Source Linux system. User can modify the Linux part and develop customize software base on it. It has (% style="color:green" %)**1.2Ghz Quad-Core CPU**(%%) , (% style="color:green" %)**4GB eMMC storage**(%%) and (% style="color:green" %)**512MB RAM**(%%) for most application.
	32	+LG01v2 uses Open Source Linux system. User can modify the Linux part and develop customize software base on it. It has (% style="color:blue" %)**1.2Ghz Quad-Core CPU**(%%) , (% style="color:blue" %)**4GB eMMC storage**(%%) and (% style="color:blue" %)**512MB RAM**(%%) for most application.
33	33
34		-LG01v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
	34	+LG01v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
35	35	)))
36	36
37	37
38		-== **1.2 Specifications** ==
	38	+== 1.2 Specifications ==
39	39
40	40
41	41	(% style="color:#037691" %)**Hardware System:**
...	...	@@ -55,7 +55,7 @@
55	55	* Storage Temperature: -20 ~~ 65°C
56	56	* Power Input: 5V, 2A, DC
57	57
58		-== **1.3 Features** ==
	58	+== 1.3 Features ==
59	59
60	60
61	61	* Open Source Debian system
...	...	@@ -65,48 +65,48 @@
65	65	* LoRa Gateway
66	66	* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
67	67
68		-== **1.4 Block Diagram** ==
	68	+== 1.4 Block Diagram ==
69	69
70	70
71	71
72		-== **1.5 LED Indicators** ==
	72	+== 1.5 LED Indicators ==
73	73
74	74
75	75	LG01-V2 has totally four LEDs, They are:
76	76
77	77
78		-(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
	78	+(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
79	79
80		-(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
	80	+(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
81	81
82		-(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
	82	+(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
83	83
84		-// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
	84	+ ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
85	85
86		-// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
	86	+ ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
87	87
88		-// ✓** SOLID RED:** Device doesn't have an Internet connection.//
	88	+ ✓** SOLID RED:** Device doesn't have an Internet connection.
89	89
90		-(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
	90	+(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
91	91
92	92
93		-== **1.6 Button Intruction** ==
	93	+== 1.6 Button Intruction ==
94	94
95	95
96	96	LG01-V2 has a black toggle button, which is:
97	97
98	98
99		-(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
	99	+(% style="color:blue" %)**➢ Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
100	100
101		- // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
	101	+ **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
102	102
103	103
104		-(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
	104	+(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
105	105
106		- //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
	106	+ **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
107	107
108	108
109		-= **2. Quick Start** =
	109	+= 2. Quick Start =
110	110
111	111
112	112	The LG01-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
...	...	@@ -114,9 +114,9 @@
114	114	In most cases, the first thing you need to do is make the LG01-v2 accessible to the network.
115	115
116	116
117		-== **2.1 Connects to the network and accesses the gateway Web UI** ==
	117	+== 2.1 Access and Configure LG01-v2 ==
118	118
119		-=== **2.1.1 connect the network.** ===
	119	+=== 2.1.1 Find IP address of LG01-v2 ===
120	120
121	121
122	122	==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
...	...	@@ -140,8 +140,9 @@
140	140
141	141	2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
142	142
143		-Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
	143	+**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
144	144
	145	+
145	145	As in the below photo:
146	146
147	147	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413172038-1.png?width=1243&height=732&rev=1.1||alt="image-20230413172038-1.png" height="624" width="1059"]]
...	...	@@ -149,11 +149,11 @@
149	149
150	150	Configure computer Ethernet port steps video: **[[fallback ip.mp4>>url:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/fallback%20ip.mp4?rev=1.1]]**
151	151
152		-If you still can't access the LG01v2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
	153	+If you still can't access the LG01v2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/LG01v2/#H10.1A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
153	153
154	154	3. In the PC, use IP address 172.31.255.254 to access the LG01v2 via Web or Console.
155	155
156		-[[image:image-20230504095502-2.png||height="545" width="1065"]]
	157	+[[image:image-20230506115438-13.png||height="554" width="1047"]]
157	157
158	158
159	159
...	...	@@ -166,25 +166,26 @@
166	166	Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
167	167
168	168
