Last modified by Kilight Cao on 2024/03/04 09:10
<
From version < 101.1 >
edited by Edwin Chen
on 2022/11/14 19:39
To version < 103.1 >
edited by Edwin Chen
on 2022/11/29 14:07
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -11,23 +11,30 @@
11 11  
12 12  {{toc/}}
13 13  
14 -= **1. Introduction** =
15 15  
16 16  
17 -== **1.1 What is LG01-V2** ==
18 18  
19 19  
18 +
19 += **1. Introduction** =
20 +
21 +== **1.1 What is LG01v2** ==
22 +
23 +
20 20  (((
21 21  (((
22 -The LG01-V2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LG01v2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 +
28 +LG01v2 is specially design for peer to peer LoRa protocol instead of LoRaWAN protocol. The LG01v2 use single channel LoRa module to minimize the deployment cost for a private p2p LoRa wireless network.
23 23  )))
24 24  
25 25  (((
26 -LG01-V2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
32 +LG01v2 uses Open Source Linux system. User can modify the Linux part and develop customize software base on it. It has (% style="color:green" %)1.2Ghz Quad-Core CPU(%%) , (% style="color:green" %)4GB eMMC storage(%%) and (% style="color:green" %)512MB RAM(%%) for most application.
33 +
34 +LG01v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
27 27  )))
28 28  
29 29  
30 -
31 31  == **1.2 Specifications** ==
32 32  
33 33  
... ... @@ -48,6 +48,7 @@
48 48  * Storage Temperature: -20 ~~ 65°C
49 49  * Power Input: 5V, 2A, DC
50 50  
58 +
51 51  == **1.3 Features** ==
52 52  
53 53  
... ... @@ -56,9 +56,9 @@
56 56  * Remote Management
57 57  * Auto-provisioning for batch deployment and management
58 58  * LoRa Gateway
59 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
60 60  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
61 61  
69 +
62 62  == **1.4 Block Diagram** ==
63 63  
64 64  
... ... @@ -84,7 +84,6 @@
84 84  (% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
85 85  
86 86  
87 -
88 88  == **1.6 Button Intruction** ==
89 89  
90 90  
... ... @@ -101,7 +101,6 @@
101 101   //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
102 102  
103 103  
104 -
105 105  = **2. Quick Start** =
106 106  
107 107  
... ... @@ -112,7 +112,6 @@
112 112  
113 113  == **2.1 Connects to the network and accesses the gateway Web UI** ==
114 114  
115 -
116 116  == **2.1.1 connect the network.** ==
117 117  
118 118  
... ... @@ -145,11 +145,11 @@
145 145  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102847-7.png?rev=1.1||alt="image-20220622102847-7.png"]]
146 146  
147 147  
148 -
149 149  = **3. Web Configure Pages** =
150 150  
151 151  == **3.1 Home** ==
152 152  
157 +
153 153  //Shows the system running status~://
154 154  
155 155  [[image:image-20221104155612-1.png||height="497" width="942"]]
... ... @@ -157,7 +157,6 @@
157 157  
158 158  == **3.2 Network Settings** ==
159 159  
160 -
161 161  === **3.2.1 Network ~-~-> WiFi** ===
162 162  
163 163  
... ... @@ -164,7 +164,6 @@
164 164  [[image:image-20221104155654-2.png||height="319" width="813"]]
165 165  
166 166  
167 -
168 168  === **3.4.2 Network ~-~-> System Status** ===
169 169  
170 170  
... ... @@ -171,7 +171,6 @@
171 171  [[image:image-20221104155724-3.png||height="679" width="861"]]
172 172  
173 173  
174 -
175 175  === **3.4.3 Network ~-~-> Firewall** ===
176 176  
177 177  
... ... @@ -178,10 +178,8 @@
178 178  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616115351-6.png?width=661&height=244&rev=1.1||alt="image-20220616115351-6.png"]]
179 179  
180 180  
181 -
182 182  == **3.5 System** ==
183 183  
184 -
185 185  === **3.5.1  System ~-~-> System Overview** ===
186 186  
187 187  
... ... @@ -190,7 +190,6 @@
190 190  [[image:image-20221104155907-4.png]]
191 191  
192 192  
193 -
194 194  === **3.5.2 System ~-~-> Backup/Restore** ===
195 195  
196 196  
... ... @@ -211,15 +211,13 @@
211 211   **Path**: System ~-~-> Built-in Server
212 212  
213 213  
214 -**Troubleshooting:**
213 +(% style="color:blue" %)**Troubleshooting：**
215 215  
216 -
217 217  **~ 1. URL does not jump properly**
218 218  
219 219   For the Node-Red, you can use the local IP address and the port is 1880 to access it.
