Last modified by Kilight Cao on 2024/10/12 08:58
<
From version < 102.1 >
edited by Edwin Chen
on 2022/11/14 19:41
To version < 143.1 >
edited by Kilight Cao
on 2023/10/14 09:28
>
Change comment: Uploaded new attachment "image-20231014092843-1.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Kilight
Content
... ... @@ -11,26 +11,33 @@
11 11  
12 12  {{toc/}}
13 13  
14 -= **1. Introduction** =
15 15  
16 16  
17 -== **1.1 What is LG01-V2** ==
18 18  
19 19  
18 +
19 += 1. Introduction =
20 +
21 +== 1.1 What is LG01v2 ==
22 +
23 +
20 20  (((
21 21  (((
22 -The LG01-V2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LG01v2 is an (% style="color:blue" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 +
28 +LG01v2 is specially design for (% style="color:blue" %)**peer to peer LoRa**(%%) protocol instead of LoRaWAN protocol. The LG01v2 use single channel LoRa module to minimize the deployment cost for a private p2p LoRa wireless network.
23 23  )))
24 24  
25 25  (((
26 -LG01-V2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
32 +LG01v2 uses Open Source Linux system. User can modify the Linux part and develop customize software base on it. It has (% style="color:blue" %)**1.2Ghz Quad-Core CPU**(%%) , (% style="color:blue" %)**4GB eMMC storage**(%%) and (% style="color:blue" %)**512MB RAM**(%%) for most application.
33 +
34 +LG01v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
27 27  )))
28 28  
29 29  
38 +== 1.2 Specifications ==
30 30  
31 -== **1.2 Specifications** ==
32 32  
33 -
34 34  (% style="color:#037691" %)**Hardware System:**
35 35  
36 36  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -48,7 +48,7 @@
48 48  * Storage Temperature: -20 ~~ 65°C
49 49  * Power Input: 5V, 2A, DC
50 50  
51 -== **1.3 Features** ==
58 +== 1.3 Features ==
52 52  
53 53  
54 54  * Open Source Debian system
... ... @@ -56,69 +56,65 @@
56 56  * Remote Management
57 57  * Auto-provisioning for batch deployment and management
58 58  * LoRa Gateway
59 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
60 60  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
61 61  
62 -== **1.4 Block Diagram** ==
68 +== 1.4 Block Diagram ==
63 63  
64 64  
65 65  
66 -== **1.5 LED Indicators** ==
72 +== 1.5 LED Indicators ==
67 67  
68 68  
69 69  LG01-V2 has totally four LEDs, They are:
70 70  
71 71  
72 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
78 +(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
73 73  
74 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
80 +(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
75 75  
76 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
82 +(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
77 77  
78 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
84 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
79 79  
80 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
86 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
81 81  
82 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
88 + ✓** SOLID RED:** Device doesn't have an Internet connection.
83 83  
84 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
90 +(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
85 85  
86 86  
93 +== 1.6 Button Intruction ==
87 87  
88 -== **1.6 Button Intruction** ==
89 89  
90 -
91 91  LG01-V2 has a black toggle button, which is:
92 92  
93 93  
94 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
99 +(% style="color:blue" %)**➢ Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
95 95  
96 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
101 + **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
97 97  
98 98  
99 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
104 +(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
100 100  
101 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
106 + **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
102 102  
103 103  
109 += 2. Quick Start =
104 104  
105 -= **2. Quick Start** =
106 106  
107 -
108 108  The LG01-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
109 109  
110 110  In most cases, the first thing you need to do is make the LG01-v2 accessible to the network.
111 111  
112 112  
113 -== **2.1 Connects to the network and accesses the gateway Web UI** ==
117 +== 2.1 Access and Configure LG01-v2 ==
114 114  
119 +=== 2.1.1 Find IP address of LG01-v2 ===
115 115  
116 -== **2.1.1 connect the network.** ==
117 117  
122 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
118 118  
119 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
120 120  
121 -
122 122  Connect the LG01-V2 Ethernet port to your router and LG01-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01-V2.
123 123  
124 124  You can also use this IP to connect.
... ... @@ -126,10 +126,38 @@
126 126  
127 127  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100129-1.png?width=1263&height=332&rev=1.1||alt="image-20220622100129-1.png"]]
128 128  
132 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via LG01v2 Fallback IP ====
129 129  
130 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
134 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230107084650-2.png?width=839&height=310&rev=1.1||alt="image-20230107084650-2.png" height="284" width="769"]]
131 131  
132 132  
137 +**Steps to connect via fallback IP:**
138 +
139 +~1. Connect the PC's Ethernet port to LG01v2's WAN port
140 +
141 +2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
142 +
143 +**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
144 +
145 +
146 +As in the below photo:
147 +
148 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413172038-1.png?width=1243&height=732&rev=1.1||alt="image-20230413172038-1.png" height="624" width="1059"]]
149 +
150 +
151 +Configure computer Ethernet port steps video: **[[fallback ip.mp4>>url:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/fallback%20ip.mp4?rev=1.1]]**
152 +
153 +If you still can't access the LG01v2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/LG01v2/#H10.1A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
154 +
155 +3. In the PC, use IP address 172.31.255.254 to access the LG01v2 via Web or Console.
156 +
157 +[[image:image-20230506115438-13.png||height="554" width="1047"]]
158 +
159 +
160 +
161 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ====
162 +
163 +
133 133  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100542-2.png?width=1256&height=369&rev=1.1||alt="image-20220622100542-2.png"]]
134 134  
135 135  
... ... @@ -136,74 +136,111 @@
136 136  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
137 137  
138 138  
139 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102702-6.png?rev=1.1||alt="image-20220622102702-6.png"]]
170 +[[image:image-20230506113332-2.png]]
140 140  
141 141  
142 142  **Wi-Fi configuration successful**
143 143  
144 144  
145 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102847-7.png?rev=1.1||alt="image-20220622102847-7.png"]]
176 +[[image:image-20230506113432-3.png||height="397" width="855"]]
146 146  
147 147  
179 +=== 2.1.2 Access Configure Web UI ===
148 148  
149 -= **3. Web Configure Pages** =
150 150  
151 -== **3.1 Home** ==
182 +**Web Interface**
152 152  
153 -//Shows the system running status~://
184 +Open a browser on the PC and type the LG01v2 ip address (depends on your connect method)
154 154  
155 -[[image:image-20221104155612-1.png||height="497" width="942"]]
156 156  
187 +[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
157 157  
158 -== **3.2 Network Settings** ==
189 +You will see the login interface of LG01v2 as shown below.
159 159  
191 +The account details for Web Login are:
160 160  
161 -=== **3.2.1 Network ~-~-> WiFi** ===
193 +(% style="color:#4f81bd" %)**User Name: root**
162 162  
195 +(% style="color:#4f81bd" %)**Password:   dragino**
163 163  
164 -[[image:image-20221104155654-2.png||height="319" width="813"]]
197 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230106153501-1.png?width=894&height=367&rev=1.1||alt="image-20230106153501-1.png"]]
165 165  
166 166  
200 += 3. Web Configure Pages =
167 167  
168 -=== **3.4.2 Network ~-~-> System Status** ===
202 +== 3.1 Home ==
169 169  
170 170  
171 -[[image:image-20221104155724-3.png||height="679" width="861"]]
205 +Shows the system running status:
172 172  
207 +[[image:image-20230506113531-4.png||height="430" width="818"]]
173 173  
174 174  
175 -=== **3.4.3 Network ~-~-> Firewall** ===
210 +== 3.2 Network Settings ==
176 176  
212 +=== 3.2.1 Network ~-~-> WiFi ===
177 177  
178 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616115351-6.png?width=661&height=244&rev=1.1||alt="image-20220616115351-6.png"]]
179 179  
215 +[[image:image-20230506113602-5.png]]
180 180  
181 181  
182 -== **3.5 System** ==
218 +=== 3.4.2 Network ~-~-> System Status ===
183 183  
184 184  
185 -=== **3.5.1  System ~-~-> System Overview** ===
221 +[[image:image-20230506113623-6.png||height="511" width="672"]]
186 186  
187 187  
224 +== 3.5 System ==
225 +
226 +=== 3.5.1  System ~-~-> System Overview ===
227 +
228 +
188 188  Shows the system info:
189 189  
190 -[[image:image-20221104155907-4.png]]
231 +[[image:image-20230506113705-7.png]]
191 191  
192 192  
234 +=== 3.5.2 System ~-~-> Backup/Restore ===
193 193  
194 -=== **3.5.2 System ~-~-> Backup/Restore** ===
195 195  
237 +[[image:image-20230506113722-8.png||height="254" width="797"]]
196 196  
197 -[[image:image-20221104155928-5.png||height="334" width="880"]]
198 198  
240 +=== 3.5.3 System ~-~-> System General ===
199 199  
200 -= (% id="cke_bm_1978S" style="display:none" %)** **(%%)**4. Build in Server** =
201 201  
243 +In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
202 202  
245 +In addition, Users can customize the FallBack IP address.