169		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102702-6.png?rev=1.1||alt="image-20220622102702-6.png"]]
	170	+[[image:image-20230506113332-2.png]]
170	170
171	171
172	172	**Wi-Fi configuration successful**
173	173
174	174
175		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102847-7.png?rev=1.1||alt="image-20220622102847-7.png"]]
	176	+[[image:image-20230506113432-3.png||height="397" width="855"]]
176	176
177	177
178	178	=== 2.1.2 Access Configure Web UI ===
179	179
	181	+
180	180	**Web Interface**
181	181
182		-Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
	184	+Open a browser on the PC and type the LG01v2 ip address (depends on your connect method)
183	183
184	184
185	185	[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
186	186
187		-You will see the login interface of LPS8-V2 as shown below.
	189	+You will see the login interface of LG01v2 as shown below.
188	188
189	189	The account details for Web Login are:
190	190
...	...	@@ -195,59 +195,81 @@
195	195	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230106153501-1.png?width=894&height=367&rev=1.1||alt="image-20230106153501-1.png"]]
196	196
197	197
198		-= **3. Web Configure Pages** =
	200	+= 3. Web Configure Pages =
199	199
200		-== **3.1 Home** ==
	202	+== 3.1 Home ==
201	201
202	202
203		-//Shows the system running status~://
	205	+Shows the system running status:
204	204
205		-[[image:image-20221104155612-1.png||height="497" width="942"]]
	207	+[[image:image-20230506113531-4.png||height="430" width="818"]]
206	206
207	207
208		-== **3.2 Network Settings** ==
	210	+== 3.2 Network Settings ==
209	209
210		-=== **3.2.1 Network ~-~-> WiFi** ===
	212	+=== 3.2.1 Network ~-~-> WiFi ===
211	211
212	212
213		-[[image:image-20221104155654-2.png||height="319" width="813"]]
	215	+[[image:image-20230506113602-5.png]]
214	214
215	215
216		-=== **3.4.2 Network ~-~-> System Status** ===
	218	+=== 3.4.2 Network ~-~-> System Status ===
217	217
218	218
219		-[[image:image-20221104155724-3.png||height="679" width="861"]]
	221	+[[image:image-20230506113623-6.png||height="511" width="672"]]
220	220
221	221
222		-=== **3.4.3 Network ~-~-> Firewall** ===
	224	+== 3.5 System ==
223	223
	226	+=== 3.5.1  System ~-~-> System Overview ===
224	224
225		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616115351-6.png?width=661&height=244&rev=1.1||alt="image-20220616115351-6.png"]]
226	226
	229	+Shows the system info:
227	227
228		-== **3.5 System** ==
	231	+[[image:image-20230506113705-7.png]]
229	229
230		-=== **3.5.1  System ~-~-> System Overview** ===
231	231
	234	+=== 3.5.2 System ~-~-> Backup/Restore ===
232	232
233		-Shows the system info:
234	234
235		-[[image:image-20221104155907-4.png]]
	237	+[[image:image-20230506113722-8.png||height="254" width="797"]]
236	236
237	237
238		-=== **3.5.2 System ~-~-> Backup/Restore** ===
	240	+=== 3.5.3 System ~-~-> System General ===
239	239
240	240
241		-[[image:image-20221104155928-5.png||height="334" width="880"]]
	243	+In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
242	242
	245	+In addition, Users can customize the FallBack IP address.
243	243
244		-= (% id="cke_bm_1978S" style="display:none" %)** **(%%)**4. Build in Server** =
	247	+[[image:image-20230506113813-10.png||height="659" width="749"]]
245	245
246	246
	250	+=== 3.5.4 System ~-~-> Remoteit ===
	251	+
	252	+
	253	+In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
	254	+
	255	+the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
	256	+
	257	+[[image:image-20230506113831-11.png||height="567" width="748"]]
	258	+
	259	+
	260	+=== 3.5.5 System ~-~-> Package Management ===
	261	+
	262	+
	263	+In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
	264	+
	265	+[[image:image-20230506114127-12.png||height="803" width="762"]]
	266	+
	267	+
	268	+= (% id="cke_bm_1978S" style="display:none" %) (%%)4. Build in Server =
	269	+
	270	+
247	247	The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
248	248
249	249
250		-[[image:image-20221104155949-6.png||height="315" width="1023"]]
	274	+[[image:image-20230506113737-9.png]]
251	251
252	252
253	253	(% style="color:red" %)**Note:**
...	...	@@ -262,7 +262,7 @@
262	262	For the Node-Red, you can use the local IP address and the port is 1880 to access it.
263	263
264	264
265		-== **4.1 Application Server ~-~- Node-Red** ==
	289	+== 4.1 Application Server ~-~- Node-Red ==
266	266
267	267
268	268	You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
...	...	@@ -274,23 +274,24 @@
274	274	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
275	275
276	276
277		-= **5. How to configure the Lora Gateway** =
	301	+= 5. How to configure the Lora Gateway =
278	278
279		-== **5.1 Configure and Debug LoRa wireless of LG01v2** ==
	303	+== 5.1 Configure and Debug LoRa wireless of LG01v2 ==
280	280
281	281
282	282	First, the user needs to access the Linux console of LG01v2 via ssh
283	283
284		-IP address:  IP address of LG01v2