220 220  
221 221  
222 -
223 223  == **4.1 Application Server ~-~- Node-Red** ==
224 224  
225 225  
... ... @@ -234,10 +234,9 @@
234 234  
235 235  = **5. How to configure the Lora Gateway** =
236 236  
234 +== **5.1 Configure and Debug LoRa wireless of LG01v2** ==
237 237  
238 -== **5.1 Access the Lora configuration page** ==
239 239  
240 -
241 241  Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**:
242 242  
243 243  (% class="box infomessage" %)
... ... @@ -258,7 +258,9 @@
258 258  )))
259 259  
260 260  
261 -(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**(%%)
257 +(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**
258 +
259 +
262 262  (% style="color:red" %)[[image:image-20221029174703-3.png]]
263 263  
264 264  
... ... @@ -267,19 +267,19 @@
267 267  
268 268  (% class="box infomessage" %)
269 269  (((
270 -AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
271 -AT+GROUPMOD=0,0  ~-~--> TX and RX group
272 -AT+BW=0,0  ~-~--> TX and RX Bandwidth
273 -AT+SF=12,12  ~-~--> TX and RX Spreading Factor
274 -AT+POWER=14  ~-~--> TX Power Range
275 -AT+CRC=1,1  ~-~--> TX and RX CRC Type
276 -AT+HEADER=0,0  ~-~--> TX and RX Header Type
277 -AT+CR=1,1  ~-~--> TX and RX Coding Rate
278 -AT+IQ=0,0  ~-~--> TX and RX InvertIQ
279 -AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length
280 -AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
281 -AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
282 -AT+RXDAFORM=1                              
268 +**AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
269 +AT+GROUPMOD=0,0  ~-~-->  TX and RX group
270 +AT+BW=0,0  ~-~-->  TX and RX Bandwidth
271 +AT+SF=12,12  ~-~-->  TX and RX Spreading Factor
272 +AT+POWER=14  ~-~-->  TX Power Range
273 +AT+CRC=1,1  ~-~-->  TX and RX CRC Type
274 +AT+HEADER=0,0  ~-~-->  TX and RX Header Type
275 +AT+CR=1,1  ~-~-->  TX and RX Coding Rate
276 +AT+IQ=0,0  ~-~-->  TX and RX InvertIQ
277 +AT+PREAMBLE=8,8  ~-~-->  TX and RX Preamble Length
278 +AT+SYNCWORD=0  ~-~-->  Syncword(0: private，1: public)
279 +AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
280 +AT+RXDAFORM=1**                              
283 283  )))
284 284  
285 285  
... ... @@ -287,6 +287,7 @@
287 287  
288 288  === **5.2.1 Introduce for the example:** ===
289 289  
288 +
290 290  [[image:image-20221104102736-3.png||height="282" width="723"]]
291 291  
292 292  
... ... @@ -296,11 +296,12 @@
296 296  * **LG01v2** : LG01v2 is set to listening the LoRa Channel which LA66 is broadcasting. When LG01v2 get the data from LA66, LG01v2 will plot the data in built-in IoT server.
297 297  
298 298  
299 -=== 5.2.2 Set Up LA66 Shield + UNO ===
298 +=== **5.2.2 Set Up LA66 Shield + UNO** ===
300 300  
301 301  
302 302  ==== **Set up LA66 Module** ====
303 303  
303 +
304 304  LA66 Module is loaded with the firmware **[[LA66 Peer-to-Peer firmware>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]] **and user can use AT Command to set up LA66 with below parameters:
305 305  
306 306  (((
... ... @@ -325,10 +325,13 @@
325 325  )))
326 326  
327 327  
328 +
328 328  ==== **Set up Arduino UNO** ====
329 329  
330 -(% id="cke_bm_1033249S" style="display:none" %)** **(%%)**Hardware Connection**
331 +(% id="cke_bm_1033249S" style="display:none" %)** **
331 331  
333 +**Hardware Connection**
334 +
332 332  (% class="box infomessage" %)
333 333  (((
334 334  **The DHT11 sensor connects to the LA66 Shield:**
... ... @@ -341,13 +341,17 @@
341 341  [[image:image-20221108170731-5.png||height="588" width="441"]]
342 342  
343 343  
347 +
344 344  ===== **1. Open Arduino IDE** =====
345 345  
350 +
346 346  [[image:image-20221108172149-6.png||height="650" width="542"]]
347 347  
348 348  
354 +
349 349  ===== **2. Open project** =====
350 350  
357 +
351 351  Users can download Arduino files from this link: [[attach:Log-Temperature-Sensor-and-send-data-to-Node-red.ino||target="_blank"]]
352 352  
353 353  Then click Compile and Upload to LA66 Shield,
... ... @@ -355,22 +355,24 @@
355 355  [[image:image-20221108172432-7.png]]
356 356  
357 357  
365 +
358 358  ===== **3. Open the Serial Monitor to check the LA66 Shield data** =====
359 359  
368 +
360 360  The UNO will now reads the temperature and humidity data from the sensor and broadcast it via LoRa wireless,
361 361  
362 362  [[image:image-20221108174840-8.png||height="731" width="671"]]
363 363  
364 364  
374 +
365 365  Sending out data as below.