246 +
247 +[[image:image-20230506113813-10.png||height="659" width="749"]]
248 +
249 +
250 +=== 3.5.4 System ~-~-> Remoteit ===
251 +
252 +
253 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
254 +
255 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
256 +
257 +[[image:image-20230506113831-11.png||height="567" width="748"]]
258 +
259 +
260 +=== 3.5.5 System ~-~-> Package Management ===
261 +
262 +
263 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
264 +
265 +[[image:image-20230506114127-12.png||height="803" width="762"]]
266 +
267 +
268 += (% id="cke_bm_1978S" style="display:none" %) (%%)4. Build in Server =
269 +
270 +
203 203  The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
204 204  
205 205  
206 -[[image:image-20221104155949-6.png||height="315" width="1023"]]
274 +[[image:image-20230506113737-9.png]]
207 207  
208 208  
209 209  (% style="color:red" %)**Note:**
... ... @@ -211,18 +211,16 @@
211 211   **Path**: System ~-~-> Built-in Server
212 212  
213 213  
214 -**Troubleshooting:**
282 +(% style="color:blue" %)**Troubleshooting：**
215 215  
216 -
217 217  **~ 1. URL does not jump properly**
218 218  
219 219   For the Node-Red, you can use the local IP address and the port is 1880 to access it.
220 220  
221 221  
289 +== 4.1 Application Server ~-~- Node-Red ==
222 222  
223 -== **4.1 Application Server ~-~- Node-Red** ==
224 224  
225 -
226 226  You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
227 227  
228 228  
... ... @@ -232,12 +232,24 @@
232 232  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
233 233  
234 234  
235 -= **5. How to configure the Lora Gateway** =
301 += 5. How to configure the Lora Gateway =
236 236  
303 +== 5.1 Configure and Debug LoRa wireless of LG01v2 ==
237 237  
238 -== **5.1 Configure and Debug LoRa wireless of LG01v2** ==
239 239  
306 +First, the user needs to access the Linux console of LG01v2 via ssh
240 240  
308 +**IP address:  (% style="color:blue" %)IP address of LG01v2(%%)**
309 +
310 +**Port:  (% style="color:blue" %)22(%%)**
311 +
312 +**User Name:   (% style="color:blue" %)root(%%)**
313 +
314 +**Password:  (% style="color:blue" %)dragino(default)(%%)**
315 +
316 +[[image:image-20230504100722-3.png||height="228" width="908"]]
317 +
318 +
241 241  Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**:
242 242  
243 243  (% class="box infomessage" %)
... ... @@ -258,7 +258,9 @@
258 258  )))
259 259  
260 260  
261 -(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**(%%)
339 +(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**
340 +
341 +
262 262  (% style="color:red" %)[[image:image-20221029174703-3.png]]
263 263  
264 264  
... ... @@ -267,26 +267,27 @@
267 267  
268 268  (% class="box infomessage" %)
269 269  (((
270 -AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
271 -AT+GROUPMOD=0,0  ~-~--> TX and RX group
272 -AT+BW=0,0  ~-~--> TX and RX Bandwidth
273 -AT+SF=12,12  ~-~--> TX and RX Spreading Factor
274 -AT+POWER=14  ~-~--> TX Power Range
275 -AT+CRC=1,1  ~-~--> TX and RX CRC Type
276 -AT+HEADER=0,0  ~-~--> TX and RX Header Type
277 -AT+CR=1,1  ~-~--> TX and RX Coding Rate
278 -AT+IQ=0,0  ~-~--> TX and RX InvertIQ
279 -AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length
280 -AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
281 -AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
282 -AT+RXDAFORM=1                              
350 +**AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
351 +AT+GROUPMOD=0,0  ~-~-->  TX and RX group
352 +AT+BW=0,0  ~-~-->  TX and RX Bandwidth
353 +AT+SF=12,12  ~-~-->  TX and RX Spreading Factor
354 +AT+POWER=14  ~-~-->  TX Power Range
355 +AT+CRC=1,1  ~-~-->  TX and RX CRC Type
356 +AT+HEADER=0,0  ~-~-->  TX and RX Header Type
357 +AT+CR=1,1  ~-~-->  TX and RX Coding Rate
358 +AT+IQ=0,0  ~-~-->  TX and RX InvertIQ
359 +AT+PREAMBLE=8,8  ~-~-->  TX and RX Preamble Length
360 +AT+SYNCWORD=0  ~-~-->  Syncword(0: private，1: public)
361 +AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
362 +AT+RXDAFORM=1**                              
283 283  )))
284 284  
285 285  
286 -== **5.2 Example: LG01v2** ==
366 +== 5.2 Example: LG01v2 ==
287 287  
288 -=== **5.2.1 Introduce for the example:** ===
368 +=== 5.2.1 Introduce for the example: ===
289 289  
370 +
290 290  [[image:image-20221104102736-3.png||height="282" width="723"]]
291 291  
292 292  
... ... @@ -300,6 +300,7 @@
300 300  
301 301  ==== **Set up LA66 Module** ====
302 302  
384 +
303 303  LA66 Module is loaded with the firmware **[[LA66 Peer-to-Peer firmware>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]] **and user can use AT Command to set up LA66 with below parameters:
304 304  
305 305  (((
... ... @@ -324,10 +324,13 @@
324 324  )))
325 325  
326 326  
409 +
327 327  ==== **Set up Arduino UNO** ====
328 328  
329 -(% id="cke_bm_1033249S" style="display:none" %)** **(%%)**Hardware Connection**
412 +(% id="cke_bm_1033249S" style="display:none" %)** **
330 330  
414 +**Hardware Connection**
415 +
331 331  (% class="box infomessage" %)
332 332  (((
333 333  **The DHT11 sensor connects to the LA66 Shield:**
... ... @@ -340,13 +340,17 @@
340 340  [[image:image-20221108170731-5.png||height="588" width="441"]]
341 341  
342 342  
428 +
343 343  ===== **1. Open Arduino IDE** =====
344 344  
431 +
345 345  [[image:image-20221108172149-6.png||height="650" width="542"]]
346 346  
347 347  
435 +
348 348  ===== **2. Open project** =====
349 349  
438 +
350 350  Users can download Arduino files from this link: [[attach:Log-Temperature-Sensor-and-send-data-to-Node-red.ino||target="_blank"]]
351 351  
352 352  Then click Compile and Upload to LA66 Shield,
... ... @@ -354,19 +354,21 @@
354 354  [[image:image-20221108172432-7.png]]
355 355  
356 356  
446 +
357 357  ===== **3. Open the Serial Monitor to check the LA66 Shield data** =====
358 358  
449 +
359 359  The UNO will now reads the temperature and humidity data from the sensor and broadcast it via LoRa wireless,
360 360  
361 361  [[image:image-20221108174840-8.png||height="731" width="671"]]
362 362  
363 363  
455 +
364 364  Sending out data as below.
