Last modified by Kilight Cao on 2024/03/04 09:10
<
From version < 108.1 >
edited by Kilight Cao
on 2022/12/28 11:00
To version < 102.1 >
edited by Edwin Chen
on 2022/11/14 19:41
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Edwin
Content
... ... @@ -11,30 +11,23 @@
11 11  
12 12  {{toc/}}
13 13  
14 -
15 -
16 -
17 -
18 -
19 19  = **1. Introduction** =
20 20  
21 -== **1.1 What is LG01v2** ==
22 22  
17 +== **1.1 What is LG01-V2** ==
23 23  
19 +
24 24  (((
25 25  (((
26 -The LG01v2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 -
28 -LG01v2 is specially design for (% style="color:green" %)**peer to peer LoRa**(%%) protocol instead of LoRaWAN protocol. The LG01v2 use single channel LoRa module to minimize the deployment cost for a private p2p LoRa wireless network.
22 +The LG01-V2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
29 29  )))
30 30  
31 31  (((
32 -LG01v2 uses Open Source Linux system. User can modify the Linux part and develop customize software base on it. It has (% style="color:green" %)**1.2Ghz Quad-Core CPU**(%%) , (% style="color:green" %)**4GB eMMC storage**(%%) and (% style="color:green" %)**512MB RAM**(%%) for most application.
33 -
34 -LG01v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
26 +LG01-V2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
35 35  )))
36 36  
37 37  
30 +
38 38  == **1.2 Specifications** ==
39 39  
40 40  
... ... @@ -63,6 +63,7 @@
63 63  * Remote Management
64 64  * Auto-provisioning for batch deployment and management
65 65  * LoRa Gateway
59 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
66 66  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
67 67  
68 68  == **1.4 Block Diagram** ==
... ... @@ -90,6 +90,7 @@
90 90  (% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
91 91  
92 92  
87 +
93 93  == **1.6 Button Intruction** ==
94 94  
95 95  
... ... @@ -106,6 +106,7 @@
106 106   //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
107 107  
108 108  
104 +
109 109  = **2. Quick Start** =
110 110  
111 111  
... ... @@ -116,6 +116,7 @@
116 116  
117 117  == **2.1 Connects to the network and accesses the gateway Web UI** ==
118 118  
115 +
119 119  == **2.1.1 connect the network.** ==
120 120  
121 121  
... ... @@ -148,11 +148,11 @@
148 148  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102847-7.png?rev=1.1||alt="image-20220622102847-7.png"]]
149 149  
150 150  
148 +
151 151  = **3. Web Configure Pages** =
152 152  
153 153  == **3.1 Home** ==
154 154  
155 -
156 156  //Shows the system running status~://
157 157  
158 158  [[image:image-20221104155612-1.png||height="497" width="942"]]
... ... @@ -160,6 +160,7 @@
160 160  
161 161  == **3.2 Network Settings** ==
162 162  
160 +
163 163  === **3.2.1 Network ~-~-> WiFi** ===
164 164  
165 165  
... ... @@ -166,6 +166,7 @@
166 166  [[image:image-20221104155654-2.png||height="319" width="813"]]
167 167  
168 168  
167 +
169 169  === **3.4.2 Network ~-~-> System Status** ===
170 170  
171 171  
... ... @@ -172,6 +172,7 @@
172 172  [[image:image-20221104155724-3.png||height="679" width="861"]]
173 173  
174 174  
174 +
175 175  === **3.4.3 Network ~-~-> Firewall** ===
176 176  
177 177  
... ... @@ -178,8 +178,10 @@
178 178  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616115351-6.png?width=661&height=244&rev=1.1||alt="image-20220616115351-6.png"]]
179 179  
180 180  
181 +
181 181  == **3.5 System** ==
182 182  
184 +
183 183  === **3.5.1  System ~-~-> System Overview** ===
184 184  
185 185  
... ... @@ -188,6 +188,7 @@
188 188  [[image:image-20221104155907-4.png]]
189 189  
190 190  
193 +
191 191  === **3.5.2 System ~-~-> Backup/Restore** ===
192 192  
193 193  
... ... @@ -208,13 +208,15 @@
208 208   **Path**: System ~-~-> Built-in Server
209 209  
210 210  
211 -(% style="color:blue" %)**Troubleshooting：**
214 +**Troubleshooting:**
212 212  
216 +
213 213  **~ 1. URL does not jump properly**
214 214  
215 215   For the Node-Red, you can use the local IP address and the port is 1880 to access it.
