Skip to Content
Last modified by Xiaoling on 2024/10/21 15:44
From version 73.4
edited by Xiaoling
on 2022/05/07 14:47
Change comment: There is no comment for this version
To version 25.1
edited by Xiaoling
on 2022/05/06 16:58
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -20,109 +20,99 @@
20 20  ===== 1.1 What is HP0D =====
21 21  
22 22  (((
23 + The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, optional 3G or 4G.
24 +)))
25 +
23 23  (((
27 + The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
28 +)))
29 +
24 24  (((
25 -The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
31 +
26 26  )))
33 +
34 +(((
35 + HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in ATECC608 encryption chip.
27 27  )))
37 +
38 +(((
39 + It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is
28 28  )))
29 29  
30 30  (((
43 + fully compatible with LoRaWAN protocol. HP0D supports two LoRaWAN servers  at the same time, **users can use HP0D for helium mining**
44 +)))
45 +
31 31  (((
47 +**~ and connects max 2 x LoRaWAN servers at the same time**.
48 +)))
49 +
32 32  (((
33 -HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.
51 +
34 34  )))
53 +
54 +(((
55 +**~ Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use for Helium, user only needs to
35 35  )))
57 +
58 +(((
59 + input HNT wallet address and use QR  Code to onboarding HP0D when it arrives.
36 36  )))
37 37  
38 38  (((
39 -(((
40 -(((
41 -HP0D supports two LoRaWAN servers  at the same time, **users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
63 +
42 42  )))
43 -)))
44 -)))
45 45  
46 46  (((
47 -(((
48 -(((
49 -**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
67 + HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to
50 50  )))
51 -)))
52 -)))
53 53  
54 54  (((
55 -(((
56 -(((
57 -HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
71 + use in their own LoRaWAN network.
58 58  )))
59 -)))
60 -)))
61 61  
62 62  
63 63  ===== 1.2 Specifications =====
64 64  
65 65  (((
66 -(((
67 67  **~ Hardware System:**
68 68  )))
69 -)))
70 70  
71 71  (((
72 -(((
73 73   Linux Part:
74 74  )))
75 -)))
76 76  
77 77  * (((
78 -(((
79 79  Raspberry Pi 4
80 80  )))
81 -)))
82 82  
83 83  (((
84 -(((
85 85  **~ Interface:**
86 86  )))
87 -)))
88 88  
89 89  * (((
90 -(((
91 91  10M/100M RJ45 Ports x 1
92 92  )))
93 -)))
94 94  * (((
95 -(((
96 96  LoRaWAN Wireless
97 97  )))
98 -)))
99 99  * (((
100 -(((
101 101  Power Input: 12V 2A, DC
102 102  )))
103 -)))
104 104  
105 105  (((
106 -(((
107 107  **~ Operating Condition:**
108 108  )))
109 -)))
110 110  
111 111  * (((
112 -(((
113 113  Work Temperature: -20 ~~ 65°C
114 114  )))
115 -)))
116 116  * (((
117 -(((
118 118  Storage Temperature: -20 ~~ 65°C
119 119  )))
120 -)))
121 121  * (((
122 -(((
123 123  Power Input: 12V 2A, DC
124 124  )))
125 -)))
126 126  
127 127  ===== 1.3 Features =====
128 128  
... ... @@ -144,64 +144,53 @@
144 144  ===== 1.4 Label info and login name =====
145 145  
146 146  
147 -[[image:1651803959860-394.png||height="500" width="375"]]
137 +(% style="text-align:center" %)
138 +[[image:1651803959860-394.png||height="653" width="490"]]
148 148  
140 +
141 +
149 149  (((
143 +**~ Label information:**
144 +)))
145 +
150 150  (((
151 -**Label information:**
147 +
152 152  )))
153 -)))
154 154  
155 155  (((
156 -(((
157 -**Device host name:**      (% class="mark" %)dragino-xxxxxx
151 +**~ Device host name:**      (% class="mark" %)dragino-xxxxxx
158 158  )))
159 -)))
160 160  
161 161  (((
162 -(((
163 -**Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
155 +**~ Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
164 164  )))
165 -)))
166 166  
167 167  (((
168 -(((
169 -**Miner animal name**: xxx-xxx-xxx
159 +**~ Miner animal name**: xxx-xxx-xxx
170 170  )))
171 -)))
172 172  
173 173  (((
174 -(((
175 -**Miner address**:          112xxxxxx
163 +**~ Miner address**:          112xxxxxx
176 176  )))
177 -)))
178 178  
179 179  (((
180 -(((
181 -**Eth MAC address**: A8: 40: 41: EF: FE: CD
167 +**~ Eth MAC address**: A8: 40: 41: EF: FE: CD
182 182  )))
183 -)))
184 184  
185 185  (((
186 -(((
187 -**Login**:  root/d59f2d5b ((% class="mark" %)the root is the Login account for the Web-UI and SSH.(%%))
171 +**~ Login**:  root/d59f2d5b ((% class="mark" %)the root is the Login account for the Web-UI and SSH.(%%))
188 188  )))
189 -)))
190 190  
191 191  (((
192 -(((
193 -**SN**:  device serial number.
