Summary

• Page properties (2 modified, 0 added, 0 removed)
• Attachments (0 modified, 17 added, 0 removed)
  • Log-Temperature-Sensor-and-send-data-to-Node-red.json
  • image-20230504095457-1.png
  • image-20230504095502-2.png
  • image-20230504100722-3.png
  • image-20230506110646-1.png
  • image-20230506113332-2.png
  • image-20230506113432-3.png
  • image-20230506113531-4.png
  • image-20230506113602-5.png
  • image-20230506113623-6.png
  • image-20230506113705-7.png
  • image-20230506113722-8.png
  • image-20230506113737-9.png
  • image-20230506113813-10.png
  • image-20230506113831-11.png
  • image-20230506114127-12.png
  • image-20230506115438-13.png

Details

Page properties

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.Kilight
	1	+XWiki.Xiaoling

Content

...	...	@@ -16,26 +16,26 @@
16	16
17	17
18	18
19		-= **1. Introduction** =
	19	+= 1. Introduction =
20	20
21		-== **1.1 What is LG01v2** ==
	21	+== 1.1 What is LG01v2 ==
22	22
23	23
24	24	(((
25	25	(((
26		-The LG01v2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
	26	+The LG01v2 is an (% style="color:blue" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27	27
28		-LG01v2 is specially design for (% style="color:green" %)**peer to peer LoRa**(%%) protocol instead of LoRaWAN protocol. The LG01v2 use single channel LoRa module to minimize the deployment cost for a private p2p LoRa wireless network.
	28	+LG01v2 is specially design for (% style="color:blue" %)**peer to peer LoRa**(%%) protocol instead of LoRaWAN protocol. The LG01v2 use single channel LoRa module to minimize the deployment cost for a private p2p LoRa wireless network.
29	29	)))
30	30
31	31	(((
32		-LG01v2 uses Open Source Linux system. User can modify the Linux part and develop customize software base on it. It has (% style="color:green" %)**1.2Ghz Quad-Core CPU**(%%) , (% style="color:green" %)**4GB eMMC storage**(%%) and (% style="color:green" %)**512MB RAM**(%%) for most application.
	32	+LG01v2 uses Open Source Linux system. User can modify the Linux part and develop customize software base on it. It has (% style="color:blue" %)**1.2Ghz Quad-Core CPU**(%%) , (% style="color:blue" %)**4GB eMMC storage**(%%) and (% style="color:blue" %)**512MB RAM**(%%) for most application.
33	33
34		-LG01v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
	34	+LG01v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
35	35	)))
36	36
37	37
38		-== **1.2 Specifications** ==
	38	+== 1.2 Specifications ==
39	39
40	40
41	41	(% style="color:#037691" %)**Hardware System:**
...	...	@@ -55,9 +55,11 @@
55	55	* Storage Temperature: -20 ~~ 65°C
56	56	* Power Input: 5V, 2A, DC
57	57
58		-== **1.3 Features** ==
59	59
60	60
	60	+== 1.3 Features ==
	61	+
	62	+
61	61	* Open Source Debian system
62	62	* Managed by Web GUI, SSH via WAN or WiFi
63	63	* Remote Management
...	...	@@ -65,48 +65,50 @@
65	65	* LoRa Gateway
66	66	* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
67	67
68		-== **1.4 Block Diagram** ==
69	69
70	70
	72	+== 1.4 Block Diagram ==
71	71
72		-== **1.5 LED Indicators** ==
73	73
74	74
	76	+== 1.5 LED Indicators ==
	77	+
	78	+
75	75	LG01-V2 has totally four LEDs, They are:
76	76
77	77
78		-(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
	82	+(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
79	79
80		-(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
	84	+(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
81	81
82		-(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
	86	+(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
83	83
84		-// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
	88	+ ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
85	85
86		-// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
	90	+ ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
87	87
88		-// ✓** SOLID RED:** Device doesn't have an Internet connection.//
	92	+ ✓** SOLID RED:** Device doesn't have an Internet connection.
89	89
90		-(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
	94	+(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
91	91
92	92
93		-== **1.6 Button Intruction** ==
	97	+== 1.6 Button Intruction ==
94	94
95	95
96	96	LG01-V2 has a black toggle button, which is:
97	97
98	98
99		-(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
	103	+(% style="color:blue" %)**➢ Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
100	100
101		- // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
	105	+ **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
102	102
103	103
104		-(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
	108	+(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
105	105
106		- //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
	110	+ **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