365 365  
366 366  [[image:image-20221108175113-9.png||height="556" width="998"]]
367 367  
368 368  
369 -
370 370  === 5.2.3 Set Up LG01v2 ===
371 371  
372 372  
... ... @@ -388,12 +388,13 @@
388 388  AT+IQ=0,0  ~-~--> TX and RX InvertIQ
389 389  AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
390 390  AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
391 -AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode, RX window always open
482 +AT+RXMOD=65535,2  ~-~-->  Rx Timeout and Reply mode, RX window always open**(0:No ACK, 1:Reply mode, 2:Send an ACK once got a message from another device. ACK Content is 0x00 FF )**
392 392  )))
393 393  
394 394  
395 395  === 5.2.4 Test result ===
396 396  
488 +
397 397  After the above configuration is complete, users can send test simulation data to check whether the configuration is correct, In LA66 sheild serial console send:(% style="color:red" %)**(AT+SEND=1,hello world,2,3).**
398 398  )))
399 399  
... ... @@ -402,17 +402,18 @@
402 402  [[image:image-20221108164413-2.png]]
403 403  
404 404  
497 +
405 405  In the real-time log of LG01v2：
406 406  
407 407  [[image:image-20221108170314-3.png]]
408 408  
409 409  
410 -=== **5.2.5 Plot data chart in LG01v2** ===
503 +=== 5.2.5 Plot data chart in LG01v2 ===
411 411  
412 412  
413 413  User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
414 414  
415 -User can import this example in Node-Red: [[attach:Log-Temperature-Sensor-and-send-data-to-node-red.json||target="_blank"]]
508 +User can import this example in Node-Red: [[attach:Log-Temperature-Sensor-and-send-data-to-Node-red.json||target="_blank"]]
416 416  
417 417  [[image:image-20221108180334-10.png||height="651" width="1141"]]
418 418  
... ... @@ -424,52 +424,26 @@
424 424  [[image:image-20221108180458-11.png||height="402" width="1137"]]
425 425  
426 426  
427 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**v(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
428 428  
521 += 6. OTA System Update =
429 429  
430 -(% style="color:blue" %)**USB TTL to LG01-V2  Connection:**
431 431  
524 +LG01v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
432 432  
433 -Port 1 of the UART on the LG01-V2 is GND
434 434  
435 -(% class="box infomessage" %)
436 -(((
437 -**TXD  <~-~--> UART RXD (Gray line)**
527 += 7. FAQ =
438 438  
439 -**RXD  <~-~--> UART TXD (White line)**
529 +== 7.1 How does LG01v2 communicate with Lora shield (LoRa.h) ==
440 440  
441 -**GND <~-~--> GND (Black line)**
442 -)))
443 443  
532 +This example describes how to use LG01v2, LoRa Shield to set up a LoRa network,
444 444  
445 -**LG01-V2 UART connection photo**
446 -
447 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
448 -
449 -
450 -
451 -In the PC, you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LG01v2. LG01v2 will output system info once power on as below:
452 -
453 -
454 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
455 -
456 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
457 -
458 -
459 -= **7. FAQ** =
460 -
461 -
462 -== **7.1 How does LG01-V2 communicate with Lora shield (LoRa.h)** ==
463 -
464 -
465 -This example describes how to use LG01-V2, LoRa Shield to set up a LoRa network,
466 -
467 467  [[image:image-20221103152238-8.png||height="251" width="654"]]
468 468  
469 469  
470 -(% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
537 +(% style="color:red" %)**Prerequisites: The configurations of LG01v2 and Lora shield must match**
471 471  
472 -**LG01-V2 configuration:**
539 +**LG01v2 configuration:**
473 473  
474 474  (% class="box infomessage" %)
475 475  (((
... ... @@ -487,6 +487,8 @@
487 487  AT+RXDAFORM=1    
488 488  )))
489 489  
557 +
558 +
490 490  **Lora shield configuration:**
491 491  
492 492  Lora Shield example: [[attach:LoRa_Shield_Sketch_For_MQTT.ino||target="_blank"]] , [[attach:arduino-LoRa-master.zip||target="_blank"]]
... ... @@ -494,27 +494,30 @@
494 494  [[image:image-20221101161318-2.png]]
495 495  
496 496  
497 -**Test LG01-V2 to receive Lora Shield data:**
498 498  
567 +**Test LG01v2 to receive Lora Shield data:**
568 +
499 499  [[image:image-20221101161951-3.png]]
500 500  
501 501  
502 -**Test the LG01-V2 to send data:**
503 503  
573 +**Test the LG01v2 to send data:**
574 +
504 504  [[image:image-20221101162527-4.png]]
505 505  
506 506  
507 -== **7.2 How does LG01-V2 communicate with Heltec LoRa Node** ==
578 +== 7.2 How does LG01v2 communicate with Heltec LoRa Node ==
508 508  
509 509  
510 -This example describes how to use LG01-V2 and Heltec LoRa Node to set up a LoRa network,
581 +This example describes how to use LG01v2 and Heltec LoRa Node to set up a LoRa network,
511 511  
512 512  [[image:image-20221112161111-2.png||height="258" width="692"]]
513 513  
514 -(% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
585 +(% style="color:red" %)**Prerequisites: The configurations of LG01v2 and Lora shield must match**
515 515  
516 -**LG01-V2 configuration:**
517 517  
588 +**LG01v2 configuration:**
589 +
518 518  (% class="box infomessage" %)
519 519  (((
520 520  AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
... ... @@ -531,6 +531,7 @@
531 531  AT+RXDAFORM=1  ~-~--> RX data format**（0: Hex ,1: String）**
532 532  )))
533 533  
606 +
534 534  After we upload the sketch to Heltec LoRa Node, we can see below output from Arduino.
535 535  
536 536  Lora Shield example: [[attach:LoRa_send_trial.ino||target="_blank"]]
... ... @@ -542,55 +542,143 @@
542 542  
543 543  [[image:image-20221112163119-4.png||height="808" width="560"]]
544 544  
545 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
546 546  
619 +== 7.3 How does LG01v2 communicate with LoRaWAN node ==
547 547  
621 +
622 +This example describes how to use LG01v2 and LSN50 to set up a  network,
623 +
624 +In this case, users need to set LSN50 to work in ABP mode and transmit in only one frequency.
625 +
626 +Assume we have a LG01v2 working in the frequency 868100000 now, below is the steps.
627 +
628 +
629 +**Step1: **Configure the LG01v2
630 +
631 +(% class="box infomessage" %)
548 548  (((
549 -**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
633 +AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
634 +AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
635 +AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
636 +AT+SYNCWORD=1  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
550 550  )))
551 551  
639 +**Step2:  **Run AT commands to make the LSN50 work in Single frequency and ABP mode. Below are the AT commands:
640 +
641 +(% class="box infomessage" %)
552 552  (((
553 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
643 +AT+FDR  ~-~--> Reset Parameters to Factory Default, Keys Reserve
644 +AT+NJM=0  ~-~-->  Set to ABP mode
645 +AT+ADR=0  ~-~-->  Set the Adaptive Data Rate Off
646 +AT+DR=0  ~-~--> Set Data Rate (Set AT+DR=3 for 915 band)
647 +AT+TDC=300000  ~-~-->  Set transmit interval to 5 minutes
648 +AT+CHS=868100000  ~-~--> Set transmit frequency to 868.1Mhz
649 +AT+DADDR=FFFFF111  ~-~--> Set Device Address to 26 01 1A F1
650 +ATZ  ~-~--> Reset MCU
651 +)))
554 554  
653 +**Step3:  **Check result
555 555  
556 556  
557 -= **9. Reference** =
558 558  
657 +User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
559 559  
560 -* Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
561 -* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
659 +User can import this example in Node-Red: [[attach:LG01v2_LSN50v2_S31.json||target="_blank"]]
562 562  
661 +
662 +First the user needs to fill in the NwkSkey and AppSkey in the LoraWan Packet Decrypter node.