175 +**~ SN**:  device serial number.
194 194  )))
195 -)))
196 196  
197 197  
198 198  ==== 2. Quick Start & Onboarding ====
199 199  
200 200  (((
201 -(((
202 -The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
182 + The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
203 203  )))
204 -)))
205 205  
206 206  (% class="wikigeneratedid" id="H-2" %)
207 207  (((
... ... @@ -212,375 +212,278 @@
212 212  
213 213  ====== 2.1.1 via HP0D’s Access Point. ======
214 214  
215 -(((
216 -(((
217 - At the first boot of HP0D, it will auto generate a Wi-Fi network
194 + At the first boot of HP0D, it will auto generate a Wi-Fi network[[image:1651804327535-321.png||height="325" style="float:right" width="199"]]
218 218  
219 -[[image:1651804327535-321.png||height="325" width="199"]]
220 -)))
221 -)))
222 222  
223 -(((
224 -(((
225 -
226 -)))
227 -)))
228 -
229 -(((
230 -(((
231 -(% class="box infomessage" %)
232 -(((
233 233   called           : **//HPD-dragino-xxxxxx//**
234 -)))
235 -)))
236 -)))
237 237  
238 -(((
239 -(((
240 -(% class="box infomessage" %)
241 -(((
242 242   with password:  **//dragino+dragino//**
243 -)))
244 -)))
245 -)))
246 246  
247 -(((
248 -(((
249 - You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
250 -)))
251 -)))
252 252  
253 -[[image:1651804397792-591.png||height="402" width="763"]]
254 254  
203 + You can use a PC to connect to this Wi-Fi network. The PC will
255 255  
205 + get an IP address 10.130.1.xxx and the HP0D has the default
256 256  
207 + IP 10.130.1.1
208 +
209 +
210 +
211 +(% style="text-align:center" %)
212 +[[image:1651804397792-591.png]]
213 +
214 +
215 +
257 257  ====== 2.1.2 Connect via HP0D hostname ======
258 258  
259 -(((
260 -Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
261 -)))
218 + Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your
262 262  
263 -Like: __**//http:~/~/dragino-4ba54a//**__
220 + PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D
264 264  
222 + Web-UI via HP0D’s hostname.
223 +
224 +
225 + Like: __**//http:~/~/dragino-4ba54a//**__
226 +
227 +
228 +(% style="text-align:center" %)
265 265  [[image:1651804629009-699.png]]
266 266  
267 267  
268 268  ====== 2.1.3 Connect via Ethernet Port ======
269 269  
270 -(((
271 -(((
272 -Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.
273 -)))
274 -)))
234 + Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP  address the router has assigned to the HP0D.
275 275  
276 -(((
277 -If you get the IP address form route, like~:// (% class="mark" %)**10.130.2.42**(%%),// you can use this IP address to connect the WEB UI or SSH access of HP0D.