107	107
108	108
109		-= **2. Quick Start** =
	113	+= 2. Quick Start =
110	110
111	111
112	112	The LG01-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
...	...	@@ -114,12 +114,12 @@
114	114	In most cases, the first thing you need to do is make the LG01-v2 accessible to the network.
115	115
116	116
117		-== **2.1 Connects to the network and accesses the gateway Web UI** ==
	121	+== 2.1 Connects to the network and accesses the gateway Web UI ==
118	118
119		-== **2.1.1 connect the network.** ==
	123	+=== 2.1.1 connect the network. ===
120	120
121	121
122		-=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
	126	+==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
123	123
124	124
125	125	Connect the LG01-V2 Ethernet port to your router and LG01-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01-V2.
...	...	@@ -129,10 +129,38 @@
129	129
130	130	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100129-1.png?width=1263&height=332&rev=1.1||alt="image-20220622100129-1.png"]]
131	131
	136	+==== (% style="color:blue" %)**Method 2**(%%):  Connect via LG01v2 Fallback IP ====
132	132
133		-=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
	138	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230107084650-2.png?width=839&height=310&rev=1.1||alt="image-20230107084650-2.png" height="284" width="769"]]
134	134
135	135
	141	+**Steps to connect via fallback IP:**
	142	+
	143	+~1. Connect the PC's Ethernet port to LG01v2's WAN port
	144	+
	145	+2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
	146	+
	147	+**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
	148	+
	149	+
	150	+As in the below photo:
	151	+
	152	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413172038-1.png?width=1243&height=732&rev=1.1||alt="image-20230413172038-1.png" height="624" width="1059"]]
	153	+
	154	+
	155	+Configure computer Ethernet port steps video: **[[fallback ip.mp4>>url:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/fallback%20ip.mp4?rev=1.1]]**
	156	+
	157	+If you still can't access the LG01v2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/LG01v2/#H10.1A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
	158	+
	159	+3. In the PC, use IP address 172.31.255.254 to access the LG01v2 via Web or Console.
	160	+
	161	+[[image:image-20230506115438-13.png||height="554" width="1047"]]
	162	+
	163	+
	164	+
	165	+==== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ====
	166	+
	167	+
136	136	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100542-2.png?width=1256&height=369&rev=1.1||alt="image-20220622100542-2.png"]]
137	137
138	138
...	...	@@ -139,68 +139,111 @@
139	139	Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
140	140
141	141
142		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102702-6.png?rev=1.1||alt="image-20220622102702-6.png"]]
	174	+[[image:image-20230506113332-2.png]]
143	143
144	144
145	145	**Wi-Fi configuration successful**
146	146
147	147
148		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102847-7.png?rev=1.1||alt="image-20220622102847-7.png"]]
	180	+[[image:image-20230506113432-3.png||height="397" width="855"]]
149	149
150	150
151		-= **3. Web Configure Pages** =
	183	+=== 2.1.2 Access Configure Web UI ===
152	152
153		-== **3.1 Home** ==
154	154
	186	+**Web Interface**
155	155
156		-//Shows the system running status~://
	188	+Open a browser on the PC and type the LG01v2 ip address (depends on your connect method)
157	157
158		-[[image:image-20221104155612-1.png||height="497" width="942"]]
159	159
	191	+[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
160	160
161		-== **3.2 Network Settings** ==
	193	+You will see the login interface of LG01v2 as shown below.
162	162
163		-=== **3.2.1 Network ~-~-> WiFi** ===
	195	+The account details for Web Login are:
164	164
	197	+(% style="color:#4f81bd" %)**User Name: root**
165	165
166		-[[image:image-20221104155654-2.png||height="319" width="813"]]
	199	+(% style="color:#4f81bd" %)**Password:   dragino**
167	167
	201	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230106153501-1.png?width=894&height=367&rev=1.1||alt="image-20230106153501-1.png"]]
168	168
169		-=== **3.4.2 Network ~-~-> System Status** ===
170	170
	204	+= 3. Web Configure Pages =
171	171
172		-[[image:image-20221104155724-3.png||height="679" width="861"]]
	206	+== 3.1 Home ==
173	173
174	174
175		-=== **3.4.3 Network ~-~-> Firewall** ===
	209	+Shows the system running status:
176	176
	211	+[[image:image-20230506113531-4.png||height="430" width="818"]]
177	177
178		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616115351-6.png?width=661&height=244&rev=1.1||alt="image-20220616115351-6.png"]]
179	179
	214	+== 3.2 Network Settings ==
180	180
181		-== **3.5 System** ==
	216	+=== 3.2.1 Network ~-~-> WiFi ===
