Last modified by Kilight Cao on 2024/03/04 09:10
<
From version < 103.1 >
edited by Edwin Chen
on 2022/11/29 14:07
To version < 99.1 >
edited by Kilight Cao
on 2022/11/12 16:41
>
Change comment: Uploaded new attachment "LoRa_send_trial.ino", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Kilight
Content
... ... @@ -11,30 +11,23 @@
11 11  
12 12  {{toc/}}
13 13  
14 -
15 -
16 -
17 -
18 -
19 19  = **1. Introduction** =
20 20  
21 -== **1.1 What is LG01v2** ==
22 22  
17 +== **1.1 What is LG01-V2** ==
23 23  
19 +
24 24  (((
25 25  (((
26 -The LG01v2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 -
28 -LG01v2 is specially design for peer to peer LoRa protocol instead of LoRaWAN protocol. The LG01v2 use single channel LoRa module to minimize the deployment cost for a private p2p LoRa wireless network.
22 +The LG01-V2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
29 29  )))
30 30  
31 31  (((
32 -LG01v2 uses Open Source Linux system. User can modify the Linux part and develop customize software base on it. It has (% style="color:green" %)1.2Ghz Quad-Core CPU(%%) , (% style="color:green" %)4GB eMMC storage(%%) and (% style="color:green" %)512MB RAM(%%) for most application.
33 -
34 -LG01v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
26 +LG01-V2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
35 35  )))
36 36  
37 37  
30 +
38 38  == **1.2 Specifications** ==
39 39  
40 40  
... ... @@ -55,7 +55,6 @@
55 55  * Storage Temperature: -20 ~~ 65°C
56 56  * Power Input: 5V, 2A, DC
57 57  
58 -
59 59  == **1.3 Features** ==
60 60  
61 61  
... ... @@ -64,9 +64,9 @@
64 64  * Remote Management
65 65  * Auto-provisioning for batch deployment and management
66 66  * LoRa Gateway
59 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
67 67  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
68 68  
69 -
70 70  == **1.4 Block Diagram** ==
71 71  
72 72  
... ... @@ -92,6 +92,7 @@
92 92  (% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
93 93  
94 94  
87 +
95 95  == **1.6 Button Intruction** ==
96 96  
97 97  
... ... @@ -108,6 +108,7 @@
108 108   //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
109 109  
110 110  
104 +
111 111  = **2. Quick Start** =
112 112  
113 113  
... ... @@ -118,6 +118,7 @@
118 118  
119 119  == **2.1 Connects to the network and accesses the gateway Web UI** ==
120 120  
115 +
121 121  == **2.1.1 connect the network.** ==
122 122  
123 123  
... ... @@ -150,11 +150,11 @@
150 150  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102847-7.png?rev=1.1||alt="image-20220622102847-7.png"]]
151 151  
152 152  
148 +
153 153  = **3. Web Configure Pages** =
154 154  
155 155  == **3.1 Home** ==
156 156  
157 -
158 158  //Shows the system running status~://
159 159  
160 160  [[image:image-20221104155612-1.png||height="497" width="942"]]
... ... @@ -162,6 +162,7 @@
162 162  
163 163  == **3.2 Network Settings** ==
164 164  
160 +
165 165  === **3.2.1 Network ~-~-> WiFi** ===
166 166  
167 167  
... ... @@ -168,6 +168,7 @@
168 168  [[image:image-20221104155654-2.png||height="319" width="813"]]
169 169  
170 170  
167 +
171 171  === **3.4.2 Network ~-~-> System Status** ===
172 172  
173 173  
... ... @@ -174,6 +174,7 @@
174 174  [[image:image-20221104155724-3.png||height="679" width="861"]]
175 175  
176 176  
174 +
177 177  === **3.4.3 Network ~-~-> Firewall** ===
178 178  
179 179  
... ... @@ -180,8 +180,10 @@
180 180  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616115351-6.png?width=661&height=244&rev=1.1||alt="image-20220616115351-6.png"]]
181 181  
182 182  
181 +
183 183  == **3.5 System** ==
184 184  
184 +
185 185  === **3.5.1  System ~-~-> System Overview** ===
186 186  
187 187  
... ... @@ -190,6 +190,7 @@
190 190  [[image:image-20221104155907-4.png]]
191 191  
192 192  
193 +
193 193  === **3.5.2 System ~-~-> Backup/Restore** ===
194 194  
195 195  
... ... @@ -210,13 +210,15 @@
210 210   **Path**: System ~-~-> Built-in Server
211 211  
212 212  
213 -(% style="color:blue" %)**Troubleshooting：**
214 +**Troubleshooting:**
214 214  
216 +
215 215  **~ 1. URL does not jump properly**
216 216  
217 217   For the Node-Red, you can use the local IP address and the port is 1880 to access it.