216 216  
217 217  
222 +
218 218  == **4.1 Application Server ~-~- Node-Red** ==
219 219  
220 220  
... ... @@ -229,6 +229,7 @@
229 229  
230 230  = **5. How to configure the Lora Gateway** =
231 231  
237 +
232 232  == **5.1 Configure and Debug LoRa wireless of LG01v2** ==
233 233  
234 234  
... ... @@ -252,9 +252,7 @@
252 252  )))
253 253  
254 254  
255 -(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**
256 -
257 -
261 +(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**(%%)
258 258  (% style="color:red" %)[[image:image-20221029174703-3.png]]
259 259  
260 260  
... ... @@ -263,19 +263,19 @@
263 263  
264 264  (% class="box infomessage" %)
265 265  (((
266 -**AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
267 -AT+GROUPMOD=0,0  ~-~-->  TX and RX group
268 -AT+BW=0,0  ~-~-->  TX and RX Bandwidth
269 -AT+SF=12,12  ~-~-->  TX and RX Spreading Factor
270 -AT+POWER=14  ~-~-->  TX Power Range
271 -AT+CRC=1,1  ~-~-->  TX and RX CRC Type
272 -AT+HEADER=0,0  ~-~-->  TX and RX Header Type
273 -AT+CR=1,1  ~-~-->  TX and RX Coding Rate
274 -AT+IQ=0,0  ~-~-->  TX and RX InvertIQ
275 -AT+PREAMBLE=8,8  ~-~-->  TX and RX Preamble Length
276 -AT+SYNCWORD=0  ~-~-->  Syncword(0: private，1: public)
277 -AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
278 -AT+RXDAFORM=1**                              
270 +AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
271 +AT+GROUPMOD=0,0  ~-~--> TX and RX group
272 +AT+BW=0,0  ~-~--> TX and RX Bandwidth
273 +AT+SF=12,12  ~-~--> TX and RX Spreading Factor
274 +AT+POWER=14  ~-~--> TX Power Range
275 +AT+CRC=1,1  ~-~--> TX and RX CRC Type
276 +AT+HEADER=0,0  ~-~--> TX and RX Header Type
277 +AT+CR=1,1  ~-~--> TX and RX Coding Rate
278 +AT+IQ=0,0  ~-~--> TX and RX InvertIQ
279 +AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length
280 +AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
281 +AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
282 +AT+RXDAFORM=1                              
279 279  )))
280 280  
281 281  
... ... @@ -283,7 +283,6 @@
283 283  
284 284  === **5.2.1 Introduce for the example:** ===
285 285  
286 -
287 287  [[image:image-20221104102736-3.png||height="282" width="723"]]
288 288  
289 289  
... ... @@ -292,12 +292,11 @@
292 292  * **LA66 Shield + UNO + DHT11**: The UNO will get the temperature and humidity and broadcast the value via LoRa protocol.
293 293  * **LG01v2** : LG01v2 is set to listening the LoRa Channel which LA66 is broadcasting. When LG01v2 get the data from LA66, LG01v2 will plot the data in built-in IoT server.
