Summary

• Page properties (2 modified, 0 added, 0 removed)
• Attachments (0 modified, 21 added, 0 removed)
  • LG01v2_LSN50v2_S31.json
  • Log-Temperature-Sensor-and-send-data-to-Node-red.json
  • image-20230504095457-1.png
  • image-20230504095502-2.png
  • image-20230504100722-3.png
  • image-20230506110646-1.png
  • image-20230506113332-2.png
  • image-20230506113432-3.png
  • image-20230506113531-4.png
  • image-20230506113602-5.png
  • image-20230506113623-6.png
  • image-20230506113705-7.png
  • image-20230506113722-8.png
  • image-20230506113737-9.png
  • image-20230506113813-10.png
  • image-20230506113831-11.png
  • image-20230506114127-12.png
  • image-20230506115438-13.png
  • image-20230620103153-1.png
  • image-20230620103535-2.png
  • image-20230620103923-3.png

Details

Page properties

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.Edwin
	1	+XWiki.Kilight

Content

...	...	@@ -11,26 +11,33 @@
11	11
12	12	{{toc/}}
13	13
14		-= **1. Introduction** =
15	15
16	16
17		-== **1.1 What is LG01-V2** ==
18	18
19	19
	18	+
	19	+= 1. Introduction =
	20	+
	21	+== 1.1 What is LG01v2 ==
	22	+
	23	+
20	20	(((
21	21	(((
22		-The LG01-V2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
	26	+The LG01v2 is an (% style="color:blue" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
	27	+
	28	+LG01v2 is specially design for (% style="color:blue" %)**peer to peer LoRa**(%%) protocol instead of LoRaWAN protocol. The LG01v2 use single channel LoRa module to minimize the deployment cost for a private p2p LoRa wireless network.
23	23	)))
24	24
25	25	(((
26		-LG01-V2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
	32	+LG01v2 uses Open Source Linux system. User can modify the Linux part and develop customize software base on it. It has (% style="color:blue" %)**1.2Ghz Quad-Core CPU**(%%) , (% style="color:blue" %)**4GB eMMC storage**(%%) and (% style="color:blue" %)**512MB RAM**(%%) for most application.
	33	+
	34	+LG01v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
27	27	)))
28	28
29	29
	38	+== 1.2 Specifications ==
30	30
31		-== **1.2 Specifications** ==
32	32
33		-
34	34	(% style="color:#037691" %)**Hardware System:**
35	35
36	36	* CPU: Quad-core Cortex-A7 1.2Ghz
...	...	@@ -48,7 +48,7 @@
48	48	* Storage Temperature: -20 ~~ 65°C
49	49	* Power Input: 5V, 2A, DC
50	50
51		-== **1.3 Features** ==
	58	+== 1.3 Features ==
52	52
53	53
54	54	* Open Source Debian system
...	...	@@ -56,69 +56,65 @@
56	56	* Remote Management
57	57	* Auto-provisioning for batch deployment and management
58	58	* LoRa Gateway
59		-* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
60	60	* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
61	61
62		-== **1.4 Block Diagram** ==
	68	+== 1.4 Block Diagram ==
63	63
64	64
65	65
66		-== **1.5 LED Indicators** ==
	72	+== 1.5 LED Indicators ==
67	67
68	68
69	69	LG01-V2 has totally four LEDs, They are:
70	70
71	71
72		-(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
	78	+(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
73	73
74		-(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
	80	+(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
75	75
76		-(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
	82	+(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
77	77
78		-// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
	84	+ ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
79	79
80		-// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
	86	+ ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
81	81
82		-// ✓** SOLID RED:** Device doesn't have an Internet connection.//
	88	+ ✓** SOLID RED:** Device doesn't have an Internet connection.
83	83
84		-(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
	90	+(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
85	85
86	86
	93	+== 1.6 Button Intruction ==
87	87
88		-== **1.6 Button Intruction** ==
89	89
90		-
91	91	LG01-V2 has a black toggle button, which is:
92	92
93	93
94		-(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
	99	+(% style="color:blue" %)**➢ Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
95	95
96		- // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
	101	+ **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
97	97
98	98
99		-(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
	104	+(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
100	100
101		- //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
	106	+ **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
102	102
103	103
	109	+= 2. Quick Start =
104	104
105		-= **2. Quick Start** =
106	106
107		-
108	108	The LG01-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
109	109
110	110	In most cases, the first thing you need to do is make the LG01-v2 accessible to the network.
111	111
112	112
113		-== **2.1 Connects to the network and accesses the gateway Web UI** ==
	117	+== 2.1 Access and Configure LG01-v2 ==
114	114
	119	+=== 2.1.1 Find IP address of LG01-v2 ===
115	115
116		-== **2.1.1 connect the network.** ==
117	117
	122	+==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
118	118
119		-=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
120	120
121		-
122	122	Connect the LG01-V2 Ethernet port to your router and LG01-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01-V2.
123	123
124	124	You can also use this IP to connect.
...	...	@@ -126,10 +126,38 @@
126	126
127	127	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100129-1.png?width=1263&height=332&rev=1.1||alt="image-20220622100129-1.png"]]
128	128
	132	+==== (% style="color:blue" %)**Method 2**(%%):  Connect via LG01v2 Fallback IP ====
129	129
130		-=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
	134	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230107084650-2.png?width=839&height=310&rev=1.1||alt="image-20230107084650-2.png" height="284" width="769"]]
131	131
132	132
	137	+**Steps to connect via fallback IP:**
	138	+
	139	+~1. Connect the PC's Ethernet port to LG01v2's WAN port
	140	+
	141	+2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
	142	+
	143	+**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
	144	+
	145	+
	146	+As in the below photo:
	147	+
	148	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413172038-1.png?width=1243&height=732&rev=1.1||alt="image-20230413172038-1.png" height="624" width="1059"]]
	149	+
	150	+
	151	+Configure computer Ethernet port steps video: **[[fallback ip.mp4>>url:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/fallback%20ip.mp4?rev=1.1]]**
	152	+
	153	+If you still can't access the LG01v2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/LG01v2/#H10.1A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
	154	+
	155	+3. In the PC, use IP address 172.31.255.254 to access the LG01v2 via Web or Console.
	156	+
	157	+[[image:image-20230506115438-13.png||height="554" width="1047"]]
	158	+
	159	+
	160	+
	161	+==== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ====
	162	+
	163	+
133	133	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100542-2.png?width=1256&height=369&rev=1.1||alt="image-20220622100542-2.png"]]
134	134
135	135
...	...	@@ -136,74 +136,111 @@
136	136	Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
137	137
138	138
139		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102702-6.png?rev=1.1||alt="image-20220622102702-6.png"]]
	170	+[[image:image-20230506113332-2.png]]
140	140
141	141
142	142	**Wi-Fi configuration successful**
143	143
144	144
145		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102847-7.png?rev=1.1||alt="image-20220622102847-7.png"]]
	176	+[[image:image-20230506113432-3.png||height="397" width="855"]]
146	146
147	147
	179	+=== 2.1.2 Access Configure Web UI ===
148	148
149		-= **3. Web Configure Pages** =
150	150
151		-== **3.1 Home** ==
	182	+**Web Interface**
152	152
153		-//Shows the system running status~://
	184	+Open a browser on the PC and type the LG01v2 ip address (depends on your connect method)
154	154
155		-[[image:image-20221104155612-1.png||height="497" width="942"]]
156	156
	187	+[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
157	157
158		-== **3.2 Network Settings** ==
	189	+You will see the login interface of LG01v2 as shown below.
159	159
	191	+The account details for Web Login are:
160	160
161		-=== **3.2.1 Network ~-~-> WiFi** ===
	193	+(% style="color:#4f81bd" %)**User Name: root**
162	162
	195	+(% style="color:#4f81bd" %)**Password:   dragino**
163	163
164		-[[image:image-20221104155654-2.png||height="319" width="813"]]
	197	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230106153501-1.png?width=894&height=367&rev=1.1||alt="image-20230106153501-1.png"]]
165	165
166	166
	200	+= 3. Web Configure Pages =
167	167
168		-=== **3.4.2 Network ~-~-> System Status** ===
	202	+== 3.1 Home ==
169	169
170	170
171		-[[image:image-20221104155724-3.png||height="679" width="861"]]
	205	+Shows the system running status:
172	172
	207	+[[image:image-20230506113531-4.png||height="430" width="818"]]
173	173
174	174
175		-=== **3.4.3 Network ~-~-> Firewall** ===
	210	+== 3.2 Network Settings ==
176	176
	212	+=== 3.2.1 Network ~-~-> WiFi ===
177	177
178		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616115351-6.png?width=661&height=244&rev=1.1||alt="image-20220616115351-6.png"]]
179	179
	215	+[[image:image-20230506113602-5.png]]
180	180
181	181
182		-== **3.5 System** ==
	218	+=== 3.4.2 Network ~-~-> System Status ===
183	183
184	184
185		-=== **3.5.1  System ~-~-> System Overview** ===
	221	+[[image:image-20230506113623-6.png||height="511" width="672"]]
186	186
187	187
	224	+== 3.5 System ==
	225	+
	226	+=== 3.5.1  System ~-~-> System Overview ===