278 -)))
279 279  
237 + If you get the IP address form route, like~:// (% class="mark" %)**10.130.2.42**(%%),// you can use this IP address to connect the WEB UI or SSH access of HP0D.
238 +
239 +(% style="text-align:center" %)
280 280  [[image:1651804782523-623.png]]
281 281  
282 282  
243 +
283 283  ===== 2.2 Generate QR Code =====
284 284  
285 -(((
286 -Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.
287 -)))
246 + Go to **Miner** ~-~-> **QR Generate**, input your Helium Wallet Address, and click Generate.
288 288  
289 -(((
290 -Note: After onboarding, this wallet will become owner of this hotspot.
291 -)))
248 + Note: After onboarding, this wallet will become owner of this hotspot.
292 292  
293 -[[image:image-20220506140312-1.png||height="435" width="438"]]
250 +(% style="text-align:center" %)
251 +[[image:image-20220506140312-1.png]]
294 294  
295 295  
254 +
296 296  ===== 2.3 Onboarding Hotspot =====
297 297  
298 -(((
299 -~1. Download the Helium Hotspot APP from the Apple or Google Play store.
300 -)))
257 + ~1. Download the Helium Hotspot APP from the Apple or Google Play store.
301 301  
302 -(((
303 -Note: the APP version need to be greater than 3.11.
259 + Note: the APP version need to be greater than 3.11.
304 304  
305 -
306 -)))
261 + 2. To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose the ‘DRAGINO Miner HP0D’
307 307  
308 -(((
309 -2. To add a hotspot, select “Hotspot”. On this tab, click the ‘+ Add Hotspot’ in the mid where choose the ‘DRAGINO Miner HP0D’
310 -)))
263 + [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
311 311  
312 - [[image:1651817186037-899.png||height="429" width="206"]] [[image:1651817194458-938.png||height="434" width="203"]]
265 + 3. Scan the QR Code you generated in the previous step.
313 313  
314 314  
315 -3. Scan the QR Code you generated in the previous step.
268 + 4. Onboarding your device
316 316  
317 -[[image:1651828211026-220.png||height="405" width="191"]]
270 +Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of mobile to onboarding server might have issue.
318 318  
272 + [[image:image-20220506141159-2.png||height="426" width="204"]] [[image:1651817529289-461.png||height="423" width="199"]]
319 319  
320 -4. Onboarding your device
321 321  
322 -Mobile APP will get info from onboarding server. If MAC address doesn’t appear, it means the network connection of mobile to onboarding server might have issue.  [[image:image-20220506141159-2.png||height="422" width="202"]] [[image:1651817529289-461.png||height="423" width="199"]] [[image:1651828250802-391.png||height="421" width="197"]] [[image:1651828262668-768.png||height="416" width="196"]](% style="display:none" %)
323 323  
324 324  
325 -5. Check onboarding status
326 326  
278 +
279 +1. Check onboarding status
280 +
327 327  You can check from mobile:
328 328  
329 - [[image:1651828391664-884.png||height="413" width="197"]] [[image:1651828401011-970.png||height="412" width="193"]](% style="display:none" %)
283 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image015.png]] [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image016.jpg]]
330 330  
331 331  You can also see the hotspot status in below link:
332 332  
333 -https:~/~/explorer.helium.com/hotspots/**//<(% class="mark" %)YOUR_HOTSPORT_KEY(%%)>//**
287 +https:~/~/explorer.helium.com/hotspots/**//<YOUR_HOTSPORT_KEY>//**
334 334  
335 335  Example:
336 336  
337 337  Green Synced means hotspot works normal.
338 338  
339 -[[image:1651828427715-679.png||height="374" width="635"]]
293 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image017.png]]
340 340  
341 341  
342 -===== 2.4 Set the Port Forwarding =====
343 343  
344 -(((
345 -Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.
346 -)))
347 347  
348 -[[image:1651828514449-658.png]]
349 349  
350 -(((
351 -
352 -)))
299 +1.
300 +11. Set the Port Forwarding
353 353  
354 -(((
302 +Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.
