Last modified by Kilight Cao on 2024/10/12 08:58
<
From version < 102.1 >
edited by Edwin Chen
on 2022/11/14 19:41
To version < 59.1 >
edited by Kilight Cao
on 2022/11/03 15:20
>
Change comment: Uploaded new attachment "image-20221103152033-7.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Kilight
Content
... ... @@ -14,16 +14,16 @@
14 14  = **1. Introduction** =
15 15  
16 16  
17 -== **1.1 What is LG01-V2** ==
17 +== **1.1 What is LG01v2** ==
18 18  
19 19  
20 20  (((
21 21  (((
22 -The LG01-V2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
22 +The LG01v2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
23 23  )))
24 24  
25 25  (((
26 -LG01-V2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
26 +LG01v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
27 27  )))
28 28  
29 29  
... ... @@ -88,7 +88,7 @@
88 88  == **1.6 Button Intruction** ==
89 89  
90 90  
91 -LG01-V2 has a black toggle button, which is:
91 +LG01v2 has a black toggle button, which is:
92 92  
93 93  
94 94  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
... ... @@ -119,7 +119,7 @@
119 119  === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
120 120  
121 121  
122 -Connect the LG01-V2 Ethernet port to your router and LG01-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01-V2.
122 +Connect the LG01v2 Ethernet port to your router and LG01v2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01v2.
123 123  
124 124  You can also use this IP to connect.
125 125  
... ... @@ -132,7 +132,25 @@
132 132  
133 133  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100542-2.png?width=1256&height=369&rev=1.1||alt="image-20220622100542-2.png"]]
134 134  
135 +The LG01v2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
135 135  
137 +
138 +(% style="color:#037691" %)**Steps to connect via fallback IP:**
139 +
140 +~1. Connect PC's Ethernet port to LG01-V2's WAN port
141 +
142 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
143 +
144 +
145 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622101433-4.png?rev=1.1||alt="image-20220622101433-4.png"]]
146 +
147 +
148 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LG01-V2 via Web or Console.
149 +
150 +
151 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102210-5.png?width=919&height=504&rev=1.1||alt="image-20220622102210-5.png"]]
152 +
153 +
136 136  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
137 137  
138 138  
... ... @@ -144,6 +144,7 @@
144 144  
145 145  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102847-7.png?rev=1.1||alt="image-20220622102847-7.png"]]
146 146  
165 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?width=938&height=476&rev=1.1||alt="image-20220622102901-8.png"]]
147 147  
148 148  
149 149  = **3. Web Configure Pages** =
... ... @@ -152,7 +152,7 @@
152 152  
153 153  //Shows the system running status~://
154 154  
155 -[[image:image-20221104155612-1.png||height="497" width="942"]]
174 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
156 156  
157 157  
158 158  == **3.2 Network Settings** ==
... ... @@ -161,7 +161,7 @@
161 161  === **3.2.1 Network ~-~-> WiFi** ===
162 162  
163 163  
164 -[[image:image-20221104155654-2.png||height="319" width="813"]]
183 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616114756-4.png?width=669&height=251&rev=1.1||alt="image-20220616114756-4.png"]]
165 165  
166 166  
167 167  
... ... @@ -168,7 +168,7 @@
168 168  === **3.4.2 Network ~-~-> System Status** ===
169 169  
170 170  
171 -[[image:image-20221104155724-3.png||height="679" width="861"]]
190 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820134112-2.png?width=668&height=539&rev=1.1||alt="image-20220820134112-2.png"]]
172 172  
173 173  
174 174  
... ... @@ -187,7 +187,7 @@
187 187  
188 188  Shows the system info:
189 189  
190 -[[image:image-20221104155907-4.png]]
209 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220917144512-5.png?width=853&height=618&rev=1.1||alt="image-20220917144512-5.png"]]
191 191  
192 192  
193 193  
... ... @@ -194,52 +194,18 @@
194 194  === **3.5.2 System ~-~-> Backup/Restore** ===
195 195  
196 196  
197 -[[image:image-20221104155928-5.png||height="334" width="880"]]
216 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220917144725-6.png?width=869&height=208&rev=1.1||alt="image-20220917144725-6.png"]]
198 198  
199 199  
200 -= (% id="cke_bm_1978S" style="display:none" %)** **(%%)**4. Build in Server** =
201 201  
220 += **4. How to configure the Lora Gateway** =
202 202  
203 -The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
204 204  
223 +== **4.1 Access the Lora configuration page** ==
205 205  
206 -[[image:image-20221104155949-6.png||height="315" width="1023"]]
207 207  
226 +Users can access the LA66 module by running the following command, then select the option **''serial port setup"**:
208 208  
209 -(% style="color:red" %)**Note:**
210 -
211 - **Path**: System ~-~-> Built-in Server
212 -
213 -
214 -**Troubleshooting:**
215 -
216 -
217 -**~ 1. URL does not jump properly**
218 -
219 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
220 -
221 -
222 -
223 -== **4.1 Application Server ~-~- Node-Red** ==
224 -
225 -
226 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
227 -
228 -
229 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
230 -
231 -
232 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
233 -
234 -
235 -= **5. How to configure the Lora Gateway** =
236 -
237 -
238 -== **5.1 Configure and Debug LoRa wireless of LG01v2** ==
239 -
240 -
241 -Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**:
242 -
243 243  (% class="box infomessage" %)
244 244  (((
245 245  **root@dragino-2406ef:~~# minicom -s**
... ... @@ -283,155 +283,75 @@
283 283  )))
284 284  
285 285  
286 -== **5.2 Example: LG01v2** ==
271 +== **4.2 Example: LG01v2 Peer-to-Peer** ==
287 287  
288 -=== **5.2.1 Introduce for the example:** ===
289 289  
290 -[[image:image-20221104102736-3.png||height="282" width="723"]]
291 291  
275 +[[image:image-20221103143618-5.png||height="274" width="612"]]
292 292  
293 -In this example, there are two devices:
294 294  
295 -* **LA66 Shield + UNO + DHT11**: The UNO will get the temperature and humidity and broadcast the value via LoRa protocol.