	227	+
	228	+
188	188	Shows the system info:
189	189
190		-[[image:image-20221104155907-4.png]]
	231	+[[image:image-20230506113705-7.png]]
191	191
192	192
	234	+=== 3.5.2 System ~-~-> Backup/Restore ===
193	193
194		-=== **3.5.2 System ~-~-> Backup/Restore** ===
195	195
	237	+[[image:image-20230506113722-8.png||height="254" width="797"]]
196	196
197		-[[image:image-20221104155928-5.png||height="334" width="880"]]
198	198
	240	+=== 3.5.3 System ~-~-> System General ===
199	199
200		-= (% id="cke_bm_1978S" style="display:none" %)** **(%%)**4. Build in Server** =
201	201
	243	+In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
202	202
	245	+In addition, Users can customize the FallBack IP address.
	246	+
	247	+[[image:image-20230506113813-10.png||height="659" width="749"]]
	248	+
	249	+
	250	+=== 3.5.4 System ~-~-> Remoteit ===
	251	+
	252	+
	253	+In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
	254	+
	255	+the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
	256	+
	257	+[[image:image-20230506113831-11.png||height="567" width="748"]]
	258	+
	259	+
	260	+=== 3.5.5 System ~-~-> Package Management ===
	261	+
	262	+
	263	+In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
	264	+
	265	+[[image:image-20230506114127-12.png||height="803" width="762"]]
	266	+
	267	+
	268	+= (% id="cke_bm_1978S" style="display:none" %) (%%)4. Build in Server =
	269	+
	270	+
203	203	The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
204	204
205	205
206		-[[image:image-20221104155949-6.png||height="315" width="1023"]]
	274	+[[image:image-20230506113737-9.png]]
207	207
208	208
209	209	(% style="color:red" %)**Note:**
...	...	@@ -211,18 +211,16 @@
211	211	**Path**: System ~-~-> Built-in Server
212	212
213	213
214		-**Troubleshooting:**
	282	+(% style="color:blue" %)**Troubleshooting：**
215	215
216		-
217	217	**~ 1. URL does not jump properly**
218	218
219	219	For the Node-Red, you can use the local IP address and the port is 1880 to access it.
220	220
221	221
	289	+== 4.1 Application Server ~-~- Node-Red ==
222	222
223		-== **4.1 Application Server ~-~- Node-Red** ==
224	224
225		-
226	226	You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
227	227
228	228
...	...	@@ -232,12 +232,24 @@
232	232	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
233	233
234	234
235		-= **5. How to configure the Lora Gateway** =
	301	+= 5. How to configure the Lora Gateway =
236	236
	303	+== 5.1 Configure and Debug LoRa wireless of LG01v2 ==
237	237
238		-== **5.1 Access the Lora configuration page** ==
239	239
	306	+First, the user needs to access the Linux console of LG01v2 via ssh
240	240
	308	+**IP address:  (% style="color:blue" %)IP address of LG01v2(%%)**
	309	+
	310	+**Port:  (% style="color:blue" %)22(%%)**
	311	+
	312	+**User Name:   (% style="color:blue" %)root(%%)**
	313	+
	314	+**Password:  (% style="color:blue" %)dragino(default)(%%)**
	315	+
	316	+[[image:image-20230504100722-3.png||height="228" width="908"]]
	317	+
	318	+
241	241	Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**:
242	242
243	243	(% class="box infomessage" %)
...	...	@@ -258,7 +258,9 @@
258	258	)))
259	259
260	260
261		-(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**(%%)
	339	+(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**
	340	+
	341	+
262	262	(% style="color:red" %)[[image:image-20221029174703-3.png]]
263	263
264	264
...	...	@@ -267,26 +267,27 @@
267	267
268	268	(% class="box infomessage" %)
269	269	(((
270		-AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
271		-AT+GROUPMOD=0,0  ~-~--> TX and RX group
272		-AT+BW=0,0  ~-~--> TX and RX Bandwidth
273		-AT+SF=12,12  ~-~--> TX and RX Spreading Factor
274		-AT+POWER=14  ~-~--> TX Power Range
275		-AT+CRC=1,1  ~-~--> TX and RX CRC Type
276		-AT+HEADER=0,0  ~-~--> TX and RX Header Type
277		-AT+CR=1,1  ~-~--> TX and RX Coding Rate
278		-AT+IQ=0,0  ~-~--> TX and RX InvertIQ
279		-AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length
280		-AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
281		-AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
282		-AT+RXDAFORM=1
	350	+**AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
	351	+AT+GROUPMOD=0,0  ~-~-->  TX and RX group
	352	+AT+BW=0,0  ~-~-->  TX and RX Bandwidth
	353	+AT+SF=12,12  ~-~-->  TX and RX Spreading Factor
	354	+AT+POWER=14  ~-~-->  TX Power Range
	355	+AT+CRC=1,1  ~-~-->  TX and RX CRC Type
	356	+AT+HEADER=0,0  ~-~-->  TX and RX Header Type
	357	+AT+CR=1,1  ~-~-->  TX and RX Coding Rate
	358	+AT+IQ=0,0  ~-~-->  TX and RX InvertIQ
	359	+AT+PREAMBLE=8,8  ~-~-->  TX and RX Preamble Length
	360	+AT+SYNCWORD=0  ~-~-->  Syncword(0: private，1: public)
	361	+AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
	362	+AT+RXDAFORM=1**
283	283	)))
284	284
285	285
286		-== **5.2 Example: LG01v2** ==
	366	+== 5.2 Example: LG01v2 ==
287	287
288		-=== **5.2.1 Introduce for the example:** ===
	368	+=== 5.2.1 Introduce for the example: ===
289	289
	370	+
290	290	[[image:image-20221104102736-3.png||height="282" width="723"]]
291	291
292	292
...	...	@@ -295,12 +295,12 @@
295	295	* **LA66 Shield + UNO + DHT11**: The UNO will get the temperature and humidity and broadcast the value via LoRa protocol.
296	296	* **LG01v2** : LG01v2 is set to listening the LoRa Channel which LA66 is broadcasting. When LG01v2 get the data from LA66, LG01v2 will plot the data in built-in IoT server.
297	297
298		-
299	299	=== 5.2.2 Set Up LA66 Shield + UNO ===
300	300
301	301
302	302	==== **Set up LA66 Module** ====
303	303
	384	+
304	304	LA66 Module is loaded with the firmware **[[LA66 Peer-to-Peer firmware>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]] **and user can use AT Command to set up LA66 with below parameters:
305	305
306	306	(((
...	...	@@ -325,10 +325,13 @@
325	325	)))
326	326
327	327
	409	+
328	328	==== **Set up Arduino UNO** ====
329	329
330		-(% id="cke_bm_1033249S" style="display:none" %)** **(%%)**Hardware Connection**
	412	+(% id="cke_bm_1033249S" style="display:none" %)** **
331	331
	414	+**Hardware Connection**
	415	+
332	332	(% class="box infomessage" %)
333	333	(((
334	334	**The DHT11 sensor connects to the LA66 Shield:**
...	...	@@ -341,13 +341,17 @@
341	341	[[image:image-20221108170731-5.png||height="588" width="441"]]
342	342
343	343
	428	+
344	344	===== **1. Open Arduino IDE** =====
345	345
	431	+
346	346	[[image:image-20221108172149-6.png||height="650" width="542"]]
347	347
348	348
	435	+
349	349	===== **2. Open project** =====
350	350
	438	+
351	351	Users can download Arduino files from this link: [[attach:Log-Temperature-Sensor-and-send-data-to-Node-red.ino||target="_blank"]]
352	352
353	353	Then click Compile and Upload to LA66 Shield,
...	...	@@ -355,19 +355,21 @@
355	355	[[image:image-20221108172432-7.png]]
356	356
357	357
	446	+
358	358	===== **3. Open the Serial Monitor to check the LA66 Shield data** =====
359	359
	449	+
360	360	The UNO will now reads the temperature and humidity data from the sensor and broadcast it via LoRa wireless,
361	361
362	362	[[image:image-20221108174840-8.png||height="731" width="671"]]
363	363
364	364
	455	+
365	365	Sending out data as below.
366	366
367	367	[[image:image-20221108175113-9.png||height="556" width="998"]]
368	368
369	369
370		-
371	371	=== 5.2.3 Set Up LG01v2 ===
372	372
373	373
...	...	@@ -389,12 +389,13 @@
389	389	AT+IQ=0,0  ~-~--> TX and RX InvertIQ
390	390	AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
391	391	AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
392		-AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode, RX window always open
	482	+AT+RXMOD=65535,2  ~-~-->  Rx Timeout and Reply mode, RX window always open**(0:No ACK, 1:Reply mode, 2:Send an ACK once got a message from another device. ACK Content is 0x00 FF )**
393	393	)))
394	394
395	395
396	396	=== 5.2.4 Test result ===
397	397
	488	+
398	398	After the above configuration is complete, users can send test simulation data to check whether the configuration is correct, In LA66 sheild serial console send:(% style="color:red" %)**(AT+SEND=1,hello world,2,3).**
399	399	)))
400	400
...	...	@@ -403,17 +403,18 @@
403	403	[[image:image-20221108164413-2.png]]
404	404
405	405
	497	+
406	406	In the real-time log of LG01v2：
407	407
408	408	[[image:image-20221108170314-3.png]]
409	409
410	410
411		-=== **5.2.5 Plot data chart in LG01v2** ===
	503	+=== 5.2.5 Plot data chart in LG01v2 ===
412	412
413	413
414	414	User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
415	415
416		-User can import this example in Node-Red: [[attach:Log-Temperature-Sensor-and-send-data-to-node-red.json||target="_blank"]]
	508	+User can import this example in Node-Red: [[attach:Log-Temperature-Sensor-and-send-data-to-Node-red.json||target="_blank"]]
417	417
418	418	[[image:image-20221108180334-10.png||height="651" width="1141"]]
419	419
...	...	@@ -425,52 +425,26 @@
425	425	[[image:image-20221108180458-11.png||height="402" width="1137"]]
426	426
427	427
428		-= (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**v(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
429	429
	521	+= 6. OTA System Update =
430	430
431		-(% style="color:blue" %)**USB TTL to LG01-V2  Connection:**
432	432
	524	+LG01v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
433	433
434		-Port 1 of the UART on the LG01-V2 is GND
435	435
436		-(% class="box infomessage" %)
437		-(((
438		-**TXD  <~-~--> UART RXD (Gray line)**
	527	+= 7. FAQ =
439	439
440		-**RXD  <~-~--> UART TXD (White line)**
	529	+== 7.1 How does LG01v2 communicate with Lora shield (LoRa.h) ==
441	441
442		-**GND <~-~--> GND (Black line)**
443		-)))
444	444
	532	+This example describes how to use LG01v2, LoRa Shield to set up a LoRa network,