303 +
304 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.png]]
305 +
306 +
355 355  Note: Please refer to more detailed Settings
356 -)))
357 357  
358 -(((
359 359  [[https:~~/~~/docs.helium.com/troubleshooting/network-troubleshooting/>>url:https://docs.helium.com/troubleshooting/network-troubleshooting/]]
360 -)))
361 361  
362 -(((
363 363  [[https:~~/~~/www.youtube.com/watch?v=GKusVC7ovrE>>url:https://www.youtube.com/watch?v=GKusVC7ovrE]]
364 -)))
365 365  
366 366  
367 -==== 3. Check the configuration of HP0D ====
368 368  
369 -===== 3.1 LoRa frequency configuration =====
370 370  
371 -[[image:1651828687205-178.png||height="323" width="657"]]
372 372  
317 +1. Check the configuration of HP0D
318 +11. LoRa frequency configuration
373 373  
374 -===== 3.2 Check the LoRaWAN serveraddress =====
320 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image019.png]]
375 375  
376 -[[image:1651828703680-156.png||height="349" width="672"]]
322 +1.
323 +11. Check the LoRaWAN serveraddress.
377 377  
325 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]
378 378  
379 -===== 3.3 Check Miner configuration =====
380 380  
381 -[[image:image-20220506181408-1.png||height="451" width="513"]]
382 382  
383 -**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here,**
384 384  
385 385  
386 -==== 4. Installation of Antenna ====
387 387  
388 -(((
389 -HP0D use Fiber Glass Antenna.
390 -)))
391 391  
392 -[[image:1651832158606-882.png]]
393 393  
394 -(((
395 -
396 -)))
397 397  
398 -(((
399 -User need to connect antenna cable’s SMA connector to the HP03 and connect N-Type connector to antenna and install as below:
400 -)))
335 +1.
336 +11. Check Miner configuration
401 401  
402 -(((
403 -[[image:1651832205608-998.png||height="349" width="198"]]
404 -)))
338 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image021.png]]
405 405  
406 -==== 5. SSH Access for Linux console ====
340 +**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here,**
407 407  
408 -(((
409 -IP address:  IP address of HP0D or hostname of HP0D (Such as dragino-63920a)
410 -)))
411 411  
412 -(((
413 -Port:         22
414 -)))
415 415  
416 -(((
417 -User Name:      **root**
418 -)))
419 419  
420 -(((
421 -Password:         **Randomly generated （(% class="mark" %)found on device’s label(%%) ）**
422 -)))
423 423  
424 -(((
425 -After logging in, you will be in the Linux console and can enter commands as shown below.
426 -)))
346 +1. Installation of Antenna
427 427  
428 -[[image:1651832284160-991.png]]
348 +HP0D use Fiber Glass Antenna.
429 429  
350 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.png]]
430 430  
431 -==== **6. How to change the Wireless function of HP0D** ====
352 +User need to connect antenna cable’s SMA connector to the HP03 and connect N-Type connector to antenna and install as below:
432 432  
433 -The wireless function is configured as AP by default and the web page does not support configuration, if you want to configure it as client connection mode, you need to configure it manually in Linux CIL.
434 434  
435 -===== **6.1 Access the Linux console.** =====
355 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.png]]
436 436  
437 -Follow the previous step of Step 5.
438 438  
439 439  
440 -===== 6.2 Install the package of network-manager. =====
441 441  
442 -Run commands:
443 443  
444 -(% class="box infomessage" %)
445 -(((
446 - apt update
447 - apt install network-manager
448 -)))
361 +1. SSH Access for Linux console
449 449  
450 -[[image:image-20220507140730-1.png]]
363 +IP address:  IP address of HP0D or hostname of HP0D (Such as dragino-63920a)
451 451  
365 +Port:         22
452 452  
453 -===== 6.3 Reboot the device. =====
367 +User Name:      **root**
454 454  
455 -Run command:
369 +Password:         **Randomly generated （found on device’s label ）**
456 456  
457 -(% class="box infomessage" %)
458 -(((
459 - reboot
460 -)))
461 461  
462 -[[image:image-20220507140814-2.png]]
372 +After logging in, you will be in the Linux console and can enter commands as shown below.
