Skip to Content
Version 137.1 by Xiaoye on 2023/01/11 09:48
Hide last authors
Xiaoling 69.2 1 (% style="text-align:center" %)
Edwin Chen 43.1 2 [[image:image-20220620202334-2.png||height="467" width="809"]]
Xiaoye 4.1 3
4
5 (((
Xiaoling 69.2 6
Xiaoye 4.1 7
8
9 )))
Xiaoye 5.1 10
11 **Table of Contents：**
12
13 {{toc/}}
14
Xiaoling 69.2 15
Xiaoling 83.2 16
17
18
Xiaoling 117.2 19 = 1. Introduction =
Xiaoye 5.1 20
Xiaoling 117.2 21 == 1.1 What is LPS8v2 ==
Xiaoling 83.2 22
Xiaoye 5.1 23
24 (((
Xiaoling 69.7 25 (((
Edwin Chen 44.1 26 The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
Xiaoling 69.7 27 )))
Xiaoye 6.2 28
Xiaoling 69.7 29 (((
Edwin Chen 44.1 30 The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
Xiaoling 69.7 31 )))
Xiaoye 6.2 32
Xiaoling 69.7 33 (((
Edwin Chen 44.1 34 LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
Xiaoling 69.7 35 )))
Xiaoye 6.2 36
Xiaoling 69.7 37 (((
Edwin Chen 43.1 38 Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
Xiaoling 69.7 39 )))
Xiaoye 6.2 40
Xiaoling 69.7 41 (((
Edwin Chen 44.1 42 LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
Xiaoling 69.7 43 )))
Edwin Chen 43.1 44
45
Xiaoling 117.2 46 == 1.2 Specifications ==
Xiaoling 69.2 47
Xiaoye 6.2 48
Xiaoling 69.2 49 (% style="color:#037691" %)**Hardware System:**
50
Edwin Chen 46.1 51 * CPU: Quad-core Cortex-A7 1.2Ghz
Xiaoye 6.2 52 * RAM: 512MB
53 * eMMC: 4GB
54
Xiaoling 69.2 55 (% style="color:#037691" %)**Interface:**
Xiaoye 6.2 56
57 * 10M/100M RJ45 Ports x 1
Edwin Chen 45.1 58 * Multi-Channel LoRaWAN Wireless
Edwin Chen 43.1 59 * WiFi 802.11 b/g/n
Xiaoye 6.2 60
Xiaoling 69.2 61 (% style="color:#037691" %)**Operating Condition:**
Xiaoye 6.2 62
63 * Work Temperature: -20 ~~ 65°C
64 * Storage Temperature: -20 ~~ 65°C
Edwin Chen 45.1 65 * Power Input: 5V, 2A, DC
Xiaoye 6.2 66
Xiaoling 134.2 67
Xiaoling 117.2 68 == 1.3 Features ==
69
70
Xiaoye 6.2 71 * Open Source Debian system
72 * Managed by Web GUI, SSH via WAN or WiFi
Edwin Chen 45.1 73 * Remote Management
Edwin Chen 49.1 74 * Auto-provisioning for batch deployment and management
Xiaoye 6.2 75 * LoRaWAN Gateway
76 * 10 programmable parallel demodulation paths
Xiaoye 26.1 77 * Pre-configured to support different LoRaWAN regional settings.
Kilight Cao 11.1 78 * Allow customizing LoRaWAN regional parameters.