218 218  
219 219  
222 +
220 220  == **4.1 Application Server ~-~- Node-Red** ==
221 221  
222 222  
... ... @@ -231,9 +231,10 @@
231 231  
232 232  = **5. How to configure the Lora Gateway** =
233 233  
234 -== **5.1 Configure and Debug LoRa wireless of LG01v2** ==
235 235  
238 +== **5.1 Access the Lora configuration page** ==
236 236  
240 +
237 237  Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**:
238 238  
239 239  (% class="box infomessage" %)
... ... @@ -254,9 +254,7 @@
254 254  )))
255 255  
256 256  
257 -(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**
258 -
259 -
261 +(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**(%%)
260 260  (% style="color:red" %)[[image:image-20221029174703-3.png]]
261 261  
262 262  
... ... @@ -265,45 +265,56 @@
265 265  
266 266  (% class="box infomessage" %)
267 267  (((
268 -**AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
269 -AT+GROUPMOD=0,0  ~-~-->  TX and RX group
270 -AT+BW=0,0  ~-~-->  TX and RX Bandwidth
271 -AT+SF=12,12  ~-~-->  TX and RX Spreading Factor
272 -AT+POWER=14  ~-~-->  TX Power Range
273 -AT+CRC=1,1  ~-~-->  TX and RX CRC Type
274 -AT+HEADER=0,0  ~-~-->  TX and RX Header Type
275 -AT+CR=1,1  ~-~-->  TX and RX Coding Rate
276 -AT+IQ=0,0  ~-~-->  TX and RX InvertIQ
277 -AT+PREAMBLE=8,8  ~-~-->  TX and RX Preamble Length
278 -AT+SYNCWORD=0  ~-~-->  Syncword(0: private，1: public)
279 -AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
280 -AT+RXDAFORM=1**                              
270 +AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
271 +AT+GROUPMOD=0,0  ~-~--> TX and RX group
272 +AT+BW=0,0  ~-~--> TX and RX Bandwidth
273 +AT+SF=12,12  ~-~--> TX and RX Spreading Factor
274 +AT+POWER=14  ~-~--> TX Power Range
275 +AT+CRC=1,1  ~-~--> TX and RX CRC Type
276 +AT+HEADER=0,0  ~-~--> TX and RX Header Type
277 +AT+CR=1,1  ~-~--> TX and RX Coding Rate
278 +AT+IQ=0,0  ~-~--> TX and RX InvertIQ
279 +AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length
280 +AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
281 +AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
282 +AT+RXDAFORM=1                              
281 281  )))
282 282  
283 283  
284 -== **5.2 Example: LG01v2** ==
286 +== **5.2 Example: LG01**-**V2 Peer-to-Peer** ==
285 285  
286 -=== **5.2.1 Introduce for the example:** ===
287 287  
288 -
289 289  [[image:image-20221104102736-3.png||height="282" width="723"]]
290 290  
291 291  
292 -In this example, there are two devices:
292 +The user can run the AT command to set the LG01-V2 RX window always open as a Receiver, The LG01-V2 can display the received data in the built-in server Node-Red, Here are the specific steps:
293 293  
294 -* **LA66 Shield + UNO + DHT11**: The UNO will get the temperature and humidity and broadcast the value via LoRa protocol.
295 -* **LG01v2** : LG01v2 is set to listening the LoRa Channel which LA66 is broadcasting. When LG01v2 get the data from LA66, LG01v2 will plot the data in built-in IoT server.
294 +(% style="color:red" %)**Prerequisites: **(%%)The configuration of LG01-V2 and  LA66 Shield must match and the LA66 Shield firmware is **[[LA66 Peer-to-Peer firmware>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]**, users can use **AT+CFG** to check all configurations.