296 -* **LG01v2** : LG01v2 is set to listening the LoRa Channel which LA66 is broadcasting. When LG01v2 get the data from LA66, LG01v2 will plot the data in built-in IoT server.
278 +The user can run the AT command to set the LG01v2 RX window always open as a Receiver, the LA66 Shield uses **AT+SEND=1,hello world,2,3** to simulate sending data,
297 297  
298 -=== 5.2.2 Set Up LA66 Shield + UNO ===
280 +**Prerequisites: **The configuration of LG01v2 and  LA66 Shield must match, users can use **AT+CFG** to check all configurations.
299 299  
300 300  
301 -==== **Set up LA66 Module** ====
283 +(% style="color:red" %)**LG01v2 as Receiver: (configured as AT+RXMOD=65535,2)**
302 302  
303 -LA66 Module is loaded with the firmware **[[LA66 Peer-to-Peer firmware>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]] **and user can use AT Command to set up LA66 with below parameters:
285 +[[image:image-20221102140053-4.png]]
304 304  
305 -(((
306 -(% style="color:red" %)**LA66 Shield as Sender: **
307 307  
308 -(% class="box infomessage" %)
309 -(((
310 -**LA66 Shield configuration:**
288 +(% style="color:red" %)**LA66 Shield as Sender: (AT+SEND=1,hello world,2,3)**
311 311  
312 -AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
313 -AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
314 -AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
315 -AT+POWER=14  ~-~--> TX Power Range set: 14dBm
316 -AT+CRC=1,1  ~-~--> TX and RX CRC Type
317 -AT+HEADER=0,0  ~-~--> TX and RX Header Type
318 -AT+CR=1,1  ~-~--> TX and RX Coding Rate
319 -AT+IQ=0,0  ~-~--> TX and RX InvertIQ
320 -AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
321 -AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
322 -AT+RXMOD=6,0  ~-~-->  Rx Timeout and Reply mode
323 -)))
324 -)))
290 +[[image:1667456058832-484.png||height="291" width="353"]]
325 325  
326 326  
327 -==== **Set up Arduino UNO** ====
328 -
329 -(% id="cke_bm_1033249S" style="display:none" %)** **(%%)**Hardware Connection**
330 -
331 -(% class="box infomessage" %)
332 -(((
333 -**The DHT11 sensor connects to the LA66 Shield:**
334 -
335 -**VCC  <~-~--> 3.3V (Red line)**
336 -**DATA <~-~--> PIN8 (Purple line)**
337 -**GND  <~-~--> GND (White line)**
293 +Instruction for Peer-to-Peer firmware:[[ **Instruction **>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]
338 338  )))
339 339  
340 -[[image:image-20221108170731-5.png||height="588" width="441"]]
341 341  
297 += **5. Build in Server** =
342 342  
343 -===== **1. Open Arduino IDE** =====
344 344  
345 -[[image:image-20221108172149-6.png||height="650" width="542"]]
300 +The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
346 346  
347 347  
348 -===== **2. Open project** =====
303 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820115644-1.png?width=778&height=217&rev=1.1||alt="image-20220820115644-1.png"]]
349 349  
350 -Users can download Arduino files from this link: [[attach:Log-Temperature-Sensor-and-send-data-to-Node-red.ino||target="_blank"]]
351 351  
352 -Then click Compile and Upload to LA66 Shield,
306 +(% style="color:red" %)**Note:**
353 353  
354 -[[image:image-20221108172432-7.png]]
308 + **Path**: System ~-~-> Built-in Server
355 355  
356 356  
357 -===== **3. Open the Serial Monitor to check the LA66 Shield data** =====
311 +**Troubleshooting:**
358 358  
359 -The UNO will now reads the temperature and humidity data from the sensor and broadcast it via LoRa wireless,
360 360  
361 -[[image:image-20221108174840-8.png||height="731" width="671"]]
314 +**~ 1. URL does not jump properly**
362 362  
316 + For the Node-Red, you can use the local IP address and the port is 1880 to access it.
363 363  
364 -Sending out data as below.
365 365  
366 -[[image:image-20221108175113-9.png||height="556" width="998"]]
367 367  
320 +== **5.1 Application Server ~-~- Node-Red** ==
368 368  
369 369  
370 -=== 5.2.3 Set Up LG01v2 ===
323 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
371 371  
372 372  
373 -Configure LG01v2 LoRa channel parameters so it can get data from LA66 Shield
326 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
374 374  
375 -(% style="color:red; font-weight:bold" %)**LG01v**(% style="color:red" %)**2 as Receiver: (configured as AT+RXMOD=65535,2)**
376 376  
377 -(% class="box infomessage" %)
378 -(((
379 -**LG01-V2 configuration:**
329 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
380 380  
381 -AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
382 -AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
383 -AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
384 -AT+POWER=14  ~-~--> TX Power Range set: 14dBm
385 -AT+CRC=1,1  ~-~--> TX and RX CRC Type
386 -AT+HEADER=0,0  ~-~--> TX and RX Header Type
387 -AT+CR=1,1  ~-~--> TX and RX Coding Rate
388 -AT+IQ=0,0  ~-~--> TX and RX InvertIQ
389 -AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
390 -AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
391 -AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode, RX window always open
392 -)))
393 393  
332 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01v2 using serial USB**(%%) =
394 394  
395 -=== 5.2.4 Test result ===
396 396  
397 -After the above configuration is complete, users can send test simulation data to check whether the configuration is correct, In LA66 sheild serial console send:(% style="color:red" %)**(AT+SEND=1,hello world,2,3).**
398 -)))
335 +(% style="color:blue" %)**USB TTL to LG01v2  Connection:**
399 399  
400 -When LG01v2 replies with ACK when it receives a packet sent by LA66 sheild.