Edwin Chen 45.1 79 * Different kinds of LoRaWAN Connections such as
80 ** Semtech UDP Packet Forwarder
81 ** LoRaWAN Basic Station
82 ** ChirpStack-Gateway-Bridge (MQTT)
Xiaoling 69.2 83 * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
84 * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
Xiaoye 6.2 85
Xiaoling 134.2 86
Xiaoling 117.2 87 == 1.4 Block Diagram ==
Xiaoling 69.3 88
Xiaoye 35.1 89
Xiaoling 69.3 90
Xiaoling 117.2 91 == 1.5 LED Indicators ==
92
93
Xiaoye 35.1 94 LPS8-V2 has totally four LEDs, They are:
95
96
Xiaoling 69.3 97 (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
Xiaoye 35.1 98
Xiaoling 107.3 99 (% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
Xiaoye 35.1 100
Xiaoling 107.3 101 (% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
Xiaoye 35.1 102
Xiaoye 84.1 103 // ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
Xiaoye 35.1 104
Xiaoye 84.1 105 // ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
Xiaoye 35.1 106
Xiaoling 69.4 107 // ✓** SOLID RED:** Device doesn't have an Internet connection.//
Xiaoye 35.1 108
Xiaoye 84.1 109 (% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
Xiaoye 35.1 110
111
Xiaoling 117.2 112 == 1.6 Button Intruction ==
Xiaoling 107.2 113
Xiaoling 69.3 114
Xiaoye 84.1 115 LPS8-V2 has a black toggle button, which is:
116
117
118 (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
119
120 // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
121
122
Xiaoye 85.1 123 (% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
Xiaoye 84.1 124
125 //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
126
Xiaoling 107.2 127
Xiaoling 117.2 128 = 2. Quick Start =
Xiaoling 107.2 129
Xiaoye 8.1 130
Xiaoye 26.1 131 The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
Xiaoye 8.1 132
Xiaoye 26.1 133 In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
Xiaoye 8.1 134
135
Xiaoling 117.2 136 == 2.1 Connects to the network and accesses the gateway Web UI ==
Xiaoling 69.4 137
Xiaoling 117.2 138 == 2.1.1 connect the network ==
Xiaoye 8.1 139
140
Xiaoling 69.4 141 === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
Xiaoye 26.1 142
Xiaoling 69.4 143
Xiaoling 69.10 144 (((
Xiaoling 122.3 145 Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
Xiaoling 69.10 146 )))
Xiaoye 26.1 147
Xiaoling 69.10 148 (((
Xiaoye 35.1 149 You can also use this IP to connect.
Xiaoling 69.10 150 )))
Xiaoye 35.1 151
152 [[image:image-20220622100129-1.png||height="332" width="1263"]]
153
Xiaoling 134.2 154
Kilight Cao 133.1 155 === (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ===
Xiaoye 35.1 156
157
Kilight Cao 133.1 158 [[image:image-20230107084650-2.png||height="310" width="839"]]
Xiaoye 35.1 159
Xiaoling 69.4 160
Xiaoye 137.1 161 (% style="color:blue" %)**Steps to connect via fallback IP:**
Kilight Cao 133.1 162
Xiaoye 137.1 163 ~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
Kilight Cao 133.1 164
165 2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
166
Xiaoye 137.1 167 As in the below photo:
Kilight Cao 133.1 168
169 [[image:image-20230107085904-4.png||height="443" width="361"]]
170
171 3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
172
173
Xiaoye 137.1 174 [[image:image-20230111094247-2.png||height="619" width="1250"]]
175
176
177
Kilight Cao 133.1 178 === (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ===
179
180
Xiaoye 35.1 181 [[image:image-20220622100542-2.png||height="369" width="1256"]]
182
183
Xiaoling 69.4 184 Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
Xiaoye 35.1 185
186
187 [[image:image-20220622102702-6.png]]
188
189
Xiaoling 69.4 190
Xiaoye 35.1 191 **Wi-Fi configuration successful**
192
193
194 [[image:image-20220622102847-7.png]]
195
Xiaoling 69.4 196
Xiaoling 107.2 197 [[image:image-20220622102901-8.png||height="476" width="938"]]