366 366  
367 367  [[image:image-20221108175113-9.png||height="556" width="998"]]
368 368  
369 369  
380 +=== **5.2.3 Set Up LG01v2** ===
370 370  
371 -=== 5.2.3 Set Up LG01v2 ===
372 372  
373 -
374 374  Configure LG01v2 LoRa channel parameters so it can get data from LA66 Shield
375 375  
376 376  (% style="color:red; font-weight:bold" %)**LG01v**(% style="color:red" %)**2 as Receiver: (configured as AT+RXMOD=65535,2)**
... ... @@ -393,8 +393,9 @@
393 393  )))
394 394  
395 395  
396 -=== 5.2.4 Test result ===
405 +=== **5.2.4 Test result** ===
397 397  
407 +
398 398  After the above configuration is complete, users can send test simulation data to check whether the configuration is correct, In LA66 sheild serial console send:(% style="color:red" %)**(AT+SEND=1,hello world,2,3).**
399 399  )))
400 400  
... ... @@ -403,6 +403,7 @@
403 403  [[image:image-20221108164413-2.png]]
404 404  
405 405  
416 +
406 406  In the real-time log of LG01v2：
407 407  
408 408  [[image:image-20221108170314-3.png]]
... ... @@ -454,12 +454,12 @@
454 454  
455 455  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
456 456  
468 +
457 457  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
458 458  
459 459  
460 460  = **7. FAQ** =
461 461  
462 -
463 463  == **7.1 How does LG01-V2 communicate with Lora shield (LoRa.h)** ==
464 464  
465 465  
... ... @@ -488,6 +488,8 @@
488 488  AT+RXDAFORM=1    
489 489  )))
490 490  
502 +
503 +
491 491  **Lora shield configuration:**
492 492  
493 493  Lora Shield example: [[attach:LoRa_Shield_Sketch_For_MQTT.ino||target="_blank"]] , [[attach:arduino-LoRa-master.zip||target="_blank"]]
... ... @@ -495,11 +495,13 @@
495 495  [[image:image-20221101161318-2.png]]
496 496  
497 497  
511 +
498 498  **Test LG01-V2 to receive Lora Shield data:**
499 499  
500 500  [[image:image-20221101161951-3.png]]
501 501  
502 502  
517 +
503 503  **Test the LG01-V2 to send data:**
504 504  
505 505  [[image:image-20221101162527-4.png]]
... ... @@ -514,6 +514,7 @@
514 514  
515 515  (% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
516 516  
532 +
517 517  **LG01-V2 configuration:**
518 518  
519 519  (% class="box infomessage" %)
... ... @@ -532,6 +532,7 @@
532 532  AT+RXDAFORM=1  ~-~--> RX data format**（0: Hex ,1: String）**
533 533  )))
534 534  
551 +
535 535  After we upload the sketch to Heltec LoRa Node, we can see below output from Arduino.
536 536  
537 537  Lora Shield example: [[attach:LoRa_send_trial.ino||target="_blank"]]
... ... @@ -543,6 +543,7 @@
543 543  
544 544  [[image:image-20221112163119-4.png||height="808" width="560"]]
545 545  
563 +
546 546  = (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
547 547  
548 548  
... ... @@ -554,7 +554,6 @@
554 554  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
555 555  
556 556  
557 -
558 558  = **9. Reference** =
559 559  
560 560  
... ... @@ -588,7 +588,6 @@
588 588  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
589 589  
590 590  
591 -
592 592  = **10. Manufacturer Info** =
593 593  
594 594  
... ... @@ -599,7 +599,6 @@
599 599  LongCheng Street, LongGang District ; Shenzhen 518116,China
600 600  
601 601  
602 -
603 603  = **11. FCC Warning** =
604 604  
605 605  
... ... @@ -632,7 +632,6 @@
632 632  (((
633 633  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
634 634  
650 +
635 635  
636 636  )))
637 -
638 -~)~)~)

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0