401 401  
402 -[[image:image-20221108164413-2.png]]
338 +Port 1 of the UART on the LG01v2 is GND
403 403  
404 -
405 -In the real-time log of LG01v2：
406 -
407 -[[image:image-20221108170314-3.png]]
408 -
409 -
410 -=== **5.2.5 Plot data chart in LG01v2** ===
411 -
412 -
413 -User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
414 -
415 -User can import this example in Node-Red: [[attach:Log-Temperature-Sensor-and-send-data-to-node-red.json||target="_blank"]]
416 -
417 -[[image:image-20221108180334-10.png||height="651" width="1141"]]
418 -
419 -
420 -The temperature and humidity chart is displayed in the built-in node-red UI
421 -
422 -**Browser input: (% style="background-color:yellow" %)__//http:~/~/<local-IPV4-address>//__(%%)**
423 -
424 -[[image:image-20221108180458-11.png||height="402" width="1137"]]
425 -
426 -
427 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**v(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
428 -
429 -
430 -(% style="color:blue" %)**USB TTL to LG01-V2  Connection:**
431 -
432 -
433 -Port 1 of the UART on the LG01-V2 is GND
434 -
435 435  (% class="box infomessage" %)
436 436  (((
437 437  **TXD  <~-~--> UART RXD (Gray line)**
... ... @@ -442,7 +442,7 @@
442 442  )))
443 443  
444 444  
445 -**LG01-V2 UART connection photo**
350 +**LG01v2 UART connection photo**
446 446  
447 447  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
448 448  
... ... @@ -459,17 +459,17 @@
459 459  = **7. FAQ** =
460 460  
461 461  
462 -== **7.1 How does LG01-V2 communicate with Lora shield (LoRa.h)** ==
367 +== **7.1 How does LG01v2 communicate with Lora shield (LoRa.h)** ==
463 463  
464 464  
465 -This example describes how to use LG01-V2, LoRa Shield to set up a LoRa network,
370 +This example describes how to use LG01v2, LoRa Shield to set up a LoRa network
466 466  
467 -[[image:image-20221103152238-8.png||height="251" width="654"]]
372 +[[image:image-20221103144405-6.png||height="253" width="712"]]
468 468  
469 469  
470 -(% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
375 +(% style="color:red" %)**Prerequisites: The configurations of LG01v2 and Lora shield must match**
471 471  
472 -**LG01-V2 configuration:**
377 +**LG01v2 configuration:**
473 473  
474 474  (% class="box infomessage" %)
475 475  (((
... ... @@ -494,54 +494,16 @@
494 494  [[image:image-20221101161318-2.png]]
495 495  
496 496  
497 -**Test LG01-V2 to receive Lora Shield data:**
402 +**Test LG01v2 to receive Lora Shield data:**
498 498  
499 499  [[image:image-20221101161951-3.png]]
500 500  
501 501  
502 -**Test the LG01-V2 to send data:**
407 +**Test the LG01v2 to send data:**
503 503  
504 504  [[image:image-20221101162527-4.png]]
505 505  
506 506  
507 -== **7.2 How does LG01-V2 communicate with Heltec LoRa Node** ==
508 -
509 -
510 -This example describes how to use LG01-V2 and Heltec LoRa Node to set up a LoRa network,
511 -
512 -[[image:image-20221112161111-2.png||height="258" width="692"]]
513 -
514 -(% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
515 -
516 -**LG01-V2 configuration:**
517 -
518 -(% class="box infomessage" %)
519 -(((
520 -AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
521 -AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
522 -AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
523 -AT+POWER=14  ~-~--> TX Power Range
524 -AT+CRC=1,1  ~-~--> TX and RX CRC Type
525 -AT+HEADER=0,0  ~-~--> TX and RX Header Type
526 -AT+CR=1,1  ~-~--> TX and RX Coding Rate
527 -AT+IQ=0,0  ~-~--> TX and RX InvertIQ
528 -AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
529 -AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
530 -AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode,RX window always open
531 -AT+RXDAFORM=1  ~-~--> RX data format**（0: Hex ,1: String）**
532 -)))
533 -
534 -After we upload the sketch to Heltec LoRa Node, we can see below output from Arduino.
535 -
536 -Lora Shield example: [[attach:LoRa_send_trial.ino||target="_blank"]]
537 -
538 -[[image:image-20221112162733-3.png||height="524" width="927"]]
539 -
540 -
541 -And we can see the logread of gateway as below, means the packet arrive gateway:
542 -
543 -[[image:image-20221112163119-4.png||height="808" width="560"]]
544 -
545 545  = (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
546 546  
547 547  
LoRa_send_trial.ino
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -3.4 KB
Content
... ... @@ -1,124 +1,0 @@
1 -#include "LoRaWan_APP.h"
2 -#include "Arduino.h"
3 -
4 -
5 -#define RF_FREQUENCY 868100000 // Hz
6 -
7 -#define TX_OUTPUT_POWER 5 // dBm
8 -
9 -#define LORA_BANDWIDTH 0 // [0: 125 kHz,
10 - // 1: 250 kHz,
11 - // 2: 500 kHz,
12 - // 3: Reserved]
13 -#define LORA_SPREADING_FACTOR 12 // [SF7..SF12]
14 -#define LORA_CODINGRATE 1 // [1: 4/5,
15 - // 2: 4/6,
16 - // 3: 4/7,
17 - // 4: 4/8]
18 -#define LORA_PREAMBLE_LENGTH 8 // Same for Tx and Rx
19 -#define LORA_SYMBOL_TIMEOUT 0 // Symbols
20 -#define LORA_FIX_LENGTH_PAYLOAD_ON false
21 -#define LORA_IQ_INVERSION_ON false
22 -
23 -
24 -#define RX_TIMEOUT_VALUE 1000
25 -#define BUFFER_SIZE 30 // Define the payload size here
26 -
27 -float tem,hum;
28 -char tem_1[8]={"\0"},hum_1[8]={"\0"};
29 -char *node_id = "<GW01>"; //From LG01 via web Local Channel settings on MQTT.Please refer <> dataformat in here.
