Skip to Content
Last modified by Xiaoling on 2024/10/21 15:44
From version 73.3
edited by Xiaoling
on 2022/05/07 14:30
Change comment: There is no comment for this version
To version 43.1
edited by Xiaoling
on 2022/05/06 17:39
Change comment: Uploaded new attachment "image-20220506173921-3.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -21,108 +21,122 @@
21 21  
22 22  (((
23 23  (((
24 + The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,
25 +)))
26 +
24 24  (((
25 -The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.
28 + Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges
26 26  )))
30 +
31 +(((
32 + at low data rates.
27 27  )))
28 28  )))
29 29  
30 30  (((
31 31  (((
38 +
39 +)))
40 +)))
41 +
32 32  (((
33 -HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.
43 +(((
44 + HP0D has passed Helium Full Hotspot Approval. It supports the **miner feature from Helium** and has a built-in
34 34  )))
46 +
47 +(((
48 + ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech
35 35  )))
50 +
51 +(((
52 + packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.
36 36  )))
37 37  
38 38  (((
56 + HP0D supports two LoRaWAN servers  at the same time, **users can use HP0D for helium mining**
57 +)))
58 +)))
59 +
39 39  (((
40 40  (((
41 -HP0D supports two LoRaWAN servers  at the same time, **users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time**.
62 +**~ and connects max 2 x LoRaWAN servers at the same time**.
42 42  )))
43 43  )))
65 +
66 +(((
67 +(((
68 +
44 44  )))
70 +)))
45 45  
46 46  (((
47 47  (((
74 +**~ Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use
75 +)))
76 +
48 48  (((
49 -**Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D**. It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
78 + for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.
50 50  )))
51 51  )))
81 +
82 +(((
83 +(((
84 +
52 52  )))
86 +)))
53 53  
54 54  (((
55 55  (((
90 + HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also
91 +)))
92 +
56 56  (((
57 -HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
94 + customize the frequency bands to use in their own LoRaWAN network.
58 58  )))
59 59  )))
60 -)))
61 61  
62 62  
63 63  ===== 1.2 Specifications =====
64 64  
65 65  (((
66 -(((
67 67  **~ Hardware System:**
68 68  )))
69 -)))
70 70  
71 71  (((
72 -(((
73 73   Linux Part:
74 74  )))
75 -)))
76 76  
77 77  * (((
78 -(((
79 79  Raspberry Pi 4
80 80  )))
81 -)))
82 82  
83 83  (((
84 -(((
85 85  **~ Interface:**
86 86  )))
87 -)))
88 88  
89 89  * (((
90 -(((
91 91  10M/100M RJ45 Ports x 1
92 92  )))
93 -)))
94 94  * (((
95 -(((
96 96  LoRaWAN Wireless
97 97  )))
98 -)))
99 99  * (((
100 -(((
101 101  Power Input: 12V 2A, DC
102 102  )))
103 -)))
104 104  
105 105  (((
106 -(((
107 107  **~ Operating Condition:**
108 108  )))
109 -)))
110 110  
111 111  * (((
112 -(((
113 113  Work Temperature: -20 ~~ 65°C
114 114  )))
115 -)))
116 116  * (((
117 -(((
118 118  Storage Temperature: -20 ~~ 65°C
119 119  )))
120 -)))
121 121  * (((
122 -(((
123 123  Power Input: 12V 2A, DC
124 124  )))
125 -)))
126 126  
127 127  ===== 1.3 Features =====
128 128  
... ... @@ -144,55 +144,46 @@
144 144  ===== 1.4 Label info and login name =====
145 145  
146 146  
147 -[[image:1651803959860-394.png||height="500" width="375"]]
161 +(% style="text-align:center" %)
162 +[[image:1651803959860-394.png||height="653" width="490"]]
148 148  
164 +
165 +
149 149  (((
167 +**~ Label information:**
168 +)))
169 +
150 150  (((
151 -**Label information:**
171 +
152 152  )))
153 -)))
154 154  
155 155  (((
156 -(((
157 -**Device host name:**      (% class="mark" %)dragino-xxxxxx
175 +**~ Device host name:**      (% class="mark" %)dragino-xxxxxx
158 158  )))
159 -)))
160 160  
161 161  (((
162 -(((
163 -**Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
179 +**~ Band**:  US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864
164 164  )))
165 -)))
166 166  
167 167  (((
168 -(((
169 -**Miner animal name**: xxx-xxx-xxx
183 +**~ Miner animal name**: xxx-xxx-xxx
170 170  )))
171 -)))
172 172  
173 173  (((
174 -(((
175 -**Miner address**:          112xxxxxx
187 +**~ Miner address**:          112xxxxxx
176 176  )))
177 -)))
178 178  
179 179  (((
180 -(((
181 -**Eth MAC address**: A8: 40: 41: EF: FE: CD
191 +**~ Eth MAC address**: A8: 40: 41: EF: FE: CD
182 182  )))
183 -)))
184 184  
185 185  (((
186 -(((
187 -**Login**:  root/d59f2d5b ((% class="mark" %)the root is the Login account for the Web-UI and SSH.(%%))
195 +**~ Login**:  root/d59f2d5b ((% class="mark" %)the root is the Login account for the Web-UI and SSH.(%%))
188 188  )))
189 -)))
190 190  
191 191  (((
192 -(((
193 -**SN**:  device serial number.