445	445
446		-**LG01-V2 UART connection photo**
447		-
448		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
449		-
450		-
451		-
452		-In the PC, you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LG01v2. LG01v2 will output system info once power on as below:
453		-
454		-
455		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
456		-
457		-[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
458		-
459		-
460		-= **7. FAQ** =
461		-
462		-
463		-== **7.1 How does LG01-V2 communicate with Lora shield (LoRa.h)** ==
464		-
465		-
466		-This example describes how to use LG01-V2, LoRa Shield to set up a LoRa network,
467		-
468	468	[[image:image-20221103152238-8.png||height="251" width="654"]]
469	469
470	470
471		-(% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
	537	+(% style="color:red" %)**Prerequisites: The configurations of LG01v2 and Lora shield must match**
472	472
473		-**LG01-V2 configuration:**
	539	+**LG01v2 configuration:**
474	474
475	475	(% class="box infomessage" %)
476	476	(((
...	...	@@ -488,6 +488,8 @@
488	488	AT+RXDAFORM=1
489	489	)))
490	490
	557	+
	558	+
491	491	**Lora shield configuration:**
492	492
493	493	Lora Shield example: [[attach:LoRa_Shield_Sketch_For_MQTT.ino||target="_blank"]] , [[attach:arduino-LoRa-master.zip||target="_blank"]]
...	...	@@ -495,27 +495,30 @@
495	495	[[image:image-20221101161318-2.png]]
496	496
497	497
498		-**Test LG01-V2 to receive Lora Shield data:**
499	499
	567	+**Test LG01v2 to receive Lora Shield data:**
	568	+
500	500	[[image:image-20221101161951-3.png]]
501	501
502	502
503		-**Test the LG01-V2 to send data:**
504	504
	573	+**Test the LG01v2 to send data:**
	574	+
505	505	[[image:image-20221101162527-4.png]]
506	506
507	507
508		-== **7.2 How does LG01-V2 communicate with Heltec LoRa Node** ==
	578	+== 7.2 How does LG01v2 communicate with Heltec LoRa Node ==
509	509
510	510
511		-This example describes how to use LG01-V2 and Heltec LoRa Node to set up a LoRa network,
	581	+This example describes how to use LG01v2 and Heltec LoRa Node to set up a LoRa network,
512	512
513	513	[[image:image-20221112161111-2.png||height="258" width="692"]]
514	514
515		-(% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
	585	+(% style="color:red" %)**Prerequisites: The configurations of LG01v2 and Lora shield must match**
516	516
517		-**LG01-V2 configuration:**
518	518
	588	+**LG01v2 configuration:**
	589	+
519	519	(% class="box infomessage" %)
520	520	(((
521	521	AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
...	...	@@ -532,6 +532,7 @@
532	532	AT+RXDAFORM=1  ~-~--> RX data format**（0: Hex ,1: String）**
533	533	)))
534	534
	606	+
535	535	After we upload the sketch to Heltec LoRa Node, we can see below output from Arduino.
536	536
537	537	Lora Shield example: [[attach:LoRa_send_trial.ino||target="_blank"]]
...	...	@@ -543,55 +543,143 @@
543	543
544	544	[[image:image-20221112163119-4.png||height="808" width="560"]]
545	545
546		-= (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
547	547
	619	+== 7.3 How does LG01v2 communicate with LoRaWAN node ==
548	548
	621	+
	622	+This example describes how to use LG01v2 and LSN50 to set up a  network,
	623	+
	624	+In this case, users need to set LSN50 to work in ABP mode and transmit in only one frequency.
	625	+
	626	+Assume we have a LG01v2 working in the frequency 868100000 now, below is the steps.
	627	+
	628	+
	629	+**Step1: **Configure the LG01v2
	630	+
	631	+(% class="box infomessage" %)
549	549	(((
550		-**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
	633	+AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
	634	+AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
	635	+AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
	636	+AT+SYNCWORD=1  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
551	551	)))
552	552
	639	+**Step2:  **Run AT commands to make the LSN50 work in Single frequency and ABP mode. Below are the AT commands:
	640	+
	641	+(% class="box infomessage" %)
553	553	(((
554		-**//With your question as detailed as possible. We will reply and help you in the shortest.//**
	643	+AT+FDR  ~-~--> Reset Parameters to Factory Default, Keys Reserve
	644	+AT+NJM=0  ~-~-->  Set to ABP mode
	645	+AT+ADR=0  ~-~-->  Set the Adaptive Data Rate Off
	646	+AT+DR=0  ~-~--> Set Data Rate (Set AT+DR=3 for 915 band)
	647	+AT+TDC=300000  ~-~-->  Set transmit interval to 5 minutes
	648	+AT+CHS=868100000  ~-~--> Set transmit frequency to 868.1Mhz
	649	+AT+DADDR=FFFFF111  ~-~--> Set Device Address to 26 01 1A F1
	650	+ATZ  ~-~--> Reset MCU
	651	+)))
555	555
	653	+**Step3:  **Check result
556	556
557	557
558		-= **9. Reference** =
559	559
	657	+User can plot the temperature and humidity chat via LG01v2 built-in IoT server.
560	560
561		-* Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
562		-* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
	659	+User can import this example in Node-Red: [[attach:LG01v2_LSN50v2_S31.json||target="_blank"]]
563	563
	661	+
	662	+First the user needs to fill in the NwkSkey and AppSkey in the LoraWan Packet Decrypter node.
	663	+
	664	+[[image:image-20230620103535-2.png||height="591" width="1138"]]
	665	+
	666	+[[image:image-20230620103153-1.png||height="610" width="1141"]]
	667	+
	668	+
	669	+The data will be displayed in the built-in node-red UI
	670	+
	671	+**Browser input: (% style="background-color:yellow" %)__//http:~/~/<local-IPV4-address>//__(%%)**
	672	+
	673	+[[image:image-20230620103923-3.png||height="476" width="1138"]]
	674	+
	675	+
	676	+== 7.4 How can users factory reset LG01v2 ==
	677	+
	678	+
	679	+Users can download the image of LG01v2 from this link：[[dragino-lg01v2-1.7-0210>>url:https://www.dropbox.com/home?select=dragino-lg01v2-1.7-0210.zip&preview=dragino-lg01v2-1.7-0210.zip]]
	680	+
	681	+
	682	+Then follow the steps in the link below to restore factory Settings to LG01v2：
	683	+
	684	+[[How to flash a new image(OS) to the gateway>>url:https://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
	685	+
	686	+
	687	+= 8. Trouble Shooting =
	688	+
	689	+== 8.1  Fallback IP does not work, how can users check ==
	690	+
	691	+
	692	+When the computer has completed the above fallback IP configuration,the LG01v2 Web UI is still not accessible via fallback IP.
	693	+
	694	+
	695	+**1.Check whether the configuration is correct**
	696	+
	697	+Run the CMD command to ipconfig and ping 172.31.255.254.
	698	+
	699	+If this fails, the user needs to reconfigure.
	700	+
	701	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413170224-3.png?width=707&height=433&rev=1.1||alt="image-20230413170224-3.png"]]
	702	+
	703	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20230413170246-4.png?rev=1.1||alt="image-20230413170246-4.png"]]
	704	+
	705	+
	706	+**2. Check whether the firewall is disabled**
	707	+
	708	+If the firewall is not down, this will affect access to the gateway.
	709	+
	710	+
	711	+= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
	712	+
	713	+
	714	+(((
	715	+If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
	716	+)))
	717	+
	718	+(((
	719	+With your question as detailed as possible. We will reply and help you in the shortest.
	720	+
	721	+
	722	+= 10. Reference =
	723	+
	724	+
	725	+* Install Tago Core: Refer **Install Tago Core in LG01v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
	726	+
	727	+* [[Advance OS Reference Guide for L>>doc:Main.Armbian OS instruction.WebHome]]G01v2.
	728	+
564	564
565	565	)))
566	566
567		-= **10. Order Info** =
	732	+= 11. Order Info =
568	568
569	569
570		-(% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
	735	+(% style="color:#0000ff" %)**LG01v2-XXX-YYY**
571	571
572	572	(% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
573	573
574		-* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
575		-* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
576		-* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
577		-* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
578		-* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
579		-* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
	739	+* (% style="color:red" %)**868**(%%): For frequency : 863 ~~ 870Mhz
	740	+* (% style="color:red" %)**915**(%%): For frequency : 902 ~~ 928Mhz
580	580
581	581	(% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
582	582
583		-* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
584		-* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
585		-* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
586		-* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
	744	+* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
	745	+* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America: Verizon, AT&T(FirstNet), U.S.Cellular; Canada: Telus
	746	+* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
	747	+* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
587	587
588	588	More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
589	589
590	590
	752	+= 12. Manufacturer Info =
591	591
592		-= **10. Manufacturer Info** =
593	593
594		-
595	595	**Shenzhen Dragino Technology Development co. LTD**
596	596
597	597	Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
...	...	@@ -599,10 +599,9 @@
599	599	LongCheng Street, LongGang District ; Shenzhen 518116,China
600	600
601	601
	762	+= 13. FCC Warning =
602	602
603		-= **11. FCC Warning** =
604	604
605		-
606	606	(((
607	607	This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
608	608	)))
...	...	@@ -632,7 +632,6 @@
632	632	(((
633	633	The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
634	634
	794	+
635	635
636	636	)))
637		-
638		-~)~)~)