30 -
31 -char txpacket[BUFFER_SIZE];
32 -char rxpacket[BUFFER_SIZE];
33 -
34 -double txNumber;
35 -
36 -bool lora_idle=true;
37 -
38 -static RadioEvents_t RadioEvents;
39 -void OnTxDone( void );
40 -void OnTxTimeout( void );
41 -
42 -void dhtTem()
43 -{
44 - tem = random(15,40);
45 - hum = random(40,80);
46 - Serial.println(F("The temperature and humidity:"));
47 - Serial.print("[");
48 - Serial.print(tem);
49 - Serial.print("℃");
50 - Serial.print(",");
51 - Serial.print(hum);
52 - Serial.print("%");
53 - Serial.print("]");
54 - Serial.println("");
55 -}
56 -
57 -void dhtWrite()
58 -{
59 - char data[50] = "\0";
60 - for(int i = 0; i < 50; i++)
61 - {
62 - data[i] = node_id[i];
63 - }
64 -
65 - dtostrf(tem,0,1,tem_1);
66 - dtostrf(hum,0,1,hum_1);
67 -
68 - strcat(data,"tem_a=");
69 - strcat(data,tem_1);
70 - strcat(data,"&hum_a=");
71 - strcat(data,hum_1);
72 - strcpy((char *)txpacket,data);
73 -
74 - Serial.println((char *)txpacket);
75 -}
76 -
77 -void setup() {
78 - Serial.begin(115200);
79 - Mcu.begin();
80 -
81 - txNumber=0;
82 -
83 - RadioEvents.TxDone = OnTxDone;
84 - RadioEvents.TxTimeout = OnTxTimeout;
85 -
86 - Radio.Init( &RadioEvents );
87 - Radio.SetChannel( RF_FREQUENCY );
88 - Radio.SetTxConfig( MODEM_LORA, TX_OUTPUT_POWER, 0, LORA_BANDWIDTH,
89 - LORA_SPREADING_FACTOR, LORA_CODINGRATE,
90 - LORA_PREAMBLE_LENGTH, LORA_FIX_LENGTH_PAYLOAD_ON,
91 - true, 0, 0, LORA_IQ_INVERSION_ON, 3000 );
92 - }
93 -
94 -
95 -
96 -void loop()
97 -{
98 - if(lora_idle == true)
99 - {
100 - delay(5000);
101 - txNumber += 0.01;
102 - Serial.println(txNumber);
103 -
104 - dhtTem();
105 - dhtWrite();
106 - Radio.Send( (uint8_t *)txpacket, strlen(txpacket) ); //send the package out
107 - lora_idle = false;
108 - }
109 - Radio.IrqProcess( );
110 -}
111 -
112 -void OnTxDone( void )
113 -{
114 - Serial.println("TX done......");
115 - lora_idle = true;
116 -}
117 -
118 -void OnTxTimeout( void )
119 -{
120 - Radio.Sleep( );
121 - Serial.println("TX Timeout......");
122 - lora_idle = true;
123 -}
124 -
Log-Temperature-Sensor-and-send-data-to-Node-red.ino
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 KB
Content
... ... @@ -1,150 +1,0 @@
1 -#include <SoftwareSerial.h>
2 -#include <Adafruit_Sensor.h>
3 -#include <DHT.h>
4 -#include <DHT_U.h>
5 -/*
6 -
7 -*/
8 -#define DHTPIN 8 // Digital pin connected to the DHT sensor
9 -#define DHTTYPE DHT11 // DHT 11
10 -DHT_Unified dht(DHTPIN, DHTTYPE);
11 -
12 -String inputString = ""; // a String to hold incoming data
13 -bool stringComplete = false; // whether the string is complete
14 -
15 -long old_time=millis();
16 -long new_time;
17 -
18 -long uplink_interval=30000; //ms
19 -
20 -float DHT11_temp;
21 -float DHT11_hum;
22 -
23 -SoftwareSerial ss(10, 11); // Arduino RX, TX ,
24 -
25 -char rxbuff[128];
26 -uint8_t rxbuff_index=0;
27 -
28 -void setup() {
29 - // initialize serial
30 - Serial.begin(9600);
31 -
32 - ss.begin(9600);
33 - ss.listen();
34 -
35 - // reserve 200 bytes for the inputString:
36 - inputString.reserve(200);
37 -
38 - dht.begin();
39 - sensor_t sensor;
40 - dht.temperature().getSensor(&sensor);
41 - dht.humidity().getSensor(&sensor);
42 -
43 - ss.println("ATZ");//reset LA66
44 -}
45 -
46 -void loop() {
47 -
48 - while ( ss.available()) {
49 - // get the new byte:
50 - char inChar = (char) ss.read();
51 - // add it to the inputString:
52 - inputString += inChar;
53 -
54 - rxbuff[rxbuff_index++]=inChar;
55 -
56 - if(rxbuff_index>128)
57 - {
58 - rxbuff[rxbuff_index]='\0';
59 - rxbuff_index=0;
60 - break;
61 - }
62 -
63 - // if the incoming character is a newline, set a flag so the main loop can
64 - // do something about it:
65 - if (inChar == '\n' || inChar == '\r') {
66 - stringComplete = true;
67 - rxbuff[rxbuff_index]='\0';
68 - rxbuff_index=0;
69 - }
70 - }
71 -
72 - while ( Serial.available()) {
73 - // get the new byte:
74 - char inChar = (char) Serial.read();
75 - // add it to the inputString:
76 - inputString += inChar;
77 - // if the incoming character is a newline, set a flag so the main loop can
78 - // do something about it:
79 - if (inChar == '\n' || inChar == '\r') {
80 - ss.print(inputString);
81 - inputString = "\0";
82 - }
83 - }
84 -
85 - // print the string when a newline arrives:
86 - if (stringComplete) {
87 - Serial.print(inputString);
88 -
89 - // clear the string:
90 - inputString = "\0";
91 - stringComplete = false;
92 - }
93 -
94 - new_time = millis();
95 -
96 - if(new_time-old_time>=uplink_interval){
97 - old_time = new_time;
98 -
99 - Serial.print(F("\r\n"));
100 - // Get temperature event and print its value.