	308	+**IP address:  (% style="color:blue" %)IP address of LG01v2(%%)**
285	285
286		-Port:         22
	310	+**Port:  (% style="color:blue" %)22(%%)**
287	287
288		-User Name:      (% style="color:#4f81bd" %)**root**
	312	+**User Name:   (% style="color:blue" %)root(%%)**
289	289
290		-Password:         (% style="color:#4f81bd" %)**dragino**(%%) (default)
	314	+**Password:  (% style="color:blue" %)dragino(default)(%%)**
291	291
292	292	[[image:image-20230504100722-3.png||height="228" width="908"]]
293	293
	318	+
294	294	Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**:
295	295
296	296	(% class="box infomessage" %)
...	...	@@ -338,9 +338,9 @@
338	338	)))
339	339
340	340
341		-== **5.2 Example: LG01v2** ==
	366	+== 5.2 Example: LG01v2 ==
342	342
343		-=== **5.2.1 Introduce for the example:** ===
	368	+=== 5.2.1 Introduce for the example: ===
344	344
345	345
346	346	[[image:image-20221104102736-3.png||height="282" width="723"]]
...	...	@@ -351,7 +351,7 @@
351	351	* **LA66 Shield + UNO + DHT11**: The UNO will get the temperature and humidity and broadcast the value via LoRa protocol.
352	352	* **LG01v2** : LG01v2 is set to listening the LoRa Channel which LA66 is broadcasting. When LG01v2 get the data from LA66, LG01v2 will plot the data in built-in IoT server.
353	353
354		-=== **5.2.2 Set Up LA66 Shield + UNO** ===
	379	+=== 5.2.2 Set Up LA66 Shield + UNO ===
355	355
356	356
357	357	==== **Set up LA66 Module** ====
...	...	@@ -433,7 +433,7 @@
433	433	[[image:image-20221108175113-9.png||height="556" width="998"]]
434	434
435	435
436		-=== **5.2.3 Set Up LG01v2** ===
	461	+=== 5.2.3 Set Up LG01v2 ===
437	437
438	438
439	439	Configure LG01v2 LoRa channel parameters so it can get data from LA66 Shield
...	...	@@ -458,7 +458,7 @@
458	458	)))
459	459
460	460
461		-=== **5.2.4 Test result** ===
	486	+=== 5.2.4 Test result ===
462	462
463	463
464	464	After the above configuration is complete, users can send test simulation data to check whether the configuration is correct, In LA66 sheild serial console send:(% style="color:red" %)**(AT+SEND=1,hello world,2,3).**
...	...	@@ -475,7 +475,7 @@
475	475	[[image:image-20221108170314-3.png]]
476	476
477	477
478		-=== **5.2.5 Plot data chart in LG01v2** ===
	503	+=== 5.2.5 Plot data chart in LG01v2 ===
479	479
480	480
481	481	User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
...	...	@@ -492,48 +492,16 @@
492	492	[[image:image-20221108180458-11.png||height="402" width="1137"]]
493	493
494	494
495		-= (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**v(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
496	496
	521	+= 6. OTA System Update =
497	497
498		-(% style="color:blue" %)**USB TTL to LG01v2  Connection:**
499	499
500		-
501		-Port 1 of the UART on the LG01v2 is GND
502		-
503		-(% class="box infomessage" %)
504		-(((
505		-**TXD  <~-~--> UART RXD (Gray line)**
506		-
507		-**RXD  <~-~--> UART TXD (White line)**
508		-
509		-**GND <~-~--> GND (Black line)**
510		-)))
511		-
512		-
513		-**LG01v2 UART connection photo**
514		-
515		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
516		-
517		-
518		-
519		-In the PC, you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LG01v2. LG01v2 will output system info once power on as below:
520		-
521		-
522		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
523		-
524		-
525		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
526		-
527		-
528		-= **7. OTA System Update** =
529		-
530		-
531	531	LG01v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
532	532
533	533
534		-= **8. FAQ** =
	527	+= 7. FAQ =
535	535
536		-== **8.1 How does LG01v2 communicate with Lora shield (LoRa.h)** ==
	529	+== 7.1 How does LG01v2 communicate with Lora shield (LoRa.h) ==
537	537
538	538
539	539	This example describes how to use LG01v2, LoRa Shield to set up a LoRa network,
...	...	@@ -582,7 +582,7 @@
582	582	[[image:image-20221101162527-4.png]]
583	583
584	584
585		-== **8.2 How does LG01v2 communicate with Heltec LoRa Node** ==
	578	+== 7.2 How does LG01v2 communicate with Heltec LoRa Node ==
586	586
587	587
588	588	This example describes how to use LG01v2 and Heltec LoRa Node to set up a LoRa network,
...	...	@@ -623,15 +623,79 @@
623	623	[[image:image-20221112163119-4.png||height="808" width="560"]]
624	624
625	625
626		-= **9. OTA System Update** =
	619	+== 7.3 How does LG01v2 communicate with LoRaWAN node ==
627	627
628		-LG01v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
629	629
	622	+This example describes how to use LG01v2 and LSN50 to set up a  network,
630	630
631		-= **10. Trouble Shooting** =
	624	+In this case, users need to set LSN50 to work in ABP mode and transmit in only one frequency.
632	632
633		-== 10.1  Fallback IP does not work, how can users check ==
	626	+Assume we have a LG01v2 working in the frequency 868100000 now, below is the steps.
634	634
	628	+
	629	+**Step1: **Configure the LG01v2
	630	+