182	182
183		-=== **3.5.1  System ~-~-> System Overview** ===
184	184
	219	+[[image:image-20230506113602-5.png]]
185	185
	221	+
	222	+=== 3.4.2 Network ~-~-> System Status ===
	223	+
	224	+
	225	+[[image:image-20230506113623-6.png||height="511" width="672"]]
	226	+
	227	+
	228	+== 3.5 System ==
	229	+
	230	+=== 3.5.1  System ~-~-> System Overview ===
	231	+
	232	+
186	186	Shows the system info:
187	187
188		-[[image:image-20221104155907-4.png]]
	235	+[[image:image-20230506113705-7.png]]
189	189
190	190
191		-=== **3.5.2 System ~-~-> Backup/Restore** ===
	238	+=== 3.5.2 System ~-~-> Backup/Restore ===
192	192
193	193
194		-[[image:image-20221104155928-5.png||height="334" width="880"]]
	241	+[[image:image-20230506113722-8.png||height="254" width="797"]]
195	195
196	196
197		-= (% id="cke_bm_1978S" style="display:none" %)** **(%%)**4. Build in Server** =
	244	+=== 3.5.3 System ~-~-> System General ===
198	198
199	199
	247	+In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
	248	+
	249	+In addition, Users can customize the FallBack IP address.
	250	+
	251	+[[image:image-20230506113813-10.png||height="659" width="749"]]
	252	+
	253	+
	254	+=== 3.5.4 System ~-~-> Remoteit ===
	255	+
	256	+
	257	+In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
	258	+
	259	+the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
	260	+
	261	+[[image:image-20230506113831-11.png||height="567" width="748"]]
	262	+
	263	+
	264	+=== 3.5.5 System ~-~-> Package Management ===
	265	+
	266	+
	267	+In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
	268	+
	269	+[[image:image-20230506114127-12.png||height="803" width="762"]]
	270	+
	271	+
	272	+= (% id="cke_bm_1978S" style="display:none" %) (%%)4. Build in Server =
	273	+
	274	+
200	200	The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
201	201
202	202
203		-[[image:image-20221104155949-6.png||height="315" width="1023"]]
	278	+[[image:image-20230506113737-9.png]]
204	204
205	205
206	206	(% style="color:red" %)**Note:**
...	...	@@ -215,7 +215,7 @@
215	215	For the Node-Red, you can use the local IP address and the port is 1880 to access it.
216	216
217	217
218		-== **4.1 Application Server ~-~- Node-Red** ==
	293	+== 4.1 Application Server ~-~- Node-Red ==
219	219
220	220
221	221	You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
...	...	@@ -227,11 +227,24 @@
227	227	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
228	228
229	229
230		-= **5. How to configure the Lora Gateway** =
	305	+= 5. How to configure the Lora Gateway =
231	231
232		-== **5.1 Configure and Debug LoRa wireless of LG01v2** ==
	307	+== 5.1 Configure and Debug LoRa wireless of LG01v2 ==
233	233
234	234
	310	+First, the user needs to access the Linux console of LG01v2 via ssh
	311	+
	312	+**IP address:  (% style="color:blue" %)IP address of LG01v2(%%)**
	313	+
	314	+**Port:  (% style="color:blue" %)22(%%)**
	315	+
	316	+**User Name:   (% style="color:blue" %)root(%%)**
	317	+
	318	+**Password:  (% style="color:blue" %)dragino(default)(%%)**
	319	+
	320	+[[image:image-20230504100722-3.png||height="228" width="908"]]
	321	+
	322	+
235	235	Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**:
236	236
237	237	(% class="box infomessage" %)
...	...	@@ -279,9 +279,9 @@
279	279	)))
280	280
281	281
282		-== **5.2 Example: LG01v2** ==
	370	+== 5.2 Example: LG01v2 ==
283	283
284		-=== **5.2.1 Introduce for the example:** ===
	372	+=== 5.2.1 Introduce for the example: ===
285	285
286	286
287	287	[[image:image-20221104102736-3.png||height="282" width="723"]]
...	...	@@ -292,9 +292,11 @@
292	292	* **LA66 Shield + UNO + DHT11**: The UNO will get the temperature and humidity and broadcast the value via LoRa protocol.
293	293	* **LG01v2** : LG01v2 is set to listening the LoRa Channel which LA66 is broadcasting. When LG01v2 get the data from LA66, LG01v2 will plot the data in built-in IoT server.
294	294
295		-=== **5.2.2 Set Up LA66 Shield + UNO** ===
296	296
297	297
	385	+=== 5.2.2 Set Up LA66 Shield + UNO ===
	386	+
	387	+
298	298	==== **Set up LA66 Module** ====
299	299
300	300
...	...	@@ -374,7 +374,7 @@
374	374	[[image:image-20221108175113-9.png||height="556" width="998"]]
375	375
376	376
377		-=== **5.2.3 Set Up LG01v2** ===
	467	+=== 5.2.3 Set Up LG01v2 ===
378	378
379	379
380	380	Configure LG01v2 LoRa channel parameters so it can get data from LA66 Shield
...	...	@@ -395,11 +395,11 @@
395	395	AT+IQ=0,0  ~-~--> TX and RX InvertIQ
396	396	AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
397	397	AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
398		-AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode, RX window always open
	488	+AT+RXMOD=65535,2  ~-~-->  Rx Timeout and Reply mode, RX window always open**(0:No ACK, 1:Reply mode, 2:Send an ACK once got a message from another device. ACK Content is 0x00 FF )**