463 463  
464 -===== 6.4 Check the wireless type =====
374 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.png]]
465 465  
466 -Run command:
467 467  
468 -(% class="box infomessage" %)
469 -(((
470 - iw dev
471 -)))
472 472  
473 -[[image:image-20220507140941-3.png]]
474 474  
475 -===== 6.5 Connect the WiFi. =====
379 +1. Trouble Shootings
380 +11. How to get a wallet address?
476 476  
477 -Run command:
382 +//Download the helium Hotspots APP on the Apple or Google Play store to generate own wallet.//
478 478  
479 -(% class="box infomessage" %)
480 -(((
481 - nmtui
482 -)))
483 483  
484 -[[image:image-20220507140953-4.png]]
385 +1.
386 +11. Onboarding ~-~- Unable to access Web-UI ~-~-> Miner
485 485  
388 +//User can login the HP0D, able to access other Web Pages except miner page//
486 486  
487 -==== 7. Trouble Shootings ====
488 488  
489 -===== 7.1 How to get a wallet address? =====
391 +//If you first boot the device where you need to wait for 10 mins for initialization connection to Helium server.//
490 490  
491 -Download the helium Hotspots APP on the Apple or Google Play store to generate own wallet.
492 492  
394 +1.
395 +11. Onboarding ~-~- Some parameters in miner page show timeout
493 493  
494 -===== 7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner =====
397 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.png]]
495 495  
496 -(((
497 -User can login the HP0D, able to access other Web Pages except miner page.
498 -)))
399 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.png]]
499 499  
500 -(((
501 -If you first boot the device where you need to wait for 10 mins for initialization connection to Helium server.
502 -)))
401 +//HP0D is establish connection to Helium server and not finished. And you might see above.//
503 503  
403 +//It might relate to the network where might up to 10mins//
504 504  
505 -===== 7.3 Onboarding ~-~- Some parameters in miner page show timeout =====
506 506  
507 -[[image:image-20220506182042-2.png||height="250" width="516"]]
406 +1.
407 +11. Onboarding – Bad Gaterway
508 508  
509 -[[image:1651832455372-647.png||height="224" width="520"]]
409 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image027.png]]
510 510  
511 -HP0D is establish connection to Helium server and not finished. And you might see above.It might relate to the network where might up to 10mins.
411 +//This is caused by the process leads too long which just need to refresh the page.//
512 512  
513 513  
514 -===== 7.4 Onboarding – Bad Gaterway =====
414 +1.
415 +11. Onboarding ~-~- Why did QR Code generate is aways fail?
515 515  
516 -(% style="text-align:center" %)
517 -[[image:1651832583790-633.png]]
417 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.png]]
518 518  
519 - This is caused by the process leads too long which just need to refresh the page.
419 +This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail
520 520  
521 521  
522 -7.5 Onboarding ~-~- Why did QR Code generate is aways fail?
422 +1.
423 +11. Onboarding ~-~- Why is the QR Code not quite the same as the manual?
523 523  
524 -(% style="text-align:center" %)
525 -[[image:image-20220506182424-3.png]]
425 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image029.png]]
526 526  
527 - This may be related to the current block height, if the device is synchronizing to the latest height or if the
427 +Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.
528 528  
529 - device block height is much lower than the current height as the above picture like '1 1', the QR code
530 530  
531 - generation may fail.
430 +1.
431 +11. Onboarding – MAC address is ‘Unknown’ after scan QR Code
532 532  
433 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.png]]
533 533  
534 -===== 7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual? =====
435 +If you see the MAC Address shows the ‘Unknown’ where is due to the provision error, please contact us to help you solve.
535 535  
536 -(% style="text-align:center" %)
537 -[[image:1651832742262-209.png||height="297" width="365"]]
538 538  
539 - Please ensure that you enter the correct wallet address and that your network is up and running, the user can
438 +1.
439 +11. Onboarding – MAC address is being refreshed after scan QR Code
540 540  
541 - click the button of ‘Clean’ to re-generate the QR Code.