	631	+(% class="box infomessage" %)
	632	+(((
	633	+AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
	634	+AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
	635	+AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
	636	+AT+SYNCWORD=1  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
	637	+)))
	638	+
	639	+**Step2:  **Run AT commands to make the LSN50 work in Single frequency and ABP mode. Below are the AT commands:
	640	+
	641	+(% class="box infomessage" %)
	642	+(((
	643	+AT+FDR  ~-~--> Reset Parameters to Factory Default, Keys Reserve
	644	+AT+NJM=0  ~-~-->  Set to ABP mode
	645	+AT+ADR=0  ~-~-->  Set the Adaptive Data Rate Off
	646	+AT+DR=0  ~-~--> Set Data Rate (Set AT+DR=3 for 915 band)
	647	+AT+TDC=300000  ~-~-->  Set transmit interval to 5 minutes
	648	+AT+CHS=868100000  ~-~--> Set transmit frequency to 868.1Mhz
	649	+AT+DADDR=FFFFF111  ~-~--> Set Device Address to 26 01 1A F1
	650	+ATZ  ~-~--> Reset MCU
	651	+)))
	652	+
	653	+**Step3:  **Check result
	654	+
	655	+
	656	+
	657	+User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
	658	+
	659	+User can import this example in Node-Red: [[attach:LG01v2_LSN50v2_S31.json||target="_blank"]]
	660	+
	661	+
	662	+First the user needs to fill in the NwkSkey and AppSkey in the LoraWan Packet Decrypter node.
	663	+
	664	+[[image:image-20230620103535-2.png||height="591" width="1138"]]
	665	+
	666	+[[image:image-20230620103153-1.png||height="610" width="1141"]]
	667	+
	668	+
	669	+The data will be displayed in the built-in node-red UI
	670	+
	671	+**Browser input: (% style="background-color:yellow" %)__//http:~/~/<local-IPV4-address>//__(%%)**
	672	+
	673	+[[image:image-20230620103923-3.png||height="476" width="1138"]]
	674	+
	675	+
	676	+== 7.4 How can users factory reset LG01v2 ==
	677	+
	678	+
	679	+Users can download the image of LG01v2 from this link：[[dragino-lg01v2-1.7-0210>>https://www.dropbox.com/scl/fi/g0si61lcrvdjyto4ma951/dragino-lg01v2-1.7-0210.zip?rlkey=t03oqo493r2p7ign488rs2jsv&dl=0]]
	680	+
	681	+
	682	+Then follow the steps in the link below to restore factory Settings to LG01v2：
	683	+
	684	+[[How to flash a new image(OS) to the gateway>>url:https://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
	685	+
	686	+
	687	+= 8. Trouble Shooting =
	688	+
	689	+== 8.1  Fallback IP does not work, how can users check ==
	690	+
	691	+
635	635	When the computer has completed the above fallback IP configuration,the LG01v2 Web UI is still not accessible via fallback IP.
636	636
637	637
...	...	@@ -645,32 +645,34 @@
645	645
646	646	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413170246-4.png?rev=1.1||alt="image-20230413170246-4.png"]]
647	647
	705	+
648	648	**2. Check whether the firewall is disabled**
649	649
650	650	If the firewall is not down, this will affect access to the gateway.
651	651
652	652
653		-= (% style="color:inherit; font-family:inherit; font-size:29px" %)**11. Supports**(%%) =
	711	+= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
654	654
655	655
656	656	(((
657		-**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
	715	+If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
658	658	)))
659	659
660	660	(((
661		-**//With your question as detailed as possible. We will reply and help you in the shortest.//**
	719	+With your question as detailed as possible. We will reply and help you in the shortest.
662	662
663	663
664		-= **12. Reference** =
	722	+= 10. Reference =
665	665
666	666
667	667	* Install Tago Core: Refer **Install Tago Core in LG01v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
	726	+
668	668	* [[Advance OS Reference Guide for L>>doc:Main.Armbian OS instruction.WebHome]]G01v2.
669	669
670	670
671	671	)))
672	672
673		-= **13. Order Info** =
	732	+= 11. Order Info =
674	674
675	675
676	676	(% style="color:#0000ff" %)**LG01v2-XXX-YYY**
...	...	@@ -682,15 +682,15 @@
682	682
683	683	(% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
684	684
685		-* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
686		-* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
687		-* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
688		-* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
	744	+* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
	745	+* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America: Verizon, AT&T(FirstNet), U.S.Cellular; Canada: Telus
	746	+* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
	747	+* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
689	689
690	690	More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
691	691
692	692
693		-= **14. Manufacturer Info** =
	752	+= 12. Manufacturer Info =
694	694
695	695
696	696	**Shenzhen Dragino Technology Development co. LTD**
...	...	@@ -700,7 +700,7 @@
700	700	LongCheng Street, LongGang District ; Shenzhen 518116,China
701	701
702	702
703		-= **15. FCC Warning** =
	762	+= 13. FCC Warning =
704	704
705	705
706	706	(((