399	399	)))
400	400
401	401
402		-=== **5.2.4 Test result** ===
	492	+=== 5.2.4 Test result ===
403	403
404	404
405	405	After the above configuration is complete, users can send test simulation data to check whether the configuration is correct, In LA66 sheild serial console send:(% style="color:red" %)**(AT+SEND=1,hello world,2,3).**
...	...	@@ -416,12 +416,12 @@
416	416	[[image:image-20221108170314-3.png]]
417	417
418	418
419		-=== **5.2.5 Plot data chart in LG01v2** ===
	509	+=== 5.2.5 Plot data chart in LG01v2 ===
420	420
421	421
422	422	User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
423	423
424		-User can import this example in Node-Red: [[attach:Log-Temperature-Sensor-and-send-data-to-node-red.json||target="_blank"]]
	514	+User can import this example in Node-Red: [[attach:Log-Temperature-Sensor-and-send-data-to-Node-red.json||target="_blank"]]
425	425
426	426	[[image:image-20221108180334-10.png||height="651" width="1141"]]
427	427
...	...	@@ -433,7 +433,7 @@
433	433	[[image:image-20221108180458-11.png||height="402" width="1137"]]
434	434
435	435
436		-= (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**v(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
	526	+= (% style="color:inherit; font-family:inherit; font-size:29px" %)6. How users can access LG01(%%)v(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%) =
437	437
438	438
439	439	(% style="color:blue" %)**USB TTL to LG01v2  Connection:**
...	...	@@ -466,14 +466,15 @@
466	466	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
467	467
468	468
469		-= **7. OTA System Update** =
	559	+= 7. OTA System Update =
470	470
	561	+
471	471	LG01v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
472	472
473	473
474		-= **8. FAQ** =
	565	+= 8. FAQ =
475	475
476		-== **8.1 How does LG01v2 communicate with Lora shield (LoRa.h)** ==
	567	+== 8.1 How does LG01v2 communicate with Lora shield (LoRa.h) ==
477	477
478	478
479	479	This example describes how to use LG01v2, LoRa Shield to set up a LoRa network,
...	...	@@ -522,7 +522,7 @@
522	522	[[image:image-20221101162527-4.png]]
523	523
524	524
525		-== **8.2 How does LG01v2 communicate with Heltec LoRa Node** ==
	616	+== 8.2 How does LG01v2 communicate with Heltec LoRa Node ==
526	526
527	527
528	528	This example describes how to use LG01v2 and Heltec LoRa Node to set up a LoRa network,
...	...	@@ -563,18 +563,42 @@
563	563	[[image:image-20221112163119-4.png||height="808" width="560"]]
564	564
565	565
566		-= (% style="color:inherit; font-family:inherit; font-size:29px" %)**9. Supports**(%%) =
	657	+= 9. Trouble Shooting =
567	567
	659	+== 9.1  Fallback IP does not work, how can users check ==
568	568
	661	+
	662	+When the computer has completed the above fallback IP configuration,the LG01v2 Web UI is still not accessible via fallback IP.
	663	+
	664	+
	665	+**1.Check whether the configuration is correct**
	666	+
	667	+Run the CMD command to ipconfig and ping 172.31.255.254.
	668	+
	669	+If this fails, the user needs to reconfigure.
	670	+
	671	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413170224-3.png?width=707&height=433&rev=1.1||alt="image-20230413170224-3.png"]]
	672	+
	673	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413170246-4.png?rev=1.1||alt="image-20230413170246-4.png"]]
	674	+
	675	+
	676	+**2. Check whether the firewall is disabled**
	677	+
	678	+If the firewall is not down, this will affect access to the gateway.
	679	+
	680	+
	681	+= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
	682	+
	683	+
569	569	(((
570		-**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
	685	+If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
571	571	)))
572	572
573	573	(((
574		-**//With your question as detailed as possible. We will reply and help you in the shortest.//**
	689	+With your question as detailed as possible. We will reply and help you in the shortest.
575	575
576	576
577		-= **10. Reference** =
	692	+= 11. Reference =
578	578
579	579
580	580	* Install Tago Core: Refer **Install Tago Core in LG01v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
...	...	@@ -583,7 +583,7 @@
583	583
584	584	)))
585	585
586		-= **11. Order Info** =
	701	+= 12. Order Info =
587	587
588	588
589	589	(% style="color:#0000ff" %)**LG01v2-XXX-YYY**
...	...	@@ -603,7 +603,7 @@
603	603	More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
604	604
605	605
606		-= **12. Manufacturer Info** =
	721	+= 13. Manufacturer Info =
607	607
608	608
609	609	**Shenzhen Dragino Technology Development co. LTD**
...	...	@@ -613,7 +613,7 @@
613	613	LongCheng Street, LongGang District ; Shenzhen 518116,China
614	614
615	615
616		-= **13. FCC Warning** =
	731	+= 14. FCC Warning =
617	617
618	618
619	619	(((