199 +**~ SN**:  device serial number.
194 194  )))
195 -)))
196 196  
197 197  
198 198  ==== 2. Quick Start & Onboarding ====
... ... @@ -199,9 +199,13 @@
199 199  
200 200  (((
201 201  (((
202 -The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.
207 + The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after
203 203  )))
209 +
210 +(((
211 + connecting to its Wi-Fi network, or via its WAN Ethernet port.
204 204  )))
213 +)))
205 205  
206 206  (% class="wikigeneratedid" id="H-2" %)
207 207  (((
... ... @@ -213,55 +213,64 @@
213 213  ====== 2.1.1 via HP0D’s Access Point. ======
214 214  
215 215  (((
216 -(((
217 - At the first boot of HP0D, it will auto generate a Wi-Fi network
218 -
219 -[[image:1651804327535-321.png||height="325" width="199"]]
225 + At the first boot of HP0D, it will auto generate a Wi-Fi network[[image:1651804327535-321.png||height="325" style="float:right" width="199"]]
220 220  )))
221 -)))
222 222  
223 223  (((
224 -(((
225 225  
226 226  )))
227 -)))
228 228  
229 229  (((
230 -(((
231 -(% class="box infomessage" %)
232 -(((
233 233   called           : **//HPD-dragino-xxxxxx//**
234 234  )))
235 -)))
236 -)))
237 237  
238 238  (((
239 -(((
240 -(% class="box infomessage" %)
241 -(((
242 242   with password:  **//dragino+dragino//**
243 243  )))
239 +
240 +(((
241 +
244 244  )))
243 +
244 +(((
245 +
245 245  )))
246 246  
247 247  (((
249 + You can use a PC to connect to this Wi-Fi network. The PC will
250 +)))
251 +
248 248  (((
249 - You can use a PC to connect to this Wi-Fi network. The PC will get an IP address 10.130.1.xxx and the HP0D has the default  IP 10.130.1.1
253 + get an IP address 10.130.1.xxx and the HP0D has the default
250 250  )))
255 +
256 +(((
257 + IP 10.130.1.1
251 251  )))
252 252  
253 -[[image:1651804397792-591.png||height="402" width="763"]]
254 254  
255 255  
256 256  
263 +
264 +
265 +(% style="text-align:center" %)
266 +[[image:1651804397792-591.png]]
267 +
268 +
269 +
257 257  ====== 2.1.2 Connect via HP0D hostname ======
258 258  
259 -(((
260 -Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D Web-UI via HP0D’s hostname.
261 -)))
272 + Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your
262 262  
263 -Like: __**//http:~/~/dragino-4ba54a//**__
274 + PC(Windows/Mac/Ubuntu) connect the same network with the HP0D, you can access the HP0D
264 264  
276 + Web-UI via HP0D’s hostname.
277 +
278 +
279 + Like: __**//http:~/~/dragino-4ba54a//**__
280 +
281 +
282 +(% style="text-align:center" %)
265 265  [[image:1651804629009-699.png]]
266 266  
267 267  
... ... @@ -268,25 +268,19 @@
268 268  ====== 2.1.3 Connect via Ethernet Port ======
269 269  
270 270  (((
271 -(((
272 272   Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the
273 273  )))
274 -)))
275 275  
276 276  (((
277 -(((
278 278   router’s management portal, you should be able to find what IP address the router has assigned to the HP0D.