101 - sensors_event_t event;
102 - dht.temperature().getEvent(&event);
103 - if (isnan(event.temperature)) {
104 - Serial.println(F("Error reading temperature!"));
105 - DHT11_temp=327.67;
106 - }
107 - else {
108 - DHT11_temp=event.temperature;
109 -
110 - if(DHT11_temp>60){
111 - DHT11_temp=60;
112 - }
113 - else if(DHT11_temp<-20){
114 - DHT11_temp=-20;
115 - }
116 - }
117 - // Get humidity event and print its value.
118 - dht.humidity().getEvent(&event);
119 - if (isnan(event.relative_humidity)) {
120 - DHT11_hum=327.67;
121 - Serial.println(F("Error reading humidity!"));
122 - }
123 - else {
124 - DHT11_hum=event.relative_humidity;
125 -
126 - if(DHT11_hum>100){
127 - DHT11_hum=100;
128 - }
129 - else if(DHT11_hum<0){
130 - DHT11_hum=0;
131 - }
132 - }
133 -
134 - Serial.print(F("Temperature: "));
135 - Serial.print(DHT11_temp);
136 - Serial.println(F("°C"));
137 - Serial.print(F("Humidity: "));
138 - Serial.print(DHT11_hum);
139 - Serial.println(F("%"));
140 - Serial.print(F("\r\n"));
141 -
142 - char sensor_data_buff[128]="\0";
143 -
144 - //confirm status,Fport,payload length,payload(HEX)
145 - snprintf(sensor_data_buff,128,"AT+SEND=0,%02X%02X%02X%02X,0,0",(short)(DHT11_temp*100)>>8 & 0xFF,(short)(DHT11_temp*100) & 0xFF,(short)(DHT11_hum*10)>>8 & 0xFF,(short)(DHT11_hum*10) & 0xFF);
146 - ss.print(sensor_data_buff);
147 - ss.print('\r');
148 - }
149 -}
150 -
Log-Temperature-Sensor-and-send-data-to-node-red.json
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
... ... @@ -1,443 +1,0 @@
1 -[
2 - {
3 - "id": "5f10779accc05655",
4 - "type": "tab",
5 - "label": "serial USB",
6 - "disabled": false,
7 - "info": "",
8 - "env": []
9 - },
10 - {
11 - "id": "4ea60ce4df40717c",
12 - "type": "serial in",
13 - "z": "5f10779accc05655",
14 - "name": "",
15 - "serial": "bb1c0e81fd51fa9e",
16 - "x": 210,
17 - "y": 60,
18 - "wires": [
19 - [
20 - "40eac96a52733f7a",
21 - "79722a224bb22c96"
22 - ]
23 - ]
24 - },
25 - {
26 - "id": "fe5a93a52b6adcf1",
27 - "type": "inject",
28 - "z": "5f10779accc05655",
29 - "name": "AT+SEND=1,hello world,0,3",
30 - "props": [
31 - {
32 - "p": "payload"
33 - }
34 - ],
35 - "repeat": "",
36 - "crontab": "",
37 - "once": false,
38 - "onceDelay": 0.1,
39 - "topic": "",
40 - "payload": "AT+SEND=1,hello world,0,3",
41 - "payloadType": "str",
42 - "x": 220,
43 - "y": 260,
44 - "wires": [
45 - [
46 - "3f8add7e2e1d1d17"
47 - ]
48 - ]
49 - },
50 - {
51 - "id": "3f8add7e2e1d1d17",
52 - "type": "serial out",
53 - "z": "5f10779accc05655",
54 - "name": "",
55 - "serial": "bb1c0e81fd51fa9e",
56 - "x": 540,
57 - "y": 260,
58 - "wires": []
59 - },
60 - {
61 - "id": "16e7d3d83d9e9415",
62 - "type": "inject",
63 - "z": "5f10779accc05655",
64 - "name": "",
65 - "props": [
66 - {
67 - "p": "payload"
68 - }
69 - ],
70 - "repeat": "",
71 - "crontab": "",
72 - "once": false,
73 - "onceDelay": 0.1,
74 - "topic": "",
75 - "payload": "ATZ",
76 - "payloadType": "str",
77 - "x": 290,
78 - "y": 320,
79 - "wires": [
80 - [
81 - "3f8add7e2e1d1d17"
82 - ]
83 - ]
84 - },
85 - {
86 - "id": "09ea381519629dae",
87 - "type": "inject",
88 - "z": "5f10779accc05655",
89 - "name": "AT+FRE",
90 - "props": [
91 - {
92 - "p": "payload"
93 - }
94 - ],
95 - "repeat": "",
96 - "crontab": "",
97 - "once": false,
98 - "onceDelay": 0.1,
99 - "topic": "",
100 - "payload": "AT+FRE=868.100,868.100",
101 - "payloadType": "str",
102 - "x": 280,
103 - "y": 380,
104 - "wires": [
105 - [
106 - "3f8add7e2e1d1d17"
107 - ]
108 - ]
109 - },
110 - {
111 - "id": "5167a7f904013ffd",
112 - "type": "inject",
113 - "z": "5f10779accc05655",
114 - "name": "AT+BW",
115 - "props": [
116 - {
117 - "p": "payload"
118 - }
119 - ],
120 - "repeat": "",
121 - "crontab": "",
122 - "once": false,
123 - "onceDelay": 0.1,
124 - "topic": "",
125 - "payload": "AT+BW=0,0",
126 - "payloadType": "str",
127 - "x": 290,
128 - "y": 440,
129 - "wires": [
130 - [
131 - "3f8add7e2e1d1d17"
132 - ]
133 - ]
134 - },
135 - {
136 - "id": "dbe4abbc730c76e6",
137 - "type": "inject",
138 - "z": "5f10779accc05655",
139 - "name": "AT+SF",
140 - "props": [
141 - {
142 - "p": "payload"
143 - }
144 - ],
145 - "repeat": "",
146 - "crontab": "",
147 - "once": false,
148 - "onceDelay": 0.1,
149 - "topic": "",
150 - "payload": "AT+SF=12,12",
151 - "payloadType": "str",
152 - "x": 290,
153 - "y": 500,
154 - "wires": [
155 - [
156 - "3f8add7e2e1d1d17"
157 - ]
158 - ]
159 - },