663 +
664 +[[image:image-20230620103535-2.png||height="591" width="1138"]]
665 +
666 +[[image:image-20230620103153-1.png||height="610" width="1141"]]
667 +
668 +
669 +The data will be displayed in the built-in node-red UI
670 +
671 +**Browser input: (% style="background-color:yellow" %)__//http:~/~/<local-IPV4-address>//__(%%)**
672 +
673 +[[image:image-20230620103923-3.png||height="476" width="1138"]]
674 +
675 +
676 +== 7.4 How can users factory reset LG01v2 ==
677 +
678 +
679 +Users can download the image of LG01v2 from this link：[[dragino-lg01v2-1.7-0210>>https://www.dropbox.com/scl/fi/g0si61lcrvdjyto4ma951/dragino-lg01v2-1.7-0210.zip?rlkey=t03oqo493r2p7ign488rs2jsv&dl=0]]
680 +
681 +
682 +Then follow the steps in the link below to restore factory Settings to LG01v2：
683 +
684 +[[How to flash a new image(OS) to the gateway>>url:https://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
685 +
686 +
687 += 8. Trouble Shooting =
688 +
689 +== 8.1  Fallback IP does not work, how can users check ==
690 +
691 +
692 +When the computer has completed the above fallback IP configuration,the LG01v2 Web UI is still not accessible via fallback IP.
693 +
694 +
695 +**1.Check whether the configuration is correct**
696 +
697 +Run the CMD command to ipconfig and ping 172.31.255.254.
698 +
699 +If this fails, the user needs to reconfigure.
700 +
701 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413170224-3.png?width=707&height=433&rev=1.1||alt="image-20230413170224-3.png"]]
702 +
703 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413170246-4.png?rev=1.1||alt="image-20230413170246-4.png"]]
704 +
705 +
706 +**2. Check whether the firewall is disabled**
707 +
708 +If the firewall is not down, this will affect access to the gateway.
709 +
710 +
711 += (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
712 +
713 +
714 +(((
715 +If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
716 +)))
717 +
718 +(((
719 +With your question as detailed as possible. We will reply and help you in the shortest.
720 +
721 +
722 += 10. Reference =
723 +
724 +
725 +* Install Tago Core: Refer **Install Tago Core in LG01v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
726 +
727 +* [[Advance OS Reference Guide for L>>doc:Main.Armbian OS instruction.WebHome]]G01v2.
728 +
563 563  
564 564  )))
565 565  
566 -= **10. Order Info** =
732 += 11. Order Info =
567 567  
568 568  
569 -(% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
735 +(% style="color:#0000ff" %)**LG01v2-XXX-YYY**
570 570  
571 571  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
572 572  
573 -* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
574 -* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
575 -* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
576 -* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
577 -* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
578 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
739 +* (% style="color:red" %)**868**(%%): For frequency : 863 ~~ 870Mhz
740 +* (% style="color:red" %)**915**(%%): For frequency : 902 ~~ 928Mhz
579 579  
580 580  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
581 581  
582 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
583 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
584 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
585 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
744 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
745 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America: Verizon, AT&T(FirstNet), U.S.Cellular; Canada: Telus
746 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
747 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
586 586  
587 587  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
588 588  
589 589  
752 += 12. Manufacturer Info =
590 590  
591 -= **10. Manufacturer Info** =
592 592  
593 -
594 594  **Shenzhen Dragino Technology Development co. LTD**
595 595  
596 596  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -598,10 +598,9 @@
598 598  LongCheng Street, LongGang District ; Shenzhen 518116,China
599 599  
600 600  
762 += 13. FCC Warning =
601 601  
602 -= **11. FCC Warning** =
603 603  
604 -
605 605  (((
606 606  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
607 607  )))
... ... @@ -631,7 +631,6 @@
631 631  (((
632 632  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
633 633  
794 +
634 634  
635 635  )))
636 -
637 -~)~)~)
LG01v2_LSN50v2_S31.json
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +16.5 KB
Content
... ... @@ -1,0 +1,587 @@
1 +[
2 + {
3 + "id": "5e07f5eeeb2a969b",
4 + "type": "tab",
5 + "label": "流程 1",
6 + "disabled": false,
7 + "info": "",
8 + "env": []
9 + },
10 + {
11 + "id": "9c26fa2f19e2b556",
12 + "type": "function",
13 + "z": "5e07f5eeeb2a969b",
14 + "name": "hex to base64",
15 + "func": "var input = msg.payload;\nvar base64 = Buffer.from(input, 'hex').toString('base64');\nmsg.payload = base64;\nreturn msg;",
16 + "outputs": 1,
17 + "noerr": 0,
18 + "initialize": "",
19 + "finalize": "",
20 + "libs": [],
21 + "x": 220,
22 + "y": 160,
23 + "wires": [
24 + [
25 + "075bc9172a4c6570",
26 + "3601a98894805fbe"
27 + ]
28 + ]
29 + },
30 + {
31 + "id": "ee0480c81e66d657",
32 + "type": "function",
33 + "z": "5e07f5eeeb2a969b",
34 + "name": "function 4",