279 279  )))
280 -)))
281 281  
282 282  (((
283 283  
284 284  )))
285 285  
286 - If you get the IP address form route, like~:// (% class="mark" %)**10.130.2.42**(%%),// you can use this IP address to connect the WEB UI
300 + If you get the IP address form route, like~:// (% class="mark" %)**10.130.2.42**(%%),// you can use this IP address to connect the WEB UI or SSH access of HP0D.
287 287  
288 - or SSH access of HP0D.
289 -
290 290  (% style="text-align:center" %)
291 291  [[image:1651804782523-623.png]]
292 292  
... ... @@ -303,7 +303,7 @@
303 303  )))
304 304  
305 305  (% style="text-align:center" %)
306 -[[image:image-20220506140312-1.png||height="435" width="438"]]
318 +[[image:image-20220506140312-1.png]]
307 307  
308 308  
309 309  ===== 2.3 Onboarding Hotspot =====
... ... @@ -414,239 +414,144 @@
414 414  [[image:1651828703680-156.png||height="349" width="672"]]
415 415  
416 416  
417 -===== 3.3 Check Miner configuration =====
418 418  
419 -(% style="text-align:center" %)
420 -[[image:image-20220506181408-1.png||height="451" width="513"]]
421 421  
422 -**~ Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid**
423 423  
424 -**~ button of Update, and then wait 10mins to check here,**
425 425  
426 426  
427 -==== 4. Installation of Antenna ====
428 428  
429 -(((
430 - HP0D use Fiber Glass Antenna.
431 -)))
435 +1.
436 +11. Check Miner configuration
432 432  
433 -(% style="text-align:center" %)
434 -[[image:1651832158606-882.png]]
438 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image021.png]]
435 435  
436 -(((
437 -
438 -)))
440 +**Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here,**
439 439  
440 -(((
441 -
442 -)))
443 443  
444 -(((
445 - User need to connect antenna cable’s SMA connector to the HP03 and connect N-Type connector
446 -)))
447 447  
448 -(((
449 - to antenna and install as below:
450 -)))
451 451  
452 -(((
453 -(% style="text-align:center" %)
454 -[[image:1651832205608-998.png||height="349" width="198"]]
455 -)))
456 456  
457 -==== 5. SSH Access for Linux console ====
446 +1. Installation of Antenna
458 458  
459 -(((
460 - IP address:  IP address of HP0D or hostname of HP0D (Such as dragino-63920a)
461 -)))
448 +HP0D use Fiber Glass Antenna.
462 462  
463 -(((
464 - Port:         22
465 -)))
450 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.png]]
466 466  
467 -(((
468 - User Name:      **root**
469 -)))
452 +User need to connect antenna cable’s SMA connector to the HP03 and connect N-Type connector to antenna and install as below:
470 470  
471 -(((
472 - Password:         **Randomly generated （(% class="mark" %)found on device’s label(%%) ）**
473 -)))
474 474  
475 -(((
476 -
477 -)))
455 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.png]]
478 478  
479 -(((
480 - After logging in, you will be in the Linux console and can enter commands as shown below.
481 -)))
482 482  
483 -(% style="text-align:center" %)
484 -[[image:1651832284160-991.png]]
485 485  
486 486  
487 -==== **6. How to change the Wireless function of HP0D** ====
488 488  
489 - // The wireless function is configured as AP by default and the web page does not support configuration, //
461 +1. SSH Access for Linux console
490 490  
491 -// if you want to configure it as client connection mode, you need to configure it manually in Linux CIL.//
463 +IP address:  IP address of HP0D or hostname of HP0D (Such as dragino-63920a)
492 492  
493 -===== **6.1 Access the Linux console.** =====
465 +Port:         22
494 494  
495 - Follow the previous step of Step 5.
467 +User Name:      **root**
496 496  
469 +Password:         **Randomly generated （found on device’s label ）**
497 497  
498 -===== 6.2 Install the package of network-manager. =====
499 499  
500 - Run commands:
472 +After logging in, you will be in the Linux console and can enter commands as shown below.
501 501  
502 -(% class="box infomessage" %)
503 -(((
504 - apt update
505 - apt install network-manager
506 -)))
474 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.png]]
507 507  
508 -[[image:image-20220507140730-1.png]]
509 509  
510 510  
511 511  
512 -===== 6.3 Reboot the device. =====
479 +1. Trouble Shootings
480 +11. How to get a wallet address?