160 - {
161 - "id": "3be3ab296a75d512",
162 - "type": "inject",
163 - "z": "5f10779accc05655",
164 - "name": "AT+RXMOD",
165 - "props": [
166 - {
167 - "p": "payload"
168 - }
169 - ],
170 - "repeat": "",
171 - "crontab": "",
172 - "once": false,
173 - "onceDelay": 0.1,
174 - "topic": "",
175 - "payload": "AT+RXMOD=65535,2",
176 - "payloadType": "str",
177 - "x": 270,
178 - "y": 560,
179 - "wires": [
180 - [
181 - "3f8add7e2e1d1d17"
182 - ]
183 - ]
184 - },
185 - {
186 - "id": "7a03d1413c60ea1c",
187 - "type": "inject",
188 - "z": "5f10779accc05655",
189 - "name": "AT+SYNCWORD",
190 - "props": [
191 - {
192 - "p": "payload"
193 - }
194 - ],
195 - "repeat": "",
196 - "crontab": "",
197 - "once": false,
198 - "onceDelay": 0.1,
199 - "topic": "",
200 - "payload": "AT+SYNCWORD=0",
201 - "payloadType": "str",
202 - "x": 260,
203 - "y": 620,
204 - "wires": [
205 - [
206 - "3f8add7e2e1d1d17"
207 - ]
208 - ]
209 - },
210 - {
211 - "id": "40eac96a52733f7a",
212 - "type": "function",
213 - "z": "5f10779accc05655",
214 - "name": "function 1",
215 - "func": "var data = msg.payload\nif (data.substring(0, 4) == \"Data\")\n{\n if (data.substring(6, 12) == \"(HEX:)\")\n {\n var temp = data.substring(13, 15) + data.substring(16, 18)\n var hum = data.substring(19, 21) + data.substring(22, 24)\n var temp1 = parseInt(temp, 16)/100\n var hum1 = parseInt(hum, 16)/10\n var a1 = { payload: temp1 }, a2 = { payload: hum1 }\n }\n}\nif (data.substring(0, 4) == \"Rssi\")\n{\n var rssi = data.substring(6)\n var a3 = { payload: rssi }\n}\nreturn [a1,a2,a3];\n \n\n",
216 - "outputs": 3,
217 - "noerr": 0,
218 - "initialize": "",
219 - "finalize": "",
220 - "libs": [],
221 - "x": 420,
222 - "y": 60,
223 - "wires": [
224 - [
225 - "81edb003937f1a92"
226 - ],
227 - [
228 - "c63593404a60d9dc"
229 - ],
230 - [
231 - "61ca71032888887b"
232 - ]
233 - ]
234 - },
235 - {
236 - "id": "61ca71032888887b",
237 - "type": "ui_chart",
238 - "z": "5f10779accc05655",
239 - "name": "",
240 - "group": "ef41b39771110fa5",
241 - "order": 1,
242 - "width": 0,
243 - "height": 0,
244 - "label": "RSSI",
245 - "chartType": "line",
246 - "legend": "false",
247 - "xformat": "dd HH:mm",
248 - "interpolate": "linear",
249 - "nodata": "",
250 - "dot": true,
251 - "ymin": "",
252 - "ymax": "",
253 - "removeOlder": 1,
254 - "removeOlderPoints": "",
255 - "removeOlderUnit": "3600",
256 - "cutout": 0,
257 - "useOneColor": false,
258 - "useUTC": false,
259 - "colors": [
260 - "#1f77b4",
261 - "#aec7e8",
262 - "#ff7f0e",
263 - "#2ca02c",
264 - "#98df8a",
265 - "#d62728",
266 - "#ff9896",
267 - "#9467bd",
268 - "#c5b0d5"
269 - ],
270 - "outputs": 1,
271 - "useDifferentColor": false,
272 - "className": "",
273 - "x": 670,
274 - "y": 180,
275 - "wires": [
276 - []
277 - ]
278 - },
279 - {
280 - "id": "81edb003937f1a92",
281 - "type": "ui_chart",
282 - "z": "5f10779accc05655",
283 - "name": "",
284 - "group": "7e1d1c102cf74e6b",
285 - "order": 1,
286 - "width": 0,
287 - "height": 0,
288 - "label": "Temperature",
289 - "chartType": "line",
290 - "legend": "false",
291 - "xformat": "HH:mm:ss",
292 - "interpolate": "linear",
293 - "nodata": "",
294 - "dot": true,
295 - "ymin": "",
296 - "ymax": "",
297 - "removeOlder": 1,
298 - "removeOlderPoints": "",
299 - "removeOlderUnit": "3600",
300 - "cutout": 0,
301 - "useOneColor": false,
302 - "useUTC": false,
303 - "colors": [
304 - "#1f77b4",
305 - "#aec7e8",
306 - "#ff7f0e",
307 - "#2ca02c",
308 - "#98df8a",
309 - "#d62728",
310 - "#ff9896",
311 - "#9467bd",
312 - "#c5b0d5"
313 - ],
314 - "outputs": 1,
315 - "useDifferentColor": false,
316 - "className": "",
317 - "x": 690,
318 - "y": 100,
319 - "wires": [
320 - []
321 - ]
322 - },
323 - {
324 - "id": "c63593404a60d9dc",
325 - "type": "ui_chart",
326 - "z": "5f10779accc05655",
327 - "name": "",
328 - "group": "3f5d139f158d7c1c",
329 - "order": 2,
330 - "width": 0,
331 - "height": 0,
332 - "label": "Humidity",
333 - "chartType": "line",
334 - "legend": "false",
335 - "xformat": "HH:mm:ss",
336 - "interpolate": "linear",
337 - "nodata": "",
338 - "dot": true,
339 - "ymin": "",
340 - "ymax": "",
341 - "removeOlder": 1,
342 - "removeOlderPoints": "",
343 - "removeOlderUnit": "3600",
344 - "cutout": 0,
345 - "useOneColor": false,
346 - "useUTC": false,
347 - "colors": [
348 - "#1f77b4",
349 - "#aec7e8",
350 - "#ff7f0e",
351 - "#2ca02c",
352 - "#98df8a",
353 - "#d62728",
354 - "#ff9896",