296 296  
297 297  
298 -=== **5.2.2 Set Up LA66 Shield + UNO** ===
297 +=== **Log Temperature Sensor(DHT11) and send data to LG01-V2, show it in Node-RED.** ===
299 299  
300 300  
301 -==== **Set up LA66 Module** ====
300 +(% style="color:red; font-weight:bold" %)**LG01-V**(% style="color:red" %)**2 as Receiver: (configured as AT+RXMOD=65535,2)**
302 302  
302 +(% class="box infomessage" %)
303 +(((
304 +**LG01-V2 configuration:**
303 303  
304 -LA66 Module is loaded with the firmware **[[LA66 Peer-to-Peer firmware>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]] **and user can use AT Command to set up LA66 with below parameters:
306 +AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
307 +AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
308 +AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
309 +AT+POWER=14  ~-~--> TX Power Range set: 14dBm
310 +AT+CRC=1,1  ~-~--> TX and RX CRC Type
311 +AT+HEADER=0,0  ~-~--> TX and RX Header Type
312 +AT+CR=1,1  ~-~--> TX and RX Coding Rate
313 +AT+IQ=0,0  ~-~--> TX and RX InvertIQ
314 +AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
315 +AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
316 +AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode, RX window always open
317 +)))
305 305  
306 -(((
319 +
307 307  (% style="color:red" %)**LA66 Shield as Sender: **
308 308  
309 309  (% class="box infomessage" %)
... ... @@ -325,11 +325,18 @@
325 325  )))
326 326  
327 327  
341 +After the above configuration is complete, users can send test simulation data to check whether the configuration is correct, In LA66 sheild serial console send:(% style="color:red" %)**(AT+SEND=1,hello world,2,3).**
328 328  
329 -==== **Set up Arduino UNO** ====
343 +When LG01-V2 replies with ACK when it receives a packet sent by LA66 sheild.
330 330  
331 -(% id="cke_bm_1033249S" style="display:none" %)** **
345 +[[image:image-20221108164413-2.png]]
332 332  
347 +
348 +In the real-time log of LG01-V2：
349 +
350 +[[image:image-20221108170314-3.png]]
351 +
352 +
333 333  **Hardware Connection**
334 334  
335 335  (% class="box infomessage" %)
... ... @@ -344,17 +344,14 @@
344 344  [[image:image-20221108170731-5.png||height="588" width="441"]]
345 345  
346 346  
367 +==== **1. Open Arduino IDE** ====
347 347  
348 -===== **1. Open Arduino IDE** =====
349 -
350 -
351 351  [[image:image-20221108172149-6.png||height="650" width="542"]]
352 352  
353 353  
372 +==== **2. Open project** ====
354 354  
355 -===== **2. Open project** =====
356 356  
357 -
358 358  Users can download Arduino files from this link: [[attach:Log-Temperature-Sensor-and-send-data-to-Node-red.ino||target="_blank"]]
359 359  
360 360  Then click Compile and Upload to LA66 Shield,
... ... @@ -362,70 +362,21 @@
362 362  [[image:image-20221108172432-7.png]]
363 363  
364 364  
382 +==== **3. Open the Serial Monitor to check the LA66 Shield data** ====
365 365  
366 -===== **3. Open the Serial Monitor to check the LA66 Shield data** =====
367 367  
385 +The LA66 Shield reads the temperature and humidity data from the sensor and sends it to LG01-V2,
368 368  
369 -The UNO will now reads the temperature and humidity data from the sensor and broadcast it via LoRa wireless,
370 -
371 371  [[image:image-20221108174840-8.png||height="731" width="671"]]
372 372  
373 -
374 -
375 -Sending out data as below.
376 -
377 377  [[image:image-20221108175113-9.png||height="556" width="998"]]
378 378  
379 379  
380 -=== **5.2.3 Set Up LG01v2** ===
392 +==== **4. Import the flow to the built-in server on LG01-V2** ====
381 381  
382 382  
383 -Configure LG01v2 LoRa channel parameters so it can get data from LA66 Shield
395 +Users can import this example in Node-Red: [[attach:Log-Temperature-Sensor-and-send-data-to-node-red.json||target="_blank"]]
384 384  
385 -(% style="color:red; font-weight:bold" %)**LG01v**(% style="color:red" %)**2 as Receiver: (configured as AT+RXMOD=65535,2)**
386 -
387 -(% class="box infomessage" %)
388 -(((
389 -**LG01-V2 configuration:**
390 -
391 -AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
392 -AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
393 -AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
394 -AT+POWER=14  ~-~--> TX Power Range set: 14dBm
395 -AT+CRC=1,1  ~-~--> TX and RX CRC Type
396 -AT+HEADER=0,0  ~-~--> TX and RX Header Type
397 -AT+CR=1,1  ~-~--> TX and RX Coding Rate
398 -AT+IQ=0,0  ~-~--> TX and RX InvertIQ
399 -AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
400 -AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
401 -AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode, RX window always open
402 -)))
403 -
404 -
405 -=== **5.2.4 Test result** ===
406 -
407 -
408 -After the above configuration is complete, users can send test simulation data to check whether the configuration is correct, In LA66 sheild serial console send:(% style="color:red" %)**(AT+SEND=1,hello world,2,3).**
409 -)))
410 -
411 -When LG01v2 replies with ACK when it receives a packet sent by LA66 sheild.