LG01v2_LSN50v2_S31.json

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+16.5 KB

Content

...	...	@@ -1,0 +1,587 @@
	1	+[
	2	+ {
	3	+ "id": "5e07f5eeeb2a969b",
	4	+ "type": "tab",
	5	+ "label": "流程 1",
	6	+ "disabled": false,
	7	+ "info": "",
	8	+ "env": []
	9	+ },
	10	+ {
	11	+ "id": "9c26fa2f19e2b556",
	12	+ "type": "function",
	13	+ "z": "5e07f5eeeb2a969b",
	14	+ "name": "hex to base64",
	15	+ "func": "var input = msg.payload;\nvar base64 = Buffer.from(input, 'hex').toString('base64');\nmsg.payload = base64;\nreturn msg;",
	16	+ "outputs": 1,
	17	+ "noerr": 0,
	18	+ "initialize": "",
	19	+ "finalize": "",
	20	+ "libs": [],
	21	+ "x": 220,
	22	+ "y": 160,
	23	+ "wires": [
	24	+ [
	25	+ "075bc9172a4c6570",
	26	+ "3601a98894805fbe"
	27	+ ]
	28	+ ]
	29	+ },
	30	+ {
	31	+ "id": "ee0480c81e66d657",
	32	+ "type": "function",
	33	+ "z": "5e07f5eeeb2a969b",
	34	+ "name": "function 4",
	35	+ "func": "var bytes = msg.payload[\"uplink_message\"]\nvar data = msg.payload[\"out\"]\nvar mode = (parseInt(data.substring(12, 14), 16) & 0x7C) >> 2;\nif (mode != 2)\n{\nvar bat = (parseInt(data.substring(0,4),16)&0x3FFF)/1000;\nvar TempC1 = (parseFloat(parseInt(data.substring(4, 8),16)/10).toFixed(2));\nvar ADC_CH0V = (parseInt(data.substring(8, 12), 16) ) / 1000;\nvar Digital_IStatus = (parseInt((data.substring(8, 12),16) & 0x02))?\"H\":\"L\"; \n\nif (mode != 6) {\n\n var EXTI_Trigger = ((parseInt(data.substring(12, 14), 16) & 0x01))? \"TRUE\" : \"FALSE\";\n\n var Door_status = ((parseInt(data.substring(12, 14), 16) & 0x80))? \"CLOSE\" : \"OPEN\";\n\n}\n}\nif (mode == 0) {\n\n var Work_mode = \"IIC\";\n\n if ((parseInt(data.substring(18, 22), 16)) == 0){\n\n var Illum = (parseInt(data.substring(8, 12), 16));\n\n }\n\n else {\n\n var TempC_SHT = parseFloat(((parseInt(data.substring(14, 18), 16)) / 10).toFixed(2));\n\n var Hum_SHT = parseFloat((((parseInt(data.substring(18, 22), 16))) / 10).toFixed(1));\n\n }\n \n}\n\nelse if (mode == 1) {\n\n var Work_mode = \" Distance\";\n\n var Distance_cm = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(1));\n\n if (((parseInt(data.substring(18, 22), 16))) != 65535){\n\n var Distance_signal_strength = parseFloat(((parseInt(data.substring(18, 22), 16))).toFixed(0));\n\n }\n\n}\n\nelse if (mode == 2) {\n\n var Work_mode = \" 3ADC\";\n\n var BatV = (parseInt(data.substring(18, 22), 16)) / 10;\n\n var ADC_CH0V = ((parseInt(data.substring(0, 4), 16))) / 1000;\n\n var ADC_CH1V = ((parseInt(data.substring(4, 8), 16))) / 1000;\n\n var ADC_CH4V = ((parseInt(data.substring(8, 12), 16))) / 1000;\n\n var Digital_IStatus = ((parseInt(data.substring(12, 14), 16)) & 0x02) ? \"H\" : \"L\";\n\n var EXTI_Trigger = ((parseInt(data.substring(12, 14), 16)) & 0x01) ? \"TRUE\" : \"FALSE\";\n\n var Door_status = ((parseInt(data.substring(13, 14), 16)) & 0x80) ? \"CLOSE\" : \"OPEN\";\n\n if ((parseInt(data.substring(18, 22), 16) === 0)) {\n\n var Illum = ((parseInt(data.substring(14, 18), 16)));\n\n }\n\n else {\n\n var TempC_SHT = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(2));\n\n var Hum_SHT = parseFloat((((parseInt(data.substring(18, 24), 16))) / 10).toFixed(1));\n\n }\n\n}\n\nelse if (mode == 3) {\n\n var Work_mode = \"3DS18B20\";\n\n var TempC2 = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(2));\n\n var TempC3 = parseFloat((((parseInt(data.substring(18, 24), 16))) / 10).toFixed(1));\n\n\n\n}\n\nelse if (mode == 4) {\n\n var Work_mode = \"Weight\";\n\n var Weight = ((parseInt(data.substring(14, 18), 16)));\n\n}\n\nelse if (mode == 5) {\n\n var Work_mode = \"Count\";\n\n var Count = ((parseInt(data.substring(14, 22), 16)));\n\n}\n\n\n\nvar b = { payload: bat }, c = { payload: TempC1 }, d = { payload: ADC_CH0V }, e = { payload: Digital_IStatus }, f = { payload: EXTI_Trigger }, g = { payload: Door_status }, j = { payload: TempC_SHT }, s = { payload: Hum_SHT }, k = { payload: Work_mode };\nreturn [b,c,d,e,f,g,j,k,s];",
	36	+ "outputs": 9,
	37	+ "noerr": 0,
	38	+ "initialize": "",
	39	+ "finalize": "",
	40	+ "libs": [],
	41	+ "x": 660,
	42	+ "y": 300,
	43	+ "wires": [
	44	+ [
	45	+ "fd22b92d2b8de0fb"
	46	+ ],
	47	+ [
	48	+ "3307256a4e1ea53a"
	49	+ ],
	50	+ [
	51	+ "a3fd8302ec399e31"
	52	+ ],
	53	+ [
	54	+ "c7d1f63ff5f0026a"
	55	+ ],
	56	+ [
	57	+ "159967056da52706"
	58	+ ],
	59	+ [
	60	+ "a21581a41adc1714"
	61	+ ],
	62	+ [