35 + "func": "var bytes = msg.payload[\"uplink_message\"]\nvar data = msg.payload[\"out\"]\nvar mode = (parseInt(data.substring(12, 14), 16) & 0x7C) >> 2;\nif (mode != 2)\n{\nvar bat = (parseInt(data.substring(0,4),16)&0x3FFF)/1000;\nvar TempC1 = (parseFloat(parseInt(data.substring(4, 8),16)/10).toFixed(2));\nvar ADC_CH0V = (parseInt(data.substring(8, 12), 16) ) / 1000;\nvar Digital_IStatus = (parseInt((data.substring(8, 12),16) & 0x02))?\"H\":\"L\"; \n\nif (mode != 6) {\n\n var EXTI_Trigger = ((parseInt(data.substring(12, 14), 16) & 0x01))? \"TRUE\" : \"FALSE\";\n\n var Door_status = ((parseInt(data.substring(12, 14), 16) & 0x80))? \"CLOSE\" : \"OPEN\";\n\n}\n}\nif (mode == 0) {\n\n var Work_mode = \"IIC\";\n\n if ((parseInt(data.substring(18, 22), 16)) == 0){\n\n var Illum = (parseInt(data.substring(8, 12), 16));\n\n }\n\n else {\n\n var TempC_SHT = parseFloat(((parseInt(data.substring(14, 18), 16)) / 10).toFixed(2));\n\n var Hum_SHT = parseFloat((((parseInt(data.substring(18, 22), 16))) / 10).toFixed(1));\n\n }\n \n}\n\nelse if (mode == 1) {\n\n var Work_mode = \" Distance\";\n\n var Distance_cm = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(1));\n\n if (((parseInt(data.substring(18, 22), 16))) != 65535){\n\n var Distance_signal_strength = parseFloat(((parseInt(data.substring(18, 22), 16))).toFixed(0));\n\n }\n\n}\n\nelse if (mode == 2) {\n\n var Work_mode = \" 3ADC\";\n\n var BatV = (parseInt(data.substring(18, 22), 16)) / 10;\n\n var ADC_CH0V = ((parseInt(data.substring(0, 4), 16))) / 1000;\n\n var ADC_CH1V = ((parseInt(data.substring(4, 8), 16))) / 1000;\n\n var ADC_CH4V = ((parseInt(data.substring(8, 12), 16))) / 1000;\n\n var Digital_IStatus = ((parseInt(data.substring(12, 14), 16)) & 0x02) ? \"H\" : \"L\";\n\n var EXTI_Trigger = ((parseInt(data.substring(12, 14), 16)) & 0x01) ? \"TRUE\" : \"FALSE\";\n\n var Door_status = ((parseInt(data.substring(13, 14), 16)) & 0x80) ? \"CLOSE\" : \"OPEN\";\n\n if ((parseInt(data.substring(18, 22), 16) === 0)) {\n\n var Illum = ((parseInt(data.substring(14, 18), 16)));\n\n }\n\n else {\n\n var TempC_SHT = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(2));\n\n var Hum_SHT = parseFloat((((parseInt(data.substring(18, 24), 16))) / 10).toFixed(1));\n\n }\n\n}\n\nelse if (mode == 3) {\n\n var Work_mode = \"3DS18B20\";\n\n var TempC2 = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(2));\n\n var TempC3 = parseFloat((((parseInt(data.substring(18, 24), 16))) / 10).toFixed(1));\n\n\n\n}\n\nelse if (mode == 4) {\n\n var Work_mode = \"Weight\";\n\n var Weight = ((parseInt(data.substring(14, 18), 16)));\n\n}\n\nelse if (mode == 5) {\n\n var Work_mode = \"Count\";\n\n var Count = ((parseInt(data.substring(14, 22), 16)));\n\n}\n\n\n\nvar b = { payload: bat }, c = { payload: TempC1 }, d = { payload: ADC_CH0V }, e = { payload: Digital_IStatus }, f = { payload: EXTI_Trigger }, g = { payload: Door_status }, j = { payload: TempC_SHT }, s = { payload: Hum_SHT }, k = { payload: Work_mode };\nreturn [b,c,d,e,f,g,j,k,s];",
36 + "outputs": 9,
37 + "noerr": 0,
38 + "initialize": "",
39 + "finalize": "",
40 + "libs": [],
41 + "x": 660,
42 + "y": 300,
43 + "wires": [
44 + [
45 + "fd22b92d2b8de0fb"
46 + ],
47 + [
48 + "3307256a4e1ea53a"
49 + ],
50 + [
51 + "a3fd8302ec399e31"
52 + ],
53 + [
54 + "c7d1f63ff5f0026a"
55 + ],
56 + [
57 + "159967056da52706"
58 + ],
59 + [
60 + "a21581a41adc1714"
61 + ],
62 + [
63 + "7bb78b78445ac9e3"
64 + ],
65 + [
66 + "0364752170ed6228"
67 + ],
68 + [
69 + "65293155d71d54b9"
70 + ]
71 + ]
72 + },
73 + {
74 + "id": "e763b293d42dbdd5",
75 + "type": "change",
76 + "z": "5e07f5eeeb2a969b",
77 + "name": "",
78 + "rules": [
79 + {
80 + "t": "change",
81 + "p": "payload",
82 + "pt": "msg",
83 + "from": "Data: (HEX:)",
84 + "fromt": "str",
85 + "to": "",
86 + "tot": "str"
87 + },
88 + {
89 + "t": "change",
90 + "p": "payload",
91 + "pt": "msg",
92 + "from": " ",
93 + "fromt": "str",
94 + "to": "",
95 + "tot": "str"
96 + }
97 + ],
98 + "action": "",
99 + "property": "",
100 + "from": "",
101 + "to": "",
102 + "reg": false,
103 + "x": 420,
104 + "y": 60,
105 + "wires": [
106 + [
107 + "9c26fa2f19e2b556",
108 + "416a930e89291528"
109 + ]
110 + ]
111 + },
112 + {
113 + "id": "075bc9172a4c6570",
114 + "type": "lorawan-packet-decrypt-nwkey-appkey",
115 + "z": "5e07f5eeeb2a969b",
116 + "name": "FFFFF111",
117 + "nsw": "CCFFFFFFFFFFFFFFFFFFFFFFFFFFFFAA",
118 + "asw": "FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCC",
119 + "x": 510,
120 + "y": 160,
121 + "wires": [
122 + [
123 + "ee0480c81e66d657"
124 + ]
125 + ]
126 + },
127 + {
128 + "id": "13dc77a4e2bb4f72",
129 + "type": "serial in",
130 + "z": "5e07f5eeeb2a969b",
131 + "name": "",
132 + "serial": "bb1c0e81fd51fa9e",
133 + "x": 190,
134 + "y": 60,
135 + "wires": [
136 + [
137 + "e763b293d42dbdd5"
138 + ]
139 + ]
140 + },
141 + {
142 + "id": "3307256a4e1ea53a",
143 + "type": "ui_chart",
144 + "z": "5e07f5eeeb2a969b",
145 + "name": "",
146 + "group": "c1fddd37879528e5",
147 + "order": 1,
148 + "width": 0,
149 + "height": 0,
150 + "label": "TempC1",
151 + "chartType": "line",
152 + "legend": "false",
153 + "xformat": "HH:mm:ss",
154 + "interpolate": "linear",
155 + "nodata": "",
156 + "dot": false,
157 + "ymin": "",
158 + "ymax": "",
159 + "removeOlder": 1,
160 + "removeOlderPoints": "",
161 + "removeOlderUnit": "3600",
162 + "cutout": 0,
163 + "useOneColor": false,
164 + "useUTC": false,
165 + "colors": [
166 + "#1f77b4",
167 + "#aec7e8",
168 + "#ff7f0e",
169 + "#2ca02c",
170 + "#98df8a",
171 + "#d62728",
172 + "#ff9896",
173 + "#9467bd",
174 + "#c5b0d5"
175 + ],
176 + "outputs": 1,
177 + "useDifferentColor": false,
178 + "className": "",
179 + "x": 940,
180 + "y": 160,
181 + "wires": [
182 + []
183 + ]
184 + },
185 + {
186 + "id": "a3fd8302ec399e31",
187 + "type": "ui_chart",
188 + "z": "5e07f5eeeb2a969b",
189 + "name": "",
190 + "group": "6d46fdae9f413f7b",
191 + "order": 1,
192 + "width": 0,
193 + "height": 0,
194 + "label": "ADC_CH0V",
195 + "chartType": "line",
196 + "legend": "false",
197 + "xformat": "HH:mm:ss",
198 + "interpolate": "linear",
199 + "nodata": "",
200 + "dot": false,
201 + "ymin": "",
202 + "ymax": "",
203 + "removeOlder": 1,
204 + "removeOlderPoints": "",
205 + "removeOlderUnit": "3600",
206 + "cutout": 0,
207 + "useOneColor": false,
208 + "useUTC": false,
209 + "colors": [
210 + "#1f77b4",
211 + "#aec7e8",
212 + "#ff7f0e",
213 + "#2ca02c",
214 + "#98df8a",
215 + "#d62728",
216 + "#ff9896",
217 + "#9467bd",
218 + "#c5b0d5"
219 + ],
220 + "outputs": 1,
221 + "useDifferentColor": false,
222 + "className": "",
223 + "x": 950,
224 + "y": 200,
225 + "wires": [
226 + []
227 + ]
228 + },
229 + {
230 + "id": "fd22b92d2b8de0fb",
231 + "type": "ui_chart",
232 + "z": "5e07f5eeeb2a969b",
233 + "name": "",
234 + "group": "bb5657c2a8c290a3",
235 + "order": 1,
236 + "width": 0,
237 + "height": 0,
238 + "label": "BatV",
239 + "chartType": "line",
240 + "legend": "false",
241 + "xformat": "HH:mm:ss",
242 + "interpolate": "linear",
243 + "nodata": "",
244 + "dot": false,
245 + "ymin": "",
246 + "ymax": "",
247 + "removeOlder": 1,