LG01v2_LSN50v2_S31.json

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+16.5 KB

Content

...	...	@@ -1,0 +1,587 @@
	1	+[
	2	+ {
	3	+ "id": "5e07f5eeeb2a969b",
	4	+ "type": "tab",
	5	+ "label": "流程 1",
	6	+ "disabled": false,
	7	+ "info": "",
	8	+ "env": []
	9	+ },
	10	+ {
	11	+ "id": "9c26fa2f19e2b556",
	12	+ "type": "function",
	13	+ "z": "5e07f5eeeb2a969b",
	14	+ "name": "hex to base64",
	15	+ "func": "var input = msg.payload;\nvar base64 = Buffer.from(input, 'hex').toString('base64');\nmsg.payload = base64;\nreturn msg;",
	16	+ "outputs": 1,
	17	+ "noerr": 0,
	18	+ "initialize": "",
	19	+ "finalize": "",
	20	+ "libs": [],
	21	+ "x": 220,
	22	+ "y": 160,
	23	+ "wires": [
	24	+ [
	25	+ "075bc9172a4c6570",
	26	+ "3601a98894805fbe"
	27	+ ]
	28	+ ]
	29	+ },
	30	+ {
	31	+ "id": "ee0480c81e66d657",
	32	+ "type": "function",
	33	+ "z": "5e07f5eeeb2a969b",
	34	+ "name": "function 4",
	35	+ "func": "var bytes = msg.payload[\"uplink_message\"]\nvar data = msg.payload[\"out\"]\nvar mode = (parseInt(data.substring(12, 14), 16) & 0x7C) >> 2;\nif (mode != 2)\n{\nvar bat = (parseInt(data.substring(0,4),16)&0x3FFF)/1000;\nvar TempC1 = (parseFloat(parseInt(data.substring(4, 8),16)/10).toFixed(2));\nvar ADC_CH0V = (parseInt(data.substring(8, 12), 16) ) / 1000;\nvar Digital_IStatus = (parseInt((data.substring(8, 12),16) & 0x02))?\"H\":\"L\"; \n\nif (mode != 6) {\n\n var EXTI_Trigger = ((parseInt(data.substring(12, 14), 16) & 0x01))? \"TRUE\" : \"FALSE\";\n\n var Door_status = ((parseInt(data.substring(12, 14), 16) & 0x80))? \"CLOSE\" : \"OPEN\";\n\n}\n}\nif (mode == 0) {\n\n var Work_mode = \"IIC\";\n\n if ((parseInt(data.substring(18, 22), 16)) == 0){\n\n var Illum = (parseInt(data.substring(8, 12), 16));\n\n }\n\n else {\n\n var TempC_SHT = parseFloat(((parseInt(data.substring(14, 18), 16)) / 10).toFixed(2));\n\n var Hum_SHT = parseFloat((((parseInt(data.substring(18, 22), 16))) / 10).toFixed(1));\n\n }\n \n}\n\nelse if (mode == 1) {\n\n var Work_mode = \" Distance\";\n\n var Distance_cm = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(1));\n\n if (((parseInt(data.substring(18, 22), 16))) != 65535){\n\n var Distance_signal_strength = parseFloat(((parseInt(data.substring(18, 22), 16))).toFixed(0));\n\n }\n\n}\n\nelse if (mode == 2) {\n\n var Work_mode = \" 3ADC\";\n\n var BatV = (parseInt(data.substring(18, 22), 16)) / 10;\n\n var ADC_CH0V = ((parseInt(data.substring(0, 4), 16))) / 1000;\n\n var ADC_CH1V = ((parseInt(data.substring(4, 8), 16))) / 1000;\n\n var ADC_CH4V = ((parseInt(data.substring(8, 12), 16))) / 1000;\n\n var Digital_IStatus = ((parseInt(data.substring(12, 14), 16)) & 0x02) ? \"H\" : \"L\";\n\n var EXTI_Trigger = ((parseInt(data.substring(12, 14), 16)) & 0x01) ? \"TRUE\" : \"FALSE\";\n\n var Door_status = ((parseInt(data.substring(13, 14), 16)) & 0x80) ? \"CLOSE\" : \"OPEN\";\n\n if ((parseInt(data.substring(18, 22), 16) === 0)) {\n\n var Illum = ((parseInt(data.substring(14, 18), 16)));\n\n }\n\n else {\n\n var TempC_SHT = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(2));\n\n var Hum_SHT = parseFloat((((parseInt(data.substring(18, 24), 16))) / 10).toFixed(1));\n\n }\n\n}\n\nelse if (mode == 3) {\n\n var Work_mode = \"3DS18B20\";\n\n var TempC2 = parseFloat((((parseInt(data.substring(14, 18), 16))) / 10).toFixed(2));\n\n var TempC3 = parseFloat((((parseInt(data.substring(18, 24), 16))) / 10).toFixed(1));\n\n\n\n}\n\nelse if (mode == 4) {\n\n var Work_mode = \"Weight\";\n\n var Weight = ((parseInt(data.substring(14, 18), 16)));\n\n}\n\nelse if (mode == 5) {\n\n var Work_mode = \"Count\";\n\n var Count = ((parseInt(data.substring(14, 22), 16)));\n\n}\n\n\n\nvar b = { payload: bat }, c = { payload: TempC1 }, d = { payload: ADC_CH0V }, e = { payload: Digital_IStatus }, f = { payload: EXTI_Trigger }, g = { payload: Door_status }, j = { payload: TempC_SHT }, s = { payload: Hum_SHT }, k = { payload: Work_mode };\nreturn [b,c,d,e,f,g,j,k,s];",
	36	+ "outputs": 9,
	37	+ "noerr": 0,
	38	+ "initialize": "",
	39	+ "finalize": "",
	40	+ "libs": [],
	41	+ "x": 660,
	42	+ "y": 300,
	43	+ "wires": [
	44	+ [
	45	+ "fd22b92d2b8de0fb"
	46	+ ],
	47	+ [
	48	+ "3307256a4e1ea53a"
	49	+ ],
	50	+ [
	51	+ "a3fd8302ec399e31"
	52	+ ],
	53	+ [
	54	+ "c7d1f63ff5f0026a"
	55	+ ],
	56	+ [
	57	+ "159967056da52706"
	58	+ ],
	59	+ [
	60	+ "a21581a41adc1714"
	61	+ ],
	62	+ [
	63	+ "7bb78b78445ac9e3"
	64	+ ],
	65	+ [
	66	+ "0364752170ed6228"
	67	+ ],
	68	+ [
	69	+ "65293155d71d54b9"
	70	+ ]
	71	+ ]
	72	+ },
	73	+ {
	74	+ "id": "e763b293d42dbdd5",
	75	+ "type": "change",
	76	+ "z": "5e07f5eeeb2a969b",
	77	+ "name": "",
	78	+ "rules": [
	79	+ {
	80	+ "t": "change",
	81	+ "p": "payload",
	82	+ "pt": "msg",
	83	+ "from": "Data: (HEX:)",
	84	+ "fromt": "str",
	85	+ "to": "",
	86	+ "tot": "str"
	87	+ },
	88	+ {
	89	+ "t": "change",
	90	+ "p": "payload",
	91	+ "pt": "msg",
	92	+ "from": " ",
	93	+ "fromt": "str",
	94	+ "to": "",
	95	+ "tot": "str"
	96	+ }
	97	+ ],
	98	+ "action": "",
	99	+ "property": "",
	100	+ "from": "",
	101	+ "to": "",
	102	+ "reg": false,
	103	+ "x": 420,
	104	+ "y": 60,
	105	+ "wires": [
	106	+ [
	107	+ "9c26fa2f19e2b556",
	108	+ "416a930e89291528"
	109	+ ]
	110	+ ]
	111	+ },
	112	+ {
	113	+ "id": "075bc9172a4c6570",
	114	+ "type": "lorawan-packet-decrypt-nwkey-appkey",