Log-Temperature-Sensor-and-send-data-to-Node-red.json

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+10.3 KB

Content

...	...	@@ -1,0 +1,443 @@
	1	+[
	2	+ {
	3	+ "id": "0a211e08511c4bdd",
	4	+ "type": "tab",
	5	+ "label": "serial USB",
	6	+ "disabled": false,
	7	+ "info": "",
	8	+ "env": []
	9	+ },
	10	+ {
	11	+ "id": "4a97eeb54bf57a6d",
	12	+ "type": "serial in",
	13	+ "z": "0a211e08511c4bdd",
	14	+ "name": "",
	15	+ "serial": "bb1c0e81fd51fa9e",
	16	+ "x": 210,
	17	+ "y": 60,
	18	+ "wires": [
	19	+ [
	20	+ "d2493fb9752dbcab",
	21	+ "d183c255973c979e"
	22	+ ]
	23	+ ]
	24	+ },
	25	+ {
	26	+ "id": "12f1eeb8049675c1",
	27	+ "type": "inject",
	28	+ "z": "0a211e08511c4bdd",
	29	+ "name": "AT+SEND=1,hello world,0,3",
	30	+ "props": [
	31	+ {
	32	+ "p": "payload"
	33	+ }
	34	+ ],
	35	+ "repeat": "",
	36	+ "crontab": "",
	37	+ "once": false,
	38	+ "onceDelay": 0.1,
	39	+ "topic": "",
	40	+ "payload": "AT+SEND=1,hello world,0,3",
	41	+ "payloadType": "str",
	42	+ "x": 220,
	43	+ "y": 260,
	44	+ "wires": [
	45	+ [
	46	+ "a5d2f5df63a2148e"
	47	+ ]
	48	+ ]
	49	+ },
	50	+ {
	51	+ "id": "a5d2f5df63a2148e",
	52	+ "type": "serial out",
	53	+ "z": "0a211e08511c4bdd",
	54	+ "name": "",
	55	+ "serial": "bb1c0e81fd51fa9e",
	56	+ "x": 540,
	57	+ "y": 260,
	58	+ "wires": []
	59	+ },
	60	+ {
	61	+ "id": "dc04c04a0bc0e5db",
	62	+ "type": "inject",
	63	+ "z": "0a211e08511c4bdd",
	64	+ "name": "",
	65	+ "props": [
	66	+ {
	67	+ "p": "payload"
	68	+ }
	69	+ ],
	70	+ "repeat": "",
	71	+ "crontab": "",
	72	+ "once": false,
	73	+ "onceDelay": 0.1,
	74	+ "topic": "",
	75	+ "payload": "ATZ",
	76	+ "payloadType": "str",
	77	+ "x": 290,
	78	+ "y": 320,
	79	+ "wires": [
	80	+ [
	81	+ "a5d2f5df63a2148e"
	82	+ ]
	83	+ ]
	84	+ },
	85	+ {
	86	+ "id": "3de96a220e28e8f0",
	87	+ "type": "inject",
	88	+ "z": "0a211e08511c4bdd",
	89	+ "name": "AT+FRE",
	90	+ "props": [
	91	+ {
	92	+ "p": "payload"
	93	+ }
	94	+ ],
	95	+ "repeat": "",
	96	+ "crontab": "",
	97	+ "once": false,
	98	+ "onceDelay": 0.1,
	99	+ "topic": "",
	100	+ "payload": "AT+FRE=868.100,868.100",
	101	+ "payloadType": "str",
	102	+ "x": 280,
	103	+ "y": 380,
	104	+ "wires": [
	105	+ [
	106	+ "a5d2f5df63a2148e"
	107	+ ]
	108	+ ]
	109	+ },
	110	+ {
	111	+ "id": "638725a47a1e4365",
	112	+ "type": "inject",
	113	+ "z": "0a211e08511c4bdd",
	114	+ "name": "AT+BW",
	115	+ "props": [
	116	+ {
	117	+ "p": "payload"
	118	+ }
	119	+ ],
	120	+ "repeat": "",
	121	+ "crontab": "",
	122	+ "once": false,
	123	+ "onceDelay": 0.1,
	124	+ "topic": "",
	125	+ "payload": "AT+BW=0,0",
	126	+ "payloadType": "str",
	127	+ "x": 290,
	128	+ "y": 440,
	129	+ "wires": [
	130	+ [
	131	+ "a5d2f5df63a2148e"
	132	+ ]
	133	+ ]
	134	+ },
	135	+ {
	136	+ "id": "85ba9868d1f3e82c",
	137	+ "type": "inject",
	138	+ "z": "0a211e08511c4bdd",
	139	+ "name": "AT+SF",
	140	+ "props": [
	141	+ {