248 + "removeOlderPoints": "",
249 + "removeOlderUnit": "3600",
250 + "cutout": 0,
251 + "useOneColor": false,
252 + "useUTC": false,
253 + "colors": [
254 + "#1f77b4",
255 + "#aec7e8",
256 + "#ff7f0e",
257 + "#2ca02c",
258 + "#98df8a",
259 + "#d62728",
260 + "#ff9896",
261 + "#9467bd",
262 + "#c5b0d5"
263 + ],
264 + "outputs": 1,
265 + "useDifferentColor": false,
266 + "className": "",
267 + "x": 930,
268 + "y": 120,
269 + "wires": [
270 + []
271 + ]
272 + },
273 + {
274 + "id": "c7d1f63ff5f0026a",
275 + "type": "ui_text",
276 + "z": "5e07f5eeeb2a969b",
277 + "group": "528e965cef294158",
278 + "order": 0,
279 + "width": "6",
280 + "height": "4",
281 + "name": "",
282 + "label": "Digital_IStatus",
283 + "format": "{{msg.payload}}",
284 + "layout": "col-center",
285 + "className": "",
286 + "x": 960,
287 + "y": 240,
288 + "wires": []
289 + },
290 + {
291 + "id": "159967056da52706",
292 + "type": "ui_text",
293 + "z": "5e07f5eeeb2a969b",
294 + "group": "5e615e3edb5999a0",
295 + "order": 0,
296 + "width": "6",
297 + "height": "4",
298 + "name": "",
299 + "label": "EXTI_Trigger",
300 + "format": "{{msg.payload}}",
301 + "layout": "col-center",
302 + "className": "",
303 + "x": 950,
304 + "y": 280,
305 + "wires": []
306 + },
307 + {
308 + "id": "7bb78b78445ac9e3",
309 + "type": "ui_chart",
310 + "z": "5e07f5eeeb2a969b",
311 + "name": "",
312 + "group": "5f7fec85295a7f7c",
313 + "order": 0,
314 + "width": 0,
315 + "height": 0,
316 + "label": "TempC_SHT",
317 + "chartType": "line",
318 + "legend": "false",
319 + "xformat": "HH:mm:ss",
320 + "interpolate": "linear",
321 + "nodata": "",
322 + "dot": false,
323 + "ymin": "",
324 + "ymax": "",
325 + "removeOlder": 1,
326 + "removeOlderPoints": "",
327 + "removeOlderUnit": "3600",
328 + "cutout": 0,
329 + "useOneColor": false,
330 + "useUTC": false,
331 + "colors": [
332 + "#1f77b4",
333 + "#aec7e8",
334 + "#ff7f0e",
335 + "#2ca02c",
336 + "#98df8a",
337 + "#d62728",
338 + "#ff9896",
339 + "#9467bd",
340 + "#c5b0d5"
341 + ],
342 + "outputs": 1,
343 + "useDifferentColor": false,
344 + "className": "",
345 + "x": 950,
346 + "y": 360,
347 + "wires": [
348 + []
349 + ]
350 + },
351 + {
352 + "id": "0364752170ed6228",
353 + "type": "ui_text",
354 + "z": "5e07f5eeeb2a969b",
355 + "group": "3cb616f18674c42a",
356 + "order": 0,
357 + "width": "6",
358 + "height": "4",
359 + "name": "",
360 + "label": "Work_mode",
361 + "format": "{{msg.payload}}",
362 + "layout": "col-center",
363 + "className": "",
364 + "x": 950,
365 + "y": 400,
366 + "wires": []
367 + },
368 + {
369 + "id": "65293155d71d54b9",
370 + "type": "ui_chart",
371 + "z": "5e07f5eeeb2a969b",
372 + "name": "",
373 + "group": "bb2e35e7a931c198",
374 + "order": 0,
375 + "width": 0,
376 + "height": 0,
377 + "label": "Hum_SHT",
378 + "chartType": "line",
379 + "legend": "false",
380 + "xformat": "HH:mm:ss",
381 + "interpolate": "linear",
382 + "nodata": "",
383 + "dot": false,
384 + "ymin": "",
385 + "ymax": "",
386 + "removeOlder": 1,
387 + "removeOlderPoints": "",
388 + "removeOlderUnit": "3600",
389 + "cutout": 0,
390 + "useOneColor": false,
391 + "useUTC": false,
392 + "colors": [
393 + "#1f77b4",
394 + "#aec7e8",
395 + "#ff7f0e",
396 + "#2ca02c",
397 + "#98df8a",
398 + "#d62728",
399 + "#ff9896",
400 + "#9467bd",
401 + "#c5b0d5"
402 + ],
403 + "outputs": 1,
404 + "useDifferentColor": false,
405 + "className": "",
406 + "x": 950,
407 + "y": 440,
408 + "wires": [
409 + []
410 + ]
411 + },
412 + {
413 + "id": "a21581a41adc1714",
414 + "type": "ui_text",
415 + "z": "5e07f5eeeb2a969b",
416 + "group": "9109ae41eee353df",
417 + "order": 0,
418 + "width": "6",
419 + "height": "4",
420 + "name": "",
421 + "label": "Door_status",
422 + "format": "{{msg.payload}}",
423 + "layout": "col-center",
424 + "className": "",
425 + "x": 950,
426 + "y": 320,
427 + "wires": []
428 + },
429 + {
430 + "id": "416a930e89291528",
431 + "type": "debug",
432 + "z": "5e07f5eeeb2a969b",
433 + "name": "debug 2",
434 + "active": true,
435 + "tosidebar": true,
436 + "console": false,
437 + "tostatus": false,
438 + "complete": "false",
439 + "statusVal": "",
440 + "statusType": "auto",
441 + "x": 660,
442 + "y": 60,
443 + "wires": []
444 + },
445 + {
446 + "id": "3601a98894805fbe",
447 + "type": "debug",
448 + "z": "5e07f5eeeb2a969b",
449 + "name": "debug 3",
450 + "active": true,
451 + "tosidebar": true,
452 + "console": false,
453 + "tostatus": false,
454 + "complete": "false",
455 + "statusVal": "",
456 + "statusType": "auto",
457 + "x": 380,
458 + "y": 240,
459 + "wires": []
460 + },
461 + {
462 + "id": "bb1c0e81fd51fa9e",
463 + "type": "serial-port",
464 + "serialport": "/dev/ttyUSB0",
465 + "serialbaud": "9600",
466 + "databits": "8",
467 + "parity": "none",
468 + "stopbits": "1",
469 + "waitfor": "",
470 + "dtr": "none",
471 + "rts": "none",
472 + "cts": "none",
473 + "dsr": "none",
474 + "newline": "\\n",
475 + "bin": "false",
476 + "out": "char",
477 + "addchar": "\\r\\n",
478 + "responsetimeout": "10000"
479 + },
480 + {
481 + "id": "c1fddd37879528e5",
482 + "type": "ui_group",
483 + "name": "BatV",
484 + "tab": "abb98f80600a5448",
485 + "order": 1,
486 + "disp": true,
487 + "width": "6",
488 + "collapse": false,
489 + "className": ""
490 + },
491 + {
492 + "id": "6d46fdae9f413f7b",
493 + "type": "ui_group",
494 + "name": "ADC_CH0V",
495 + "tab": "abb98f80600a5448",
496 + "order": 1,
497 + "disp": true,
498 + "width": "6",
499 + "collapse": false,
500 + "className": ""
501 + },
502 + {
503 + "id": "bb5657c2a8c290a3",
504 + "type": "ui_group",
505 + "name": "BatV",
506 + "tab": "abb98f80600a5448",
507 + "order": 3,
508 + "disp": true,
509 + "width": "6",
510 + "collapse": false,
511 + "className": ""
512 + },
513 + {
514 + "id": "528e965cef294158",
515 + "type": "ui_group",
516 + "name": "Digital_IStatus",
517 + "tab": "abb98f80600a5448",
518 + "order": 4,
519 + "disp": true,
520 + "width": "6",
521 + "collapse": false,
522 + "className": ""
523 + },
524 + {
525 + "id": "5e615e3edb5999a0",
526 + "type": "ui_group",
527 + "name": "EXTI_Trigger",
528 + "tab": "abb98f80600a5448",
529 + "order": 5,
530 + "disp": true,
531 + "width": "6",
532 + "collapse": false,
533 + "className": ""
534 + },
535 + {