	115	+ "z": "5e07f5eeeb2a969b",
	116	+ "name": "FFFFF111",
	117	+ "nsw": "CCFFFFFFFFFFFFFFFFFFFFFFFFFFFFAA",
	118	+ "asw": "FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCC",
	119	+ "x": 510,
	120	+ "y": 160,
	121	+ "wires": [
	122	+ [
	123	+ "ee0480c81e66d657"
	124	+ ]
	125	+ ]
	126	+ },
	127	+ {
	128	+ "id": "13dc77a4e2bb4f72",
	129	+ "type": "serial in",
	130	+ "z": "5e07f5eeeb2a969b",
	131	+ "name": "",
	132	+ "serial": "bb1c0e81fd51fa9e",
	133	+ "x": 190,
	134	+ "y": 60,
	135	+ "wires": [
	136	+ [
	137	+ "e763b293d42dbdd5"
	138	+ ]
	139	+ ]
	140	+ },
	141	+ {
	142	+ "id": "3307256a4e1ea53a",
	143	+ "type": "ui_chart",
	144	+ "z": "5e07f5eeeb2a969b",
	145	+ "name": "",
	146	+ "group": "c1fddd37879528e5",
	147	+ "order": 1,
	148	+ "width": 0,
	149	+ "height": 0,
	150	+ "label": "TempC1",
	151	+ "chartType": "line",
	152	+ "legend": "false",
	153	+ "xformat": "HH:mm:ss",
	154	+ "interpolate": "linear",
	155	+ "nodata": "",
	156	+ "dot": false,
	157	+ "ymin": "",
	158	+ "ymax": "",
	159	+ "removeOlder": 1,
	160	+ "removeOlderPoints": "",
	161	+ "removeOlderUnit": "3600",
	162	+ "cutout": 0,
	163	+ "useOneColor": false,
	164	+ "useUTC": false,
	165	+ "colors": [
	166	+ "#1f77b4",
	167	+ "#aec7e8",
	168	+ "#ff7f0e",
	169	+ "#2ca02c",
	170	+ "#98df8a",
	171	+ "#d62728",
	172	+ "#ff9896",
	173	+ "#9467bd",
	174	+ "#c5b0d5"
	175	+ ],
	176	+ "outputs": 1,
	177	+ "useDifferentColor": false,
	178	+ "className": "",
	179	+ "x": 940,
	180	+ "y": 160,
	181	+ "wires": [
	182	+ []
	183	+ ]
	184	+ },
	185	+ {
	186	+ "id": "a3fd8302ec399e31",
	187	+ "type": "ui_chart",
	188	+ "z": "5e07f5eeeb2a969b",
	189	+ "name": "",
	190	+ "group": "6d46fdae9f413f7b",
	191	+ "order": 1,
	192	+ "width": 0,
	193	+ "height": 0,
	194	+ "label": "ADC_CH0V",
	195	+ "chartType": "line",
	196	+ "legend": "false",
	197	+ "xformat": "HH:mm:ss",
	198	+ "interpolate": "linear",
	199	+ "nodata": "",
	200	+ "dot": false,
	201	+ "ymin": "",
	202	+ "ymax": "",
	203	+ "removeOlder": 1,
	204	+ "removeOlderPoints": "",
	205	+ "removeOlderUnit": "3600",
	206	+ "cutout": 0,
	207	+ "useOneColor": false,
	208	+ "useUTC": false,
	209	+ "colors": [
	210	+ "#1f77b4",
	211	+ "#aec7e8",
	212	+ "#ff7f0e",
	213	+ "#2ca02c",
	214	+ "#98df8a",
	215	+ "#d62728",
	216	+ "#ff9896",
	217	+ "#9467bd",
	218	+ "#c5b0d5"
	219	+ ],
	220	+ "outputs": 1,
	221	+ "useDifferentColor": false,
	222	+ "className": "",
	223	+ "x": 950,
	224	+ "y": 200,
	225	+ "wires": [
	226	+ []
	227	+ ]
	228	+ },
	229	+ {
	230	+ "id": "fd22b92d2b8de0fb",
	231	+ "type": "ui_chart",
	232	+ "z": "5e07f5eeeb2a969b",
	233	+ "name": "",
	234	+ "group": "bb5657c2a8c290a3",
	235	+ "order": 1,
	236	+ "width": 0,
	237	+ "height": 0,
	238	+ "label": "BatV",
	239	+ "chartType": "line",
	240	+ "legend": "false",
	241	+ "xformat": "HH:mm:ss",
	242	+ "interpolate": "linear",
	243	+ "nodata": "",
	244	+ "dot": false,
	245	+ "ymin": "",
	246	+ "ymax": "",
	247	+ "removeOlder": 1,
	248	+ "removeOlderPoints": "",
	249	+ "removeOlderUnit": "3600",
	250	+ "cutout": 0,
	251	+ "useOneColor": false,
	252	+ "useUTC": false,
	253	+ "colors": [
	254	+ "#1f77b4",
	255	+ "#aec7e8",
	256	+ "#ff7f0e",
	257	+ "#2ca02c",
	258	+ "#98df8a",
	259	+ "#d62728",
	260	+ "#ff9896",
	261	+ "#9467bd",
	262	+ "#c5b0d5"
	263	+ ],
	264	+ "outputs": 1,
	265	+ "useDifferentColor": false,
	266	+ "className": "",
	267	+ "x": 930,
	268	+ "y": 120,
	269	+ "wires": [
	270	+ []
	271	+ ]
	272	+ },
	273	+ {
	274	+ "id": "c7d1f63ff5f0026a",
	275	+ "type": "ui_text",
	276	+ "z": "5e07f5eeeb2a969b",
	277	+ "group": "528e965cef294158",
	278	+ "order": 0,
	279	+ "width": "6",
	280	+ "height": "4",
	281	+ "name": "",
	282	+ "label": "Digital_IStatus",
	283	+ "format": "{{msg.payload}}",
	284	+ "layout": "col-center",
	285	+ "className": "",
	286	+ "x": 960,
	287	+ "y": 240,
	288	+ "wires": []
	289	+ },
	290	+ {
	291	+ "id": "159967056da52706",
	292	+ "type": "ui_text",
	293	+ "z": "5e07f5eeeb2a969b",
	294	+ "group": "5e615e3edb5999a0",
	295	+ "order": 0,
	296	+ "width": "6",
	297	+ "height": "4",
	298	+ "name": "",
	299	+ "label": "EXTI_Trigger",
	300	+ "format": "{{msg.payload}}",
	301	+ "layout": "col-center",
	302	+ "className": "",
	303	+ "x": 950,
	304	+ "y": 280,
	305	+ "wires": []
	306	+ },
	307	+ {
	308	+ "id": "7bb78b78445ac9e3",
	309	+ "type": "ui_chart",
	310	+ "z": "5e07f5eeeb2a969b",
	311	+ "name": "",
	312	+ "group": "5f7fec85295a7f7c",
	313	+ "order": 0,
	314	+ "width": 0,
	315	+ "height": 0,
	316	+ "label": "TempC_SHT",
	317	+ "chartType": "line",
	318	+ "legend": "false",
	319	+ "xformat": "HH:mm:ss",
	320	+ "interpolate": "linear",
	321	+ "nodata": "",
	322	+ "dot": false,
	323	+ "ymin": "",
	324	+ "ymax": "",
	325	+ "removeOlder": 1,
	326	+ "removeOlderPoints": "",
	327	+ "removeOlderUnit": "3600",
	328	+ "cutout": 0,
	329	+ "useOneColor": false,
	330	+ "useUTC": false,
	331	+ "colors": [
	332	+ "#1f77b4",
	333	+ "#aec7e8",
	334	+ "#ff7f0e",
	335	+ "#2ca02c",
	336	+ "#98df8a",
	337	+ "#d62728",
	338	+ "#ff9896",
	339	+ "#9467bd",
	340	+ "#c5b0d5"
	341	+ ],
	342	+ "outputs": 1,
	343	+ "useDifferentColor": false,
	344	+ "className": "",
	345	+ "x": 950,
	346	+ "y": 360,
	347	+ "wires": [
	348	+ []
	349	+ ]
	350	+ },
	351	+ {
	352	+ "id": "0364752170ed6228",
	353	+ "type": "ui_text",
	354	+ "z": "5e07f5eeeb2a969b",