	63	+ "7bb78b78445ac9e3"
	64	+ ],
	65	+ [
	66	+ "0364752170ed6228"
	67	+ ],
	68	+ [
	69	+ "65293155d71d54b9"
	70	+ ]
	71	+ ]
	72	+ },
	73	+ {
	74	+ "id": "e763b293d42dbdd5",
	75	+ "type": "change",
	76	+ "z": "5e07f5eeeb2a969b",
	77	+ "name": "",
	78	+ "rules": [
	79	+ {
	80	+ "t": "change",
	81	+ "p": "payload",
	82	+ "pt": "msg",
	83	+ "from": "Data: (HEX:)",
	84	+ "fromt": "str",
	85	+ "to": "",
	86	+ "tot": "str"
	87	+ },
	88	+ {
	89	+ "t": "change",
	90	+ "p": "payload",
	91	+ "pt": "msg",
	92	+ "from": " ",
	93	+ "fromt": "str",
	94	+ "to": "",
	95	+ "tot": "str"
	96	+ }
	97	+ ],
	98	+ "action": "",
	99	+ "property": "",
	100	+ "from": "",
	101	+ "to": "",
	102	+ "reg": false,
	103	+ "x": 420,
	104	+ "y": 60,
	105	+ "wires": [
	106	+ [
	107	+ "9c26fa2f19e2b556",
	108	+ "416a930e89291528"
	109	+ ]
	110	+ ]
	111	+ },
	112	+ {
	113	+ "id": "075bc9172a4c6570",
	114	+ "type": "lorawan-packet-decrypt-nwkey-appkey",
	115	+ "z": "5e07f5eeeb2a969b",
	116	+ "name": "FFFFF111",
	117	+ "nsw": "CCFFFFFFFFFFFFFFFFFFFFFFFFFFFFAA",
	118	+ "asw": "FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCC",
	119	+ "x": 510,
	120	+ "y": 160,
	121	+ "wires": [
	122	+ [
	123	+ "ee0480c81e66d657"
	124	+ ]
	125	+ ]
	126	+ },
	127	+ {
	128	+ "id": "13dc77a4e2bb4f72",
	129	+ "type": "serial in",
	130	+ "z": "5e07f5eeeb2a969b",
	131	+ "name": "",
	132	+ "serial": "bb1c0e81fd51fa9e",
	133	+ "x": 190,
	134	+ "y": 60,
	135	+ "wires": [
	136	+ [
	137	+ "e763b293d42dbdd5"
	138	+ ]
	139	+ ]
	140	+ },
	141	+ {
	142	+ "id": "3307256a4e1ea53a",
	143	+ "type": "ui_chart",
	144	+ "z": "5e07f5eeeb2a969b",
	145	+ "name": "",
	146	+ "group": "c1fddd37879528e5",
	147	+ "order": 1,
	148	+ "width": 0,
	149	+ "height": 0,
	150	+ "label": "TempC1",
	151	+ "chartType": "line",
	152	+ "legend": "false",
	153	+ "xformat": "HH:mm:ss",
	154	+ "interpolate": "linear",
	155	+ "nodata": "",
	156	+ "dot": false,
	157	+ "ymin": "",
	158	+ "ymax": "",
	159	+ "removeOlder": 1,
	160	+ "removeOlderPoints": "",
	161	+ "removeOlderUnit": "3600",
	162	+ "cutout": 0,
	163	+ "useOneColor": false,
	164	+ "useUTC": false,
	165	+ "colors": [
	166	+ "#1f77b4",
	167	+ "#aec7e8",
	168	+ "#ff7f0e",
	169	+ "#2ca02c",
	170	+ "#98df8a",
	171	+ "#d62728",
	172	+ "#ff9896",
	173	+ "#9467bd",
	174	+ "#c5b0d5"
	175	+ ],
	176	+ "outputs": 1,
	177	+ "useDifferentColor": false,
	178	+ "className": "",
	179	+ "x": 940,
	180	+ "y": 160,
	181	+ "wires": [
	182	+ []
	183	+ ]
	184	+ },
	185	+ {
	186	+ "id": "a3fd8302ec399e31",
	187	+ "type": "ui_chart",
	188	+ "z": "5e07f5eeeb2a969b",
	189	+ "name": "",
	190	+ "group": "6d46fdae9f413f7b",
	191	+ "order": 1,
	192	+ "width": 0,
	193	+ "height": 0,
	194	+ "label": "ADC_CH0V",
	195	+ "chartType": "line",
	196	+ "legend": "false",
	197	+ "xformat": "HH:mm:ss",
	198	+ "interpolate": "linear",
	199	+ "nodata": "",
	200	+ "dot": false,
	201	+ "ymin": "",
	202	+ "ymax": "",
	203	+ "removeOlder": 1,
	204	+ "removeOlderPoints": "",
	205	+ "removeOlderUnit": "3600",
	206	+ "cutout": 0,
	207	+ "useOneColor": false,
	208	+ "useUTC": false,
	209	+ "colors": [
	210	+ "#1f77b4",
	211	+ "#aec7e8",
	212	+ "#ff7f0e",
	213	+ "#2ca02c",
	214	+ "#98df8a",
	215	+ "#d62728",
	216	+ "#ff9896",
	217	+ "#9467bd",
	218	+ "#c5b0d5"
	219	+ ],
	220	+ "outputs": 1,
	221	+ "useDifferentColor": false,
	222	+ "className": "",
	223	+ "x": 950,
	224	+ "y": 200,
	225	+ "wires": [
	226	+ []
	227	+ ]
	228	+ },
	229	+ {
	230	+ "id": "fd22b92d2b8de0fb",
	231	+ "type": "ui_chart",
	232	+ "z": "5e07f5eeeb2a969b",
	233	+ "name": "",
	234	+ "group": "bb5657c2a8c290a3",
	235	+ "order": 1,
	236	+ "width": 0,
	237	+ "height": 0,
	238	+ "label": "BatV",
	239	+ "chartType": "line",
	240	+ "legend": "false",
	241	+ "xformat": "HH:mm:ss",
	242	+ "interpolate": "linear",
	243	+ "nodata": "",
	244	+ "dot": false,
	245	+ "ymin": "",
	246	+ "ymax": "",
	247	+ "removeOlder": 1,
	248	+ "removeOlderPoints": "",
	249	+ "removeOlderUnit": "3600",
	250	+ "cutout": 0,
	251	+ "useOneColor": false,
	252	+ "useUTC": false,
	253	+ "colors": [
	254	+ "#1f77b4",
	255	+ "#aec7e8",
	256	+ "#ff7f0e",
	257	+ "#2ca02c",
	258	+ "#98df8a",
	259	+ "#d62728",
	260	+ "#ff9896",
	261	+ "#9467bd",
	262	+ "#c5b0d5"
	263	+ ],
	264	+ "outputs": 1,
	265	+ "useDifferentColor": false,
	266	+ "className": "",
	267	+ "x": 930,
	268	+ "y": 120,
	269	+ "wires": [
	270	+ []
	271	+ ]
	272	+ },