Xiaoye 35.1 198
199
Kilight Cao 128.1 200 == 2.1.2 Access Configure Web UI ==
Kilight Cao 122.4 201
202
203 **Web Interface**
204
205 Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
206
207
Kilight Cao 134.1 208 [[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
Kilight Cao 122.4 209
210 You will see the login interface of LPS8-V2 as shown below.
211
212 The account details for Web Login are:
213
214 (% style="color:#4f81bd" %)**User Name: root**
215
216 (% style="color:#4f81bd" %)**Password:   dragino**
217
Kilight Cao 127.1 218 [[image:image-20230106153501-1.png||height="367" width="894"]]
Kilight Cao 122.4 219
Xiaoling 128.2 220
Xiaoling 117.2 221 == 2.2 The LPS8-V2 is registered and connected to The Things Network ==
Xiaoye 35.1 222
Xiaoling 117.2 223 === 2.2.1 Select your area frequency ===
Xiaoye 26.1 224
225
Xiaoling 69.12 226 (((
Xiaoye 41.1 227 First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
Xiaoling 83.3 228
229
Xiaoling 69.12 230 )))
Xiaoye 26.1 231
Xiaoling 107.2 232 [[image:image-20220622103332-9.png||height="485" width="938"]]
Xiaoye 26.1 233
234
Xiaoling 117.2 235 === 2.2.2 Get the only gateway EUI ===
Xiaoling 69.4 236
Xiaoye 41.1 237
238 Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
239
Xiaoling 83.4 240
Xiaoling 107.2 241 [[image:image-20220622103355-10.png||height="698" width="949"]]
Xiaoye 41.1 242
243
Xiaoling 69.4 244 (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
Xiaoye 41.1 245
Xiaoling 69.4 246
Xiaoye 41.1 247 **➢ Europe 1:**  corresponding Gateway server address:  **eu1.cloud.thethings.network**
248
249 **➢ North America 1:**  corresponding Gateway server address:  **nam1.cloud.thethings.network**
250
251 **➢ Australia 1: ** corresponding Gateway server address:  **au1.cloud.thethings.network**
252
253 **➢ Legacy V2 Console:** TTN v2 shuts down in December 2021
254
255
256 [[image:image-20220622103956-12.png]]
257
258
Xiaoling 117.2 259 == 2.2.3 Register the gateway to The Things Network ==
Xiaoye 41.1 260
261
262 **Login to The Things Network**
263
264 [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
265
Xiaoling 69.4 266
Xiaoye 41.1 267 **Add the gateway**
268
269 [[image:image-20220622104252-13.png||height="511" width="953"]]
270
271
272 **Get it online**
273
274
Xiaoling 117.2 275 = 3. Web Configure Pages =
Xiaoling 69.4 276
Xiaoling 117.2 277 == 3.1 Home ==
Xiaoye 8.1 278
279
Kilight Cao 23.1 280 //Shows the system running status~://
Kilight Cao 15.1 281
Xiaoling 107.2 282 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
Xiaoling 69.4 283
Xiaoling 83.4 284
Xiaoling 117.2 285 == 3.2 LoRa Settings ==
Xiaoling 107.2 286
Xiaoling 117.2 287 === 3.2.1 LoRa ~-~-> LoRa ===
Kilight Cao 15.1 288
289
Kilight Cao 23.1 290 //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
Kilight Cao 15.1 291
Kilight Cao 23.1 292 //Different LPS8v2 hardware versions can support different frequency ranges~://
Kilight Cao 15.1 293
Xiaoye 83.1 294 * (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
Kilight Cao 23.1 295 * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
Xiaoye 8.1 296
Kilight Cao 23.1 297 (% class="wikigeneratedid" %)
Xiaoling 69.4 298 //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
Kilight Cao 23.1 299
Xiaoling 83.4 300
Kilight Cao 23.1 301 (% class="wikigeneratedid" %)
302 [[image:image-20220616110739-1.png||height="372" width="682"]]
303
304
Xiaoling 69.4 305 (((
Xiaoling 103.3 306 (% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
Xiaoling 69.4 307 )))
Kilight Cao 23.1 308
309
Xiaoling 117.2 310 == 3.3 LoRaWAN Settings ==
Kilight Cao 23.1 311
Xiaoling 117.2 312 === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
Kilight Cao 23.1 313
314
315 //This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
316
Xiaoling 83.4 317
Kilight Cao 23.1 318 [[image:image-20220616111932-2.png||height="516" width="672"]]
319
320
Xiaoling 117.2 321 === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
Xiaoling 69.5 322
Kilight Cao 23.1 323