	355	+ "group": "3cb616f18674c42a",
	356	+ "order": 0,
	357	+ "width": "6",
	358	+ "height": "4",
	359	+ "name": "",
	360	+ "label": "Work_mode",
	361	+ "format": "{{msg.payload}}",
	362	+ "layout": "col-center",
	363	+ "className": "",
	364	+ "x": 950,
	365	+ "y": 400,
	366	+ "wires": []
	367	+ },
	368	+ {
	369	+ "id": "65293155d71d54b9",
	370	+ "type": "ui_chart",
	371	+ "z": "5e07f5eeeb2a969b",
	372	+ "name": "",
	373	+ "group": "bb2e35e7a931c198",
	374	+ "order": 0,
	375	+ "width": 0,
	376	+ "height": 0,
	377	+ "label": "Hum_SHT",
	378	+ "chartType": "line",
	379	+ "legend": "false",
	380	+ "xformat": "HH:mm:ss",
	381	+ "interpolate": "linear",
	382	+ "nodata": "",
	383	+ "dot": false,
	384	+ "ymin": "",
	385	+ "ymax": "",
	386	+ "removeOlder": 1,
	387	+ "removeOlderPoints": "",
	388	+ "removeOlderUnit": "3600",
	389	+ "cutout": 0,
	390	+ "useOneColor": false,
	391	+ "useUTC": false,
	392	+ "colors": [
	393	+ "#1f77b4",
	394	+ "#aec7e8",
	395	+ "#ff7f0e",
	396	+ "#2ca02c",
	397	+ "#98df8a",
	398	+ "#d62728",
	399	+ "#ff9896",
	400	+ "#9467bd",
	401	+ "#c5b0d5"
	402	+ ],
	403	+ "outputs": 1,
	404	+ "useDifferentColor": false,
	405	+ "className": "",
	406	+ "x": 950,
	407	+ "y": 440,
	408	+ "wires": [
	409	+ []
	410	+ ]
	411	+ },
	412	+ {
	413	+ "id": "a21581a41adc1714",
	414	+ "type": "ui_text",
	415	+ "z": "5e07f5eeeb2a969b",
	416	+ "group": "9109ae41eee353df",
	417	+ "order": 0,
	418	+ "width": "6",
	419	+ "height": "4",
	420	+ "name": "",
	421	+ "label": "Door_status",
	422	+ "format": "{{msg.payload}}",
	423	+ "layout": "col-center",
	424	+ "className": "",
	425	+ "x": 950,
	426	+ "y": 320,
	427	+ "wires": []
	428	+ },
	429	+ {
	430	+ "id": "416a930e89291528",
	431	+ "type": "debug",
	432	+ "z": "5e07f5eeeb2a969b",
	433	+ "name": "debug 2",
	434	+ "active": true,
	435	+ "tosidebar": true,
	436	+ "console": false,
	437	+ "tostatus": false,
	438	+ "complete": "false",
	439	+ "statusVal": "",
	440	+ "statusType": "auto",
	441	+ "x": 660,
	442	+ "y": 60,
	443	+ "wires": []
	444	+ },
	445	+ {
	446	+ "id": "3601a98894805fbe",
	447	+ "type": "debug",
	448	+ "z": "5e07f5eeeb2a969b",
	449	+ "name": "debug 3",
	450	+ "active": true,
	451	+ "tosidebar": true,
	452	+ "console": false,
	453	+ "tostatus": false,
	454	+ "complete": "false",
	455	+ "statusVal": "",
	456	+ "statusType": "auto",
	457	+ "x": 380,
	458	+ "y": 240,
	459	+ "wires": []
	460	+ },
	461	+ {
	462	+ "id": "bb1c0e81fd51fa9e",
	463	+ "type": "serial-port",
	464	+ "serialport": "/dev/ttyUSB0",
	465	+ "serialbaud": "9600",
	466	+ "databits": "8",
	467	+ "parity": "none",
	468	+ "stopbits": "1",
	469	+ "waitfor": "",
	470	+ "dtr": "none",
	471	+ "rts": "none",
	472	+ "cts": "none",
	473	+ "dsr": "none",
	474	+ "newline": "\\n",
	475	+ "bin": "false",
	476	+ "out": "char",
	477	+ "addchar": "\\r\\n",
	478	+ "responsetimeout": "10000"
	479	+ },
	480	+ {
	481	+ "id": "c1fddd37879528e5",
	482	+ "type": "ui_group",
	483	+ "name": "BatV",
	484	+ "tab": "abb98f80600a5448",
	485	+ "order": 1,
	486	+ "disp": true,
	487	+ "width": "6",
	488	+ "collapse": false,
	489	+ "className": ""
	490	+ },
	491	+ {
	492	+ "id": "6d46fdae9f413f7b",
	493	+ "type": "ui_group",
	494	+ "name": "ADC_CH0V",
	495	+ "tab": "abb98f80600a5448",
	496	+ "order": 1,
	497	+ "disp": true,
	498	+ "width": "6",
	499	+ "collapse": false,
	500	+ "className": ""
	501	+ },
	502	+ {
	503	+ "id": "bb5657c2a8c290a3",
	504	+ "type": "ui_group",
	505	+ "name": "BatV",
	506	+ "tab": "abb98f80600a5448",
	507	+ "order": 3,
	508	+ "disp": true,
	509	+ "width": "6",
	510	+ "collapse": false,
	511	+ "className": ""
	512	+ },
	513	+ {
	514	+ "id": "528e965cef294158",
	515	+ "type": "ui_group",
	516	+ "name": "Digital_IStatus",
	517	+ "tab": "abb98f80600a5448",
	518	+ "order": 4,
	519	+ "disp": true,
	520	+ "width": "6",
	521	+ "collapse": false,
	522	+ "className": ""
	523	+ },
	524	+ {
	525	+ "id": "5e615e3edb5999a0",
	526	+ "type": "ui_group",
	527	+ "name": "EXTI_Trigger",
	528	+ "tab": "abb98f80600a5448",
	529	+ "order": 5,
	530	+ "disp": true,
	531	+ "width": "6",
	532	+ "collapse": false,
	533	+ "className": ""
	534	+ },
	535	+ {
	536	+ "id": "5f7fec85295a7f7c",
	537	+ "type": "ui_group",
	538	+ "name": "TempC_SHT",
	539	+ "tab": "abb98f80600a5448",
	540	+ "order": 6,
	541	+ "disp": true,
	542	+ "width": "6",
	543	+ "collapse": false,
	544	+ "className": ""
	545	+ },
	546	+ {
	547	+ "id": "3cb616f18674c42a",
	548	+ "type": "ui_group",
	549	+ "name": "Work_mode",
	550	+ "tab": "abb98f80600a5448",
	551	+ "order": 7,
	552	+ "disp": true,
	553	+ "width": "6",
	554	+ "collapse": false,
	555	+ "className": ""
	556	+ },
	557	+ {
	558	+ "id": "bb2e35e7a931c198",
	559	+ "type": "ui_group",
	560	+ "name": "Hum_SHT",
	561	+ "tab": "abb98f80600a5448",
	562	+ "order": 8,
	563	+ "disp": true,
	564	+ "width": "6",
	565	+ "collapse": false,
	566	+ "className": ""
	567	+ },
	568	+ {
	569	+ "id": "9109ae41eee353df",
	570	+ "type": "ui_group",
	571	+ "name": "Door_status",
	572	+ "tab": "abb98f80600a5448",
	573	+ "order": 9,
	574	+ "disp": true,
	575	+ "width": "6",
	576	+ "collapse": false,
	577	+ "className": ""
	578	+ },
	579	+ {
	580	+ "id": "abb98f80600a5448",
	581	+ "type": "ui_tab",
	582	+ "name": "LSN50v2 S31",
	583	+ "icon": "LSN50v2 S31",
	584	+ "disabled": false,
	585	+ "hidden": false
	586	+ }
	587	+]