294 294  
295 -=== **5.2.2 Set Up LA66 Shield + UNO** ===
298 +=== 5.2.2 Set Up LA66 Shield + UNO ===
296 296  
297 297  
298 298  ==== **Set up LA66 Module** ====
299 299  
300 -
301 301  LA66 Module is loaded with the firmware **[[LA66 Peer-to-Peer firmware>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]] **and user can use AT Command to set up LA66 with below parameters:
302 302  
303 303  (((
... ... @@ -322,13 +322,10 @@
322 322  )))
323 323  
324 324  
325 -
326 326  ==== **Set up Arduino UNO** ====
327 327  
328 -(% id="cke_bm_1033249S" style="display:none" %)** **
329 +(% id="cke_bm_1033249S" style="display:none" %)** **(%%)**Hardware Connection**
329 329  
330 -**Hardware Connection**
331 -
332 332  (% class="box infomessage" %)
333 333  (((
334 334  **The DHT11 sensor connects to the LA66 Shield:**
... ... @@ -341,17 +341,13 @@
341 341  [[image:image-20221108170731-5.png||height="588" width="441"]]
342 342  
343 343  
344 -
345 345  ===== **1. Open Arduino IDE** =====
346 346  
347 -
348 348  [[image:image-20221108172149-6.png||height="650" width="542"]]
349 349  
350 350  
351 -
352 352  ===== **2. Open project** =====
353 353  
354 -
355 355  Users can download Arduino files from this link: [[attach:Log-Temperature-Sensor-and-send-data-to-Node-red.ino||target="_blank"]]
356 356  
357 357  Then click Compile and Upload to LA66 Shield,
... ... @@ -359,24 +359,22 @@
359 359  [[image:image-20221108172432-7.png]]
360 360  
361 361  
362 -
363 363  ===== **3. Open the Serial Monitor to check the LA66 Shield data** =====
364 364  
365 -
366 366  The UNO will now reads the temperature and humidity data from the sensor and broadcast it via LoRa wireless,
367 367  
368 368  [[image:image-20221108174840-8.png||height="731" width="671"]]
369 369  
370 370  
371 -
372 372  Sending out data as below.
373 373  
374 374  [[image:image-20221108175113-9.png||height="556" width="998"]]
375 375  
376 376  
377 -=== **5.2.3 Set Up LG01v2** ===
378 378  
370 +=== 5.2.3 Set Up LG01v2 ===
379 379  
372 +
380 380  Configure LG01v2 LoRa channel parameters so it can get data from LA66 Shield
381 381  
382 382  (% style="color:red; font-weight:bold" %)**LG01v**(% style="color:red" %)**2 as Receiver: (configured as AT+RXMOD=65535,2)**
... ... @@ -399,9 +399,8 @@
399 399  )))
400 400  
401 401  
402 -=== **5.2.4 Test result** ===
395 +=== 5.2.4 Test result ===
403 403  
404 -
405 405  After the above configuration is complete, users can send test simulation data to check whether the configuration is correct, In LA66 sheild serial console send:(% style="color:red" %)**(AT+SEND=1,hello world,2,3).**
406 406  )))
407 407  
... ... @@ -410,7 +410,6 @@
410 410  [[image:image-20221108164413-2.png]]
411 411  
412 412  
413 -
414 414  In the real-time log of LG01v2：
415 415  
416 416  [[image:image-20221108170314-3.png]]
... ... @@ -436,10 +436,10 @@
436 436  = (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**v(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
437 437  
438 438  
439 -(% style="color:blue" %)**USB TTL to LG01v2  Connection:**
430 +(% style="color:blue" %)**USB TTL to LG01-V2  Connection:**
440 440  
441 441  
442 -Port 1 of the UART on the LG01v2 is GND
433 +Port 1 of the UART on the LG01-V2 is GND
443 443  
444 444  (% class="box infomessage" %)
445 445  (((
... ... @@ -451,7 +451,7 @@
451 451  )))
452 452  
453 453  
454 -**LG01v2 UART connection photo**
445 +**LG01-V2 UART connection photo**
455 455  
456 456  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
457 457  
... ... @@ -462,29 +462,23 @@
462 462  
463 463  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
464 464  
465 -
466 466  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
467 467  
468 468  
469 -= **7. OTA System Update** =
459 += **7. FAQ** =
470 470  
471 471  
472 -LG01v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
462 +== **7.1 How does LG01-V2 communicate with Lora shield (LoRa.h)** ==
473 473  
474 474  
475 -= **8. FAQ** =
465 +This example describes how to use LG01-V2, LoRa Shield to set up a LoRa network,
476 476  
477 -== **8.1 How does LG01v2 communicate with Lora shield (LoRa.h)** ==
478 -
479 -
480 -This example describes how to use LG01v2, LoRa Shield to set up a LoRa network,
481 -
482 482  [[image:image-20221103152238-8.png||height="251" width="654"]]
483 483  
484 484  
485 -(% style="color:red" %)**Prerequisites: The configurations of LG01v2 and Lora shield must match**
470 +(% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
486 486  
487 -**LG01v2 configuration:**