324 //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
325
Xiaoling 83.4 326
Kilight Cao 23.1 327 [[image:image-20220616113246-3.png||height="396" width="672"]]
328
329
Xiaoling 69.12 330 (((
Xiaoling 103.4 331 Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
Xiaoling 69.12 332 )))
Kilight Cao 23.1 333
334
Xiaoling 117.2 335 == 3.4 Network Settings ==
Xiaoling 69.5 336
Xiaoling 117.2 337 === 3.4.1 Network ~-~-> WiFi ===
Kilight Cao 23.1 338
339
340 [[image:image-20220616114756-4.png||height="251" width="669"]]
341
342
Xiaoling 117.2 343 === 3.4.2 Network ~-~-> System Status ===
Xiaoling 69.5 344
Kilight Cao 23.1 345
Xiaoye 83.1 346 [[image:image-20220820134112-2.png||height="539" width="668"]]
Kilight Cao 23.1 347
348
Xiaoling 117.2 349 === 3.4.3 Network ~-~-> Firewall ===
Xiaoling 69.5 350
Kilight Cao 23.1 351
352 [[image:image-20220616115351-6.png||height="244" width="661"]]
353
354
Xiaoling 117.2 355 == 3.5 System ==
Xiaoling 69.5 356
Kilight Cao 122.1 357 === 3.5.1 System ~-~-> System Overview ===
Kilight Cao 23.1 358
359
360 Shows the system info:
361
Xiaoling 109.2 362 [[image:image-20220917144512-5.png||height="618" width="853"]]
Kilight Cao 23.1 363
Xiaoling 69.5 364
Kilight Cao 127.1 365 === 3.5.2 System ~-~-> System General ===
Xiaoling 107.2 366
Kilight Cao 23.1 367
Kilight Cao 133.1 368 In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
Kilight Cao 127.1 369
Kilight Cao 133.1 370 [[image:image-20230107084158-1.png||height="543" width="844"]]
Kilight Cao 127.1 371
372
373 === 3.5.3 System ~-~-> Backup/Restore ===
374
375
Xiaoling 109.2 376 [[image:image-20220917144725-6.png||height="208" width="869"]]
Kilight Cao 23.1 377
378
Kilight Cao 127.1 379 === 3.5.4 System ~-~-> Remoteit ===
Kilight Cao 121.1 380
381
382 In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
383
384
385 the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
386
387 [[image:image-20221230092303-2.png]]
388
389
Xiaoling 117.2 390 = 4. Build-in Server =
Kilight Cao 23.1 391
Xiaoye 53.1 392
Xiaoye 83.1 393 The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
Xiaoye 53.1 394
Xiaoling 83.4 395
Xiaoling 107.2 396 [[image:image-20220820115644-1.png||height="217" width="778"]]
Xiaoye 53.1 397
398
Xiaoling 83.4 399 (% style="color:red" %)**Note:**
Kilight Cao 58.1 400
Xiaoye 83.1 401 **Path**: System ~-~-> Built-in Server
Kilight Cao 58.1 402
403
Xiaoye 83.1 404 **Troubleshooting:**
Kilight Cao 59.1 405
Xiaoye 60.1 406
Xiaoye 83.1 407 **~ 1. URL does not jump properly**
Xiaoye 60.1 408
Kilight Cao 86.1 409 For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
Xiaoye 60.1 410
Kilight Cao 86.1 411 For the Node-Red, you can use the local IP address and the port is 1880 to access it.
Kilight Cao 57.1 412
413
Xiaoling 117.2 414 == 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
Xiaoling 83.4 415
Kilight Cao 58.1 416
Xiaoling 109.3 417 You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
Xiaoling 69.5 418
Xiaoye 83.1 419 Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
Xiaoye 67.1 420
421
Xiaoye 83.1 422 Login account:
Xiaoling 69.5 423
Xiaoye 83.1 424 **User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
Xiaoye 53.1 425
Xiaoye 83.1 426 **Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
Xiaoye 53.1 427
Kilight Cao 59.1 428
Xiaoye 83.1 429 [[image:image-20220725171719-1.png||height="570" width="769"]]
Kilight Cao 59.1 430
431
Xiaoling 117.2 432 == 4.2 Application Server ~-~- Node-Red ==
Xiaoye 60.1 433
Xiaoling 69.6 434
Xiaoling 109.3 435 You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
Xiaoye 53.1 436
437
Kilight Cao 87.1 438 Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
Xiaoye 61.1 439
440
Xiaoye 83.1 441 [[image:image-20220725172124-3.png||height="610" width="843"]]
Xiaoye 61.1 442
443
444
Xiaoling 117.2 445 === **Using Node-Red, InfluxDB and Grafana** ===
Xiaoye 115.1 446
Xiaoye 116.1 447 The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
Xiaoye 115.1 448
Xiaoye 116.1 449
450 the users can refer to this link to install them.