441 +//After scan QR Code, Mobile APP will connect Helium onboarding server and provide the public key/ wallet address to onboarding server. Server will return the match MAC address for this hotspot.//
542 542  
543 543  
544 -===== 7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code =====
444 +//If you don’t see MAC address, make sure your mobile has good internet connection.//
545 545  
546 -(% style="text-align:center" %)
547 -[[image:1651832811038-780.png||height="462" width="216"]]
446 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image031.png]]
548 548  
549 - If you see the MAC Address shows the ‘Unknown’ where is due to the provision error,
550 550  
551 - please contact us to help you solve.
552 552  
553 553  
554 -===== 7.8 Onboarding – MAC address is being refreshed after scan QR Code =====
451 +1.
452 +11. HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’
555 555  
556 -// // After scan QR Code, Mobile APP will connect Helium onboarding server and provide the
454 +//This is caused by the server connection delay, which does not affect the normal use.//
557 557  
558 - public key/ wallet address to onboarding server. Server will return the match MAC address
456 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image032.png]]
559 559  
560 - for this hotspot.
561 561  
459 +*
460 +*1. Mobile APP crash after scan the QR Code?
461 +* //Make sure you have input the correct Wallet address to generate QR Code.//
462 +* //Make sure your mobile app uses the same wallet address as the one to generate QR Code.//
463 +* //Make sure your mobile app’s relevant permission are enabled.//
464 +* //Known: The Android 11 version may cause this kind of issue.//
562 562  
563 - If you don’t see MAC address, make sure your mobile has good internet connection.
564 -
565 -(% style="text-align:center" %)
566 -[[image:1651832880009-473.png]]
567 -
568 -
569 -===== 7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’ =====
570 -
571 - This is caused by the server connection delay, which does not affect the normal use.
572 -
573 -
574 -(% style="text-align:center" %)
575 -[[image:1651832959907-357.png]]
576 -
577 -===== 7.10 Mobile APP crash after scan the QR Code? =====
578 -
579 -* Make sure you have input the correct Wallet address to generate QR Code.
580 -* Make sure your mobile app uses the same wallet address as the one to generate QR Code.
581 -* Make sure your mobile app’s relevant permission are enabled.
582 -* Known: The Android 11 version may cause this kind of issue.
583 -
584 584  1.
585 585  11. Why the frequency/region is not the same what I purchased?
586 586  
1651828211026-220.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -39.4 KB
Content
1651828250802-391.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -42.6 KB
Content
1651828262668-768.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -67.4 KB
Content
1651828391664-884.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -49.4 KB
Content
1651828401011-970.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -147.0 KB
Content
1651828427715-679.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -538.6 KB
Content
1651828514449-658.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -40.1 KB
Content
1651828687205-178.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -97.6 KB
Content
1651828703680-156.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -113.7 KB
Content
1651829241318-427.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -105.3 KB
Content
1651829292719-315.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -170.7 KB
Content
1651829385186-114.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -84.3 KB
Content
1651829783380-920.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -80.5 KB
Content
1651829907019-256.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
1651830026619-866.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -44.1 KB
Content
1651830081830-946.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.6 KB
Content
1651830206541-813.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
1651830269830-572.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -57.8 KB
Content
1651832158606-882.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -105.3 KB
Content
1651832205608-998.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -170.7 KB
Content
1651832284160-991.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -84.3 KB
Content
1651832455372-647.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -80.5 KB
Content
1651832583790-633.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
1651832742262-209.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -44.1 KB
Content
1651832811038-780.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.6 KB
Content
1651832880009-473.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
1651832959907-357.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -57.8 KB
Content
image-20220506172609-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -73.1 KB
Content
image-20220506173610-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -33.4 KB
Content
image-20220506173921-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20220506181408-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -105.6 KB
Content
image-20220506182042-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -49.7 KB
Content
image-20220506182424-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20220507140730-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220507140814-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -1.9 KB
Content
image-20220507140941-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20220507140953-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -7.2 KB
Content