536 + "id": "5f7fec85295a7f7c",
537 + "type": "ui_group",
538 + "name": "TempC_SHT",
539 + "tab": "abb98f80600a5448",
540 + "order": 6,
541 + "disp": true,
542 + "width": "6",
543 + "collapse": false,
544 + "className": ""
545 + },
546 + {
547 + "id": "3cb616f18674c42a",
548 + "type": "ui_group",
549 + "name": "Work_mode",
550 + "tab": "abb98f80600a5448",
551 + "order": 7,
552 + "disp": true,
553 + "width": "6",
554 + "collapse": false,
555 + "className": ""
556 + },
557 + {
558 + "id": "bb2e35e7a931c198",
559 + "type": "ui_group",
560 + "name": "Hum_SHT",
561 + "tab": "abb98f80600a5448",
562 + "order": 8,
563 + "disp": true,
564 + "width": "6",
565 + "collapse": false,
566 + "className": ""
567 + },
568 + {
569 + "id": "9109ae41eee353df",
570 + "type": "ui_group",
571 + "name": "Door_status",
572 + "tab": "abb98f80600a5448",
573 + "order": 9,
574 + "disp": true,
575 + "width": "6",
576 + "collapse": false,
577 + "className": ""
578 + },
579 + {
580 + "id": "abb98f80600a5448",
581 + "type": "ui_tab",
582 + "name": "LSN50v2 S31",
583 + "icon": "LSN50v2 S31",
584 + "disabled": false,
585 + "hidden": false
586 + }
587 +]
Log-Temperature-Sensor-and-send-data-to-Node-red.json
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.3 KB
Content
... ... @@ -1,0 +1,443 @@
1 +[
2 + {
3 + "id": "0a211e08511c4bdd",
4 + "type": "tab",
5 + "label": "serial USB",
6 + "disabled": false,
7 + "info": "",
8 + "env": []
9 + },
10 + {
11 + "id": "4a97eeb54bf57a6d",
12 + "type": "serial in",
13 + "z": "0a211e08511c4bdd",
14 + "name": "",
15 + "serial": "bb1c0e81fd51fa9e",
16 + "x": 210,
17 + "y": 60,
18 + "wires": [
19 + [
20 + "d2493fb9752dbcab",
21 + "d183c255973c979e"
22 + ]
23 + ]
24 + },
25 + {
26 + "id": "12f1eeb8049675c1",
27 + "type": "inject",
28 + "z": "0a211e08511c4bdd",
29 + "name": "AT+SEND=1,hello world,0,3",
30 + "props": [
31 + {
32 + "p": "payload"
33 + }
34 + ],
35 + "repeat": "",
36 + "crontab": "",
37 + "once": false,
38 + "onceDelay": 0.1,
39 + "topic": "",
40 + "payload": "AT+SEND=1,hello world,0,3",
41 + "payloadType": "str",
42 + "x": 220,
43 + "y": 260,
44 + "wires": [
45 + [
46 + "a5d2f5df63a2148e"
47 + ]
48 + ]
49 + },
50 + {
51 + "id": "a5d2f5df63a2148e",
52 + "type": "serial out",
53 + "z": "0a211e08511c4bdd",
54 + "name": "",
55 + "serial": "bb1c0e81fd51fa9e",
56 + "x": 540,
57 + "y": 260,
58 + "wires": []
59 + },
60 + {
61 + "id": "dc04c04a0bc0e5db",
62 + "type": "inject",
63 + "z": "0a211e08511c4bdd",
64 + "name": "",
65 + "props": [
66 + {
67 + "p": "payload"
68 + }
69 + ],
70 + "repeat": "",
71 + "crontab": "",
72 + "once": false,
73 + "onceDelay": 0.1,
74 + "topic": "",
75 + "payload": "ATZ",
76 + "payloadType": "str",
77 + "x": 290,
78 + "y": 320,
79 + "wires": [
80 + [
81 + "a5d2f5df63a2148e"
82 + ]
83 + ]
84 + },
85 + {
86 + "id": "3de96a220e28e8f0",
87 + "type": "inject",
88 + "z": "0a211e08511c4bdd",
89 + "name": "AT+FRE",
90 + "props": [
91 + {
92 + "p": "payload"
93 + }
94 + ],
95 + "repeat": "",
96 + "crontab": "",
97 + "once": false,
98 + "onceDelay": 0.1,
99 + "topic": "",
100 + "payload": "AT+FRE=868.100,868.100",
101 + "payloadType": "str",
102 + "x": 280,
103 + "y": 380,
104 + "wires": [
105 + [
106 + "a5d2f5df63a2148e"
107 + ]
108 + ]
109 + },
110 + {
111 + "id": "638725a47a1e4365",
112 + "type": "inject",
113 + "z": "0a211e08511c4bdd",
114 + "name": "AT+BW",
115 + "props": [
116 + {
117 + "p": "payload"
118 + }
119 + ],
120 + "repeat": "",
121 + "crontab": "",
122 + "once": false,
123 + "onceDelay": 0.1,
124 + "topic": "",
125 + "payload": "AT+BW=0,0",
126 + "payloadType": "str",
127 + "x": 290,
128 + "y": 440,
129 + "wires": [
130 + [
131 + "a5d2f5df63a2148e"
132 + ]
133 + ]
134 + },
135 + {
136 + "id": "85ba9868d1f3e82c",
137 + "type": "inject",
138 + "z": "0a211e08511c4bdd",
139 + "name": "AT+SF",
140 + "props": [
141 + {
142 + "p": "payload"
143 + }
144 + ],
145 + "repeat": "",
146 + "crontab": "",
147 + "once": false,
148 + "onceDelay": 0.1,
149 + "topic": "",
150 + "payload": "AT+SF=12,12",
151 + "payloadType": "str",
152 + "x": 290,
153 + "y": 500,
154 + "wires": [
155 + [
156 + "a5d2f5df63a2148e"
157 + ]
158 + ]
159 + },
160 + {
161 + "id": "144b2749013ffe57",
162 + "type": "inject",
163 + "z": "0a211e08511c4bdd",
164 + "name": "AT+RXMOD",
165 + "props": [
166 + {
167 + "p": "payload"
168 + }
169 + ],
170 + "repeat": "",
171 + "crontab": "",
172 + "once": false,
173 + "onceDelay": 0.1,
174 + "topic": "",
175 + "payload": "AT+RXMOD=65535,2",
176 + "payloadType": "str",
177 + "x": 270,
178 + "y": 560,
179 + "wires": [
180 + [
181 + "a5d2f5df63a2148e"
182 + ]
183 + ]
184 + },
185 + {
186 + "id": "bfb2e9df89dc5e2f",
187 + "type": "inject",
188 + "z": "0a211e08511c4bdd",
189 + "name": "AT+SYNCWORD",
190 + "props": [
191 + {
192 + "p": "payload"
193 + }
194 + ],
195 + "repeat": "",
196 + "crontab": "",
197 + "once": false,
198 + "onceDelay": 0.1,
199 + "topic": "",
200 + "payload": "AT+SYNCWORD=0",
201 + "payloadType": "str",
202 + "x": 260,
203 + "y": 620,
204 + "wires": [
205 + [
206 + "a5d2f5df63a2148e"
207 + ]
208 + ]
209 + },
210 + {
211 + "id": "d2493fb9752dbcab",
212 + "type": "function",
213 + "z": "0a211e08511c4bdd",
214 + "name": "function 1",
215 + "func": "var data = msg.payload\nif (data.substring(0, 4) == \"Data\") {\n if (data.substring(6, 12) == \"(HEX:)\") {\n var temp = data.substring(13, 15) + data.substring(16, 18)\n var hum = data.substring(19, 21) + data.substring(22, 24)\n var temp1 = parseInt(temp, 16) / 100\n var hum1 = parseInt(hum, 16) / 10\n var a1 = { payload: temp1 }, a2 = { payload: hum1 }\n }\n if (data.substring(6, 15) == \"(String:)\") {\n var temp = data.substring(20, 24)\n var hum = data.substring(29, 34)\n a1 = { payload: temp }, a2 = { payload: hum }\n }\n}\nif (data.substring(0, 4) == \"Rssi\") {\n var rssi = data.substring(6)\n var a3 = { payload: rssi }\n}\nreturn [a1, a2, a3];",
216 + "outputs": 3,
217 + "noerr": 0,
218 + "initialize": "",
219 + "finalize": "",
220 + "libs": [],
221 + "x": 420,
222 + "y": 60,
223 + "wires": [
224 + [
225 + "c17d94be4317ae6c"
226 + ],
227 + [
228 + "20c5b1c7f42fa6bb"
229 + ],
230 + [
231 + "39a8462f3d748eef"
232 + ]
233 + ]
234 + },
235 + {
236 + "id": "39a8462f3d748eef",
237 + "type": "ui_chart",