451
452 [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
453
454
Xiaoling 117.2 455 = 5. How users can access LPS8v2 using serial USB =
Xiaoling 69.6 456
Kilight Cao 74.1 457
Xiaoling 109.3 458 (% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
Kilight Cao 74.1 459
Xiaoling 109.3 460
Kilight Cao 74.1 461 Port 1 of the UART on the LPS8v2 is GND
462
Kilight Cao 79.1 463 (% class="box infomessage" %)
464 (((
Xiaoling 107.2 465 **TXD  <~-~--> UART RXD (Gray line)**
Kilight Cao 74.1 466
Xiaoling 107.2 467 **RXD  <~-~--> UART TXD (White line)**
Kilight Cao 74.1 468
Xiaoling 107.2 469 **GND <~-~--> GND (Black line)**
Kilight Cao 79.1 470 )))
Kilight Cao 74.1 471
472
Kilight Cao 77.1 473 **LPS8v2 UART connection photo**
474
475 [[image:image-20220804163015-1.png||height="621" width="466"]]
476
477
Kilight Cao 78.1 478 In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
Kilight Cao 77.1 479
Xiaoling 83.4 480
Kilight Cao 77.1 481 [[image:image-20220804164928-3.png||height="320" width="332"]]
482
Xiaoling 83.4 483
Kilight Cao 77.1 484 [[image:image-20220804164747-2.png||height="622" width="594"]]
485
Xiaoling 83.4 486
Xiaoling 117.2 487 = 6. Use the helium gateway-rs as the Data-only Hotspot =
Xiaoling 107.2 488
Xiaoling 83.4 489
Xiaoye 102.1 490 == **Step 1: Configure Frequency Band** ==
491
492
493 //Each country has a requirement for frequency region. Choose the right one for your area.//
494
495 [[image:image-20220905164308-1.png]]
496
497
Xiaoling 107.2 498
Xiaoling 103.5 499 == **Step 2: Configure the forward address** ==
Xiaoye 102.1 500
501
502 **Select one of the servers to configure.**
503
504 **For example:**
505
506 [[image:image-20220905164847-2.png]]
507
508
Xiaoling 107.2 509
Xiaoling 103.5 510 == **Step 3: Download and Install the Helium-gateway-rs** ==
Xiaoye 102.1 511
512
513 **Access the gateway CLI via SSH.**
514
515 [[image:image-20220905165222-3.png]]
516
517
518 **Download gateway-rs.**
519
520 [[image:image-20220905165715-5.png]]
521
522 (% class="box infomessage" %)
523 (((
Xiaoling 103.7 524 **Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
Xiaoye 102.1 525 )))
526
527
528 **Install gateway-rs.**
529
530 [[image:image-20220905165917-7.png]]
531
532 (% class="box infomessage" %)
533 (((
Xiaoling 103.7 534 **Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
Xiaoye 102.1 535 )))
536
537
538 **Modify configuration.**
539
540
541 [[image:image-20220905173847-12.png]]
542
543
544 (% class="box infomessage" %)
545 (((
Xiaoling 103.7 546 **region=<Enter regional parameters> \
Xiaoye 102.1 547 && sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
Xiaoling 103.7 548 && sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
Xiaoye 102.1 549 )))
550
551
552 **Restart the helium_gateway**
553
554 [[image:image-20220905170920-9.png]]
555
556
557 (% class="box infomessage" %)
558 (((
Xiaoling 103.7 559 **systemctl restart helium_gateway**
Xiaoye 102.1 560 )))
561
562
Xiaoling 103.7 563 **Check the helium_gateway Log：**
Xiaoye 102.1 564
565 [[image:image-20220905173952-13.png]]
566
567
568 (% class="box infomessage" %)
569 (((
Xiaoling 103.7 570 **journalctl -u helium_gateway -f**
Xiaoye 102.1 571 )))
572
573
Xiaoling 103.8 574 (% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
Xiaoye 102.1 575
576 where the helium gateway log is shown:
577
578 [[image:image-20220905174534-14.png]]
579
580
Xiaoling 103.8 581 So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
Xiaoye 102.1 582
583
Xiaoling 117.2 584 = 7. OTA System Update =
Xiaoling 107.2 585
Kilight Cao 23.1 586
Kilight Cao 117.1 587 LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
Xiaoling 69.6 588