412 -
413 -[[image:image-20221108164413-2.png]]
414 -
415 -
416 -
417 -In the real-time log of LG01v2：
418 -
419 -[[image:image-20221108170314-3.png]]
420 -
421 -
422 -=== **5.2.5 Plot data chart in LG01v2** ===
423 -
424 -
425 -User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
426 -
427 -User can import this example in Node-Red: [[attach:Log-Temperature-Sensor-and-send-data-to-node-red.json||target="_blank"]]
428 -
429 429  [[image:image-20221108180334-10.png||height="651" width="1141"]]
430 430  
431 431  
... ... @@ -436,7 +436,7 @@
436 436  [[image:image-20221108180458-11.png||height="402" width="1137"]]
437 437  
438 438  
439 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**v(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
407 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**-V(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
440 440  
441 441  
442 442  (% style="color:blue" %)**USB TTL to LG01-V2  Connection:**
... ... @@ -465,16 +465,16 @@
465 465  
466 466  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
467 467  
468 -
469 469  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
470 470  
471 471  
472 472  = **7. FAQ** =
473 473  
441 +
474 474  == **7.1 How does LG01-V2 communicate with Lora shield (LoRa.h)** ==
475 475  
476 476  
477 -This example describes how to use LG01-V2, LoRa Shield to set up a LoRa network,
445 +This example describes how to use LG01-V2, LoRa Shield to set up a LoRa network
478 478  
479 479  [[image:image-20221103152238-8.png||height="251" width="654"]]
480 480  
... ... @@ -499,8 +499,6 @@
499 499  AT+RXDAFORM=1    
500 500  )))
501 501  
502 -
503 -
504 504  **Lora shield configuration:**
505 505  
506 506  Lora Shield example: [[attach:LoRa_Shield_Sketch_For_MQTT.ino||target="_blank"]] , [[attach:arduino-LoRa-master.zip||target="_blank"]]
... ... @@ -508,59 +508,16 @@
508 508  [[image:image-20221101161318-2.png]]
509 509  
510 510  
511 -
512 512  **Test LG01-V2 to receive Lora Shield data:**
513 513  
514 514  [[image:image-20221101161951-3.png]]
515 515  
516 516  
517 -
518 518  **Test the LG01-V2 to send data:**
519 519  
520 520  [[image:image-20221101162527-4.png]]
521 521  
522 522  
523 -== **7.2 How does LG01-V2 communicate with Heltec LoRa Node** ==
524 -
525 -
526 -This example describes how to use LG01-V2 and Heltec LoRa Node to set up a LoRa network,
527 -
528 -[[image:image-20221112161111-2.png||height="258" width="692"]]
529 -
530 -(% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
531 -
532 -
533 -**LG01-V2 configuration:**
534 -
535 -(% class="box infomessage" %)
536 -(((
537 -AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
538 -AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
539 -AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
540 -AT+POWER=14  ~-~--> TX Power Range
541 -AT+CRC=1,1  ~-~--> TX and RX CRC Type
542 -AT+HEADER=0,0  ~-~--> TX and RX Header Type
543 -AT+CR=1,1  ~-~--> TX and RX Coding Rate
544 -AT+IQ=0,0  ~-~--> TX and RX InvertIQ
545 -AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
546 -AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
547 -AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode,RX window always open
548 -AT+RXDAFORM=1  ~-~--> RX data format**（0: Hex ,1: String）**
549 -)))
550 -
551 -
552 -After we upload the sketch to Heltec LoRa Node, we can see below output from Arduino.
553 -
554 -Lora Shield example: [[attach:LoRa_send_trial.ino||target="_blank"]]
555 -
556 -[[image:image-20221112162733-3.png||height="524" width="927"]]
557 -
558 -
559 -And we can see the logread of gateway as below, means the packet arrive gateway:
560 -
561 -[[image:image-20221112163119-4.png||height="808" width="560"]]
562 -
563 -
564 564  = (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
565 565  
566 566  
... ... @@ -572,6 +572,7 @@
572 572  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
573 573  
574 574  
498 +
575 575  = **9. Reference** =
576 576  
577 577  
... ... @@ -605,6 +605,7 @@
605 605  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
606 606  
607 607  
532 +
608 608  = **10. Manufacturer Info** =
609 609  
610 610  
... ... @@ -615,6 +615,7 @@
615 615  LongCheng Street, LongGang District ; Shenzhen 518116,China
616 616  
617 617  
543 +
618 618  = **11. FCC Warning** =
619 619  
620 620  
... ... @@ -647,6 +647,7 @@
647 647  (((
648 648  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
649 649  
650 -
651 651  
652 652  )))
578 +
579 +~)~)~)

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0