238 + "z": "0a211e08511c4bdd",
239 + "name": "",
240 + "group": "ef41b39771110fa5",
241 + "order": 1,
242 + "width": 0,
243 + "height": 0,
244 + "label": "RSSI",
245 + "chartType": "line",
246 + "legend": "false",
247 + "xformat": "dd HH:mm",
248 + "interpolate": "linear",
249 + "nodata": "",
250 + "dot": true,
251 + "ymin": "",
252 + "ymax": "",
253 + "removeOlder": 1,
254 + "removeOlderPoints": "",
255 + "removeOlderUnit": "3600",
256 + "cutout": 0,
257 + "useOneColor": false,
258 + "useUTC": false,
259 + "colors": [
260 + "#1f77b4",
261 + "#aec7e8",
262 + "#ff7f0e",
263 + "#2ca02c",
264 + "#98df8a",
265 + "#d62728",
266 + "#ff9896",
267 + "#9467bd",
268 + "#c5b0d5"
269 + ],
270 + "outputs": 1,
271 + "useDifferentColor": false,
272 + "className": "",
273 + "x": 670,
274 + "y": 180,
275 + "wires": [
276 + []
277 + ]
278 + },
279 + {
280 + "id": "c17d94be4317ae6c",
281 + "type": "ui_chart",
282 + "z": "0a211e08511c4bdd",
283 + "name": "",
284 + "group": "7e1d1c102cf74e6b",
285 + "order": 1,
286 + "width": 0,
287 + "height": 0,
288 + "label": "Temperature",
289 + "chartType": "line",
290 + "legend": "false",
291 + "xformat": "HH:mm:ss",
292 + "interpolate": "linear",
293 + "nodata": "",
294 + "dot": true,
295 + "ymin": "",
296 + "ymax": "",
297 + "removeOlder": 1,
298 + "removeOlderPoints": "",
299 + "removeOlderUnit": "3600",
300 + "cutout": 0,
301 + "useOneColor": false,
302 + "useUTC": false,
303 + "colors": [
304 + "#1f77b4",
305 + "#aec7e8",
306 + "#ff7f0e",
307 + "#2ca02c",
308 + "#98df8a",
309 + "#d62728",
310 + "#ff9896",
311 + "#9467bd",
312 + "#c5b0d5"
313 + ],
314 + "outputs": 1,
315 + "useDifferentColor": false,
316 + "className": "",
317 + "x": 690,
318 + "y": 100,
319 + "wires": [
320 + []
321 + ]
322 + },
323 + {
324 + "id": "20c5b1c7f42fa6bb",
325 + "type": "ui_chart",
326 + "z": "0a211e08511c4bdd",
327 + "name": "",
328 + "group": "3f5d139f158d7c1c",
329 + "order": 2,
330 + "width": 0,
331 + "height": 0,
332 + "label": "Humidity",
333 + "chartType": "line",
334 + "legend": "false",
335 + "xformat": "HH:mm:ss",
336 + "interpolate": "linear",
337 + "nodata": "",
338 + "dot": true,
339 + "ymin": "",
340 + "ymax": "",
341 + "removeOlder": 1,
342 + "removeOlderPoints": "",
343 + "removeOlderUnit": "3600",
344 + "cutout": 0,
345 + "useOneColor": false,
346 + "useUTC": false,
347 + "colors": [
348 + "#1f77b4",
349 + "#aec7e8",
350 + "#ff7f0e",
351 + "#2ca02c",
352 + "#98df8a",
353 + "#d62728",
354 + "#ff9896",
355 + "#9467bd",
356 + "#c5b0d5"
357 + ],
358 + "outputs": 1,
359 + "useDifferentColor": false,
360 + "className": "",
361 + "x": 680,
362 + "y": 140,
363 + "wires": [
364 + []
365 + ]
366 + },
367 + {
368 + "id": "d183c255973c979e",
369 + "type": "debug",
370 + "z": "0a211e08511c4bdd",
371 + "name": "debug 1",
372 + "active": true,
373 + "tosidebar": true,
374 + "console": false,
375 + "tostatus": false,
376 + "complete": "false",
377 + "statusVal": "",
378 + "statusType": "auto",
379 + "x": 420,
380 + "y": 180,
381 + "wires": []
382 + },
383 + {
384 + "id": "bb1c0e81fd51fa9e",
385 + "type": "serial-port",
386 + "serialport": "/dev/ttyUSB0",
387 + "serialbaud": "9600",
388 + "databits": "8",
389 + "parity": "none",
390 + "stopbits": "1",
391 + "waitfor": "",
392 + "dtr": "none",
393 + "rts": "none",
394 + "cts": "none",
395 + "dsr": "none",
396 + "newline": "\\n",
397 + "bin": "false",
398 + "out": "char",
399 + "addchar": "\\r\\n",
400 + "responsetimeout": "10000"
401 + },
402 + {
403 + "id": "ef41b39771110fa5",
404 + "type": "ui_group",
405 + "name": "rssi",
406 + "tab": "abb98f80600a5448",
407 + "order": 3,
408 + "disp": true,
409 + "width": "6",
410 + "collapse": false,
411 + "className": ""
412 + },
413 + {
414 + "id": "7e1d1c102cf74e6b",
415 + "type": "ui_group",
416 + "name": "TEM",
417 + "tab": "abb98f80600a5448",
418 + "order": 4,
419 + "disp": true,
420 + "width": "6",
421 + "collapse": false,
422 + "className": ""
423 + },
424 + {
425 + "id": "3f5d139f158d7c1c",
426 + "type": "ui_group",
427 + "name": "HUM",
428 + "tab": "abb98f80600a5448",
429 + "order": 2,
430 + "disp": true,
431 + "width": "6",
432 + "collapse": false,
433 + "className": ""
434 + },
435 + {
436 + "id": "abb98f80600a5448",
437 + "type": "ui_tab",
438 + "name": "LG01v2",
439 + "icon": "LG01v2",
440 + "disabled": false,
441 + "hidden": false
442 + }
443 +]
image-20230504095457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +412.6 KB
Content
image-20230504095502-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +412.6 KB
Content
image-20230504100722-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.5 KB
Content
image-20230506110646-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +383.1 KB
Content
image-20230506113332-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.6 KB
Content
image-20230506113432-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +36.5 KB
Content
image-20230506113531-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +403.2 KB
Content
image-20230506113602-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +26.7 KB
Content
image-20230506113623-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.4 KB
Content
image-20230506113705-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +40.9 KB
Content
image-20230506113722-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.2 KB
Content
image-20230506113737-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.2 KB
Content
image-20230506113813-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +39.5 KB
Content
image-20230506113831-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +32.2 KB
Content
image-20230506114127-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +56.1 KB
Content
image-20230506115438-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +413.6 KB
Content
image-20230620103153-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +127.6 KB
Content
image-20230620103535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +156.3 KB
Content
image-20230620103923-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +72.7 KB
Content
image-20231014092843-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +596 bytes
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0