	273	+ {
	274	+ "id": "c7d1f63ff5f0026a",
	275	+ "type": "ui_text",
	276	+ "z": "5e07f5eeeb2a969b",
	277	+ "group": "528e965cef294158",
	278	+ "order": 0,
	279	+ "width": "6",
	280	+ "height": "4",
	281	+ "name": "",
	282	+ "label": "Digital_IStatus",
	283	+ "format": "{{msg.payload}}",
	284	+ "layout": "col-center",
	285	+ "className": "",
	286	+ "x": 960,
	287	+ "y": 240,
	288	+ "wires": []
	289	+ },
	290	+ {
	291	+ "id": "159967056da52706",
	292	+ "type": "ui_text",
	293	+ "z": "5e07f5eeeb2a969b",
	294	+ "group": "5e615e3edb5999a0",
	295	+ "order": 0,
	296	+ "width": "6",
	297	+ "height": "4",
	298	+ "name": "",
	299	+ "label": "EXTI_Trigger",
	300	+ "format": "{{msg.payload}}",
	301	+ "layout": "col-center",
	302	+ "className": "",
	303	+ "x": 950,
	304	+ "y": 280,
	305	+ "wires": []
	306	+ },
	307	+ {
	308	+ "id": "7bb78b78445ac9e3",
	309	+ "type": "ui_chart",
	310	+ "z": "5e07f5eeeb2a969b",
	311	+ "name": "",
	312	+ "group": "5f7fec85295a7f7c",
	313	+ "order": 0,
	314	+ "width": 0,
	315	+ "height": 0,
	316	+ "label": "TempC_SHT",
	317	+ "chartType": "line",
	318	+ "legend": "false",
	319	+ "xformat": "HH:mm:ss",
	320	+ "interpolate": "linear",
	321	+ "nodata": "",
	322	+ "dot": false,
	323	+ "ymin": "",
	324	+ "ymax": "",
	325	+ "removeOlder": 1,
	326	+ "removeOlderPoints": "",
	327	+ "removeOlderUnit": "3600",
	328	+ "cutout": 0,
	329	+ "useOneColor": false,
	330	+ "useUTC": false,
	331	+ "colors": [
	332	+ "#1f77b4",
	333	+ "#aec7e8",
	334	+ "#ff7f0e",
	335	+ "#2ca02c",
	336	+ "#98df8a",
	337	+ "#d62728",
	338	+ "#ff9896",
	339	+ "#9467bd",
	340	+ "#c5b0d5"
	341	+ ],
	342	+ "outputs": 1,
	343	+ "useDifferentColor": false,
	344	+ "className": "",
	345	+ "x": 950,
	346	+ "y": 360,
	347	+ "wires": [
	348	+ []
	349	+ ]
	350	+ },
	351	+ {
	352	+ "id": "0364752170ed6228",
	353	+ "type": "ui_text",
	354	+ "z": "5e07f5eeeb2a969b",
	355	+ "group": "3cb616f18674c42a",
	356	+ "order": 0,
	357	+ "width": "6",
	358	+ "height": "4",
	359	+ "name": "",
	360	+ "label": "Work_mode",
	361	+ "format": "{{msg.payload}}",
	362	+ "layout": "col-center",
	363	+ "className": "",
	364	+ "x": 950,
	365	+ "y": 400,
	366	+ "wires": []
	367	+ },
	368	+ {
	369	+ "id": "65293155d71d54b9",
	370	+ "type": "ui_chart",
	371	+ "z": "5e07f5eeeb2a969b",
	372	+ "name": "",
	373	+ "group": "bb2e35e7a931c198",
	374	+ "order": 0,
	375	+ "width": 0,
	376	+ "height": 0,
	377	+ "label": "Hum_SHT",
	378	+ "chartType": "line",
	379	+ "legend": "false",
	380	+ "xformat": "HH:mm:ss",
	381	+ "interpolate": "linear",
	382	+ "nodata": "",
	383	+ "dot": false,
	384	+ "ymin": "",
	385	+ "ymax": "",
	386	+ "removeOlder": 1,
	387	+ "removeOlderPoints": "",
	388	+ "removeOlderUnit": "3600",
	389	+ "cutout": 0,
	390	+ "useOneColor": false,
	391	+ "useUTC": false,
	392	+ "colors": [
	393	+ "#1f77b4",
	394	+ "#aec7e8",
	395	+ "#ff7f0e",
	396	+ "#2ca02c",
	397	+ "#98df8a",
	398	+ "#d62728",
	399	+ "#ff9896",
	400	+ "#9467bd",
	401	+ "#c5b0d5"
	402	+ ],
	403	+ "outputs": 1,
	404	+ "useDifferentColor": false,
	405	+ "className": "",
	406	+ "x": 950,
	407	+ "y": 440,
	408	+ "wires": [
	409	+ []
	410	+ ]
	411	+ },
	412	+ {
	413	+ "id": "a21581a41adc1714",
	414	+ "type": "ui_text",
	415	+ "z": "5e07f5eeeb2a969b",
	416	+ "group": "9109ae41eee353df",
	417	+ "order": 0,
	418	+ "width": "6",
	419	+ "height": "4",
	420	+ "name": "",
	421	+ "label": "Door_status",
	422	+ "format": "{{msg.payload}}",
	423	+ "layout": "col-center",
	424	+ "className": "",
	425	+ "x": 950,
	426	+ "y": 320,
	427	+ "wires": []
	428	+ },
	429	+ {
	430	+ "id": "416a930e89291528",
	431	+ "type": "debug",
	432	+ "z": "5e07f5eeeb2a969b",
	433	+ "name": "debug 2",
	434	+ "active": true,
	435	+ "tosidebar": true,
	436	+ "console": false,
	437	+ "tostatus": false,
	438	+ "complete": "false",
	439	+ "statusVal": "",
	440	+ "statusType": "auto",
	441	+ "x": 660,
	442	+ "y": 60,
	443	+ "wires": []
	444	+ },
	445	+ {
	446	+ "id": "3601a98894805fbe",
	447	+ "type": "debug",
	448	+ "z": "5e07f5eeeb2a969b",
	449	+ "name": "debug 3",
	450	+ "active": true,
	451	+ "tosidebar": true,
	452	+ "console": false,
	453	+ "tostatus": false,
	454	+ "complete": "false",
	455	+ "statusVal": "",
	456	+ "statusType": "auto",
	457	+ "x": 380,
	458	+ "y": 240,
	459	+ "wires": []
	460	+ },
	461	+ {
	462	+ "id": "bb1c0e81fd51fa9e",
	463	+ "type": "serial-port",