Log-Temperature-Sensor-and-send-data-to-Node-red.json

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+10.3 KB

Content

...	...	@@ -1,0 +1,443 @@
	1	+[
	2	+ {
	3	+ "id": "0a211e08511c4bdd",
	4	+ "type": "tab",
	5	+ "label": "serial USB",
	6	+ "disabled": false,
	7	+ "info": "",
	8	+ "env": []
	9	+ },
	10	+ {
	11	+ "id": "4a97eeb54bf57a6d",
	12	+ "type": "serial in",
	13	+ "z": "0a211e08511c4bdd",
	14	+ "name": "",
	15	+ "serial": "bb1c0e81fd51fa9e",
	16	+ "x": 210,
	17	+ "y": 60,
	18	+ "wires": [
	19	+ [
	20	+ "d2493fb9752dbcab",
	21	+ "d183c255973c979e"
	22	+ ]
	23	+ ]
	24	+ },
	25	+ {
	26	+ "id": "12f1eeb8049675c1",
	27	+ "type": "inject",
	28	+ "z": "0a211e08511c4bdd",
	29	+ "name": "AT+SEND=1,hello world,0,3",
	30	+ "props": [
	31	+ {
	32	+ "p": "payload"
	33	+ }
	34	+ ],
	35	+ "repeat": "",
	36	+ "crontab": "",
	37	+ "once": false,
	38	+ "onceDelay": 0.1,
	39	+ "topic": "",
	40	+ "payload": "AT+SEND=1,hello world,0,3",
	41	+ "payloadType": "str",
	42	+ "x": 220,
	43	+ "y": 260,
	44	+ "wires": [
	45	+ [
	46	+ "a5d2f5df63a2148e"
	47	+ ]
	48	+ ]
	49	+ },
	50	+ {
	51	+ "id": "a5d2f5df63a2148e",
	52	+ "type": "serial out",
	53	+ "z": "0a211e08511c4bdd",
	54	+ "name": "",
	55	+ "serial": "bb1c0e81fd51fa9e",
	56	+ "x": 540,
	57	+ "y": 260,
	58	+ "wires": []
	59	+ },
	60	+ {
	61	+ "id": "dc04c04a0bc0e5db",
	62	+ "type": "inject",
	63	+ "z": "0a211e08511c4bdd",
	64	+ "name": "",
	65	+ "props": [
	66	+ {
	67	+ "p": "payload"
	68	+ }
	69	+ ],
	70	+ "repeat": "",
	71	+ "crontab": "",
	72	+ "once": false,
	73	+ "onceDelay": 0.1,
	74	+ "topic": "",
	75	+ "payload": "ATZ",
	76	+ "payloadType": "str",
	77	+ "x": 290,
	78	+ "y": 320,
	79	+ "wires": [
	80	+ [
	81	+ "a5d2f5df63a2148e"
	82	+ ]
	83	+ ]
	84	+ },
	85	+ {
	86	+ "id": "3de96a220e28e8f0",
	87	+ "type": "inject",
	88	+ "z": "0a211e08511c4bdd",
	89	+ "name": "AT+FRE",
	90	+ "props": [
	91	+ {
	92	+ "p": "payload"
	93	+ }
	94	+ ],
	95	+ "repeat": "",
	96	+ "crontab": "",
	97	+ "once": false,
	98	+ "onceDelay": 0.1,
	99	+ "topic": "",
	100	+ "payload": "AT+FRE=868.100,868.100",
	101	+ "payloadType": "str",
	102	+ "x": 280,
	103	+ "y": 380,
	104	+ "wires": [
	105	+ [
	106	+ "a5d2f5df63a2148e"
	107	+ ]
	108	+ ]
	109	+ },
	110	+ {
	111	+ "id": "638725a47a1e4365",
	112	+ "type": "inject",
	113	+ "z": "0a211e08511c4bdd",
	114	+ "name": "AT+BW",
	115	+ "props": [
	116	+ {
	117	+ "p": "payload"
	118	+ }
	119	+ ],
	120	+ "repeat": "",
	121	+ "crontab": "",
	122	+ "once": false,
	123	+ "onceDelay": 0.1,
	124	+ "topic": "",
	125	+ "payload": "AT+BW=0,0",
	126	+ "payloadType": "str",
	127	+ "x": 290,
	128	+ "y": 440,
	129	+ "wires": [
	130	+ [
	131	+ "a5d2f5df63a2148e"
	132	+ ]
	133	+ ]
	134	+ },
	135	+ {
	136	+ "id": "85ba9868d1f3e82c",
	137	+ "type": "inject",
	138	+ "z": "0a211e08511c4bdd",
	139	+ "name": "AT+SF",
	140	+ "props": [
	141	+ {
	142	+ "p": "payload"
	143	+ }
	144	+ ],
	145	+ "repeat": "",
	146	+ "crontab": "",
	147	+ "once": false,
	148	+ "onceDelay": 0.1,
	149	+ "topic": "",
	150	+ "payload": "AT+SF=12,12",
	151	+ "payloadType": "str",
	152	+ "x": 290,
	153	+ "y": 500,
	154	+ "wires": [
	155	+ [
	156	+ "a5d2f5df63a2148e"
	157	+ ]
	158	+ ]
	159	+ },
	160	+ {
	161	+ "id": "144b2749013ffe57",
	162	+ "type": "inject",
	163	+ "z": "0a211e08511c4bdd",
	164	+ "name": "AT+RXMOD",
	165	+ "props": [
	166	+ {
	167	+ "p": "payload"
	168	+ }
	169	+ ],
	170	+ "repeat": "",
	171	+ "crontab": "",
	172	+ "once": false,
	173	+ "onceDelay": 0.1,
	174	+ "topic": "",
	175	+ "payload": "AT+RXMOD=65535,2",
	176	+ "payloadType": "str",
	177	+ "x": 270,
	178	+ "y": 560,
	179	+ "wires": [
	180	+ [
	181	+ "a5d2f5df63a2148e"
	182	+ ]
	183	+ ]
	184	+ },
	185	+ {
	186	+ "id": "bfb2e9df89dc5e2f",
	187	+ "type": "inject",
	188	+ "z": "0a211e08511c4bdd",
	189	+ "name": "AT+SYNCWORD",
	190	+ "props": [
	191	+ {
	192	+ "p": "payload"
	193	+ }
	194	+ ],
	195	+ "repeat": "",
	196	+ "crontab": "",
	197	+ "once": false,
	198	+ "onceDelay": 0.1,
	199	+ "topic": "",
	200	+ "payload": "AT+SYNCWORD=0",
	201	+ "payloadType": "str",
	202	+ "x": 260,
	203	+ "y": 620,
	204	+ "wires": [
	205	+ [
	206	+ "a5d2f5df63a2148e"
	207	+ ]
	208	+ ]
	209	+ },
	210	+ {
	211	+ "id": "d2493fb9752dbcab",
	212	+ "type": "function",
	213	+ "z": "0a211e08511c4bdd",
	214	+ "name": "function 1",
	215	+ "func": "var data = msg.payload\nif (data.substring(0, 4) == \"Data\") {\n if (data.substring(6, 12) == \"(HEX:)\") {\n var temp = data.substring(13, 15) + data.substring(16, 18)\n var hum = data.substring(19, 21) + data.substring(22, 24)\n var temp1 = parseInt(temp, 16) / 100\n var hum1 = parseInt(hum, 16) / 10\n var a1 = { payload: temp1 }, a2 = { payload: hum1 }\n }\n if (data.substring(6, 15) == \"(String:)\") {\n var temp = data.substring(20, 24)\n var hum = data.substring(29, 34)\n a1 = { payload: temp }, a2 = { payload: hum }\n }\n}\nif (data.substring(0, 4) == \"Rssi\") {\n var rssi = data.substring(6)\n var a3 = { payload: rssi }\n}\nreturn [a1, a2, a3];",
	216	+ "outputs": 3,
	217	+ "noerr": 0,
	218	+ "initialize": "",
	219	+ "finalize": "",
	220	+ "libs": [],
	221	+ "x": 420,
	222	+ "y": 60,
	223	+ "wires": [
	224	+ [
	225	+ "c17d94be4317ae6c"
	226	+ ],
	227	+ [
	228	+ "20c5b1c7f42fa6bb"
	229	+ ],
	230	+ [
	231	+ "39a8462f3d748eef"
	232	+ ]
	233	+ ]
	234	+ },
	235	+ {
	236	+ "id": "39a8462f3d748eef",
	237	+ "type": "ui_chart",
	238	+ "z": "0a211e08511c4bdd",
	239	+ "name": "",
	240	+ "group": "ef41b39771110fa5",
	241	+ "order": 1,
	242	+ "width": 0,
	243	+ "height": 0,
	244	+ "label": "RSSI",
	245	+ "chartType": "line",
	246	+ "legend": "false",
	247	+ "xformat": "dd HH:mm",
	248	+ "interpolate": "linear",
	249	+ "nodata": "",
	250	+ "dot": true,
	251	+ "ymin": "",
	252	+ "ymax": "",
	253	+ "removeOlder": 1,
	254	+ "removeOlderPoints": "",
	255	+ "removeOlderUnit": "3600",
	256	+ "cutout": 0,
	257	+ "useOneColor": false,
	258	+ "useUTC": false,