Xiaoye 112.1 589
Xiaoling 117.2 590 = 8. Trouble Shooting =
Xiaoye 112.1 591
Kilight Cao 117.1 592 == 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
593
594
Xiaoye 113.1 595 [[image:image-20220920135918-1.png]]
Xiaoye 112.1 596
Xiaoling 113.2 597
Xiaoye 112.1 598 This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
599
600 By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
601
602
603 So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
604
605 **Click the update URL button to configure the URL with the current eth port address.**
606
607 [[image:image-20220920141936-2.png]]
608
609
Xiaoling 117.2 610 = (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
Xiaoye 112.1 611
612
Kilight Cao 14.1 613 (((
614 **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
615 )))
Xiaoye 8.1 616
Kilight Cao 14.1 617 (((
618 **//With your question as detailed as possible. We will reply and help you in the shortest.//**
Kilight Cao 15.1 619
Edwin Chen 50.1 620
Xiaoling 117.2 621 = 10. Reference =
Xiaoling 69.6 622
Edwin Chen 50.1 623
Edwin Chen 52.1 624 * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
Edwin Chen 80.1 625 * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
Edwin Chen 50.1 626
Kilight Cao 15.1 627
Kilight Cao 14.1 628 )))
Xiaoye 8.1 629
Xiaoling 117.2 630 = 11. Order Info =
Xiaoye 8.1 631
Xiaoling 69.6 632
Edwin Chen 42.1 633 (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
Xiaoye 8.1 634
Kilight Cao 14.1 635 (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
Xiaoye 8.1 636
Xiaoling 69.6 637 * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
638 * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
639 * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
640 * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
641 * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
642 * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
Xiaoye 8.1 643
Edwin Chen 42.1 644 (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
645
Xiaoling 69.6 646 * (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
647 * (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
648 * (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
649 * (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
Edwin Chen 42.1 650
651 More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
652
653
Xiaoling 117.2 654 = 12. Manufacturer Info =
Xiaoling 69.6 655
Xiaoye 8.1 656
657 **Shenzhen Dragino Technology Development co. LTD**
658
659 Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
660
661 LongCheng Street, LongGang District ; Shenzhen 518116,China
662
663
Xiaoling 117.2 664 = 13. FCC Warning =
Xiaoling 69.6 665
Xiaoye 8.1 666
Xiaoling 69.12 667 (((
Xiaoye 8.1 668 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Xiaoling 69.12 669 )))
Xiaoye 8.1 670
Xiaoling 69.12 671 (((
Xiaoye 8.1 672 ~-~- Reorient or relocate the receiving antenna.
Xiaoling 69.12 673 )))
Xiaoye 8.1 674
Xiaoling 69.12 675 (((
Xiaoye 8.1 676 ~-~- Increase the separation between the equipment and receiver.
Xiaoling 69.12 677 )))
Xiaoye 8.1 678
Xiaoling 69.12 679 (((
Xiaoye 8.1 680 ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Xiaoling 69.12 681 )))
Xiaoye 8.1 682
Xiaoling 69.12 683 (((
Xiaoye 8.1 684 ~-~- Consult the dealer or an experienced radio/TV technician for help.
Xiaoling 69.12 685 )))
Xiaoye 8.1 686
687
Xiaoling 69.12 688 (((
Xiaoye 8.1 689 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Xiaoling 69.12 690 )))
Xiaoye 8.1 691
692
Xiaoling 69.12 693 (((
Xiaoye 8.1 694 The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Xiaoling 83.4 695
696
Xiaoye 8.1 697 )))
Xiaoling 69.12 698 )))