	464	+ "serialport": "/dev/ttyUSB0",
	465	+ "serialbaud": "9600",
	466	+ "databits": "8",
	467	+ "parity": "none",
	468	+ "stopbits": "1",
	469	+ "waitfor": "",
	470	+ "dtr": "none",
	471	+ "rts": "none",
	472	+ "cts": "none",
	473	+ "dsr": "none",
	474	+ "newline": "\\n",
	475	+ "bin": "false",
	476	+ "out": "char",
	477	+ "addchar": "\\r\\n",
	478	+ "responsetimeout": "10000"
	479	+ },
	480	+ {
	481	+ "id": "c1fddd37879528e5",
	482	+ "type": "ui_group",
	483	+ "name": "BatV",
	484	+ "tab": "abb98f80600a5448",
	485	+ "order": 1,
	486	+ "disp": true,
	487	+ "width": "6",
	488	+ "collapse": false,
	489	+ "className": ""
	490	+ },
	491	+ {
	492	+ "id": "6d46fdae9f413f7b",
	493	+ "type": "ui_group",
	494	+ "name": "ADC_CH0V",
	495	+ "tab": "abb98f80600a5448",
	496	+ "order": 1,
	497	+ "disp": true,
	498	+ "width": "6",
	499	+ "collapse": false,
	500	+ "className": ""
	501	+ },
	502	+ {
	503	+ "id": "bb5657c2a8c290a3",
	504	+ "type": "ui_group",
	505	+ "name": "BatV",
	506	+ "tab": "abb98f80600a5448",
	507	+ "order": 3,
	508	+ "disp": true,
	509	+ "width": "6",
	510	+ "collapse": false,
	511	+ "className": ""
	512	+ },
	513	+ {
	514	+ "id": "528e965cef294158",
	515	+ "type": "ui_group",
	516	+ "name": "Digital_IStatus",
	517	+ "tab": "abb98f80600a5448",
	518	+ "order": 4,
	519	+ "disp": true,
	520	+ "width": "6",
	521	+ "collapse": false,
	522	+ "className": ""
	523	+ },
	524	+ {
	525	+ "id": "5e615e3edb5999a0",
	526	+ "type": "ui_group",
	527	+ "name": "EXTI_Trigger",
	528	+ "tab": "abb98f80600a5448",
	529	+ "order": 5,
	530	+ "disp": true,
	531	+ "width": "6",
	532	+ "collapse": false,
	533	+ "className": ""
	534	+ },
	535	+ {
	536	+ "id": "5f7fec85295a7f7c",
	537	+ "type": "ui_group",
	538	+ "name": "TempC_SHT",
	539	+ "tab": "abb98f80600a5448",
	540	+ "order": 6,
	541	+ "disp": true,
	542	+ "width": "6",
	543	+ "collapse": false,
	544	+ "className": ""
	545	+ },
	546	+ {
	547	+ "id": "3cb616f18674c42a",
	548	+ "type": "ui_group",
	549	+ "name": "Work_mode",
	550	+ "tab": "abb98f80600a5448",
	551	+ "order": 7,
	552	+ "disp": true,
	553	+ "width": "6",
	554	+ "collapse": false,
	555	+ "className": ""
	556	+ },
	557	+ {
	558	+ "id": "bb2e35e7a931c198",
	559	+ "type": "ui_group",
	560	+ "name": "Hum_SHT",
	561	+ "tab": "abb98f80600a5448",
	562	+ "order": 8,
	563	+ "disp": true,
	564	+ "width": "6",
	565	+ "collapse": false,
	566	+ "className": ""
	567	+ },
	568	+ {
	569	+ "id": "9109ae41eee353df",
	570	+ "type": "ui_group",
	571	+ "name": "Door_status",
	572	+ "tab": "abb98f80600a5448",
	573	+ "order": 9,
	574	+ "disp": true,
	575	+ "width": "6",
	576	+ "collapse": false,
	577	+ "className": ""
	578	+ },
	579	+ {
	580	+ "id": "abb98f80600a5448",
	581	+ "type": "ui_tab",
	582	+ "name": "LSN50v2 S31",
	583	+ "icon": "LSN50v2 S31",
	584	+ "disabled": false,
	585	+ "hidden": false
	586	+ }
	587	+]

image-20230506110646-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+383.1 KB

Content

image-20230506113332-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+28.6 KB

Content

image-20230506113432-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+36.5 KB

Content

image-20230506113531-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+403.2 KB

Content

image-20230506113602-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+26.7 KB

Content

image-20230506113623-6.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+35.4 KB

Content

image-20230506113705-7.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+40.9 KB

Content

image-20230506113722-8.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+33.2 KB

Content

image-20230506113737-9.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+25.2 KB

Content

image-20230506113813-10.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+39.5 KB

Content

image-20230506113831-11.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+32.2 KB

Content

image-20230506114127-12.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+56.1 KB

Content

image-20230506115438-13.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+413.6 KB

Content

image-20230620103153-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+127.6 KB

Content

image-20230620103535-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+156.3 KB

Content

image-20230620103923-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+72.7 KB

Content