	259	+ "colors": [
	260	+ "#1f77b4",
	261	+ "#aec7e8",
	262	+ "#ff7f0e",
	263	+ "#2ca02c",
	264	+ "#98df8a",
	265	+ "#d62728",
	266	+ "#ff9896",
	267	+ "#9467bd",
	268	+ "#c5b0d5"
	269	+ ],
	270	+ "outputs": 1,
	271	+ "useDifferentColor": false,
	272	+ "className": "",
	273	+ "x": 670,
	274	+ "y": 180,
	275	+ "wires": [
	276	+ []
	277	+ ]
	278	+ },
	279	+ {
	280	+ "id": "c17d94be4317ae6c",
	281	+ "type": "ui_chart",
	282	+ "z": "0a211e08511c4bdd",
	283	+ "name": "",
	284	+ "group": "7e1d1c102cf74e6b",
	285	+ "order": 1,
	286	+ "width": 0,
	287	+ "height": 0,
	288	+ "label": "Temperature",
	289	+ "chartType": "line",
	290	+ "legend": "false",
	291	+ "xformat": "HH:mm:ss",
	292	+ "interpolate": "linear",
	293	+ "nodata": "",
	294	+ "dot": true,
	295	+ "ymin": "",
	296	+ "ymax": "",
	297	+ "removeOlder": 1,
	298	+ "removeOlderPoints": "",
	299	+ "removeOlderUnit": "3600",
	300	+ "cutout": 0,
	301	+ "useOneColor": false,
	302	+ "useUTC": false,
	303	+ "colors": [
	304	+ "#1f77b4",
	305	+ "#aec7e8",
	306	+ "#ff7f0e",
	307	+ "#2ca02c",
	308	+ "#98df8a",
	309	+ "#d62728",
	310	+ "#ff9896",
	311	+ "#9467bd",
	312	+ "#c5b0d5"
	313	+ ],
	314	+ "outputs": 1,
	315	+ "useDifferentColor": false,
	316	+ "className": "",
	317	+ "x": 690,
	318	+ "y": 100,
	319	+ "wires": [
	320	+ []
	321	+ ]
	322	+ },
	323	+ {
	324	+ "id": "20c5b1c7f42fa6bb",
	325	+ "type": "ui_chart",
	326	+ "z": "0a211e08511c4bdd",
	327	+ "name": "",
	328	+ "group": "3f5d139f158d7c1c",
	329	+ "order": 2,
	330	+ "width": 0,
	331	+ "height": 0,
	332	+ "label": "Humidity",
	333	+ "chartType": "line",
	334	+ "legend": "false",
	335	+ "xformat": "HH:mm:ss",
	336	+ "interpolate": "linear",
	337	+ "nodata": "",
	338	+ "dot": true,
	339	+ "ymin": "",
	340	+ "ymax": "",
	341	+ "removeOlder": 1,
	342	+ "removeOlderPoints": "",
	343	+ "removeOlderUnit": "3600",
	344	+ "cutout": 0,
	345	+ "useOneColor": false,
	346	+ "useUTC": false,
	347	+ "colors": [
	348	+ "#1f77b4",
	349	+ "#aec7e8",
	350	+ "#ff7f0e",
	351	+ "#2ca02c",
	352	+ "#98df8a",
	353	+ "#d62728",
	354	+ "#ff9896",
	355	+ "#9467bd",
	356	+ "#c5b0d5"
	357	+ ],
	358	+ "outputs": 1,
	359	+ "useDifferentColor": false,
	360	+ "className": "",
	361	+ "x": 680,
	362	+ "y": 140,
	363	+ "wires": [
	364	+ []
	365	+ ]
	366	+ },
	367	+ {
	368	+ "id": "d183c255973c979e",
	369	+ "type": "debug",
	370	+ "z": "0a211e08511c4bdd",
	371	+ "name": "debug 1",
	372	+ "active": true,
	373	+ "tosidebar": true,
	374	+ "console": false,
	375	+ "tostatus": false,
	376	+ "complete": "false",
	377	+ "statusVal": "",
	378	+ "statusType": "auto",
	379	+ "x": 420,
	380	+ "y": 180,
	381	+ "wires": []
	382	+ },
	383	+ {
	384	+ "id": "bb1c0e81fd51fa9e",
	385	+ "type": "serial-port",
	386	+ "serialport": "/dev/ttyUSB0",
	387	+ "serialbaud": "9600",
	388	+ "databits": "8",
	389	+ "parity": "none",
	390	+ "stopbits": "1",
	391	+ "waitfor": "",
	392	+ "dtr": "none",
	393	+ "rts": "none",
	394	+ "cts": "none",
	395	+ "dsr": "none",
	396	+ "newline": "\\n",
	397	+ "bin": "false",
	398	+ "out": "char",
	399	+ "addchar": "\\r\\n",
	400	+ "responsetimeout": "10000"
	401	+ },
	402	+ {
	403	+ "id": "ef41b39771110fa5",
	404	+ "type": "ui_group",
	405	+ "name": "rssi",
	406	+ "tab": "abb98f80600a5448",
	407	+ "order": 3,
	408	+ "disp": true,
	409	+ "width": "6",
	410	+ "collapse": false,
	411	+ "className": ""
	412	+ },
	413	+ {
	414	+ "id": "7e1d1c102cf74e6b",
	415	+ "type": "ui_group",
	416	+ "name": "TEM",
	417	+ "tab": "abb98f80600a5448",
	418	+ "order": 4,
	419	+ "disp": true,
	420	+ "width": "6",
	421	+ "collapse": false,
	422	+ "className": ""
	423	+ },
	424	+ {
	425	+ "id": "3f5d139f158d7c1c",
	426	+ "type": "ui_group",
	427	+ "name": "HUM",
	428	+ "tab": "abb98f80600a5448",
	429	+ "order": 2,
	430	+ "disp": true,
	431	+ "width": "6",
	432	+ "collapse": false,
	433	+ "className": ""
	434	+ },
	435	+ {
	436	+ "id": "abb98f80600a5448",
	437	+ "type": "ui_tab",
	438	+ "name": "LG01v2",
	439	+ "icon": "LG01v2",
	440	+ "disabled": false,
	441	+ "hidden": false
	442	+ }
	443	+]

image-20230504095457-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+412.6 KB

Content

image-20230504095502-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+412.6 KB

Content

image-20230504100722-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+21.5 KB

Content

image-20230506110646-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+383.1 KB

Content

image-20230506113332-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+28.6 KB

Content

image-20230506113432-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+36.5 KB

Content

image-20230506113531-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+403.2 KB

Content

image-20230506113602-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+26.7 KB

Content

image-20230506113623-6.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+35.4 KB

Content

image-20230506113705-7.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+40.9 KB

Content

image-20230506113722-8.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+33.2 KB

Content

image-20230506113737-9.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+25.2 KB

Content

image-20230506113813-10.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+39.5 KB

Content

image-20230506113831-11.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+32.2 KB

Content

image-20230506114127-12.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+56.1 KB

Content

image-20230506115438-13.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+413.6 KB

Content

image-20230620103153-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+127.6 KB

Content

image-20230620103535-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+156.3 KB

Content

image-20230620103923-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Kilight

Size

...	...	@@ -1,0 +1,1 @@
	1	+72.7 KB

Content