	142	+ "p": "payload"
	143	+ }
	144	+ ],
	145	+ "repeat": "",
	146	+ "crontab": "",
	147	+ "once": false,
	148	+ "onceDelay": 0.1,
	149	+ "topic": "",
	150	+ "payload": "AT+SF=12,12",
	151	+ "payloadType": "str",
	152	+ "x": 290,
	153	+ "y": 500,
	154	+ "wires": [
	155	+ [
	156	+ "a5d2f5df63a2148e"
	157	+ ]
	158	+ ]
	159	+ },
	160	+ {
	161	+ "id": "144b2749013ffe57",
	162	+ "type": "inject",
	163	+ "z": "0a211e08511c4bdd",
	164	+ "name": "AT+RXMOD",
	165	+ "props": [
	166	+ {
	167	+ "p": "payload"
	168	+ }
	169	+ ],
	170	+ "repeat": "",
	171	+ "crontab": "",
	172	+ "once": false,
	173	+ "onceDelay": 0.1,
	174	+ "topic": "",
	175	+ "payload": "AT+RXMOD=65535,2",
	176	+ "payloadType": "str",
	177	+ "x": 270,
	178	+ "y": 560,
	179	+ "wires": [
	180	+ [
	181	+ "a5d2f5df63a2148e"
	182	+ ]
	183	+ ]
	184	+ },
	185	+ {
	186	+ "id": "bfb2e9df89dc5e2f",
	187	+ "type": "inject",
	188	+ "z": "0a211e08511c4bdd",
	189	+ "name": "AT+SYNCWORD",
	190	+ "props": [
	191	+ {
	192	+ "p": "payload"
	193	+ }
	194	+ ],
	195	+ "repeat": "",
	196	+ "crontab": "",
	197	+ "once": false,
	198	+ "onceDelay": 0.1,
	199	+ "topic": "",
	200	+ "payload": "AT+SYNCWORD=0",
	201	+ "payloadType": "str",
	202	+ "x": 260,
	203	+ "y": 620,
	204	+ "wires": [
	205	+ [
	206	+ "a5d2f5df63a2148e"
	207	+ ]
	208	+ ]
	209	+ },
	210	+ {
	211	+ "id": "d2493fb9752dbcab",
	212	+ "type": "function",
	213	+ "z": "0a211e08511c4bdd",
	214	+ "name": "function 1",
	215	+ "func": "var data = msg.payload\nif (data.substring(0, 4) == \"Data\") {\n if (data.substring(6, 12) == \"(HEX:)\") {\n var temp = data.substring(13, 15) + data.substring(16, 18)\n var hum = data.substring(19, 21) + data.substring(22, 24)\n var temp1 = parseInt(temp, 16) / 100\n var hum1 = parseInt(hum, 16) / 10\n var a1 = { payload: temp1 }, a2 = { payload: hum1 }\n }\n if (data.substring(6, 15) == \"(String:)\") {\n var temp = data.substring(20, 24)\n var hum = data.substring(29, 34)\n a1 = { payload: temp }, a2 = { payload: hum }\n }\n}\nif (data.substring(0, 4) == \"Rssi\") {\n var rssi = data.substring(6)\n var a3 = { payload: rssi }\n}\nreturn [a1, a2, a3];",
	216	+ "outputs": 3,
	217	+ "noerr": 0,
	218	+ "initialize": "",
	219	+ "finalize": "",
	220	+ "libs": [],
	221	+ "x": 420,
	222	+ "y": 60,
	223	+ "wires": [
	224	+ [
	225	+ "c17d94be4317ae6c"
	226	+ ],
	227	+ [
	228	+ "20c5b1c7f42fa6bb"
	229	+ ],
	230	+ [
	231	+ "39a8462f3d748eef"
	232	+ ]
	233	+ ]
	234	+ },
	235	+ {
	236	+ "id": "39a8462f3d748eef",
	237	+ "type": "ui_chart",
	238	+ "z": "0a211e08511c4bdd",
	239	+ "name": "",
	240	+ "group": "ef41b39771110fa5",
	241	+ "order": 1,
	242	+ "width": 0,
	243	+ "height": 0,
	244	+ "label": "RSSI",
	245	+ "chartType": "line",
	246	+ "legend": "false",
	247	+ "xformat": "dd HH:mm",
	248	+ "interpolate": "linear",
	249	+ "nodata": "",
	250	+ "dot": true,
	251	+ "ymin": "",
	252	+ "ymax": "",