513 513  
514 - Run command:
482 +//Download the helium Hotspots APP on the Apple or Google Play store to generate own wallet.//
515 515  
516 -(% class="box infomessage" %)
517 -(((
518 - reboot
519 -)))
520 520  
521 -[[image:image-20220507140814-2.png]]
485 +1.
486 +11. Onboarding ~-~- Unable to access Web-UI ~-~-> Miner
522 522  
523 -===== 6.4 Check the wireless type =====
488 +//User can login the HP0D, able to access other Web Pages except miner page//
524 524  
525 - Run command:
526 526  
527 -(% class="box infomessage" %)
528 -(((
529 - iw dev
530 -)))
491 +//If you first boot the device where you need to wait for 10 mins for initialization connection to Helium server.//
531 531  
532 -[[image:image-20220507140941-3.png]]
533 533  
534 -===== 6.5 Connect the WiFi. =====
494 +1.
495 +11. Onboarding ~-~- Some parameters in miner page show timeout
535 535  
536 - Run command:
497 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.png]]
537 537  
538 -(% class="box infomessage" %)
539 -(((
540 - nmtui
541 -)))
499 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.png]]
542 542  
543 -[[image:image-20220507140953-4.png]]
501 +//HP0D is establish connection to Helium server and not finished. And you might see above.//
544 544  
503 +//It might relate to the network where might up to 10mins//
545 545  
546 546  
547 -==== 7. Trouble Shootings ====
506 +1.
507 +11. Onboarding – Bad Gaterway
548 548  
549 -===== 7.1 How to get a wallet address? =====
509 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image027.png]]
550 550  
551 -// // Download the helium Hotspots APP on the Apple or Google Play store to generate own wallet.
511 +//This is caused by the process leads too long which just need to refresh the page.//
552 552  
553 553  
554 -===== 7.2 Onboarding ~-~- Unable to access Web-UI ~-~-> Miner =====
514 +1.
515 +11. Onboarding ~-~- Why did QR Code generate is aways fail?
555 555  
556 -(((
557 - User can login the HP0D, able to access other Web Pages except miner page
558 -)))
517 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.png]]
559 559  
560 -(((
561 - If you first boot the device where you need to wait for 10 mins for initialization connection to Helium server.
562 -)))
519 +This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail
563 563  
564 564  
565 -===== 7.3 Onboarding ~-~- Some parameters in miner page show timeout =====
522 +1.
523 +11. Onboarding ~-~- Why is the QR Code not quite the same as the manual?
566 566  
567 -(% style="text-align:center" %)
568 -[[image:image-20220506182042-2.png||height="250" width="516"]]
525 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image029.png]]
569 569  
570 -(% style="text-align:center" %)
571 -[[image:1651832455372-647.png||height="224" width="520"]]
527 +Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.
572 572  
573 573  
574 - HP0D is establish connection to Helium server and not finished. And you might see above.
530 +1.
531 +11. Onboarding – MAC address is ‘Unknown’ after scan QR Code
575 575  
576 - It might relate to the network where might up to 10mins
533 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.png]]
577 577  
535 +If you see the MAC Address shows the ‘Unknown’ where is due to the provision error, please contact us to help you solve.
578 578  
579 -===== 7.4 Onboarding – Bad Gaterway =====
580 580  
581 -(% style="text-align:center" %)
582 -[[image:1651832583790-633.png]]
538 +1.
539 +11. Onboarding – MAC address is being refreshed after scan QR Code
583 583  
584 - This is caused by the process leads too long which just need to refresh the page.
541 +//After scan QR Code, Mobile APP will connect Helium onboarding server and provide the public key/ wallet address to onboarding server. Server will return the match MAC address for this hotspot.//
585 585  
586 586  
587 -7.5 Onboarding ~-~- Why did QR Code generate is aways fail?
544 +//If you don’t see MAC address, make sure your mobile has good internet connection.//
588 588  
589 -(% style="text-align:center" %)
590 -[[image:image-20220506182424-3.png]]
546 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image031.png]]
591 591  
592 - This may be related to the current block height, if the device is synchronizing to the latest height or if the
593 593  
594 - device block height is much lower than the current height as the above picture like '1 1', the QR code
595 595  
596 - generation may fail.