355 - "#9467bd",
356 - "#c5b0d5"
357 - ],
358 - "outputs": 1,
359 - "useDifferentColor": false,
360 - "className": "",
361 - "x": 680,
362 - "y": 140,
363 - "wires": [
364 - []
365 - ]
366 - },
367 - {
368 - "id": "79722a224bb22c96",
369 - "type": "debug",
370 - "z": "5f10779accc05655",
371 - "name": "debug 1",
372 - "active": true,
373 - "tosidebar": true,
374 - "console": false,
375 - "tostatus": false,
376 - "complete": "false",
377 - "statusVal": "",
378 - "statusType": "auto",
379 - "x": 420,
380 - "y": 180,
381 - "wires": []
382 - },
383 - {
384 - "id": "bb1c0e81fd51fa9e",
385 - "type": "serial-port",
386 - "serialport": "/dev/ttyUSB0",
387 - "serialbaud": "9600",
388 - "databits": "8",
389 - "parity": "none",
390 - "stopbits": "1",
391 - "waitfor": "",
392 - "dtr": "none",
393 - "rts": "none",
394 - "cts": "none",
395 - "dsr": "none",
396 - "newline": "\\n",
397 - "bin": "false",
398 - "out": "char",
399 - "addchar": "\\r\\n",
400 - "responsetimeout": "10000"
401 - },
402 - {
403 - "id": "ef41b39771110fa5",
404 - "type": "ui_group",
405 - "name": "rssi",
406 - "tab": "abb98f80600a5448",
407 - "order": 3,
408 - "disp": true,
409 - "width": "6",
410 - "collapse": false,
411 - "className": ""
412 - },
413 - {
414 - "id": "7e1d1c102cf74e6b",
415 - "type": "ui_group",
416 - "name": "TEM",
417 - "tab": "abb98f80600a5448",
418 - "order": 4,
419 - "disp": true,
420 - "width": "6",
421 - "collapse": false,
422 - "className": ""
423 - },
424 - {
425 - "id": "3f5d139f158d7c1c",
426 - "type": "ui_group",
427 - "name": "HUM",
428 - "tab": "abb98f80600a5448",
429 - "order": 2,
430 - "disp": true,
431 - "width": "6",
432 - "collapse": false,
433 - "className": ""
434 - },
435 - {
436 - "id": "abb98f80600a5448",
437 - "type": "ui_tab",
438 - "name": "LG01v2",
439 - "icon": "LG01v2",
440 - "disabled": false,
441 - "hidden": false
442 - }
443 -]
image-20221103152238-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -32.8 KB
Content
image-20221104100344-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -137.0 KB
Content
image-20221104100520-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -140.7 KB
Content
image-20221104102736-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -325.9 KB
Content
image-20221104155612-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -384.2 KB
Content
image-20221104155654-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20221104155724-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -42.4 KB
Content
image-20221104155907-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -66.7 KB
Content
image-20221104155928-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.5 KB
Content
image-20221104155949-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -46.0 KB
Content
image-20221108164337-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20221108164413-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -27.1 KB
Content
image-20221108170314-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.6 KB
Content
image-20221108170621-4.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -544.6 KB
Content
image-20221108170731-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -2.5 MB
Content
image-20221108172149-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20221108172432-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -45.9 KB
Content
image-20221108174840-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.1 KB
Content
image-20221108175113-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -72.6 KB
Content
image-20221108180334-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -159.3 KB
Content
image-20221108180458-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.4 KB
Content
image-20221112161031-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.1 KB
Content
image-20221112161111-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20221112162733-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -78.7 KB
Content
image-20221112163119-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -32.6 KB
Content
serial USB.json
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 KB
Content
... ... @@ -1,244 +1,0 @@
1 -[
2 - {
3 - "id": "5f10779accc05655",
4 - "type": "tab",
5 - "label": "serial USB",
6 - "disabled": false,
7 - "info": "",
8 - "env": []
9 - },
10 - {
11 - "id": "4ea60ce4df40717c",
12 - "type": "serial in",