	253	+ "removeOlder": 1,
	254	+ "removeOlderPoints": "",
	255	+ "removeOlderUnit": "3600",
	256	+ "cutout": 0,
	257	+ "useOneColor": false,
	258	+ "useUTC": false,
	259	+ "colors": [
	260	+ "#1f77b4",
	261	+ "#aec7e8",
	262	+ "#ff7f0e",
	263	+ "#2ca02c",
	264	+ "#98df8a",
	265	+ "#d62728",
	266	+ "#ff9896",
	267	+ "#9467bd",
	268	+ "#c5b0d5"
	269	+ ],
	270	+ "outputs": 1,
	271	+ "useDifferentColor": false,
	272	+ "className": "",
	273	+ "x": 670,
	274	+ "y": 180,
	275	+ "wires": [
	276	+ []
	277	+ ]
	278	+ },
	279	+ {
	280	+ "id": "c17d94be4317ae6c",
	281	+ "type": "ui_chart",
	282	+ "z": "0a211e08511c4bdd",
	283	+ "name": "",
	284	+ "group": "7e1d1c102cf74e6b",
	285	+ "order": 1,
	286	+ "width": 0,
	287	+ "height": 0,
	288	+ "label": "Temperature",
	289	+ "chartType": "line",
	290	+ "legend": "false",
	291	+ "xformat": "HH:mm:ss",
	292	+ "interpolate": "linear",
	293	+ "nodata": "",
	294	+ "dot": true,
	295	+ "ymin": "",
	296	+ "ymax": "",
	297	+ "removeOlder": 1,
	298	+ "removeOlderPoints": "",
	299	+ "removeOlderUnit": "3600",
	300	+ "cutout": 0,
	301	+ "useOneColor": false,
	302	+ "useUTC": false,
	303	+ "colors": [
	304	+ "#1f77b4",
	305	+ "#aec7e8",
	306	+ "#ff7f0e",
	307	+ "#2ca02c",
	308	+ "#98df8a",
	309	+ "#d62728",
	310	+ "#ff9896",
	311	+ "#9467bd",
	312	+ "#c5b0d5"
	313	+ ],
	314	+ "outputs": 1,
	315	+ "useDifferentColor": false,
	316	+ "className": "",
	317	+ "x": 690,
	318	+ "y": 100,
	319	+ "wires": [
	320	+ []
	321	+ ]
	322	+ },
	323	+ {
	324	+ "id": "20c5b1c7f42fa6bb",
	325	+ "type": "ui_chart",
	326	+ "z": "0a211e08511c4bdd",
	327	+ "name": "",
	328	+ "group": "3f5d139f158d7c1c",
	329	+ "order": 2,
	330	+ "width": 0,
	331	+ "height": 0,
	332	+ "label": "Humidity",
	333	+ "chartType": "line",
	334	+ "legend": "false",
	335	+ "xformat": "HH:mm:ss",
	336	+ "interpolate": "linear",
	337	+ "nodata": "",
	338	+ "dot": true,
	339	+ "ymin": "",
	340	+ "ymax": "",
	341	+ "removeOlder": 1,
	342	+ "removeOlderPoints": "",
	343	+ "removeOlderUnit": "3600",
	344	+ "cutout": 0,
	345	+ "useOneColor": false,
	346	+ "useUTC": false,
	347	+ "colors": [
	348	+ "#1f77b4",
	349	+ "#aec7e8",
	350	+ "#ff7f0e",
	351	+ "#2ca02c",
	352	+ "#98df8a",
	353	+ "#d62728",
	354	+ "#ff9896",
	355	+ "#9467bd",
	356	+ "#c5b0d5"
	357	+ ],
	358	+ "outputs": 1,
	359	+ "useDifferentColor": false,
	360	+ "className": "",
	361	+ "x": 680,
	362	+ "y": 140,
	363	+ "wires": [
	364	+ []
	365	+ ]
	366	+ },
	367	+ {
	368	+ "id": "d183c255973c979e",
	369	+ "type": "debug",
	370	+ "z": "0a211e08511c4bdd",
	371	+ "name": "debug 1",
	372	+ "active": true,
	373	+ "tosidebar": true,
	374	+ "console": false,
	375	+ "tostatus": false,
	376	+ "complete": "false",
	377	+ "statusVal": "",
	378	+ "statusType": "auto",
	379	+ "x": 420,
	380	+ "y": 180,
	381	+ "wires": []
	382	+ },
	383	+ {
	384	+ "id": "bb1c0e81fd51fa9e",