472 +**LG01-V2 configuration:**
488 488  
489 489  (% class="box infomessage" %)
490 490  (((
... ... @@ -502,8 +502,6 @@
502 502  AT+RXDAFORM=1    
503 503  )))
504 504  
505 -
506 -
507 507  **Lora shield configuration:**
508 508  
509 509  Lora Shield example: [[attach:LoRa_Shield_Sketch_For_MQTT.ino||target="_blank"]] , [[attach:arduino-LoRa-master.zip||target="_blank"]]
... ... @@ -511,30 +511,27 @@
511 511  [[image:image-20221101161318-2.png]]
512 512  
513 513  
497 +**Test LG01-V2 to receive Lora Shield data:**
514 514  
515 -**Test LG01v2 to receive Lora Shield data:**
516 -
517 517  [[image:image-20221101161951-3.png]]
518 518  
519 519  
502 +**Test the LG01-V2 to send data:**
520 520  
521 -**Test the LG01v2 to send data:**
522 -
523 523  [[image:image-20221101162527-4.png]]
524 524  
525 525  
526 -== **8.2 How does LG01v2 communicate with Heltec LoRa Node** ==
507 +== **7.2 How does LG01-V2 communicate with Heltec LoRa Node** ==
527 527  
528 528  
529 -This example describes how to use LG01v2 and Heltec LoRa Node to set up a LoRa network,
510 +This example describes how to use LG01-V2 and Heltec LoRa Node to set up a LoRa network,
530 530  
531 531  [[image:image-20221112161111-2.png||height="258" width="692"]]
532 532  
533 -(% style="color:red" %)**Prerequisites: The configurations of LG01v2 and Lora shield must match**
514 +(% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
534 534  
516 +**LG01-V2 configuration:**
535 535  
536 -**LG01v2 configuration:**
537 -
538 538  (% class="box infomessage" %)
539 539  (((
540 540  AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
... ... @@ -551,7 +551,6 @@
551 551  AT+RXDAFORM=1  ~-~--> RX data format**（0: Hex ,1: String）**
552 552  )))
553 553  
554 -
555 555  After we upload the sketch to Heltec LoRa Node, we can see below output from Arduino.
556 556  
557 557  Lora Shield example: [[attach:LoRa_send_trial.ino||target="_blank"]]
... ... @@ -563,10 +563,9 @@
563 563  
564 564  [[image:image-20221112163119-4.png||height="808" width="560"]]
565 565  
545 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
566 566  
567 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)**9. Supports**(%%) =
568 568  
569 -
570 570  (((
571 571  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
572 572  )))
... ... @@ -575,24 +575,29 @@
575 575  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
576 576  
577 577  
578 -= **10. Reference** =
579 579  
557 += **9. Reference** =
580 580  
581 -* Install Tago Core: Refer **Install Tago Core in LG01v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
582 -* [[Advance OS Reference Guide for L>>doc:Main.Armbian OS instruction.WebHome]]G01v2.
583 583  
560 +* Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
561 +* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
562 +
584 584  
585 585  )))
586 586  
587 -= **11. Order Info** =
566 += **10. Order Info** =
588 588  
589 589  
590 -(% style="color:#0000ff" %)**LG01v2-XXX-YYY**
569 +(% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
591 591  
592 592  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
593 593  
594 -* (% style="color:red" %)**868**(%%): For frequency : 863 ~~ 870Mhz
595 -* (% style="color:red" %)**915**(%%): For frequency : 902 ~~ 928Mhz
573 +* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
574 +* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
575 +* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
576 +* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
577 +* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
578 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
596 596  
597 597  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
598 598  
... ... @@ -604,9 +604,10 @@
604 604  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
605 605  
606 606  
607 -= **12. Manufacturer Info** =
608 608  
591 += **10. Manufacturer Info** =
609 609  
593 +
610 610  **Shenzhen Dragino Technology Development co. LTD**
611 611  
612 612  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -614,9 +614,10 @@
614 614  LongCheng Street, LongGang District ; Shenzhen 518116,China
615 615  
616 616  
617 -= **13. FCC Warning** =
618 618  
602 += **11. FCC Warning** =
619 619  
604 +
620 620  (((
621 621  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
622 622  )))
... ... @@ -646,6 +646,7 @@
646 646  (((
647 647  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
648 648  
649 -
650 650  
651 651  )))
636 +
637 +~)~)~)

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0