13 - "z": "5f10779accc05655",
14 - "name": "",
15 - "serial": "bb1c0e81fd51fa9e",
16 - "x": 230,
17 - "y": 60,
18 - "wires": [
19 - [
20 - "a8a0db18429e7d84"
21 - ]
22 - ]
23 - },
24 - {
25 - "id": "a8a0db18429e7d84",
26 - "type": "debug",
27 - "z": "5f10779accc05655",
28 - "name": "debug 1",
29 - "active": true,
30 - "tosidebar": true,
31 - "console": false,
32 - "tostatus": false,
33 - "complete": "false",
34 - "statusVal": "",
35 - "statusType": "auto",
36 - "x": 440,
37 - "y": 60,
38 - "wires": []
39 - },
40 - {
41 - "id": "fe5a93a52b6adcf1",
42 - "type": "inject",
43 - "z": "5f10779accc05655",
44 - "name": "AT+SEND=1,hello world,0,3",
45 - "props": [
46 - {
47 - "p": "payload"
48 - }
49 - ],
50 - "repeat": "",
51 - "crontab": "",
52 - "once": false,
53 - "onceDelay": 0.1,
54 - "topic": "",
55 - "payload": "AT+SEND=1,hello world,0,3",
56 - "payloadType": "str",
57 - "x": 200,
58 - "y": 140,
59 - "wires": [
60 - [
61 - "3f8add7e2e1d1d17"
62 - ]
63 - ]
64 - },
65 - {
66 - "id": "3f8add7e2e1d1d17",
67 - "type": "serial out",
68 - "z": "5f10779accc05655",
69 - "name": "",
70 - "serial": "bb1c0e81fd51fa9e",
71 - "x": 530,
72 - "y": 140,
73 - "wires": []
74 - },
75 - {
76 - "id": "16e7d3d83d9e9415",
77 - "type": "inject",
78 - "z": "5f10779accc05655",
79 - "name": "",
80 - "props": [
81 - {
82 - "p": "payload"
83 - }
84 - ],
85 - "repeat": "",
86 - "crontab": "",
87 - "once": false,
88 - "onceDelay": 0.1,
89 - "topic": "",
90 - "payload": "ATZ",
91 - "payloadType": "str",
92 - "x": 270,
93 - "y": 200,
94 - "wires": [
95 - [
96 - "3f8add7e2e1d1d17"
97 - ]
98 - ]
99 - },
100 - {
101 - "id": "09ea381519629dae",
102 - "type": "inject",
103 - "z": "5f10779accc05655",
104 - "name": "AT+FRE",
105 - "props": [
106 - {
107 - "p": "payload"
108 - }
109 - ],
110 - "repeat": "",
111 - "crontab": "",
112 - "once": false,
113 - "onceDelay": 0.1,
114 - "topic": "",
115 - "payload": "AT+FRE=868.100,868.100",
116 - "payloadType": "str",
117 - "x": 260,
118 - "y": 260,
119 - "wires": [
120 - [
121 - "3f8add7e2e1d1d17"
122 - ]
123 - ]
124 - },
125 - {
126 - "id": "5167a7f904013ffd",
127 - "type": "inject",
128 - "z": "5f10779accc05655",
129 - "name": "AT+BW",
130 - "props": [
131 - {
132 - "p": "payload"
133 - }
134 - ],
135 - "repeat": "",
136 - "crontab": "",
137 - "once": false,
138 - "onceDelay": 0.1,
139 - "topic": "",
140 - "payload": "AT+BW=0,0",
141 - "payloadType": "str",
142 - "x": 270,
143 - "y": 320,
144 - "wires": [
145 - [
146 - "3f8add7e2e1d1d17"
147 - ]
148 - ]
149 - },
150 - {
151 - "id": "dbe4abbc730c76e6",
152 - "type": "inject",
153 - "z": "5f10779accc05655",
154 - "name": "AT+SF",
155 - "props": [
156 - {
157 - "p": "payload"
158 - }
159 - ],
160 - "repeat": "",
161 - "crontab": "",
162 - "once": false,
163 - "onceDelay": 0.1,
164 - "topic": "",
165 - "payload": "AT+SF=12,12",
166 - "payloadType": "str",
167 - "x": 270,
168 - "y": 380,
169 - "wires": [
170 - [
171 - "3f8add7e2e1d1d17"
172 - ]
173 - ]
174 - },
175 - {
176 - "id": "3be3ab296a75d512",
177 - "type": "inject",
178 - "z": "5f10779accc05655",
179 - "name": "AT+RXMOD",
180 - "props": [
181 - {
182 - "p": "payload"
183 - }
184 - ],
185 - "repeat": "",
186 - "crontab": "",
187 - "once": false,
188 - "onceDelay": 0.1,
189 - "topic": "",
190 - "payload": "AT+RXMOD=65535,0",
191 - "payloadType": "str",
192 - "x": 250,
193 - "y": 440,
194 - "wires": [
195 - [
196 - "3f8add7e2e1d1d17"
197 - ]
198 - ]
199 - },
200 - {
201 - "id": "7a03d1413c60ea1c",
202 - "type": "inject",
203 - "z": "5f10779accc05655",
204 - "name": "AT+SYNCWORD",
205 - "props": [
206 - {
207 - "p": "payload"
208 - }
209 - ],
210 - "repeat": "",
211 - "crontab": "",
212 - "once": false,
213 - "onceDelay": 0.1,
214 - "topic": "",
215 - "payload": "AT+SYNCWORD=0",
216 - "payloadType": "str",
217 - "x": 240,
218 - "y": 500,
219 - "wires": [
220 - [
221 - "3f8add7e2e1d1d17"
222 - ]
223 - ]
224 - },
225 - {
226 - "id": "bb1c0e81fd51fa9e",
227 - "type": "serial-port",
228 - "serialport": "/dev/ttyUSB0",
229 - "serialbaud": "9600",
230 - "databits": "8",
231 - "parity": "none",
232 - "stopbits": "1",
233 - "waitfor": "",
234 - "dtr": "none",
235 - "rts": "none",
236 - "cts": "none",
237 - "dsr": "none",
238 - "newline": "\\n",
239 - "bin": "false",
240 - "out": "char",
241 - "addchar": "\\n",
242 - "responsetimeout": "10000"
243 - }
244 -]

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0