	385	+ "type": "serial-port",
	386	+ "serialport": "/dev/ttyUSB0",
	387	+ "serialbaud": "9600",
	388	+ "databits": "8",
	389	+ "parity": "none",
	390	+ "stopbits": "1",
	391	+ "waitfor": "",
	392	+ "dtr": "none",
	393	+ "rts": "none",
	394	+ "cts": "none",
	395	+ "dsr": "none",
	396	+ "newline": "\\n",
	397	+ "bin": "false",
	398	+ "out": "char",
	399	+ "addchar": "\\r\\n",
	400	+ "responsetimeout": "10000"
	401	+ },
	402	+ {
	403	+ "id": "ef41b39771110fa5",
	404	+ "type": "ui_group",
	405	+ "name": "rssi",
	406	+ "tab": "abb98f80600a5448",
	407	+ "order": 3,
	408	+ "disp": true,
	409	+ "width": "6",
	410	+ "collapse": false,
	411	+ "className": ""
	412	+ },
	413	+ {
	414	+ "id": "7e1d1c102cf74e6b",
	415	+ "type": "ui_group",
	416	+ "name": "TEM",
	417	+ "tab": "abb98f80600a5448",
	418	+ "order": 4,
	419	+ "disp": true,
	420	+ "width": "6",
	421	+ "collapse": false,
	422	+ "className": ""
	423	+ },
	424	+ {
	425	+ "id": "3f5d139f158d7c1c",
	426	+ "type": "ui_group",
	427	+ "name": "HUM",
	428	+ "tab": "abb98f80600a5448",
	429	+ "order": 2,
	430	+ "disp": true,
	431	+ "width": "6",
	432	+ "collapse": false,
	433	+ "className": ""
	434	+ },
	435	+ {
	436	+ "id": "abb98f80600a5448",
	437	+ "type": "ui_tab",
	438	+ "name": "LG01v2",
	439	+ "icon": "LG01v2",
	440	+ "disabled": false,
	441	+ "hidden": false
	442	+ }
	443	+]

image-20230504095457-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+412.6 KB

Content

image-20230504095502-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+412.6 KB

Content

image-20230504100722-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+21.5 KB

Content

image-20230506110646-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+383.1 KB

Content

image-20230506113332-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+28.6 KB

Content

image-20230506113432-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+36.5 KB

Content

image-20230506113531-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+403.2 KB

Content

image-20230506113602-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+26.7 KB

Content

image-20230506113623-6.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+35.4 KB

Content

image-20230506113705-7.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+40.9 KB

Content

image-20230506113722-8.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+33.2 KB

Content

image-20230506113737-9.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+25.2 KB

Content

image-20230506113813-10.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+39.5 KB

Content

image-20230506113831-11.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+32.2 KB

Content

image-20230506114127-12.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+56.1 KB

Content

image-20230506115438-13.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+413.6 KB

Content