597 597  
551 +1.
552 +11. HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’
598 598  
599 -===== 7.6 Onboarding ~-~- Why is the QR Code not quite the same as the manual? =====
554 +//This is caused by the server connection delay, which does not affect the normal use.//
600 600  
601 -(% style="text-align:center" %)
602 -[[image:1651832742262-209.png||height="297" width="365"]]
556 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image032.png]]
603 603  
604 - Please ensure that you enter the correct wallet address and that your network is up and running, the user can
605 605  
606 - click the button of ‘Clean’ to re-generate the QR Code.
559 +*
560 +*1. Mobile APP crash after scan the QR Code?
561 +* //Make sure you have input the correct Wallet address to generate QR Code.//
562 +* //Make sure your mobile app uses the same wallet address as the one to generate QR Code.//
563 +* //Make sure your mobile app’s relevant permission are enabled.//
564 +* //Known: The Android 11 version may cause this kind of issue.//
607 607  
608 -
609 -===== 7.7 Onboarding – MAC address is ‘Unknown’ after scan QR Code =====
610 -
611 -(% style="text-align:center" %)
612 -[[image:1651832811038-780.png||height="462" width="216"]]
613 -
614 - If you see the MAC Address shows the ‘Unknown’ where is due to the provision error,
615 -
616 - please contact us to help you solve.
617 -
618 -
619 -===== 7.8 Onboarding – MAC address is being refreshed after scan QR Code =====
620 -
621 -// // After scan QR Code, Mobile APP will connect Helium onboarding server and provide the
622 -
623 - public key/ wallet address to onboarding server. Server will return the match MAC address
624 -
625 - for this hotspot.
626 -
627 -
628 - If you don’t see MAC address, make sure your mobile has good internet connection.
629 -
630 -(% style="text-align:center" %)
631 -[[image:1651832880009-473.png]]
632 -
633 -
634 -===== 7.9 HP0D Web ~-~-> Miner ~-~-> Version shows ‘short’ =====
635 -
636 - This is caused by the server connection delay, which does not affect the normal use.
637 -
638 -
639 -(% style="text-align:center" %)
640 -[[image:1651832959907-357.png]]
641 -
642 -===== 7.10 Mobile APP crash after scan the QR Code? =====
643 -
644 -* Make sure you have input the correct Wallet address to generate QR Code.
645 -* Make sure your mobile app uses the same wallet address as the one to generate QR Code.
646 -* Make sure your mobile app’s relevant permission are enabled.
647 -* Known: The Android 11 version may cause this kind of issue.
648 -
649 -1.
566 +1.
650 650  11. Why the frequency/region is not the same what I purchased?
651 651  
652 652  //Each HP0D is inspected and configured prior to shipping.//
... ... @@ -654,7 +654,7 @@
654 654  //If your HP0D Web-UI – Miner region is not the same with the shell labels, please contact our support team that will solve this issue for you.//
655 655  
656 656  
657 -1.
574 +1.
658 658  11. Can use the frequency to a region where is not support?
659 659  
660 660  //Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link//
... ... @@ -662,7 +662,7 @@
662 662  [[https:~~/~~/docs.helium.com/lorawan-on-helium/frequency-plans>>url:https://docs.helium.com/lorawan-on-helium/frequency-plans]]
663 663  
664 664  
665 -1.
582 +1.
666 666  11. Can change the frequency of the HP0D Miner?
667 667  
668 668  //We do not recommend doing this, it may damage your device//
1651830026619-866.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -44.1 KB
Content
1651830081830-946.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.6 KB
Content
1651830206541-813.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
1651830269830-572.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -57.8 KB
Content
1651832158606-882.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -105.3 KB
Content
1651832205608-998.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -170.7 KB
Content
1651832284160-991.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -84.3 KB
Content
1651832455372-647.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -80.5 KB
Content
1651832583790-633.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
1651832742262-209.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -44.1 KB
Content
1651832811038-780.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.6 KB
Content
1651832880009-473.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.7 KB
Content
1651832959907-357.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -57.8 KB
Content
image-20220506181408-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -105.6 KB
Content
image-20220506182042-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -49.7 KB
Content
image-20220506182424-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -37.4 KB
Content
image-20220507140730-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20220507140814-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -1.9 KB
Content
image-20220507140941-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20220507140953-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -7.2 KB
Content